Lagging-strand replication from the ssoA origin of plasmid pMV158 in Streptococcus pneumoniae: in vivo and in vitro influences of mutations in two conserved ssoA regions

Staphylococcus equorum plasmid pKS1030-3 encodes auxiliary biofilm formation and trans-acting gene mobilization systems

The foodborne bacterium Staphylococcus equorum strain KS1030 harbours plasmid pSELNU1, which encodes a lincomycin resistance gene. pSELNU1 undergoes horizontal transfer between bacterial strains, thus spreading antibiotic resistance. However, the genes required for horizontal plasmid transfer are not encoded in pSELNU1. Interestingly, a relaxase gene, a type of gene related to horizontal plasmid transfer, is encoded in another plasmid of S. equorum KS1030, pKS1030-3. The complete genome of pKS1030-3 is 13,583 bp long and encodes genes for plasmid replication, biofilm formation (the ica operon), and horizontal gene transfer. The replication system of pKS1030-3 possesses the replication protein-encoding gene repB, a double-stranded origin of replication, and two single-stranded origins of replication. The ica operon, relaxase gene, and a mobilization protein-encoding gene were detected in pKS1030-3 strain-specifically. When expressed in S. aureus RN4220, the ica operon and relaxase operon of pKS1030-3 conferred biofilm formation ability and horizontal gene transfer ability, respectively. The results of our analyses show that the horizontal transfer of pSELNU1 of S. equorum strain KS1030 depends on the relaxase encoded by pKS1030-3, which is therefore trans-acting. Genes encoded in pKS1030-3 contribute to important strain-specific properties of S. equorum KS1030. These results could contribute to preventing the horizontal transfer of antibiotic resistance genes in food.

Molecular characterization of five novel plasmids from Enterococcus italicus SD1 isolated from fermented milk: An insight into understanding plasmid incompatibility

Enterococcal plasmids have attracted considerable interest because of their indispensable role in the pathogenesis and dissemination of multidrug-resistance. In this work, five novel plasmids pSRB2, pSRB3, pSRB4, pSRB5 and pSRB7 have been identified and characterised, coexisting in Eneterococcus italicus SD1 from fermented milk. The plasmids pSRB2, pSRB3 and pSRB5 were found to replicate via theta mode of replication while pSRB4 and pSRB7 were rolling-circle plasmids. Comparative analysis of SD1-plasmids dictated that the plasmids are mosaic with novel architecture. Plasmids pSRB2 and pSRB5 are comprised of a typical iteron-based class-A theta type origin of replication, whereas pSRB3 has a Class-D theta type replication origin like pAMβ1. The plasmids pSRB4 and pSRB7 shared similar ori as in pWV01. The SD1 class-A theta type plasmids shared significant homology between their replication proteins with differences in their DNA-binding domain and comprises of distinct iterons. The differences in their iterons and replication proteins restricts the "handcuff" formation for inhibition of plasmid replication, rendering to their compatibility to coexist. Similarly, for SD1 rolling circle plasmids the differences in the replication protein binding site in the origin and the replication protein supports their coexistence by inhibiting the crosstalk between the origins and replication proteins. The phylogenetic tree of their replication proteins revealed their distant kinship. The results indicate that the identified plasmids are unique to E. italicus SD1, providing further opportunities to study their utility in designing multiple gene expression systems for the simultaneous production of proteins in enterococci with the renewed concept of plasmid incompatibility.

Plasmid-Based Gene Expression Systems for Lactic Acid Bacteria: A Review

Lactic acid bacteria (LAB) play a very vital role in food production, preservation, and as probiotic agents. Some of these species can colonize and survive longer in the gastrointestinal tract (GIT), where their presence is crucially helpful to promote human health. LAB has also been used as a safe and efficient incubator to produce proteins of interest. With the advent of genetic engineering, recombinant LAB have been effectively employed as vectors for delivering therapeutic molecules to mucosal tissues of the oral, nasal, and vaginal tracks and for shuttling therapeutics for diabetes, cancer, viral infections, and several gastrointestinal infections. The most important tool needed to develop genetically engineered LABs to produce proteins of interest is a plasmid-based gene expression system. To date, a handful of constitutive and inducible vectors for LAB have been developed, but their limited availability, host specificity, instability, and low carrying capacity have narrowed their spectrum of applications. The current review discusses the plasmid-based vectors that have been developed so far for LAB; their functionality, potency, and constraints; and further highlights the need for a new, more stable, and effective gene expression platform for LAB.

