Dynamic Evolution of Copper Nanowires during CO2 Reduction Probed by Operando Electrochemical 4D-STEM and X-ray Spectroscopy

Nanowires have emerged as an important family of one-dimensional (1D) nanomaterials owing to their exceptional optical, electrical, and chemical properties. In particular, Cu nanowires (NWs) show promising applications in catalyzing the challenging electrochemical CO2 reduction reaction (CO2RR) to valuable chemical fuels. Despite early reports showing morphological changes of Cu NWs after CO2RR processes, their structural evolution and the resulting exact nature of active Cu sites remain largely elusive, which calls for the development of multimodal operando time-resolved nm-scale methods. Here, we report that well-defined 1D copper nanowires, with a diameter of around 30 nm, have a metallic 5-fold twinned Cu core and around 4 nm Cu2O shell. Operando electrochemical liquid-cell scanning transmission electron microscopy (EC-STEM) showed that as-synthesized Cu@Cu2O NWs experienced electroreduction of surface Cu2O to disordered (spongy) metallic Cu shell (Cu@CuS NWs) under CO2RR relevant conditions. Cu@CuS NWs further underwent a CO-driven Cu migration leading to a complete evolution to polycrystalline metallic Cu nanograins. Operando electrochemical four-dimensional (4D) STEM in liquid, assisted by machine learning, interrogates the complex structures of Cu nanograin boundaries. Correlative operando synchrotron-based high-energy-resolution X-ray absorption spectroscopy unambiguously probes the electroreduction of Cu@Cu2O to fully metallic Cu nanograins followed by partial reoxidation of surface Cu during postelectrolysis air exposure. This study shows that Cu nanowires evolve into completely different metallic Cu nanograin structures supporting the operando (operating) active sites for the CO2RR.

MgO Heterostructures: From Synthesis to Applications

The energy storage capacity of batteries and supercapacitors has seen rising demand and problems as large-scale energy storage systems and electric gadgets have become more widely adopted. With the development of nano-scale materials, the electrodes of these devices have changed dramatically. Heterostructure materials have gained increased interest as next-generation materials due to their unique interfaces, resilient structures and synergistic effects, providing the capacity to improve energy/power outputs and battery longevity. This review focuses on the role of MgO in heterostructured magnetic and energy storage devices and their applications and synthetic strategies. The role of metal oxides in manufacturing heterostructures has received much attention, especially MgO. Heterostructures have stronger interactions between tightly packed interfaces and perform better than single structures. Due to their typical physical and chemical properties, MgO heterostructures have made a breakthrough in energy storage. In perpendicularly magnetized heterostructures, the MgO's thickness significantly affects the magnetic properties, which is good news for the next generation of high-speed magnetic storage devices.

Phytoassisted synthesis of magnesium oxide nanoparticles from Pterocarpus marsupium rox.b heartwood extract and its biomedical applications

BACKGROUND

Unlike chemical techniques, the combination of metal oxide nanoparticles utilizing plant concentrate is a promising choice. The purpose of this work was to synthesize magnesium oxide nanoparticles (MgO-NPs) utilizing heartwood aqueous extract of Pterocarpus marsupium. The heartwood extract of Pterocarpus marsupium is rich in polyphenolic compounds and flavonoids that can be used as a green source for large-scale, simple, and eco-friendly production of MgO-NPs. The phytoassisted synthesis of MgO is characterized by UV-Visible spectroscopy, X-ray diffraction (XRD), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) with EDS (energy dispersive X-ray spectroscopy), and transmission electron microscopy (TEM).

