Exosporium and spore coat formation in Bacillus cereus T

Clostridioides difficile Sporulation

Some members of the Firmicutes phylum, including many members of the human gut microbiota, are able to differentiate a dormant and highly resistant cell type, the endospore (hereinafter spore for simplicity). Spore-formers can colonize virtually any habitat and, because of their resistance to a wide variety of physical and chemical insults, spores can remain viable in the environment for long periods of time. In the anaerobic enteric pathogen Clostridioides difficile the aetiologic agent is the oxygen-resistant spore, while the toxins produced by actively growing cells are the main cause of the disease symptoms. Here, we review the regulatory circuits that govern entry into sporulation. We also cover the role of spores in the infectious cycle of C. difficile in relation to spore structure and function and the main control points along spore morphogenesis.

A new fluorescence-based approach for direct visualization of coat formation during sporulation in Bacillus cereus

The human pathogenic bacteria Bacillus cereus, Bacillus anthracis and the entomopathogenic Bacillus thuringiensis form spores encased in a protein coat surrounded by a balloon-like exosporium. These structures mediate spore interactions with its environment, including the host immune system, control the transit of molecules that trigger germination and thus are essential for the spore life cycle. Formation of the coat and exosporium has been traditionally visualized by transmission electronic microscopy on fixed cells. Recently, we showed that assembly of the exosporium can be directly observed in live B. cereus cells by super resolution-structured illumination microscopy (SR-SIM) using the membrane MitoTrackerGreen (MTG) dye. Here, we demonstrate that the different steps of coat formation can also be visualized by SR-SIM using MTG and SNAP-cell TMR-star dyes during B. cereus sporulation. We used these markers to characterize a subpopulation of engulfment-defective B. cereus cells that develops at a suboptimal sporulation temperature. Importantly, we predicted and confirmed that synthesis and accumulation of coat material, as well as synthesis of the σK-dependent protein BxpB, occur in cells arrested during engulfment. These results suggest that, unlike the well-studied model organism Bacillus subtilis, the activity of σK is not strictly linked to the state of forespore development in B. cereus.

The Morphogenetic Protein CotE Positions Exosporium Proteins CotY and ExsY during Sporulation of Bacillus cereus

The exosporium is the outermost spore layer of some Bacillus and Clostridium species and related organisms. It mediates the interactions of spores with their environment, modulates spore adhesion and germination, and has been implicated in pathogenesis. In Bacillus cereus, the exosporium consists of a crystalline basal layer, formed mainly by the two cysteine-rich proteins CotY and ExsY, surrounded by a hairy nap composed of glycoproteins. The morphogenetic protein CotE is necessary for the integrity of the B. cereus exosporium, but how CotE directs exosporium assembly remains unknown. Here, we used super-resolution fluorescence microscopy to follow the localization of SNAP-tagged CotE, CotY, and ExsY during B. cereus sporulation and evidenced the interdependencies among these proteins. Complexes of CotE, CotY, and ExsY are present at all sporulation stages, and the three proteins follow similar localization patterns during endospore formation that are reminiscent of the localization pattern of Bacillus subtilis CotE. We show that B. cereus CotE guides the formation of one cap at both forespore poles by positioning CotY and then guides forespore encasement by ExsY, thereby promoting exosporium elongation. By these two actions, CotE ensures the formation of a complete exosporium. Importantly, we demonstrate that the assembly of the exosporium is not a unidirectional process, as previously proposed, but occurs through the formation of two caps, as observed during B. subtilis coat morphogenesis, suggesting that a general principle governs the assembly of the spore surface layers of Bacillaceae.

IMPORTANCE Spores of Bacillaceae are enveloped in an outermost glycoprotein layer. In the B. cereus group, encompassing the Bacillus anthracis and B. cereus pathogens, this layer is easily recognizable by a characteristic balloon-like appearance and separation from the underlying coat by an interspace. In spite of its importance for the environmental interactions of spores, including those with host cells, the mechanism of assembly of the exosporium is poorly understood. We used super-resolution fluorescence microscopy to directly visualize the formation of the exosporium during the sporulation of B. cereus, and we studied the localization and interdependencies of proteins essential for exosporium morphogenesis. We discovered that these proteins form a morphogenetic scaffold before a complete exosporium or coat is detectable. We describe how the different proteins localize to the scaffold and how they subsequently assemble around the spore, and we present a model for the assembly of the exosporium.

Coordinated Assembly of the Bacillus anthracis Coat and Exosporium during Bacterial Spore Outer Layer Formation

This work dramatically improves our understanding of the assembly of the outermost layer of the B. anthracis spore, the exosporium, a layer that encases spores from many bacterial species and likely plays important roles in the spore’s interactions with the environment, including host tissues. Nonetheless, the mechanisms directing exosporium assembly into a shell surrounding the spore are still very poorly understood. In this study, we clarify these mechanisms by the identification of a novel protein interaction network that directs assembly to initiate at a specific subcellular location in the developing cell. Our results further suggest that the presence or absence of an exosporium has a major impact on the assembly of other more interior spore layers, thereby potentially explaining long-noted differences in spore assembly between B. anthracis and the model organism B. subtilis.

Bacterial spores produced by the Bacillales are composed of concentric shells, each of which contributes to spore function. Spores from all species possess a cortex and coat, but spores from many species possess additional outer layers. The outermost layer of Bacillus anthracis spores, the exosporium, is separated from the coat by a gap known as the interspace. Exosporium and interspace assembly remains largely mysterious. As a result, we have a poor understanding of the overarching mechanisms driving the assembly of one of the most ubiquitous cell types in nature. To elucidate the mechanisms directing exosporium assembly, we generated strains bearing mutations in candidate exosporium-controlling genes and analyzed the effect on exosporium formation. Biochemical and cell biological analyses argue that CotE directs the assembly of CotO into the spore and that CotO might be located at or close to the interior side of the cap. Taken together with data showing that CotE and CotO interact directly in vitro, we propose a model in which CotE and CotO are important components of a protein interaction network that connects the exosporium to the forespore during cap formation and exosporium elongation. Our data also suggest that the cap interferes with coat assembly at one pole of the spore, altering the pattern of coat deposition compared to the model organism Bacillus subtilis. We propose that the difference in coat assembly patterns between these two species is due to an inherent flexibility in coat assembly, which may facilitate the evolution of spore outer layer complexity.