The Facts and Family Secrets of Plasmids That Replicate via the Rolling-Circle Mechanism

Plasmids are self-replicative DNA elements that are transferred between bacteria. Plasmids encode not only antibiotic resistance genes but also adaptive genes that allow their hosts to colonize new niches. Plasmid transfer is achieved by conjugation (or mobilization), phage-mediated transduction, and natural transformation. Thousands of plasmids use the rolling-circle mechanism for their propagation (RCR plasmids). They are ubiquitous, have a high copy number, exhibit a broad host range, and often can be mobilized among bacterial species. Based upon the replicon, RCR plasmids have been grouped into several families, the best known of them being pC194 and pUB110 (Rep_1 family), pMV158 and pE194 (Rep_2 family), and pT181 and pC221 (Rep_trans family). Genetic traits of RCR plasmids are analyzed concerning (i) replication mediated by a DNA-relaxing initiator protein and its interactions with the cognate DNA origin, (ii) lagging-strand origins of replication, (iii) antibiotic resistance genes, (iv) mobilization functions, (v) replication control, performed by proteins and/or antisense RNAs, and (vi) the participating host-encoded functions. The mobilization functions include a relaxase initiator of transfer (Mob), an origin of transfer, and one or two small auxiliary proteins. There is a family of relaxases, the MOB_V family represented by plasmid pMV158, which has been revisited and updated. Family secrets, like a putative open reading frame of unknown function, are reported. We conclude that basic research on RCR plasmids is of importance, and our perspectives contemplate the concept of One Earth because we should incorporate bacteria into our daily life by diminishing their virulence and, at the same time, respecting their genetic diversity.

Transfer of a mobile Staphylococcus saprophyticus plasmid isolated from fermented seafood that confers tetracycline resistance

The complete nucleotide sequence of a tetracycline-resistance gene (tetK)-carrying plasmid from a Staphylococcus saprophyticus isolate from jeotgal, a Korean high-salt-fermented seafood, was determined. The plasmid, designated pSSTET1, was 4439 bp in length and encoded typical elements found in plasmids that replicate via a rolling-circle mechanism, including the replication protein gene (rep), a double-stranded origin of replication, a single-stranded origin of replication, and a counter-transcribed RNA sequence. Additionally, the plasmid recombination enzyme gene (pre), which may be involved in inter-plasmid recombination and conjugation, was found. Each gene exhibited >94% sequence identity with those harbored in other Staphylococcus species. pSSTET1 was conditionally transferred to Staphylococcus species in a host-dependent manner and transferred to an Enterococcus faecalis strain in vitro. Antibiotic susceptibility of the transconjugants was host-dependent and transconjugants maintained a tetracycline-resistant phenotype in the absence of selective pressure over 100 generations.

Plasmid Rolling-Circle Replication

Plasmids are DNA entities that undergo controlled replication independent of the chromosomal DNA, a crucial step that guarantees the prevalence of the plasmid in its host. DNA replication has to cope with the incapacity of the DNA polymerases to start de novo DNA synthesis, and different replication mechanisms offer diverse solutions to this problem. Rolling-circle replication (RCR) is a mechanism adopted by certain plasmids, among other genetic elements, that represents one of the simplest initiation strategies, that is, the nicking by a replication initiator protein on one parental strand to generate the primer for leading-strand initiation and a single priming site for lagging-strand synthesis. All RCR plasmid genomes consist of a number of basic elements: leading strand initiation and control, lagging strand origin, phenotypic determinants, and mobilization, generally in that order of frequency. RCR has been mainly characterized in Gram-positive bacterial plasmids, although it has also been described in Gram-negative bacterial or archaeal plasmids. Here we aim to provide an overview of the RCR plasmids' lifestyle, with emphasis on their characteristic traits, promiscuity, stability, utility as vectors, etc. While RCR is one of the best-characterized plasmid replication mechanisms, there are still many questions left unanswered, which will be pointed out along the way in this review.

