Thermotoga neapolitana homotetrameric xylose isomerase is expressed as a catalytically active and thermostable dimer in Escherichia coli

Xylose isomerase from Piromyces sp. E2 is a promiscuous enzyme with epimerase activity

Xylose isomerase catalyzes the isomerization of D-xylose to D-xylulose with promiscuous activity for other saccharides including D-glucose, D-allose, and L-arabinose. The xylose isomerase from the fungus Piromyces sp. E2 (PirE2_XI) is used to engineer xylose usage by the fermenting yeast Saccharomyces cerevisiae, but its biochemical characterization is poorly understood with divergent catalytic parameters reported. We have measured the kinetic parameters of the PirE2_XI and analyzed its thermostability and pH-dependence towards different substrates. The PirE2_XI shows promiscuous activity towards D-xylose, D-glucose, D-ribose and L-arabinose with variable effects depending on different divalent ions and epimerizes D-xylose at C3 to produce D-ribulose in a substrate/product dependent ratio. The enzyme follows Michaelis-Menten kinetics for the substrates used and although K_M values for D-xylose are comparable at 30 and 60 °C, the k_cat/K_M is three-fold greater at 60 °C. The purified PirE2_XI shows maximal activity at 65 °C in the pH range of 6.5-7.5 and is a thermostable enzyme, maintaining full activity over 48 h at 30 °C or 12 h at 60 °C. This is the first report demonstrating epimerase activity of the PirE2_XI and its ability to isomerize D-ribose and L-arabinose, and provides a comprehensive in vitro study of substrate specificity, effect of metal ions and temperature on enzyme activity and these findings advance the knowledge of the mechanism of action of this enzyme.

Directed evolution and secretory expression of xylose isomerase for improved utilisation of xylose in Saccharomyces cerevisiae

BACKGROUND

Xylose contained in lignocellulosic biomass is an attractive carbon substrate for economically viable conversion to bioethanol. Extensive research has been conducted on xylose fermentation using recombinant Saccharomyces cerevisiae expressing xylose isomerase (XI) and xylose reductase/xylitol dehydrogenase (XR/XDH) pathways along with the introduction of a xylose transporter and amplification of the downstream pathway. However, the low utilization of xylose in the presence of glucose, due to the varying preference for cellular uptake, is a lingering challenge. Studies so far have mainly focused on xylose utilization inside the cells, but there have been little trials on the conversion of xylose to xylulose by cell before uptake. We hypothesized that the extracellular conversion of xylose to xylulose before uptake would facilitate better utilization of xylose even in the presence of glucose. To verify this, XI from Piromyces sp. was engineered and hyper-secreted in S. cerevisiae for the extracellular conversion of xylose to xylulose.

RESULTS

The optimal pH of XI was lowered from 7.0 to 5.0 by directed evolution to ensure its high activity under the acidic conditions used for yeast fermentation, and hyper-secretion of an engineered XI-76 mutant (E56A and I252M) was accomplished by employing target protein-specific translational fusion partners. The purified XI-76 showed twofold higher activity than that of the wild type at pH 5. The secretory expression of XI-76 in the previously developed xylose utilizing yeast strain, SR8 increased xylose consumption and ethanol production by approximately 7-20% and 15-20% in xylose fermentation and glucose and xylose co-fermentation, respectively.

CONCLUSIONS

Isomerisation of xylose to xylulose before uptake using extracellular XI was found to be effective in xylose fermentation or glucose/xylose co-fermentation. This suggested that glucose competed less with xylulose than with xylose for uptake by the cell. Consequently, the engineered XI secretion system constructed in this study can pave the way for simultaneous utilization of C5/C6 sugars from the sustainable lignocellulosic biomass.

