Microarray analysis of microbial virulence factors

Molecular characterization of enterotoxin genes in methicillin-resistant S. aureus isolated from food poisoning outbreaks in Egypt

BACKGROUND

Staphylococcus aureus (S. aureus), especially methicillin-resistant S. aureus (MRSA), is a known disease-causing bacteria with many associated health hazards. Staphylococcal food poisoning can result from staphylococcal enterotoxins (SEs).

METHODS

In this study, 50 S. aureus isolates were isolated from the gastrointestinal tract (GIT) clinical samples of patients with food poisoning in clinical laboratories at Mansoura University Hospital, Egypt. For determination their antibiogram, these isolates were tested for antimicrobial sensitivity against 12 antimicrobial agents using the agar disk diffusion test. After DNA extraction from the isolates, conventional polymerase chain reaction (PCR) was used to detect mecA and SEs genes.

RESULTS

As a result, all isolates were ampicillin and cefoxitin-resistant, while 86% (43 of 50) of the tested isolates exhibited multidrug resistance (MDR). In contrast, the highest sensitivity was confirmed against vancomycin, linezolid and quinolones, namely ciprofloxacin and norfloxacin. Although 100% of the isolates were mecA positive, staphylococcal enterotoxin genes set-A, set-B, set-C, set-G, set-M, and set-O genes were detected in 56%, 20%, 8%, 32%, 16%, and 24%, of the tested isolates, respectively. Finally, isolates encompassing SEs genes were used to validate a microarray chip, indicating its potential for a better methodological approach for detecting and identifying SEs in human samples.

CONCLUSION

The genotypic findings of this study may help explain the enterotoxigenic patterns in S. aureus among Egyptian patients with food poisoning.

Molecular characterization of enterotoxin genes in methicillin-resistant S. aureus isolated from food poisoning outbreaks in Egypt

Background

Staphylococcus aureus (S. aureus), especially methicillin-resistant S. aureus (MRSA), is a known disease-causing bacteria with many associated health hazards. Staphylococcal food poisoning can result from staphylococcal enterotoxins (SEs).

Methods

In this study, 50 S. aureus isolates were isolated from the gastrointestinal tract (GIT) clinical samples of patients with food poisoning in clinical laboratories at Mansoura University Hospital, Egypt. For determination their antibiogram, these isolates were tested for antimicrobial sensitivity against 12 antimicrobial agents using the agar disk diffusion test. After DNA extraction from the isolates, conventional polymerase chain reaction (PCR) was used to detect mecA and SEs genes.

Results

As a result, all isolates were ampicillin and cefoxitin-resistant, while 86% (43 of 50) of the tested isolates exhibited multidrug resistance (MDR). In contrast, the highest sensitivity was confirmed against vancomycin, linezolid and quinolones, namely ciprofloxacin and norfloxacin. Although 100% of the isolates were mecA positive, staphylococcal enterotoxin genes set-A, set-B, set-C, set-G, set-M, and set-O genes were detected in 56%, 20%, 8%, 32%, 16%, and 24%, of the tested isolates, respectively. Finally, isolates encompassing SEs genes were used to validate a microarray chip, indicating its potential for a better methodological approach for detecting and identifying SEs in human samples.

Conclusion

The genotypic findings of this study may help explain the enterotoxigenic patterns in S. aureus among Egyptian patients with food poisoning.

Applied genomics for identification of virulent biothreats and for disease outbreak surveillance

Fortifying our preparedness to cope with biological threats by identifying and targeting virulence factors may be a preventative strategy for curtailing infectious disease outbreak. Virulence factors evoke successful pathogenic invasion, and the science and technology of genomics offers a way of identifying them, their agents and evolutionary ancestor. Genomics offers the possibility of deciphering if the release of a pathogen was intentional or natural by observing sequence and annotated data of the causative agent, and evidence of genetic engineering such as cloned vectors at restriction sites. However, to leverage and maximise the application of genomics to strengthen global interception system for real-time biothreat diagnostics, a complete genomic library of pathogenic and non-pathogenic agents will create a robust reference assembly that can be used to screen, characterise, track and trace new and existing strains. Encouraging ethical research sequencing pathogens found in animals and the environment, as well as creating a global space for collaboration will lead to effective global regulation and biosurveillance.

A Reusable Column Method Using Glycopolymer-Functionalized Resins for Capture-Detection of Proteins and Escherichia coli

The use of glycopolymer-functionalized resins (Resin-Glc), as a solid support, in column mode for bacterial/protein capture and quantification is explored. The Resin-Glc is synthesized from commercially available chloromethylated polystyrene resin and glycopolymer, and is characterized by fourier transform infrared spectroscopy, thermogravimetry, and elemental analysis. The percentage of glycopolymer functionalized on Resin-Glc is accounted to be 5 wt%. The ability of Resin-Glc to selectively capture lectin, Concanavalin A, over Peanut Agglutinin, reversibly, is demonstrated for six cycles of experiments. The bacterial sequestration study using SYBR (Synergy Brands, Inc.) Green I tagged Escherichia coli/Staphylococcus aureus reveals the ability of Resin-Glc to selectively capture E. coli over S. aureus. The quantification of captured cells in the column is carried out by enzymatic colorimetric assay using methylumbelliferyl glucuronide as the substrate. The E. coli capture studies reveal a consistent capture efficiency of 10⁵  CFU (Colony Forming Units) g^-1 over six cycles. Studies with spiked tap water samples show satisfactory results for E. coli cell densities ranging from 10² to 10⁷  CFU mL^-1 . The method portrayed can serve as a basis for the development of a reusable solid support in capture and detection of proteins and bacteria.

