Physiological and biochemical analyses of FlgH, a lipoprotein forming the outer membrane L ring of the flagellar basal body of Salmonella typhimurium

Outer membrane protein of OmpF contributes to swimming motility, biofilm formation, osmotic response as well as the transcription of maltose metabolic genes in Citrobacter werkmanii

Bacterial outer membrane proteins (Omps) are essential for environmental sensing, stress responses, and substance transport. Our previous study discovered that OmpA contributes to planktonic growth, biocide resistance, biofilm formation, and swimming motility in Citrobacter werkmanii, whereas the molecular functions of OmpF in this strain are largely unknown. Thus, in this study, the ompF gene was firstly knocked out from the genome of C. werkmanii using a homologous recombination method, and its phenotypical alternations of ∆ompF were then thoroughly characterized using biochemical and molecular approaches with the parental wild type (WT) and complementary (∆ompF-com) strains. The results demonstrated that the swimming ability of ∆ompF on semi-solid plates was reduced compared to WT due to the down-regulation of flgC, flgH, fliK, and fliF. Meanwhile, ompF deletion reduces biofilm formation on both glass and polystyrene surfaces due to decreased cell aggregation. Furthermore, ompF inactivation induced different osmotic stress (carbon sources and metal ions) responses in its biofilms when compared to WT and ∆ompF-com. Finally, a total of 6 maltose metabolic genes of lamB, malE, malK, malG, malM, and malF were all up-regulated in ∆ompF. The gene knockout and HPLC results revealed that the MalEFGK2 cluster was primarily responsible for maltose transport in C. werkmanii. Furthermore, we discovered for the first time that the upstream promoter of OmpF and its transcription can be combined with and negatively regulated by MalT. Overall, OmpF plays a role in a variety of biochemical processes and molecular functions in C. werkmanii, and it may even act as a targeted site to inhibit biofilm formation.

Structural basis of assembly and torque transmission of the bacterial flagellar motor

The bacterial flagellar motor is a supramolecular protein machine that drives rotation of the flagellum for motility, which is essential for bacterial survival in different environments and a key determinant of pathogenicity. The detailed structure of the flagellar motor remains unknown. Here we present an atomic-resolution cryoelectron microscopy (cryo-EM) structure of the bacterial flagellar motor complexed with the hook, consisting of 175 subunits with a molecular mass of approximately 6.3 MDa. The structure reveals that 10 peptides protruding from the MS ring with the FlgB and FliE subunits mediate torque transmission from the MS ring to the rod and overcome the symmetry mismatch between the rotational and helical structures in the motor. The LP ring contacts the distal rod and applies electrostatic forces to support its rotation and torque transmission to the hook. This work provides detailed molecular insights into the structure, assembly, and torque transmission mechanisms of the flagellar motor.

The Tol-Pal System of Uropathogenic Escherichia coli Is Responsible for Optimal Internalization Into and Aggregation Within Bladder Epithelial Cells, Colonization of the Urinary Tract of Mice, and Bacterial Motility

Urinary tracts infection (UTI) caused by uropathogenic Escherichia coli (UPEC) is a common infectious disease. With the shortage of new antimicrobial agents, the increase in UPEC resistance to commonly used drugs, such as fluoroquinolones and β-lactams including carbapenems is a critical issue. UPEC invades urinary tract cells, where it aggregates, and subsequently, forms biofilm-like multicellular colonies termed intracellular bacterial communities (IBCs). This process allows the bacteria to establish infections and so may be a good potential target for new drugs to treat infections. Here, we show that deletion of the tolB gene, encoding a protein of the Tol-Pal system that was originally characterized as a protein complex for colicin uptake and maintenance of the outer membrane, decreases the level of bacterial internalization into and aggregation within cultured bladder epithelial cells and also inhibits the colonization of mice urinary tracts. The tolB mutant also exhibited defective motility because of impaired flagellum syntheses. The fliC and motA mutants, which are non-motile strains, also exhibited lower levels of bacterial internalization and aggregation than their wild-type parent. Additional deletion of tolB in the fliC mutant did not further decrease these, suggesting that the attenuated virulence of the tolB mutant is a result of defective motility. The tolA, tolQ, tolR, and pal mutants that lack other members of the Tol-Pal system also exhibited lower levels of motility and aggregation within bladder epithelial cells compared to their wild-type parent. These combined results suggest another role of the Tol-Pal system, i.e., that it is responsible for optimal internalization, aggregation followed by IBC formation within urinary tract cells, and bacterial motility.

Correct Sorting of Lipoproteins into the Inner and Outer Membranes of Pseudomonas aeruginosa by the Escherichia coli LolCDE Transport System