RESULTS

The formation of MgO-NPs is confirmed by a visual color change from colorless to dark brown and they displayed a wavelength of 310 nm in UV-Spectrophotometry analysis. The crystalline nature of the obtained biosynthesized nanoparticles are revealed by X-ray diffraction analysis. SEM results revealed the synthesized magnesium oxide nanoparticles formed by this cost-effective method are spherically shaped with an average size of < 20 nm. The presence of magnesium and oxygen were confirmed by the EDS data. TEM analysis proved the spherical shape of the nanoparticles with average particle size of 13.28 nm and SAED analysis confirms the crystalline nature of MgO-NPs. FT-IR investigation confirms the existence of the active compounds required to stabilize the magnesium oxide nanoparticles with hydroxyl and carboxyl and phenolic groups that act as reducing, stabilizing, and capping agent. All the nanoparticles vary in particle sizes between 15 and 25 nm and obtained a polydispersity index value of 0.248. The zeta-potential was measured and found to be - 2.9 mV. Further, MgO-NPs were tested for antibacterial action against Staphylococcus aureus (Gram-positive bacteria) and Escherichia coli (Gram-negative bacteria) by minimum inhibitory concentration technique were found to be potent against both the bacteria. The blended nanoparticles showed good antioxidant activity examined by the DPPH radical scavenging method, showed good anti-diabetic activity determined by alpha-amylase inhibitory activity, and displayed strong anti-inflammatory activity evaluated by the albumin denaturation method.

CONCLUSIONS

The investigation reports the eco-friendly, cost-effective method for synthesizing magnesium oxide nanoparticles from Pterocarpus marsupium Rox.b heartwood extract with biomedical applications.

Nanowire Waveguides and Lasers: Advances and Opportunities in Photonic Circuits

Due to their single-crystalline structures, comparatively large aspect ratios, tight optical confinement and smooth surfaces, nanowires have increasingly attracted research interests for both fundamental studies and technological applications in on-chip photonic devices. This class of nanostructures typically have cross-sections of 2~200 nm and lengths upwards of several micrometers, allowing for the bridging of the nanoscopic and macroscopic world. In particular, the lasing behaviors can be established from a nanowire resonator with positive feedback via end-facet reflection, making the nanowire a promising candidate in the next generation of optoelectronics. Consequently, versatile nanowire-based devices ranging from nanoscale coherent lasers, optical sensors, waveguides, optical switching, and photonic networks have been proposed and experimentally demonstrated in the past decade. In this article, significant progresses in the nanowire fabrication, lasers, circuits, and devices are reviewed. First, we focus on the achievements of nanowire synthesis and introduce the basics of nanowire optics. Following the cavity configurations and mode categories, then the different light sources consisting of nanowires are presented. Next, we review the recent progress and current status of functional nanowire devices. Finally, we offer our perspective of nanowires regarding their challenges and future opportunities in photonic circuits.

A novel fabrication of electrospun polyacrylonitrile/NaYF4:Eu+3 light emitting nanofibers

Polyacrylonitrile/NaYF4:Eu+3 nanophosphor composite nanofibers have been successfully prepared using the electrospinning technique. The electrospun nanofibers exhibited intense emission of gradient blue (X 2 = 0.254, Y 2 = 0.152 and X 3 = 0.233, Y 3 = 0.139) with different concentrations of nanophosphor under the excitation wavelength of 239 nm. The morphological and structural characterization of the nanofibers confirms the uniform dispersion of nanophosphor, while photoluminescence spectroscopy confirms tunability in luminescence properties.

Polymer Coated Semiconducting Nanoparticles for Hybrid Materials

This paper reviews synthetic concepts for the functionalization of various inorganic nanoparticles with a shell consisting of organic polymers and possible applications of the resulting hybrid materials. A polymer coating can make inorganic nanoparticles soluble in many solvents as individual particles and not only do low molar mass solvents become suitable, but also polymers as a solid matrix. In the case of shape anisotropic particles (e.g., rods) a spontaneous self-organization (parallel orientation) of the nanoparticles can be achieved, because of the formation of lyotropic liquid crystalline phases. They offer the possibility to orient the shape of anisotropic nanoparticles macroscopically in external electric fields. At least, such hybrid materials allow semiconducting inorganic nanoparticles to be dispersed in functional polymer matrices, like films of semiconducting polymers. Thereby, the inorganic nanoparticles can be electrically connected and addressed by the polymer matrix. This allows LEDs to be prepared with highly fluorescent inorganic nanoparticles (quantum dots) as chromophores. Recent works have aimed to further improve these fascinating light emitting materials.

