Metal binding affinity and selectivity in metalloproteins: insights from computational studies

CuO-NPs Induce Apoptosis and Functional Impairment in BV2 Cells Through the CSF-1R/PLCγ2/ERK/Nrf2 Pathway

Copper oxide nanoparticles (CuO-NPs) induce neurological diseases, including neurobehavioral defects and neurodegenerative diseases. Direct evidence indicates that CuO-NPs induce inflammation in the central nervous system and cause severe neurotoxicity. However, the mechanism of CuO-NP-induced damage to the nervous system has rarely been studied, and the toxicity of different CuO-NP particle sizes and their copper ion (Cu2+) precipitation in microglia (BV2 cells) is worth exploring. Therefore, this study investigated CuO-NPs with different particle sizes (small particle size: S-CuO-NPs; large particle size: L-CuO-NPs), Cu2+ with equal molar mass (replaced by CuCl2 [Equ group]), and Cu2+ precipitated in a cell culture solution with CuO-NPs (replaced by CuCl2 [Pre group]), and examined the mechanism of action of each on BV2 microglia after co-culture for 12 h and 24 h. The activity of BV2 cells decreased, the morphology was damaged, and the apoptosis rate increased in all the exposed groups. Toxicity increased time- and dose-dependently, and was highest in the Equ group, followed by the S-CuO-NPs, L-CuO-NPs, and Pre groups, respectively. Subsequently, we investigated the mechanism of S-CuO-NP-induced cell injury, and revealed that S-CuO-NPs induced oxidative stress and inflammatory response and increased the membrane permeability of BV2 cells. Moreover, S-CuO-NPs reduced the ratio of p-CSF-1R/CSF-1R, p-PLCγ2/PLCγ2, p-extracellular signal-regulated kinase (ERK)/ERK, p-Nrf2/Nrf2, and Bcl-2/Bax protein expression in microglia, and elevated cleaved caspase-3 expression. The CSF-1R/PLCγ2/ERK/Nrf2 apoptotic pathway was activated. The downregulation of CX3CR1, CSF-1R, brain-derived neurotrophic factor (BDNF), and IGF-1 protein expression indicates impairment of the repair and protection functions of microglia in the nervous system. In summary, our results reveal that CuO-NPs promote an increase in inflammatory molecules in BV2 microglia through oxidative stress, activate the CSF-1R/PLCγ2/ERK/Nrf2 pathway, cause apoptosis, and ultimately result in neurofunctional damage to microglia.

Structural insights into temperature-dependent dynamics of METPsc1, a miniaturized electron-transfer protein

The design of protein-metal complexes is rapidly advancing, with applications spanning catalysis, sensing, and bioremediation. We report a comprehensive investigation of METPsc1, a Miniaturized Electron Transfer Protein, in complex with cadmium. This study elucidates the impact of metal coordination on protein folding and structural dynamics across temperatures from 100 K to 300 K. Our findings reveal that METPsc1, composed of two similar halves stabilized by intramolecular hydrogen bonds, exhibits a unique "clothespin-like" recoil mechanism. This allows it to adapt to metal ions of varying radii, mirroring the flexibility observed in natural rubredoxins. High-resolution crystallography and molecular dynamics simulations unveil concerted backbone motions and subtle temperature-dependent shifts in side-chain conformations, particularly for residues involved in crystal packing. Notably, CdS bond lengths increase with temperature, correlating with anisotropic motions of the sulfur atoms involved in second-shell hydrogen bonding. This suggests a dynamic role of protein matrix upon redox cycling. These insights into METPsc1 highlight its potential for catalysis and contribute to the designing of artificial metalloproteins with functional plasticity.

Hydrophobic ion pairing: lipophilicity improvement of anionic macromolecules by divalent cation mediated complex formation

The aim of this study was to develop an alternative strategy to sufficiently increase the lipophilicity of anionic model macromolecules (MM) without the use of cationic counterions. Enoxaparin (ENO), insulin (INS) and poly-L-glutamic acid (PLG) were ion paired with anionic surfactants (sodium decanoate (DEC), sodium dodecyl sulfate (SDS), sodium stearate (SS) and sodium octadecyl sulfate (SOS)), mediated by divalent cations such as magnesium, calcium and zinc. Complexes were evaluated regarding their precipitation efficiency and logDn-butanol/water. SEDDS were developed, loaded with the complexes and characterized for their size and stability. Finally, payloads and logDSEDDS/release medium were determined. Divalent cation mediated ENO, INS and PLG complexes were successfully formed as underlined by high precipitation efficiencies above 90% in case of Zn2+-mediated complexes. Most pronounced increase in logDn-butanol/water was achieved for ENO-Zn2+-SOS (1.85), INS-Zn2+-SOS (0.80) and PLG-Zn2+-SS (0.48) providing suitable solubilities in commonly used SEDDS components. Developed SEDDS displayed droplet sizes below 200 nm without major changes after loading with MM complexes. Payloads up to 18.72 mg/ml could be achieved in developed SEDDS for ENO-Zn2+-SOS, and 2.44 mg/ml and 6.93 mg/ml for INS-Zn2+-SOS and PLG-Zn2+-SS, respectively. In general, highest lipophilicity enhancement and thus solubility in SEDDS was obtained with Zn2+-mediated complexes among the investigated cations and particularly with the highly negatively charged polysaccharide ENO. The formation of complexes between anionic MM and anionic surfactants mediated by divalent cations, substituting normally used cationic counterions exhibiting higher toxicity, offers a promising alternative to enhance their lipophilicity for oral drug delivery.

MetalTrans: A Biological Language Model-Based Approach for Predicting Disease-Associated Mutations in Protein Metal-Binding Sites

The critical importance of accurately predicting mutations in protein metal-binding sites for advancing drug discovery and enhancing disease diagnostic processes cannot be overstated. In response to this imperative, MetalTrans emerges as an accurate predictor for disease-associated mutations in protein metal-binding sites. The core innovation of MetalTrans lies in its seamless integration of multifeature splicing with the Transformer framework, a strategy that ensures exhaustive feature extraction. Central to MetalTrans's effectiveness is its deep feature combination strategy, which merges evolutionary-scale modeling amino acid embeddings with ProtTrans embeddings, thus shedding light on the biochemical properties of proteins. Employing the Transformer component, MetalTrans leverages the self-attention mechanism to delve into higher-level representations. Utilizing mutation site information for feature fusion not only enriches the feature set but also sidesteps the common pitfall of overestimation linked to protein sequence-based predictions. This nuanced approach to feature fusion is a key differentiator, enabling MetalTrans to outperform existing methods significantly, as evidenced by comparative analyses. Our evaluations across varied metal binding site data sets (specifically Zn, Ca, Mg, and Mix) underscore MetalTrans's superior performance, which achieved the average AUC values of 0.971, 0.965, 0.980, and 0.945 on multiple 5-fold cross-validation, respectively. Remarkably, against the multichannel convolutional neural network method on a benchmark independent test set, MetalTrans demonstrated unparalleled robustness and superiority, boasting the AUC score of 0.998 on multiple 5-fold cross-validation. Our comprehensive examination of the predicted outcomes further confirms the effectiveness of the model. The source codes, data sets, and prediction results for MetalTrans can be accessed for academic usage at https://github.com/EduardWang/MetalTrans.