Technological Advances in Phytopathogen Detection and Metagenome Profiling Techniques

The use of advanced molecular methods in plant pathology and applied microbiology has necessitated for more accurate, rapid detection and identification of plant pathogens. This is particularly significant given accelerated emergence of virulence that leads to increased prevalence of plant pathogens. Thus, the capacity to contain plant pathogens and ultimately disease progression is key to ensuring crop biosecurity and overall food security. Of recent, research on pathogens utilizes a holistic approach focusing on elucidating growth dynamics within the entire biome rather than studying individual or closely related isolates in unison. This has advanced knowledge and information of microbial ecosystem within natural environments in the twenty first century. Applied technological platforms used for rapid detection and profiling microbial biomes in this regard include digital PCR, pyrosequencing, Illumina, DNA microarray and barcoding, Ion torrent, and nanopore. These technologies have been applied in various fields including human health and medicine, marine and animal biology, crop production and water quality research, to mention but a few. Although much has been done and achieved through the development of several technologies, more accuracy is required to circumvent the shortfalls still experienced. This includes integrating existing methods with new applications such as viability PCRs and microbial viability testing. Hence, this review provides critical analysis of some widely used latest technologies in rapid detection and identification of plant pathogens, and profiling plant associated microbiomes that reveal growth dynamics and population diversity. The advantages and limitations of the technologies are also discussed.

Bioaerosol sampling and detection methods based on molecular approaches: No pain no gain

Bioaerosols are among the less studied particles in the environment. The lack of standardization in sampling procedures, difficulties related to the effect of sampling processes on the integrity of microorganisms, and challenges associated with the application of environmental microbiology analyses and molecular and culture methods frighten many young scientists. Every microorganism has its own particularities and acts differently when aerosolized in various conditions. Because the air is an extremely biologically diluted environment, it is necessary to concentrate its content before any analysis is performed. Challenges faced when applying molecular methods to air samples reveal the need for a better standardization of approaches for cell and nucleic acid recovery, the choice of genetic markers, and interpretation of data. This paper presents a few of the limits and difficulties tackled when molecular methods are applied to bioaerosols, suggests some improvements by specifying the critical stages that should be considered when studying the microbial ecology of bioaerosols, and provides thoughtful insights on how to overcome the challenges encountered.

Uropathogenic Escherichia coli virulence genes: invaluable approaches for designing DNA microarray probes

Introduction

The pathotypes of uropathogenic Escherichia coli (UPEC) cause different types of urinary tract infections (UTIs). The presence of a wide range of virulence genes in UPEC enables us to design appropriate DNA microarray probes. These probes, which are used in DNA microarray technology, provide us with an accurate and rapid diagnosis and definitive treatment in association with UTIs caused by UPEC pathotypes. The main goal of this article is to introduce the UPEC virulence genes as invaluable approaches for designing DNA microarray probes.

Material and methods

Main search engines such as Google Scholar and databases like NCBI were searched to find and study several original pieces of literature, review articles, and DNA gene sequences. In parallel with in silico studies, the experiences of the authors were helpful for selecting appropriate sources and writing this review article.

Results

There is a significant variety of virulence genes among UPEC strains. The DNA sequences of virulence genes are fabulous patterns for designing microarray probes. The location of virulence genes and their sequence lengths influence the quality of probes.

Conclusions

The use of selected virulence genes for designing microarray probes gives us a wide range of choices from which the best probe candidates can be chosen. DNA microarray technology provides us with an accurate, rapid, cost-effective, sensitive, and specific molecular diagnostic method which is facilitated by designing microarray probes. Via these tools, we are able to have an accurate diagnosis and a definitive treatment regarding UTIs caused by UPEC pathotypes.

Single-stranded DNA catalyzes hybridization of PCR-products to microarray capture probes

Since its development, microarray technology has evolved to a standard method in the biotechnological and medical field with a broad range of applications. Nevertheless, the underlying mechanism of the hybridization process of PCR-products to microarray capture probes is still not completely understood, and several observed phenomena cannot be explained with current models. We investigated the influence of several parameters on the hybridization reaction and identified ssDNA to play a major role in the process. An increase of the ssDNA content in a hybridization reaction strongly enhanced resulting signal intensities. A strong influence could also be observed when unlabeled ssDNA was added to the hybridization reaction. A reduction of the ssDNA content resulted in a massive decrease of the hybridization efficiency. According to these data, we developed a novel model for the hybridization mechanism. This model is based on the assumption that single stranded DNA is necessary as catalyst to induce the hybridization of dsDNA. The developed hybridization model is capable of giving explanations for several yet unresolved questions regarding the functionality of microarrays. Our findings not only deepen the understanding of the hybridization process, but also have immediate practical use in data interpretation and the development of new microarrays.

Prevalence, intensity and complications of Microsporidium spores amongst HIV-positive hospital patients in Ilorin, Nigeria

BACKGROUND

Microsporidiasis, which is of great concern for immunocompromised patients, is poorly studied in developing countries.

OBJECTIVES

A study was carried out amongst HIV-positive hospital patients and HIV-negative hospital controls in Ilorin, Nigeria, between January 2009 and July 2010 to determine the prevalence and intensity of Microsporidium spores and the complications associated with their presence.

METHOD

Stool samples from 750 HIV-positive patients and 375 HIV-negative patients were studied using the Chromotrope-2R staining technique. Determination of CD4+ count was performed on the Partec Cyflow SL-3 CD4/8 instrument. Intensity of spores was determined by counting the total number of the spores in a 10 µl stained smear of stool. Images were captured with Phenix Microimage Analysis Software and data obtained were analysed using the Statistical Package for the Social Sciences.

RESULTS

The prevalence of Microsporidium isolates amongst the HIV-positive hospital patients was significantly higher (42.4%) than amongst the HIV-negative controls (19.2%) (p < 0.05). The intensity of microsporidial spores amongst HIV-positive hospital patients was also significantly higher than amongst the controls (p < 0.05). However, the difference in the intensity of spores amongst HIV-positive patients who were on antiretroviral therapy (n = 411) and those who were not (n = 339) was not significant (p = 0.236). Microsporidiasis in HIV infection infection was common amongst patients with with low CD4+ counts, diarrhoea, body rashes and cough.

