Investigating microbial (micro)colony heterogeneity by vibrational spectroscopy

Illuminating the Tiny World: A Navigation Guide for Proper Raman Studies on Microorganisms

Raman spectroscopy is an emerging method for the identification of bacteria. Nevertheless, a lot of different parameters need to be considered to establish a reliable database capable of identifying real-world samples such as medical or environmental probes. In this review, the establishment of such reliable databases with the proper design in microbiological Raman studies is demonstrated, shining a light into all the parts that require attention. Aspects such as the strain selection, sample preparation and isolation requirements, the phenotypic influence, measurement strategies, as well as the statistical approaches for discrimination of bacteria, are presented. Furthermore, the influence of these aspects on spectra quality, result accuracy, and read-out are discussed. The aim of this review is to serve as a guide for the design of microbiological Raman studies that can support the establishment of this method in different fields.

Surface-enhanced Raman spectroscopy (SERS) for monitoring colistin-resistant and susceptible E. coli strains

The emergence of drug-resistant bacteria is a precarious global health concern. In this study, surface-enhanced Raman spectroscopy (SERS) is used to characterize colistin-resistant and susceptible E. coli strains based on their distinguished SERS spectral features for the development of rapid and cost-effective detection and differentiation methods. For this purpose, three colistin-resistant and three colistin susceptible E. coli strains were analyzed by comparing their SERS spectral signatures. Moreover, multivariate data analysis techniques including Principal component analysis (PCA) and Partial Least Squares-Discriminant Analysis (PLS-DA) were used to examine the SERS spectral data of colistin-resistant and susceptible strains. PCA technique was employed for differentiating colistin susceptible and resistant E.coli strains due to alteration in biochemical compositions of the bacterial cell. PLS-DA is employed on SERS spectral data sets for discrimination of these resistant and susceptible E. coli strains with 100% specificity, 100% accuracy, 99.8% sensitivity, and 86% area under receiver operating characteristics (AUROC) curve.

Near infrared spectroscopy (NIRS) coupled with chemometric methods to identify and estimate taxonomic relationships of flies with forensic potential (Diptera: Calliphoridae and Sarcophagidae)

Infrared spectroscopy has been gaining prominence in entomology, such as for solving taxonomic problems, sexing adult specimens, determining the age of immature specimens, detecting drugs of abuse in fly larvae, and can be an important technique in Forensic Entomology. In order to help identify the species of Calliphoridae and Sarcophagidae families, the present study aimed to evaluate the use of near infrared spectroscopy (NIRS) coupled with chemometric methods for separating fly specimens into taxonomic categories and understanding the taxonomic relationship between them. Spectra collected from nine species of flies were subjected to unsupervised principal component analysis (PCA) and hierarchical cluster analysis (HCA), in which we sought to visualize the relationship between the samples (segregation of genera and families) with subsequent identification. In PCA, the best model was achieved using five principal components (PCs), which explained 99.16% of total variance of the original data set. The first principal component (PC1) and the fourth principal component (PC4) provided the best segregation, the latter being more important in the segregation of the species Chrysomya albiceps, Lucilia eximia, and Ravinia belforti from the others. In the HCA dendrogram, there was a clear separation between the specimens by family (Calliphoridae and Sarcophagidae) and genera (Chrysomya, Lucilia, Oxysarcodexia, Peckia and Ravinia). This study shows that NIRS is efficient to identify flies' taxonomic properties, such as family and genera, providing quick evidence for the tested species identity.

Raman Spectroscopy—A Novel Method for Identification and Characterization of Microbes on a Single-Cell Level in Clinical Settings

Rapid and accurate identification of pathogens causing infections is one of the biggest challenges in medicine. Timely identification of causative agents and their antimicrobial resistance profile can significantly improve the management of infection, lower costs for healthcare, mitigate ever-growing antimicrobial resistance and in many cases, save lives. Raman spectroscopy was shown to be a useful—quick, non-invasive, and non-destructive —tool for identifying microbes from solid and liquid media. Modifications of Raman spectroscopy and/or pretreatment of samples allow single-cell analyses and identification of microbes from various samples. It was shown that those non-culture-based approaches could also detect antimicrobial resistance. Moreover, recent studies suggest that a combination of Raman spectroscopy with optical tweezers has the potential to identify microbes directly from human body fluids. This review aims to summarize recent advances in non-culture-based approaches of identification of microbes and their virulence factors, including antimicrobial resistance, using methods based on Raman spectroscopy in the context of possible use in the future point-of-care diagnostic process.

Fiber Probe-Based Raman Spectroscopic Identification of Pathogenic Infection Microorganisms on Agar Plates

Rapid identification of microorganisms is clinically meaningful, and it helps to decelerate the spread of drug resistance and improve patient treatment. In this study, we present a rapid fiber probe-based Raman technique with an excitation wavelength of 785 nm, which is applied to classify and identify nine different species of microorganisms. The cost-effective fiber probe compresses the dimension of the system and provides a more reliable and stable database. All microorganisms were simply cultivated on Luria-Bertani (LB) agar, and Raman spectra were obtained directly from the microbial colonies with the fiber probe within 30 s. The classification model consists of principal component analysis (PCA) in combination with linear discriminant analysis (LDA) and was examined by applying leave-one-batch-out cross-validation (LOBOCV). This model achieved an accuracy of 98.9%. In addition, the validation and identification processes based on independent replicates achieved accuracies of 99.8% and 100%, respectively. The results demonstrated that fiber probe Raman spectroscopy in combination with chemometric analysis allowed a rapid classification and identification of microorganisms only with a normal culture. Therefore, it is promising especially for medical applications and could moreover be helpful to investigate and identify microorganisms rapidly in further studies.