Characterization of Mobile Staphylococcus equorum Plasmids Isolated from Fermented Seafood That Confer Lincomycin Resistance

The complete nucleotide sequences of lincomycin-resistance gene (lnuA)-containing plasmids in Staphylococcus equorum strains isolated from the high-salt-fermented seafood jeotgal were determined. These plasmids, designated pSELNU1–3, are 2638-bp long, have two polymorphic sites, and encode typical elements found in plasmids that replicate via a rolling-circle mechanism including the replication protein gene (rep), a double-stranded origin of replication, a single-stranded origin of replication, and counter-transcribed RNA sequence, as well as lnuA. Plasmid sequences exhibit over 83% identity to other Staphylococcus plasmids that harbor rep and lnuA genes. Further, three pairs of identified direct repeats may be involved in inter-plasmid recombination. One plasmid, pSELNU1, was successfully transferred to other Staphylococcus species, Enterococcus faecalis, and Tetragenococcus halophilus in vitro. Antibiotic susceptibility of the transconjugants was host-dependent, and transconjugants maintained a lincomycin resistance phenotype in the absence of selective pressure over 60 generations.

Bringing them together: plasmid pMV158 rolling circle replication and conjugation under an evolutionary perspective

Rolling circle-replicating plasmids constitute a vast family that is particularly abundant in, but not exclusive of, Gram-positive bacteria. These plasmids are constructed as cassettes that harbor genes involved in replication and its control, mobilization, resistance determinants and one or two origins of lagging strand synthesis. Any given plasmid may contain all, some, or just only the replication cassette. We discuss here the family of the promiscuous streptococcal plasmid pMV158, with emphasis on its mobilization functions: the product of the mobM gene, prototype of the MOBV relaxase family, and its cognate origin of transfer, oriT. Amongst the subfamily of MOBV1 plasmids, three groups of oriT sequences, represented by plasmids pMV158, pT181, and p1414 were identified. In the same subfamily, we found four types of single-strand origins, namely ssoA, ssoU, ssoW, and ssoT. We found that plasmids of the rolling-circle Rep_2 family (to which pMV158 belongs) are more frequently found in Lactobacillales than in any other bacterial order, whereas Rep_1 initiators seemed to prefer hosts included in the Bacillales order. In parallel, MOBV1 relaxases associated with Rep_2 initiators tended to cluster separately from those linked to Rep_1 plasmids. The updated inventory of MOBV1 plasmids still contains exclusively mobilizable elements, since no genes associated with conjugative transfer (other than the relaxase) were detected. These plasmids proved to have a great plasticity at using a wide variety of conjugative apparatuses. The promiscuous recognition of non-cognate oriT sequences and the role of replication origins for lagging-strand origin in the host range of these plasmids are also discussed.

Identification of the region required for maintaining pHW126 in its monomeric form

The pHW126-like plasmids are a recently discovered small group of cryptic plasmids replicating by the rolling circle mode. The replication origin of pHW126 consists of a conserved stretch, four perfect direct repeats and a so-called accessory region. The latter increases plasmid stability but is not absolutely necessary for replication. Here, we report that deletion of the accessory region causes rapid multimerization of pHW126. While the number of pHW126-units per cell remains constant, the number of physically independent plasmid molecules is reduced by approximately 40%, rendering random distribution to daughter cells less effective. A conserved inverted repeat within the accessory region could be identified as a sequence necessary for maintaining pHW126 in its monomeric form. A mutant version of pHW126 lacking this inverted repeat could be rescued by placing the single-strand initiation site (ssi) of pHW15 on the plus strand, while including the ssi in the opposite direction had no effect. Thus, our data provide evidence that multimer formation is, besides copy number reduction and ssDNA accumulation, an additional means how loss of a mechanism ensuring efficient lagging strand synthesis may cause destabilization of rolling circle plasmids.