CONCLUSION

Both the prevalence and intensity of Microsporidiasis are high amongst HIV-positive hospital patients; campaigns to promote awareness, prevention and control are required. Laboratory testing for microsporidia in HIV patients should be performed routinely so as to identify the organism for prompt medical attention.

Pathotyping bla CTX-M Escherichia coli from Nigeria

BACKGROUND

Escherichia coli have become the enterobacteriaceae species most affected by extended-spectrum β-lactamases (ESBLs) in view of the emergence of CTX-M-type ESBLs. These CTX-M-positive E. coli have been reported in numerous regions worldwide. Virulence determinants of already reported CTX-M-positive E. coli were investigated.

METHODOLOGY

To gain insights into the mechanism underlying this phenomenon, we assessed serogroup, susceptibility pattern and diversity of virulence profiles within a collection of nine bla CTX-M-positive E. coli strains and their virulent determinant using miniaturized DNA microarray techniques. The nine ESBL-positive E. coli isolates were from eight male and one female patient(s) selected for study based on previous work. Virulence potential was inferred by detection of 63 virulence factor (VF) genes.

RESULTS

Four (44.4%) of the 9 E. coli isolates exhibited the same set of core characteristics: serotype O8:Hnt, while all were positive for OXA-1, ciprofloxacin resistance. Five of the isolates exhibited highly similar (91% to 100%) VF profiles.

CONCLUSION

The findings describe a broadly disseminated, bla CTX-M-positive and virulent E. coli serogroup with highly homogeneous virulence genotypes, suggesting recent emergence in this zone. Understanding how this clone has emerged and successfully disseminated within the hospital and community, including across national boundaries, should be a public health priority.

Development of a real-time resistance measurement for Vibrio parahaemolyticus detection by the lecithin-dependent hemolysin gene

The marine bacterium Vibrio parahaemolyticus (V. parahaemolyticus) causes gastroenteritis in humans via the ingestion of raw or undercooked contaminated seafood, and early diagnosis and prompt treatment are important for the prevention of V. parahaemolyticus-related diseases. In this study, a real-time resistance measurement based on loop-mediated isothermal amplification (LAMP), electrochemical ion bonding (Crystal violet and Mg²⁺), real-time monitoring, and derivative analysis was developed. V. parahaemolyticus DNA was first amplified by LAMP, and the products (DNA and pyrophosphate) represented two types of negative ions that could combine with a positive dye (Crystal violet) and positive ions (Mg²⁺) to increase the resistance of the reaction liquid. This resistance was measured in real-time using a specially designed resistance electrode, thus permitting the quantitative detection of V. parahaemolyticus. The results were obtained in 1–2 hours, with a minimum bacterial density of 10 CFU.mL⁻¹ and high levels of accuracy (97%), sensitivity (96.08%), and specificity (97.96%) when compared to cultivation methods. Therefore, this simple and rapid method has a potential application in the detection of V. parahaemolyticus on a gene chip or in point-of-care testing.

A New Generation Microarray for the Simultaneous Detection and Identification of Yersinia pestis and Bacillus anthracis in Food

The use of microarrays as a multiple analytic system has generated increased interest and provided a powerful analytical tool for the simultaneous detection of pathogens in a single experiment. A wide array of applications for this technology has been reported. A low density oligonucleotide microarray was generated from the genetic sequences of Y. pestis and B. anthracis and used to fabricate a microarray chip. The new generation chip, consisting of 2,240 spots in 4 quadrants with the capability of stripping/rehybridization, was designated as “Y-PESTIS/B-ANTHRACIS 4x2K Array.” The chip was tested for specificity using DNA from a panel of bacteria that may be potentially present in food. In all, 37 unique Y. pestis-specific and 83 B. anthracis-specific probes were identified. The microarray assay distinguished Y. pestis and B. anthracis from the other bacterial species tested and correctly identified the Y. pestis-specific oligonucleotide probes using DNA extracted from experimentally inoculated milk samples. Using a whole genome amplification method, the assay was able to detect as low as 1 ng genomic DNA as the start sample. The results suggest that oligonucleotide microarray can specifically detect and identify Y. pestis and B. anthracis and may be a potentially useful diagnostic tool for detecting and confirming the organisms in food during a bioterrorism event.

Modular microfluidic system fabricated in thermoplastics for the strain-specific detection of bacterial pathogens

The recent outbreaks of a lethal E. coli strain in Germany have aroused renewed interest in developing rapid, specific and accurate systems for detecting and characterizing bacterial pathogens in suspected contaminated food and/or water supplies. To address this need, we have designed, fabricated and tested an integrated modular-based microfluidic system and the accompanying assay for the strain-specific identification of bacterial pathogens. The system can carry out the entire molecular processing pipeline in a single disposable fluidic cartridge and detect single nucleotide variations in selected genes to allow for the identification of the bacterial species, even its strain with high specificity. The unique aspect of this fluidic cartridge is its modular format with task-specific modules interconnected to a fluidic motherboard to permit the selection of the target material. In addition, to minimize the amount of finishing steps for assembling the fluidic cartridge, many of the functional components were produced during the polymer molding step used to create the fluidic network. The operation of the cartridge was provided by electronic, mechanical, optical and hydraulic controls located off-chip and packaged into a small footprint instrument (1 ft(3)). The fluidic cartridge was capable of performing cell enrichment, cell lysis, solid-phase extraction (SPE) of genomic DNA, continuous flow (CF) PCR, CF ligase detection reaction (LDR) and universal DNA array readout. The cartridge was comprised of modules situated on a fluidic motherboard; the motherboard was made from polycarbonate, PC, and used for cell lysis, SPE, CF PCR and CF LDR. The modules were task-specific units and performed universal zip-code array readout or affinity enrichment of the target cells with both made from poly(methylmethacrylate), PMMA. Two genes, uidA and sipB/C, were used to discriminate between E. coli and Salmonella, and evaluated as a model system. Results showed that the fluidic system could successfully identify bacteria in <40 min with minimal operator intervention and perform strain identification, even from a mixed population with the target of a minority. We further demonstrated the ability to analyze the E. coli O157:H7 strain from a waste-water sample using enrichment followed by genotyping.