Structural Characterization of Clostridium sordellii Spores of Diverse Human, Animal, and Environmental Origin and Comparison to Clostridium difficile Spores

Clostridium sordellii is a significant pathogen with mortality rates approaching 100%. It is the bacterial spore that is critical in initiating infection and disease. An understanding of spore structures as well as spore morphology across a range of strains may lead to a better understanding of C. sordellii infection and disease. However, the structural characteristics of the C. sordellii spores are limited. In this work, we have addressed this lack of detail and characterized the C. sordellii spore morphology. The use of traditional and advanced microscopy techniques has provided detailed new observations of C. sordellii spore structural features, which serve as a reference point for structural studies of spores from other bacterial species.

Clostridium sordellii is an often-lethal bacterium causing human and animal disease. Crucial to the infectious cycle of C. sordellii is its ability to produce spores, which can germinate into toxin-producing vegetative bacteria under favorable conditions. However, structural details of the C. sordellii spore are lacking. Here, we used a range of electron microscopy techniques together with superresolution optical microscopy to characterize the C. sordellii spore morphology with an emphasis on the exosporium. The C. sordellii spore is made up of multiple layers with the exosporium presenting as a smooth balloon-like structure that is open at the spore poles. Focusing on the outer spore layers, we compared the morphologies of C. sordellii spores derived from different strains and determined that there is some variation between the spores, most notably with spores of some strains having tubular appendages. Since Clostridium difficile is a close relative of C. sordellii, their spores were compared by electron microscopy and their exosporia were found to be distinctly different from each other. This study therefore provides new structural details of the C. sordellii spore and offers insights into the physical structure of the exosporium across clostridial species.

IMPORTANCEClostridium sordellii is a significant pathogen with mortality rates approaching 100%. It is the bacterial spore that is critical in initiating infection and disease. An understanding of spore structures as well as spore morphology across a range of strains may lead to a better understanding of C. sordellii infection and disease. However, the structural characteristics of the C. sordellii spores are limited. In this work, we have addressed this lack of detail and characterized the C. sordellii spore morphology. The use of traditional and advanced microscopy techniques has provided detailed new observations of C. sordellii spore structural features, which serve as a reference point for structural studies of spores from other bacterial species.

Molecular tiling on the surface of a bacterial spore - the exosporium of the Bacillus anthracis/cereus/thuringiensis group

Bacteria of the genera Bacillus and Clostridium form highly resistant spores, which in the case of some pathogens act as the infectious agents. An exosporium forms the outermost layer of some spores; it plays roles in protection, adhesion, dissemination, host targeting in pathogens and germination control. The exosporium of the Bacillus cereus group, including the anthrax pathogen, contains a 2D‐crystalline basal layer, overlaid by a hairy nap. BclA and related proteins form the hairy nap, and require ExsFA (BxpB) for their localization on the basal layer. Until now, the identity of the main structural protein components of the basal layer was unknown. We demonstrate here that ExsY forms one of the essential components. Through heterologous expression in Escherichia coli, we also demonstrate that ExsY can self‐assemble into ordered 2D arrays that mimic the structure of the exosporium basal layer. Self‐assembly is likely to play an important role in the construction of the exosporium. The ExsY array is stable to heat and chemical denaturants, forming a robust layer that would contribute to overall spore resistance. Our structural analysis also provides novel insight into the location of other molecular components anchored onto the exosporium, such as BclA and ExsFA.

The Bacillus anthracis Exosporium: What's the Big "Hairy" Deal?

In some Bacillus species, including Bacillus subtilis, the coat is the outermost layer of the spore. In others, such as the Bacillus cereus family, there is an additional layer that envelops the coat, called the exosporium. In the case of Bacillus anthracis, a series of fine hair-like projections, also referred to as a "hairy" nap, extends from the exosporium basal layer. The exact role of the exosporium in B. anthracis, or for any of the Bacillus species possessing this structure, remains unclear. However, it has been assumed that the exosporium would play some role in infection for B. anthracis, because it is the outermost structure of the spore and would make initial contact with host and immune cells during infection. Therefore, the exosporium has been a topic of great interest, and over the past decade much progress has been made to understand its composition, biosynthesis, and potential roles. Several key aspects of this spore structure, however, are still debated and remain undetermined. Although insights have been gained on the interaction of exosporium with the host during infection, the exact role and significance of this complex structure remain to be determined. Furthermore, because the exosporium is a highly antigenic structure, future strategies for the next-generation anthrax vaccine should pursue its inclusion as a component to provide protection against the spore itself during the initial stages of anthrax.

The Exosporium Layer of Bacterial Spores: a Connection to the Environment and the Infected Host

Much of what we know regarding bacterial spore structure and function has been learned from studies of the genetically well-characterized bacterium Bacillus subtilis. Molecular aspects of spore structure, assembly, and function are well defined. However, certain bacteria produce spores with an outer spore layer, the exosporium, which is not present on B. subtilis spores. Our understanding of the composition and biological functions of the exosporium layer is much more limited than that of other aspects of the spore. Because the bacterial spore surface is important for the spore's interactions with the environment, as well as being the site of interaction of the spore with the host's innate immune system in the case of spore-forming bacterial pathogens, the exosporium is worthy of continued investigation. Recent exosporium studies have focused largely on members of the Bacillus cereus family, principally Bacillus anthracis and Bacillus cereus. Our understanding of the composition of the exosporium, the pathway of its assembly, and its role in spore biology is now coming into sharper focus. This review expands on a 2007 review of spore surface layers which provided an excellent conceptual framework of exosporium structure and function (A. O. Henriques and C. P. Moran, Jr., Annu Rev Microbiol 61:555-588, 2007, http://dx.doi.org/10.1146/annurev.micro.61.080706.093224). That review began a process of considering outer spore layers as an integrated, multilayered structure rather than simply regarding the outer spore components as independent parts.