Diverse crystalline protein scaffolds through metal-dependent polymorphism

As protein crystals are increasingly finding diverse applications as scaffolds, controlled crystal polymorphism presents a facile strategy to form crystalline assemblies with controllable porosity with minimal to no protein engineering. Polymorphs of consensus tetratricopeptide repeat proteins with varying porosity were obtained through co-crystallization with metal salts, exploiting the innate metal ion geometric requirements. A single structurally exposed negative amino acid cluster was responsible for metal coordination, despite the abundance of negatively charged residues. Density functional theory calculations showed that while most of the crystals were the most thermodynamically stable assemblies, some were kinetically trapped states. Thus, crystalline porosity diversity is achieved and controlled with metal coordination, opening a new scope in the application of proteins as biocompatible protein-metal-organic frameworks (POFs). In addition, metal-dependent polymorphic crystals allow direct comparison of metal coordination preferences.

Flexibility of Binding Site is Essential to the Ca2+ Selectivity in EF-Hand Calcium-Binding Proteins

High binding affinity and selectivity of metal ions are essential to the function of metalloproteins. Thus, understanding the factors that determine these binding characteristics is of major interest for both fundamental mechanistic investigations and guiding of the design of novel metalloproteins. In this work, we perform QM cluster model calculations and quantum mechanics/molecular mechanics (QM/MM) free energy simulations to understand the binding selectivity of Ca2+ and Mg2+ in the wild-type carp parvalbumin and its mutant. While a nonpolarizable MM model (CHARMM36) does not lead to the correct experimental trend, treatment of the metal binding site with the DFTB3 model in a QM/MM framework leads to relative binding free energies (ΔΔGbind) comparable with experimental data. For the wild-type (WT) protein, the calculated ΔΔGbind is ∼6.6 kcal/mol in comparison with the experimental value of 5.6 kcal/mol. The good agreement highlights the value of a QM description of the metal binding site and supports the role of electronic polarization and charge transfer to metal binding selectivity. For the D51A/E101D/F102W mutant, different binding site models lead to considerable variations in computed binding affinities. With a coordination number of seven for Ca2+, which is shown by QM/MM metadynamics simulations to be the dominant coordination number for the mutant, the calculated relative binding affinity is ∼4.8 kcal/mol, in fair agreement with the experimental value of 1.6 kcal/mol. The WT protein is observed to feature a flexible binding site that accommodates a range of coordination numbers for Ca2+, which is essential to the high binding selectivity for Ca2+ over Mg2+. In the mutant, the E101D mutation reduces the flexibility of the binding site and limits the dominant coordination number of Ca2+ to be seven, thereby leading to reduced binding selectivity against Mg2+. Our results highlight that the binding selectivity of metal ions depends on both the structural and dynamical properties of the protein binding site.

Discovery of Novel Metalloenzyme Inhibitors Based on Property Characterization: Strategy and Application for HDAC1 Inhibitors

Metalloenzymes are ubiquitously present in the human body and are relevant to a variety of diseases. However, the development of metalloenzyme inhibitors is limited by low specificity and poor drug-likeness associated with metal-binding fragments (MBFs). A generalized drug discovery strategy was established, which is characterized by the property characterization of zinc-dependent metalloenzyme inhibitors (ZnMIs). Fifteen potential Zn2+-binding fragments (ZnBFs) were identified, and a customized pharmacophore feature was defined based on these ZnBFs. The customized feature was set as a required feature and applied to a search for novel inhibitors for histone deacetylase 1 (HDAC1). Ten potential HDAC1 inhibitors were recognized, and one of them (compound 9) was a known potent HDAC1 inhibitor. The results demonstrated the effectiveness of our strategy to identify novel inhibitors for zinc-dependent metalloenzymes.

Hydration numbers of biologically relevant divalent metal cations from ab initio molecular dynamics and continuum solvation methods

Hydration and, in particular, the coordination number of a metal ion is of paramount importance as it defines many of its (bio)physicochemical properties. It is not only essential for understanding its behavior in aqueous solutions but also determines the metal ion reference state and its binding energy to (bio)molecules. In this paper, for divalent metal cations Ca2+, Cd2+, Cu2+, Fe2+, Hg2+, Mg2+, Ni2+, Pb2+, and Zn2+, we compare two approaches for predicting hydration numbers: (1) a mixed explicit/continuum DFT-D3//COSMO-RS solvation model and (2) density functional theory based ab initio molecular dynamics. The former approach is employed to calculate the Gibbs free energy change for the sequential hydration reactions, starting from [M(H2O)2]2+ aqua complexes to [M(H2O)9]2+, allowing explicit water molecules to bind in the first or second coordination sphere and determining the most stable [M(H2O)n]2+ structure. In the latter approach, the hydration number is obtained by integrating the ion-water radial distribution function. With a couple of exceptions, the metal ion hydration numbers predicted by the two approaches are in mutual agreement, as well as in agreement with the experimental data.

Magnesium Oxide (MgO) Nanoparticles: Synthetic Strategies and Biomedical Applications

In recent times, there has been considerable interest among researchers in magnesium oxide (MgO) nanoparticles, due to their excellent biocompatibility, stability, and diverse biomedical uses, such as antimicrobial, antioxidant, anticancer, and antidiabetic properties, as well as tissue engineering, bioimaging, and drug delivery applications. Consequently, the escalating utilization of magnesium oxide nanoparticles in medical contexts necessitates the in-depth exploration of these nanoparticles. Notably, existing literature lacks a comprehensive review of magnesium oxide nanoparticles’ synthesis methods, detailed biomedical applications with mechanisms, and toxicity assessments. Thus, this review aims to bridge this gap by furnishing a comprehensive insight into various synthetic approaches for the development of MgO nanoparticles. Additionally, it elucidates their noteworthy biomedical applications as well as their potential mechanisms of action, alongside summarizing their toxicity profiles. This article also highlights challenges and future prospects for further exploring MgO nanoparticles in the biomedical field. Existing literature indicates that synthesized magnesium oxide nanoparticles demonstrate substantial biocompatibility and display significant antibacterial, antifungal, anticancer, and antioxidant properties. Consequently, this review intends to enhance readers’ comprehension regarding recent advancements in synthesizing MgO nanoparticles through diverse approaches and their promising applications in biomedicine.