Multipurpose instantaneous microarray detection of acute encephalitis causing viruses and their expression profiles

Detection of multiple viruses is important for global analysis of gene or protein content and expression, opening up new prospects in terms of molecular and physiological systems for pathogenic diagnosis. Early diagnosis is crucial for disease treatment and control as it reduces inappropriate use of antiviral therapy and focuses surveillance activity. This requires the ability to detect and accurately diagnose infection at or close to the source/outbreak with minimum delay and the need for specific, accessible point-of-care diagnosis able to distinguish causative viruses and their subtypes. None of the available viral diagnostic assays combine a point-of-care format with the complex capability to identify a large range of human and animal viruses. Microarray detection provides a useful, labor-saving tool for detection of multiple viruses with several advantages, such as convenience and prevention of cross-contamination of polymerase chain reaction (PCR) products, which is of foremost importance in such applications. Recently, real-time PCR assays with the ability to confirm the amplification product and quantitate the target concentration have been developed. Furthermore, nucleotide sequence analysis of amplification products has facilitated epidemiological studies of infectious disease outbreaks and monitoring of treatment outcomes for infections, in particular for viruses that mutate at high frequency. This review discusses applications of microarray technology as a potential new tool for detection and identification of acute encephalitis-causing viruses in human serum, plasma, and cell cultures.

O-antigen and virulence profiling of shiga toxin-producing Escherichia coli by a rapid and cost-effective DNA microarray colorimetric method

Shiga toxin-producing Escherichia coli (STEC) is a leading cause of foodborne illness worldwide. The present study developed the use of DNA microarrays with the ampliPHOX colorimetric method to rapidly detect and genotype STEC strains. A low-density 30-mer oligonucleotide DNA microarray was designed to target O-antigen gene clusters of 11 E. coli serogroups (O26, O45, O91, O103, O104, O111, O113, O121, O128, O145, and O157) that have been associated with the majority of STEC infections. In addition, the DNA microarray targeted 11 virulence genes, encoding adhesins, cytotoxins, proteases, and receptor proteins, which have been implicated in conferring increased ability to cause disease for STEC. Results from the validation experiments demonstrated that this microarray-based colorimetric method allowed for a rapid and accurate genotyping of STEC reference strains from environmental and clinical sources and from distinct geographical locations. Positive hybridization signals were detected only for probes targeting serotype and virulence genes known to be present in the STEC reference strains. Quantification analysis indicated that the mean pixel intensities of the signal for probes targeting O-antigen or virulence genes were at least three times higher when compared to the background. Furthermore, this microarray-based colorimetric method was then employed to genotype a group of E. coli isolates from watershed sediment and animal fecal samples that were collected from an important region for leafy-vegetable production in the central coast of California. The results indicated an accurate identification of O-type and virulence genes in the tested isolates and confirmed that the ampliPHOX colorimetric method with low-density DNA microarrays enabled a fast assessment of the virulence potential of STEC using low-cost reagents and instrumentation.

Bacterial identification and subtyping using DNA microarray and DNA sequencing

The era of fast and accurate discovery of biological sequence motifs in prokaryotic and eukaryotic cells is here. The co-evolution of direct genome sequencing and DNA microarray strategies not only will identify, isotype, and serotype pathogenic bacteria, but also it will aid in the discovery of new gene functions by detecting gene expressions in different diseases and environmental conditions. Microarray bacterial identification has made great advances in working with pure and mixed bacterial samples. The technological advances have moved beyond bacterial gene expression to include bacterial identification and isotyping. Application of new tools such as mid-infrared chemical imaging improves detection of hybridization in DNA microarrays. The research in this field is promising and future work will reveal the potential of infrared technology in bacterial identification. On the other hand, DNA sequencing by using 454 pyrosequencing is so cost effective that the promise of $1,000 per bacterial genome sequence is becoming a reality. Pyrosequencing technology is a simple to use technique that can produce accurate and quantitative analysis of DNA sequences with a great speed. The deposition of massive amounts of bacterial genomic information in databanks is creating fingerprint phylogenetic analysis that will ultimately replace several technologies such as Pulsed Field Gel Electrophoresis. In this chapter, we will review (1) the use of DNA microarray using fluorescence and infrared imaging detection for identification of pathogenic bacteria, and (2) use of pyrosequencing in DNA cluster analysis to fingerprint bacterial phylogenetic trees.

Genome-wide transcriptome analysis of fluoroquinolone resistance in clinical isolates of Escherichia coli

OBJECTIVES

Coincident with their worldwide use, resistance to fluoroquinolones in Escherichia coli has increased. To identify the gene expression profiles underlying fluoroquinolone resistance, we carried out genome-wide transcriptome analysis of fluoroquinolone-sensitive E. coli.

METHODS

Four fluoroquinolone-sensitive E. coli and five fluoroquinolone-resistant E. coli clinical isolates were subjected to complementary deoxyribonucleic acid microarray analysis. Some upregulated genes' expression was verified by real-time polymerase chain reaction using 104 E. coli clinical isolates, and minimum inhibitory concentration tests were carried out by using their transformants.