Computational and Experimental 1H-NMR Study of Hydrated Mg-Based Minerals

Magnesium oxide (MgO) can convert to different magnesium-containing compounds depending on exposure and environmental conditions. Many MgO-based phases contain hydrated species allowing ¹H-nuclear magnetic resonance (NMR) spectroscopy to be used in the characterization and quantification of proton-containing phases; however, surprisingly limited examples have been reported. Here, ¹H-magic angle spinning (MAS) NMR spectra of select Mg-based minerals are presented and assigned. These experimental results are combined with computational NMR density functional theory (DFT) periodic calculations to calibrate the predicted chemical shielding results. This correlation is then used to predict the NMR shielding for a series of different MgO hydroxide, magnesium chloride hydrate, magnesium perchlorate, and magnesium cement compounds to aid in the future assignment of ¹H-NMR spectra for complex Mg phases.

V2O5-Based nanomaterials: synthesis and their applications

Comprehensive depiction the phase-pure V₂O₅ with unique 1D, 2D, and 3D nanostructures. Illustrate the development of carbonaceous materials into the V₂O₅ electrodes. Introduce the cation doped V₂O₅ samples as the cathode material.

Discovery of High-Temperature Superconductivity (Tc = 55 K) in B-Doped Q-Carbon

We have achieved a superconducting transition temperature (T_c) of 55 K in 27 at% B-doped Q-carbon. This value represents a significant improvement over previously reported T_c of 36 K in B-doped Q-carbon and is the highest T_c for conventional BCS (Bardeen-Cooper-Schrieffer) superconductivity in bulk carbon-based materials. The B-doped Q-carbon exhibits type-II superconducting characteristics with H_c2(0) ∼ 10.4 T, consistent with the BCS formalism. The B-doped Q-carbon is formed by nanosecond laser melting of B/C multilayered films in a super undercooled state and subsequent quenching. It is determined that ∼67% of the total boron exists with carbon in a sp³ hybridized state, which is responsible for the substantially enhanced T_c. Through the study of the vibrational modes, we deduce that higher density of states near the Fermi level and moderate to strong electron-phonon coupling lead to a high T_c of 55 K. With these results, we establish that heavy B doping in Q-carbon is the pathway for achieving high-temperature superconductivity.

Growth of high-quality Bi2Sr2 CaCu2O8+δ whiskers and electrical properties of resulting exfoliated flakes

In this work, we demonstrate a simple technique to grow high-quality whiskers of Bi₂ Sr₂ CaCu₂ O_8+δ – a high T_c superconductor. Structural analysis shows the single-crystalline nature of the grown whiskers. To probe electrical properties, we exfoliate these whiskers into thin flakes (~50 nm thick) using the scotch-tape technique and develop a process to realize good electrical contacts. We observe a superconducting critical temperature, T_c, of 86 K. We map the evolution of the critical current as a function of temperature. With 2-D materials emerging as an exciting platform to study low-dimensional physics, our work paves the way for future studies on two-dimensional high-T_c superconductivity.

Growing Oxide Nanowires and Nanowire Networks by Solid State Contact Diffusion into Solution-Processed Thin Films