Collagen-like glycoprotein BclS is involved in the formation of filamentous structures of the Lysinibacillus sphaericus exosporium

Lysinibacillus sphaericus produces mosquitocidal binary toxins (Bin toxins) deposited within a balloon-like exosporium during sporulation. Unlike Bacillus cereus group strains, the exosporium of L. sphaericus is usually devoid of the hair-like nap, an external filamentous structure formed by a collagen-like protein, BclA. In this study, a new collagen-like exosporium protein encoded by Bsph_0411 (BclS) from L. sphaericus C3-41 was characterized. Thin-section electron microscopy revealed that deletion of bclS resulted in the loss of the filamentous structures that attach to the exosporium basal layer and spread through the interspace of spores. In vivo visualization of BclS-green fluorescent protein (GFP)/mCherry fusion proteins revealed a dynamic pattern of fluorescence that encased the spore from the mother cell-distal (MCD) pole of the forespore, and the BclS-GFP fusions were found to be located in the interspace of the spore, as confirmed by three-dimensional (3D) superresolution fluorescence microscopy. Further studies demonstrated that the bclS mutant spores were more sensitive to wet-heat treatment and germinated at a lower rate than wild-type spores and that these phenotypes were significantly restored in the bclS-complemented strain. These results suggested novel roles of collagen-like protein in exosporium assembly and spore germination, providing a hint for a further understanding of the genetic basis of the high level of persistence of Bin toxins in nature.

A genetic approach for the identification of exosporium assembly determinants of Bacillus anthracis

The exosporium is the outermost layer of spores of the zoonotic pathogen Bacillus anthracis. The composition of the exosporium and its functions are only partly understood. Because this outer spore layer is refractive to traditional biochemical analysis, a genetic approach is needed in order to define the proteins which comprise this important spore layer and its assembly pathway. We have created a novel genetic screening system for the identification and isolation of mutants with defects in exosporium assembly during B. anthracis spore maturation. The system is based on the targeting sequence of the BclA exosporium nap layer glycoprotein and a fluorescent reporter. By utilizing this screening system and gene inactivation with Tn916, several novel putative exosporium-associated determinants were identified. A sampling of the mutants obtained was further characterized, confirming their exosporium defect and validating the utility of this screen to identify novel spore determinants in the genome of this pathogen.

The Bacillus subtilis endospore: assembly and functions of the multilayered coat

Sporulation in Bacillus subtilis involves an asymmetric cell division followed by differentiation into two cell types, the endospore and the mother cell. The endospore coat is a multilayered shell that protects the bacterial genome during stress conditions and is composed of dozens of proteins. Recently, fluorescence microscopy coupled with high-resolution image analysis has been applied to the dynamic process of coat assembly and has shown that the coat is organized into at least four distinct layers. In this Review, we provide a brief summary of B. subtilis sporulation, describe the function of the spore surface layers and discuss the recent progress that has improved our understanding of the structure of the endospore coat and the mechanisms of coat assembly.

YwdL in Bacillus cereus: its role in germination and exosporium structure

In members of the Bacillus cereus group the outermost layer of the spore is the exosporium, which interacts with hosts and the environment. Efforts have been made to identify proteins of the exosporium but only a few have so far been characterised and their role in determining spore architecture and spore function is still poorly understood. We have characterised the exosporium protein, YwdL. ΔywdL spores have a more fragile exosporium, subject to damage on repeated freeze-thawing, although there is no evidence of altered resistance properties, and coats appear intact. Immunogold labelling and Western blotting with anti-YwdL antibodies identified YwdL to be located exclusively on the inner surface of the exosporium of B. cereus and B. thuringiensis. We conclude that YwdL is important for formation of a robust exosporium but is not required to maintain the crystalline assembly within the basal layer or for attachment of the hairy nap structure. ΔywdL spores are unable to germinate in response to CaDPA, and have altered germination properties, a phenotype that confirms the expected defect in localization of the cortex lytic enzyme CwlJ in the coat.

Localization and assembly of the novel exosporium protein BetA of Bacillus anthracis

The exosporium of Bacillus anthracis is comprised of two distinct layers: a basal layer and a hair-like nap that covers the basal layer. The hair-like nap contains the glycoproteins BclA and, most likely, BclB. BclA and BclB are directed to assemble into the exosporium by motifs in their N-terminal domains. Here, we identify a previously uncharacterized putative gene encoding this motif, which we have named betA (Bacillus exosporium-targeted protein of B. anthracis). Like bclA, betA encodes a putative collagenlike repeat region. betA is present in several genomes of exosporium-producing Bacillus species but, so far, not in any others. Using fluorescence microscopic localization of a BetA-enhanced green fluorescent protein (eGFP) fusion protein and immunofluorescence microscopy with anti-BetA antibodies, we showed that BetA resides in the exosporium basal layer, likely underneath BclA. BetA assembles at the spore surface at around hour 5 of sporulation and under the control of BxpB, similar to the control of deposition of BclA. We suggest a model in which BclA and BetA are incorporated into the exosporium by a mechanism that depends on their similar N termini. These data suggest that BetA is a member of a growing family of exosporium proteins that assemble under the control of targeting sequences in their N termini.