RESULTS

A total of 40 genes were significantly upregulated in fluoroquinolone-resistant E. coli isolates (P < 0.05). The expression of phage shock protein operons, which are involved in biofilm formation, was markedly upregulated in our profile of fluoroquinolone-resistant E. coli. One of the phage shock protein operons, pspC, was significantly upregulated in 50 fluoroquinolone-resistant E. coli isolates (P < 0.0001). The expression of type I fimbriae genes, which are pilus operons involved in biofilm formation, were markedly downregulated in fluoroquinolone-resistant E. coli. Deoxyribonucleic acid adenine methyltransferase (dam), which represses type I fimbriae genes, was significantly upregulated in the clinical fluoroquinolone-resistant E. coli isolates (P = 0.007). We established pspC- and dam-expressing E. coli transformants from fluoroquinolone-sensitive E. coli, and the minimum inhibitory concentration tests showed that the transformants acquired fluoroquinolone resistance, suggesting that upregulation of these genes contributes to acquiring fluoroquinolone resistance.

CONCLUSIONS

Upregulation of psp operones and dam underlying pilus operons downregulation might be associated with fluoroquinolone resistance in E. coli.

Multiparametric determination of genes and their point mutations for identification of beta-lactamases

More than half of all currently used antibiotics belong to the beta-lactam group, but their clinical effectiveness is severely limited by antibiotic resistance of microorganisms that are the causative agents of infectious diseases. Several mechanisms for the resistance of Enterobacteriaceae have been established, but the main one is the enzymatic hydrolysis of the antibiotic by specific enzymes called beta-lactamases. Beta-lactamases represent a large group of genetically and functionally different enzymes of which extended-spectrum beta-lactamases (ESBLs) pose the greatest threat. Due to the plasmid localization of the encoded genes, the distribution of these enzymes among the pathogens increases every year. Among ESBLs the most widespread and clinically relevant are class A ESBLs of TEM, SHV, and CTX-M types. TEM and SHV type ESBLs are derived from penicillinases TEM-1, TEM-2, and SHV-1 and are characterized by several single amino acid substitutions. The extended spectrum of substrate specificity for CTX-M beta-lactamases is also associated with the emergence of single mutations in the coding genes. The present review describes various molecular-biological methods used to identify determinants of antibiotic resistance. Particular attention is given to the method of hybridization analysis on microarrays, which allows simultaneous multiparametric determination of many genes and point mutations in them. A separate chapter deals with the use of hybridization analysis on microarrays for genotyping of the major clinically significant ESBLs. Specificity of mutation detection by means of hybridization analysis with different detection techniques is compared.

Detection and identification of Vibrio parahaemolyticus by multiplex PCR and DNA-DNA hybridization on a microarray

In this paper, we developed a rapid and accurate method for the detection of Vibrio parahaemolyticus strains, using multiplex PCR and DNA-DNA hybridization. Multiplex PCR was used to simultaneously amplify three diagnostic genes (tlh, tdh and fla) that serve as molecular markers of V. parahaemolyticus. Biotinylated PCR products were hybridized to primers immobilized on a microarray, and detected by chemiluminesce with avidin-conjugated alkaline phosphatase. With this method, forty-five samples were tested. Eight known virulent strains (tlh(+)/tdh(+)/fla(+)) and four known avirulent strains (tlh(+)/tdh(-)/fla(+)) of the V. parahaemolyticus were successfully detected, and no non-specific hybridization and cross-hybridization reaction were found from fifteen closely-related strains (tlh(-)/tdh(-)/fla(+)) of the Vibrio spp. In addition, all the other eighteen strains of non-Vibrio bacteria (tlh(-)/tdh(-)/fla(-)) gave negative results. The DNA microarray successfully distinguished V. parahaemolyticus from other Vibrio spp. The results demonstrated that this was an efficient and robust method for identifying virulent strains of V. parahaemolyticus.

16S rRNA gene microarray analysis of microbial communities in ethanol-stimulated subsurface sediment

A high-density 16S rRNA gene microarray was used to analyze microbial communities in a slurry of ethanol-amended, uranium-contaminated subsurface sediment. Of specific interest was the extent to which the microarray could detect temporal patterns in the relative abundance of major metabolic groups (nitrate-reducing, metal-reducing, sulfate-reducing, and methanogenic taxa) that were stimulated by ethanol addition. The results show that the microarray, when used in conjunction with geochemical data and knowledge of the physiological properties of relevant taxa, provided accurate assessment of the response of key functional groups to biostimulation.

Oligonucleotide microarrays for identification of microbial pathogens and detection of their virulence-associated or drug-resistance determinants

Microarrays are spatially ordered arrays with ligands chemically immobilized in discrete spots on a solid matrix, usually a microscope slide. Microarrays are a high-throughput large-scale screening system enabling simultaneous identification of a large number of labeled target molecules (up to several hundred thousand) that bind specifically to the immobilized ligands of the array. DNA microarrays represent a promising tool for clinical, environmental, and industrial microbiology since the technology allows relatively rapid identification of large number of genetic determinants simultaneously, providing detailed genomic level information regarding the pathogen species, including identification of their virulence-associated factors and the presence of antibiotic resistance genes. In this chapter, we describe key aspects and methodologies important for the development and use of DNA microarrays for microbial diagnostics.

High-throughput biosensors for multiplexed food-borne pathogen detection

Incidental contamination of foods by pathogenic bacteria and/or their toxins is a serious threat to public health and the global economy. The presence of food-borne pathogens and toxins must be rapidly determined at various stages of food production, processing, and distribution. Producers, processors, regulators, retailers, and public health professionals need simple and cost-effective methods to detect different species or serotypes of bacteria and associated toxins in large numbers of food samples. This review addresses the desire to replace traditional microbiological plate culture with more timely and less cumbersome rapid, biosensor-based methods. Emphasis focuses on high-throughput, multiplexed techniques that allow for simultaneous testing of numerous samples, in rapid succession, for multiple food-borne analytes (primarily pathogenic bacteria and/or toxins).