Biogenesis of the outer membrane of Gram-negative bacteria depends on dedicated macromolecular transport systems. The LolABCDE proteins make up the machinery for lipoprotein trafficking from the inner membrane (IM) across the periplasm to the outer membrane (OM). The Lol apparatus is additionally responsible for differentiating OM lipoproteins from those for the IM. In Enterobacteriaceae, a default sorting mechanism has been proposed whereby an aspartic acid at position +2 of the mature lipoproteins prevents Lol recognition and leads to their IM retention. In other bacteria, the conservation of sequences immediately following the acylated cysteine is variable. Here we show that in Pseudomonas aeruginosa, the three essential Lol proteins (LolCDE) can be replaced with those from Escherichia coli The P. aeruginosa lipoproteins MexA, OprM, PscJ, and FlgH, with different sequences at their N termini, were correctly sorted by either the E. coli or P. aeruginosa LolCDE. We further demonstrate that an inhibitor of E. coli LolCDE is active against P. aeruginosa only when expressing the E. coli orthologues. Our work shows that Lol proteins recognize a wide range of signals, consisting of an acylated cysteine and a specific conformation of the adjacent domain, determining IM retention or transport to the OM.IMPORTANCE Gram-negative bacteria build their outer membranes (OM) from components that are initially located in the inner membrane (IM). A fraction of lipoproteins is transferred to the OM by the transport machinery consisting of LolABCDE proteins. Our work demonstrates that the LolCDE complexes of the transport pathways of Escherichia coli and Pseudomonas aeruginosa are interchangeable, with the E. coli orthologues correctly sorting the P. aeruginosa lipoproteins while retaining their sensitivity to a small-molecule inhibitor. These findings question the nature of IM retention signals, identified in E. coli as aspartate at position +2 of mature lipoproteins. We propose an alternative model for the sorting of IM and OM lipoproteins based on their relative affinities for the IM and the ability of the promiscuous sorting machinery to deliver lipoproteins to their functional sites in the OM.

Nanoscale-length control of the flagellar driveshaft requires hitting the tethered outer membrane

The bacterial flagellum exemplifies a system where even small deviations from the highly regulated flagellar assembly process can abolish motility and cause negative physiological outcomes. Consequently, bacteria have evolved elegant and robust regulatory mechanisms to ensure that flagellar morphogenesis follows a defined path, with each component self-assembling to predetermined dimensions. The flagellar rod acts as a driveshaft to transmit torque from the cytoplasmic rotor to the external filament. The rod self-assembles to a defined length of ~25 nanometers. Here, we provide evidence that rod length is limited by the width of the periplasmic space between the inner and outer membranes. The length of Braun's lipoprotein determines periplasmic width by tethering the outer membrane to the peptidoglycan layer.

Structural flexibility of the periplasmic protein, FlgA, regulates flagellar P-ring assembly in Salmonella enterica

A periplasmic flagellar chaperone protein, FlgA, is required for P-ring assembly in bacterial flagella of taxa such as Salmonella enterica or Escherichia coli. The mechanism of chaperone-mediated P-ring formation is poorly understood. Here we present the open and closed crystal structures of FlgA from Salmonella enterica serovar Typhimurium, grown under different crystallization conditions. An intramolecular disulfide cross-linked form of FlgA caused a dominant negative effect on motility of the wild-type strain. Pull-down experiments support a specific protein-protein interaction between FlgI, the P-ring component protein, and the C-terminal domain of FlgA. Surface plasmon resonance and limited-proteolysis indicate that flexibility of the domain is reduced in the covalently closed form. These results show that the structural flexibility of the C-terminal domain of FlgA, which is related to the structural difference between the two crystal forms, is intrinsically associated with its molecular chaperone function in P-ring assembly.

Protein export according to schedule: architecture, assembly, and regulation of type III secretion systems from plant- and animal-pathogenic bacteria

Flagellar and translocation-associated type III secretion (T3S) systems are present in most gram-negative plant- and animal-pathogenic bacteria and are often essential for bacterial motility or pathogenicity. The architectures of the complex membrane-spanning secretion apparatuses of both systems are similar, but they are associated with different extracellular appendages, including the flagellar hook and filament or the needle/pilus structures of translocation-associated T3S systems. The needle/pilus is connected to a bacterial translocon that is inserted into the host plasma membrane and mediates the transkingdom transport of bacterial effector proteins into eukaryotic cells. During the last 3 to 5 years, significant progress has been made in the characterization of membrane-associated core components and extracellular structures of T3S systems. Furthermore, transcriptional and posttranscriptional regulators that control T3S gene expression and substrate specificity have been described. Given the architecture of the T3S system, it is assumed that extracellular components of the secretion apparatus are secreted prior to effector proteins, suggesting that there is a hierarchy in T3S. The aim of this review is to summarize our current knowledge of T3S system components and associated control proteins from both plant- and animal-pathogenic bacteria.

The non-flagellar type III secretion system evolved from the bacterial flagellum and diversified into host-cell adapted systems

Type 3 secretion systems (T3SSs) are essential components of two complex bacterial machineries: the flagellum, which drives cell motility, and the non-flagellar T3SS (NF-T3SS), which delivers effectors into eukaryotic cells. Yet the origin, specialization, and diversification of these machineries remained unclear. We developed computational tools to identify homologous components of the two systems and to discriminate between them. Our analysis of >1,000 genomes identified 921 T3SSs, including 222 NF-T3SSs. Phylogenomic and comparative analyses of these systems argue that the NF-T3SS arose from an exaptation of the flagellum, i.e. the recruitment of part of the flagellum structure for the evolution of the new protein delivery function. This reconstructed chronology of the exaptation process proceeded in at least two steps. An intermediate ancestral form of NF-T3SS, whose descendants still exist in Myxococcales, lacked elements that are essential for motility and included a subset of NF-T3SS features. We argue that this ancestral version was involved in protein translocation. A second major step in the evolution of NF-T3SSs occurred via recruitment of secretins to the NF-T3SS, an event that occurred at least three times from different systems. In rhizobiales, a partial homologous gene replacement of the secretin resulted in two genes of complementary function. Acquisition of a secretin was followed by the rapid adaptation of the resulting NF-T3SSs to multiple, distinct eukaryotic cell envelopes where they became key in parasitic and mutualistic associations between prokaryotes and eukaryotes. Our work elucidates major steps of the evolutionary scenario leading to extant NF-T3SSs. It demonstrates how molecular evolution can convert one complex molecular machine into a second, equally complex machine by successive deletions, innovations, and recruitment from other molecular systems.

