Fractionation and physicochemical characterization of dietary fiber of kenaf (Hibiscus cannabinus L.) seed

BACKGROUND

Kenaf seeds are underutilized kenaf plant by-products, containing essential nutrients including dietary fiber (DF), which can be potentially utilized as food ingredients. The present study aimed to evaluate the physicochemical characteristics of kenaf seed fiber fractions extracted from kenaf seed.

RESULTS

Defatted kenaf seed powder yielded four DF fractions: alkali-soluble hemicellulose (146.4 g kg-1 ), calcium-bound pectin (10.3 g kg-1 ) and acid-soluble pectin (25.4 g kg-1 ) made up the soluble fibre fraction, whereas cellulose (202.2 g kg-1 ) comprised the insoluble fraction. All fractions were evaluated for their physicochemical properties. The DF fractions contained glucose, mannose, xylose and arabinose, and a small amount of uronic acid (1.2-2.7 g kg-1 ). The isolated pectin fractions had a low degree of esterification (14-30%). All the isolated DF fractions had high average molecular weights ranging from 0.3 to 4.3 × 106 g mol-1 . X-ray diffractogram analysis revealed that the fractions consisted mainly of an amorphous structure with a relative crystallinity ranging from 31.6% to 44.1%. The Fourier-transform infrared spectroscopy spectrum of kenaf seed and its DF fractions showed typical absorption of polysaccharides, with the presence of hydroxyl, carboxyl, acetyl and methyl groups. Scanning electron microscopy analysis demonstrated that the raw material with the rigid structure resulted in soluble and insoluble DF fractions with more fragile and fibrous appearances, respectively. The soluble DF demonstrated greater flowability and compressibility than the insoluble fractions.

CONCLUSION

These findings provide novel information on the DF fractions of kenaf seeds, which could be used as a potential new DF for the food industry. © 2023 Society of Chemical Industry.

Side chain of confined xylan affects cellulose integrity leading to bending stem with reduced mechanical strength in ornamental plants

The stem support for fresh-cut flowers exerts a profound influence on the display of their blossoms. During vase insertion, bending stems significantly affect the ornamental value, but much remains unclear about the underlying reasons. In this study, six pairs of ornamental plants were screened for the contrast of bending and straight stems. The bending stems have weakened mechanical force and biomass recalcitrance compared with the straight ones. Meanwhile, cells in the bending stems became more loosely packed, along with a decrease in cell wall thickness and cellulose levels. Furthermore, wall properties characterizations show bending stems have decreased lignocellulosic CrI and cellulose DP, and enhanced the branching ratio of hemicellulose which is trapped in the cellulose. Given the distinct cell wall factors in different species, all data are grouped in standardized to eliminate the variations among plant species. The principal composition analysis and correlation analysis of the processed dataset strongly suggest that cellulose association factors determine the stem mechanical force and recalcitrance. Based on our results, we propose a model for how branches of confined hemicellulose interacted with cellulose to modulate stem strength support for the straight or bending phenotype in cut flowers.

Charting the solid-state NMR signals of polysaccharides: A database-driven roadmap

Solid-state nuclear magnetic resonance (ssNMR) measurements of intact cell walls and cellular samples often generate spectra that are difficult to interpret due to the presence of many coexisting glycans and the structural polymorphism observed in native conditions. To overcome this analytical challenge, we present a statistical approach for analyzing carbohydrate signals using high-resolution ssNMR data indexed in a carbohydrate database. We generate simulated spectra to demonstrate the chemical shift dispersion and compare this with experimental data to facilitate the identification of important fungal and plant polysaccharides, such as chitin and glucans in fungi and cellulose, hemicellulose, and pectic polymers in plants. We also demonstrate that chemically distinct carbohydrates from different organisms may produce almost identical signals, highlighting the need for high-resolution spectra and validation of resonance assignments. Our study provides a means to differentiate the characteristic signals of major carbohydrates and allows us to summarize currently undetected polysaccharides in plants and fungi, which may inspire future investigations.

Preparation of cellulose-based flexible SERS and its application for rapid and ultra-sensitive detection of thiram on fruits and vegetables

In response to the prevalent issue of thiram as a common pesticide residue on the surface of fruits and vegetables, our research team employed an acidic hydrated metal salt low co-fusion solvent to dissolve cellulose lysis slurry. Subsequently, a regenerated cellulose membrane (RCM) was successfully prepared via sol-gel method. Uniformly sized Ag nanoparticles (NPs) were deposited on RCM utilizing the continuous ion layer adsorption and reaction (SILAR) technique. The resulting Ag NPs/RCM flexible surface-enhanced Raman spectroscopy (SERS) substrates exhibited a minimum detection limit of 5 × 10-9 M for Rhodamine 6G (R6G), demonstrating good uniformity (RSD = 4.86 %) and reproducibility (RSD = 3.07 %). Moreover, the substrate displayed a remarkable sensitivity of 10-10 M toward thiram standard solution. Given its inherent flexibility, the substrate proves advantageous for the detection of three-dimensional environments such as fruit and vegetable surfaces, and its practicality has been confirmed in the detection of thiram residue on apples, tomatoes, pears, and other fruits and vegetables.

Cellulose fibers and ellagitannin-rich extractives from rambutan (Nephelium Lappaceum L.) peel by an eco-friendly approach

This study assesses the viability of an accelerated solvent extraction technique employing environmentally friendly solvents to extract ellagitannins while producing cellulose-rich fibers from rambutan peel. Two sequential extraction protocols were investigated: 1) water followed by acetone/water (4:1, v:v), and 2) acetone followed by acetone/water (4:1, v:v), both performed at 50 °C. The first protocol had a higher extraction yield of 51 %, and the obtained extractives featured a higher total phenolic (531.4 ± 22.0 mg-GAE/g) and flavonoid (487.3 ± 16.9 mg-QE/g) than the second protocol (495.4 ± 32.8 mg-GAE/g and 310.6 ± 31.4 mg-QE/g, respectively). The remaining extractive-free fibers were processed by bleaching using either 2 wt% sodium hydroxide with 3 wt% hydrogen peroxide or 4-5 wt% peracetic acid. Considering bleaching efficiency, yield, and process sustainability, the single bleaching treatment with 5 wt% of peracetic acid was selected as the most promising approach to yield cellulose-rich fibers. The samples were analyzed by methanolysis to determine the amount and type of poly- and oligosaccharides and studied by 13C solid-state nuclear magnetic resonance spectroscopy and thermal gravimetric analysis. The products obtained from the peels demonstrate significant potential for use in various sectors, including food, nutraceuticals, cosmetics, and paper production.

Exploring the mechanism of Lycium barbarum fruit cell wall polysaccharide remodeling reveals potential pectin accumulation contributors

The level of polysaccharides in the mature Lycium barbarum fruit (LBF) cell wall depends on their metabolism, trafficking, and reassembly within the cell. In this study, we examined the composition, content, and ultrastructure of the cell wall polysaccharides of LBF during maturation, and further analyzed cell wall polysaccharide remodeling using isotope tagging with relative and absolute quantification (iTRAQ)-based proteomics. The results showed that the contents of cellulose and hemicellulose tended to increase in the pre-maturation stage and decrease in the later stage, while pectin level increased before fruit maturing. The differential expression of the 54 proteins involved in the metabolic pathways for glucose, fructose, galactose, galacturonic acid and arabinose was found to be responsible for these alterations. The work provides a biological framework for the reorganization of polysaccharides in the LBF cell wall, and supports the hypothesis that pectic polysaccharide glycosyl donors come from starch, cellulose, hemicellulose and isomorphic pectin.

Xylan-cellulose core structure of oat water-extractable β-glucan macromolecule: Insight into interactions and organization of the cell wall complex

Water-extractable β-glucan with high molar mass (HM) determines health benefits of oat food. Oat β-glucan was extracted by a standardized in vitro digestion method and co-existing water-extractable polysaccharide (WEP) fraction and its HM-arabinoxylan (HM-AX) subfraction were isolated to identify their highly acid-resistant subunit and investigate molecular interactions between constituent polymers. The WEP and HM-AX samples consisted of arabinoxylans (AXs) (74 and 76 %, respectively), however, cellulose constituted the secondary component (6.6 and 12.8 %, respectively). Multi-detection HPSEC along with specific enzymatic hydrolysis of AXs revealed the presence of the HM-xylan domain (16 and 34 %, respectively) built of numerous single- and multi-component populations with random coil and rod-like conformations, which were embedded in a xylan matrix with spherical conformation and controlled the macromolecular shape. Unlike single-component populations, the multi-component ones were resistant to hydrolytic action of AX-hydrolyzing enzymes and represented the subunits that anchor matrix polysaccharides onto cellulose surface. These results indicate that water-extractable β-glucan macromolecule comprises as integral element a cellulose core with two linking populations, HM-xylan and low molar mass glucomannan, which are surrounded by a feruloylated AX-arabinan-arabinogalactan composite and next laminated by β-glucan matrix. The stiff cellulose-xylan backbone is the basis of HM β-glucan organization, controlled by its cellulose-like segments.