Raman spectroscopy-a tool for rapid differentiation among microbes causing urinary tract infections

Urinary tract infections belong to the most common infections in the world. Besides community-acquired infections, nosocomial infections pose a high risk especially for patients having indwelling catheters, undergoing urological surgeries or staying at hospital for prolonged time. They can be often complicated by antimicrobial resistance and/or biofilm formation. Therefore, a rapid diagnostic tool enabling timely identification of a causative agent and its susceptibility to antimicrobials is a need. Raman spectroscopy appears to be a suitable method that allows rapid differentiation among microbes and provides a space for further analyses, such as determination of capability of biofilm formation or antimicrobial susceptibility/resistance in tested strains. Our work here presents a possibility to differ among most common microbes causing urinary tract infections (belonging to 20 species). We tested 254 strains directly from colonies grown on Mueller-Hinton agar plates. The results show that it is possible to distinguish among the tested species using Raman spectroscopy, which proves its great potential for future use in clinical diagnostics. Moreover, we present here a pilot study of a real-time analysis and identification (in less than 10 min) of single microbial cells directly in urine employing optical tweezers combined with Raman spectroscopy.

Intra-Ramanome Correlation Analysis Unveils Metabolite Conversion Network from an Isogenic Population of Cells

To reveal the dynamic features of cellular systems, such as the correlation among phenotypes, a time or condition series set of samples is typically required. Here, we propose intra-ramanome correlation analysis (IRCA) to achieve this goal from just one snapshot of an isogenic population, via pairwise correlation among the cells of the thousands of Raman peaks in single-cell Raman spectra (SCRS), i.e., by taking advantage of the intrinsic metabolic heterogeneity among individual cells. For example, IRCA of Chlamydomonas reinhardtii under nitrogen depletion revealed metabolite conversions at each time point plus their temporal dynamics, such as protein-to-starch conversion followed by starch-to-triacylglycerol (TAG) conversion, and conversion of membrane lipids to TAG. Such among-cell correlations in SCRS vanished when the starch-biosynthesis pathway was knocked out yet were fully restored by genetic complementation. Extension of IRCA to 64 microalgal, fungal, and bacterial ramanomes suggests the IRCA-derived metabolite conversion network as an intrinsic metabolic signature of isogenic cellular population that is reliable, species-resolved, and state-sensitive. The high-throughput, low cost, excellent scalability, and general extendibility of IRCA suggest its broad applications.

Fourier Transform Infrared Spectroscopy: An Innovative Method for the Diagnosis of Ovarian Cancer

Ovarian cancer is the most lethal gynecologic malignancy due to the late diagnoses at advanced stages, drug resistance and the high recurrence rate. Thus, there is an urgent need to develop new techniques to diagnose and monitor ovarian cancer patients. Fourier transform infrared (FTIR) spectroscopy has great potential in the diagnosis of this disease, as well as the real-time monitoring of cancer development and chemoresistance. As a noninvasive, simple and convenient technique, it can not only distinguish the molecular differences between normal and malignant tissues, but also be used to identify the characteristics of different types of ovarian cancer. FTIR spectroscopy is also widely used in monitoring cancer cells in response to antitumor drugs, distinguishing cells in different growth states, and identifying new synthetic drugs. In this paper, the applications of FTIR spectroscopy for ovarian cancer diagnosis and other works carried out so far are described in detail.

Toxicity mechanism of Cu2+ ion individually and in combination with Zn2+ ion in characterizing the molecular changes of Staphylococcus aureus studied using FTIR coupled with chemometric analysis

Copper and zinc have a high binding affinity with a Staphylococcus aureus bacterial community. This causes a change in the biomolecular composition of S. aureus. Our study aims at understanding the resistance mechanism of Cu and Zn either or in various combinations using FTIR and chemometric techniques. Zn toxicity resulted in a significant change in lipid content (3100-2800 cm^-1) compared to Cu. A significant decrease in protein content is observed for Cu treatment in the amide region. The bio-concentration factor shows a higher value for Cu compared to Zn. The increase in band area of carbohydrates moieties 1059 cm^-1 shows the secretion of EPS due to Cu toxicity. A significant change in nucleic acid compositions was noted in the region1200-900 cm^-1 due to Zn treatment. Secondary structural change in protein shows β sheet formation. The result of the finding shows Cu has greater toxicity than Zn. Further toxicity effects were greatly enhanced for metal mixtures ratio (Cu:2Zn). This shows Zn exhibits synergism effect with Cu. The obtained ROC (receiver operating characteristic) curve area gives good reliability of the experiments. The study attempts to understand the mechanism of toxicity removal of Cu and Zn metal mixtures by bacterial population using FTIR coupled with chemometric techniques. Graphical abstract.