Folded DNA in action: hairpin formation and biological functions in prokaryotes

Structured forms of DNA with intrastrand pairing are generated in several cellular processes and are involved in biological functions. These structures may arise on single-stranded DNA (ssDNA) produced during replication, bacterial conjugation, natural transformation, or viral infections. Furthermore, negatively supercoiled DNA can extrude inverted repeats as hairpins in structures called cruciforms. Whether they are on ssDNA or as cruciforms, hairpins can modify the access of proteins to DNA, and in some cases, they can be directly recognized by proteins. Folded DNAs have been found to play an important role in replication, transcription regulation, and recognition of the origins of transfer in conjugative elements. More recently, they were shown to be used as recombination sites. Many of these functions are found on mobile genetic elements likely to be single stranded, including viruses, plasmids, transposons, and integrons, thus giving some clues as to the manner in which they might have evolved. We review here, with special focus on prokaryotes, the functions in which DNA secondary structures play a role and the cellular processes giving rise to them. Finally, we attempt to shed light on the selective pressures leading to the acquisition of functions for DNA secondary structures.

Lagging-strand DNA replication origins are required for conjugal transfer of the promiscuous plasmid pMV158

The promiscuous streptococcal plasmid pMV158 is mobilizable by auxiliary plasmids and replicates by the rolling-circle mechanism in a variety of bacterial hosts. The plasmid has two lagging-strand origins, ssoA and ssoU, involved in the conversion of single-stranded DNA intermediates into double-stranded plasmid DNA during vegetative replication. Transfer of the plasmid also would involve conversion of single-stranded DNA molecules into double-stranded plasmid forms in the recipient cells by conjugative replication. To test whether lagging-strand origins played a role in horizontal transfer, pMV158 derivatives defective in one or in both sso's were constructed and tested for their ability to colonize new hosts by means of intra- and interspecies mobilization. Whereas either sso supported transfer between strains of Streptococcus pneumoniae, only plasmids that had an intact ssoU could be efficiently mobilized from S. pneumoniae to Enterococcus faecalis. Thus, it appears that ssoU is a critical factor for pMV158 promiscuity and that the presence of a functional sso plays an essential role in plasmid transfer.

Molecular organization of plasmid pER13 in Streptococcus thermophilus

Molecular features of the 4139-bp plasmid pER13 found in the dairy fermentation bacterium Streptococcus thermophilus ST113 include five open reading frames (ORFs). ORF1, ORF2 and ORF3 encode proteins for transcriptional repression (CopG), replication (RepB) and mobilization (Mob) that share homology with corresponding proteins of the pMV158 plasmid family, while ORF4 and ORF5 encode putative proteins with unspecified functions. Sequence homologies shared with plasmids found in group B and group D streptococci imply the possibility for genetic exchange with the food-grade S. thermophilus. The structural features of pER13 may be useful in designing strategies for gene transfer in lactic fermentation bacteria.

Characterization and application of a rolling-circle-type plasmid from Cupriavidus taiwanensis

Two small cryptic plasmids, pTJ86-1 and pTJ86-2, identified in Cupriavidus taiwanensis strain TJ86, were detected and characterized. Complete sequencing of pTJ86-1 and pTJ86-2 revealed these plasmids to be 2221 and 2229bp in length with a GC content of 61.7% and 61.6%, respectively. Both plasmids harbored four open reading frames (ORF1, 2, 3 and 4). Only the predicted ORF1 gene product of both plasmids (436 amino acids) was homologous to Rep proteins previously identified on plasmids replicated using a rolling-circle replication (RCR). A double-stranded origin (DSO) of replication, highly conserved in the group III (cluster III) RCR plasmids, was identified and located immediately upstream of this putative Rep gene. In addition, both plasmids contained a putative single-stranded origin of replication (SSO) exhibiting similarity to the ssoA-type. Detection of single-stranded plasmid DNA by Southern analysis and S1 nuclease digestion confirmed that the cryptic plasmid replicated via an RCR mechanism. A potential shuttle vector, pS4-tet(R), was constructed by ligation of pTJ86-1 to the cloning vector pBluescript II SK(+) along with the insertion of a tetracycline-resistance (tet(R)) gene. It was successfully used for the transformation of genera Burkholderia and Cupriavidus.