Exploring the potential of bacterial cellulose paste as a fat replacer for low-fat plant-based hamburger patties

Plant-based hamburger patties (PHPs) with reduced fat content made using fat replacers will meet the consumption goals of individuals who consume meat alternative products for health. In this study, we developed a dual-alternative food model by analysing the applicability of bacterial cellulose paste (BCP) as a fat replacer and supplementing it in PHPs. BCPs were prepared with solid contents of (w/w; 1.0%, 1.5%, 2.0%, 2.5%, and 3.0%) and compared and analyzed with three types of conventional vegetable [coconut oil, margarine, and shortening (SH)] and animal fats (beef tallow, butter, and lard) for various characteristics (appearance, dimensional stability, hardness level, and rheological properties). According to the results, BCP with a solid content of 3.0% (w/w) had the most similar characteristics to SH. Therefore, using SH as a control fat, PHPs in which 0%, 25%, 50%, 75%, and 100% (w/w) SH were replaced by 3.0% (w/w) BCP were prepared. Analysis of the appearance, instrumental color, diameter reduction, thickness, cooking loss, and texture profile of the PHPs, confirmed that replacement of 25%-50% (w/w) SH with 3.0% (w/w) BCP in the preparation of PHP resulted in i) redder color, ii) better dimensional stability, iii) lower cooking loss, and iv) higher chewiness of the final products. The results of the sensory evaluation showed that the PHPs, with 25%-50% (w/w) SH replaced with 3.0% (w/w) BCP, exhibited no significant differences (p < 0.05) in overall preference scores compared to the full-SH sample. In conclusion, this study demonstrated the potential of BCP as a fat substitute for the production of PHPs.

Determination of thiram in fruit juices using a bacterial cellulose nanocrystal-based SERS substrate

Pesticide residues in agri-foods have risk to human health and one solution is to develop simple and accurate methods for rapid detection. We developed a SERS sensor composed of gold nanoparticles (AuNPs) and bacterial cellulose nanocrystal (BCNC) to detect thiram in fruit juice. BCNC-SO3H was used as a stabilizer to support AuNPs via electrostatic repulsion, fabricating a BCNC-AuNPs SERS substrate with uniformly distributed AuNPs. This BCNC-AuNPs SERS substrate was applied to determine thiram residues in peach juice, apple juice, and grape juice with the limits of detection of 0.036 ppm, 0.044 ppm, and 0.044 ppm, respectively. The whole test took 12 min including sample preparation and analysis. The detection limits meet the maximum residue levels of thiram in fruit juices required by China, Europe and North America, indicating that this BCNC-based substrate could serve as a satisfactory SERS sensor for pesticide residue monitoring in the food supply chain.

Bioconversion of underutilized brewing by-products into bacterial cellulose by a newly isolated Komagataeibacter rhaeticus strain: A preliminary evaluation of the bioprocess environmental impact

A novel Komagataeibacter rhaeticus UNIWA AAK2 strain was used to produce bacterial cellulose (BC), valorizing brewers' spent grain (BSG) and brewer's spent yeast (BSY). Under optimal conditions (controlled pH = 6 and 30 g/L sugars), a maximum BC of 4.0 g/L was achieved when BSG aqueous extract (BSGE) was used. The substitution of yeast extract and peptone with BSY autolyzates did not show significant differences on BC concentration and productivity. The FTIR, SEM, and TGA analyses showed that the use of brewing by-products had no effect on the structure and thermal stability of the produced BC, compared to highly-pure and commercial substrates. The LCA of the developed bioprocess revealed that BSGE- and BSY-based media can reduce the carbon footprint of 1 kg dry BC by 76% compared to commercial-based-media. Beer by-products could serve as cost-effective resources to produce value-added and sustainable biopolymers such as BC, while minimizing waste and restructuring the brewing-industry.

Melatonin treatment delays the softening of blueberry fruit by modulating cuticular wax metabolism and reducing cell wall degradation

The effects of postharvest melatonin (MT) treatment on cuticular wax and cell wall metabolism in blueberry fruit (Vaccinium spp.) were evaluated. The results revealed that MT treatment maintained the cuticular wax rod-like structure and delayed wax degradation. The gas chromatography-mass spectrometry analysis results revealed that MT application changed the cuticular wax composition in blueberries, and 25 metabolic components were screened. The metabolic regulation of wax quality in blueberry fruit may therefore be influenced by MT. Additionally, MT slowed down pectin and cellulose degradation by reducing the activities of cell wall degrading enzymes like pectin methyl esterase polygalacturonase, β-galactosidase, and cellulose in the later stages of storage. It also downregulated the transcriptional expression of related genes like VcPE, VcPG, VcBG6, and VcGAL1. Thus, MT prevented softening and senescence by postponing the degradation of the cell wall in postharvest blueberry fruit.

Exploring Supramolecular Interactions between the Extracellular-Matrix-Derived Minimalist Bioactive Peptide and Nanofibrillar Cellulose for the Development of an Advanced Biomolecular Scaffold

It has been increasingly evident over the last few years that bioactive peptide hydrogels in conjugation with polymer hydrogels are emerging as a new class of supramolecular materials suitable for various biomedical applications owing to their specificity, tunability, and nontoxicity toward the biological system. Despite their unique biocompatible features, both polymer- and peptide-based scaffolds suffer from certain limitations, which restrict their use toward developing efficient matrices for controlling cellular behavior. The peptide hydrogels usually form soft matrices with low mechanical strength, whereas most of the polymer hydrogels lack biofunctionality. In this direction, combining polymers with peptides to develop a conjugate hydrogel can be explored as an emergent approach to overcome the limitations of the individual components. The polymer will provide high mechanical strength, whereas the biofunctionality of the material can be induced by the bioactive peptide sequence. In this study, we utilized TEMPO-oxidized nanofibrillar cellulose as the polymer counterpart, which was co-assembled with a short N-cadherin mimetic bioactive peptide sequence, Nap-HAVDI, to fabricate an NFC-peptide conjugate hydrogel. Interestingly, the mechanical strength of the peptide hydrogel was found to be significantly improved by combining the peptide with the NFC in the conjugate hydrogel. The addition of the peptide into the NFC also reduced the pore size within NFC matrices, which further helped in improving cellular adhesion, survival, and proliferation. Furthermore, the cells grown on the NFC and NFC-peptide hybrid hydrogel demonstrated normal expression of cytoskeleton proteins, i.e., β-tubulin in C6 cells and actin in L929 cells, respectively. The selective response of neuronal cells toward the specific bioactive peptide was further observed through a protein expression study. Thus, our study demonstrated the collective role of the cellulose-peptide composite material that revealed superior physical properties and biological response of this composite scaffold, which may open up a new platform for biomedical applications.

Comparative Analysis of G-Layers in Bast Fiber and Xylem Cell Walls in Flax Using Raman Spectroscopy

In a response to gravitropic stress, G-layers (gelatinous layers) were deposited in xylem cell walls of tilted flax plants. G-layers were produced in both tension wood (upper side) as expected but were also observed in opposite wood (lower side). Raman spectral profiles were acquired for xylem G-layers from the tension and opposite side as well as from the G-layer of bast fibers grown under non-tilted conditions. Statistical analysis by principal component analysis (PCA) and partial least square-discriminant analysis (PLS-DA) clearly distinguished bast fiber G-layers from xylem G-layers. Discriminating bands were observed for cellulose (380–1150–1376 cm–1), hemicelluloses (517–1094–1126–1452 cm–1) and aromatics (1270–1599–1658 cm–1). PCA did not allow separation of G-layers from tension/opposite-wood sides. In contrast, the two types of xylem G-layers could be incompletely discriminated through PLS-DA. Overall, the results suggested that while the architecture (polymer spatial distribution) of bast fibers G-layers and xylem G-layers are similar, they should be considered as belonging to a different cell wall layer category based upon ontogenetical and chemical composition parameters.