Parageobacillus thermantarcticus, an Antarctic Cell Factory: From Crop Residue Valorization by Green Chemistry to Astrobiology Studies

Knowledge of Antarctic habitat biodiversity, both marine and terrestrial, has increased considerably in recent years, causing considerable development in the studies of life science related to Antarctica. In the Austral summer 1986–1987, a new thermophilic bacterium, Parageobacillus thermantarcticus strain M1 was isolated from geothermal soil of the crater of Mount Melbourne (74°22′ S, 164°40′ E) during the Italian Antarctic Expedition. In addition to the biotechnological potential due to the production of exopolysaccharides and thermostable enzymes, successful studies have demonstrated its use in the green chemistry for the transformation and valorization of residual biomass and its employment as a suitable microbial model for astrobiology studies. The recent acquisition of its genome sequence opens up new opportunities for the use of this versatile bacterium in still unexplored biotechnology sectors.

D-xylose isomerase from a marine bacterium, Vibrio sp. strain XY-214, and D-xylulose production from β-1,3-xylan

The xylA gene from a marine bacterium, Vibrio sp. strain XY-214, encoding D-xylose isomerase (XylA) was cloned and expressed in Escherichia coli. The xylA gene consisted of 1,320-bp nucleotides encoding a protein of 439 amino acids with a predicted molecular weight of 49,264. XylA was classified into group II xylose isomerases. The native XylA was estimated to be a homotetramer with a molecular mass of 190 kDa. The purified recombinant XylA exhibited maximal activity at 60°C and pH 7.5. Its apparent K (m) values for D-xylose and D-glucose were 7.93 and 187 mM, respectively. Furthermore, we carried out D-xylulose production from β-1,3-xylan, a major cell wall polysaccharide component of the killer alga Caulerpa taxifolia. The synergistic action of β-1,3-xylanase (TxyA) and β-1,3-xylosidase (XloA) from Vibrio sp. strain XY-214 enabled efficient saccharification of β-1,3-xylan to D-xylose. D-xylose was then converted to D-xylulose by using XylA from the strain XY-214. The conversion rate of D-xylose to D-xylulose by XylA was found to be approximately 40% in the presence of 4 mM sodium tetraborate after 2 h of incubation. These results demonstrated that TxyA, XloA, and XylA from Vibrio sp. strain XY-214 are useful tools for D-xylulose production from β-1,3-xylan. Because D-xylulose can be used as a source for ethanol fermentation by yeast Saccharomyces cerevisiae, the present study will provide a basis for ethanol production from β-1,3-xylan.

N-terminal fusion of a hyperthermophilic chitin-binding domain to xylose isomerase from Thermotoga neapolitana enhances kinetics and thermostability of both free and immobilized enzymes

Immobilization of a thermostable D-xylose isomerase (EC 5.3.1.5) from Thermotoga neapolitana 5068 (TNXI) on chitin beads was accomplished via a N-terminal fusion with a chitin-binding domain (CBD) from a hyperthermophilic chitinase produced by Pyrococcus furiosus (PF1233) to create a fusion protein (CBD-TNXI). The turnover numbers for glucose to fructose conversion for both unbound and immobilized CBD-TNXI were greater than the wild-type enzyme: k(cat) (min(-1)) was approximately 1,000, 3,800, and 5,800 at 80 degrees C compared to 1,140, 10,350, and 7,000 at 90 degrees C, for the wild-type, unbound, and immobilized enzymes, respectively. These k(cat) values for the glucose to fructose isomerization measured are the highest reported to date for any XI at any temperature. Enzyme kinetic inactivation at 100 degrees C, as determined from a bi-phasic inactivation model, showed that the CBD-TNXI bound to chitin had a half-life approximately three times longer than the soluble wild-type TNXI (19.9 hours vs. 6.8 hours, respectively). Surprisingly, the unbound soluble CBD-TNXI had a significantly longer half-life (56.5 hours) than the immobilized enzyme. Molecular modeling results suggest that the N-terminal fusion impacted subunit interactions, thereby contributing to the enhanced thermostability of both the unbound and immobilized CBD-TNXI. These interactions likely also played a role in modifying active site structure, thereby diminishing substrate-binding affinities and generating higher turnover rates in the unbound fusion protein.