Detection of representative enteropathogenic bacteria, Vibrio spp., pathogenic Escherichia coli, Salmonella spp., Shigella spp., and Yersinia enterocolitica, using a virulence factor gene-based oligonucleotide microarray

Rapid identification of enteropathogenic bacteria in stool samples is critical for clinical diagnosis and antimicrobial therapy. In this study, we describe the development of an approach that couples multiplex PCR with hybridization to a DNA microarray, to allow the simultaneous detection of the 10 pathogens. The microarray was synthesized with 20-mer oligonucleotide probes that were designed to be specific for virulence-factor genes of each strain. The detection limit for genomic DNA from a single strain was approximately 10 fg. In the presence of heterogeneous non-target DNA, the detection sensitivity of the array decreased to approximately 100 fg. We did not observe any non-specific hybridization. In addition, we successfully used this oligonucleotide-based DNA microarray to identify the causative agents in clinical stool samples from patients with food-borne enteritis.

An FDA bioinformatics tool for microbial genomics research on molecular characterization of bacterial foodborne pathogens using microarrays

Background

Advances in microbial genomics and bioinformatics are offering greater insights into the emergence and spread of foodborne pathogens in outbreak scenarios. The Food and Drug Administration (FDA) has developed a genomics tool, ArrayTrack^TM, which provides extensive functionalities to manage, analyze, and interpret genomic data for mammalian species. ArrayTrack^TM has been widely adopted by the research community and used for pharmacogenomics data review in the FDA’s Voluntary Genomics Data Submission program.

Results

ArrayTrack^TM has been extended to manage and analyze genomics data from bacterial pathogens of human, animal, and food origin. It was populated with bioinformatics data from public databases such as NCBI, Swiss-Prot, KEGG Pathway, and Gene Ontology to facilitate pathogen detection and characterization. ArrayTrack^TM’s data processing and visualization tools were enhanced with analysis capabilities designed specifically for microbial genomics including flag-based hierarchical clustering analysis (HCA), flag concordance heat maps, and mixed scatter plots. These specific functionalities were evaluated on data generated from a custom Affymetrix array (FDA-ECSG) previously developed within the FDA. The FDA-ECSG array represents 32 complete genomes of Escherichia coli and Shigella. The new functions were also used to analyze microarray data focusing on antimicrobial resistance genes from Salmonella isolates in a poultry production environment using a universal antimicrobial resistance microarray developed by the United States Department of Agriculture (USDA).

Conclusion

The application of ArrayTrack^TM to different microarray platforms demonstrates its utility in microbial genomics research, and thus will improve the capabilities of the FDA to rapidly identify foodborne bacteria and their genetic traits (e.g., antimicrobial resistance, virulence, etc.) during outbreak investigations. ArrayTrack^TM is free to use and available to public, private, and academic researchers at http://www.fda.gov/ArrayTrack.

Rapid detection of respiratory tract viral infections and coinfections in patients with influenza-like illnesses by use of reverse transcription-PCR DNA microarray systems

We prospectively tested 95 nasal swabs or nasopharyngeal aspirates taken from 56 adults and 39 children visiting the Reims University Medical Centre (northern France) for influenza-like illnesses (ILI) during the early stage of the French influenza A/H1N1v pandemic (October 2009). Respiratory samples were tested using a combination of two commercially available reverse transcription-PCR (RT-PCR) DNA microarray systems allowing rapid detection of influenza A virus strains, including the new A/H1N1v strain as well as 20 other common or newly discovered respiratory viruses. Concomitantly, a generic and classical real-time RT-PCR assay was performed to detect all circulating influenza A virus strains in the same samples. Of the 95 respiratory samples tested, 30 (31%) were positive for the detection of influenza A/H1N1v virus infection by both RT-PCR DNA microarray and classical real-time RT-PCR detection assays. Among the infections, 25 (83%) were monoinfections, whereas 5 (17%) were multiple infections associating influenza A/H1N1v virus with coronavirus (CoV), human bocavirus (HBoV), respiratory syncytial virus (RSV), or human rhinoviruses (HRVs). Of the 95 respiratory samples tested, 35 (37%) were positive for respiratory viruses other than influenza A/H1N1v virus. Among these infections, we observed 30 monoinfections (HRVs [63%], parainfluenza viruses [PIVs] [20%]), influenza A/H3N2 virus [6%], coronavirus [4%], and HBoV [4%]) and 5 multiple infections, in which HRVs and PIVs were the most frequently detected viruses. No specific single or mixed viral infections appeared to be associated significantly with secondary hospitalization in infectious disease or intensive care departments during the study period (P > 0.5). The use of RT-PCR DNA microarray systems in clinical virology practice allows the rapid and accurate detection of conventional and newly discovered viral respiratory pathogens in patients suffering from ILI and therefore could be of major interest for development of new epidemiological survey systems for respiratory viral infections.

Bacterial capture by peptide-mimetic oligoacyllysine surfaces

Most procedures for detecting pathogens in liquid media require an initial concentration step. However, poor recovery efficiencies of conventional methods, such as filtration, often lead to low sensitivity. Here, we describe a strategy for concentrating bacteria using their binding affinity for an oligoacyllysine (OAK), a novel peptide-mimetic antimicrobial compound. We show that the resin-linked OAK (ROAK) efficiently captures a variety of pathogens in different media, upon brief incubation with ROAK beads or after continuous flow through a ROAK-packed column. Using Escherichia coli expressing green fluorescent protein, we show that binding occurs rapidly during incubation and persists after filtration as visualized by confocal microscopy. The high binding affinity of bacteria was confirmed by surface plasmon resonance technology using an OAK-linked chip. ROAK-bound bacteria remained viable and were readily identifiable by real-time PCR after ethanol elution. A single ROAK bead is estimated to capture about 3,000 bacterial cells in culture medium, in contaminated saline or tap water. ROAK beads can be regenerated for multiple uses after brief ethanol treatment. Collectively, the data support the notion that OAK-based coating of polymeric surfaces might represent a useful means for medium filtration as well as for concentration of bacteria.