The co-dependence of BxpB/ExsFA and BclA for proper incorporation into the exosporium of Bacillus anthracis

The outermost layer of the Bacillus anthracis spore consists of an exosporium comprised of two distinct layers, an outer hair-like nap layer and an internal basal layer. The hair-like nap is primarily comprised of the glycosylated collagen-like protein BclA. BclA is found in a trimeric form in close association with many other exosporium proteins in high-molecular weight complexes. We previously had characterized an N-terminal sequence of BclA that is sufficient for incorporation into the exosporium. Here we utilized site-directed mutagenesis to identify BclA residues critical to two steps in this process, positioning of the protein at the site of the developing exosporium basal layer and stable incorporation which includes a proteolytic cleavage of BclA after residue 19. The BxpB (ExsFA) protein is known to be important for proper incorporation of BclA onto the exosporium. BxpB and BclA were found to be expressed at the same time in sporulating cells of B. anthracis and immediately colocalize to high-molecular weight complexes. The BxpB protein was found to be in close proximity to the BclA NTD. BxpB and BclA are co-dependent for exosporium incorporation, with the BclA NTD being sufficient to deliver BxpB to the exosporium.

A novel spore protein, ExsM, regulates formation of the exosporium in Bacillus cereus and Bacillus anthracis and affects spore size and shape

Bacillus cereus spores are assembled with a series of concentric layers that protect them from a wide range of environmental stresses. The outermost layer, or exosporium, is a bag-like structure that interacts with the environment and is composed of more than 20 proteins and glycoproteins. Here, we identified a new spore protein, ExsM, from a beta-mercaptoethanol extract of B. cereus ATCC 4342 spores. Subcellular localization of an ExsM-green fluorescent protein (GFP) protein revealed a dynamic pattern of fluorescence that follows the site of formation of the exosporium around the forespore. Under scanning electron microscopy, exsM null mutant spores were smaller and rounder than wild-type spores, which had an extended exosporium (spore length for the wt, 2.40 +/- 0.56 microm, versus that for the exsM mutant, 1.66 +/- 0.38 microm [P < 0.001]). Thin-section electron microscopy revealed that exsM mutant spores were encased by a double-layer exosporium, both layers of which were composed of a basal layer and a hair-like nap. Mutant exsM spores were more resistant to lysozyme treatment and germinated with higher efficiency than wild-type spores, and they had a delay in outgrowth. Insertional mutagenesis of exsM in Bacillus anthracis DeltaSterne resulted in a partial second exosporium and in smaller spores. In all, these findings suggest that ExsM plays a critical role in the formation of the exosporium.

Roles of the Bacillus anthracis spore protein ExsK in exosporium maturation and germination

The Bacillus anthracis spore is the causative agent of the disease anthrax. The outermost structure of the B. anthracis spore, the exosporium, is a shell composed of approximately 20 proteins. The function of the exosporium remains poorly understood and is an area of active investigation. In this study, we analyzed the previously identified but uncharacterized exosporium protein ExsK. We found that, in contrast to other exosporium proteins, ExsK is present in at least two distinct locations, i.e., the spore surface as well as a more interior location underneath the exosporium. In spores that lack the exosporium basal layer protein ExsFA/BxpB, ExsK fails to encircle the spore and instead is present at only one spore pole, indicating that ExsK assembly to the spore is partially dependent on ExsFA/BxpB. In spores lacking the exosporium surface protein BclA, ExsK fails to mature into high-molecular-mass species observed in wild-type spores. These data suggest that the assembly and maturation of ExsK within the exosporium are dependent on ExsFA/BxpB and BclA. We also found that ExsK is not required for virulence in murine and guinea pig models but that it does inhibit germination. Based on these data, we propose a revised model of exosporium maturation and assembly and suggest a novel role for the exosporium in germination.

Localization and assembly of proteins comprising the outer structures of the Bacillus anthracis spore

Bacterial spores possess a series of concentrically arranged protective structures that contribute to dormancy, survival and, ultimately, germination. One of these structures, the coat, is present in all spores. In Bacillus anthracis, however, the spore is surrounded by an additional, poorly understood, morphologically complex structure called the exosporium. Here, we characterize three previously discovered exosporium proteins called ExsFA (also known as BxpB), ExsFB (a highly related paralogue of exsFA/bxpB) and IunH (similar to an inosine-uridine-preferring nucleoside hydrolase). We show that in the absence of ExsFA/BxpB, the exosporium protein BclA accumulates asymmetrically to the forespore pole closest to the midpoint of the sporangium (i.e. the mother-cell-proximal pole of the forespore), instead of uniformly encircling the exosporium. ExsFA/BxpB may also have a role in coat assembly, as mutant spore surfaces lack ridges seen in wild-type spores and have a bumpy appearance. ExsFA/BxpB also has a modest but readily detected effect on germination. Nonetheless, an exsFA/bxpB mutant strain is fully virulent in both intramuscular and aerosol challenge models in Guinea pigs. We show that the pattern of localization of ExsFA/BxpB-GFP is a ring, consistent with a location for this protein in the basal layer of the exosporium. In contrast, ExsFB-GFP fluorescence is a solid oval, suggesting a distinct subcellular location for ExsFB-GFP. We also used these fusion proteins to monitor changes in the subcellular locations of these proteins during sporulation. Early in sporulation, both fusions were present throughout the mother cell cytoplasm. As sporulation progressed, GFP fluorescence moved from the mother cell cytoplasm to the forespore surface and formed either a ring of fluorescence, in the case of ExsFA/BxpB, or a solid oval of fluorescence, in the case of ExsFB. IunH-GFP also resulted in a solid oval of fluorescence. We suggest the interpretation that at least some ExsFB-GFP and IunH-GFP resides in the region between the coat and the exosporium, called the interspace.