Non-destructive preservation state estimation of waterlogged archaeological wooden artifacts

Non-destructive preservation state estimation is an essential prerequisite for the preservation and conservation of waterlogged archaeological wooden artifacts. Herein, Near Infrared (NIR) spectroscopy coupled with orthogonal partial least squares discriminant analysis (OPLS-DA) were applied to assess sixty-four waterlogged archaeological woods collected from seven excavation sites in the period range of 2900 BCE-1912 CE, aiming at developing a non-destructive, accurate and rapid preservation state estimation methodology. The role of non-decayed recent wood of relevant species on preservation state estimation was studied in prior, showing the use of non-decayed recent wood could not improve the predictive ability. Besides, the high variability in terms of chemical structure between archaeological softwoods and archaeological hardwoods did affect the preservation state estimation. Thus, a simple OPLS-DA model of non-destructively distinguishing archaeological hardwoods from softwoods, R²X_cum of 0.659, R²Y_cum of 0.836 and Q²_cum of 0.763, was established to avoid and overcome destructive approach for wood identification. Then, the well-defined three grouped separations of slightly-decayed, moderately-decayed and severely-decayed waterlogged archaeological woods were revealed in OPLS-DA models, providing R²X_cum of 0.793, R²Y_cum of 0.738, Q²_cum of 0.680, and R²X_cum of 0.780, R²Y_cum of 0.901, Q²_cum of 0.870, for waterlogged archaeological hardwoods and waterlogged archaeological softwoods respectively. Potential predictive wood spectral bands were screened and tentatively identified as hydroxyls of crystalline cellulose, acetyl groups of hemicelluloses, C-H bands of lignin, which guaranteed the elimination of non-structural compounds, such as water and inorganic components interference. Furthermore, the developed NIR methodology was validated by an extensively used destructive method consisting of anatomical characteristics, maximum water content and basic density analyses. The results indicated that NIR coupled to chemometrics could non-destructively and accurately predict the preservation states of waterlogged archaeological wooden artifacts and avoid the interference of water and inorganic deposits.

Evaluation of the efficiency of a Venturi scrubber in particulate matter collection smaller than 2.5 µm emitted by biomass burning

Energy demand has increased worldwide, and biomass burning is one of the solutions most used by industries, especially in countries that have a great potential in agriculture, such as Brazil. However, these energy sources generate pollutants, consisting of particulate matter (PM) with a complex chemical composition, such as sugarcane bagasse (SB) burning. Controlling these emissions is necessary; therefore, the aim was to evaluate PM collection using a rectangular Venturi scrubber (RVS), and its effects on the composition of the PM emitted. Considering the appropriate use of biomass as an industrial fuel and the emerging need for a technique capable of efficiently removing pollutants from biomass burning, this study shows the control of emissions as an innovation in a situation such as the industrial one with the use of a Venturi scrubber in fine particle collection, in addition to using portable and representative isokinetic sampling equipment of these particles. The pilot-scale simulation of the biomass burning process, the representative sampling of fine particles and obtaining parameters to control pollutant emissions for a Venturi scrubber, meets the current situation of concern about air quality. The average collection efficiency values were 96.6% for PM_{> 2.5}, 85.5% for PM_1.0-2.5, and 66.9% for PM_{< 1.0}. The ionic analysis for PM_{< 1.0} filters showed potassium, chloride, nitrate, and nitrite at concentrations ranging from 20.12 to 36.5 μg/m³. As the ethanol and sugar plants will continue to generate electricity with sugarcane bagasse burning, emission control technologies and cost-effective and efficient portable samplers are needed to monitor particulate materials and improve current gas cleaning equipment projects.

Radial microfibril arrangements in wood cell walls

TEM and AFM imaging reveal radial orientations and whorl-like arrangements of cellulose microfibrils near the S1/S2 interface. These are explained by wrinkling during lamellar cell growth. In the most widely accepted model of the ultrastructure of wood cell walls, the cellulose microfibrils are arranged in helical patterns on concentric layers. However, this model is contradicted by a number of transmission electron microscopy (TEM) studies which reveal a radial component to the microfibril orientations in the cell wall. The idea of a radial component of the microfibril directions is not widely accepted, since it cannot easily be explained within the current understanding of lamellar cell growth. To help clarify the microfibril arrangements in wood cell walls, we have investigated various wood cell wall sections using both transmission electron microscopy and atomic force microscopy, and using various imaging and specimen preparation methods. Our investigations confirm that the microfibrils have a radial component near the interface between the S1 and S2 cell wall layers, and also reveal a whorl-like microfibril arrangement at the S1/S2 interface. These whorl-like structures are consistent with cell wall wrinkling during growth, allowing the radial microfibril component to be reconciled with the established models for lamellar cell growth.

Seasonal variations and potential sources of biomass burning tracers in particulate matter in Nanjing aerosols during 2017-2018

Biomass burning (BB) is an important source of atmospheric particulate matter and can adversely affect air quality, visibility, human health, and climate change. To study the characteristics and potential source regions of BB tracers in PM_2.5, a liquid chromatography-mass spectrometry instrument (HPLC-MS/MS) is applied in this study to develop and validate a method to determine organic tracers of BB in 397 aerosol samples. The total mean concentrations of 17 tracers measured in 2017 and 2018 were 333.32 ng m^-3 and 243.45 ng m^-3, respectively. Among them, the concentration of levoglucosan was the highest among all the tracers, with 325.63 ng m^-3 in 2017 and 237.47 ng m^-3 in 2018. The BB tracers showed obvious seasonal variations characteristics, most of which were abundant in winter. However, the concentrations of 3,4-dimethoxyacetic acid and sinapinic acid were higher in summer and spring than that in the other seasons. There were obvious differences in the Potential Source Contribution Factor (PSCF) model results of the BB's potential source area annually and in different seasons. The results of the potential source analysis showed that Beijing-Tianjin-Hebei had a great impact on the Nanjing air quality in 2017. Finally, five source factors for BB were identified based on the Positive Matrix Factor (PMF) model, and these were cellulose, hardwood, softwood, grass, and secondary formed. During the 2 years, cellulose was the largest contributor to biomass burning. Owing to the different fire conditions each year, the contribution of the five factors to the BB tracers was also different. For example, the contribution of softwood to the BB tracers was greater in 2018 (8.4%) than in 2017 (5.2%), while the contributions of hardwood and cellulose did not change significantly.

Production of a bio-magnetic adsorbent via co-pyrolysis of pine wood waste and red mud

The efficient reduction of accumulated waste biomass and red mud by converting them into a value-added magnetic adsorbent is both difficult and tempting in terms of sustainability. This study focused on investigating the reaction mechanism of co-pyrolysis of different biomasses, including pine wood, cellulose, and lignin, with red mud at 500, 650, and 800 °C, and the comprehensive characterizations of the produced bio-magnetic particles. The performance of biomass and red mud based magnetic adsorbents is also evaluated, and their primary adsorption mechanisms for organic pollutants are revealed by using different organic model compounds. The samples produced at 800 °C showed the best performance. For example, the sample prepared using red mud and pine wood at 800 °C showed the highest adsorption capacity of ibuprofen, which was 21.01 mg/g at ∼pH 4.5, indicating strong π stacking interactions as the dominant adsorption mechanism. When compared to lignin-rich biomass, adsorbents composed of cellulose-rich biomass showed greater adsorption efficacy. The findings show that co-pyrolysis of biomass with red mud can reduce waste while also producing a flexible adsorbent that is magnetically separable and effective at absorbing different organic contaminants from water.

Structural Characterization of Dietary Fiber from Different Lupin Species (Lupinus sp.)

Dietary fiber fractions of whole seeds from different lupin species were structurally characterized. The low-molecular-weight soluble dietary fiber fraction contains mainly stachyose and verbascose. The soluble dietary fiber fraction is dominated by homogalacturonan and rhamnogalacturonan type I (RGI), with (arabino-)galactans and to a lesser portion arabinans as neutral RGI side chains. Arabinans are preferentially branched in position O2 as demonstrated by methylation analysis and an arabinan profiling approach. Insoluble dietary fiber is mainly composed of cellulose and pectins, but xylans and xyloglucans are present, too. Application of an enzymatic xyloglucan profiling approach demonstrated a substitution degree of 75% and proved the existence of fucosylated xyloglucans. Lignin of all lupin species was analyzed as being rich in guaiacyl units; however, the degree of lignification is low. Alcohol-insoluble residue polysaccharides from both seed coat and embryo/endosperm were analyzed separately, demonstrating tissue-related differences in the portions of cellulose and RGI.