Development and evaluation of oligonucleotide chip based on the 16S-23S rRNA gene spacer region for detection of pathogenic microorganisms associated with sepsis

Oligonucleotide chips targeting the bacterial internal transcribed spacer region (ITS) of the 16S-23S rRNA gene, which contains genus- and species-specific regions, were developed and evaluated. Forty-three sequences were designed consisting of 1 universal, 3 Gram stain-specific, 9 genus-specific, and 30 species-specific probes. The specificity of the probes was confirmed using bacterial type strains including 54 of 52 species belonging to 18 genera. The performance of the probes was evaluated using 825 consecutive samples that were positive by blood culture in broth medium. Among the 825 clinical specimens, 708 (85.8%) were identified correctly by the oligonucleotide chip. Most (536 isolates, or 75.7%) were identified as staphylococci, Escherichia coli, or Klebsiella pneumoniae. Thirty-seven isolates (4.5%) did not bind to the corresponding specific probes. Most of these also were staphylococci, E. coli, or K. pneumoniae and accounted for 6.3% of total number of the species. Sixty-two specimens (7.5%) did not bind the genus- or species-specific probes because of lack of corresponding specific probes. Among them, Acinetobacter baumannii was the single most frequent isolate (26/62). The oligonucleotide chip was highly specific and sensitive in detecting the causative agents of bacteremia directly from positive blood cultures.

Species-specific PCR detection of the food-borne pathogen Vibrio parahaemolyticus using the irgB gene identified by comparative genomic analysis

Vibrio parahaemolyticus is an enteric pathogen, which can cause acute gastroenteritis in humans after consumption of raw or partially cooked seafood, and specific molecular markers are necessary for its accurate identification by PCR methods. In the present study, 23 protein-coding sequences were identified by the comparative genomics method as V. parahaemolyticus-specific candidate markers. We targeted the irgB gene (vp2603), coding for iron-regulated virulence regulatory protein IrgB, in order to develop a PCR method for the detection of V. parahaemolyticus. PCR specificity was identified by amplification of 293 V. parahaemolyticus templates and by the loss of a PCR product with 11 strains from other Vibrio species and 35 non-Vibrio bacterial strains. The PCR assay had the 369-bp fragment and the sensitivity of 0.17 pg purified genomic DNA from V. parahaemolyticus. Furthermore, a multiplex PCR assay for the detection of total and virulent strains of V. parahaemolyticus was developed by targeting irgB, tdh and trh genes. These data indicated that the irgB gene is a new and effective marker for the detection of V. parahaemolyticus. In addition, this study demonstrates that genome sequence comparison has a powerful application in identifying specific markers for the detection and identification of bacterial pathogens.

Basic concepts of microarrays and potential applications in clinical microbiology

The introduction of in vitro nucleic acid amplification techniques, led by real-time PCR, into the clinical microbiology laboratory has transformed the laboratory detection of viruses and select bacterial pathogens. However, the progression of the molecular diagnostic revolution currently relies on the ability to efficiently and accurately offer multiplex detection and characterization for a variety of infectious disease pathogens. Microarray analysis has the capability to offer robust multiplex detection but has just started to enter the diagnostic microbiology laboratory. Multiple microarray platforms exist, including printed double-stranded DNA and oligonucleotide arrays, in situ-synthesized arrays, high-density bead arrays, electronic microarrays, and suspension bead arrays. One aim of this paper is to review microarray technology, highlighting technical differences between them and each platform's advantages and disadvantages. Although the use of microarrays to generate gene expression data has become routine, applications pertinent to clinical microbiology continue to rapidly expand. This review highlights uses of microarray technology that impact diagnostic microbiology, including the detection and identification of pathogens, determination of antimicrobial resistance, epidemiological strain typing, and analysis of microbial infections using host genomic expression and polymorphism profiles.

Development of a novel DNA microarray to detect bacterial pathogens in patients with chronic obstructive pulmonary disease (COPD)

A novel microarray was constructed with DNA PCR product probes targeting species specific functional genes of nine clinically significant respiratory pathogens, including the Gram-positive organisms (Streptococcus pneumoniae, Streptococcus pyogenes), the Gram-negative organisms (Chlamydia pneumoniae, Coxiella burnetii Haemophilus spp., Legionella pneumophila, Moraxella catarrhalis, and Pseudomonas aeruginosa), as well as the atypical bacterium, Mycoplasma pneumoniae. In a “proof-of-concept” evaluation of the developed microarray, the microarray was compared with real-time PCR from 14 sputum specimens from COPD patients. All of the samples positive for bacterial species in real-time PCR were also positive for the same bacterial species using the microarray. This study shows that a microarray using PCR probes is a potentially useful method to monitor the populations of bacteria in respiratory specimens and can be tailored to specific clinical needs such as respiratory infections of particular patient populations, including patients with cystic fibrosis and bronchiectasis.