Structure of the exosporium and sublayers of spores of the Bacillus cereus family revealed by electron crystallography

We report on the first step in mapping out the spatial location of structural proteins within the exosporium, namely a description of its three-dimensional architecture. Using electron microscopy and image analysis, we have characterized crystalline fragments from the exosporium of Bacillus cereus, B. thuringiensis and B. anthracis strains and identified up to three distinct crystal types. Type I and type II crystals were examined in three dimensions and shown to form arrays of interlinked crown-like structures each enclosing a cavity approximately 26-34 A deep with threefold symmetry. The arrays appear to be permeated by tunnels allowing access from one surface to the other, possibly indicating that the exosporium forms a semi-permeable barrier. The pore size of approximately 23-34 A would allow passage of the endospore germinants, alanine or inosine but not degradative enzymes or antibodies. Thus the structures appear compatible with a protective role for the exosporium. Furthermore the outermost crystalline layer must act as a scaffold for binding the BclA protein that contributes to the 'hairy nap' layer. The array of crowns may also act as a matrix for the binding or adsorption of other proteins that have been identified in the exosporium such as GroEL, immune inhibitor A and arginase.

Electron microscopic examination of the dormant spore and the sporulation of Paenibacillus motobuensis strain MC10

We previously reported a new species Paenibacillus motobuensis. The type strain MC10 was stained gram-negative, but had a gram-positive cell wall structure and its spore had a characteristic star shape. The spore and sporulation process of P. motobuensis strain MC10 were examined by electron microscopy using the technique of freeze-substitution in thin sectioning. The structure of the dormant spore was basically the same as that of the other Bacillus spp. The core of the spore was enveloped with two main spore components, the cortex and the spore coat. In thin section, the spore showed a star-shaped image, which was derived from the structure of the spore coat, which is composed of three layers, namely the inner, middle and outer spore coat. The middle coat was an electron-dense thick layer and had a characteristic ridge. By scanning electron microscopic observation, the ridges were seen running parallel to the long axis of the oval-shaped spore. The process of sporulation was essentially the same as that of the other Bacillus spp. The forespore was engulfed by the mother cell membrane, then the spore coat and the cortex were accumulated in the space between the mother cell membrane and forespore membrane. The mother cell membrane seemed to participate in the synthesis of the spore coat. MC10 strain showed almost identical heat resistance to that of B. subtilis.

Structure, assembly, and function of the spore surface layers

Endospores formed by Bacillus, Clostridia, and related genera are encased in a protein shell called the coat. In many species, including B. subtilis, the coat is the outermost spore structure, and in other species, such as the pathogenic organisms B. anthracis and B. cereus, the spore is encased in an additional layer called the exosporium. Both the coat and the exosporium have roles in protection of the spore and in its environmental interactions. Assembly of both structures is a function of the mother cell, one of two cellular compartments of the developing sporangium. Studies in B. subtilis have revealed that the timing of coat protein production, the guiding role of a small group of morphogenetic proteins, and several types of posttranslational modifications are essential for the fidelity of the assembly process. Assembly of the exosporium requires a set of novel proteins as well as homologues of proteins found in the outermost layers of the coat and of some of the coat morphogenetic factors, suggesting that the exosporium is a more specialized structure of a multifunctional coat. These and other insights into the molecular details of spore surface morphogenesis provide avenues for exploitation of the spore surface layers in applications for biotechnology and medicine.

Non-uniform assembly of the Bacillus anthracis exosporium and a bottle cap model for spore germination and outgrowth

Spores of Bacillus anthracis are enclosed by an exosporium composed of a basal layer and an external hair-like nap. The nap is formed by a collagen-like glycoprotein called BclA, while the basal layer contains many different proteins, one of which is a spore-specific alanine racemase (Alr). In this study, we employed fluorescence microscopy and a fluorescently labelled anti-Alr monoclonal antibody (mAb) to examine the distribution of Alr within the exosporium. Binding of the mAb occurred over approximately three-quarters of the exosporium but not in a cap-like region at one end of the spore, indicating the absence or inaccessibility of Alr in this region. We also determined that the cap-like region, or cap, corresponds to the first part of the exosporium assembled within the mother cell during sporulation and the only part of the exosporium assembled in a DeltaexsY mutant strain of B. anthracis. Our results provide the first direct evidence that exosporium assembly is a non-uniform process and suggest that exosporium formation is discontinuous. Finally, we demonstrated that during spore germination and outgrowth, the outgrowing cell always escapes from its exosporium shell by popping through the cap, suggesting that the cap is designed to facilitate the emergence of the outgrowing cell.

Morphogenesis of the Bacillus anthracis spore

Bacillus spp. and Clostridium spp. form a specialized cell type, called a spore, during a multistep differentiation process that is initiated in response to starvation. Spores are protected by a morphologically complex protein coat. The Bacillus anthracis coat is of particular interest because the spore is the infective particle of anthrax. We determined the roles of several B. anthracis orthologues of Bacillus subtilis coat protein genes in spore assembly and virulence. One of these, cotE, has a striking function in B. anthracis: it guides the assembly of the exosporium, an outer structure encasing B. anthracis but not B. subtilis spores. However, CotE has only a modest role in coat protein assembly, in contrast to the B. subtilis orthologue. cotE mutant spores are fully virulent in animal models, indicating that the exosporium is dispensable for infection, at least in the context of a cotE mutation. This has implications for both the pathophysiology of the disease and next-generation therapeutics. CotH, which directs the assembly of an important subset of coat proteins in B. subtilis, also directs coat protein deposition in B. anthracis. Additionally, however, in B. anthracis, CotH effects germination; in its absence, more spores germinate than in the wild type. We also found that SpoIVA has a critical role in directing the assembly of the coat and exosporium to an area around the forespore. This function is very similar to that of the B. subtilis orthologue, which directs the assembly of the coat to the forespore. These results show that while B. anthracis and B. subtilis rely on a core of conserved morphogenetic proteins to guide coat formation, these proteins may also be important for species-specific differences in coat morphology. We further hypothesize that variations in conserved morphogenetic coat proteins may play roles in taxonomic variation among species.

