The structure of the casein micelle of milk and its changes during processing

The effect of β-casein addition on properties and rennet behavior of reassembled casein micelles

Bovine milk contains four types of caseins with β-casein being one of the most abundant. Previous studies on cow milk have reported seemingly contradictory effects of β-casein on milk renneting behavior. The aim of this study was to gain a better understanding of how β-casein affects the properties and renneting behavior of casein micelles by using a model system of reassembled casein micelles (RCMs). We increased the β-casein ratio of RCMs to 60 % by adjusting the β-casein ratio during or after the reassembly process. We found that reducing the calcium phosphate content to 85 % was necessary for forming stable β-casein enriched RCMs. It was also found that adding β-casein during reassembly resulted in firmer rennet coagulates compared to adding it afterwards. To conclude, the order of adding β-casein significantly affected the structure formation and, consequently, the properties of RCMs.

Incorporation of β-carotene O/W emulsions into dairy foods: Impact of the colloidal stability during in vitro digestion on the lipolysis and bioaccessibility

O/W emulsions have been proposed as delivery systems of lipophilic bioactive compounds into water-based foods. This work aimed to study the impact of the food matrix on the colloidal stability of β-carotene-loaded O/W emulsion incorporated into dairy products (milk and yogurt) before and during in vitro gastrointestinal (GI) digestion. The relationship between colloidal stability, lipolysis and β-carotene bioaccessibility was also evaluated. The colloidal stability of the O/W emulsion was maintained once it was incorporated into dairy products and during GI conditions, without a significant impact of the food matrix. However, lipolysis, as FFA release, was faster and higher once the O/W emulsion (64.58 ± 2.76 %) was co-digested with dairy products (>81 %). Nevertheless, they presented non-significant differences in β-carotene bioaccessibility (38-44 %), thus dairy matrices would limit mixed micelles formation or β-carotene micellarization. This work provides valuable insight for designing dairy products fortified with bioactive compounds by using emulsions as delivery systems.

Dairy Foods: A Matrix for Human Health and Precision Nutrition-The impact of the dairy food matrix on digestion and absorption

The nutritional value of any food product has historically been measured by the calorific value of individual components, harking back to the days of the development of the bomb calorimeter. A fuller understanding of nutrition later took into account the need for specific components, such as proteins, carbohydrates, vitamins and minerals, that are known to be required for good human health and growth. In milk and milk products, these include casein and whey proteins, lactose, milk fat triacylglycerides, minor lipid components (both charged and neutral), calcium, and micronutrients. Whey proteins are known to be richer in EAA, compared with casein, and also to contain branched chain amino acids for muscle growth. Calcium is found in the form of the calcium phosphate mineral and is dispersed, but largely insoluble, in milk. All of this information does not take into account interactions between milk components, and therefore can be considered as a reductionist nutritional approach. This review takes a structural and physical chemical approach to understand how digestibility and nutritional delivery is affected by microstructures and nutrient component interactions, with a focus on mechanistic explanations.

Modeling the relationships among technological properties of sheep individual animal factors, milk composition, and minerals using generalized additive mixed models

The dairy sheep industry faces ongoing challenges in optimizing cheese production and enhancing efficiency across different breeds. This study provides crucial insights into how breed-specific factors, lactation stages, parity, and milk composition, including mineral concentrations, affect cheese yield and nutrient recovery in the curd. The aims of this study were to characterize individual sheep milk samples for cheesemaking efficiency by measuring 3 cheese yield traits (%CY; fresh curd, TS, and water retained) and 5 nutrient recovery traits (%REC; fat, protein, lactose, TS, and energy) and to examine how these traits change throughout the lactation, considering different sheep breeds, parities, and variations in milk composition and mineral concentrations. A total of 760 ewes from Massese and Comisana breeds were sampled during the morning milking at the National Association of Sheep Breeders nucleus farm (Tuscany, Italy). The application of generalized additive mixed models (GAMM) was a key element of this study, enabling a more nuanced analysis of complex relationships and nonlinear trends. The GAMM accounted for variations in breed and parity, which were included as parametric terms, as well as milk minerals, rennet coagulation time (RCT), sampling day, and interactions between DIM and milk yield (MY), fat and casein, and Ca and P, which were treated as smooth terms. This approach provided insights that would have been difficult to capture with traditional linear models. Results evidenced breed and parity-specific variations. Indeed, the Massese had overall lower cheesemaking efficiency compared with the Comisana ewes, and primiparous ewes had higher percentages of both %CY and %REC traits. The interaction between DIM × MY was less significant in the Comisana breed compared with the Massese, with notable effects only on protein and lactose recovery in the Comisana. The interaction between fat × casein was also breed specific and affected with different extent and patterns the cheesemaking traits between the 2 breeds. Longer RCT increased the water retained in the curd and reduced the recovery of TS and the individual recovery rates of the main milk components in both breeds. The effect of Ca × P was not always linear on the cheesemaking traits and between breeds. Overall, an increase of both Ca and P was associated with higher %CY and %REC, except for the recovery of fat and energy. High Na and Cl were detrimental for the cheesemaking process in both breeds, whereas the destabilizing effect of K was particularly notable on the fresh curd, curd TS and the recovery of protein from the Massese milk. These findings highlight that sheep breed and parity, alongside specific milk components and mineral concentrations, significantly affect cheesemaking efficiency, with important differences between the Massese and Comisana breeds. Efficient cheesemaking requires careful consideration of mineral concentrations, especially in terms of Ca, P, Na, Cl, and K, to optimize yields and nutrient recovery in the curd.

Casein Functionalization Using High-Pressure Homogenization and Emulsifying Salts

In milk, casein proteins orientate themselves into spherical micellar structures with hydrophobic casein subtypes concentrated in the core, while hydrophilic casein subtypes populate the exterior. Previous research demonstrated that milk with the addition of emulsifying salts coupled with high-pressure homogenization induced an unprecedented amount of casein micelle dissociation. This research aims to quantify the extent of casein micelle dissociation in diluted skim milk and evaluate the functionality of these proteins following emulsifying salt treatment coupled with high-pressure homogenization. To evaluate the extent of micellar dissociation, dilute skim milk solutions (20% v/v) were prepared with a varying amount of treatment: no processing (control), just emulsifying salts (Treatment E, 100 mM sodium hexametaphosphate), just high-pressure homogenization (Treatment H, at 300 MPa), and EH (a combination of E and H treatments). Samples were then put through varying filter sizes (0.22 µm, 0.05 µm), and the permeates were analyzed using sodium dodecyl sulfate-polyacrylamide gel electrophoresis. In the control group (20% skim milk), 9.35% ± 2.53% casein protein permeated through a 0.05 µm filter. Alternatively, 93.2% ± 7.71% casein protein was present in EH samples post-filtration through a 0.05 µm filter, demonstrating a significant processing-induced dissociation of casein micelles. A potential benefit to this casein micelle size reduction is the exposure of highly functional hydrophobic subunits from the core of the micelle. In agreement, compared to the control samples, the EH samples had higher foam expansion index values (138.3% ± 12.58% vs. 33.33% ± 14.43% at 0 h), foam stability (113.3% ± 5.774% vs. 21.67% ± 2.887% after 8 h), emulsifying activity (ca. two-fold higher), and interaction with caffeine. These data demonstrate that E, coupled with H, enhances skim milk system functionality, and these changes are likely due to micellar dissociation and protein conformational changes. This work has direct applications in dairy systems (e.g., dairy foams, dairy ingredients) as well as implications for potential processing strategies for other protein-rich systems.