FTIR micro-spectroscopy using synchrotron-based and thermal source-based radiation for probing live bacteria

Fourier transform infrared (FTIR) spectroscopy has proven to be a non-invasive tool to analyse cells without the hurdle of employing exogenous dyes or probes. Nevertheless, the study of single live bacteria in their aqueous environment has long remained a big challenge, due to the strong infrared absorption of water and the small size of bacteria compared to the micron-range infrared wavelengths of the probing photons. To record infrared spectra of bacteria in an aqueous environment, at different spatial resolutions, two setups were developed. A custom-built attenuated total reflection inverted microscope was coupled to a synchrotron-based FTIR spectrometer, using a germanium hemisphere. With such a setup, a projected spot size of 1 × 1 μm² was achieved, which allowed spectral acquisition at the single-cell level in the 1800-1300 cm^-1 region. The second setup used a demountable liquid micro-chamber with a thermal source-powered FTIR microscope, in transmission geometry, for probing clusters of a few thousands of live cells in the mid-IR region (4000-975 cm^-1). Both setups were applied for studying two strains of a model lactic acid bacterium exhibiting different cryo-resistances. The two approaches allowed the discrimination of both strains and revealed population heterogeneity among bacteria at different spatial resolutions. The multivariate analysis of spectra indicated that the cryo-sensitive cells presented the highest cell heterogeneity and the highest content of proteins with the α-helix structure. Furthermore, the results from clusters of bacterial cells evidenced phosphate and peptidoglycan vibrational bands associated with the cell envelope, as potential markers of resistance to environmental conditions. Graphical Abstract.

Biochemical characterization of pathogenic bacterial species using Raman spectroscopy and discrimination model based on selected spectral features

This study aimed to evaluate the differences in the Raman spectra of nine clinical species of bacteria isolated from infections (three Gram-positive and six Gram-negative species), correlating the spectra with the chemical composition of each species and to develop a classification model through discriminant analysis to categorize each bacterial strain using the peaks with the most significant differences. Bacteria were cultured in Mueller Hinton agar and a sample of biomass was harvested and placed in an aluminum sample holder. A total of 475 spectra from 115 different strains were obtained through a dispersive Raman spectrometer (830 nm) with exposure time of 50 s. The intensities of the peaks were evaluated by one-way analysis of variance (ANOVA) and the peaks with significant differences were related to the differences in the biochemical composition of the strains. Discriminant analysis based on quadratic distance applied to the peaks with the most significant differences and partial least squares applied to the whole spectrum showed 89.5% and 90.1% of global accuracy, respectively, for classification of the spectra in all the groups. Raman spectroscopy could be a promising technique to identify spectral differences related to the biochemical content of pathogenic microorganisms and to provide a faster diagnosis of infectious diseases.

The FT-IR and Raman Spectroscopies as Tools for Biofilm Characterization Created by Cariogenic Streptococci

Fourier transform infrared (FT-IR) and Raman spectroscopy and mapping were applied to the analysis of biofilms produced by bacteria of the genus Streptococcus. Bacterial biofilm, also called dental plaque, is the main cause of periodontal disease and tooth decay. It consists of a complex microbial community embedded in an extracellular matrix composed of highly hydrated extracellular polymeric substances and is a combination of salivary and bacterial proteins, lipids, polysaccharides, nucleic acids, and inorganic ions. This study confirms the value of Raman and FT-IR spectroscopies in biology, medicine, and pharmacy as effective tools for bacterial product characterization.

Evaluation of the impact of buffered peptone water composition on the discrimination between Salmonella enterica and Escherichia coli by Raman spectroscopy

The detection of Salmonella spp. in food samples is regulated by the ISO 6579:2002 standard, which requires that precise procedures are followed to ensure the reliability of the detection process. This standard requires buffered peptone water as a rich medium for the enrichment of bacteria. However, the effects of different brands of buffered peptone water on the identification of microorganisms by Raman spectroscopy are unknown. In this regard, our study evaluated the discrimination between two bacterial species, Salmonella enterica and Escherichia coli, inoculated and analyzed with six of the most commonly used buffered peptone water brands. The results showed that bacterial cells behaved differently according to the brand used in terms of biomass production and the spectral fingerprint. The identification accuracy of the analyzed strains was between 85% and 100% depending on the given brand. Several batches of two brands were studied to evaluate the classification rates between the analyzed bacterial species. The chemical analysis performed on these brands showed that the nutrient content was slightly different and probably explained the observed effects. On the basis of these results, Raman spectroscopy operators are encouraged to select an adequate culture medium and continue its use throughout the identification process to guarantee optimal recognition of the microorganism of interest.

Rapid detection of bacterial infection and viability assessment with high specificity and sensitivity using Raman microspectroscopy

Infectious diseases caused by bacteria still pose major diagnostic challenges in spite of the availability of various molecular approaches. Irrespective of the type of infection, rapid identification of the causative pathogen with a high degree of sensitivity and specificity is essential for initiating appropriate treatment. While existing methods like PCR possess high sensitivity, they are incapable of identifying the viability status of the pathogen and those which can, like culturing, are inherently slow. To overcome these limitations, we developed a diagnostic platform based on Raman microspectroscopy, capable of detecting biochemical signatures from a single bacterium for identification as well as viability assessment. The study also establishes a decontamination protocol for handling live pathogenic bacteria which does not affect identification and viability testing, showing applicability in the analysis of sputum samples containing pathogenic mycobacterial strains. The minimal sample processing along with multivariate analysis of spectroscopic signatures provides an interface for automatic classification, allowing the prediction of unknown samples by mapping signatures onto available datasets. Also, the novelty of the current work is the demonstration of simultaneous identification and viability assessment at a single bacterial level for pathogenic bacteria. Graphical abstract.