Crystallization and preliminary X-ray analysis of FlgA, a periplasmic protein essential for flagellar P-ring assembly

Salmonella FlgA, a periplasmic protein essential for flagellar P-ring assembly, has been crystallized in two forms. The native protein crystallized in space group C222, with unit-cell parameters a = 107.5, b = 131.8, c = 49.4 Å, and diffracted to about 2.0 Å resolution (crystal form I). In this crystal, the asymmetric unit is likely to contain one molecule, with a solvent content of 66.8%. Selenomethionine-labelled FlgA protein crystallized in space group C222(1), with unit-cell parameters a = 53.2, b = 162.5, c = 103.5 Å, and diffracted to 2.7 Å resolution (crystal form II). In crystal form II, the asymmetric unit contained two molecules with a solvent content of 48.0%. The multiple-wavelength and single-wavelength anomalous dispersion methods allowed the visualization of the electron-density distributions of the form I and II crystals, respectively. The two maps suggested that FlgA is in two different conformations in the two crystals.

Structural diversity of bacterial flagellar motors

The bacterial flagellum is one of nature's most amazing and well-studied nanomachines. Its cell-wall-anchored motor uses chemical energy to rotate a microns-long filament and propel the bacterium towards nutrients and away from toxins. While much is known about flagellar motors from certain model organisms, their diversity across the bacterial kingdom is less well characterized, allowing the occasional misrepresentation of the motor as an invariant, ideal machine. Here, we present an electron cryotomographical survey of flagellar motor architectures throughout the Bacteria. While a conserved structural core was observed in all 11 bacteria imaged, surprisingly novel and divergent structures as well as different symmetries were observed surrounding the core. Correlating the motor structures with the presence and absence of particular motor genes in each organism suggested the locations of five proteins involved in the export apparatus including FliI, whose position below the C-ring was confirmed by imaging a deletion strain. The combination of conserved and specially-adapted structures seen here sheds light on how this complex protein nanomachine has evolved to meet the needs of different species.

The flagellar basal body-associated protein FlgT is essential for a novel ring structure in the sodium-driven Vibrio motor

In Vibrio alginolyticus, the flagellar motor can rotate at a remarkably high speed, ca. three to four times faster than the Escherichia coli or Salmonella motor. Here, we found a Vibrio-specific protein, FlgT, in the purified flagellar basal body fraction. Defects of FlgT resulted in partial Fla⁻ and Mot⁻ phenotypes, suggesting that FlgT is involved in formation of the flagellar structure and generating flagellar rotation. Electron microscopic observation of the basal body of ΔflgT cells revealed a smaller LP ring structure compared to the wild type, and most of the T ring was lost. His₆-tagged FlgT could be coisolated with MotY, the T-ring component, suggesting that FlgT may interact with the T ring composed of MotX and MotY. From these lines of evidence, we conclude that FlgT associates with the basal body and is responsible to form an outer ring of the LP ring, named the H ring, which can be distinguished from the LP ring formed by FlgH and FlgI. Vibrio-specific structures, e.g., the T ring and H ring might contribute the more robust motor structure compared to that of E. coli and Salmonella.

SciN is an outer membrane lipoprotein required for type VI secretion in enteroaggregative Escherichia coli

Enteroaggregative Escherichia coli (EAEC) is a pathogen implicated in several infant diarrhea or diarrheal outbreaks in areas of endemicity. Although multiple genes involved in EAEC pathogenesis have been identified, the overall mechanism of virulence is not well understood. Recently, a novel secretion system, called type VI secretion (T6S) system (T6SS), has been identified in EAEC and most animal or plant gram-negative pathogens. T6SSs are multicomponent cell envelope machines responsible for the secretion of at least two putative substrates, Hcp and VgrG. In EAEC, two copies of T6S gene clusters, called sci-1 and sci-2, are present on the pheU pathogenicity island. In this study, we focused our work on the sci-1 gene cluster. The Sci-1 apparatus is probably composed of all, or a subset of, the 21 gene products encoded on the cluster. Among these subunits, some are shared by all T6SSs identified to date, including a ClpV-type AAA(+) ATPase (SciG) and an IcmF (SciS) and an IcmH (SciP) homologue, as well as a putative lipoprotein (SciN). In this study, we demonstrate that sciN is a critical gene necessary for T6S-dependent secretion of the Hcp-like SciD protein and for biofilm formation. We further show that SciN is a lipoprotein, as shown by the inhibition of its processing by globomycin and in vivo labeling with [(3)H]palmitic acid. SciN is tethered to the outer membrane and exposed in the periplasm. Sequestration of SciN at the inner membrane by targeting the +2 residue responsible for lipoprotein localization (Gly2Asp) fails to complement an sciN mutant for SciD secretion and biofilm formation. Together, these results support a model in which SciN is an outer membrane lipoprotein exposed in the periplasm and essential for the Sci-1 apparatus function.

Flagellar motility in bacteria structure and function of flagellar motor

Bacterial flagella are filamentous organelles that drive cell locomotion. They thrust cells in liquids (swimming) or on surfaces (swarming) so that cells can move toward favorable environments. At the base of each flagellum, a reversible rotary motor, which is powered by the proton- or the sodium-motive force, is embedded in the cell envelope. The motor consists of two parts: the rotating part, or rotor, that is connected to the hook and the filament, and the nonrotating part, or stator, that conducts coupling ion and is responsible for energy conversion. Intensive genetic and biochemical studies of the flagellum have been conducted in Salmonella typhimurium and Escherichia coli, and more than 50 gene products are known to be involved in flagellar assembly and function. The energy-coupling mechanism, however, is still not known. In this chapter, we survey our current knowledge of the flagellar system, based mostly on studies from Salmonella, E. coli, and marine species Vibrio alginolyticus, supplemented with distinct aspects of other bacterial species revealed by recent studies.