Goat's Skim Milk Enriched with Agrocybe aegerita (V. Brig.) Vizzini Mushroom Extract: Optimization, Physico-Chemical Characterization, and Evaluation of Techno-Functional, Biological and Antimicrobial Properties

The aim of this study was to develop a novel functional ingredient-goat's skim milk enriched with Agrocybe aegerita (V. Brig.) Vizzini mushroom extract (ME/M)-using Central Composite Design (CCD). The optimized ME/M ingredient was evaluated for its physico-chemical, techno-functional, biological, and antimicrobial properties. Physico-chemical properties were analyzed using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy, Scanning Electron Microscopy (SEM), and Dynamic Light Scattering (DLS). The ingredient exhibited a polymodal particle size distribution and contained glucans, along with a newly formed polypeptide resulting from the selective cleavage of goat milk proteins. A 0.1% ME/M solution demonstrated good emulsifying and foaming properties. Additionally, ME/M showed strong antiproliferative effects on human cancer cell lines, particularly Caco-2 (colorectal) and MCF7 (breast) cancer cells. The ingredient also promoted HaCaT cell growth without cytotoxic effects, suggesting its safety and potential wound-healing properties. Furthermore, the addition of ME/M to HaCaT cells inoculated with Staphylococcus aureus resulted in reduced IL-6 levels compared to the control (without ME/M), indicating a dose-dependent anti-inflammatory effect. The optimized ME/M ingredient also exhibited antibacterial, antifungal, anticandidal, and antibiofilm activity in one-fourth of MIC. These findings suggest that the formulated ME/M ingredient has strong potential for use in the development of functional foods offering both desirable techno-functional properties and bioactive benefits.

Insight into the interaction of serum albumin with antihypertensive peptide Val-Ala-Pro from bovine casein hydrolysate based on the biolayer interferometry, multi-spectroscopic analysis and computational evaluation

Food-derived angiotensin-converting enzyme inhibitory peptide (ACEIP) has an effect in supportive therapeutic on hypertension. Bovine serum albumin (BSA) as a model transporter protein to explore the interaction mechanisms with casein-hydrolyzed ACEIP Val-Ala-Pro (VAP) by multi-spectroscopic, biolayer interferometry (BLI), isothermal titration calorimetry (ITC), molecular docking, and molecular dynamics simulations. Multi-spectroscopic analysis showed that the non-covalent complexes formed by VAP and BSA resulted in decreased hydrophobicity and α-helix contents on BSA, revealing the unfolding of the BSA structure. BLI revealed the reversible binding process of BSA to VAP. ITC confirmed that the combination of VAP to BSA was a spontaneous process mainly driven by entropy. Molecular docking and molecular dynamic simulations showed that VAP was primarily bound in site II of BSA by hydrogen bonding, hydrophobic interactions, van der Waals force, and electrostatic force. This study provides a systematic method to reveal the structure-activity relationship of ACEIPs.

Digestion of food proteins: the role of pepsin

The nutritive value of a protein is determined not only by its amino acid composition, but also by its digestibility in the gastrointestinal tract. The interaction between proteins and pepsin in the gastric stage is the first step and plays an important role in protein hydrolysis. Moreover, it affects the amino acid release rates and the allergenicity of the proteins. The interaction between pepsin and proteins from different food sources is highly dependent on the protein species, composition, processing treatment, and the presence of other food components. Coagulation of milk proteins under gastric conditions to form a coagulum is a unique behavior that affects gastric emptying and further hydrolysis of proteins. The processing treatment of proteins, either from milk or other sources, may change their structure, interactions with pepsin, and allergenicity. For example, the heat treatment of milk proteins results in the formation of a looser curd in the gastric phase and facilitates protein digestion by pepsin. Heated meat proteins undergo denaturation and conformational changes that enhance the rate of pepsin digestion. This review provides new ideas for the design of food products containing high protein concentrations that optimize nutrition while facilitating low allergenicity for consumers.

Blending pectin and κ-carrageenan converted the liquid yogurt induced by pectin into the solid yogurt

Effects of 0.11 %-0.17 % pectin and the mixture of 0.03 % κ-carrageenan and 0.11 %-0.17 % pectin on texture and microstructure of yogurt were investigated in this work. Rheology analysis demonstrated that adding 0.11 %-0.17 % pectin before fermentation inhibited gelation of yogurt and liquid yogurt was formed. However, when the above κ-carrageenan/pectin mixture was added, yogurt was gelled and solid-like. It was demonstrated by CLSM that milk protein aggregated into separated particles in the liquid yogurt induced by pectin, while milk protein aggregated into a continuous network in the solid yogurt induced by the mixture. Adding 0.11 %-0.17 % pectin into the casein micelle suspension induced aggregation of casein micelles into separated particles, which was the same in the corresponding liquid yogurt samples. Moreover, casein micelles precipitated in the pectin/casein micelle mixtures after storage for 3 h. However, when the above mixture was added into the casein micelle suspension, tightly-connected casein micelle aggregates appeared and the resultant κ-carrageenan/pectin/casein micelle mixtures were stable after storage for 3 h. These results indicated that the pectin-casein micelle interaction played an essential role in formation of the liquid yogurt and κ-carrageenan altered this interaction. Thus, blending κ-carrageenan and pectin converted the liquid yogurt induced by pectin into the solid yogurt.

Cellular milk production: Proteins and minerals in secretomes from cultivated bovine milk-derived mammary cells

This study explores the feasibility of utilizing in vitro cultivated milk-derived bovine mammary epithelial cells (bMECs) for the production of milk constituents. BMECs were isolated from milk and treated with various lactogenic agents in 3D transwell systems. By proteomics, >900 proteins were identified and quantified in the secretomes, including >100 milk-related proteins such as caseins and enzymes. Despite limited secretion of total proteins and major milk proteins, 110 proteins were found phosphorylated, including 27 involved in metal- or calcium-binding. Mineral analysis confirmed that 6-9 % of minerals in secretomes were associated with proteins. Notably, six proteins, including prolactin, were secreted into the basolateral side of bMECs without lactogenic treatment, suggesting their local de novo synthesis. This research advances our understanding of bMECs biology, as well as the compositional and functional features of their secretomes, highlighting their potential for sustainable production of functional milk proteins, meanwhile emphasizing the need for further optimization.

Low Demineralized Caseins to Replace Sodium Caseinate for Application in Whipped Creams

Caseinate is commonly used in the dairy industry for its stabilizing properties. Its functionalities are largely due to its manufacturing process involving a high level of demineralization that induces casein precipitation. To address this, the researchers are looking for alternatives to respond to consumer demands for high-quality ingredients and increase efficiency. In the present study, we explored low demineralization (0-43%) that preserves the casein integrity to produce caseins that can substitute caseinate in whipping creams (WC). The physicochemical, structural, and functional properties of these caseins were evaluated to assess their viability as surface-active agents in blend-fat whipping cream. The results showed that a demineralization level over 43% significantly impacts the size, secondary structures (β-sheets, β-turns, and α-helices particularly), and surface hydrophobicity that favorably impact the emulsifying properties but diminish the foam stability. WC made with caseins demineralized at 0 and 13% provided stable foam, with the lowest emulsion stability at 0% of demineralization. Using demineralized caseins at 13% offers a sustainable alternative to caseinate in food products requiring stable foams as WCs without significantly altering other desired functionalities such as overrun and emulsion stability. Further research studies into optimizing the demineralization process and exploring applications in other food matrices are suggested.

Changes in ficin specificity by different substrate proteins promoted by enzyme immobilization

Ficin extract has been immobilized using different supports: glyoxyl and Aspartic/1,6 hexamethylenediamine (Asp/HA) agarose beads. The latter was later submitted to glutaraldehyde modification to get covalent immobilization. The activities of these 3 kinds of biocatalysts were compared utilizing 4 different substrates, casein, hemoglobin and bovine serum albumin and benzoyl-arginine-p-nitroanilide at pH 7 and 5. Using glyoxyl-agarose, the effect of enzyme-support reaction time on the activity versus the four substrates at both pH values was studied. Reaction time has been shown to distort the enzyme due to an increase in the number of covalent support-enzyme bonds. Surprisingly, for all the substrates and conditions the prolongation of the enzyme-support reaction did not imply a decrease in enzyme activity. Using the Asp/HA supports (with different amount of HA) differences in the effect on enzyme activity versus the different substrates are much more significant, while with some substrates the immobilization produced a decrease in enzyme activity, with in other cases the activity increased. These different effects are even increased after glutaraldehyde treatment. That way, the conformational changes induced by the biocatalyst immobilization or the chemical modification fully altered the enzyme protein specificity. This may also have some implications when following enzyme inactivation.