Functionalized ZnO-Based Nanocomposites for Diverse Biological Applications: Current Trends and Future Perspectives

The wide array of structures and characteristics found in ZnO-based nanostructures offers them a versatile range of uses. Over the past decade, significant attention has been drawn to the possible applications of these materials in the biomedical field, owing to their distinctive electronic, optical, catalytic, and antimicrobial attributes, alongside their exceptional biocompatibility and surface chemistry. With environmental degradation and an aging population contributing to escalating healthcare needs and costs, particularly in developing nations, there's a growing demand for more effective and affordable biomedical devices with innovative functionalities. This review delves into particular essential facets of different synthetic approaches (chemical and green) that contribute to the production of effective multifunctional nano-ZnO particles for biomedical applications. Outlining the conjugation of ZnO nanoparticles highlights the enhancement of biomedical capacity while lowering toxicity. Additionally, recent progress in the study of ZnO-based nano-biomaterials tailored for biomedical purposes is explored, including biosensing, bioimaging, tissue regeneration, drug delivery, as well as vaccines and immunotherapy. The final section focuses on nano-ZnO particles' toxicity mechanism with special emphasis to their neurotoxic potential, as well as the primary toxicity pathways, providing an overall review of the up-to-date development and future perspectives of nano-ZnO particles in the biomedicine field.

Crystal structures of Streptomyces tsukubaensis sigma factor SigG1 and anti-sigma RsfG

Transcription of specific genes in bacteria under environmental stress is frequently initiated by extracytoplasmic function (ECF) σ factors. ECFs σ factors harbour two conserved domains, σ2 and σ4, for transcription initiation by recognition of the promoter region and recruitment of RNA polymerase (RNAP). The crystal structure of Streptomyces tsukubaensis SigG1, an ECF56-family σ factor, was determined revealing σ2, σ4 and the additional carboxi-terminal domain SnoaL_2 tightly packed in a compact conformation. The structure of anti-sigma RsfG was also determined by X-ray crystallography and shows a rare β-barrel fold. Analysis of the metal binding motifs inside the protein barrel are consistent with Fe(III) binding, which is in agreement with previous findings that the Streptomyces tsukubaensis ECF56 SigG1-RsfG system is involved in metal-ion homeostasis.

Copper Forms a PPII Helix-Like Structure with the Catalytic Domains of Bacterial Zinc Metalloproteases

The rapid spread of antibiotic-resistant bacteria continuously raises concerns about the future ineffectiveness of current antimicrobial treatments against infectious diseases. To address this problem, new therapeutic strategies and antimicrobial drugs with unique modes of action are urgently needed. Inhibition of metalloproteases, bacterial virulence factors, is a promising target for the development of antibacterial treatments. In this study, the interaction among Zn(II), Cu(II), and the metal-binding domains of two metalloproteases, AprA (Pseudomonas aureginosa) and CpaA (Acinetobacter baumanii), was investigated. The objective was to determine the coordination sphere of Zn(II) with a peptide model of two zinc-dependent metalloproteases. Additionally, the study explored the formation of Cu(II) complexes with the domains, as Cu(II) has been shown to inhibit metalloproteases. The third aim was to understand the role of nonbinding amino acids in stabilizing the metal complexes formed by these proteases. This work identified specific coordination patterns (HExxHxxxxxH) for both Zn(II) and Cu(II) complexes, with AprA and CpaA exhibiting a higher affinity for Cu(II) compared to Zn(II). The study also found that the CpaA domain has greater stability for both Zn(II) and Cu(II) complexes compared to AprA. The nonbinding amino acids of CpaA surrounding the metal ion contribute to the increased thermodynamic stability of the metal-peptide complex through various intramolecular interactions. These interactions can also influence the secondary structures of the peptides. The presence of certain amino acids, such as tyrosine, arginine, and glutamic acid, and their interactions contribute to the stability and, only in the case of Cu(II) complexes, the formation of a rare protein structure called a left-handed polyproline II helix (PPII), which is known to play a role in the stability and function of various proteins. These findings provide valuable insights into the coordination chemistry of bacterial metalloproteases and expand our understanding of potential mechanisms for inhibiting these enzymes.

Rules governing metal coordination in Aβ-Zn(II) complex models from quantum mechanical calculations

Transition metals directly contribute to the neurotoxicity of the aggregates of the amyloid-forming Aβ peptide. The understanding and rationalization of the coordination modes of metals to Aβ amyloid is, therefore, of paramount importance to understand the capacity of a given metal to promote peptide aggregation. Experimentally, multiple Aβ-metal structures have been resolved, which exhibit different modes of coordination in both the monomeric and oligomeric forms of Aβ. Although Zn(II) metalloproteins are very abundant and often involve cysteine residues in the first coordination shell, in the case of Aβ-Zn(II), though, Zn(II) is coordinated by glutamic/aspartic acid and/or histidine residues exclusively, making for an interesting case study. Here we present a systematic analysis of the underlying chemistry on Aβ-Zn(II) coordination, where relative stabilities of different coordination arrangements indicate that a mixture of Glu/Asp and His residues is favored. A detailed comparison between different coordination shell geometries shows that tetrahedral coordination is generally favored in the aqueous phase. Our calculations show an interplay between dative covalent interactions and electrostatics which explains the observed trends. Multiple structures deposited in the Protein Data Bank support our findings, suggesting that the trends found in our work may be transferable to other Zn(II) metalloproteins with this type of coordination.

Influence of metal binding on the conformational landscape of neurofilament peptides

In order to understand the preferred modes of chelation in metal-binding peptides, quantum mechanical calculations can be used to compute energies, resulting in a hierarchy of binding affinities. These calculations often produce increasing stabilization energies the higher the coordination of the complex. However, as the coordination of a metal increases, the conformational freedom of the polypeptide chain is inevitably reduced, resulting in an entropic penalty. Estimating the magnitude of this penalty from the many different degrees of freedom of biomolecular systems is very challenging, and as a result this contribution to the free energy is often ignored. Here we explore this problem focusing on a family of phosphorylated neuropeptides that bind to aluminum. We find that there is a general negative correlation between both stabilization energy and entropy. Our results suggest that a subtle interplay between enthalpic and entropic forces will determine the population of the most favourable species. Additionally, we discuss the requirements for a possible "Metal Ion Hypothesis" based on our findings.

Oxidoreductases and metal cofactors in the functioning of the earth

Life sustains itself using energy generated by thermodynamic disequilibria, commonly existing as redox disequilibria. Metals are significant players in controlling redox reactions, as they are essential components of the engine that life uses to tap into the thermodynamic disequilibria necessary for metabolism. The number of proteins that evolved to catalyze redox reactions is extraordinary, as is the diversification level of metal cofactors and catalytic domain structures involved. Notwithstanding the importance of the topic, the relationship between metals and the redox reactions they are involved in has been poorly explored. This work reviews the structure and function of different prokaryotic organometallic-protein complexes, highlighting their pivotal role in controlling biogeochemistry. We focus on a specific subset of metal-containing oxidoreductases (EC1 or EC7.1), which are directly involved in biogeochemical cycles, i.e., at least one substrate or product is a small inorganic molecule that is or can be exchanged with the environment. Based on these inclusion criteria, we select and report 59 metalloenzymes, describing the organometallic structure of their active sites, the redox reactions in which they are involved, and their biogeochemical roles.