DNA sequence analysis of a small cryptic plasmid from Lactococcus lactis subsp. lactis M14

A small plasmid designated pAR141 was isolated from Lactococcus lactis subsp. lactis M14 and its complete 1,594 base pair nucleotide sequence was determined. Analysis of the sequence indicated that this plasmid does not carry any industrially important determinants besides the elements involved in plasmid replication and control. The transcriptional repressor CopG and replication initiation protein RepB appeared as a single operon. A small countertranscribed RNA (ctRNA) coding region was found between the copG and repB genes. The double strand origin (dso) and single strand origin (sso) of rolling circle replicating (RCR) plasmids were also identified in pAR141, suggesting that this plasmid replicates by rolling circle (RC) mode. This observation was supported by S1 nuclease and Southern hybridization analyses.

Plasmid rolling-circle replication: highlights of two decades of research

This review provides a historical perspective of the major findings that contributed to our current understanding of plasmid rolling-circle (RC) replication. Rolling-circle-replicating (RCR) plasmids were discovered approximately 20 years ago. The first of the RCR plasmids to be identified were native to Gram-positive bacteria, but later such plasmids were also identified in Gram-negative bacteria and in archaea. Further studies revealed mechanistic similarities in the replication of RCR plasmids and the single-stranded DNA bacteriophages of Escherichia coli, although there were important differences as well. Three important elements, a gene encoding the initiator protein, the double strand origin, and the single strand origin, are contained in all RCR plasmids. The initiator proteins typically contain a domain involved in their sequence-specific binding to the double strand origin and a domain that nicks within the double strand origin and generates the primer for DNA replication. The double strand origins include the start-site of leading strand synthesis and contain sequences that are bound and nicked by the initiator proteins. The single strand origins are required for synthesis of the lagging strand of RCR plasmids. The single strand origins are non-coding regions that are strand-specific, and contain extensive secondary structures. This minireview will highlight the major findings in the study of plasmid RC replication over the past twenty years. Regulation of replication of RCR plasmids will not be included since it is the subject of another review.

Complete sequence and structural organization of pFL5 and pFL7, two cryptic plasmids from Bacillus licheniformis

The complete nucleotide sequences of two plasmids, pFL5 and pFL7, isolated from soil bacteria, Bacillus licheniformis FL5 and FL7, have been determined. The plasmids pFL5 and pFL7 were analyzed and found to be 9150 and 7853 bp in size with a G+C content of 41.0 and 43.6 mol%, respectively. Computer assisted analysis of sequence data revealed 11 possible ORFs in pFL5, four of which could be assigned no function from homology searches. Instead, eight putative ORFs were identified in pFL7, two of which appeared to have no biological function. All the ORFs were preceded by a ribosome binding site. The ORFs 9.5 and 6.7, each of 340 amino acids, were postulated to encode a replication protein similar to known replication proteins of rolling circle replicons, particularly those of the pC194 family. The structural organization of the two pFL plasmids is similar to the pTA plasmids family, with only a few putative coding regions that cannot be attributed to these plasmid backbone genes. In contrast to pTA plasmids, the majority of the genes have an orientation of transcription opposite to the direction of replication. The identified probable sso sequences seem to belong to a different group of those found in Bacillus plasmids; in fact, a significant level of homology was found with ssoA group sequences. These plasmids seem to be related to plasmids identified within the Bacillus subtilis group, confirming the low-level diversity among these replicons.