Law and Order of Colloidal Tectonics: From Molecules to Self-Assembled Colloids

Since biochemists and biologists have progressed in understanding the mechanisms involved in living organisms, biological systems have become a source of inspiration for chemists. In this context, the concept of colloidal tectonics, describing the spontaneous formation of colloidal particles or supracolloidal structures in which the building blocks are called "tectons", has emerged. Therefore, a bottom-up edification of tectons towards (supra) colloidal structures is allowed. Each (supra) colloidal system has at least one of the following properties: amphiphilicity, predictability, versatility, commutability, and reversibility. However, for these systems to perform even more interesting functions, it is necessary for tectons to have very precise chemical and physical properties so that new properties emerge in (supra) colloidal systems. In this way, colloidal tectonics enables engineering at the nano- and micrometric level and contributes to the development of smart bioinspired systems with applications in catalysis, drug delivery, etc. In this review, an overview of the concept of colloidal tectonics is illustrated by some biotic systems. The design of abiotic (supra) colloidal systems and their applications in various fields are also addressed (notably Pickering emulsions for catalysis or drug delivery). Finally, theoretical directions for the design of novel self-assembled (supra) colloidal systems are discussed.

Designing tailor-made steric matters to improve the immobilized ficin specificity for small versus large proteins

The development of strategies that can permit to adjust the size specificity of immobilized proteases by the generation of steric hindrances may enlarge its applicability. Using as a model ficin immobilized on glyoxyl agarose, two strategies were assayed to generate tailor made steric hindrances. First, ficin has been coimmobilized on supports coated with large proteins (hemoglobin or bovine serum albumin (BSA)). While coimmobilization of ficin with BSA presented no effect on the activity versus any of the assayed substrates, coimmobilization with hemoglobin permitted to improve the immobilized ficin specificity for casein versus hemoglobin, but still significant activity versus hemoglobin remained. Second, aldehyde-dextran has been employed to modify the immobilized ficin, trying to generate steric hindrances to avoid the entry of large proteins (hemoglobin) while enabling the entry of small ones (casein). This also increased the size specificity of ficin, but still did not suppress the activity versus hemoglobin. The combination of both strategies and the use of 37ºC during the proteolysis enabled to almost fully nullify the hydrolytic activity versus hemoglobin while preserving a high percentage of the activity versus casein. The modifications improved enzyme stability and the biocatalyst could be reused for 5 cycles without alteration of its properties.

Dynamic in vitro gastric digestion of skimmed milk using the NERDT, an advanced human biomimetic digestion system

The main objective of this study was to assess the ability of the NEar Real Digestive Tract (NERDT), a computer-controlled biomimetic in vitro digestion system that considers the biomechanics of the stomach, to reproduce physiologically relevant features of skimmed milk gastric digestion. A second objective was to evaluate the influence of pepsin on the gastric coagulation and emptying of milk proteins from experiments performed with and without pepsin. A mass balance model over the stomach, assuming a perfectly stirred reactor behaviour, has been developed. The results show that the NERDT can adequately reproduce the targeted kinetics of gastric acidification and emptying, with a sieving effect that naturally leads to a delayed emptying of caseins. Milk coagulated earlier and more chyme was emptied towards the end of the experiments in the presence of pepsin than without, hence illustrating the key influence of pepsin on the gastric coagulation of caseins and subsequent hydrolysis and emptying of dairy particles. Overall, this study shows that the NERDT can be adequately controlled to achieve desired gastric digestion conditions, and appears to be a very useful tool to further improve the knowledge of the gastric digestion behaviour of complex foods such as milk.

Detailed mineral profile of milk, whey, and cheese from cows, buffaloes, goats, ewes, and dromedary camels, and efficiency of recovery of minerals in their cheese

Milk and dairy products are important in the human diet not only for the macronutrients, such as proteins and fats, that they provide, but also for the supply of essential micronutrients, such as minerals. Minerals are present in milk in soluble form in the aqueous phase and in colloidal form associated with the macronutrients of the milk. These 2 forms affect the nutritional functions of the minerals and their contribution to the technological properties of milk during cheese making. The aim of the present work was to study and compare the detailed mineral profiles of dairy foods (milk, whey, and cheese) obtained from cows, buffaloes, goats, ewes and dromedary camels, and to analyze the recovery in the curd of the individual minerals according to a model cheese-making procedure applied to the milk of these 5 dairy species. The detailed mineral profile of the milk samples was obtained by inductively coupled plasma-optical emission spectroscopy. We divided the 21 minerals identified in the 3 different matrices into essential macro- and microminerals, and environmental microminerals, and calculated the recovery of the individual minerals in the cheeses. The complete mineral profiles and the recoveries in the cheeses were then analyzed using a linear mixed model with Species, Food, and their interaction included as fixed effects, and Sample within Species as a random effect. The mineral profiles of each food matrix were then analyzed separately with a general linear model in which only the fixed effect of Species was included. The results showed that the species could be divided into 2 groups: those producing a more diluted milk characterized by a higher content of soluble minerals (in particular, K), and those with a more concentrated milk with a higher colloidal mineral content in the skim of the milk (such as Ca and P). The recoveries of the minerals in the curd were in line with the initial content in the milk, and also highlighted the fact that the influence of the brine was not limited to the Na content but to its whole mineral makeup. These results provide valuable information for the evaluation of the nutritional and technological properties of milk, and for the uses made of the byproducts of cheese making from the milk of different species.

The bubbly life and death of animal and plant milk foams

Milk foams are fragile objects, readily prepared for frothy cappuccinos and lattes using bovine milk. However, evolving consumer preferences driven by health, climate change, veganism, and sustainability have created a substantial demand for creating frothy beverages using plant-based milk alternatives or plant milks. In this contribution, we characterize maximum foam volume and half-lifetime as metrics for foamability and foam stability and drainage kinetics of two animal milks (cow and goat) and compared them to those of the six most popular, commercially available plant milks: almond, oat, soy, pea, coconut, and rice. We used three set-ups: an electric frother with cold (10 °C) and hot (65 °C) settings to emulate the real-life application of creating foam for cappuccinos, a commercial device called a dynamic foam analyzer or DFA and fizzics-scope, a bespoke device we built. Fizzics-scope visualizes foam creation, evolution, and destruction using an extended prism-based imaging system facilitating the capture of spatiotemporal variation in foam microstructure over a broader range of heights and liquid fractions. Among the chosen eight milks, oat produces the longest-lasting foams, and rice has the lowest amount and stability of foam. Using the hot settings, animal milks produce more foam volume using an electric frother than the top three plant milks in terms of foamability (oat, pea, and soy). Using the cold settings, oat, soy, and almond outperform cow milk in terms of foam volume and lifetime for foams made with the frother and sparging. Most plant milks have higher viscosity due to added polysaccharide thickeners, and in some, lecithin and saponin can supplement globular proteins as emulsifiers. Our studies combining foam creation by frothing or sparging with imaging protocols to track global foam volume and local bubble size changes present opportunities for contrasting the physicochemical properties and functional attributes of animal and plant-based milk and ingredients for engineering better alternatives.

Composite hydrogels assembled from food-grade biopolymers: Fabrication, properties, and applications

Biopolymer hydrogels have a broad range of applications as soft materials in a variety of commercial products, including foods, cosmetics, agrochemicals, personal care products, pharmaceuticals, and biomedical products. They consist of a network of entangled or crosslinked biopolymer molecules that traps relatively large quantities of water and provides semi-solid properties, like viscoelasticity or plasticity. Composite biopolymer hydrogels contain inclusions (fillers) to enhance their functional properties, including solid particles, liquid droplets, gas bubbles, nanofibers, or biological cells. These fillers vary in their composition, size, shape, rheology, and surface properties, which influences their impact on the rheological properties of the biopolymer hydrogels. In this article, the various types of biopolymers used to fabricate composite hydrogels are reviewed, with an emphasis on edible proteins and polysaccharides from sustainable sources, such as plants, algae, or microbial fermentation. The different kinds of gelling mechanism exhibited by these biopolymers are then discussed, including heat-, cold-, ion-, pH-, enzyme-, and pressure-set mechanisms. The different ways that biopolymer molecules can organize themselves in single and mixed biopolymer hydrogels are then highlighted, including polymeric, particulate, interpenetrating, phase-separated, and co-gelling systems. The impacts of incorporating fillers on the rheological properties of composite biopolymer hydrogels are then discussed, including mathematical models that have been developed to describe these effects. Finally, potential applications of composite biopolymer hydrogels are presented, including as delivery systems, packaging materials, artificial tissues, wound healing materials, meat analogs, filters, and adsorbents. The information provided in this article is intended to stimulate further research into the development and application of composite biopolymer hydrogels.