Detection of Antimicrobial Resistance-Related Changes in Biochemical Composition of Staphylococcus aureus by Means of Atomic Force Microscopy-Infrared Spectroscopy

The development of antimicrobial resistance (AMR) resulting from widespread antibiotic usage is occurring at an alarming pace, much faster than our understanding of the mechanisms behind resistance. Knowledge about resistance-related phenotypic and genotypic changes is critical for the development of new drugs. Here, we identify changes in the chemical composition of Staphylococcus aureus associated with the development of resistance to last resort drugs, vancomycin and daptomycin, using a novel, single cell, nanoscale technique, atomic force microscopy-infrared spectroscopy (AFM-IR), combined with chemometric analysis. We utilized paired clinical isolates, with the parent (susceptible) strain isolated prior to treatment and the daughter (resistant) strain obtained from the same patient after drug admission and clinical failure. We observed an increase in the amount of nonintracellular carbohydrates, indicating thickening or changes in the packing of the cell wall, as well as changes in the phospholipid content in relation to vancomycin resistance and daptomycin nonsusceptibility, respectively.

Food Microstructure and Fat Content Affect Growth Morphology, Growth Kinetics, and Preferred Phase for Cell Growth of Listeria monocytogenes in Fish-Based Model Systems

Food microstructure significantly affects microbial growth dynamics, but knowledge concerning the exact influencing mechanisms at a microscopic scale is limited. The food microstructural influence on Listeria monocytogenes (green fluorescent protein strain) growth at 10°C in fish-based food model systems was investigated by confocal laser scanning microscopy. The model systems had different microstructures, i.e., liquid, xanthan (high-viscosity liquid), aqueous gel, and emulsion and gelled emulsion systems varying in fat content. Bacteria grew as single cells, small aggregates, and microcolonies of different sizes (based on colony radii [size I, 1.5 to 5.0 μm; size II, 5.0 to 10.0 μm; size III, 10.0 to 15.0 μm; and size IV, ≥15 μm]). In the liquid, small aggregates and size I microcolonies were predominantly present, while size II and III microcolonies were predominant in the xanthan and aqueous gel. Cells in the emulsions and gelled emulsions grew in the aqueous phase and on the fat-water interface. A microbial adhesion to solvent assay demonstrated limited bacterial nonpolar solvent affinities, implying that this behavior was probably not caused by cell surface hydrophobicity. In systems containing 1 and 5% fat, the largest cell volume was mainly represented by size I and II microcolonies, while at 10 and 20% fat a few size IV microcolonies comprised nearly the total cell volume. Microscopic results (concerning, e.g., growth morphology, microcolony size, intercolony distances, and the preferred phase for growth) were related to previously obtained macroscopic growth dynamics in the model systems for an L. monocytogenes strain cocktail, leading to more substantiated explanations for the influence of food microstructural aspects on lag phase duration and growth rate.IMPORTANCEListeria monocytogenes is one of the most hazardous foodborne pathogens due to the high fatality rate of the disease (i.e., listeriosis). In this study, the growth behavior of L. monocytogenes was investigated at a microscopic scale in food model systems that mimic processed fish products (e.g., fish paté and fish soup), and the results were related to macroscopic growth parameters. Many studies have previously focused on the food microstructural influence on microbial growth. The novelty of this work lies in (i) the microscopic investigation of products with a complex composition and/or structure using confocal laser scanning microscopy and (ii) the direct link to the macroscopic level. Growth behavior (i.e., concerning bacterial growth morphology and preferred phase for growth) was more complex than assumed in common macroscopic studies. Consequently, the effectiveness of industrial antimicrobial food preservation technologies (e.g., thermal processing) might be overestimated for certain products, which may have critical food safety implications.

Standardization of complex biologically derived spectrochemical datasets

Spectroscopic techniques such as Fourier-transform infrared (FTIR) spectroscopy are used to study interactions of light with biological materials. This interaction forms the basis of many analytical assays used in disease screening/diagnosis, microbiological studies, and forensic/environmental investigations. Advantages of spectrochemical analysis are its low cost, minimal sample preparation, non-destructive nature and substantially accurate results. However, an urgent need exists for repetition and validation of these methods in large-scale studies and across different research groups, which would bring the method closer to clinical and/or industrial implementation. For this to succeed, it is important to understand and reduce the effect of random spectral alterations caused by inter-individual, inter-instrument and/or inter-laboratory variations, such as variations in air humidity and CO₂ levels, and aging of instrument parts. Thus, it is evident that spectral standardization is critical to the widespread adoption of these spectrochemical technologies. By using calibration transfer procedures, in which the spectral response of a secondary instrument is standardized to resemble the spectral response of a primary instrument, different sources of variation can be normalized into a single model using computational-based methods, such as direct standardization (DS) and piecewise direct standardization (PDS); therefore, measurements performed under different conditions can generate the same result, eliminating the need for a full recalibration. Here, we have constructed a protocol for model standardization using different transfer technologies described for FTIR spectrochemical applications. This is a critical step toward the construction of a practical spectrochemical analysis model for daily routine analysis, where uncertain and random variations are present.