The patchwork nature of rolling-circle plasmids: comparison of six plasmids from two distinct Bacillus thuringiensis serotypes

Bacillus thuringiensis, the entomopathogenic bacteria from the Bacillus cereus group, harbors numerous extrachromosomal molecules whose sizes vary from 2 to more than 200kb. Apart from the genes coding for the biopesticide delta-endotoxins located on large plasmids, little information has been obtained on these plasmids and their contribution to the biology of their host. In this paper, we embarked on a detailed comparison of six small rolling-circle replicating (RCR) plasmids originating from two major B. thuringiensis strains. The complete nucleotide sequences of plasmid pGI1, pGI2, pGI3, pTX14-1, pTX14-2, and pTX14-3 have been obtained and compared. Replication functions, comprising, for each plasmid, the gene encoding the Rep-protein, double-strand origin of replication (dso), single-strand origin of replication (sso), have been identified and analyzed. Two new families, or homology groups, of RCR plasmids originated from the studies of these plasmids (Group VI based on pGI3 and Group VII based on pTX14-3). On five of the six plasmids, loci involved in conjugative mobilization (Mob-genes and origin of transfer (oriT)) were identified. Plasmids pTX14-1, pTX14-2, and pTX14-3 each harbor an ORF encoding a polypeptide containing a central domain with repetitive elements similar to eukaryotic collagen (Gly-X-Y triplets). These genes were termed bcol for Bacillus-collagen-like genes.

DNA–Protein Interactions during the Initiation and Termination of Plasmid pT181 Rolling-Circle Replication

Initiation of DNA replication requires the generation of a primer at the origin of replication that can be utilized by a DNA polymerase for DNA synthesis. This can be accomplished by several means, including the synthesis of an RNA primer by a DNA primase or RNA polymerase, by nicking of one strand of the DNA to generate a free 3'-OH end that can be used as a primer, and by the utilization of the OH group present in an amino acid such as serine within an initiation protein as a primer. Furthermore, some single-stranded DNA genomes can utilize a snap-back 3'-OH end generated due to self-complementarity as a primer for DNA replication. The different modes of initiation require the generation of highly organized DNA-protein complexes at the origin that trigger the initiation of replication. A large majority of small, multicopy plasmids of Gram-positive bacteria and some of Gram-negative bacteria replicate by a rolling-circle (RC) mechanism (for previous reviews, see Refs.). More than 200 rolling-circle replicating (RCR) plasmids have so far been identified and, based on sequence homologies in their replication regions, can be grouped into approximately seven families (Refs., and http://www.essex.ac.uk/bs/staff/osborn/DPR-home.htm). This review will focus on plasmids of the pT181 family that replicate by an RC mechanism. So far, approximately 25 plasmids have been identified as belonging to this family based on the sequence homology in their double-strand origins (dsos) and the genes encoding the initiator (Rep) proteins. This review will highlight our current understanding of the structural features of the origins of replication, and the DNA-protein and protein-protein interactions that result in the generation of a replication-initiation complex that triggers replication. It will discuss the molecular events that result in the precise termination of replication once the leading-strand DNA synthesis has been completed. This review will also discuss the various biochemical activities of the initiator proteins encoded by the plasmids of the pT181 family and the mechanism of inactivation of the Rep activity after supporting one round of leading-strand replication. Finally, the review will outline the mechanism of replication of the lagging strand of the pT181 plasmid as well as the limited information that is available on the role of host proteins in pT181 leading- and lagging-strand replication.

Sinorhizobium meliloti plasmid pRm1132f replicates by a rolling-circle mechanism

pRm1132f isolated from Sinorhizobium meliloti is a group III rolling-circle-replicating (RCR) plasmid. At least seven of eight open reading frames in the nucleotide sequence represented coding regions. The minimal replicon contained a rep gene and single- and double-stranded origins of replication. Detection of single-stranded plasmid DNA confirmed that pRm1132f replicated via an RCR mechanism.