Natural compounds-based nanomedicines for cancer treatment: Future directions and challenges

Several efforts have been extensively accomplished for the amelioration of the cancer treatments using different types of new drugs and less invasives therapies in comparison with the traditional therapeutic modalities, which are widely associated with numerous drawbacks, such as drug resistance, non-selectivity and high costs, restraining their clinical response. The application of natural compounds for the prevention and treatment of different cancer cells has attracted significant attention from the pharmaceuticals and scientific communities over the past decades. Although the use of nanotechnology in cancer therapy is still in the preliminary stages, the application of nanotherapeutics has demonstrated to decrease the various limitations related to the use of natural compounds, such as physical/chemical instability, poor aqueous solubility, and low bioavailability. Despite the nanotechnology has emerged as a promise to improve the bioavailability of the natural compounds, there are still limited clinical trials performed for their application with various challenges required for the pre-clinical and clinical trials, such as production at an industrial level, assurance of nanotherapeutics long-term stability, physiological barriers and safety and regulatory issues. This review highlights the most recent advances in the nanocarriers for natural compounds secreted from plants, bacteria, fungi, and marine organisms, as well as their role on cell signaling pathways for anticancer treatments. Additionally, the clinical status and the main challenges regarding the natural compounds loaded in nanocarriers for clinical applications were also discussed.

Preparation of liquid yogurt in the presence of pectin and its formation mechanism

We had previously observed that adding pectin into milk before fermentation inhibited gelation of yogurt but did not affect the pH. Thus, this work aimed to prepare such liquid yogurt and clarify its formation mechanism. It was found that liquid yogurt was obtained in the presence of 0.10%-0.20% pectin. However, at lower or higher pectin concentrations, yogurt was gelled. Confocal laser scanning microscopy analysis demonstrated that 0.10%-0.20% pectin induced milk protein aggregating into separated particles rather than a continuous network, which explained why liquid yogurt was formed. Moreover, adding 0.10%-0.20% pectin into the casein micelle suspension induced aggregation of casein micelles at pH 6.8. After pH decreased to 4.3, casein micelles showed more aggregation but they were still separated particles, which was the same in the corresponding yogurt samples. These results suggested that pectin changed the aggregation mode of casein micelles and induced formation of liquid yogurt.

The contrasting roles of co-solvents in protein formulations and food products

Protein aggregation is a major hurdle in developing biopharmaceuticals, in particular protein formulation area, but plays a pivotal role in food products. Co-solvents are used to suppress protein aggregation in pharmaceutical proteins. On the contrary, aggregation is encouraged in the process of food product making. Thus, it is expected that co-solvents play a contrasting role in biopharmaceutical formulation and food products. Here, we show several examples that utilize co-solvents, e.g., salting-out salts, sugars, polyols and divalent cations in promoting protein-protein interactions. The mechanisms of co-solvent effects on protein aggregation and solubility have been studied on aqueous protein solution and applied to develop pharmaceutical formulation based on the acquired scientific knowledge. On the contrary, co-solvents have been used in food industries based on empirical basis. Here, we will review the mechanisms of co-solvent effects on protein-protein interactions that can be applied to both pharmaceutical and food industries and hope to convey knowledge acquired through research on co-solvent interactions in aqueous protein solution and formulation to those involved in food science and provide those involved in protein solution research with the observations on aggregation behavior of food proteins.

The Impact of Thermal Treatment Intensity on Proteins, Fatty Acids, Macro/Micro-Nutrients, Flavor, and Heating Markers of Milk-A Comprehensive Review

Milk thermal treatment, such as pasteurization, high-temperature short-time processing, and the emerging ultra-short-time processing (<0.5 s), are crucial for ensuring milk safety and extending its shelf life. Milk is a nutritive food matrix with various macro/micro-nutrients and other constituents that are possibly affected by thermal treatment for reasons associated with processing strength. Therefore, understanding the relationship between heating strength and milk quality is vital for the dairy industry. This review summarizes the impact of thermal treatment strength on milk's nutritional and sensory properties, the synthesizing of the structural integrity and bioavailability of milk proteins, the profile and stability of fatty acids, the retention of macro/micro-nutrients, as well as the overall flavor profile. Additionally, it examines the formation of heat-induced markers, such as Maillard reaction products, lactulose, furosine, and alkaline phosphatase activity, which serve as indicators of heating intensity. Flavor and heating markers are commonly used to assess the quality of pasteurized milk. By examining former studies, we conclude that ultra-short-time-processing-treated milk is comparable to pasteurized milk in terms of specific parameters (such as whey protein behavior, furosine, and ALP contents). This review aims to better summarize how thermal treatments influence the milk matrix, guiding the dairy industry's development and balancing milk products' safety and nutritional value.

Impact of Diafiltration Media and Filtration Modes on Fouling and Performance in Skim Milk Microfiltration: A Comparative Study

This research utilized a customized laboratory setup to compare the filtration performance and fouling buildup during microfiltration with polymeric membranes of skim milk using 2 diafiltration media: ultrafiltration permeate and ultrapure water. Two filtration modes were evaluated: in stage 1, the diafiltration media was added in a 1:1 ratio, with the collection of permeate continuing until the initial protein concentration was restored. In stage 2, retentates and permeates were recycled to simulate fouling accumulation in a steady-state without altering the retentate composition. Utilizing water as the diafiltration medium resulted in higher flux and lower resistance values compared with using ultrafiltration permeate, irrespective of the filtration mode. The concentration had a significant impact on membrane resistance, with no noticeable time-dependent effect on fouling layer development after 60 min of filtration when the retentate composition remained constant. The protein composition of the permeate and extracted foulants were comparable between the 2 media, with caseins predominating in the fouling layer.

Recent advances in the bovine β-casein gene mutants on functional characteristics and nutritional health of dairy products: Status, challenges, and prospects

β-casein is the second most abundant form of casein in milk. Changes in amino acid sequence at specific positions in the primary structure of β-casein in milk will produce gene mutations that affect the physicochemical properties of dairy products and the hydrolysis site of digestive enzymes. The screening method of β-casein allele frequency detection in dairy products also has attracted the extensive attention of scientists and farmers. The A1 and A2 β-casein is the two usual mutation types, distinguished by histidine and proline at position 67 in the peptide chain. This paper summarizes the effects of A1 and A2 β-casein on the physicochemical properties of dairy products and evaluates the effects on human health, and the genotyping methods were also concluded. Impressively, this review presents possible future opportunities and challenges for the promising field of A2 β-casein, providing a valuable reference for the development of the functional dairy market.

A SAXS and USAXS study of the influence of pH on the casein micelle structure

Changes in milk pH significantly influence the behavior and physical properties of casein micelles; however, the effects of these changes on casein micelle structures are still unclear. The aim of this study was to elucidate the effect of changes in pH range from 5.9 to 7.1 on the structure of casein micelles in milk using small-angle X-ray scattering (SAXS) and ultra small-angle X-ray scattering (USAXS). The casein micelles formed one-dimensional aggregates. The micelle radius decreased with decreasing pH, whereas the size of the water domain increased. The distance between colloidal calcium phosphates (CCP) remained unchanged, whereas the CCP radius decreased with decreasing pH. Voluminosity, which was calculated from scattering intensities, increased at increased pH. In conclusion, the micelle structure changed significantly in response to changes in pH. Our findings help to understand the changes in the physical properties of milk at various pH levels in terms of the microscopic structure.