Potential for the valorisation of brewer's spent grains: A case study for the sequential extraction of saccharides and lignin

This study highlights the possibility of using brewers' grains (BSGs) for the successive extraction of the main lignocellulosic biopolymers, namely, cellulose, hemicelluloses and lignin. An exhaustive chemical characterisation revealed a variability of composition in distinct batches of BSGs, depending on their origin and the brewing process used. In particular, the protein content can vary from 13wt% to 23wt%, which is accompanied by a change in the hemicelluloses content from 9% to 23% (in the samples of our study). By applying a two-step aqueous treatment, involving an acid (1.25% v/v aq. H₂SO₄) and a base (3% w/v aq. NaOH) at a temperature of 120°C and fixed reaction time of a few tens of minutes (15-90 minutes), more than 80% of hemicelluloses could be recovered. Cellulose could be isolated at more than 68%, while a high purity lignin could be recovered from a lignin-rich fraction (70wt%). Our work also suggests that the variability of the chemical composition of these BSGs is a hindrance to achieving process standardisation and large-scale exploitation. The pooling of various materials is therefore not a recommended option, and the preliminary chemical analysis of the composition is therefore a prerequisite for an efficient extraction process.

Rapid Measurement of Cellulose, Hemicellulose, and Lignin Content in Sargassum horneri by Near-Infrared Spectroscopy and Characteristic Variables Selection Methods

Near-infrared (NIR) spectroscopy and characteristic variables selection methods were used to develop a quick method for the determination of cellulose, hemicellulose, and lignin contents in Sargassum horneri. Calibration models for cellulose, hemicellulose, and lignin in Sargassum horneri were established using partial least square regression methods with full variables (full-PLSR). The PLSR calibration models were established by four characteristic variables selection methods, including interval partial least square (iPLS), competitive adaptive reweighted sampling (CARS), correlation coefficient (CC), and genetic algorithm (GA). The results showed that the performance of the four calibration models, namely iPLS-PLSR, CARS-PLSR, CC-PLSR, and GA-PLSR, was better than the full-PLSR calibration model. The iPLS method was best in the performance of the models. For iPLS-PLSR, the determination coefficient (R2), root mean square error (RMSE), and residual predictive deviation (RPD) of the prediction set were as follows: 0.8955, 0.8232%, and 3.0934 for cellulose, 0.8669, 0.4697%, and 2.7406 for hemicellulose, and 0.7307, 0.7533%, and 1.9272 for lignin, respectively. These findings indicate that the NIR calibration models can be used to predict cellulose, hemicellulose, and lignin contents in Sargassum horneri quickly and accurately.

Electrospun ethyl cellulose/poly caprolactone/gelatin nanofibers: The investigation of mechanical, antioxidant, and antifungal properties for food packaging

The purpose of the present research was to fabricate ethylcellulose (ECL)/polycaprolactone (PCL)/gelatin (GEL) electrospun nanofibers containing Zataria multiflora essential oil (ZEO) and zinc oxide nanoparticle (ZnO) to provide an appropriate substrate for food packaging. The ECL/PCL/GEL was incorporated with ZEO and ZnO at the concentrations of 10, 20, 30 and 50 wt% and 3 wt%, respectively. The results of ECL/PCL/GEL/ZEO/ZnO nanofiber exhibited uniform morphology with a mean diameter ranging from 361.85 ± 18.7 to 467.33 ± 14.50 nm and enhanced thermal stability. The ECL/PCL/GEL/ZEO/ZnO nanofiber had the highest mechanical parameters, such as young's modulus (437.49 ± 18), tensile strength (7.88 ± 0.7), and elongation at break (5.02 ± 0.6) and water contact angle (61.13 ± 0.5), compared with the other nanofibers. The cell viability during 48 and 72 h was obtained to be about more than 80% for all the nanofibers. Additionally, the ECL/PCL/GEL incorporated with 50% ZEO and 3% ZnO displayed the highest antioxidant activity (34.61 ± 1.98%) and antifungal properties against Penicillium notatum and Aspergillus niger. In general, the ECL/PCL/GEL with the weight ratio of 20:70:10 nanofiber incorporated with 30% ZEO and 3% ZnO was obtained to have appropriate mechanical, antioxidant, and antimicrobial properties and thermal stability.

Determination of hemicellulose, cellulose, holocellulose and lignin content using FTIR in Calycophyllum spruceanum (Benth.) K. Schum. and Guazuma crinita Lam

Capirona (Calycophyllum spruceanum (Benth.) K. Schum.) and Bolaina (Guazuma crinita Lam.) are fast-growing Amazonian trees with increasing demand in timber industry. Therefore, it is necessary to determine the content of cellulose, hemicellulose, holocellulose and lignin in juvenile trees to accelerate forest breeding programs. The aim of this study was to identify chemical differences between apical and basal stem of Capirona and Bolaina to develop models for estimating the chemical composition using Fourier transform infrared (FTIR) spectra. FTIR-ATR spectra were obtained from 150 samples for each species that were 1.8 year-old. The results showed significant differences between the apical and basal stem for each species in terms of cellulose, hemicellulose, holocellulose and lignin content. This variability was useful to build partial least squares (PLS) models from the FTIR spectra and they were evaluated by root mean squared error of predictions (RMSEP) and ratio of performance to deviation (RPD). Lignin content was efficiently predicted in Capirona (RMSEP = 0.48, RPD > 2) and Bolaina (RMSEP = 0.81, RPD > 2). In Capirona, the predictive power of cellulose, hemicellulose and holocellulose models (0.68 < RMSEP < 2.06, 1.60 < RPD < 1.96) were high enough to predict wood chemical composition. In Bolaina, model for cellulose attained an excellent predictive power (RMSEP = 1.82, RPD = 6.14) while models for hemicellulose and holocellulose attained a good predictive power (RPD > 2.0). This study showed that FTIR-ATR together with PLS is a reliable method to determine the wood chemical composition in juvenile trees of Capirona and Bolaina.

An aptamer highly specific to cellulose enables the analysis of the association of cellulose with matrix cell wall polymers in vitro and in muro

The current toolbox of cell wall-directed molecular probes has been pivotal for advancing basic and application-oriented plant carbohydrate research; however, it still exhibits limitations regarding target diversity and specificity. Scarcity of probes targeting intramolecular associations between cell wall polymers particularly hinders our understanding of the cell wall microstructure and affects the development of effective means for its efficient deconstruction for bioconversion. Here we report a detailed characterization of a cellulose-binding DNA aptamer CELAPT MINI using a combination of various in vitro biochemical, biophysical, and molecular biology techniques. Our results show evidence for its high specificity towards long non-substituted β-(1-4)-glucan chains in both crystalline and amorphous forms. Fluorescent conjugates of CELAPT MINI are applicable as in situ cellulose probes and are well suited for various microscopy techniques, including super-resolution imaging. Compatibility of fluorescent CELAPT MINI variants with immunodetection of cell wall matrix polymers enabled them simultaneously to resolve the fibrillar organization of complex cellulose-enriched pulp material and to quantify the level of cellulose masking by xyloglucan and xylan. Using enzymatically, chemically, or genetically modulated Brachypodium internode sections we showed the diversity in cell wall packing among various cell types and even cell wall microdomains. We showed that xylan is the most prominent, but not the only, cellulose-masking agent in Brachypodium internode tissues. These results collectively highlight the hitherto unexplored potential to expand the cell wall probing toolbox with highly specific and versatile in vitro generated polynucleotide probes.

Characterization of Bacterial Cellulose Produced by Acetobacter xylinum Strain LKN6 Using Sago Liquid Waste as Nutrient Source

&lt;b&gt;Background and Objective:&lt;/b&gt; Bacterial Cellulose (BC) is an exopolysaccharide produced by bacteria with unique structural and mechanical properties and is highly pure compared to plant cellulose. This study aimed to produce novel bacterial cellulose using sago liquid waste substrate and evaluate its characteristics as a potential bioplastic.&lt;b&gt;Materials and Methods:&lt;/b&gt; Production of BC by static batch fermentation was studied in sago liquid waste substrate usingAcetobacter xylinumLKN6. The BC structure was analyzed by Scanning Electron Microscopy (SEM) and Fourier Transform infrared spectroscopy (FT-IR). Mechanical properties were measured include tensile strength, elongation at break, elasticity (Young's modulus) and Water Holding Capacity (WHC). &lt;b&gt;Results:&lt;/b&gt; The BC yield from sago liquid waste as a nutrients source was achieved 12.37 g L&lt;sup&gt;1&lt;/sup&gt; and the highest BC yield 14.52 g L&lt;sup&gt;1&lt;/sup&gt; in sago liquid waste medium with a sugar concentration of 10% (w/v) after 14 days fermentation period. The existence of bacterial cellulose is proven by FT-IR spectroscopy analysis based on the appearance of absorbance peaks, which are C-C bonding, C-O bonding, C-OH bonding and C-O-C bonding and represents the fingerprints of pure cellulose. The mechanical properties of BC from sago liquid waste were showed a tensile strength of 44.2-87.3 MPa, elongation at break of 4.8-5.8%, Young's Modulus of 0.86-1.64 GPa and water holding capacity of 85.9-98.6 g g&lt;sup&gt;1&lt;/sup&gt;. &lt;b&gt;Conclusion:&lt;/b&gt; The results suggest that sago liquid waste has great potential to use as a nutrient source in the production of bacterial cellulose and BC's prospect as the bioplastic.