A functional lagging strand origin does not stabilize plasmid pMV158 inheritance in Escherichia coli

Plasmid rolling circle replication generates single-stranded DNA intermediates. The intracellular amount of these molecules depends upon the efficiency of the conversion of single-stranded into double-stranded plasmid forms, that is, the functionality of the lagging strand origin (sso). The broad-host-range streptococcal plasmid pMV158 harbors two different ssos, both of which function efficiently in Streptococcus pneumoniae but poorly in Escherichia coli. Plasmid pMV158 is stably inherited in the pneumococcal host, but it is unstable in E. coli. A pMV158 derivative lacking its two ssos is unstable in both strains. We have cloned into this derivative the coliphage f1 lagging strand origin. Whereas the f1 sso was fully functional in E. coli, it did not show any activity in S. pneumoniae, a bacteria closely related to the pMV158 natural host. The presence of the f1 sso did not stabilize pMV158 inheritance in either the gram-positive or the gram-negative host.

Molecular analysis of pDL10 from Acidianus ambivalens reveals a family of related plasmids from extremely thermophilic and acidophilic archaea

The 7598-bp plasmid pDL10 from the extremely thermophilic, acidophilic, and chemolithoautotrophic Archaeon Acidianus ambivalens was sequenced. It contains 10 open reading frames (ORFs) organized in five putative operons. The deduced amino acid sequence of the largest ORF (909 aa) showed similarity to bacterial Rep proteins known from phages and plasmids with rolling-circle (RC) replication. From the comparison of the amino acid sequences, a novel family of RC Rep proteins was defined. The pDL10 Rep protein shared 45-80% identical residues with homologous protein genes encoded by the Sulfolobus islandicus plasmids pRN1 and pRN2. Two DNA regions capable of forming extended stem-loop structures were also conserved in the three plasmids (48-69% sequence identity). In addition, a putative plasmid regulatory protein gene (plrA) was found, which was conserved among the three plasmids and the conjugative Sulfolobus plasmid pNOB8. A homolog of this gene was also found in the chromosome of S. solfataricus. Single-stranded DNA of both pDL10 strands was detected with a mung bean nuclease protection assay using PCR detection of protected fragments, giving additional evidence for an RC mechanism of replication.

Characterization of a single-strand origin, ssoU, required for broad host range replication of rolling-circle plasmids

Single-stranded DNA (ssDNA) promoters are the key components of the single-strand origins (ssos) of replication of rolling-circle (RC) replicating plasmids. The recognition of this origin by the host RNA polymerase and the synthesis of a short primer RNA are critical for initiation of lagging-strand synthesis. This step is thought to be a limiting factor for the establishment of RC plasmids in a broad range of bacteria, because most of the ssos described are fully active only in their natural hosts. A special type of sso, the ssoU, is unique in the sense that it can be efficiently recognized in a number of different Gram-positive hosts. We have experimentally deduced the folded structure and characterized the ssDNA promoter present within the ssoU using P1 nuclease digestion and DNase I protection assays with the Bacillus subtilis and Staphylococcus aureus RNA polymerases. We have also identified the RNA products synthesized from this ssDNA promoter and mapped the initiation points of lagging-strand synthesis in vivo from ssoU-containing plasmids. Through gel mobility shift experiments, we have found that ssDNA containing the ssoU sequence can efficiently interact with the RNA polymerase from two different Gram-positive bacteria, S. aureus and B. subtilis. We have also realigned the narrow and broad host range sso sequences of RC plasmids, and found that they contain significant homology. Our data support the notion that the strength of the RNA polymerase-ssoU interaction may be the critical factor that confers the ability on the ssoU to be fully functional in a broad range of bacteria.

Lagging strand replication of rolling-circle plasmids: specific recognition of the ssoA-type origins in different gram-positive bacteria