Gastric coagulation and postprandial amino acid absorption of milk is affected by mineral composition: a randomized crossover trial

Background: In vitro studies suggest that casein coagulation of milk is influenced by its mineral composition, and may therefore affect the dynamics of protein digestion, gastric emptying and appearance of amino acids (AA) in the blood, but this remains to be confirmed in vivo. Objective: This study aimed to compare gastrointestinal digestion between two milks with the same total calcium content but different casein mineralization (CM). Design: Fifteen males (age 30.9 ± 13.8 years, BMI 22.5 ± 2.2 kg m-2) participated in this randomized cross-over study with two treatments. Participants underwent gastric magnetic resonance imaging (MRI) scans at the baseline and every 10 min up to 90 min after consumption of 600 ml milk with low or high CM. Blood samples were taken at the baseline and up to 5 hours postprandially. Primary outcomes were postprandial plasma AA concentrations and gastric emptying rate. Secondary outcomes were postprandial glucose and insulin levels, gastric coagulation as estimated by image texture metrics, and appetite ratings. Results: Gastric content volume over time was similar for both treatments. However, gastric content image analysis suggested that the liquid fraction emptied quicker in the high CM milk, while the coagulum emptied slower. Relative to high CM, low CM showed earlier appearance of AAs that are more dominant in casein, such as proline (MD 4.18 μmol L-1, 95% CI [2.38-5.98], p < 0.001), while there was no difference in appearance of AAs that are more dominant in whey protein, such as leucine. The image texture metrics homogeneity and busyness differed significantly between treatments (MD 0.007, 95% CI [0.001, 0.012], p = 0.022; MD 0.005, 95% CI [0.001, 0.010], p = 0.012) likely because of a reduced coagulation in the low CM milk. Conclusions: Mineral composition of milk can influence postprandial serum AA kinetics, likely due to differences in coagulation dynamics. The clinical trial registry number is NL8959 (https://clinicaltrials.gov).

Influence of calcium concentration on the re-assembly of sodium caseinate into casein micelles and on their renneting behavior

Inducing the spontaneous aggregation from casein molecules (i.e. αs1, αs2, β, and κ-casein) into re-assembled casein micelles (RCMs) through the addition of salts as an alternative to native casein micelles, has garnered increasing attention in recent years. In this investigation, re-assembled casein micelles were generated by adding varying amounts of calcium, phosphate, and citrate ions to a sodium caseinate dispersion. The formed micelles were further characterized in terms of particle size, optical density, and partitioning of calcium ions and caseins. Besides, their small-angle X-ray scattering (SAXS) profiles and renneting properties were evaluated. The observations revealed that the particle size and optical density of RCMs increased with the continuous addition of salts, while the micellar yield improved and could exceed 85 %. Moreover, the quantity of individual casein molecules that contributed to the creation of micelles was in concordance with their level of phosphorylation (i.e. αs2-casein > αs1-casein > β-casein > κ-casein). Mineral analysis results and SAXS scattering profiles confirmed that the added calcium ions acted as cross-linkers and participated in the construction of calcium phosphate nanoclusters. The renneting ability of RCMs was primarily dependent upon the colloidal calcium content per gram of micellar casein.

A2 milk consumption and its health benefits: an update

Milk is a widely consumed nutrient-rich food containing protein variants such as casein A2 and A1. A1 differs from A2 in an amino acid at position 67 (Pro67 to His67). The breakdown of β-casein yields β-casomorphins (BCM), among which BCM-7 is extensively studied for its effects on the human body. Animal studies have shown that A1 β-casein milk increases digestive transit time and enhances myeloperoxidase activity. Individuals with lactose intolerance prefer A2 milk to conventional A1 milk, as BCM-7 in A1 milk can lead to inflammation and discomfort in sensitive individuals. A2 milk, which contains A2 β-casein, is believed to be more easily digestible than A1 β-casein. Its popularity has grown owing to reports linking A1 casein to diseases such as type 1 diabetes, heart disease, and autism. A2 milk has gained popularity as an alternative to A1 milk, primarily because of its potential benefits for individuals with certain diseases. This review aims to provide an updated understanding of A2 milk consumption and its health benefits. This review aims to provide an updated understanding of A2 milk consumption and its health benefits.

Effect of dipotassium phosphate addition and heat on proteins and minerals in milk protein beverages

Our objective was to determine the effects of dipotassium phosphate (DKP) addition, heat treatments (no heat, high temperature, short time [HTST]: 72°C for 15 s, and direct steam injection UHT: 142°C for 2.3 s), and storage time on the soluble protein composition and mineral (P, Ca, K) concentration of the aqueous phase around casein micelles in 7.5% milk protein-based beverages made with liquid skim milk protein concentrate (MPC) and micellar casein concentrate (MCC). Milk protein concentrate was produced using a spiral wound polymeric membrane, and MCC was produced using a 0.1-µm ceramic membrane by filtration at 50°C. Two DKP concentrations were used (0% and 0.15% wt/wt) within each of the 3 heat treatments. All beverages had no other additives and ran through heat treatment without coagulation. Ultracentrifugation (2-h run at 4°C) supernatants of the beverages were collected at 1, 5, 8, 12, and 15-d storage at 4°C. Phosphorus, Ca, and K concentrations in the beverages and supernatants were measured using inductively coupled plasma spectrometry. Protein composition of supernatants was measured using Kjeldahl and sodium dodecyl sulfate-PAGE. Micellar casein concentrate and MPC beverages with 0.15% DKP had higher concentrations of supernatant protein, Ca, and P than beverages without DKP. Protein, Ca, and P concentrations were higher in MCC supernatant than in MPC supernatant when DKP was added, and these concentrations increased over storage time, especially when lower heat treatments (HTST or no heat treatment) had been applied. Dipotassium phosphate addition caused the dissociation of αS-, β-, and κ-casein, and casein proteolysis products out of the casein micelles, and DKP addition explained over 70% of the increase in supernatant protein, P, and Ca concentrations. Dipotassium phosphate could be removed from 7.5% of protein beverages made with fresh liquid MCC and MPC (containing a residual lactose concentration of 0.6% to 0.7% and the proportional amount of soluble milk minerals), as these beverages maintain heat-processing stability without DKP addition.

Changes in Milk Protein Functionality at Low Temperatures and Rennet Concentrations

This study aimed to evaluate the influence of low-concentration rennet on the chemical, rheological characteristics, and protein fractions of skim milk (SM) at 4 ± 1 °C. Skimmed milk (SM) was divided into four lots of 500 mL, and diluted rennet (1:10,000) was added at different levels at 4 ± 1 °C. The treatments included control (no rennet), T1 (0.001 mL/rennet), T2 (0.01 mL rennet), and T3 (0.1 mL rennet) treatments, which were incubated for 24 h. The sampling was performed at 0, 1, 2, 6, 12, and 24 h, and the SM after incubation time was heated to 73 °C/16 s to denature the rennet enzyme. Skim milk samples (SMS) (control and rennet-added samples) were evaluated for proximate composition, capillary gel electrophoresis (CGE), hydrodynamic diameter, zeta potential, and rheology at 0, 1, 2, 6, 12, and 24 h. Foaming ability, foaming stability, water-holding capacity (WHC), oil emulsifying activity (OEA), and emulsion stability (ES) were performed at 0, 12, and 24 h of incubation time. There was a significant (p < 0.05) increase in non-proteins by 0.50% and in non-casein nitrogen by 0.81% as incubation progressed. The results showed that aggregation or curd was not formed during storage time. The CGE data indicated that increasing the rennet concentration had a significant (p < 0.05) effect on decreasing κ-CN, and breakdown increased at higher levels of rennet usage. There was a significant (p < 0.05) increase in the hydrodynamic diameter and a decrease in the zeta potential values in rennet-added samples at the end of the incubation time (24 h). The rheological results showed no changes in the storage modulus (G'), loss modulus (G″), or viscosity values. Increasing the rennet amount and storage time led to a significant (p < 0.05) decrease in the foaming ability and foaming stability and a significant (p < 0.05) increase in the oil emulsifying activity and emulsion stability of rennet-added SMS. This study concluded that milk protein functionality can be changed without aggregating or curd formation, and rennet milk can be processed.

Structural Properties of Casein Micelles with Adjusted Micellar Calcium Phosphate Content

Micellar calcium phosphate (MCP) content of skim milk was modified by pH adjustment followed by dialysis. Turbidity, casein micelle size and partitioning of Ca and caseins between the colloidal and soluble phases of milk were determined. Protein structure was characterised by Fourier transform infrared (FTIR) spectroscopy and proton nuclear magnetic resonance (1H NMR), whereas organic and inorganic phosphorus were studied by phosphorus-31 nuclear magnetic resonance (31P NMR). The sample with the lowest MCP content (MCP7) exhibited the smallest particle size and turbidity, measuring 83 ± 8 nm and 0.08 ± 0.01 cm-1, respectively. Concentrations of soluble caseins increased with decreasing MCP levels. At ~60% MCP removal, FTIR analysis indicated a critical stage of structural rearrangement and 31P NMR analysis showed an increase in signal intensity for Ca-free Ser-P, which further increased as MCP concentration was further reduced. In conclusion, this study highlighted the importance of MCP in maintaining micellar structure and its impact on the integrity of casein micelle.