Rapid, accurate, and comparative differentiation of clinically and industrially relevant microorganisms via multiple vibrational spectroscopic fingerprinting

Despite the fact that various microorganisms (e.g., bacteria, fungi, viruses, etc.) have been linked with infectious diseases, their crucial role towards sustaining life on Earth is undeniable. The huge biodiversity, combined with the wide range of biochemical capabilities of these organisms, have always been the driving force behind their large number of current, and, as of yet, undiscovered future applications. The presence of such diversity could be said to expedite the need for the development of rapid, accurate and sensitive techniques which allow for the detection, differentiation, identification and classification of such organisms. In this study, we employed Fourier transform infrared (FT-IR), Raman, and surface enhanced Raman scattering (SERS) spectroscopies, as molecular whole-organism fingerprinting techniques, combined with multivariate statistical analysis approaches for the classification of a range of industrial, environmental or clinically relevant bacteria (P. aeruginosa, P. putida, E. coli, E. faecium, S. lividans, B. subtilis, B. cereus) and yeast (S. cerevisiae). Principal components-discriminant function analysis (PC-DFA) scores plots of the spectral data collected from all three techniques allowed for the clear differentiation of all the samples down to sub-species level. The partial least squares-discriminant analysis (PLS-DA) models generated using the SERS spectral data displayed lower accuracy (74.9%) when compared to those obtained from conventional Raman (97.8%) and FT-IR (96.2%) analyses. In addition, whilst background fluorescence was detected in Raman spectra for S. cerevisiae, this fluorescence was quenched when applying SERS to the same species, and conversely SERS appeared to introduce strong fluorescence when analysing P. putida. It is also worth noting that FT-IR analysis provided spectral data of high quality and reproducibility for the whole sample set, suggesting its applicability to a wider range of samples, and perhaps the most suitable for the analysis of mixed cultures in future studies. Furthermore, our results suggest that while each of these spectroscopic approaches may favour different organisms (sample types), when combined, they would provide complementary and more in-depth knowledge (structural and/or metabolic state) of biological systems. To the best of our knowledge, this is the first time that such a comparative and combined spectroscopic study (using FT-IR, Raman and SERS) has been carried out on microbial samples.

Raman and Surface-Enhanced Raman Scattering for Biofilm Characterization

Biofilms are a communal way of living for microorganisms in which microorganism cells are surrounded by extracellular polymeric substances (EPS). Most microorganisms can live in biofilm form. Since microorganisms are everywhere, understanding biofilm structure and composition is crucial for making the world a better place to live, not only for humans but also for other living creatures. Raman spectroscopy is a nondestructive technique and provides fingerprint information about an analyte of interest. Surface-enhanced Raman spectroscopy is a form of this technique and provides enhanced scattering of the analyte that is in close vicinity of a nanostructured noble metal surface such as silver or gold. In this review, the applications of both techniques and their combination with other biofilm analysis techniques for characterization of composition and structure of biofilms are discussed.

Comparative responses of diazotrophic abundance and community structure to the chemical composition of paddy soil

Diazotrophy is considered as one of the most crucial and dynamic phenomena in the rice field and also a major source of nitrogen input. The objective of this study was to elucidate possible interactions between diverse and dominant diazotrophic bacterial community and organic carbon composition of the paddy soil. Our results suggest that most abundantly found diazotrophs belong to a proteobacteria group and uncultured bacterial forms. A gene abundance study clearly showed significantly higher diazotrophic abundance (P < 0.01) at Chandauli (CHN) as compared to Varanasi (VNS) and Ghazipur (GHJ) districts of Eastern Uttar Pradesh, India, with nitrogenase reductase (nifH) copy number between 1.44 × 10³ and 3.34 × 10³ copy g^-1 soil. Fourier-transform infrared (FT-IR) spectroscopy data identified -CO-, C=O ([Formula: see text] and -NH-), [Formula: see text], and OH- as dominant organic functional groups in the paddy soil. Multivariate analysis was performed to get a clear and more accurate picture of interactions between free-living diazotrophs and abiotic soil factors. Regression analysis suggested a similar trend of distribution of different functional groups along each site. Relative abundance and diversity of diazotrophic population increased in response to FT-IR-based soil organic fractions. Maximum number of FT-IR spectral peak at sites in the Chandauli district augmented its bacterial diazotrophic diversity and abundance. Taken together, the present study sheds light on the substrate-driven composition of the microbial population of selected paddy areas.

Rapid identification of staphylococci by Raman spectroscopy

Clinical treatment of the infections caused by various staphylococcal species differ depending on the actual cause of infection. Therefore, it is necessary to develop a fast and reliable method for identification of staphylococci. Raman spectroscopy is an optical method used in multiple scientific fields. Recent studies showed that the method has a potential for use in microbiological research, too. Our work here shows a possibility to identify staphylococci by Raman spectroscopy. We present a method that enables almost 100% successful identification of 16 of the clinically most important staphylococcal species directly from bacterial colonies grown on a Mueller-Hinton agar plate. We obtained characteristic Raman spectra of 277 staphylococcal strains belonging to 16 species from a 24-hour culture of each strain grown on the Mueller-Hinton agar plate using the Raman instrument. The results show that it is possible to distinguish among the tested species using Raman spectroscopy and therefore it has a great potential for use in routine clinical diagnostics.