Atomically Accurate Design of Metalloproteins with Predefined Coordination Geometries

We report a new computational protein design method for the construction of oligomeric protein assemblies around metal centers with predefined coordination geometries. We apply this method to design two homotrimeric assemblies, Tet4 and TP1, with tetrahedral and trigonal-pyramidal tris(histidine) metal coordination geometries, respectively, and demonstrate that both assemblies form the targeted metal centers with ≤0.2 Å accuracy. Although Tet4 and TP1 are constructed from the same parent protein building block, they are distinct in terms of their overall architectures, the environment surrounding the metal centers, and their metal-based reactivities, illustrating the versatility of our approach.

Copper oxide nanoparticles: In vitro and in vivo toxicity, mechanisms of action and factors influencing their toxicology

Copper oxide nanoparticles (CuO NPs) have received increasing interest due to their distinctive properties, including small particle size, high surface area, and reactivity. Due to these properties, their applications have been expanded rapidly in various areas such as biomedical properties, industrial catalysts, gas sensors, electronic materials, and environmental remediation. However, because of these widespread uses, there is now an increased risk of human exposure, which could lead to short- and long-term toxicity. This review addresses the underlying toxicity mechanisms of CuO NPs in cells which include reactive oxygen species generation, leaching of Cu ion, coordination effects, non-homeostasis effect, autophagy, and inflammation. In addition, different key factors responsible for toxicity, characterization, surface modification, dissolution, NPs dose, exposure pathways and environment are discussed to understand the toxicological impact of CuO NPs. In vitro and in vivo studies have shown that CuO NPs cause oxidative stress, cytotoxicity, genotoxicity, immunotoxicity, neurotoxicity, and inflammation in bacterial, algal, fish, rodents, and human cell lines. Therefore, to make CuO NPs a more suitable candidate for various applications, it is essential to address their potential toxic effects, and hence, more studies should be done on the long-term and chronic impacts of CuO NPs at different concentrations to assure the safe usage of CuO NPs.

Insights into heavy metals shock on anammox systems: Cell structure-based mechanisms and new challenges

Anaerobic ammonium oxidation (anammox) as a low-carbon and energy-saving technology, has shown unique advantages in the treatment of high ammonia wastewater. However, wastewater usually contains complex heavy metals (HMs), which pose a potential risk to the stable operation of the anammox system. This review systematically re-evaluates the HMs toxicity level from the inhibition effects and the inhibition recovery process, which can provide a new reference for engineering. From the perspective of anammox cell structure (extracellular, anammoxosome membrane, anammoxosome), the mechanism of HMs effects on cellular substances and metabolism is expounded. Furthermore, the challenges and research gaps for HMs inhibition in anammox research are also discussed. The clarification of material flow, energy flow and community succession under HMs shock will help further reveal the inhibition mechanism. The development of new recovery strategies such as bio-accelerators and bio-augmentation is conductive to breaking through the engineered limitations of HMs on anammox. This review provides a new perspective on the recognition of toxicity and mechanism of HMs in the anammox process, as well as the promotion of engineering applicability.

Potentiometric Studies on Binary and Ternary Complexes of Ni(II) and Cu(II) Ions with L-Valine and Paracetamol

The protonation constants of the free ligands and the stability constants of binary and ternary complexes of bivalent metal ions of Ni(II) and Cu(II) with a biologically important amino acid of L-valine, Val, and paracetamol, Para, were studied potentiometrically in aqueous solutions at 313.15 ± 0.1 K and a fixed ionic strength of I = 0.10 M NaCl. The complexation model for each system was established using the Irving-Rossotti equation. The formation of the 1:2 or 1:1 binary complexes and 1:1:1 ternary complexes in which the amino acid Val was used as the primary ligand and Para as the secondary ligand, as inferred from the corresponding potentiometric pH-metric titration curves, and their relative stabilities compared to the corresponding ML and ML2 binary complexes are expressed in terms of statistical parameters ∆logK, logK1 and logK2. The complex stability was found to follow the order of Cu(II) > Ni(II). Through these diagnostic studies, it was possible to give the general formula of compounds prepared from amino acids and paracetamol. Amino acid binds to the central ion through oxygen in the hydroxyl group and nitrogen atom in the amine group (-NH2), whereas paracetamol forms a unipolar bond by binding to the concentrated ion through the oxygen atom in the hydroxyl group. Most of the nickel complexes had octahedral symmetry with valine and paracetamol ligands, while the copper complexes had square or hierarchical to square base symmetry.

GPDOCK: highly accurate docking strategy for metalloproteins based on geometric probability

Accurately predicting the interaction modes for metalloproteins remains extremely challenging in structure-based drug design and mechanism analysis of enzymatic catalysis due to the complexity of metal coordination in metalloproteins. Here, we report a docking method for metalloproteins based on geometric probability (GPDOCK) with unprecedented accuracy. The docking tests of 10 common metal ions with 9360 metalloprotein-ligand complexes demonstrate that GPDOCK has an accuracy of 94.3% in predicting binding pose. What is more, it can accurately realize the docking of metalloproteins with ligand when one or two water molecules are engaged in the metal ion coordination. Since GPDOCK only depends on the three-dimensional structure of metalloprotein and ligand, structure-based machine learning model is employed for the scoring of binding poses, which significantly improves computational efficiency. The proposed docking strategy can be an effective and efficient tool for drug design and further study of binding mechanism of metalloproteins. The manual of GPDOCK and the code for the logistical regression model used to re-rank the docking results are available at https://github.com/wangkai-zhku/GPDOCK.git.

From quantum-derived principles underlying cysteine reactivity to combating the COVID-19 pandemic

The COVID-19 pandemic poses a challenge in coming up with quick and effective means to counter its cause, the SARS-CoV-2. Here, we show how the key factors governing cysteine reactivity in proteins derived from combined quantum mechanical/continuum calculations led to a novel multi-targeting strategy against SARS-CoV-2, in contrast to developing potent drugs/vaccines against a single viral target such as the spike protein. Specifically, they led to the discovery of reactive cysteines in evolutionary conserved Zn2+-sites in several SARS-CoV-2 proteins that are crucial for viral polypeptide proteolysis as well as viral RNA synthesis, proofreading, and modification. These conserved, reactive cysteines, both free and Zn2+-bound, can be targeted using the same Zn-ejector drug (disulfiram/ebselen), which enables the use of broad-spectrum anti-virals that would otherwise be removed by the virus's proofreading mechanism. Our strategy of targeting multiple, conserved viral proteins that operate at different stages of the virus life cycle using a Zn-ejector drug combined with other broad-spectrum anti-viral drug(s) could enhance the barrier to drug resistance and antiviral effects, as compared to each drug alone. Since these functionally important nonstructural proteins containing reactive cysteines are highly conserved among coronaviruses, our proposed strategy has the potential to tackle future coronaviruses. This article is categorized under:Structure and Mechanism > Reaction Mechanisms and CatalysisStructure and Mechanism > Computational Biochemistry and BiophysicsElectronic Structure Theory > Density Functional Theory.