Understanding the role of pH in cheese manufacturing: general aspects of cheese quality and safety

Cheese production has emerged as science and technology in the past few years, which was considered an artisan craft in the earlier period. However, despite intensive research work from many decades, the complex changes that occur during preparation and ripening of cheese are not apparent, affecting the quality and safety of cheese. Over time, several factors are studied and reviewed that affect cheese quality. The pH of the cheese curd matrix from manufacturing till ripening is one of the most crucial parameters that governs several aspects of cheese quality. Therefore, this paper aims to highlight the effect of pH on various processes (such as rennet coagulation, whey syneresis, salt absorption and ripening), microstructure and dynamic rheology, and microbiological changes that regulate the overall quality and safety aspects of cheeses. Understanding the role of pH on cheese quality parameters will aid to make better and more consistent cheeses that will satisfy both the consumers and cheese-makers.

Bioactive peptides in hydrolysates of bovine and camel milk proteins: A review of studies on peptides that reduce blood pressure, improve glucose homeostasis, and inhibit pathogen adhesion

The prevalence of diet-related chronic conditions including hypertension and cardiovascular disease, and diabetes mellitus has increased worldwide. Research regarding the use of food-derived bioactive peptides as an alternative strategy to mitigate chronic diseases is on the rise. Milk is recognized as one of the main dietary protein sources for health beneficial bioactive compounds. Hundreds of in vitro studies have suggested that milk-derived bioactive peptides offer multiple biological and physiological benefits, and some but not all were confirmed in vivo with animal models for hypertension, hyperglycemia, and pathogen adhesion. However, only a limited number of health benefits have been confirmed by randomized clinical trials. This review provides an overview of the current clinical studies that target hypertension, postprandial hyperglycemic, and adhesion of enteric pathogen with bioactive peptides derived from bovine and camel milk, with a focus on the factors affecting the efficacy of orally ingested products.

Effect of temperature and protein concentration on the protein types within the ultracentrifugation supernatant of liquid micellar casein concentrate

Liquid micellar casein concentrate (MCC) is an ideal milk-based protein ingredient for neutral-pH ready-to-drink beverages. The texture and mouthfeel of liquid MCC-based beverages depend on the beverage protein content, as well as the composition of soluble proteins in the aqueous phase around the casein micelle. The objective of this study was to determine the composition of soluble proteins in the aqueous phase around the casein micelles in skim milk and liquid MCC containing 7.0% and 11.6% protein content. Skim milk was pasteurized and concentrated to 7% protein content by microfiltration and then to 18% protein content by ultrafiltration. The 18% MCC was then serially diluted with distilled water to produce 11.6% and 7.0% protein MCC. Skim milk, 7.0% MCC, and 11.6% MCC representing starting materials with different protein concentrations were each ultracentrifuged at 100,605 × g for 2 h. The ultracentrifugation for each of the starting materials was performed at 3 different temperatures: 4°C, 20°C, and 37°C. The ultracentrifugation supernatants were collected to represent the aqueous phase around the casein micelle in MCC solutions. The supernatants were analyzed by Kjeldahl to determine the crude protein, casein, and casein as a percentage of crude protein content, and by sodium dodecyl sulfate PAGE to determine the composition of the individual proteins. Most of the proteins in MCC supernatant (about 45%) were casein proteolysis products. The remaining proteins in the MCC supernatant consisted of a combination of intact αS-, β-, and κ-caseins (about 40%) and serum proteins (14-18%). Concentrations of αS-casein and β-casein in the supernatant increased with decreasing temperature, especially at higher protein concentrations. Temperature and interaction between temperature and protein explained about 80% of the variation in concentration of supernatant αS- and β-caseins. Concentration of supernatant κ-casein, casein proteolysis products, and serum protein increased with increasing MCC protein concentration, and MCC protein concentration explained most of the variation in supernatant κ-casein, casein proteolysis products, and serum protein concentrations. Predicted MCC apparent viscosity was positively associated with the dissociation of αS- and β-caseins. Optimal beverage viscosity could be achieved by controlling the dissociation of these proteins in MCC.

Novel details on the dissociation of casein micelle suspensions as a function of pH and temperature

Membrane filtration is a widespread process for fractionation and recombination of milk components. Although the dissociation of micellar caseins has been studied in detail in skim milk, it is important to better understand the dissociation dynamics occurring between the colloidal and noncolloidal fractions in systems of modified composition. This research aimed at understanding the dissociation of casein proteins in micellar fractions depleted of whey proteins. Casein micelle dispersions were tested at neutral pH and pH 6 (using glucono-δ-lactone as acidulant), after incubation at 4°C or 22°C, and compared with skim milk. The ionic composition of the serum phase was measured using inductively coupled plasma-mass spectrometry, and the protein distribution analyzed using reversed phase-HPLC coupled with mass spectrometry. When incubated at 22°C, there were no differences in casein micelle dissociation between skim milk and whey protein-depleted micelles (∼2.6% dissociated casein). No additional dissociation occurred by lowering the pH from 6.8 to 6 at 22°C, albeit there were more soluble ions at low pH (71% Ca and 65% P). At 4°C, there was an increased amount of β-casein found in the serum phase (23-33% of total β-casein). In addition, there was an uneven dissociation behavior of the various genetic β-casein variants, whereof A2 was more readily released with cooling. In skim milk, approximately 22%, 18%, and 14% of κ-, αS2, and αS1-caseins, respectively, were dissociated from the micellar phase upon cooling and acidification to pH 6.0. This was in contrast to whey protein-depleted casein suspensions, in which only 6%, 5%, and 3% of κ-, αS2, and αS1-caseins, respectively, had dissociated. The results suggested that the whey proteins in the serum phase play a role in the equilibrium between colloidal and soluble caseins in milk. This is of great relevance in processes such as cold membrane fractionation, where more attention should be given to the protein composition in the serum phase, especially when concentration is combined with fractionation of the serum proteins.

Oat milk analogue versus traditional milk: Comprehensive evaluation of scientific evidence for processing techniques and health effects

Milk, enriched with high-quality protein, is a healthy and nutritious food that meets people's needs. However, consumers are turning their attention to plant-based milk due to several concerns, such as lactose intolerance, allergies and some diseases caused by milk; carbon emission from cattle farming; economical aspects; and low access to vitamins and minerals. Oat milk, which is produced from whole grain oats, is lactose free and rich in a variety of nutrients and phytochemicals. With the significant development of food processing methods and advancement in milk simulation products, the production of plant-based milk, such as cereal milk, has greatly progressed. This review described some features of oat milk analogue versus traditional milk and compared the properties, processing technologies, health effects, environmental friendliness, and consumer acceptance of these products. It is expected to provide a reference for evaluating development trends and helping consumers choose between oat milk and traditional milk.

Protein-polysaccharide-based delivery systems for enhancing the bioavailability of curcumin: A review

In recent years, a wide attention has been paid to curcumin in medicine due to its excellent physiological activities, including anti-inflammatory, antioxidant, antibacterial, and nerve damage repair. However, the low solubility, poor stability, and rapid metabolism of curcumin make its bioavailability low, which affects its development and application. As a unique biopolymer structure, protein-polysaccharide (PRO-POL)-based delivery system has the advantages of low toxicity, biocompatibility, biodegradability, and delayed release. Many scholars have investigated PRO-POL -based delivery systems to improve the bioavailability of curcumin. In this paper, we focus on the interactions between different proteins (e.g. casein, whey protein, soybean protein isolate, pea protein, zein, etc.) and polysaccharides (chitosan, sodium alginate, hyaluronic acid, pectin, etc.) and their effects on complexes diameter, surface charge, encapsulation drive, and release characteristics. The mechanism of the PRO-POL-based delivery system to enhance the bioavailability of curcumin is highlighted. In addition, the application of PRO-POL complexes loaded with curcumin is summarized, aiming to provide a reference for the construction and application of PRO-POL delivery systems.