New techniques to directly grow metal oxide nanowire networks without the need for initial nanoparticle seed deposition or postsynthesis nanowire casting will bridge the gap between bottom-up formation and top-down processing for many electronic, photonic, energy storage, and conversion technologies. Whether etched top-down, or grown from catalyst nanoparticles bottom-up, nanowire growth relies on heterogeneous material seeds. Converting surface oxide films, ubiquitous in the microelectronics industry, to nanowires and nanowire networks by the incorporation of extra species through interdiffusion can provide an alternative deposition method. It is shown that solution-processed thin films of oxides can be converted and recrystallized into nanowires and networks of nanowires by solid-state interdiffusion of ionic species from a mechanically contacted donor substrate. NaVO₃ nanowire networks on smooth Si/SiO₂ and granular fluorine-doped tin oxide surfaces can be formed by low-temperature annealing of a Na diffusion species-containing donor glass to a solution-processed V₂ O₅ thin film, where recrystallization drives nanowire growth according to the crystal habit of the new oxide phase. This technique illustrates a new method for the direct formation of complex metal oxide nanowires on technologically relevant substrates, from smooth semiconductors, to transparent conducting materials and interdigitated device structures.

Study of flux pinning mechanism under hydrostatic pressure in optimally doped (Ba,K)Fe2As2 single crystals

Strong pinning depends on the pinning force strength and number density of effective defects. Using the hydrostatic pressure method, we demonstrate here that hydrostatic pressure of 1.2 GPa can significantly enhance flux pinning or the critical current density (J_c) of optimally doped Ba_0.6K_0.4Fe₂As₂ crystals by a factor of up to 5 in both low and high fields, which is generally rare with other J_c enhancement techniques. At 4.1 K, high pressure can significantly enhance J_c from 5 × 10⁵A/cm² to nearly 10⁶A/cm² at 2 T, and from 2 × 10⁵A/cm² to nearly 5.5 × 10⁵A/cm² at 12 T. Our systematic analysis of the flux pinning mechanism indicates that both the pinning centre number density and the pinning force are greatly increased by the pressure and enhance the pinning. This study also shows that superconducting performance in terms of flux pinning or J_c for optimally doped superconducting materials can be further improved by using pressure.

Relaxation dynamics of vortex lines in disordered type-II superconductors following magnetic field and temperature quenches

We study the effects of rapid temperature and magnetic field changes on the nonequilibrium relaxation dynamics of magnetic vortex lines in disordered type-II superconductors by employing an elastic line model and performing Langevin molecular dynamics simulations. In a previously equilibrated system, either the temperature is suddenly changed or the magnetic field is instantaneously altered which is reflected in adding or removing flux lines to or from the system. The subsequent aging properties are investigated in samples with either randomly distributed pointlike or extended columnar defects, which allows us to distinguish the complex relaxation features that result from either type of pinning centers. One-time observables such as the radius of gyration and the fraction of pinned line elements are employed to characterize steady-state properties, and two-time correlation functions such as the vortex line height autocorrelations and their mean-square displacement are analyzed to study the nonlinear stochastic relaxation dynamics in the aging regime.

Synthesis and characterization studies of MgO:CuO nanocrystals by wet-chemical method

In this report, we examine the progress in adapting these nanomaterials for several predominantly photonics device fabrication by wet-chemical method. Nanocomposite of magnesium oxide (MgO) with copper oxide (CuO) doped nanoparticles were characterized by X-ray powder diffraction (XRD) and the observed peaks are quite agreeable with the pure phase cubic structure. High-resolution transmission electron microscopic (HR-TEM) results reveal that the resultant nanopowders are porous and agglomerated with polycrystalline nano-entities. Field emission of selected-area electron diffraction (SAED) studies showed that the average size of the nanoparticles were 20nm. Photoluminescence spectra of MgO:CuO were investigated, showing emission peaks around 375nm relating to new energy levels induced by defects or defect levels generation and confocal micro-Raman images indicated that the chemical molecular vibrational band structure and morphology of the product which is spherical shaped nanoparticles with an average particle size of ∼25nm with standard deviation. The electrochemical response of MgO:CuO which is proves that the nano-copper/magnesium has high functionality due to the small size and it has higher electrochemical activity without any modifications.