ExsY and CotY are required for the correct assembly of the exosporium and spore coat of Bacillus cereus

The exosporium-defective phenotype of a transposon insertion mutant of Bacillus cereus implicated ExsY, a homologue of B. subtilis cysteine-rich spore coat proteins CotY and CotZ, in assembly of an intact exosporium. Single and double mutants of B. cereus lacking ExsY and its paralogue, CotY, were constructed. The exsY mutant spores are not surrounded by an intact exosporium, though they often carry attached exosporium fragments. In contrast, the cotY mutant spores have an intact exosporium, although its overall shape is altered. The single mutants show altered, but different, spore coat properties. The exsY mutant spore coat is permeable to lysozyme, whereas the cotY mutant spores are less resistant to several organic solvents than is the case for the wild type. The exsY cotY double-mutant spores lack exosporium and have very thin coats that are permeable to lysozyme and are sensitive to chloroform, toluene, and phenol. These spore coat as well as exosporium defects suggest that ExsY and CotY are important to correct formation of both the exosporium and the spore coat in B. cereus. Both ExsY and CotY proteins were detected in Western blots of purified wild-type exosporium, in complexes of high molecular weight, and as monomers. Both exsY and cotY genes are expressed at late stages of sporulation.

The ExsY protein is required for complete formation of the exosporium of Bacillus anthracis

The outermost layer of the Bacillus anthracis spore is the exosporium, which is composed of a paracrystalline basal layer and an external hair-like nap. The filaments of the nap are formed by a collagen-like glycoprotein called BclA, while the basal layer contains several different proteins. One of the putative basal layer proteins is ExsY. In this study, we constructed a DeltaexsY mutant of B. anthracis, which is devoid of ExsY, and examined the assembly of the exosporium on spores produced by this strain. Our results show that exosporium assembly on DeltaexsY spores is aberrant, with assembly arrested after the formation of a cap-like fragment that covers one end of the forespore-always the end near the middle of the mother cell. The cap contains a normal hair-like nap but an irregular basal layer. The cap is retained on spores prepared on solid medium, even after spore purification, but it is lost from spores prepared in liquid medium. Microscopic inspection of DeltaexsY spores prepared on solid medium revealed a fragile sac-like sublayer of the exosporium basal layer, to which caps were attached. Examination of purified DeltaexsY spores devoid of exosporium showed that they lacked detectable levels of BclA and the basal layer proteins BxpB, BxpC, CotY, and inosine-uridine-preferring nucleoside hydrolase; however, these spores retained half the amount of alanine racemase presumed to be associated with the exosporium of wild-type spores. The DeltaexsY mutation did not affect spore production and germination efficiencies or spore resistance but did influence the course of spore outgrowth.

Contribution of ExsFA and ExsFB proteins to the localization of BclA on the spore surface and to the stability of the bacillus anthracis exosporium

Spores of Bacillus anthracis, the etiological agent of anthrax, and the closely related species Bacillus cereus and Bacillus thuringiensis, possess an exosporium, which is the outermost structure surrounding the mature spore. It consists of a paracrystalline basal layer and a hair-like outer layer. To date, the structural contribution of only one exosporium component, the collagen-like glycoprotein BclA, has been described. It is the structural component of the hair-like filaments. Here, we describe two other proteins, ExsFA and ExsFB, which are probably organized in multimeric complexes with other exosporium components, including BclA. Single and double exsF deletion mutants were constructed and analyzed. We found that inactivation of exsF genes affects the BclA content of spores. BclA is produced by all mutants. However, it is partially and totally released after mother cell lysis of the DeltaexsFA and DeltaexsFA DeltaexsFB mutant strains, respectively. Electron microscopy revealed that the exsF mutant spores have defective exosporia. The DeltaexsFA and DeltaexsFA DeltaexsFB spore surfaces are partially and totally devoid of filaments, respectively. Moreover, for all mutants, the crystalline basal layer appeared unstable. This instability revealed the presence of two distinct crystalline arrays that are sloughed off from the spore surface. These results indicate that ExsF proteins are required for the proper localization of BclA on the spore surface and for the stability of the exosporium crystalline layers.

Architecture and high-resolution structure of Bacillus thuringiensis and Bacillus cereus spore coat surfaces

We have utilized atomic force microscopy (AFM) to visualize the native surface topography and ultrastructure of Bacillus thuringiensis and Bacillus cereus spores in water and in air. AFM was able to resolve the nanostructure of the exosporium and three distinctive classes of appendages. Removal of the exosporium exposed either a hexagonal honeycomb layer (B. thuringiensis) or a rodlet outer spore coat layer (B. cereus). Removal of the rodlet structure from B. cereus spores revealed an underlying honeycomb layer similar to that observed with B. thuringiensis spores. The periodicity of the rodlet structure on the outer spore coat of B. cereus was approximately 8 nm, and the length of the rodlets was limited to the cross-patched domain structure of this layer to approximately 200 nm. The lattice constant of the honeycomb structures was approximately 9 nm for both B. cereus and B. thuringiensis spores. Both honeycomb structures were composed of multiple, disoriented domains with distinct boundaries. Our results demonstrate that variations in storage and preparation procedures result in architectural changes in individual spore surfaces, which establish AFM as a useful tool for evaluation of preparation and processing "fingerprints" of bacterial spores. These results establish that high-resolution AFM has the capacity to reveal species-specific assembly and nanometer scale structure of spore surfaces. These species-specific spore surface structural variations are correlated with sequence divergences in a spore core structural protein SspE.