Influence of pH on Heat-Induced Changes in Skim Milk Containing Various Levels of Micellar Calcium Phosphate

The present study investigated the effect of micellar calcium phosphate (MCP) content and pH of skim milk on heat-induced changes in skim milk. Four MCP-adjusted samples, ranging from 67 to 113% of the original MCP content, were heated (90 °C for 10 min) at different pH values (6.3, 6.6, 6.9, and 7.2), followed by determining changes in particle size, turbidity, protein distribution, and structure. The results demonstrate a strong effect of MCP level and pH on heat-induced changes in milk, with the MCP67 samples revealing the greatest thermal stability. Specifically, decreasing MCP content by 33% (MCP67) led to a smaller increase in non-sedimentable κ-casein and a lower decrease in αs2-casein concentrations after heating compared to other samples. Lower MCP content resulted in a moderate rise in the average particle size and turbidity, along with lower loading of β-turn structural component after heating at low pH (pH 6.3). Notably, MCP113 exhibited instability upon heating, with increased particle size, turbidity, and a significant decrease in non-sedimentable αs2-casein concentration, along with a slight increase in non-sedimentable κ-casein concentration. The FTIR results also revealed higher loading of intermolecular β-sheet, β-turn, and random coil structures, as well as lower loading of α-helix and β-sheet structures in MCP-enhanced skim milk samples. This suggests significant changes in the secondary structure of milk protein and greater formation of larger aggregates.

Stability of milk proteins subjected to UHT treatments: challenges and future perspectives

Ultra-high temperature (UHT) treatments are of high economic relevance for food industries because they contribute to extending the shelf life of food products and facilitating their distribution. In the dairy segment, UHT treatments are applied to a wide range of products containing variable protein amounts. In this sense, the changes in the molecular structure of milk proteins induced by the severity of UHT treatments may lead to fouling in equipment during processing or sedimentation and/or gelation during storage. Nowadays, these concerns are even more relevant due to the increasing demand for UHT-treated high-protein beverages. This review will discuss the two main strategies used by industries to increase the stability of milk proteins during and/or after UHT treatments: (i) addition of chelating agents and (ii) use of polysaccharides. Moreover, the challenges and opportunities associated with promising strategies to improve the stability of milk proteins during and/or after UHT treatments will be covered in this review. The information compiled will be useful to guide researchers and industries in developing more stable UHT dairy products in harmony with consumers' demands.

Future Perspective and Technological Innovation in Cheese Making Using Artichoke (Cynara scolymus) as Vegetable Rennet: A Review

Milk coagulation is a process used for the formulation of different dairy products such as cheese. In this process, milk undergoes changes in its chemical stability thanks to acidification or enzymatic reactions. Traditionally, milk coagulation has been carried out with rennet of animal origin, but recently, the research of new types of rennet such as microbial rennet and vegetable rennet has increased. This study aims to present an organized review of the most relevant information on lactic coagulation, its relationship with vegetable rennets, and the importance of the botanical genus Cynara in the extraction of vegetable rennets, focusing on the coagulant potential of artichoke (Cynara scolymus). We conducted this literature review and found that lactic coagulation and vegetable rennets are linked through the enzymatic activity of the latter. The results of the main studies demonstrated a strong relationship between vegetable rennets and protease enzymes as well as the presence of these enzymes in extracts of cardoon (Cynara scolymus) and artichoke (Cynara scolymus). In addition, studies highlight the presence of thistle extracts in artisanal cheese preparations in the Iberian Peninsula. Based on the results of the studies, a comparison between cheeses made with vegetable rennet and those made with traditional rennet was also carried out. Although the results show that the use of vegetable rennet in the manufacture of cheese can confer undesirable characteristics, the use of extracts from Cynara plants demonstrates that vegetable rennets have an industrial potential, especially the one obtained from artichoke (Cynara scolymus) due to its high availability. Nevertheless, specific studies are required for a better understanding and application of this rennet.

Gastrointestinal digestibility of micellar casein dispersions: Effects of caprine vs bovine origin, and partial colloidal calcium depletion using in vitro digestion models for the adults and elderly

In vitro coagulation and digestion of caprine and bovine micellar casein concentrate (MCC) with or without partial colloidal calcium depletion (deCa) were studied under simulated adult and elderly conditions. Gastric clots were smaller and looser for caprine than bovine MCC, and were further looser with deCa and under elderly condition for both caprine and bovine MCC. Casein hydrolysis and concomitant formation of large peptides was faster for caprine than bovine MCC, and with deCa and under adult condition for caprine and bovine MCC. Formation of free amino groups and small peptides were faster for caprine MCC, and with deCa and under adult condition. Upon intestinal digestion, proteolysis occurred rapidly, and was faster under adult condition, but showed less differences with increasing digestion between caprine and bovine MCC, and with and without deCa. These results suggested weakened coagulation and greater digestibility for caprine MCC and MCC with deCa under both conditions.

Regenerated Fibers from Rennet-Treated Casein Micelles during Acidification

Micellar casein fibers of defined size and internal structure can be produced by the extrusion of cold-renneted casein micelles into a warm, calcium-rich coagulation bath. Calcium phosphate contacts within the casein matrix are important for fiber stability and production but become less important under acidic pH conditions. We demonstrate this with swelling experiments in media with pH < 2, which we adjust with citric acid of different molarities. In contrast to the simple swelling of dried casein fibers in water, a two-phase process takes place in citric acid similar to swelling in 1 N HCl. However, instead of a second deswelling step, we observe in citric acid that the fiber swells further. The observation is explained by a pH-dependent transition from a rennet casein gel to an acidified rennet gel. This can be simulated with a kinetic model that couples two second-order rate equations via a time-varying ratio. The final swelling values decrease with increasing proton concentration via a scaling relation, which is also confirmed by swelling in other acids (HCl or acetic acid) in this pH range. We attribute this to a decrease in the molecular weights of the aggregated casein structures within the strands of the gel network.

Application of small angle scattering (SAS) in structural characterisation of casein and casein-based products during digestion

In recent years, small and ultra-small angle scattering techniques, collectively known as small angle scattering (SAS) have been used to study various food structures during the digestion process. These techniques play an important role in structural characterisation due to the non-destructive nature (especially when using neutrons), various in situ capabilities and a large length scale (of 1 nm to ∼20 μm) they cover. The application of these techniques in the structural characterisation of dairy products has expanded significantly in recent years. Casein, a major dairy protein, forms the basis of a wide range of gel structures at different length scales. These gel structures have been extensively researched utilising scattering techniques to obtain structural information at the nano and micron scale that complements electron and confocal microscopy. Especially, neutrons have provided opportunity to study these gels in their natural environment by using various in situ options. One such example is understanding changes in casein gel structures during digestion in the gastrointestinal tract, which is essential for designing personalised food structures for a wide range of food-related diseases and improve health outcomes. In this review, we present an overview of casein gels investigated using small angle and ultra-small angle scattering techniques. We also reviewed their digestion using newly built setups recently employed in various research. To gain a greater understanding of micro and nano-scale structural changes during digestion, such as the effect of digestive juices and mechanical breakdown on structure, new setups for semi-solid food materials are needed to be optimised.

Differential effects of milk proteins on amino acid digestibility, post-prandial nitrogen utilization and intestinal peptide profiles in rats

OBJECTIVE

The aim of this study was to analyze the protein digestibility and postprandial metabolism in rats of milk protein matrices obtained by different industrial processes.

MATERIAL AND METHODS

The study was conducted on Wistar rats that consumed a meal containing different ¹⁵N-labeled milk proteins. Four milk matrices were tested: native micellar caseins (C1), caseins low in calcium (C2 low Ca²⁺), a matrix containing a ratio 63:37 of caseins and whey proteins (CW2) and whey proteins alone (W). Blood and urine were collected during the postprandial period and rats were euthanized 6 h after meal intake to collect digestive contents and organs.