Effect of Principal Component Analysis Centering and Scaling on Classification of Mycobacteria from Raman Spectra

Raman spectroscopy has been used for decades to detect and identify biological substances as it provides specific molecular information. Spectra collected from biological samples are often complex, requiring the aid of data truncation techniques such as principal component analysis (PCA) and multivariate classification methods. Classification results depend on the proper selection of principal components (PCs) and how PCA is performed (scaling and/or centering). There are also guidelines for choosing the optimal number of PCs such as a scree plot, Kaiser criterion, or cumulative percent variance. The goal of this research is to evaluate these methods for best implementation of PCA and PC selection to classify Raman spectra of bacteria. Raman spectra of three different isolates of mycobacteria ( Mycobacterium sp. JLS, Mycobacterium sp. KMS, Mycobacterium sp. MCS) were collected and then passed through PCA and linear discriminant analysis for classification. Principal component analysis implementation as well as PC selection was evaluated by comparing the highest possible classification accuracies against accuracies determined by PC selection methods for each centering and scaling option. Centered and unscaled data provided the best results when selecting PCs based on cumulative percent variance.

Differentiating Pseudomonas sp. strain ADP cells in suspensions and biofilms using Raman spectroscopy and scanning electron microscopy

High quality spectra of Pseudomonas sp. strain ADP in the planktonic and biofilm state were obtained using Raman microspectroscopy. These spectra enabled the identification of key differences between free and biofilm cells in the fingerprint region of Raman spectra in the nucleic acid, carbohydrate, and protein regions. Scanning electron microscopy (SEM) enabled detailed visualization of ADP biofilm with confirmation of associated extracellular matrix structure. Following extraction and Raman analysis of extracellular polymeric substances, Raman spectral differences between free and biofilm cells were largely attributed to the contribution of extracellular matrix components produced in mature biofilms. Raman spectroscopy complemented with SEM proves to be useful in distinguishing physiological properties among cells of the same species. Graphical Abstract Raman spectroscopy complemented with SEM proves to be useful in distinguishing physiological properties among cells of the same species.

Quantitative Raman Spectroscopy Analysis of Polyhydroxyalkanoates Produced by Cupriavidus necator H16

We report herein on the application of Raman spectroscopy to the rapid quantitative analysis of polyhydroxyalkanoates (PHAs), biodegradable polyesters accumulated by various bacteria. This theme was exemplified for quantitative detection of the most common member of PHAs, poly(3-hydroxybutyrate) (PHB) in Cupriavidus necator H16. We have identified the relevant spectral region (800–1800 cm⁻¹) incorporating the Raman emission lines exploited for the calibration of PHB (PHB line at 1736 cm⁻¹) and for the selection of the two internal standards (DNA at 786 cm⁻¹ and Amide I at 1662 cm⁻¹). In order to obtain quantitative data for calibration of intracellular content of PHB in bacterial cells reference samples containing PHB amounts—determined by gas chromatography—from 12% to 90% (w/w) were used. Consequently, analytical results based on this calibration can be used for fast and reliable determination of intracellular PHB content during biotechnological production of PHB since the whole procedure—from bacteria sampling, centrifugation, and sample preparation to Raman analysis—can take about 12 min. In contrast, gas chromatography analysis takes approximately 8 h.

Morphological and chemical changes of aerosolized E. coli treated with a dielectric barrier discharge

This study presents the morphological and chemical modification of the cell structure of aerosolized Escherichia coli treated with a dielectric barrier discharge (DBD). Exposure to DBD results in severe oxidation of the bacteria, leading to the formation of hydroxyl groups and carbonyl groups and a significant reduction in amine functionalities and phosphate groups. Near edge x-ray absorption fine structure (NEXAFS) measurements confirm the presence of additional oxide bonds upon DBD treatment, suggesting oxidation of the outer layer of the cell wall. Electron microscopy images show that the bacteria undergo physical distortion to varying degrees, resulting in deformation of the bacterial structure. The electromagnetic field around the DBD coil causes severe damage to the cell structure, possibly resulting in leakage of vital cellular materials. The oxidation and chemical modification of the bacterial components are evident from the Fourier transform infrared spectroscopy and NEXAFS results. The bacterial reculture experiments confirm inactivation of airborne E. coli upon treating with DBD.

Bacterial Colonies in Solid Media and Foods: A Review on Their Growth and Interactions with the Micro-Environment

Bacteria, either indigenous or added, are immobilized in solid foods where they grow as colonies. Since the 80's, relatively few research groups have explored the implications of bacteria growing as colonies and mostly focused on pathogens in large colonies on agar/gelatine media. It is only recently that high resolution imaging techniques and biophysical characterization techniques increased the understanding of the growth of bacterial colonies, for different sizes of colonies, at the microscopic level and even down to the molecular level. This review covers the studies on bacterial colony growth in agar or gelatine media mimicking the food environment and in model cheese. The following conclusions have been brought to light. Firstly, under unfavorable conditions, mimicking food conditions, the immobilization of bacteria always constrains their growth in comparison with planktonic growth and increases the sensibility of bacteria to environmental stresses. Secondly, the spatial distribution describes both the distance between colonies and the size of the colonies as a function of the initial level of population. By studying the literature, we concluded that there systematically exists a threshold that distinguishes micro-colonies (radius < 100-200 μm) from macro-colonies (radius >200 μm). Micro-colonies growth resembles planktonic growth and no pH microgradients could be observed. Macro-colonies growth is slower than planktonic growth and pH microgradients could be observed in and around them due to diffusion limitations which occur around, but also inside the macro-colonies. Diffusion limitations of milk proteins have been demonstrated in a model cheese around and in the bacterial colonies. In conclusion, the impact of immobilization is predominant for macro-colonies in comparison with micro-colonies. However, the interaction between the colonies and the food matrix itself remains to be further investigated at the microscopic scale.