The ExsA protein of Bacillus cereus is required for assembly of coat and exosporium onto the spore surface

The outermost layer of spores of the Bacillus cereus family is a loose structure known as the exosporium. Spores of a library of Tn917-LTV1 transposon insertion mutants of B. cereus ATCC 10876 were partitioned into hexadecane; a less hydrophobic mutant that was isolated contained an insertion in the exsA promoter region. ExsA is the equivalent of SafA (YrbA) of Bacillus subtilis, which is also implicated in spore coat assembly; the gene organizations around both are identical, and both proteins contain a very conserved N-terminal cortex-binding domain of ca. 50 residues, although the rest of the sequence is much less conserved. In particular, unlike SafA, the ExsA protein contains multiple tandem oligopeptide repeats and is therefore likely to have an extended structure. The exsA gene is expressed in the mother cell during sporulation. Spores of an exsA mutant are extremely permeable to lysozyme and are blocked in late stages of germination, which require coat-associated functions. Two mutants expressing differently truncated versions of ExsA were constructed, and they showed the same gross defects in the attachment of exosporium and spore coat layers. The protein profile of the residual exosporium harvested from spores of the three mutants--two expressing truncated proteins and the mutant with the original transposon insertion in the promoter region--showed some differences from the wild type and from each other, but the major exosporium glycoproteins were retained. The exsA gene is extremely important for the normal assembly and anchoring of both the spore coat and exosporium layers in spores of B. cereus.

Morphogenesis of bacillus spore surfaces

Spores produced by bacilli are encased in a proteinaceous multilayered coat and, in some species (including Bacillus anthracis), further surrounded by a glycoprotein-containing exosporium. To characterize bacillus spore surface morphology and to identify proteins that direct formation of coat surface features, we used atomic-force microscopy (AFM) to image the surfaces of wild-type and mutant spores of Bacillus subtilis, as well as the spore surfaces of Bacillus cereus 569 and the Sterne strain of Bacillus anthracis. This analysis revealed that the coat surfaces in these strains are populated by a series of bumps ranging between 7 and 40 nm in diameter, depending on the species. Furthermore, a series of ridges encircled the spore, most of which were oriented along the long axis of the spore. The structures of these ridges differ sufficiently between species to permit species-specific identification. We propose that ridges are formed early in spore formation, when the spore volume likely decreases, and that when the spore swells during germination the ridges unfold. AFM analysis of a set of B. subtilis coat protein gene mutants revealed three coat proteins with roles in coat surface morphology: CotA, CotB, and CotE. Our data indicate novel roles for CotA and CotB in ridge pattern formation. Taken together, these results are consistent with the view that the coat is not inert. Rather, the coat is a dynamic structure that accommodates changes in spore volume.

Identification of the immunodominant protein and other proteins of the Bacillus anthracis exosporium

Spores of Bacillus anthracis, the causative agent of anthrax, are enclosed by a prominent loose-fitting, balloon-like layer called the exosporium. Although the exosporium serves as the source of surface antigens and a primary permeability barrier of the spore, its molecular structure and function are not well characterized. In this study, we identified five major proteins in purified B. anthracis (Sterne strain) exosporia. One protein was the recently identified collagen-like glycoprotein BclA, which appears to be a structural component of the exosporium hair-like nap. Using a large panel of unique antispore monoclonal antibodies, we demonstrated that BclA is the immunodominant antigen on the B. anthracis spore surface. We also showed that the BclA protein and not a carbohydrate constituent directs the dominant immune response. In addition, the length of the central (GXX)(n) repeat region of BclA appears to be strain specific. Two other unique proteins, BxpA and BxpB, were identified. BxpA is unusually rich in Gln and Pro residues and contains several different tandem repeats, which also exhibit strain-specific variation. In addition, BxpA was found to be cleaved approximately in half. BxpB appears to be glycosylated or associated with glycosylated material and is encoded by a gene that (along with bclA) may be part of an exosporium genomic island. The other two proteins identified were alanine racemase and superoxide dismutase, both of which were reported to be associated with the surface of other Bacillus spores. Possible functions of the newly identified proteins are discussed.

Macrophage interactions

B. anthracis virulence is the sum of the contributions of factors involved in toxicity, growth and persistence in the host. Recent data has revealed that the interactions between B. anthracis and macrophage is central to the B. anthracis pathogenesis. This review presents and describes tactics by which B. anthracis not only overcomes and avoids macrophages but also perverts the host defense immune system and defense-related products to its advantage. The understanding of the complex network of such interactions is likely to allow new therapeutic and preventative strategies to be developed.

A collagen-like surface glycoprotein is a structural component of the Bacillus anthracis exosporium

Bacillus anthracis, the aetiological agent of anthrax, is a Gram-positive spore-forming bacterium. The exosporium is the outermost integument surrounding the mature spore. Here, we describe the purification and the characterization of an immunodominant protein of the spore surface. This protein was abundant, glycosylated and part of the exosporium. The amino-terminal sequence was determined and the corresponding gene was identified. It encodes a protein of 382 amino acid residues, the central part of which contains a region of GXX motifs presenting similarity to mammalian collagen proteins. Thus, this collagen-like surface protein was named BclA (for Bacillus collagen-like protein of anthracis). BclA was absent from vegetative cells; it was detected only in spores and sporulating cells. A potential promoter, dependent on the sigma factor sigma(K), which is required for a variety of events late in sporulation, was found upstream from the bclA gene. A bclA deletion mutant was constructed and analysed. Electron microscopy studies showed that BclA is a structural component of the filaments covering the outer layer of the exosporium.

Investigation of bacterial spore structure by high resolution solid-state nuclear magnetic resonance spectroscopy and transmission electron microscopy

High resolution solid-state nuclear magnetic resonance spectroscopy (NMR) in combination with transmission electron microscopy (TEM) of spores of Bacillus cereus, an outer coatless mutant B. subtilis 322, an inner coatless mutant B. subtilis 325 and of germinated spores of B. subtilis CMCC 604 were carried out. Structural differences in the coats, mainly protein of spores were reflected by NMR spectra which indicated also differences in molecular mobility of carbohydrates which was partially attributed to the cortex. Dipicolinic acid (DPA) of spores of B. cereus displayed a high degree of solid state order and may be crystalline. Heat activation was studied on spores of B. subtilis 357 lux + and revealed a structural change when analysed by TEM but this was not associated with increases in molecular mobility since no effects were measured by NMR.