Utility of Biogenic Iron and Its Bimetallic Nanocomposites for Biomedical Applications: A Review

Nanotechnology mainly deals with the production and application of compounds with dimensions in nanoscale. Given their dimensions, these materials have considerable surface/volume ratios, and hence, specific characteristics. Nowadays, environmentally friendly procedures are being proposed for fabrication of Fe nanoparticles because a large amount of poisonous chemicals and unfavorable conditions are needed to prepare them. This work includes an inclusive overview on the economical and green procedures for the preparation of such nanoparticles (flower, fruits, tea, carbohydrates, and leaves). Pure and bimetallic iron nanoparticles, for instance, offer a high bandwidth and excitation binding energy and are applicable in different areas ranging from antibacterial, anticancer, and bioimaging agents to drug delivery systems. Preparation of nano-sized particles, such as those of Fe, requires the application of high quantities of toxic materials and harsh conditions, and naturally, there is a tendency to develop more facile and even green pathways (Sultana, Journal of Materials Science & Technology, 2013, 29, 795–800; Bushra et al., Journal of hazardous materials, 2014, 264, 481–489; Khan et al., Ind. Eng. Chem. Res., 2015, 54, 76–82). This article tends to provide an overview on the reports describing green and biological methods for the synthesis of Fe nanoparticles. The present review mainly highlights selenium nanoparticles in the biomedical domain. Specifically, this review will present detailed information on drug delivery, bioimaging, antibacterial, and anticancer activity. It will also focus on procedures for their green synthesis methods and properties that make them potential candidates for various biomedical applications. Finally, we provide a detailed future outlook.

Recent progress in nanomaterial-based bioelectronic devices for biocomputing system

Bioelectronic devices have received the massive attention because of their huge potential to develop the core electronic components for biocomputing system. Up to now, numerous bioelectronic devices have been reported such as biomemory and biologic gate by employment of biomolecules including metalloproteins and nucleic acids. However, the intrinsic limitations of biomolecules such as instability and low signal production hinder the development of novel bioelectronic devices capable of performing various novel computing functions. As a way to overcome these limitations, nanomaterials have the great potential and wide applicability to grant and extend the electronic functions, and improve the inherent properties from biomolecules. Accordingly, lots of nanomaterials including the conductive metal, graphene, and transition metal dichalcogenide nanomaterials are being used to develop the remarkable functional bioelectronic devices like the multi-bit biomemory and resistive random-access biomemory. This review discusses the nanomaterial-based superb bioelectronic devices including the biomemory, biologic gates, and bioprocessors. In conclusion, this review will provide the interdisciplinary information about utilization of various novel nanomaterials applicable for biocomputing system.

Dietary exposure of copper and zinc oxides nanoparticles affect the fitness, enzyme activity, and microbial community of the model insect, silkworm Bombyx mori

Copper and Zinc oxides nanoparticles (CuO and ZnO NPs, respectively) are among the most produced and commonly used engineered nanomaterials. They can be released into the environment, thereby causing health concerns and risks to biodiversity that indicate a need to evaluate their toxicological effects in a complex situation. Here, we used the insect model organism silkworm Bombyx mori to address the concerns about the biological effects associated with dietary exposure of CuO and ZnO NPs. ICP-MS analysis revealed significant accumulation of Cu and Zn (the latter being more accumulated) in silkworms' tissues (gut, fat body, silk gland, and malpighian tubule), and some elimination through feces in the respective NPs-exposed groups. NPs-exposures led to a decrease in larval body mass, survivorship, and cocoon production, where the effects of ZnO NPs were more pronounced. We also found that NPs-exposure induced gene expression changes (Attacin, lysozyme, SOD, and Dronc) and altered the activities of antioxidant enzymes (SOD, GST, and CAT), as well as impaired nutrient metabolism (alpha-amylase). Given their antibacterial property, CuO and ZnO NPs decreased species richness and diversity of the gut bacterial community and shifted their configuration to overt microbiome i.e., decreased abundance of probiotics (e.g., Acetobacter) and increased pathobionts (e.g., Pseudomonas, Bacillus, Escherichia, Enterococcus, Ralstonia, etc.) proportions. Overall, this integrated study revealed the unintended negative effects of CuO and ZnO NPs on silkworms and highlighted the potential to inevitably affect all living things due to intensive and possible mishandling of nanomaterials.

Thymosin β4 Is an Endogenous Iron Chelator and Molecular Switcher of Ferroptosis

Thymosin β4 (Tβ4) was extracted forty years agofrom calf thymus. Since then, it has been identified as a G-actin binding protein involved in blood clotting, tissue regeneration, angiogenesis, and anti-inflammatory processes. Tβ4 has also been implicated in tumor metastasis and neurodegeneration. However, the precise roles and mechanism(s) of action of Tβ4 in these processes remain largely unknown, with the binding of the G-actin protein being insufficient to explain these multi-actions. Here we identify for the first time the important role of Tβ4 mechanism in ferroptosis, an iron-dependent form of cell death, which leads to neurodegeneration and somehow protects cancer cells against cell death. Specifically, we demonstrate four iron2+ and iron3+ binding regions along the peptide and show that the presence of Tβ4 in cell growing medium inhibits erastin and glutamate-induced ferroptosis in the macrophage cell line. Moreover, Tβ4 increases the expression of oxidative stress-related genes, namely BAX, hem oxygenase-1, heat shock protein 70 and thioredoxin reductase 1, which are downregulated during ferroptosis. We state the hypothesis that Tβ4 is an endogenous iron chelator and take part in iron homeostasis in the ferroptosis process. We discuss the literature data of parallel involvement of Tβ4 and ferroptosis in different human pathologies, mainly cancer and neurodegeneration. Our findings confronted with literature data show that controlled Tβ4 release could command on/off switching of ferroptosis and may provide novel therapeutic opportunities in cancer and tissue degeneration pathologies.

Unravelling the Structure of the Tetrahedral Metal-Binding Site in METP3 through an Experimental and Computational Approach

Understanding the structural determinants for metal ion coordination in metalloproteins is a fundamental issue for designing metal binding sites with predetermined geometry and activity. In order to achieve this, we report in this paper the design, synthesis and metal binding properties of METP3, a homodimer made up of a small peptide, which self assembles in the presence of tetrahedrally coordinating metal ions. METP3 was obtained through a redesign approach, starting from the previously developed METP molecule. The undecapeptide sequence of METP, which dimerizes to house a Cys₄ tetrahedral binding site, was redesigned in order to accommodate a Cys₂His₂ site. The binding properties of METP3 were determined toward different metal ions. Successful assembly of METP3 with Co(II), Zn(II) and Cd(II), in the expected 2:1 stoichiometry and tetrahedral geometry was proven by UV-visible spectroscopy. CD measurements on both the free and metal-bound forms revealed that the metal coordination drives the peptide chain to fold into a turned conformation. Finally, NMR data of the Zn(II)-METP3 complex, together with a retrostructural analysis of the Cys-X-X-His motif in metalloproteins, allowed us to define the model structure. All the results establish the suitability of the short METP sequence for accommodating tetrahedral metal binding sites, regardless of the first coordination ligands.