Morphology control in biphasic hybrid systems of semiconducting materials

Simple blends of inorganic nanocrystals and organic (semiconducting) polymers usually lead to macroscopic segregation. Thus, such blends typically exhibit inferior properties than expected. To overcome the problem of segregation, polymer coated nanocrystals (nanocomposites) have been developed. Such nanocomposites are highly miscible within the polymer matrix. In this Review, a summary of synthetic approaches to achieve stable nanocomposites in a semiconducting polymer matrix is presented. Furthermore, a theoretical background as well as an overview concerning morphology control of inorganic NCs in polymer matrices are provided. In addition, the morphologic behavior of highly anisotropic nanoparticles (i.e. liquid crystalline phase formation of nanorod-composites) and branched nanoparticles (spatial orientation of tetrapods) is described. Finally, the morphology requirements for the application of inorganic/organic hybrid systems in light emitting diodes and solar cells are discussed, and potential solutions to achieve the required morphologies are provided.

A comparative study on properties of synthesized MgO with different templates

Magnesium oxide powders have been prepared by simple method using different templates as Hexamine (T1), alkylate-hexamine salt (T2) and alkylate-dihexamine salt (T3). The annealed products were systematically investigated by using X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM) and UV-Visible absorption. It was found that the formation of nanoparticle could involved the role of performed "nucleus" and used template to control the growth rate of nucleuses. The results were shown that different templates affect on the size and species of particles. In this study, the crystallite size of the MgO products were in a range from 4 to 7 nm. The optical band gap of MgO nanoparticles was in the range 4.27-4.77 eV. The morphology of MgO was nanospheres or nanokongelemere-like. In this investigation photocatalytic degradation of Indigo carmine (IC) in water was studied. The effects of some parameters such as pH, amount of catalyst, initial concentration of dye were examined.

A comparative study on the morphological features of highly ordered MgO:AgO nanocube arrays prepared via a hydrothermal method

II–VI semiconductor nanotubes are a recently developed class of nanomaterials whose unique photophysical properties are helping to create a new generation of nanomaterials in the field of photonics and microelectronics.

Solution-processed, barrier-confined, and 1D nanostructure supported quasi-quantum well with large photoluminescence enhancement

Planar substrate supported semiconductor quantum well (QW) structures are not amenable to manipulation in miniature devices, while free-standing QW nanostructures, e.g., ultrathin nanosheets and nanoribbons, suffer from mechanical and environmental instability. Therefore, it is tempting to fashion high-quality QW structures on anisotropic and mechanically robust supporting nanostructures such as nanowires and nanoplates. Herein, we report a solution quasi-heteroepitaxial route for growing a barrier-confined quasi-QW structure (ZnSe/CdSe/ZnSe) on the supporting arms of ZnO nanotetrapods, which have a 1D nanowire structure, through the combination of ion exchange and successive deposition assembly. This resulted in highly crystalline and highly oriented quasi-QWs along the whole axial direction of the arms of the nanotetrapod because a transition buffer layer (Zn(x)Cd(1-x)Se) was formed and in turn reduced the lattice mismatch and surface defects. Significantly, such a barrier-confined QW emits excitonic light ∼17 times stronger than the heterojunction (HJ)-type structure (ZnSe/CdSe, HJ) at the single-particle level. Time-resolved photoluminescence from ensemble QWs exhibits a lifetime of 10 ns, contrasting sharply with ∼300 ps for the control HJ sample. Single-particle PL and Raman spectra suggest that the barrier layer of QW has completely removed the surface trap states on the HJ and restored or upgraded the photoelectric properties of the semiconductor layer. Therefore, this deliberate heteroepitaxial growth protocol on the supporting nanotetrapod has realized a several micrometer long QW structure with high mechanical robustness and high photoelectric quality. We envision that such QWs integrated on 1D nanostructures will largely improve the performance of solar cells and bioprobes, among others.

Photovoltaic properties of ZnO nanorods/p-type Si heterojunction structures

Selected properties of photovoltaic (PV) structures based on n-type zinc oxide nanorods grown by a low temperature hydrothermal method on p-type silicon substrates (100) are investigated. PV structures were covered with thin films of Al doped ZnO grown by atomic layer deposition acting as transparent electrodes. The investigated PV structures differ in terms of the shapes and densities of their nanorods. The best response is observed for the structure containing closely-spaced nanorods, which show light conversion efficiency of 3.6%.