Characterization of the exosporium of Bacillus cereus

Exosporium components from endospores of Bacillus cereus ATCC 10876 were purified and separated by gel electrophoresis. Several of the proteins for which N-terminal sequences were recovered were found to have homologues in protein databases which have been demonstrated to have enzymic activity in other organisms. Amongst these is a zinc metalloprotease, immune inhibitor A, already described in B. thuringiensis. This has been shown to be present in an active 73 kDa form on the exosporium of B. cereus. Other proteins associated with the exosporium include the molecular chaperone GroEL and a homologue of RocA (1-pyrroline-5-carboxylate dehydrogenase (EC 1.5.1.12)) of B. subtilis. Although these are unlikely to represent integral structural proteins of the exosporium, the observation that they are selectively present in the spore surface layer suggests that this layer may have functional significance.

Adjacent and divergently oriented operons under the control of the sporulation regulatory protein GerE in Bacillus subtilis

The DNA-binding protein GerE is the latest-acting regulatory protein in the mother cell line of gene expression during sporulation in Bacillus subtilis. GerE directs the transcription of several genes that encode structural components of the protein coat that encases the mature spore. We report on the identification and characterization of a cluster of additional genes whose transcription is dependent on GerE. These genes, which are located in the replication terminus region of the chromosome (181 degrees on the genetic map), are arranged in adjacent and divergently oriented operons called cgeAB and cgeCDE, which consist of two and at least three genes, respectively. CgeD, the product of the second member of the cgeCDE operon, is strikingly similar to the product of a B. subtilis gene (ipa-63d) of unknown function and is similar at its amino terminus to certain glycosyl transferases involved in polysaccharide biosynthesis. Strains with mutations in the cgeAB and cgeCDE operons produce spores with altered surface properties, on which basis we propose that proteins encoded by these operons influence maturation of the outermost layer of the spore, perhaps by glycosylation of coat proteins at the spore surface.

Septal membrane fusion--a pivotal event in bacterial spore formation?

Formation of the asymmetrically located septum divides sporulating bacilli into two distinct cells: the mother cell and the prespore. The rigidifying wall material in the septum is subsequently removed by autolysis. Examination of published electron micrographs indicates that the two septal membranes then fuse to form a single membrane. Membrane fusion would be expected to have profound consequences for subsequent development. For example, it is suggested that fusion activates processing of pro-sigma E to sigma E in the cytoplasm by exposing it to a membrane-bound processing enzyme. Asymmetry of the fused membrane could restrict processing to one face of the membrane and hence explain why sigma E is associated with transcription in the mother cell but not in the prespore. Asymmetry of the fused membrane might also provide a mechanism for restricting the activity of another factor, sigma F, to the prespore. Attachment of the flexible fused septal membrane to the condensing prespore nucleoid could help drive the engulfment of the prespore by the mother cell.

Isolation and properties of membranes from Bacillus megaterium spores

Membranes from dormant and heat-activated spores of Bacillus megaterium QM B1551 were isolated and purified by gentle lysis procedures followed by differential and sucrose density gradient centrifugations. The purified membranes were enriched for inner membranes and were characterized by their density and content of proteins, phospholipids, enzymes, cytochromes, and carotenoids. These purified spore membranes could be used to investigate their role in the triggering of germination.

Genetic aspects of bacterial endospore formation

Images

Structure and morphogenesis of the bacterial spore coat

Images

Properties of Bacillus cereus spore coat mutants

Two classes of spore mutants have been selected in Bacillus cereus T, those producing lysozyme-sensitive spores, and those producing spores dependent upon lysozyme for germination. One mutant from each class was studied in detail and found to have defective packing of the spore coat layers. The major spore coat poplypeptide appeared to be altered on the basis of gel electrophoretic profiles and/or peptide maps of half-syctine-containing peptides. The spores of the mutants of both classes were sensitive to lysozyme and failed to respond to the germinants L-alanine plus adenosine. The spores were also more sensitive to octanol than the parental strain, but contained the same amount of dipicolinic acid and were equally heat resistant. The reversion frequencies in both cases were consistent with an initial point mutation, suggesting that an alteration in the major coat polypeptide accounted for the phenotypic properties studied.

Ultrastructural studies of sporulation in Bacillus sphaericus

Spore septum formation in Bacillus sphaericus 9602 occurs 2 h after the end of exponential growth at one end of the vegetative cell, which retains a uniform diameter. The apparently rigid spore septum contains an inner cell wall layer which disappears when the sporulation septum "bulges" into the mother cell cytoplasm. This process occurs simultaneously with terminal swelling at the end of the cell containing the spore septum. It is suggested that the inner cell wall layer is peptidoglycan and that its dissolution and the terminal swelling are consequences of a localized autolysis. Engulfment of the forespore by membrane proliferation results in the production of a forespore surrounded by two flexible, closely apposed membranes. These membranes appear to become more rigid as a peptidoglycan-like layer appears between them, concomitant with the condensation of the forespore nucleoid into a crescent-shaped structure. After nuclear condensation, visible development of distinct cortex, primordial cell wall, and spore coat layers begin, and the forespore cytoplasm assumes an appearance similar to that of a refractile spore. The spore coats consist of an amorphous inner layer, a lamellar midlayer, and a structured outer layer. As cortex synthesis and spore coat assembly continue, exosporium development commences close to that portion of the mother cell plasma membrane which surrounds the forespore. The exosporium is lamellar and in tangential section is seen to have a hexagonal arrangement of subunits. The timing of these morphological events has the expected correlation with the appearance of unique enzyme activites required for cortex synthesis.