RESULTS

Orocaecal digestibility values of amino acids ranged between 96.0 ± 0.2% and 96.6 ± 0.4% for C1-, C2 low Ca²⁺- and W-matrices, while this value was significantly lower for CW2 matrix (92.4 ± 0.5%). More dietary nitrogen was sequestered in the splanchnic area (intestinal mucosa and liver) as well as in plasma proteins after ingestion of W matrix, especially compared to the C1- and C2 low Ca²⁺-matrices. Peptidomic analysis showed that more milk protein-derived peptides were identified in the caecum of rats after the ingestion of the matrices containing caseins compared to W matrix.

CONCLUSION

We found that demineralization of micellar caseins did not modify its digestibility and postprandial metabolism. The low digestibility of the modified casein-to-whey ratio matrix may be ascribed to a lower accessibility of the protein to digestive enzymes due to changes in the protein structure, while the higher nitrogen splanchnic retention after ingestion of whey was probably due to the fast assimilation of its protein content. Finally, our results showed that industrial processes that modify the structure and/or composition of milk proteins influence protein digestion and utilization.

A mini-review about direct steam heating and its application in dairy and plant protein processing

The world's requirement for plant protein consumption is increasing. However, their application in different foods is limited due to their low techno-functionality. Heating is the most widely used method to improve the functionality of proteins. Compared to indirect tubular or plate heating methods, direct steam injection heating (DSIH) can heat the sample much faster, thus modifying the structure and functionality of protein differently. It is used in the sterilization of milk to minimize the heat-induced denaturation of whey proteins and the loss of volatiles. By contrast, its application in producing plant protein ingredients is seldom. This review summarizes recent research using DSIH to process dairy- and plant-based proteins and proposes future research perspectives. DSIH is a promising technique for producing functional protein ingredients. It is of particular interest to overcome the techno-functional hurdles of plant protein blends using DSIH to improve their behavior in different food matrices.

Impact of Physicochemical Modifications in Casein Promoted by UV-C on the Peptide Profile of Gastric Digestion and the Transepithelial Transport of Peptides

Caseins are the main proteins in milk, and their structure and spatial conformation are responsible for their slow digestion rate. The release of bioactive and β-casomorphin peptides from casein digestion may induce allergic responses during consumption. Spectroscopic techniques were used to observe the structural changes in casein conformation induced by Ultraviolet light irradiation (UV-C). Raman spectroscopy results showed more pronounced peaks at 618 and 640 cm^-1 for phenylalanine and tyrosine moieties of the photolyzed micellar casein, respectively, suggesting changes in the micelle structure. The decrease in the intensity of Raman signals for tryptophan and tyrosine corroborates to the UV-C-induced modifications of the micelle structure. Particle size distribution showed a decrease in the average micelle size after 15 min of UV-C exposure, while low-temperature, long-time (LTLT) pasteurization led to the formation of large aggregates, as observed by atomic force microscopy. UV-C did not impact the formation or transport of peptides, as observed by using the Caco-2 cell as a model for peptide absorption. However, the absence of the opioid peptide SRYPSY from κ-casein and only 20% of the concentration of opioid peptide RYLGY were noted. This work demonstrated that UV-C can be utilized to induce the physicochemical modification of dairy products, promoting a higher digestion rate and reducing allergenicity.

Multifunctional Milk-Derived Small Extracellular Vesicles and Their Biomedical Applications

In recent years, small extracellular vesicles (sEVs) have been regarded as the next generation of novel delivery systems after lipid nanoparticles because of their advantages and huge prospects in drug delivery. Studies have shown that sEVs are abundant in milk and therefore can be a large and economical source of sEVs. Natural milk-derived small extracellular vesicles (msEVs) have important functions such as immune regulation, anti-bacterial infection, anti-oxidative, etc., and play a beneficial role in human health at multiple levels, including intestinal health, bone/muscle metabolism, and microbiota regulation. In addition, because they can pass the gastrointestinal barrier and have low immunogenicity, good biocompatibility, and stability, msEVs are considered a crucial oral drug delivery vehicle. Moreover, msEVs can be further engineered for targeted delivery to prolong the circulation time or enhance local drug concentrations. However, msEVs separation and purification, complex contents, and quality control hinder their application in drug delivery. This paper provides a comprehensive review of the biogenesis and characteristics, isolation and purification, composition, loading methods, and function of msEVs, based on which their applications in biomedical fields are further explored.

Ultrathin Micellar Foam Films of Sodium Caseinate Protein Solutions

Sodium caseinates (NaCas), derived from milk proteins called caseins, are often added to food formulations as emulsifiers, foaming agents, and ingredients for producing dairy products. In this contribution, we contrast the drainage behavior of single foam films made with micellar NaCas solutions with well-established features of stratification observed for the micellar sodium dodecyl sulfate (SDS) foam films. In reflected light microscopy, the stratified SDS foam films display regions with distinct gray colors due to differences in interference intensity from coexisting thick-thin regions. Using IDIOM (interferometry digital imaging optical microscopy) protocols we pioneered for mapping nanotopography of foam films, we showed that drainage via stratification in SDS films proceeds by the expansion of flat domains that are thinner than surrounding by a concentration-dependent step-size, and nonflat features (nanoridges and mesas) form at the moving front. Furthermore, stratifying SDS foam films show stepwise thinning, such that the step-size and terminal film thickness decrease with concentration. Here we visualize the nanotopography in protein films with high spatiotemporal resolution using IDIOM protocols to address two long-standing questions. Do protein foam films formulated with NaCas undergo drainage via stratification? Are thickness transitions and variations in protein foam films determined by intermicellar interactions and supramolecular oscillatory disjoining pressure? In contrast with foam films containing micellar SDS, we find that micellar NaCas foam films display just one step, nonflat and noncircular domains that expand without forming nanoridges and a terminal thickness that increases with NaCas concentration. We infer that the differences in adsorbing and self-assembling unimers triumph over any similarities in the structure and interactions of their micelles.

Characteristics of Red Deer (Cervus elaphus) Milk: Lactational Changes in Composition and Processing Impacts on Structural and Gelation Properties

In an increasingly diversified global market, milk of minor dairy species has gained interest as a novel and premium source of nutrition. Relative to the major dairy species, much is lacking in our understanding of red deer (Cervus elaphus) milk. In this study, we characterized the compositions (macronutrients, minerals, fatty acids, and proteins) of red deer milk and their variations throughout lactation. We also investigated the structures, physical properties, and gelation (acid- and rennet-induced) properties of deer milk and how they are impacted by typical processing treatments (e.g., homogenization and pasteurization). We identified unique features in the composition of deer milk, including being richer in protein, fat, calcium, zinc, iodine, branched-chain fatty acids, and α-linolenic acid than other ruminant milks. Different deer milk components displayed diverse variation patterns over the lactation cycle, many of which were different from those demonstrated in other ruminant species. Other physicochemical features of deer milk were identified, such as its markedly larger fat globules. Processing treatments were demonstrated to alter the structural and gelation properties of deer milk. Most of the gelation properties of deer milk resembled that of bovine milk more than ovine and caprine milks. This study furthers our understanding of red deer milk and will aid in its processing and applications in novel products.

Effect of sodium alginate on the yogurt stability was dependent on the thickening effect and interaction between casein micelles and sodium alginate

The effect of sodium alginate (SA) on the yogurt stability and the related mechanisms were investigated. It was found that low-concentration SA (≤0.2 %) increased the yogurt stability, while high-concentration SA (≥0.3 %) decreased the yogurt stability. Sodium alginate increased the viscosity and viscoelasticity of yogurt and this effect was positively correlated with its concentration, suggesting that SA worked as the thickening agent in yogurt. However, addition of ≥0.3 % SA damaged the yogurt gel. These results suggested that interaction between milk protein and SA might play an important role in the yogurt stability besides the thickening effect. Addition of ≤0.2 % SA did not change the particle size of casein micelles. However, addition of ≥0.3 % SA induced aggregation of casein micelles and increased the size. And the aggregated casein micelles precipitated after 3 h storage. Isothermal titration calorimetry analysis showed that casein micelles and SA were thermodynamically incompatible. These results suggested that the interaction between casein micelles and SA induced aggregation and precipitation of casein micelles, which was critical in the destabilization of yogurt. In conclusion, the effect of SA on the yogurt stability was dependent on the thickening effect and the interaction between casein micelles and SA.