DNA microarray-based identification and typing of Actinobacillus pleuropneumoniae

A DNA microarray system was prepared and shown to facilitate identification and typing of Actinobacillus pleuropneumoniae. The DNA microarray, composed of 18 DNA polymerase chain reaction (PCR) amplicons printed on glass slides and arranged in 3 subarrays, was developed. These target DNA included 1 or multiple fragments of the outer membrane lipoprotein, apx toxin, capsular polysaccharide, and disulfide bound formation protein E (dsbE)-like genes of A. pleuropneumoniae. These arrayed target DNA retained their expected hybridization properties. The hybridization signal intensities ranged from the least-intense to the most-intense, 4626 to 9789 arbitrary fluorescence units, respectively. Cy3-probes of A. pleuropneumoniae strains labeled with multiplex PCR were hybridized to the DNA microarray. A total of 51 different A. pleuropneumoniae strains representing serotype 1 to 12 reference strains and clinical isolates were detected and typed by the DNA microarray. Twelve reference serotypes produced 11 distinct target DNA hybridization patterns, and hybridization patterns of serotypes 1 (n = 7), 3 (n = 5), and 7 (n = 6) field isolates were identical to hybridization patterns of reference serotypes 1, 3, and 7, respectively. Non-serotyped isolates 4, 6, and 11 (out of 21) from diseased pigs had identical hybridization patterns to reference serotypes 3, 7, and 1, respectively. The results show that the DNA microarray system described in the present study is a valuable tool for identifying and typing reference strains and isolates of A. pleuropneumoniae, and enables relatively rapid identification of non-serotyped isolates.

Detection of Yersinia enterocolitica in alfalfa, mung bean, cilantro, and mamey sapote (Pouteria sapota) food matrices using DNA microarray chip hybridization

Four different food matrices (alfalfa, cilantro, mamey sapote, and mung bean) were contaminated with three different dilutions 10(6), 10(4), and 10(3) cfu/g of Yersinia enterocolitica. DNA was isolated from each food mix and used in chromosomal amplifications. The amplified DNA was used as templates in single PCR reactions of the four genes (virF, ail, yst, and blaA) followed by mixing the four reactions for one PCR primer extension reaction. The presence and the limit of detection of four genes in four food matrices were established by microarray hybridization. Data revealed the diversity of signal intensities. Neither the microarray chip hybridization nor the single PCR amplification could detect virF's presence located on a plasmid. Ail was detected in 10(3) cfu/g, whereas blaA and yst were detected from 10(5) to 10(6) cfu/g in all food matrices. Therefore, the ail gene could be the gene of choice in identifying Y. enterocolitica in alfalfa, cilantro, mamey, and mung bean. Other genes--blaA, yst, virF--exhibited wide variability in hybridization signals, highlighting the need of a better DNA purification step prior to DNA microarray hybridization.

Discrimination between biothreat agents and 'near neighbor' species using a resequencing array

Timely identification of biothreat organisms from large numbers of clinical or environmental samples in potential outbreak or attack scenario is critical for effective diagnosis and treatment. This study aims to evaluate the potential of resequencing arrays for this purpose. Albeit suboptimal, this report demonstrated that respiratory pathogen microarray version 1 can identify Bacillus anthracis, Francisella tularensis, Yersinia pestis and distinguish them from benign 'near neighbor' species in a single assay. Additionally, the sequence information can discriminate strains and possibly the sources of the strains. With further development, it is possible to use resequencing microarrays for biothreat surveillance.

Rapid DNA amplification using a battery-powered thin-film resistive thermocycler

A prototype handheld, compact, rapid thermocycler was developed for multiplex analysis of nucleic acids in an inexpensive, portable configuration. Instead of the commonly used Peltier heating/cooling element, electric thin-film resistive heater and a miniature fan enable rapid heating and cooling of glass capillaries leading to a simple, low-cost Thin-Film Resistive Thermocycler (TFRT). Computer-based pulse width modulation control yields heating rates of 6-7 K/s and cooling rates of 5 K/s. The four capillaries are closely coupled to the heater, resulting in low power consumption. The energy required by a nominal PCR cycle (20 s at each temperature) was found to be 57+/-2 J yielding an average power of approximately 1.0 W (not including the computer and the control system). Thus the device can be powered by a standard 9 V alkaline battery (or other 9 V power supply). The prototype TFRT was demonstrated (in a benchtop configuration) for detection of three important food pathogens (E. coli ETEC, Shigella dysenteriae, and Salmonella enterica). PCR amplicons were analyzed by gel electrophoresis. The 35 cycle PCR protocol using a single channel was completed in less then 18 min. Simple and efficient heating/cooling, low cost, rapid amplification, and low power consumption make the device suitable for portable DNA amplification applications including clinical point of care diagnostics and field use.

Progress of science from microscopy to microarrays (part 1): diagnosis of parasitic diseases

Even though description of the magnifying glass goes back to 1021 by an Arabic physicist in his book, Antony van Leeuwenhoek was the first man to improve the then simple microscope for viewing biological specimens in 1674. This suggests that every discovery has scope for improvement, be it physics or be it biology. In the field of biology, scientists have long studied gene expression as a hallmark of gene activities reflecting the current cell conditions and response to host immune defense systems. These studies have been cumbersome, technically demanding and time-consuming. Application of microarrays has revolutionized this field and help understand the simultaneous expression of thousands of genes in a single sample put onto a single solid support. It is also now possible to compare gene expression in two different cell types, different stages of life cycle or two tissue samples, such as in healthy and diseased ones. Thus microarrays are beginning to dominate other conventional and molecular diagnostic technologies. The microarrays consist of solid supports onto which the nucleic acid sequences from thousands of different genes are immobilized, or attached at fixed locations. These solid supports themselves are usually glass slides, silicon chips or nylon membranes. The nucleic acids are spotted or synthesized directly onto the support. Application of microarrays is new for parasites. Most of these applications are done for monitoring parasite gene expression, to predict the functions of uncharacterized genes, probe the physiologic adaptations made under various environmental conditions, identify virulence-associated genes and test the effects of drug targets. The best examples are vector-borne parasites, such as Plasmodium, Trypanosoma and Leishmania, in which genes expressed, during mammalian and insect host stages, have been elucidated. Microarrays have also been successfully applied to understand the factors responsible to induce transformation from tachyzoite-to-bradyzoite and vice versa in Toxoplasma gondii. Thus microarrays provide a novel tool for diagnosis, prognosis and clinical management of infectious disease.