Extreme environments as a resource for microorganisms and novel biocatalysts

The steady increase in the number of newly isolated extremophilic microorganisms and the discovery of their enzymes by academic and industrial institutions underlines the enormous potential of extremophiles for application in future biotechnological processes. Enzymes from extremophilic microorganisms offer versatile tools for sustainable developments in a variety of industrial application as they show important environmental benefits due to their biodegradability, specific stability under extreme conditions, improved use of raw materials and decreased amount of waste products. Although major advances have been made in the last decade, our knowledge of the physiology, metabolism, enzymology and genetics of this fascinating group of extremophilic microorganisms and their related enzymes is still limited. In-depth information on the molecular properties of the enzymes and their genes, however, has to be obtained to analyze the structure and function of proteins that are catalytically active around the boiling and freezing points of water and extremes of pH. New techniques, such as genomics, metanogenomics, DNA evolution and gene shuffling, will lead to the production of enzymes that are highly specific for countless industrial applications. Due to the unusual properties of enzymes from extremophiles, they are expected to optimize already existing processes or even develop new sustainable technologies.

Influence of divalent cations on the structural thermostability and thermal inactivation kinetics of class II xylose isomerases

The effects of divalent metal cations on structural thermostability and the inactivation kinetics of homologous class II d-xylose isomerases (XI; EC 5.3.1.5) from mesophilic (Escherichia coli and Bacillus licheniformis), thermophilic (Thermoanaerobacterium thermosulfurigenes), and hyperthermophilic (Thermotoga neapolitana) bacteria were examined. Unlike the three less thermophilic XIs that were substantially structurally stabilized in the presence of Co2+ or Mn2+ (and Mg2+ to a lesser extent), the melting temperature [(Tm) approximately 100 degrees C] of T. neapolitana XI (TNXI) varied little in the presence or absence of a single type of metal. In the presence of any two of these metals, TNXI exhibited a second melting transition between 110 degrees C and 114 degrees C. TNXI kinetic inactivation, which was non-first order, could be modeled as a two-step sequential process. TNXI inactivation in the presence of 5 mm metal at 99-100 degrees C was slowest in the presence of Mn2+[half-life (t(1/2)) of 84 min], compared to Co2+ (t(1/2) of 14 min) and Mg2+ (t(1/2) of 2 min). While adding Co2+ to Mg2+ increased TNXI's t(1/2) at 99-100 degrees C from 2 to 7.5 min, TNXI showed no significant activity at temperatures above the first melting transition. The results reported here suggest that, unlike the other class II XIs examined, single metals are required for TNXI activity, but are not essential for its structural thermostability. The structural form corresponding to the second melting transition of TNXI in the presence of two metals is not known, but likely results from cooperative interactions between dissimilar metals in the two metal binding sites.

Restoration of a defective Lactococcus lactis xylose isomerase

The genes (xylA) encoding xylose isomerase (XI) from two Lactococcus lactis subsp. lactis strains, 210 (Xyl(-)) and IO-1 (Xyl(+)), were cloned, and the activities of their expressed proteins in recombinant strains of Escherichia coli were investigated. The nucleotide and amino acid sequence homologies between the xylA genes were 98.4 and 98.6%, respectively, and only six amino acid residues differed between the two XIs. The purified IO-1 XI was soluble with K(m) and k(cat) being 2.25 mM and 184/s, respectively, while the 210 XI was insoluble and inactive. Site-directed mutagenesis on 210 xylA showed that a triple mutant possessing R202M/Y218D/V275A mutations regained XI activity and was soluble. The K(m) and k(cat) of this mutant were 4.15 mM and 141/s, respectively. One of the IO-1 XI mutants, S388T, was insoluble and showed negligible activity similar to that of 210 XI. The introduction of a K407E mutation to the IO-1 S388T XI mutant restored its activity and solubility. The dissolution of XI activity in L. lactis subsp. lactis involves a series of mutations that collectively eliminate enzyme activity by reducing the solubility of the enzyme.