Effect of sugarcane bagasse as industrial by-products treated with Lactobacillus casei TH14, cellulase and molasses on feed utilization, ruminal ecology and milk production of mid-lactating Holstein Friesian cows

BACKGROUND

The study aimed to evaluate the effect of Lactobacillus casei TH14, cellulase, and molasses combination fermented sugarcane bagasse (SB) as an exclusive roughage source in the total mixed ration (TMR) for mid-lactation 75% crossbred Holstein cows on feed intake, digestibility, ruminal ecology, milk yield and milk composition. Four multiparous mid-lactation crossbred (75% Holstein Friesian and 25% Thai native breed) dairy cows of 439 ± 16 kg body weight, 215 ± 5 days in milk and average milk yield 10 ± 2 kg d^-1 were assigned to a 4 × 4 Latin square design. The unfermented SB (SB-TMR), SB fermented with cellulase and molasses (CM-TMR), SB fermented with L. casei TH14 and molasses (LM-TMR), and SB fermented with L. casei TH14, cellulase and molasses (LCM-TMR) were used as dietary treatments.

RESULTS

CM-TMR, LM-TMR and LCM-TMR significantly (P < 0.01) increased dry matter and fiber digestibility, gross energy and metabolizable energy intake (P < 0.05), blood glucose, total volatile fatty acids (P < 0.05), propionic acid and milk yield, but decreased ammonia, acetic acid, acetic:propionic ratio and methane production (P < 0.05) when compared with the SB-TMR. Compared with fermented SB treatments, LCM-TMR had lower (P < 0.05) ruminal ammonia and greater blood glucose (P < 0.01); LCM-TMR showed (P < 0.05) greater volatile fatty acids, propionic acid, milk yield and total solids, and lower acetic:propionic ratio (P < 0.01); methane, protozoa and somatic cell count were found to be lowest in LCM-TMR.

CONCLUSION

Combination of L. casei TH14 and additives (LCM-TMR) effectively enhanced feed use, rumen ecology and milk production of Holstein Friesian cows. © 2021 Society of Chemical Industry.

Cytocompatible cellulose nanofibers from invasive plant species Agave americana L. and Ricinus communis L.: a renewable green source of highly crystalline nanocellulose

In this study, the fibers of invasive species Agave americana L. and Ricinus communis L. were successfully used for the first time as new sources to produce cytocompatible and highly crystalline cellulose nanofibers. Cellulose nanofibers were obtained by two methods, based on either alkaline or acid hydrolysis. The morphology, chemical composition, and crystallinity of the obtained materials were characterized by scanning electron microscopy (SEM) together with energy-dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy. The crystallinity indexes (CIs) of the cellulose nanofibers extracted from A. americana and R. communis were very high (94.1% and 92.7%, respectively). Biological studies evaluating the cytotoxic effects of the prepared cellulose nanofibers on human embryonic kidney 293T (HEK293T) cells were also performed. The nanofibers obtained using the two different extraction methods were all shown to be cytocompatible in the concentration range assayed (i.e., 0‍‒‍500 µg/mL). Our results showed that the nanocellulose extracted from A. americana and R. communis fibers has high potential as a new renewable green source of highly crystalline cellulose-based cytocompatible nanomaterials for biomedical applications.

Rapid detection of cellulose and hemicellulose contents of corn stover based on near-infrared spectroscopy combined with chemometrics

The feasibility of near-infrared spectroscopy (NIRS) combined with chemometrics for the rapid detection of the cellulose and hemicellulose contents in corn stover is discussed. Competitive adaptive reweighted sampling (CARS) and genetic simulated annealing algorithm (GSA) were combined (CARS-GSA) to select the characteristic wavelengths of cellulose and hemicellulose and to reduce the dimensionality and multicollinearity of the NIRS data. The whole spectra contained 1845 wavelength variables. After CARS-GSA optimization, the number of characteristic wavelengths of cellulose (hemicellulose) was reduced to 152 (260), accounting for 8.24% (14.09%) of all wavelengths. The coefficients of determination of the regression models for predicting the cellulose and hemicellulose contents were 0.968 and 0.996, the root mean square errors of prediction (RMSEPs) were 0.683 and 0.648, and the residual predictive deviations (RPDs) were 5.213 and 16.499, respectively. The RMSEP of the cellulose and hemicellulose regression models was 0.152 and 0.190 lower for CARS-GSA than for the full-spectrum, and the RPD was increased by 0.949 and 3.47, respectively. The results showed that the CARS-GSA model substantially reduced the number of characteristic wavelengths and significantly improved the predictive ability of the regression model.

Micro-FTIR combined with curve fitting method to study cellulose crystallinity of developing cotton fibers

This study aimed to use micro-FTIR with transmission mode to investigate cellulose crystallinity of developing cotton fibers. Compared with ATR-FTIR method, we found that micro-FTIR can obtain more information of cellulose inside of the developing cotton fibers, especially in high wavenumber of 2800-3000 cm^-1 region. Combined with curve fitting method, a new IR crystallinity index (CI) method named wax crystallinity index (WCI) was introduced to evaluate the cellulose crystallinity in the development of cotton fibers based on the peak and area ratios of 2900 cm^-1/2850 cm^-1 and 2900 cm^-1/2920 cm^-1. The obtained WCI values demonstrated an excellent coefficient of determination with X-ray diffraction (XRD) CI method with the value up to 0.99. This study suggested that micro-FTIR was an effective technique to qualitatively analyze the crystallinity in developing cotton fibers combined with curve fitting method.

Agave: a natural renewable resource with multiple applications

Agaves are a group of succulent plants that thrive in arid or semiarid environments. Indeed, genes associated with their resilience are a potential resource for genetic engineering of other agronomically important crops grown in adverse climates. Agave is mainly used for the production of distilled (spirits) and non-distilled alcoholic beverages, including tequila, mezcal, bacanora, raicilla, and pulque, all of which have special connections to Mexican history and culture, and contribute to the Mexican economy. In recent years, there has been growing interest to maximize the use of agave plant materials for other purposes, as the bulk of their biomass pre- and post-production is wasted. In traditional practice, during the passage from fields to factories, only agave cores are used, and the leaves and bagasse are not always harnessed. To place this in perspective, during the period from 2010 to 2019, 2674.7 × 10⁶  L of tequila was produced in Mexico, which required 9 607 400 tons of agave cores. This generated approximately the same amount of leaves and 3 842 960 tons of bagasse. The economic base of agave plants can be expanded if expended biomass could be transformed into products that are useful for applications in food, forage, ensilage, agriculture, medicine, energy, environment, textiles, cosmetics, and esthetics. This review focuses on the current utility of agave plants, as well as our perspective for future studies and uses of this formidable plant. © 2020 Society of Chemical Industry.

Comparative cellular, physiological and transcriptome analyses reveal the potential easy dehulling mechanism of rice-tartary buckwheat (Fagopyrum Tararicum)

BACKGROUND

Tartary buckwheat has gained popularity in the food marketplace due to its abundant nutrients and high bioactive flavonoid content. However, its difficult dehulling process has severely restricted its food processing industry development. Rice-tartary buckwheat, a rare local variety, is very easily dehulled, but the cellular, physiological and molecular mechanisms responsible for this easy dehulling remains largely unclear.

RESULTS

In this study, we integrated analyses of the comparative cellular, physiological, transcriptome, and gene coexpression network to insight into the reason that rice-tartary buckwheat is easy to dehull. Compared to normal tartary buckwheat, rice-tartary buckwheat has significantly brittler and thinner hull, and thinner cell wall in hull sclerenchyma cells. Furthermore, the cellulose, hemicellulose, and lignin contents of rice-tartary buckwheat hull were significantly lower than those in all or part of the tested normal tartary buckwheat cultivars, respectively, and the significant difference in cellulose and hemicellulose contents between rice-tartary buckwheat and normal tartary buckwheat began at 10 days after pollination (DAP). Comparative transcriptome analysis identified a total of 9250 differentially expressed genes (DEGs) between the rice- and normal-tartary buckwheat hulls at four different development stages. Weighted gene coexpression network analysis (WGCNA) of all DEGs identified a key module associated with the formation of the hull difference between rice- and normal-tartary buckwheat. In this specific module, many secondary cell wall (SCW) biosynthesis regulatory and structural genes, which involved in cellulose and hemicellulose biosynthesis, were identified as hub genes and displayed coexpression. These identified hub genes of SCW biosynthesis were significantly lower expression in rice-tartary buckwheat hull than in normal tartary buckwheat at the early hull development stages. Among them, the expression of 17 SCW biosynthesis relative-hub genes were further verified by quantitative real-time polymerase chain reaction (qRT-PCR).