Thermolabile Cross-Linkers for Templating Precise Multicomponent Metal-Organic Framework Pores

While a number of approaches toward multicomponent metal-organic frameworks have been reported, new strategies affording greater structural versatility and molecular precision are needed to replicate the sophisticated active sites found in enzymes. Here, we outline a general method for templating functional groups within framework pores using thermolabile ligand cross-linkers. We show that tertiary ester-based cross-linkers can be used to install well-defined carboxylic acid pairs at precise relative distances and orientations. The tertiary ester linkages remain intact during framework formation but are readily cleaved to reveal free carboxylic acids upon microwave heating. Successful cross-linker synthesis, framework incorporation, and thermolysis is demonstrated using the mesoporous, terphenyl expanded analogues of MOF-74. When short cross-linkers are used, modeling studies show that the carboxylic acids are installed in a single configuration down the pore channels, spaced ∼7 Å apart. These precisely positioned acid pairs can be used as synthetic handles to build up more complex cooperative active sites.

Metallo-β-lactamases in the Age of Multidrug Resistance: From Structure and Mechanism to Evolution, Dissemination, and Inhibitor Design

Antimicrobial resistance is one of the major problems in current practical medicine. The spread of genes coding for resistance determinants among bacteria challenges the use of approved antibiotics, narrowing the options for treatment. Resistance to carbapenems, last resort antibiotics, is a major concern. Metallo-β-lactamases (MBLs) hydrolyze carbapenems, penicillins, and cephalosporins, becoming central to this problem. These enzymes diverge with respect to serine-β-lactamases by exhibiting a different fold, active site, and catalytic features. Elucidating their catalytic mechanism has been a big challenge in the field that has limited the development of useful inhibitors. This review covers exhaustively the details of the active-site chemistries, the diversity of MBL alleles, the catalytic mechanism against different substrates, and how this information has helped developing inhibitors. We also discuss here different aspects critical to understand the success of MBLs in conferring resistance: the molecular determinants of their dissemination, their cell physiology, from the biogenesis to the processing involved in the transit to the periplasm, and the uptake of the Zn(II) ions upon metal starvation conditions, such as those encountered during an infection. In this regard, the chemical, biochemical and microbiological aspects provide an integrative view of the current knowledge of MBLs.

CH Mode Mixing Determines the Band Shape of the Carboxylate Symmetric Stretch in Apo-EDTA, Ca2+-EDTA, and Mg2+-EDTA

The infrared spectra of EDTA complexed with Ca²⁺ and Mg²⁺ contain, to date, unidentified vibrational bands. This study assigns the peaks in the linear and two-dimensional infrared spectra of EDTA, with and without either Ca²⁺ or Mg²⁺ ions. Two-dimensional infrared spectroscopy and DFT calculations reveal that, in both the presence and absence of ions, the carboxylate symmetric stretch and the terminal CH bending vibrations mix. We introduce a method to calculate participation coefficients that quantify the contribution of the carboxylate symmetric stretch, CH wag, CH twist, and CH scissor in the 1400-1550 cm^-1 region. With the help of participation coefficients, we assign the 1400-1430 cm^-1 region to the carboxylate symmetric stretch, which can mix with CH modes. We assign the 1000-1380 cm^-1 region to CH twist modes, the 1380-1430 cm^-1 region to wag modes, and the 1420-1650 cm^-1 region to scissor modes. The difference in binding geometry between the carboxylate-Ca²⁺ and carboxylate-Mg²⁺ complex manifests as new diagonal and cross-peaks between the mixed modes in the two complexes. The small Mg²⁺ ion binds EDTA tighter than the Ca²⁺ ion, which causes a redshift of the COO symmetric stretches of the sagittal carboxylates. Energy decomposition analysis further characterizes the importance of electrostatics and deformation energy in the bound complexes.

Metal Binding Antimicrobial Peptides in Nanoparticle Bio-functionalization: New Heights in Drug Delivery and Therapy

Peptides are considered very important due to the diversity expressed through their amino acid sequence, structure variation, large spectrum, and their essential role in biological systems. Antimicrobial peptides (AMPs) emerged as a potent tool in therapy owing to their antimicrobial properties but also their ability to trespass the membranes, specificity, and low toxicity. They comprise a variety of peptides from which specific amino acid-rich peptides are of interest to the current review due to their features in metal interaction and cell penetration. Histidine-rich peptides such as Histatins belong to the metal binding salivary residing peptides with efficient antibacterial, antifungal, and wound-healing activities. Furthermore, their ability to activate in acidic environment attracted the attention to their potential in therapy. The current review covers the current knowledge about AMPs and critically assess the potential of associating with metal ions both structurally and functionally. This review provides interesting hints for the advantages provided by AMPs and metal ions in biomedicine, making use of their direct properties in brain diseases therapy or in the creation of new bio-functionalized nanoparticles for cancer diagnosis and treatment.

Force Field Parameters for Fe2+4S2-4 Clusters of Dihydropyrimidine Dehydrogenase, the 5-Fluorouracil Cancer Drug Deactivation Protein: A Step towards In Silico Pharmacogenomics Studies

The dimeric dihydropyrimidine dehydrogenase (DPD), metalloenzyme, an adjunct anti-cancer drug target, contains highly specialized 4 × Fe²⁺₄S²⁻₄ clusters per chain. These clusters facilitate the catalysis of the rate-limiting step in the pyrimidine degradation pathway through a harmonized electron transfer cascade that triggers a redox catabolic reaction. In the process, the bulk of the administered 5-fluorouracil (5-FU) cancer drug is inactivated, while a small proportion is activated to nucleic acid antimetabolites. The occurrence of missense mutations in DPD protein within the general population, including those of African descent, has adverse toxicity effects due to altered 5-FU metabolism. Thus, deciphering mutation effects on protein structure and function is vital, especially for precision medicine purposes. We previously proposed combining molecular dynamics (MD) and dynamic residue network (DRN) analysis to decipher the molecular mechanisms of missense mutations in other proteins. However, the presence of Fe²⁺₄S²⁻₄ clusters in DPD poses a challenge for such in silico studies. The existing AMBER force field parameters cannot accurately describe the Fe²⁺ center coordination exhibited by this enzyme. Therefore, this study aimed to derive AMBER force field parameters for DPD enzyme Fe²⁺ centers, using the original Seminario method and the collation features Visual Force Field Derivation Toolkit as a supportive approach. All-atom MD simulations were performed to validate the results. Both approaches generated similar force field parameters, which accurately described the human DPD protein Fe²⁺₄S²⁻₄ cluster architecture. This information is crucial and opens new avenues for in silico cancer pharmacogenomics and drug discovery related research on 5-FU drug efficacy and toxicity issues.