Influence of Culture Media on Microbial Fingerprints Using Raman Spectroscopy

Raman spectroscopy has a broad range of applications across numerous scientific fields, including microbiology. Our work here monitors the influence of culture media on the Raman spectra of clinically important microorganisms (Escherichia coli, Staphylococcus aureus, Staphylococcus epidermidis and Candida albicans). Choosing an adequate medium may enhance the reproducibility of the method as well as simplifying the data processing and the evaluation. We tested four different media per organism depending on the nutritional requirements and clinical usage directly on a Petri dish. Some of the media have a significant influence on the microbial fingerprint (Roosvelt-Park Institute Medium, CHROMagar) and should not be used for the acquisition of Raman spectra. It was found that the most suitable medium for microbiological experiments regarding these organisms was Mueller-Hinton agar.

β-Glucan as an encapsulating agent: Effect on probiotic survival in simulated gastrointestinal tract

Three strains of probiotics Lactobacillus casei, Lactobacillus brevis, and Lactobacillus plantarum were encapsulated in β-glucan matrix using emulsion technique. Further the encapsulated cells were studied for their tolerance in simulated gastrointestinal conditions and its storage stability. The average encapsulation efficiency of β-glucan-probiotic beads was found to be 74.01%. The surface morphology of β-glucan containing bacteria was studied using SEM. The noteworthy absorptions in the FT-IR spectra between 1300-900 cm(-1) and 2918-2925 cm(-1) corresponds to the presence of bacteria into the glucan matrix. Also, the thermal stability of β-glucan was evaluated using Differential Scanning Calorimeter. The efficiency of β-glucan in protecting the surviability of probiotic cells under simulated gastrointestinal conditions was studied. Results revealed significant (p<0.05) improvement to tolerance when the encapsulated cells were subjected to stresses like low pH, heat treatment, simulated intestinal conditions and storage.

Potential of Raman Spectroscopy To Monitor Arsenic Toxicity on Bacteria: Insights toward Multiparametric Bioassays

In the field of toxicological bioassays, the latest progress in Raman spectroscopy opens new research perspectives on a fast method of observing metabolic responses against toxic agents. This technique offers a multiparametric approach, providing an overview of the physiological changes that are caused by pollutants. However, physiological spectral fingerprints require complex chemometric methods for proper analysis. In this study, particular attention has been given to the elaboration of an "aberrant spectra" detection strategy to highlight the effects of arsenic on the bacteria Escherichia coli. This strategy significantly improved spectra classification, consistent with a dose-response effect of the four tested concentrations of the metal. Indeed, the correct classification score of the spectra increased from 88 to more than 99%. The exposure time effect has also been investigated. The fine analysis of Raman spectroscopy fingerprints enabled the design of different "spectral signatures", highlighting early and late effects of arsenic on bacteria. The observed variations are in agreement with the expected toxicity and encourage the use of Raman spectroscopy for toxic element detection.

Understanding the cryotolerance of lactic acid bacteria using combined synchrotron infrared and fluorescence microscopies

Freezing is widely used for preserving different types of cells. Frozen concentrates of lactic acid bacteria (LAB) are extensively used for manufacturing food, probiotic products and for green chemistry and medical applications. However, the freezing and thawing processes cause cell injuries that result in significant cell death. Producing homogeneous bacterial populations with high cryotolerance remains a real challenge. Our objective was to investigate the biochemical and physiological changes in a LAB model at the cell scale following fermentation and freezing in order to identify cellular biomarkers of cryotolerance. Infrared spectra of individual bacteria produced by applying different fermentation and freezing conditions were acquired using synchrotron radiation-based Fourier-transform infrared (SR-FTIR) microspectroscopy to achieve sub-cellular spatial resolution. Fluorescent microscopy was concomitantly assessed, thus making possible to simultaneously analyse the biochemistry and physiological state of a single cell for the first time. Principal component analysis was used to evaluate changes in cell composition, with particular focus on lipids, proteins and polysaccharides. SR-FTIR results indicated that before freezing, freeze-resistant cells grown in a rich medium presented a high content of CH3 groups from lipid chains, of cell proteins in an α-helix secondary structure and of charged polymers such as teichoic and lipoteichoic acids that constitute the Gram-positive bacterial wall. Moreover, SR-FTIR microspectroscopy made it possible to reveal cell heterogeneity within the cluster of resistant cells, which was ascribed to the diversity of potential substrates in the growth medium. Freezing and thawing processes induced losses of membrane integrity and cell viability in more than 90% of the freeze-sensitive bacterial population. These damages leading to cell death were ascribed to biochemical modification of cell membrane phospholipids, in particular a rigidification of the cytoplasmic membrane following freezing. Furthermore the freeze-resistant cells remained viable after freezing and thawing but a modification of protein secondary structure was detected by SR-FTIR analysis. These results highlighted the potential application of bimodal analysis by SR-FTIR and fluorescence microscopy to increase our knowledge about mechanisms related to cell damage.