CONCLUSIONS

Our results showed that the lower expression of SCW biosynthesis regulatory and structural genes in rice-tartary buckwheat hull in the early development stages contributes to its easy dehulling by reducing the content of cell wall chemical components, which further effects the cell wall thickness of hull sclerenchyma cells, and hull thickness and mechanical strength.

Leaf transition from heterotrophy to autotrophy is recorded in the intraleaf C, H and O isotope patterns of leaf organic matter

RATIONALE

Quantitatively relating ¹³ C/¹² C, ² H/¹ H and ¹⁸ O/¹⁶ O ratios of plant α-cellulose and ² H/¹ H of n-alkanes to environmental conditions and metabolic status should ideally be based on the leaf, the plant organ most sensitive to environmental change. The fact that leaf organic matter is composed of isotopically different heterotrophic and autotrophic components means that it is imperative that one be able to disentangle the relative heterotrophic and autotrophic contributions to leaf organic matter.

METHODS

We tackled this issue by two-dimensional sampling of leaf water and α-cellulose, and specific n-alkanes from greenhouse-grown immature and mature and field-grown mature banana leaves, taking advantage of their large areas and thick waxy layers. Leaf water, α-cellulose and n-alkane isotope ratios were then characterized using elemental analysis isotope ratio mass spectrometry (IRMS) or gas chromatography IRMS. A three-member (heterotrophy, autotrophy and photoheterotrophy) conceptual linear mixing model was then proposed for disentangling the relative contributions of the three trophic modes.

RESULTS

We discovered distinct spatial leaf water, α-cellulose and n-alkane isotope ratio patterns that varied with leaf developmental stages. We inferred from the conceptual model that, averaged over the leaf blade, only 20% of α-cellulose in banana leaf is autotrophically laid down in both greenhouse-grown and field-grown banana leaves, while approximately 60% and 100% of n-alkanes are produced autotrophically in greenhouse-grown and field-grown banana leaves, respectively. There exist distinct lateral (edge to midrib) gradients in autotrophic contributions of α-cellulose and n-alkanes.

CONCLUSIONS

Efforts to establish quantitative isotope-environment relationships should take into account the fact that the evaporative leaf water ¹⁸ O and ² H enrichment signal recorded in autotrophically laid down α-cellulose is significantly diluted by the heterotrophically formed α-cellulose. The δ² H value of field-grown mature banana leaf n-alkanes is much more sensitive than α-cellulose as a recorder of the growth environment. Quantitative isotope-environment relationship based on greenhouse-grown n-alkane δ² H values may not be reliable.

Discrepancy of lignin dissolution from eucalyptus during formic acid fractionation

Understanding the structure and properties of lignin has important practical significance for its further applications. In this case, eucalyptus was fractionated with 88% formic acid at 101 °C for different durations, and the removal efficiency as well as the chemical structure of lignin at various stages were comparatively analyzed. The obtained data indicated that with increasing reaction time, lignin was continuously removed and the process could be divided into three stages. The lignin dissolution rate was fast first and then slow, and the molecular weight of the dissolved lignin increased with time. The lignin structure was condensed and the molecular weight increased with prolonged of reaction time. Structural analysis indicated that the β-O-4' structure was largely destroyed, the G-type lignin dissolved early, and the degradation of the S-type lignin became more intensive with increasing reaction time. This is of great help for reaction control as well as the further processing of lignin byproducts.

Cell wall remodeling under salt stress: Insights into changes in polysaccharides, feruloylation, lignification, and phenolic metabolism in maize

Although cell wall polymers play important roles in the tolerance of plants to abiotic stress, the effects of salinity on cell wall composition and metabolism in grasses remain largely unexplored. Here, we conducted an in-depth study of changes in cell wall composition and phenolic metabolism induced upon salinity in maize seedlings and plants. Cell wall characterization revealed that salt stress modulated the deposition of cellulose, matrix polysaccharides and lignin in seedling roots, plant roots and stems. The extraction and analysis of arabinoxylans by size-exclusion chromatography, 2D-NMR spectroscopy and carbohydrate gel electrophoresis showed a reduction of arabinoxylan content in salt-stressed roots. Saponification and mild acid hydrolysis revealed that salinity also reduced the feruloylation of arabinoxylans in roots of seedlings and plants. Determination of lignin content and composition by nitrobenzene oxidation and 2D-NMR confirmed the increased incorporation of syringyl units in lignin of maize roots. Salt stress also induced the expression of genes and the activity of enzymes enrolled in phenylpropanoid biosynthesis. The UHPLC-MS-based metabolite profiling confirmed the modulation of phenolic profiling by salinity and the accumulation of ferulate and its derivatives 3- and 4-O-feruloyl quinate. In conclusion, we present a model for explaining cell wall remodeling in response to salinity.

IR characterization of plant leaves, endemic to semi-tropical regions, in two senescent states

We are developing a robust and economic electro-optical remote sensing methodology to monitor the state of health and hydration of trees, endemic to subtropical regions. We measured reflectance spectra with Fourier transform infrared (FTIR) of three samples of two different oak trees. We find that spectral bands suitable for monitoring the state of the health and senescence of the oak include intervals around 0.9 µm and 1.8 µm. The easiest and the most cost-effective strategy would be to implement an electro-optical remote sensing radiometric system featuring a commercial camera incorporating a traditional charge-coupled device (CCD) or complementary metal-oxide-semiconductor (CMOS) detectors and a wideband transmission filter, from about 0.8 to 1 µm.

Various effects of the expression of the xyloglucanase gene from Penicillium canescens in transgenic aspen under semi-natural conditions

BACKGROUND

Recombinant carbohydrases genes are used to produce transgenic woody plants with improved phenotypic traits. However, cultivation of such plants in open field is challenging due to a number of problems. Therefore, additional research is needed to alleviate them.

RESULTS

Results of successful cultivation of the transgenic aspens (Populus tremula) carrying the recombinant xyloglucanase gene (sp-Xeg) from Penicillium canescens in semi-natural conditions are reported in this paper for the first time. Change of carbohydrate composition of wood was observed in transgenic aspens carrying the sp-Xeg gene. The transformed transgenic line Xeg-2-1b demonstrated accelerated growth and increased content of cellulose in wood of trees growing in both greenhouse and outside in comparison with the control untransformed line Pt. The accelerated growth was observed also in the transgenic line Xeg-1-1c. Thicker cell-wall and longer xylem fiber were also observed in both these transgenic lines. Undescribed earlier considerable reduction in the wood decomposition rate of the transgenic aspen stems was also revealed for the transformed transgenic lines. The decomposition rate was approximately twice as lower for the transgenic line Xeg-2-3b in comparison with the control untransformed line Pt.

CONCLUSION

A direct dependence of the phenotypic and biochemical traits on the expression of the recombinant gene sp-Xeg was demonstrated. The higher was the level of the sp-Xeg gene expression, the more pronounced were changes in the phenotypic and biochemical traits. All lines showed phenotypic changes in the leave traits. Our results showed that the plants carrying the recombinant sp-Xeg gene do not demonstrate a decrease in growth parameters in semi-natural conditions. In some transgenic lines, a change in the carbohydrate composition of the wood, an increase in the cell wall thickness, and a decrease in the rate of decomposition of wood were observed.

Applicability of Low-Cost Binders for the Quantitative Elemental Analysis of Urinary Stones Using EDXRF Based on Fundamental Parameter Approach

The pressed powder sample is a common method for elemental analysis using X-ray fluorescence analysis whereas suitable light hydrocarbon materials should be added to the sample as a binder. The present study demonstrates the applicability of using different commercial binders for elemental analysis of urinary stone samples. In order to confirm the obtained results, a comparison with pure chemical grade binders was presented. Different commercial and pure binders were tested for quantitative elemental analysis of urinary stones, namely, cellulose, starch, wax, and urea. Energy dispersive X-ray fluorescence (EDXRF) was used for elemental analysis. Differential thermal analysis was used to estimate the loss on ignition (LOI) in the urinary stone samples. The signal to background ratios (I/I_B) of the different detected elements in the commercial and pure binders were calculated, compared, and studied at eight different photon energies starting from 2.5 up to 37 keV. Standard-less quantitative analysis method based on the fundamental parameter approach was applied for elemental analysis of selected urinary stones. The commercial and low-cost binders could be an excellent alternative binder for urinary stone analysis using energy dispersive X-ray fluorescence. The commercial binders could provide an advantage as pure chemical grade binders or even better especially at photon energy higher than 10 keV. The best commercial binder candidate was found to be the wax. The quantitative analysis results using commercial and pure chemical grade binders give good agreement results, which indicate the applicability of commercial binders for quantitative elemental analysis of urinary stones in the form of pressed powder samples.