Preferential Binding of Lanthanides to Methanol Dehydrogenase Evaluated with Density Functional Theory

Methanol dehydrogenase (MDH) is an enzyme used by certain bacteria for the oxidation of methanol to formaldehyde, which is a necessary metabolic reaction. The discovery of a lanthanide-dependent MDH reveals that lanthanide ions (Ln³⁺) have a role in biology. Two types of MDH exist in methane-utilizing bacteria: one that is Ca²⁺-dependent (MxaF) and another that is Ln³⁺-dependent. Given that the triply charged Ln³⁺ are strongly hydrated, it is not clear how preference for Ln³⁺ is manifested and if the Ca²⁺-dependent MxaF protein can also bind Ln³⁺ ions. A computational approach was used to estimate the Gibbs energy differences between the binding of Ln³⁺ and Ca²⁺ to MDH using density functional theory. The results show that both proteins bind La³⁺ with higher affinity than Ca²⁺, albeit with a more pronounced difference in the case of Ln³⁺-dependent MDH. Interestingly, the binding of heavier lanthanides is preferred over the binding of La³⁺, with Gd³⁺ showing the highest affinity for both proteins of all Ln³⁺ ions that were tested (La³⁺, Sm³⁺, Gd³⁺, Dy³⁺, and Lu³⁺). Energy decomposition analysis reveals that the higher affinity of La³⁺ than Ca²⁺ to MDH is due to stronger contributions of electrostatics and polarization, which overcome the high cost of desolvating the ion.

Making or Breaking Metal-Dependent Catalytic Activity: The Role of Stammers in Designed Three-Stranded Coiled Coils

While many life-critical reactions would be infeasibly slow without metal cofactors, a detailed understanding of how protein structure can influence catalytic activity remains elusive. Using de novo designed three-stranded coiled coils (TRI and Grand peptides formed using a heptad repeat approach), we examine how the insertion of a three residue discontinuity, known as a stammer insert, directly adjacent to a (His)3 metal binding site alters catalytic activity. The stammer, which locally alters the twist of the helix, significantly increases copper-catalyzed nitrite reductase activity (CuNiR). In contrast, the well-established zinc-catalyzed carbonic anhydrase activity (p-nitrophenyl acetate, pNPA) is effectively ablated. This study illustrates how the perturbation of the protein sequence using non-coordinating and non-acid base residues in the helical core can perturb metalloenzyme activity through the simple expedient of modifying the helical pitch adjacent to the catalytic center.

Theoretical characterization of Al(III) binding to KSPVPKSPVEEKG: Insights into the propensity of aluminum to interact with key sequences for neurofilament formation

Classical molecular dynamic simulations and density functional theory are used to unveil the interaction of aluminum with various phosphorylated derivatives of the fragment KSPVPKSPVEEKG (NF13), a major multiphosphorylation domain of human neurofilament medium (NFM). Our calculations reveal the rich coordination chemistry of the resultant structures with a clear tendency of aluminum to form multidentate structures, acting as a bridging agent between different sidechains and altering the local secondary structure around the binding site. Our evaluation of binding energies allows us to determine that phosphorylation has an increase in the affinity of these peptides towards aluminum, although the interaction is not as strong as well-known chelators of aluminum in biological systems. Finally, the presence of hydroxides in the first solvation layer has a clear damping effect on the binding affinities. Our results help in elucidating the potential structures than can be formed between this exogenous neurotoxic metal and key sequences for the formation of neurofilament tangles, which are behind of some of the most important degenerative diseases.

Metal ion coordination delays amyloid-β peptide self-assembly by forming an aggregation-inert complex

A detailed understanding of the molecular pathways for amyloid-β (Aβ) peptide aggregation from monomers into amyloid fibrils, a hallmark of Alzheimer's disease, is crucial for the development of diagnostic and therapeutic strategies. We investigate the molecular details of peptide fibrillization in vitro by perturbing this process through addition of differently charged metal ions. Here, we used a monovalent probe, the silver ion, that, similarly to divalent metal ions, binds to monomeric Aβ peptide and efficiently modulates Aβ fibrillization. On the basis of our findings, combined with our previous results on divalent zinc ions, we propose a model that links the microscopic metal-ion binding to Aβ monomers to its macroscopic impact on the peptide self-assembly observed in bulk experiments. We found that substoichiometric concentrations of the investigated metal ions bind specifically to the N-terminal region of Aβ, forming a dynamic, partially compact complex. The metal-ion bound state appears to be incapable of aggregation, effectively reducing the available monomeric Aβ pool for incorporation into fibrils. This is especially reflected in a decreased fibril-end elongation rate. However, because the bound state is significantly less stable than the amyloid state, Aβ peptides are only transiently redirected from fibril formation, and eventually almost all Aβ monomers are integrated into fibrils. Taken together, these findings unravel the mechanistic consequences of delaying Aβ aggregation via weak metal-ion binding, quantitatively linking the contributions of specific interactions of metal ions with monomeric Aβ to their effects on bulk aggregation.

How the Local Environment of Functional Sites Regulates Protein Function

Proteins form complex biological machineries whose functions in the cell are highly regulated at both the cellular and molecular levels. Cellular regulation of protein functions involves differential gene expressions, post-translation modifications, and signaling cascades. Molecular regulation, on the other hand, involves tuning an optimal local protein environment for the functional site. Precisely how a protein achieves such an optimal environment around a given functional site is not well understood. Herein, by surveying the literature, we first summarize the various reported strategies used by certain proteins to ensure their correct functioning. We then formulate three key physicochemical factors for regulating a protein's functional site, namely, (i) its immediate interactions, (ii) its solvent accessibility, and (iii) its conformational flexibility. We illustrate how these factors are applied to regulate the functions of free/metal-bound Cys and Zn sites in proteins.

Selective Phosphate Removal from Water and Wastewater using Sorption: Process Fundamentals and Removal Mechanisms

Eutrophication of water bodies is a serious and widespread environmental problem. Achieving low levels of phosphate concentration to prevent eutrophication is one of the important goals of the wastewater engineering and surface water management. Meeting the increasingly stringent standards is feasible in using a phosphate-selective sorption system. This critical review discusses the most fundamental aspects of selective phosphate removal processes and highlights gains from the latest developments of phosphate-selective sorbents. Selective sorption of phosphate over other competing anions can be achieved based on their differences in acid-base properties, geometric shapes, and metal complexing abilities. Correspondingly, interaction mechanisms between the phosphate and sorbent are categorized as hydrogen bonding, shape complementarity, and inner-sphere complexation, and their representative sorbents are organic-functionalized materials, molecularly imprinted polymers, and metal-based materials, respectively. Dominating factors affecting the phosphate sorption performance of these sorbents are critically examined, along with a discussion of some overlooked facts regarding the development of high-performance sorbents for selective phosphate removal from water and wastewater.