Hydrothermally formed functional niobium oxide doped tungsten nanorods

Nanorod forms of metal oxides are recognized as one of the most remarkable morphologies. Their structure and functionality have driven important advancements in a vast range of electronic devices and applications. In this work, we postulate a novel concept to explain how numerous localized surface states can be engineered into the bandgap of niobium oxide nanorods using tungsten. We discuss their contributions as local state surface charges for the modulation of a Schottky barrier height, the relative dielectric constant and their respective conduction mechanisms. Their effects on hydrogen gas molecule interaction mechanisms are also examined herein. We synthesized niobium tungsten oxide (Nb17W2O25) nanorods via a hydrothermal growth method and evaluated the Schottky barrier height, ideality factor, dielectric constant and trap energy level from the measured I-V versus temperature characteristics in the presence of air and hydrogen to show the validity of our postulations.

One-dimensional metal oxide nanostructures for heterogeneous catalysis

Metal oxides are of paramount importance in heterogeneous catalysis as either supports or active phases. Controlled synthesis of one-dimensional (1D) metal oxide nanostructures has received enormous attention in heterogeneous catalysis due to the possibility of tailoring the properties of metal oxides by tuning their shapes, sizes, and compositions. This feature article highlights recent advances in shape controlled synthesis of 1D metal oxide nanostructures and their applications in heterogeneous catalysis, with the aim of introducing new insights into the heterogeneous catalyst design.

Crafting semiconductor organic-inorganic nanocomposites via placing conjugated polymers in intimate contact with nanocrystals for hybrid solar cells

Semiconductor organic-inorganic hybrid solar cells incorporating conjugated polymers (CPs) and nanocrystals (NCs) offer the potential to deliver efficient energy conversion with low-cost fabrication. The CP-based photovoltaic devices are complimented by an extensive set of advantageous characteristics from CPs and NCs, such as lightweight, flexibility, and solution-processability of CPs, combined with high electron mobility and size-dependent optical properties of NCs. Recent research has witnessed rapid advances in an emerging field of directly tethering CPs on the NC surface to yield an intimately contacted CP-NC nanocomposite possessing a well-defined interface that markedly promotes the dispersion of NCs within the CP matrix, facilitates the photoinduced charge transfer between these two semiconductor components, and provides an effective platform for studying the interfacial charge separation and transport. In this Review, we aim to highlight the recent developments in CP-NC nanocomposite materials, critically examine the viable preparative strategies geared to craft intimate CP-NC nanocomposites and their photovoltaic performance in hybrid solar cells, and finally provide an outlook for future directions of this extraordinarily rich field.

INORGANIC SEMICONDUCTOR NANOWIRES

One-dimensional (1D) nanostructures are ideal systems for investigating the dependence of electrical transport, optical properties and mechanical properties on size and dimensionality. They are expected to play an important role as both interconnects and functional components in the fabrication of nanoscale electronic and optoelectronic devices. This article presents an overview of current research activities that center on nanowires whose lateral dimensions fall anywhere in the range of 1–200 nm. It is organized into three parts: The first part discusses various methods that have been developed for generating nanowires with tightly controlled dimensions, orientations, and well-defined properties. The second part highlights a number of strategies that are being developed for the hierarchical assembly of nanowire building blocks. The third part surveys some of the novel physical properties (e.g., optical, electrical, and mechanical) of these nanostructures. Finally, we conclude with some personal perspectives on the future research directions in this field.