Bringing order to a complex molecular machine: the assembly of the bacterial flagella

The bacterial flagellum is an example of elegance in molecular engineering. Flagella dependent motility is a widespread and evolutionarily ancient trait. Diverse bacterial species have evolved unique structural adaptations enabling them to migrate in their environmental niche. Variability exists in the number, location and configuration of flagella, and reflects unique adaptations of the microorganism. The most detailed analysis of flagellar morphogenesis and structure has focused on Escherichia coli and Salmonella enterica. The appendage assembles sequentially from the inner to the outer-most structures. Additionally the temporal order of gene expression correlates with the assembly order of encoded proteins into the final structure. The bacterial flagellar apparatus includes an essential basal body complex that comprises the export machinery required for assembly of the hook and flagellar filament. A review outlining the current understanding of the protein interactions that make up this remarkable structure will be presented, and the associated temporal genetic regulation will be briefly discussed.

The Escherichia coli MotAB Proton Channel Unplugged

The MotA and MotB proteins of Escherichia coli serve two functions. The MotA4MotB2 complex attaches to the cell wall via MotB to form the stator of the flagellar motor. The complex also couples the flow of hydrogen ions across the cell membrane to movement of the rotor. The TM3 and TM4 transmembrane helices of MotA and the single TM of MotB comprise the proton channel, which is inactive until the complex assembles into a motor. Here, we identify a segment of the MotB protein that acts as a plug to prevent premature proton flow. The plug is in the periplasm just C-terminal to the MotB TM. It consists of an amphipathic alpha helix flanked by Pro52 and Pro65. When MotA is over-expressed with MotB deleted for residues 51-70, a massive influx of protons acidifies the cytoplasm without significantly depleting the proton motive force. Either that acidification or some sequela thereof, such as potassium or water efflux from the cells, inhibits growth. The Pro residues and Ile58, Tyr61, and Phe62 are essential for plug function. Cys-substituted MotB proteins form a disulfide bond between the two plugs that hold the channels open, and the plugs function intrans within the MotA4MotB2 complex. We present a model in which the MotA4MotB2 complex forms in the bulk membrane. Before association with a motor, we propose the plugs insert into the cell membrane parallel with its periplasmic face and interfere with channel formation. When a complex incorporates into a motor, the plugs leave the membrane and associate with each other via their hydrophobic faces to hold the proton channel open.

Subcellular distribution of Plp-40, a lipoprotein in a serotype A strain of Pasteurella multocida

A 40-kDa lipoprotein (Plp-40) is expressed by serotype A strains of Pasteurella multocida in amounts which correlate with the amount of capsular material present. We hypothesized that Plp-40 is exposed at the outer surface of the outer membrane (OM) of the cell and is associated with the serotype A exopolysaccharide material. The objectives of the present study were to confirm the lipoprotein nature of Plp-40 and to determine its subcellular location. Plp-40 maturation was shown to be sensitive to globomycin, thereby confirming it to be a bacterial lipoprotein. Plp-40 was shown to be present in the OM fractions of P. multocida obtained by both sarkosyl extraction and sucrose density gradient centrifugation, as well as in capsule fractions obtained by either hyaluronidase treatment or warm buffer extraction. [(3)H]palmitic acid-labeled Plp-40 could be removed from the surface of whole cells by exposure to proteinase K. Autoradiography of (125)I-labeled cell surface proteins exhibited a 40-kDa band that was prominent in capsulated strains and greatly diminished in a noncapsulated strain. These results support the hypothesis that Plp-40 is a lipid-modified OM protein, which is exposed on the outer cell surface and is likely associated with serotype A extracellular polysaccharide.

Additive effect on intracellular growth by Legionella pneumophila Icm/Dot proteins containing a lipobox motif

Legionella pneumophila, the causative agent of Legionnaires' disease, utilizes a type IVB secretion system to subvert its host cells and grow intracellularly. This type IV secretion system is composed of 25 icm (or dot) genes that probably constitute parts of a secretion complex as well as more than 30 proteins that are translocated via this system into the host cells. Three of the Icm/Dot proteins (DotD, DotC, and IcmN) contain a lipobox motif at their N terminals and are predicted to be lipoproteins. Two of these lipoproteins (DotD and DotC) were found to be essential for intracellular growth in both HL-60-derived human macrophages and in the protozoan host Acanthamoeba castellanii, while the third lipoprotein (IcmN) was found to be partially required for intracellular growth only in A. castellanii. Mutation analysis of the lipobox cysteine residue, which was shown previously to be indispensable for the lipobox function, indicated that both DotC and DotD are partially functional without this conserved residue. Cysteine mutations in both DotC and DotD or in DotC together with an icmN deletion or in DotD together with an icmN deletion were found to be additive, indicating that each of these lipoproteins performs its function independently from the others. Analysis of the transcriptional regulation of both the dotDC operon and the icmN gene revealed that both had higher levels of expression at stationary phase which were partially dependent on the LetA regulator. Our results indicate that the lipoproteins of the L. pneumophila icm (or dot) system are essential components of the secretion system and that they perform their functions independently.