Many bacterial plasmids replicate by a rolling-circle mechanism that involves the generation of single-stranded DNA (ssDNA) intermediates. Replication of the lagging strand of such plasmids initiates from their single strand origin (sso). Many different types of ssos have been identified. One group of ssos, termed ssoA, which have conserved sequence and structural features, function efficiently only in their natural hosts in vivo. To study the host specificity of sso sequences, we have analyzed the functions of two closely related ssoAs belonging to the staphylococcal plasmid pE194 and the streptococcal plasmid pLS1 in Staphylococcus aureus. The pLS1 ssoA functioned poorly in vivo in S. aureus as evidenced by accumulation of high levels of ssDNA but supported efficient replication in vitro in staphylococcal extracts. These results suggest that one or more host factors that are present in sufficient quantities in S. aureus cell-free extracts may be limiting in vivo. Mapping of the initiation points of lagging strand synthesis in vivo and in vitro showed that DNA synthesis initiates from specific sites within the pLS1 ssoA. These results demonstrate that specific initiation of replication can occur from the pLS1 ssoA in S. aureus although it plays a minimal role in lagging strand synthesis in vivo. Therefore, the poor functionality of the pLS1 in vivo in a nonnative host is caused by the low efficiency rather than a lack of specificity of the initiation process. We also have identified ssDNA promoters and mapped the primer RNAs synthesized by the S. aureus and Bacillus subtilis RNA polymerases from the pE194 and pLS1 ssoAs. The S. aureus RNA polymerase bound more efficiently to the native pE194 ssoA as compared with the pLS1 ssoA, suggesting that the strength of RNA polymerase-ssoA interaction may play a major role in the functionality of the ssoA sequences in Gram-positive bacteria.

Small cryptic plasmids of Streptococcus pneumoniae belong to the pC194/pUB110 family of rolling circle plasmids

The DNA sequences of two related plasmids pPR1 and pPR3 described previously in Streptococcus pneumoniae isolates from Germany and Spain were now determined. Both plasmids belong to a family of rolling circle (RC) plasmids found in a variety of bacteria. Their GC content with 32% is lower than that of the S. pneumoniae chromosomal DNA. The plasmid pPR3 has a molecular size of 3160 bp with four putative open reading frames, whereas pPR1 contained a deletion of 313 bp that included the 5'-part of ORF2 and upstream regions and differed by three bp from pPR3. The predicted protein of ORF1 showed high similarity to replication proteins of RC plasmids with 74% identical amino acids to RepA of Streptococcus thermophilus plasmids. Sequences similar to the plus origin of replication of ssDNA plasmids were present in both plasmids. They also contained a 152-bp region with over 83% identity to the minus origin of replication of the Streptococcus agalacticae plasmid pMV158.

Replication and control of circular bacterial plasmids

An essential feature of bacterial plasmids is their ability to replicate as autonomous genetic elements in a controlled way within the host. Therefore, they can be used to explore the mechanisms involved in DNA replication and to analyze the different strategies that couple DNA replication to other critical events in the cell cycle. In this review, we focus on replication and its control in circular plasmids. Plasmid replication can be conveniently divided into three stages: initiation, elongation, and termination. The inability of DNA polymerases to initiate de novo replication makes necessary the independent generation of a primer. This is solved, in circular plasmids, by two main strategies: (i) opening of the strands followed by RNA priming (theta and strand displacement replication) or (ii) cleavage of one of the DNA strands to generate a 3'-OH end (rolling-circle replication). Initiation is catalyzed most frequently by one or a few plasmid-encoded initiation proteins that recognize plasmid-specific DNA sequences and determine the point from which replication starts (the origin of replication). In some cases, these proteins also participate directly in the generation of the primer. These initiators can also play the role of pilot proteins that guide the assembly of the host replisome at the plasmid origin. Elongation of plasmid replication is carried out basically by DNA polymerase III holoenzyme (and, in some cases, by DNA polymerase I at an early stage), with the participation of other host proteins that form the replisome. Termination of replication has specific requirements and implications for reinitiation, studies of which have started. The initiation stage plays an additional role: it is the stage at which mechanisms controlling replication operate. The objective of this control is to maintain a fixed concentration of plasmid molecules in a growing bacterial population (duplication of the plasmid pool paced with duplication of the bacterial population). The molecules involved directly in this control can be (i) RNA (antisense RNA), (ii) DNA sequences (iterons), or (iii) antisense RNA and proteins acting in concert. The control elements maintain an average frequency of one plasmid replication per plasmid copy per cell cycle and can "sense" and correct deviations from this average. Most of the current knowledge on plasmid replication and its control is based on the results of analyses performed with pure cultures under steady-state growth conditions. This knowledge sets important parameters needed to understand the maintenance of these genetic elements in mixed populations and under environmental conditions.