Novel reactions of l-rhamnose isomerase from Pseudomonas stutzeri and its relation with d-xylose isomerase via substrate specificity

Escherichia coli strain JM 109 harboring 6 x His-tag L-rhamnose isomerase (L-RhI) from Pseudomonas stutzeri allowed a 20-fold increase in the volumetric yield of soluble enzyme compared to the value for the intrinsic yield. Detailed studies on the substrate specificity of the purified His-tagged protein revealed that it catalyzed previously unknown common and rare aldo/ketotetrose, aldo/ketopentose, and aldo/ketohexose substrates in both D- and L-forms, for instance, erythrose, threose, xylose, lyxose, ribose, glucose, mannose, galactose, altrose, tagatose, sorbose, psicose, and fructose. Using a high enzyme-substrate ratio in extended reactions, the enzyme-catalyzed interconversion reactions from which two different products from one substrate were formed: L-lyxose, L-glucose, L-tagatose and D-allose were isomerized to L-xylulose and L-xylose, L-fructose and L-mannose, L-galactose and L-talose, and D-psicose and D-altrose, in that order. Kinetic studies, however, showed that L-rhamnose with Km and Vmax values of 11 mM and 240 U/mg, respectively, was the most preferred substrate, followed by L-mannose, L-lyxose, D-ribose, and D-allose. Based on the observed catalytic mode of action, these new findings reflected a hitherto undetected interrelation between L-RhI and D-xylose isomerase (D-XI).

Glucose-to-fructose conversion at high temperatures with xylose (glucose) isomerases from Streptomyces murinus and two hyperthermophilic Thermotoga species

The conversion of glucose to fructose at elevated temperatures, as catalyzed by soluble and immobilized xylose (glucose) isomerases from the hyperthermophiles Thermotoga maritima (TMGI) and Thermotoga neapolitana 5068 (TNGI) and from the mesophile Streptomyces murinus (SMGI), was examined. At pH 7.0 in the presence of Mg(2+), the temperature optima for the three soluble enzymes were 85 degrees C (SMGI), 95 degrees to 100 degrees C (TNGI), and >100 degrees C (TMGI). Under certain conditions, soluble forms of the three enzymes exhibited an unusual, multiphasic inactivation behavior in which the decay rate slowed considerably after an initial rapid decline. However, the inactivation of the enzymes covalently immobilized to glass beads, monophasic in most cases, was characterized by a first-order decay rate intermediate between those of the initial rapid and slower phases for the soluble enzymes. Enzyme productivities for the three immobilized GIs were determined experimentally in the presence of Mg(2+). The highest productivities measured were 750 and 760 kg fructose per kilogram SMGI at 60 degrees C and 70 degrees C, respectively. The highest productivity for both TMGI and TNGI in the presence of Mg(2+) occurred at 70 degrees C, pH 7.0, with approximately 230 and 200 kg fructose per kilogram enzyme for TNGI and TMGI, respectively. At 80 degrees C and in the presence of Mg(2+), productivities for the three enzymes ranged from 31 to 273. A simple mathematical model, which accounted for thermal effects on kinetics, glucose-fructose equilibrium, and enzyme inactivation, was used to examine the potential for high-fructose corn syrup (HFCS) production at 80 degrees C and above using TNGI and SMGI under optimal conditions, which included the presence of both Co(2+) and Mg(2+). In the presence of both cations, these enzymes showed the potential to catalyze glucose-to-fructose conversion at 80 degrees C with estimated lifetime productivities on the order of 2000 kg fructose per kilogram enzyme, a value competitive with enzymes currently used at 55 degrees to 65 degrees C, but with the additional advantage of higher fructose concentrations. At 90 degrees C, the estimated productivity for SMGI dropped to 200, whereas, for TNGI, lifetime productivities on the order of 1000 were estimated. Assuming that the most favorable biocatalytic and thermostability features of these enzymes can be captured in immobilized form and the chemical lability of substrates and products can be minimized, HFCS production at high temperatures could be used to achieve higher fructose concentrations as well as create alternative processing strategies.