Protease susceptibility of the Caulobacter crescentus flagellar hook–basal body: a possible mechanism of flagellar ejection during cell differentiation

When motile swarmer cells of Caulobacter crescentus differentiate into sessile stalked cells, the flagellum is ejected. To elucidate the molecular mechanism of the flagellar ejection, flagellar hook–basal body (HBB) complexes from C. crescentus were purified and characterized. The purified HBBs were less stable against acidic pH or protease treatment than HBBs of Salmonella typhimurium, supporting the view that flagellar ejection from C. crescentus is initiated by destruction of the fragile basal structures. In addition, protease treatment of the purified flagella resulted in the specific digestion of the MS ring complex, revealing for the first time the intact structure of the whole rod.

Process of protein transport by the type III secretion system

The type III secretion system (TTSS) of gram-negative bacteria is responsible for delivering bacterial proteins, termed effectors, from the bacterial cytosol directly into the interior of host cells. The TTSS is expressed predominantly by pathogenic bacteria and is usually used to introduce deleterious effectors into host cells. While biochemical activities of effectors vary widely, the TTSS apparatus used to deliver these effectors is conserved and shows functional complementarity for secretion and translocation. This review focuses on proteins that constitute the TTSS apparatus and on mechanisms that guide effectors to the TTSS apparatus for transport. The TTSS apparatus includes predicted integral inner membrane proteins that are conserved widely across TTSSs and in the basal body of the bacterial flagellum. It also includes proteins that are specific to the TTSS and contribute to ring-like structures in the inner membrane and includes secretin family members that form ring-like structures in the outer membrane. Most prominently situated on these coaxial, membrane-embedded rings is a needle-like or pilus-like structure that is implicated as a conduit for effector translocation into host cells. A short region of mRNA sequence or protein sequence in effectors acts as a signal sequence, directing proteins for transport through the TTSS. Additionally, a number of effectors require the action of specific TTSS chaperones for efficient and physiologically meaningful translocation into host cells. Numerous models explaining how effectors are transported into host cells have been proposed, but understanding of this process is incomplete and this topic remains an active area of inquiry.

Process of protein transport by the type III secretion system

The type III secretion system (TTSS) of gram-negative bacteria is responsible for delivering bacterial proteins, termed effectors, from the bacterial cytosol directly into the interior of host cells. The TTSS is expressed predominantly by pathogenic bacteria and is usually used to introduce deleterious effectors into host cells. While biochemical activities of effectors vary widely, the TTSS apparatus used to deliver these effectors is conserved and shows functional complementarity for secretion and translocation. This review focuses on proteins that constitute the TTSS apparatus and on mechanisms that guide effectors to the TTSS apparatus for transport. The TTSS apparatus includes predicted integral inner membrane proteins that are conserved widely across TTSSs and in the basal body of the bacterial flagellum. It also includes proteins that are specific to the TTSS and contribute to ring-like structures in the inner membrane and includes secretin family members that form ring-like structures in the outer membrane. Most prominently situated on these coaxial, membrane-embedded rings is a needle-like or pilus-like structure that is implicated as a conduit for effector translocation into host cells. A short region of mRNA sequence or protein sequence in effectors acts as a signal sequence, directing proteins for transport through the TTSS. Additionally, a number of effectors require the action of specific TTSS chaperones for efficient and physiologically meaningful translocation into host cells. Numerous models explaining how effectors are transported into host cells have been proposed, but understanding of this process is incomplete and this topic remains an active area of inquiry.

The rotary motor of bacterial flagella

Flagellated bacteria, such as Escherichia coli, swim by rotating thin helical filaments, each driven at its base by a reversible rotary motor, powered by an ion flux. A motor is about 45 nm in diameter and is assembled from about 20 different kinds of parts. It develops maximum torque at stall but can spin several hundred Hz. Its direction of rotation is controlled by a sensory system that enables cells to accumulate in regions deemed more favorable. We know a great deal about motor structure, genetics, assembly, and function, but we do not really understand how it works. We need more crystal structures. All of this is reviewed, but the emphasis is on function.

Purification and characterization of the flagellar basal body of Rhodobacter sphaeroides

Flagellar hook-basal body (HBB) complexes were purified from Rhodobacter sphaeroides. The HBB was more acid labile but more heat stable than that of Salmonella species, and protein identification revealed that HBB components were expressed only from one of the two sets of flagellar gene clusters on the R. sphaeroides genome, under the heterotrophic growth conditions tested here.

Effects of lipoprotein biogenesis mutations on flagellar assembly in Salmonella

Flagellar assembly requires the expression of a large number of flagellum-specific genes. However, mutations in a number of other genes in Salmonella and Escherichia coli have been shown to have pleiotropic effects that affect flagellar assembly. FlgH (the L-ring subunit of the flagellar basal body) is a lipoprotein whose modification is important for L-ring assembly. We therefore tested whether the lack of motility of Salmonella mutants defective in lipoprotein biogenesis is a result of inability to modify FlgH. Our results show that temperature-sensitive apolipoprotein N-acyltransferase [lnt(Ts)] mutants are nonflagellate at 42 degrees C. However, the flagellar assembly defect occurs at a much earlier step in the pathway than L-ring assembly. These mutants failed to assemble even an MS ring, presumably because of the observed decrease in transcription of fliF. In contrast, temperature-sensitive diacylglycerol transferase [lgt(Ts)] mutants were motile at 42 degrees C, provided the strains carried an lpp (Braun lipoprotein) mutation to permit growth. We have isolated second-site mutants from an lgt(Ts) lpp(+) strain that grow but are nonflagellate at 42 degrees C. Thus, lipoprotein biogenesis is a factor that is important for flagellar assembly.