Phenotypic Characterisation of Shewanella oneidensis MR-1 Exposed to X-Radiation

Biogeochemical processes mediated by Fe(III)-reducing bacteria such as Shewanella oneidensis have the potential to influence the post-closure evolution of a geological disposal facility for radioactive wastes and to affect the solubility of some radionuclides. Furthermore, their potential to reduce both Fe(III) and radionuclides can be harnessed for the bioremediation of radionuclide-contaminated land. As some such sites are likely to have significant radiation fluxes, there is a need to characterise the impact of radiation stress on such microorganisms. There have, however, been few global cell analyses on the impact of ionizing radiation on subsurface bacteria, so here we address the metabolic response of S. oneidensis MR-1 to acute doses of X-radiation. UV/Vis spectroscopy and CFU counts showed that although X-radiation decreased initial viability and extended the lag phase of batch cultures, final biomass yields remained unchanged. FT-IR spectroscopy of whole cells indicated an increase in lipid associated vibrations and decreases in vibrations tentatively assigned to nucleic acids, phosphate, saccharides and amines. MALDI-TOF-MS detected an increase in total protein expression in cultures exposed to 12 Gy. At 95 Gy, a decrease in total protein levels was generally observed, although an increase in a putative cold shock protein was observed, which may be related to the radiation stress response of this organism. Multivariate statistical analyses applied to these FT-IR and MALDI-TOF-MS spectral data suggested that an irradiated phenotype developed throughout subsequent generations. This study suggests that significant alteration to the metabolism of S. oneidensis MR-1 is incurred as a result of X-irradiation and that dose dependent changes to specific biomolecules characterise this response. Irradiated S. oneidensis also displayed enhanced levels of poorly crystalline Fe(III) oxide reduction, though the mechanism underpinning this phenomenon is unclear.

Candida parapsilosis biofilm identification by Raman spectroscopy

Colonies of Candida parapsilosis on culture plates were probed directly in situ using Raman spectroscopy for rapid identification of specific strains separated by a given time intervals (up to months apart). To classify the Raman spectra, data analysis was performed using the approach of principal component analysis (PCA). The analysis of the data sets generated during the scans of individual colonies reveals that despite the inhomogeneity of the biological samples unambiguous associations to individual strains (two biofilm-positive and two biofilm-negative) could be made.

Combination of synchrotron radiation-based Fourier transforms infrared microspectroscopy and confocal laser scanning microscopy to understand spatial heterogeneity in aquatic multispecies biofilms

Understanding the spatial heterogeneity within environmental biofilms can provide an insight into compartmentalization of different functions in biofilm communities. We used a non-destructive and label-free method by combining Synchrotron Radiation-based Fourier Transform Infrared Microspectroscopy (SR-FTIR) with Confocal Laser Scanning Microscopy (CLSM) to distinguish the spatial chemical changes within multispecies biofilms grown from natural storm waters in flow cells. Among the different surfaces tested for biofilm growth and optimal imaging, mylar membranes were most suited and it enabled successful spatial infrared imaging of natural biofilms for obtaining reliable and interpretable FTIR spectra. Time series analysis of biofilm growth showed that influx of water during biofilm growth, results in significant changes in biofilm formation. Early biofilms showed active nutrient acquisition and desiccation tolerance mechanisms corresponding with accumulation of secreted proteins. Statistical approach used for the evaluation of chemical spectra allowed for clustering and classification of various regions of the biofilm. Microheterogeneity was observed in the polymeric components of the biofilm matrix, including cellulose, glycocalyx and dextran-like molecules. Fructan and glycan-rich regions were distinguishable and glycocalyx was abundant in the strongly adhering peripheral regions of biofilms. Inner core showed coexistence of oxygen dimers and ferrihydrite that will likely support growth of Fe (II)-oxidising bacteria. The combined SR-FTIR microspectroscopy and CSLM approach for complex natural biofilms described here will be useful both in understanding heterogeneity of matrix components and in correlating functions of juxtaposed microbial species in complex natural biofilms with physicochemical microenvironment to which they are exposed.

Optical Fiber-Based Steady State and Fluorescence Lifetime Spectroscopy for Rapid Identification and Classification of Bacterial Pathogens Directly from Colonies on Agar Plates

Fluorescence spectroscopy was examined as a potential technique for identification and classification of bacterial pathogens. Colonies of Staphylococcus aureus, Pseudomonas aeruginosa, Salmonella typhi, and Klebsiella pneumoniae on agar plates were measured directly using a laboratory spectrofluorimeter coupled with optical fiber. Steady state fluorescence spectra were collected following excitation at 280 nm (tryptophan) and 380 nm (NADH). Results showed that fluorescence lifetime decays of tryptophan at 280 nm excitation from the four organisms were best described with triexponential fit and it reveals the existence of different protein conformation. The emission spectroscopy of the four bacteria at 380 nm excitation (NADH) provided better classification (100% of original grouped cases correctly classified and 98.1% of cross-validated grouped cases correctly classified) than that of 280 nm excitation (tryptophan). Our results demonstrated that optical fiber-based fluorescence identification and classification of bacteria is rapid, easy to perform, and of low cost compared to standard methods.