End-to-end continuous manufacturing of conventional compressed tablets: From flow synthesis to tableting through integrated crystallization and filtration

An end-to-end continuous pharmaceutical manufacturing process was developed for the production of conventional direct compressed tablets on a proof-of-concept level for the first time. The output reaction mixture of the flow synthesis of acetylsalicylic acid was crystallized continuously in a mixed suspension mixed product removal crystallizer. The crystallizer was directly connected to a continuous filtration carousel device, thus the crystallization, filtration and drying of acetylsalicylic acid (ASA) was carried out in an integrated 2-step process. Steady state was reached during longer operations and the interaction of process parameters was evaluated in a series of experiments. The filtered crystals were ready for further processing in a following continuous blending and tableting experiment due to the good flowability of the material. The ASA collected during the crystallization-filtration experiments was fed into a continuous twin-screw blender along with microcrystalline cellulose as tableting excipient. After continuous blending Near-Infrared spectroscopy was applied to in-line analyze the drug content of the powder mixture. A belt conveyor carried the mixture towards an eccentric lab-scale tablet press, which continuously produced 500 mg ASA-loaded compressed tablets of 100 mg dose strength. Thus, starting from raw materials, the final drug product was obtained by continuous manufacturing steps with appropriate quality.

Pectic galactan affects cell wall architecture during secondary cell wall deposition

β-(1,4)-galactan determines the interactions between different matrix polysaccharides and cellulose during the cessation of cell elongation. Despite recent advances regarding the role of pectic β-(1,4)-galactan neutral side chains in primary cell wall remodelling during growth and cell elongation, little is known about the specific function of this polymer in other developmental processes. We have used transgenic Arabidopsis plants overproducing chickpea βI-Gal β-galactosidase under the 35S CaMV promoter (35S::βI-Gal) with reduced galactan levels in the basal non-elongating floral stem internodes to gain insight into the role of β-(1,4)-galactan in cell wall architecture during the cessation of elongation and the beginning of secondary growth. The loss of galactan mediated by βI-Gal in 35S::βI-Gal plants is accompanied by a reduction in the levels of KOH-extracted xyloglucan and an increase in the levels of xyloglucan released by a cellulose-specific endoglucanase. These variations in cellulose-xyloglucan interactions cause an altered xylan and mannan deposition in the cell wall that in turn results in a deficient lignin deposition. Considering these results, we can state that β-(1,4)-galactan plays a key structural role in the correct organization of the different domains of the cell wall during the cessation of growth and the early events of secondary cell wall development. These findings reinforce the notion that there is a mutual dependence between the different polysaccharides and lignin polymers to form an organized and functional cell wall.

A predictive spatial model for roasted coffee using oxygen isotopes of α-cellulose

RATIONALE

Fraudulent region-of-origin labeling is a concern for high-value, globally traded commodities such as coffee. The oxygen isotope ratio of cellulose is a useful geographic tracer, as it integrates climate and source water signals. A predictive spatial model ("isoscape") of the δ¹⁸ O values of coffee bean cellulose is generated to evaluate coffee region-of-origin claims.

METHODS

The oxygen isotope ratio of α-cellulose extracted from roasted coffee beans was measured via high-temperature conversion elemental analyzer/isotope ratio mass spectrometry (TC-EA/IRMS) and used to calculate the δ¹⁸ O value of coffee bean water. The ¹⁸ O enrichment of coffee bean water relative to the δ¹⁸ O value of local precipitation was modeled as a function of local temperature and humidity. This function was incorporated into a mechanistic model of cellulose δ¹⁸ O values to predict the δ¹⁸ O values of coffee bean cellulose across coffee-producing regions globally.

RESULTS

The δ¹⁸ O values of analyzed coffee bean cellulose ranged from approximately +22‰ to +42‰ (V-SMOW). As expected, coffees grown in the same region tended to have similar isotope ratios, and the δ¹⁸ O value of coffee bean cellulose was generally higher than the δ¹⁸ O value of modeled stem cellulose for the region. Modeled δ¹⁸ O values of coffee cellulose were within ±2.3‰ of the measured δ¹⁸ O value of coffee cellulose.

CONCLUSIONS

The oxygen isotope ratio of coffee bean cellulose is a useful indicator of region-of-origin and varies predictably in response to climatic factors and precipitation isotope ratios. The isoscape of coffee bean cellulose δ¹⁸ O values from this study provides a quantitative tool that can be applied to region-of-origin verification of roasted coffee at the point-of-sale.

An approach to assess and identify polymers in the health-care waste of a Brazilian university hospital

This work presents the health-care waste (HCW) management and an approach to assess and identify polymers in a General Surgery Unit - Internment Service (GSU) of a Brazilian university hospital, to estimate the main polymers presenting in medical devices that are consumed during a year, discarded either as infecting (Group A) or as scarifying residue (Group E). Among the waste produced from the medical devices, 3.14 ton (98.79%) were composed of polymers (63.06% of plastics and 35.73% elastomers) while around 0.03 ton (1.21%) by metals. The proposed approach is composed of 4 steps: (1) Collecting data about consumed medical devices to be categorized into the residues Groups (A and E); (2) Identifying the polymeric composition with information provided by suppliers; (3) Characterizing the polymer functional groups by Fourier-Transform Infrared Spectroscopy (FTIR) and (4) Determining the polymer melting point by Differential Scanning Calorimetry (DSC). According to the results, the analyzed HCW was composed mainly of polypropylene (80.88%), high-density polyethylene (5.28%), polystyrene (4.51%), and cellulose (3.58%), from a total of 11 different polymers.

Subacute feeding toxicity of low-sodium sausages manufactured with sodium substitutes and biopolymer-encapsulated saltwort (Salicornia herbacea) in a mouse model

BACKGROUND

Low-sodium sausages were manufactured using sodium substitution and biopolymer encapsulation. A diet comprising 10% treatment sausages (six treatment groups: C (100% NaCl), T1 (55% sodium substitute + 45% saltwort salt), T2 (55% sodium substitute + 45% saltwort salt with chitosan), T3 (55% sodium substitute + 45% saltwort salt with cellulose), T4 (55% sodium substitute + 45% saltwort salt with dextrin), and T5 (55% sodium substitute + 45% saltwort salt with pectin)) was added to a 90% commercial mouse diet for 4 weeks.

RESULTS

Subacute toxicity, hematology, liver function, and organ weight tests in low-sodium sausage groups showed results similar to those of the control group, and all toxicity test levels were within normal ranges.

CONCLUSIONS

All low-sodium sausage types tested are suggested to be safe in terms of subacute toxicity. Moreover, low-sodium sausages can be manufactured by biopolymer encapsulation of saltwort using pectin, chitosan, cellulose, and dextrin without toxicity. © 2019 Society of Chemical Industry.

Microplastic contamination in Penaeid shrimp from the Northern Bay of Bengal

Microplastic pollution has received increased attention recently due to potential threat to marine biota and human health. This study reports microplastic (MP) content in brown shrimp (Metapenaeus monocerous) and tiger shrimp (Penaeus monodon) inhabiting in the shallow and offshore waters of the Northern Bay of Bengal, Bangladesh. Gastrointestinal tract (GT) of shrimps (n = 150) were examined for MPs following alkali digestion, microscopic observation and chemical analysis by micro-Fourier Transformed Infrared Spectroscope (μFTIR). A total of 33 and 39 MP items were found in P. monodon and M. monocerous, averaging 3.40 ± 1.23 and 3.87 ± 1.05 items/g GT, respectively. Among various shapes, types and colours of MP, filament (57-58%), fiber (32-57%) and black (48-51%) were dominant amongst the various particles identified. Tiger shrimp had high numbers (23 items) of larger size fractions of MPs (1-5 mm) but brown shrimp had high numbers (15 items) of smaller MPs (250-500 μm), and μ-FTIR data confirmed 13 particles of polyamide-6 and 6 particles of rayon polymers. These results provide a baseline of MP contamination in seafood from Bangladesh that should be useful for future monitoring efforts.