Proteolytic analysis of the FliH/FliI complex, the ATPase component of the type III flagellar export apparatus of Salmonella

The ATPase FliI of the Salmonella type III flagellar protein export apparatus is a 456 amino acid residue cytoplasmic protein consisting of two regions, an N-terminal flagellum-specific region and a C-terminal ATPase region. It forms a complex with a regulatory protein FliH in the cytoplasm. Multi-angle light-scattering studies indicate that FliH forms a homodimer, (FliH)2, and that FliH and FliI together form a heterotrimer, (FliH)2FliI. Mobility upon gel-filtration chromatography gives much higher apparent molecular masses for both species, whereas the mobility of FliI is normal. Sedimentation velocity measurements indicate that both (FliH)2 and the FliH/FliI complex are quite elongated. We have analyzed FliH, FliI and the FliH/FliI complex for proteolytic sensitivity. FliI was degraded by clostripain into two stable fragments, one of 48 kDa (FliI(CL48), missing the first seven amino acid residues) and the other of 46 kDa (FliI(CL46), missing the first 26 residues). Small amounts of two closely spaced 38 kDa fragments (FliI(CL38), missing the first 93 and 97 residues, respectively) were also detected. The FliH homodimer was insensitive to clostripain proteolysis and provided protection to FliI within the FliH/FliI complex. Neither FliI(CL48) nor FliI(CL46) could form a complex with FliH, demonstrating that the N terminus of FliI is essential for the interaction. ATP, AMP-PNP, and ADP bound forms of FliI within the FliH/FliI complex regained sensitivity to clostripain cleavage. Also, the sensitivity of the two FliI(CL38) cleavage sites was much greater in the ATP and AMP-PNP bound forms than in either the ADP bound form or nucleotide-free FliI. The ATPase domain itself was insensitive to clostripain cleavage. We suggest that the N-terminal flagellum-specific region of FliI is flexible and changes its conformation during the ATP hydrolysis cycle.

The role in flagellar rod assembly of the N-terminal domain of Salmonella FlgJ, a flagellum-specific muramidase

The C-terminal half of the Salmonella flagellar protein FlgJ has peptidoglycan hydrolyzing activity and it has been suggested that it is a flagellum-specific muramidase which locally digests the peptidoglycan layer to permit assembly of the rod structure to proceed through the periplasmic space. It was also suggested that FlgJ might be involved in rod formation itself, although there was no direct evidence for this. We purified basal body structures from SJW1437(flgJ) transformed with plasmids encoding various mutant FlgJ proteins and found that these basal bodies possessed the periplasmic P ring but lacked the outer membrane L ring; they also lacked a hook at their distal end. All of these mutant FlgJ proteins had an altered or missing C-terminal domain but had at least the first 151 amino acid residues of the N-terminal domain. Immunoblotting analysis of fractionated cell extracts revealed that a rod/hook export class protein, FlgD, was exported to the periplasm but not to the culture supernatant in these mutants. FlgJ was shown to physically interact with several proteins, and especially FliE and FlgB, which are believed to reside at the cell-proximal end of the rod. On the basis of these results, we conclude that the N-terminal 151 amino acid residues of FlgJ are directly involved in rod formation and that the muramidase activity of FlgJ, though needed for formation of the L ring and subsequent events such as hook formation, is not essential for rod or P ring formation. In contrast, muramidase activity alone does not support rod assembly.

The chaperone/usher pathways of Pseudomonas aeruginosa: identification of fimbrial gene clusters (cup) and their involvement in biofilm formation

Pseudomonas aeruginosa, an important opportunistic human pathogen, persists in certain tissues in the form of specialized bacterial communities, referred to as biofilm. The biofilm is formed through series of interactions between cells and adherence to surfaces, resulting in an organized structure. By screening a library of Tn5 insertions in a nonpiliated P. aeruginosa strain, we identified genes involved in early stages of biofilm formation. One class of mutations identified in this study mapped in a cluster of genes specifying the components of a chaperone/usher pathway that is involved in assembly of fimbrial subunits in other microorganisms. These genes, not previously described in P. aeruginosa, were named cupA1-A5. Additional chaperone/usher systems (CupB and CupC) have been also identified in the genome of P. aeruginosa PAO1; however, they do not appear to play a role in adhesion under the conditions where the CupA system is expressed and functions in surface adherence. The identification of these putative adhesins on the cell surface of P. aeruginosa suggests that this organism possess a wide range of factors that function in biofilm formation. These structures appear to be differentially regulated and may function at distinct stages of biofilm formation, or in specific environments colonized by this organism.

Analysis of the polar flagellar gene system of Vibrio parahaemolyticus

Vibrio parahaemolyticus has dual flagellar systems adapted for locomotion under different circumstances. A single, sheathed polar flagellum propels the swimmer cell in liquid environments. Numerous unsheathed lateral flagella move the swarmer cell over surfaces. The polar flagellum is produced continuously, whereas the synthesis of lateral flagella is induced under conditions that impede the function of the polar flagellum, e.g., in viscous environments or on surfaces. Thus, the organism possesses two large gene networks that orchestrate polar and lateral flagellar gene expression and assembly. In addition, the polar flagellum functions as a mechanosensor controlling lateral gene expression. In order to gain insight into the genetic circuitry controlling motility and surface sensing, we have sought to define the polar flagellar gene system. The hierarchy of regulation appears to be different from the polar system of Caulobacter crescentus or the peritrichous system of enteric bacteria but is pertinent to many Vibrio and Pseudomonas species. The gene identity and organization of 60 potential flagellar and chemotaxis genes are described. Conserved sequences are defined for two classes of polar flagellar promoters. Phenotypic and genotypic analysis of mutant strains with defects in swimming motility coupled with primer extension analysis of flagellar and chemotaxis transcription provides insight into the polar flagellar organelle, its assembly, and regulation of gene expression.