CHEMICAL PREPARATION OF MgO WHISKERS

A useful method is described for the chemical synthesis of high length-radius ratio magnesium oxide ( MgO ) whiskers at ambient temperature. The diameter of MgO whiskers falls in the range of 2–5 μm with a length of 30–50 μm. The length-radius ratio generally falls in the range of 10–30. Energy-dispersive X-ray spectrometer analysis reveals that the whiskers are composed of Mg and O elements. Microscopic morphologies and structures are well studied by scanning electron microscopy and X-ray diffraction. The growth mechanism of MgO whiskers is also proposed on the basis of crystallographic characteristics.

A top-down approach to fabrication of high quality vertical heterostructure nanowire arrays

We demonstrate a novel top-down approach for fabricating nanowires with unprecedented complexity and optical quality by taking advantage of a nanoscale self-masking effect. We realized vertical arrays of nanowires of 20-40 nm in diameter with 16 segments of complex longitudinal InGaAsP/InP structures. The unprecedented high quality of etched wires is evidenced by the narrowest photoluminescence linewidth ever produced in similar wavelengths, indistinguishable from that of the corresponding wafer. This top-down, mask-free, large scale approach is compatible with the established device fabrication processes and could serve as an important alternative to the bottom-up approach, significantly expanding ranges and varieties of applications of nanowire technology.

Solution-Based Synthesis of Magnesium Oxide Nanorods

A solution-based synthesis route was developed to produce large quantities of MgO nanorods. Hydrated basic magnesium chloride, which has needle-like crystal structure, was used as a precursor. A subsequent two-step transformation process with magnesium hydroxide as an intermediate product was used to preserve the morphology of the precursor to yield magnesium oxide nanorods. Scanning electron microscopy, powder X-ray diffraction and energy dispersive X-ray spectroscopy show that the products are very pure (>95%) crystalline MgO nanorods with diameters from 40 nm to 200 nm and lengths 10 microns or longer. High-resolution transmission electron microscopy and electron diffraction further reveal that these MgO nanorods are single crystals and that the rod axis is along the <110> crystal direction. A model for the structural transformation from hydrated basic magnesium chloride to magnesium oxide has been developed and compared to our experimental results. This solution-based process can be easily scaled-up, and is a low-cost source of pure magnesium oxide nanorods needed in many industrial applications, for example, as reinforcing agents in matrix composites and as flux-pinning centers in high-TC superconductors.

Investigation of initial growth of ZnO nanowires and their growth mechanism

ZnO nanowires were synthesized on Si substrates by a simple metal vapor deposition method without any catalysts. The initial growth and the growth mechanism of the ZnO nanowires were studied using scanning and transmission electron microscopy. We found that the ZnO nanowires grew on the Si substrate via a self-seeding vapor-solid mechanism. The growth process of the ZnO nanowires consisted of four steps: self-seeding, one-dimensional epitaxial growth of the nanowires on the seeds by a base-growth mode, further acceleration of nanowire growth with additional seeding, and active formation of the nanowires.

Achieving the theoretical depairing current limit in superconducting nanomesh films

We show the theoretical depairing current limit can be achieved in a robust fashion in highly ordered superconductor nanomesh films having spatial periodicities smaller than both the superconducting coherence length and the magnetic penetration depth. For a niobium nanomesh film with 34 nm spatial periodicity, the experimental critical current density is enhanced by more than 17 times over the continuous film and is in good agreement with the depairing limit over the entire measured temperature range. The nanomesh superconductors are also less susceptible to thermal fluctuations when compared to nanowire superconductors. T(c) values similar to the bulk film are achieved, and the nanomeshes are capable of retaining superconductivity to higher fields relative to the bulk. In addition, periodic oscillations in T(c) are observed as a function of field, reflecting the highly ordered nanomesh structure.

Semiconductor nanowire: what's next?

In this perspective, we take a critical look at the research progress within the nanowire community for the past decade. We discuss issues on the discovery of fundamentally new phenomena versus performance benchmarking for many of the nanowire applications. We also notice that both the bottom-up and top-down approaches have played important roles in advancing our fundamental understanding of this new class of nanostructures. Finally we attempt to look into the future and offer our personal opinions on what the future trends will be in nanowire research.