Single molecule observation of hard-soft-acid-base (HSAB) interaction in engineered Mycobacterium smegmatis porin A (MspA) nanopores

In the formation of coordination interactions between metal ions and amino acids in natural metalloproteins, the bound metal ion is critical either for the stabilization of the protein structure or as an enzyme co-factor. Though extremely small in size, metal ions, when bound to the restricted environment of an engineered biological nanopore, result in detectable perturbations during single channel recordings. All reported work of this kind was performed with engineered α-hemolysin nanopores and the observed events appear to be extremely small in amplitude (∼1–3 pA). We speculate that the cylindrical pore restriction of α-hemolysin may not be optimal for probing extremely small analytes. Mycobacterium smegmatis porin A (MspA), a conical shaped nanopore, was engineered to interact with Ca²⁺, Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ and a systematically larger event amplitude (up to 10 pA) was observed. The measured rate constant suggests that the coordination of a single ion with an amino acid follows hard–soft-acid–base theory, which has never been systematically validated in the case of a single molecule. By adjusting the measurement pH from 6.8 to 8.0, the duration of a single ion binding event could be modified with a ∼46-fold time extension. The phenomena reported suggest MspA to be a superior engineering template for probing a variety of extremely small analytes, such as monatomic and polyatomic ions, small molecules or chemical intermediates, and the principle of hard–soft-acid–base interaction may be instructive in the pore design.

The principle of hard–soft-acid–base (HSAB) theory was first validated in single molecule by measurements with engineered Mycobacterium smegmatis porin A (MspA) nanopore reactors.

Structure and Metal Binding Properties of Chlamydia trachomatis YtgA

The obligate intracellular pathogen Chlamydia trachomatis is a globally significant cause of sexually transmitted bacterial infections and the leading etiological agent of preventable blindness. The first-row transition metal iron (Fe) plays critical roles in chlamydial cell biology, and acquisition of this nutrient is essential for the survival and virulence of the pathogen. Nevertheless, how C. trachomatis acquires Fe from host cells is not well understood, since it lacks genes encoding known siderophore biosynthetic pathways, receptors for host Fe storage proteins, and the Fe acquisition machinery common to many bacteria. Recent studies have suggested that C. trachomatis directly acquires host Fe via the ATP-binding cassette permease YtgABCD. Here, we characterized YtgA, the periplasmic solute binding protein component of the transport pathway, which has been implicated in scavenging Fe(III) ions. The structure of Fe(III)-bound YtgA was determined at 2.0-Å resolution with the bound ion coordinated via a novel geometry (3 Ns, 2 Os [3N2O]). This unusual coordination suggested a highly plastic metal binding site in YtgA capable of interacting with other cations. Biochemical analyses showed that the metal binding site of YtgA was not restricted to interaction with only Fe(III) ions but could bind all transition metal ions examined. However, only Mn(II), Fe(II), and Ni(II) ions bound reversibly to YtgA, with Fe being the most abundant cellular transition metal in C. trachomatis Collectively, these findings show that YtgA is the metal-recruiting component of the YtgABCD permease and is most likely involved in the acquisition of Fe(II) and Mn(II) from host cells.IMPORTANCE Chlamydia trachomatis is the most common bacterial sexually transmitted infection in developed countries, with an estimated global prevalence of 4.2% in the 15- to 49-year age group. Although infection is asymptomatic in more than 80% of infected women, about 10% of cases result in serious disease. Infection by C. trachomatis is dependent on the ability to acquire essential nutrients, such as the transition metal iron, from host cells. In this study, we show that iron is the most abundant transition metal in C. trachomatis and report the structural and biochemical properties of the iron-recruiting protein YtgA. Knowledge of the high-resolution structure of YtgA will provide a platform for future structure-based antimicrobial design approaches.

A unique ferrous iron binding mode is associated with large conformational changes for the transport protein FpvC of Pseudomonas aeruginosa

Pseudomonas aeruginosa secretes pyoverdine, a major siderophore to get access to iron, an essential nutrient. Pyoverdine scavenges ferric iron in the bacterial environment with the resulting complex internalized by bacteria. Releasing of iron from pyoverdine in the periplasm involves an iron reduction by an inner membrane reductase and two solute-binding proteins (SBPs) FpvC and FpvF in association with their ABC transporter. FpvC and FpvF belong to two different subgroups of SBPs within the structural cluster A: FpvC and FpvF were proposed to be a metal-binding protein and a ferrisiderophore-binding protein respectively. Here, we report the redox state and the binding mode of iron to FpvC. We first solved the crystal structure of FpvC bound to a fortuitous Ni²⁺ by single anomalous dispersion method. Using a different protein purification strategy, we determined the structure of FpvC with manganese and iron, which binds to FpvC in a ferrous state as demonstrated by electron paramagnetic resonance. FpvC is the first example of a hexahistidine metal site among SBPs in which the Fe²⁺ redox state is stabilized under aerobic conditions. Using biophysics methods, we showed that FpvC reversibly bind to a broad range of divalent ions. The structure of a mutant mimicking the apo FpvC reveals a protein in an open state with large conformational changes when compared with the metal-bound FpvC. These results highlight that the canonical metal site in FpvC is distinct from those yet described in SBPs and they provide new insights into the mechanism of PVD-Fe dissociation in P. aeruginosa.

Recent Progress in Metal-Organic Framework (MOF) Based Luminescent Chemodosimeters

Metal-organic frameworks (MOFs), as a class of crystalline hybrid architectures, consist of metal ions and organic ligands and have displayed great potential in luminescent sensing applications due to their tunable structures and unique photophysical properties. Until now, many studies have been reported on the development of MOF-based luminescent sensors, which can be classified into two major categories: MOF chemosensors based on reversible host-guest interactions and MOF chemodosimeters based on the irreversible reactions between targets with a probe. In this review, we summarize the recently developed luminescent MOF-based chemodosimeters for various analytes, including H2S, HClO, biothiols, fluoride ions, redox-active biomolecules, Hg2+, and CN-. In addition, some remaining challenges and future perspectives in this area are also discussed.

Healing through Histidine: Bioinspired Pathways to Self-Healing Polymers via Imidazole⁻Metal Coordination

Biology offers a valuable inspiration toward the development of self-healing engineering composites and polymers. In particular, chemical level design principles extracted from proteinaceous biopolymers, especially the mussel byssus, provide inspiration for design of autonomous and intrinsic healing in synthetic polymers. The mussel byssus is an acellular tissue comprised of extremely tough protein-based fibers, produced by mussels to secure attachment on rocky surfaces. Threads exhibit self-healing response following an apparent plastic yield event, recovering initial material properties in a time-dependent fashion. Recent biochemical analysis of the structure-function relationships defining this response reveal a key role of sacrificial cross-links based on metal coordination bonds between Zn2+ ions and histidine amino acid residues. Inspired by this example, many research groups have developed self-healing polymeric materials based on histidine (imidazole)-metal chemistry. In this review, we provide a detailed overview of the current understanding of the self-healing mechanism in byssal threads, and an overview of the current state of the art in histidine- and imidazole-based synthetic polymers.