Constraints on models for the flagellar rotary motor

Most bacteria that swim are propelled by flagellar filaments, each driven at its base by a rotary motor embedded in the cell wall and cytoplasmic membrane. A motor is about 45 nm in diameter and made up of about 20 different kinds of parts. It is assembled from the inside out. It is powered by a proton (or in some species, a sodium-ion) flux. It steps at least 400 times per revolution. At low speeds and high torques, about 1000 protons are required per revolution, speed is proportional to protonmotive force, and torque varies little with temperature or hydrogen isotope. At high speeds and low torques, torque increases with temperature and is sensitive to hydrogen isotope. At room temperature, torque varies remarkably little with speed from about -100 Hz (the present limit of measurement) to about 200 Hz, and then it declines rapidly reaching zero at about 300 Hz. These are facts that motor models should explain. None of the existing models for the flagellar rotary motor completely do so.

Effect of hook subunit concentration on assembly and control of length of the flagellar hook of Salmonella

The flagellar hook of Salmonella is a filamentous polymer made up of subunits of the protein FlgE. Hook assembly is terminated when the length reaches about 55 nm. After our recent study of the effect of cellular levels of the hook length control protein FliK, we have now analyzed the effect of cellular levels of FlgE itself. When FlgE was overproduced in a wild-type strain, a fliC (flagellin) mutant, or a fliD (hook-associated protein 2 [HAP2], filament capping protein) mutant, the hooks remained at the wild-type length. In a fliK (hook length control protein) mutant, which produces long hooks (polyhooks), the overproduction of FlgE resulted in extraordinarily long hooks (superpolyhooks). In a flgK (HAP1, first hook-filament junction protein) mutant or a flgL (HAP3, second hook-filament junction protein) mutant, the overproduction of FlgE also resulted in longer than normal hooks. Thus, at elevated hook protein levels not only FliK but also FlgK and FlgL are necessary for the proper termination of hook elongation. When FlgE was severely underproduced, basal bodies without hooks were often observed. However, those hooks that were seen were of wild-type length, demonstrating that FlgE underproduction decreases the probability of the initiation of hook assembly but not the extent of hook elongation.

Interaction of FliI, a component of the flagellar export apparatus, with flagellin and hook protein

FliI is a key component of the flagellar export apparatus in Salmonella typhimurium. It catalyzes the hydrolysis of ATP which is necessary for flagellar assembly. Affinity blotting experiments showed that purified flagellin and hook protein, two flagellar axial proteins, interact specifically with FliI. The interaction of either of the two proteins with FliI, increases the intrinsic ATPase activity. The presence of either flagellin or hook protein stimulates ATPase activity in a specific and reversible manner. A Vmax of 0.12 nmol Pi min-1 microgram-1 and a Km for MgATP of 0.35 mM was determined for the unstimulated FliI; the presence of flagellin increased the Vmax to 0.35 nmol Pi min-1 microgram-1 and the Km for MgATP to 1.1 mM. The stimulation induced by the axial proteins was fully reversible suggesting a direct link between the catalytic activity of FliI and the export process.

The mxi-Spa type III secretory pathway of Shigella flexneri requires an outer membrane lipoprotein, MxiM, for invasin translocation

Invasion of epithelial cells by Shigella flexneri is mediated by a set of translocated bacterial invasins, the Ipa proteins, and its dedicated type III secretion system, called Mxi-Spa. We show here that mxiM, part of the mxi-spa locus in the S. flexneri virulence plasmid, encodes an indispensable type III secretion apparatus component, required for both Ipa translocation and tissue culture cell invasion. We demonstrated that mature MxiM, first identified as a putative lipoprotein, is lipidated in vivo. Consistent with features of known lipoproteins, MxiM (i) can be labeled with [3H]palmitate and [2-3H]glycerol, (ii) is associated with the cell envelope, (iii) is secreted independently of the type III pathway, and (iv) requires an intact lipoprotein modification and processing site for full activity. The lipidated form of MxiM was detected primarily in the outer membrane, where it establishes a peripheral association with the inner leaflet. Through analysis of subcellular Ipa distribution in a mxiM null mutant background, MxiM was found to be required for the assembly and/or function of outer, but not inner, membrane regions of Mxi-Spa. This function probably requires interactions with other Mxi-Spa subunits within the periplasmic space. We discuss implications of these findings with respect to the function of MxiM and the structure of Mxi-Spa as a whole.

Salmonella InvG forms a ring-like multimer that requires the InvH lipoprotein for outer membrane localization

Salmonella species translocate virulence effector proteins from the bacterial cytoplasm into mammalian host cells by means of a type III secretion apparatus, encoded by the pathogenicity island-1 (SPI-1). Little is known about the assembly and structure of this secretion apparatus, but the InvG protein is essential and could be an outer membrane secretion channel for the effector proteins. We observed that in recombinant Escherichia coli, the yield of InvG was enhanced by co-expression of InvH, and showed that mutation of invH decreased the level of InvG in wild-type Salmonella typhimurium. In E. coli, InvG alone was able to form an SDS-resistant multimer, but InvG localization to the outer membrane was dependent upon InvH, a lipoprotein itself located in the outer membrane, and no other SPI-1 specific protein. InvG targeted to the outer membrane by InvH became accessible to extracellular protease. InvG and InvH did not, however, appear to form a stable complex. Electron microscopy of InvG membrane protein purified from E. coli revealed that it forms an oligomeric ring-like structure with inner and outer diameters, 7 nm and 15 nm respectively.