Imaging and Analysis of the Content of Callose, Pectin, and Cellulose in the Cell Wall of Arabidopsis Pollen Tubes Grown In Vitro

To achieve fertilization, pollen tubes have to protect and properly deliver sperm cells through the pistil to the ovules. Pollen tube growth is a representative example of polarized growth where new components of the cell wall and plasma membrane are continuously deposited at the tip of the growing cell. The integrity of the cell wall is of fundamental importance to maintain apical growth. For this reason, pollen tube growth has become an excellent model to study the role of polysaccharides and structural cell wall proteins involved in polar cell expansion. However, quantification of structural polysaccharides at the pollen tube cell wall has been challenging due to technical complexity and the difficulty of finding specific dyes. Here, we propose simple methods for imaging and quantification of callose, pectin , and cellulose using specific dyes such as Aniline Blue, Propidium Iodide, and Pontamine Fast Scarlet 4B.

Pretreatment of Wheat Straw with Phosphoric Acid and Hydrogen Peroxide to Simultaneously Facilitate Cellulose Digestibility and Modify Lignin as Adsorbents

Effective valorization of lignin is crucial to achieve a sustainable, economic and competitive biorefinery of lignocellulosic biomass. In this work, an integrated process was proposed based on a concentrated phosphoric acid plus hydrogen peroxide (PHP) pretreatment to simultaneously facilitate cellulose digestibility and modify lignin as adsorbent. As a dominant constitutor of PHP pretreatment, H2O2 input and its influence on the overall fractionation/lignin modification performance was thoroughly investigated. Results indicated that wheat straw was fractionated more efficiently by increasing the H2O2 input. H2O2 input had a significant influence on the digestibility of the obtained cellulose-rich fraction whereby almost 100.0% cellulose-glucose conversion can be achieved even with only 0.88% H2O2 input. Besides, the adsorption capacity of lignin on MB was improved (74.3 to 210.1 mg g-1) due to the oxidative-modification in PHP pretreatment with H2O2 inputs. Regression analysis indicated that -COOH groups mainly governed the lignin adsorption (R2 = 0.946), which displayed the considerable adsorption capacities for typical cationic substances. This work shows a promising way to integrate the lignin modification concept into the emerging PHP pretreatment process with the dual goal of both cellulose utilization and lignin valorization.

Microplastics in the wastewater treatment plants (WWTPs): Occurrence and removal

WWTPs may be one of the important ways for MPs to enter surface water. In the present study, the influent and effluent from eleven WWTPs in Changzhou were collected and analyzed. At the same time, the abundance, size, color, and shape of MPs in influent and effluent were investigated. The average abundance of MPs in the influent and effluent were 196.00 ± 11.89 n/L and 9.04 ± 1.12 n/L respectively, and the MPs removal efficiency of eleven WWTPs was almost over 90% in which it could be up to 97.15%. MPs were divided into four particle size based on abundance changes, and the size of MPs with the highest abundant was mainly concentrated at 0.1-0.5 mm. Among these MPs, fibers were the main shape in wastewater, followed by fragments, flakes, spheres and films. The colors of MPs in wastewater were various and 14 types of plastics were detected from wastewater using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). Moreover, Rayon and PET were the dominant polymer types in eleven WWTPs. The research results provided basic data for the research and supervision of MPs pollution in WWTPs.

Assessment of microplastic pollution: occurrence and characterisation in Vesijärvi lake and Pikku Vesijärvi pond, Finland

In the last few years, several studies have investigated microplastics (MPs) in marine ecosystems, but data monitoring and assessing the occurrence in freshwater environments are still scarce. The present study aims to investigate the occurrence, distribution, and chemical composition of MP pollution in Vesijärvi lake and Pikku Vesijärvi pond close to the city of Lahti (Finland) in winter. Sediment, snow, and ice core samples were collected near the shore of these two aquatic systems. MPs were analysed and identified by a non-destructive method using Fourier transform infrared spectroscopy (FTIR) 2D imaging. The mean concentrations of MPs detected in sediment, snow, and ice samples were 395.5 ± 90.7 MPs/kg, 117.1 ± 18.4 MPs/L, and 7.8 ± 1.2 MPs/L, respectively. FTIR results showed the predominant abundance of microplastics, such as polyamides (up to 53.3%), polyethylene and polypropylene (up to 17.1%), and natural fragments such as cellulose (up to 45.8%) and wool (up 18.8%) in the same size range. The potential release of MPs arising from stormwaters and sport and recreational activities was evidenced.

Semi-automatic combustion of environmental and biological samples on Oxidizer M307 and equivalents: New solutions for background reduction

The aim is to introduce and characterize a new experimental demonstrative model contributing to the increase of measurement accuracy, in terms of minimum detectable activity (MDA) and background reduction, for the analysis of samples having low concentrations in tritium and radiocarbon on Quantulus 1220. The clue is related to the qualitative and quantitative differences between tritium and carbon-14 inventories of the pulp used to manufacture the cups involved in noncatalytic combustion of samples by flame oxidation method. The quality of the experimental results depends on the temporal origin of the wood from which the pulp/cellulose was extracted/purified, the specific inventory contributing to the threshold level of the MDA for the beta-emitting radionuclide to be investigated. Finally, the aim is to create and to use such a 100% old cellulose combustion cups for determining low concentrations of these radionuclides. It may be obtained by an adapted technology following the literature data and may be recommended for routine analyses of environmental samples coming from areas with no nuclear or minor nuclear influences, and also for low-level biological samples. This first attempt resulted in improvement of measurement performances up to 400% for carbon-14 and by approximately 50% for tritium.

Stable and novel QTL identification and new insights into the genetic networks affecting seed fiber traits in Brassica napus

QTL mapping for fiber-related traits and elucidation of a stable and novel QTL affecting seed lignin content, cellulose content and seed oil content. Dissection of the genetic networks for fiber biosynthesis is important for improving the seed oil content and meal value of Brassica napus. In this study, the genetic basis of seed fiber biosynthesis in B. napus was investigated via quantitative trait locus (QTL) analysis using a doubled haploid population derived from 'KenC-8' crossed with 'N53-2.' Seed lignin content (LC), cellulose content (CC) and hemicellulose content (HC) were significantly negatively correlated with seed oil content (OC). Co-localization QTLs among LC, CC, HC and OC on A09 were found with contributions ranging from 9.87 to 48.50%. Seven co-localization QTLs involved in the fiber component and OC were further verified by bulked segregant analysis (BSA). The unique QTL uqA9-12 might be a real and new QTL that was commonly identified by QTL mapping and BSA and simultaneously affected LC, CC and OC with opposite additive effects. A potential regulatory network controlling seed fiber biosynthesis was constructed to dissect the complex mechanism of seed fiber and oil accumulation, and numerous candidate genes were identified in the fiber-related QTL regions. These results provided an enrichment of QTLs and potential candidates for fiber biosynthesis, as well as useful new information for understanding the complex genetic mechanism underlying rapeseed seed fiber accumulation.

Evaluation of fungal degradation of wheat straw cell wall using different analytical methods from ruminant nutrition perspective

BACKGROUND

White rot fungi have been used to improve the nutritive value of lignocellulose for ruminants. In feed analysis, the Van Soest method is widely used to determine the cell wall contents. To assess the reliability of this method (Method A) for determination of cell wall contents in fungal-treated wheat straw, we compared a combined monosaccharide analysis and pyrolysis coupled to gas chromatography with mass spectrometry (Py-GC/MS) (Method B). Ruminal digestibility, measured as in vitro gas production (IVGP), was subsequently used to examine which method explains best the effect of fungal pretreatment on the digestibility of wheat straw.

RESULTS

Both methods differed considerably in the mass recoveries of the individual cell wall components, which changed on how we assess their degradation characteristics. For example, Method B gave a higher degradation of lignin (61.9%), as compared to Method A (33.2%). Method A, however, showed a better correlation of IVGP with the ratio of lignin to total structural carbohydrates, as compared to Method B (Pearson's r of -0.84 versus -0.69). Nevertheless, Method B provides a more accurate quantification of lignin, reflecting its actual modification and degradation. With the information on the lignin structural features, Method B presents a substantial advantage in understanding the underlying mechanisms of lignin breakdown. Both methods, however, could not accurately quantify the cellulose contents - among others, due to interference of fungal biomass.

CONCLUSION

Method A only accounts for the recalcitrant residue and therefore is more suitable for evaluating ruminal digestibility. Method B allows a more accurate quantification of cell wall, required to understand and better explains the actual modification of the cell wall. The suitability of both methods, therefore, depends on their intended purposes. © 2019 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.