Bivalent cations and amino-acid composition contribute to the thermostability of Bacillus licheniformis xylose isomerase

Comparative analysis of genome sequence data from mesophilic and hyperthermophilic micro-organisms has revealed a strong bias against specific thermolabile amino-acid residues (i.e. N and Q) in hyperthermophilic proteins. The N + Q content of class II xylose isomerases (XIs) from mesophiles, moderate thermophiles, and hyperthermophiles was examined. It was found to correlate inversely with the growth temperature of the source organism in all cases examined, except for the previously uncharacterized XI from Bacillus licheniformis DSM13 (BLXI), which had an N + Q content comparable to that of homologs from much more thermophilic sources. To determine whether BLXI behaves as a thermostable enzyme, it was expressed in Escherichia coli, and the thermostability and activity properties of the recombinant enzyme were studied. Indeed, it was optimally active at 70-72 degrees C, which is significantly higher than the optimal growth temperature (37 degrees C) of B. licheniformis. The kinetic properties of BLXI, determined at 60 degrees C with glucose and xylose as substrates, were comparable to those of other class II XIs. The stability of BLXI was dependent on the metallic cation present in its two metal-binding sites. The enzyme thermostability increased in the order apoenzyme < Mg2+-enzyme < Co2+-enzyme approximately Mn2+-enzyme, with melting temperatures of 50.3 degrees C, 53.3 degrees C, 73.4 degrees C, and 73.6 degrees C. BLXI inactivation was first-order in all conditions examined. The energy of activation for irreversible inactivation was also strongly influenced by the metal present, ranging from 342 kJ x mol(-1) (apoenzyme) to 604 kJ x mol(-1) (Mg2+-enzyme) to 1166 kJ x mol(-1) (Co2+-enzyme). These results suggest that the first irreversible event in BLXI unfolding is the release of one or both of its metals from the active site. Although N + Q content was an indicator of thermostability for class II XIs, this pattern may not hold for other sets of homologous enzymes. In fact, the extremely thermostable alpha-amylase from B. licheniformis was found to have an average N + Q content compared with homologous enzymes from a variety of mesophilic and thermophilic sources. Thus, it would appear that protein thermostability is a function of more complex molecular determinants than amino-acid content alone.

The structure of rhamnose isomerase from Escherichia coli and its relation with xylose isomerase illustrates a change between inter and intra-subunit complementation during evolution

Using a new expression construct, rhamnose isomerase from Escherichia coli was purified and crystallized. The crystal structure was solved by multiple isomorphous replacement and refined to a crystallographic residual of 17.4 % at 1.6 A resolution. Rhamnose isomerase is a tight tetramer of four (beta/alpha)(8)-barrels. A comparison with other known structures reveals that rhamnose isomerase is most similar to xylose isomerase. Alignment of the sequences of the two enzymes based on their structures reveals a hitherto undetected sequence identity of 13 %, suggesting that the two enzymes evolved from a common precursor. The structure and arrangement of the (beta/alpha)(8)-barrels of rhamnose isomerase are very similar to xylose isomerase. Each enzyme does, however, have additional alpha-helical domains, which are involved in tetramer association, and largely differ in structure. The structures of complexes of rhamnose isomerase with the inhibitor l-rhamnitol and the natural substrate l-rhamnose were determined and suggest that an extended loop, which is disordered in the native enzyme, becomes ordered on substrate binding, and may exclude bulk solvent during catalysis. Unlike xylose isomerase, this loop does not extend across a subunit interface but contributes to the active site of its own subunit. It illustrates how an interconversion between inter and intra-subunit complementation can occur during evolution. In the crystal structure (although not necessarily in vivo) rhamnose isomerase appears to bind Zn(2+) at a "structural" site. In the presence of substrate the enzyme also binds Mn(2+) at a nearby "catalytic" site. An array of hydrophobic residues, not present in xylose isomerase, is likely to be responsible for the recognition of l-rhamnose as a substrate. The available structural data suggest that a metal-mediated hydride-shift mechanism, which is generally favored for xylose isomerase, is also feasible for rhamnose isomerase.

Extremozymes

Extremozymes offer new opportunities for biocatalysis and biotransformations as a result of their extreme stability. From recent work, major approaches to extending the range of applications of extremozymes have emerged. Both the discovery of new extremophilic species and the determination of genome sequences provide a route to new enzymes, with the possibility that these will lead to novel applications. Of equal importance, protein engineering and directed evolution provide approaches to improve enzyme stability and modify specificity in ways that may not exist in the natural world.