Flk couples flgM translation to flagellar ring assembly in Salmonella typhimurium

The hook-basal body (HBB) is a key intermediate structure in the flagellar assembly pathway in Salmonella typhimurium. The FlgM protein inhibits the flagellum-specific transcription factor sigma28 in the absence of the intact HBB structure and is secreted out of the cell following HBB completion. The flk gene encodes a positive regulator of the activity of FlgM at an assembly step just prior to HBB completion: at the point of assembly of the P- and L-rings. FlgM inhibition of sigma28-dependent class 3 flagellar gene transcription was relieved in P- and L-ring assembly mutants (flgA, flgH, and flgI) by introduction of a null mutation in the flk gene (J. E. Karlinsey et al., J. Bacteriol. 179:2389-2400, 1997). In P- and L-ring mutant strains, recessive mutations in flk resulted in a reduction in intracellular FlgM levels to those seen in wild-type (Fla+) strains. The reduction in intracellular FlgM levels by mutations in the flk gene was concomitant with a 10-fold increase in transcription of the flgMN operon compared to that of the isogenic flk+ strain, while transcription of the flgAMN operon was unaffected. This was true for both direct measurement of the flgAMN and flgMN mRNA transcripts by RNase T2 protection assays and for lac operon fusions to either the flgAMN or flgMN promoter. Loss of Flk did not allow secretion of FlgM through basal-body structures lacking the P- and L-rings. Intracellular FlgM was stable to proteolysis, and turnover occurred primarily after export out of the cell. Loss of Flk did not result in increased FlgM turnover in either P- or L-ring mutant strains. With lacZ translational fusions to flgM, a null mutation in flk resulted in a significant reduction of flgM-lacZ mRNA translation, expressed from the class 3 flgMN promoter, in P- and L-ring mutant strains. No reduction in either flgAMN or flgMN mRNA stability was measured in the absence of Flk in Fla+, ring mutant, or HBB deletion strains. We conclude that the reduction in the intracellular FlgM levels by mutation in the flk gene is only at the level of flgM mRNA translation.

The Salmonella typhimurium InvH protein is an outer membrane lipoprotein required for the proper localization of InvG

The secretion of pathogenicity factors by Salmonella typhimurium is mediated by a type III secretion system that includes an outer membrane protein of the secretin family. Related secretins are also required for f1 phage assembly and type II secretion. When the C-terminal 43 amino acids of the S. typhimurium secretin InvG are added to f1 pIV, the chimeric f1 pIV-'InvG43 protein becomes dependent on the co-expression of another gene, invH, for function in phage assembly. [3H]-palmitic acid labelling, globomycin sensitivity and density gradient flotation were used to demonstrate that InvH is an outer membrane lipoprotein that is processed by signal peptidase II. A complex between chimeric f1 pIV-'InvG43 and InvH was demonstrated in vivo. InvH was shown to be required for the proper localization of InvG in the outer membrane and for the secretion of the virulence factor SipC. These results suggest that InvH and InvG are part of the functional outer membrane translocation complex in type III secretion systems.

Acylation of Escherichia coli hemolysin: a unique protein lipidation mechanism underlying toxin function

The pore-forming hemolysin (HlyA) of Escherichia coli represents a unique class of bacterial toxins that require a posttranslational modification for activity. The inactive protoxin pro-HlyA is activated intracellularly by amide linkage of fatty acids to two internal lysine residues 126 amino acids apart, directed by the cosynthesized HlyC protein with acyl carrier protein as the fatty acid donor. This action distinguishes HlyC from all bacterial acyltransferases such as the lipid A, lux-specific, and nodulation acyltransferases, and from eukaryotic transferases such as N-myristoyl transferases, prenyltransferases, and thioester palmitoyltransferases. Most lipids directly attached to proteins may be classed as N-terminal amide-linked and internal ester-linked acyl groups and C-terminal ether-linked isoprenoid groups. The acylation of HlyA and related toxins does not equate to these but does appear related to a small number of eukaryotic proteins that include inflammatory cytokines and mitogenic and cholinergic receptors. While the location and structure of lipid moieties on proteins vary, there are common effects on membrane affinity and/or protein-protein interactions. Despite being acylated at two residues, HlyA does not possess a "double-anchor" motif and does not have an electrostatic switch, although its dependence on calcium binding for activity suggests that the calcium-myristoyl switch may have relevance. The acyl chains on HlyA may provide anchorage points onto the surface of the host cell lipid bilayer. These could then enhance protein-protein interactions either between HlyA and components of a host signal transduction pathway to influence cytokine production or between HlyA monomers to bring about oligomerization during pore formation.

Enzymatic characterization of FliI. An ATPase involved in flagellar assembly in Salmonella typhimurium

FliI is a protein needed for flagellar assembly in Salmonella typhimurium. It shows sequence similarity to the catalytic beta subunit of the F0F1-ATPase and is even more closely related to putative ATPases in Type III bacterial secretory pathways. A His-tagged version of FliI, which was fully functional in complementation tests, was purified to homogeneity. It had an ATPase activity of 0.16 s-1 at 25 degrees C and pH 7, and a Km for ATP of 0.3 mM; Mg2+ was required. The activity was not affected by inhibitors of the F-, V- or P-type ATPases, or inhibitors of the Type I or Type II bacterial secretory pathways. Mutations K188I and Y363S decreased the ATPase activity about 100-fold, increased the Km about 10-fold, blocked flagellar assembly, and were dominant. Other FliI mutations that disrupted flagellar protein export were found near the N terminus; they permitted essentially wild-type ATPase activity, were not dominant, and showed a dosage-dependent phenotype. We propose that FliI has a C-terminal ATPase domain and an N-terminal domain that interacts with other components in the flagellum-specific export apparatus.