Electrospun Gelatin/β-TCP Composite Nanofibers Enhance Osteogenic Differentiation of BMSCs and In Vivo Bone Formation by Activating Ca (2+) -Sensing Receptor Signaling

An in vitro bioinspired approach to enhance the bioactivity of titanium implants via electrophoretic deposition and biomimetic mineralization of type i collagen

OBJECTIVE

This study aims to explore the efficacy of Electrophoretic Deposition (EPD) for collagen type I coating on titanium implants and its subsequent mineralization to improve osseointegration and bone regeneration.

METHODS

Titanium disks were prepared with a sandblasted, large grit and acid-etched (SLA) surface. EPD was employed to deposit collagen type I onto the titanium surfaces, followed by two modes of mineralization: extra-fibril mineralization (EFM) and inter-fibril mineralization (IFM). Then comprehensive in vitro studies were conducted including surface properties, cell proliferation, osteogenic differentiation, and inflammatory responses.

RESULTS

EPD successfully deposited a uniform collagen layer on titanium surfaces. EFM resulted in deposition of larger, irregularly shaped crystals, while IFM produced controlled, helical fibril mineralization. IFM-treated surfaces exhibited enhanced cell viability, proliferation, and osteogenic differentiation. Both EFM and IFM surfaces triggered higher macrophage activation than SLA surfaces. While EFM primarily induced a stronger M1 pro-inflammatory response, IFM exhibited a more balanced macrophage polarization with upregulated M2 markers at later stages.

CONCLUSION

EPD, particularly when integrated with IFM, significantly enhances the bioactivity and osteogenic potential of collagen-coated titanium implants. This method surpasses traditional SLA surfaces by stabilizing the collagen layer and creating a biomimetic environment conducive to bone regeneration and healing through a balanced inflammatory response, offering a promising strategy to improve titanium implant performance.

Evaluation of Polymeric Micro/Nanofibrous Hybrid Scaffolds Prepared via Centrifugal Nozzleless Spinning for Tissue Engineering Applications

We compared the applicability of 3D fibrous scaffolds, produced by our patented centrifugal spinning technology, in soft tissue engineering. The scaffolds were prepared from four different biocompatible and biodegradable thermoplastics, namely, polylactide (PLA), polycaprolactone (PCL), poly(3-hydroxybutyrate) (PHB), and poly(1,4-butylene succinate) (PBS) and their blends. The combined results of SEM and BET analyses revealed an internal hierarchically organized porosity of the polymeric micro/nanofibers. Both nanoporosity and capillary effect are crucial for the water retention capacity of scaffolds designed for tissue engineering. The increased surface area provided by nanoporosity enhances water retention, while the capillary effect facilitates the movement of water and nutrients within the scaffolds. When the scaffolds were seeded with adipose-derived stem cells (ASCs), the ingrowth of these cells was the deepest in the PLA/PCL 13.5/4 (w/w) composite scaffolds. This result is consistent with the relatively large pore size in the fibrous networks, the high internal porosity, and the large specific surface area found in these scaffolds, which may therefore be best suited as a component of adipose tissue substitutes that could reduce postoperative tissue atrophy. Adipose tissue constructs produced in this way could be used in the future instead of conventional fat grafts, for example, in breast reconstruction following cancer ablation.

Recent Strategies and Advances in Hydrogel-Based Delivery Platforms for Bone Regeneration

Bioactive molecules have shown great promise for effectively regulating various bone formation processes, rendering them attractive therapeutics for bone regeneration. However, the widespread application of bioactive molecules is limited by their low accumulation and short half-lives in vivo. Hydrogels have emerged as ideal carriers to address these challenges, offering the potential to prolong retention times at lesion sites, extend half-lives in vivo and mitigate side effects, avoid burst release, and promote adsorption under physiological conditions. This review systematically summarizes the recent advances in the development of bioactive molecule-loaded hydrogels for bone regeneration, encompassing applications in cranial defect repair, femoral defect repair, periodontal bone regeneration, and bone regeneration with underlying diseases. Additionally, this review discusses the current strategies aimed at improving the release profiles of bioactive molecules through stimuli-responsive delivery, carrier-assisted delivery, and sequential delivery. Finally, this review elucidates the existing challenges and future directions of hydrogel encapsulated bioactive molecules in the field of bone regeneration.

Combining three-dimensionality and CaP glass-PLA composites: Towards an efficient vascularization in bone tissue healing

Bone regeneration often fails due to implants/grafts lacking vascular supply, causing necrotic tissue and poor integration. Microsurgical techniques are used to overcome this issue, allowing the graft to anastomose. These techniques have limitations, including severe patient morbidity and current research focuses on stimulating angiogenesis in situ using growth factors, presenting limitations, such as a lack of control and increased costs. Non-biological stimuli are necessary to promote angiogenesis for successful bone constructs. Recent studies have reported that bioactive glass dissolution products, such as calcium-releasing nanoparticles, stimulate hMSCs to promote angiogenesis and new vasculature. Moreover, the effect of 3D microporosity has also been reported to be important for vascularisation in vivo. Therefore, we used room-temperature extrusion 3D printing with polylactic acid (PLA) and calcium phosphate (CaP) based glass scaffolds, focusing on geometry and solvent displacement for scaffold recovery. Combining both methods enabled reproducible control of 3D structure, porosity, and surface topography. Scaffolds maintained calcium ion release at physiological levels and supported human mesenchymal stem cell proliferation. Scaffolds stimulated the secretion of vascular endothelial growth factor (VEGF) after 3 days of culture. Subcutaneous implantation in vivo indicated good scaffold integration and blood vessel infiltration as early as one week after. PLA-CaP scaffolds showed increased vessel maturation 4 weeks after implantation without vascular regression. Results show PLA/CaP-based glass scaffolds, made via controlled 3D printing, support angiogenesis and vessel maturation, promising improved vascularization for bone regeneration.

Fabrication and characterization of a bioactive composite scaffold based on polymeric collagen/gelatin/nano β-TCP for alveolar bone regeneration

One strategy to correct alveolar bone defects is use of bioactive bone substitutes to maintain the structure of defect site and facilitate cells and vessels' ingrowth. This study aimed to fabricate and characterize the freeze-dried bone regeneration scaffolds composed of polymeric Type I collagen, nano Beta-tricalcium phosphate (β-TCP), and gelatin. The stable structures of scaffolds were obtained by thermal crosslinking and EDC/NHS ((1-ethyl-3-(3-dimethylaminopropyl) carbodiimide)/(N-hydroxysuccinimide)) chemical crosslinking processes. Subsequently, the physicochemical and biological properties of the scaffolds were characterized and assessed. The results indicated the bioactive composite scaffolds containing 10% and 20% (w/v) nano β-TCP exhibited suitable porosity (84.45 ± 25.43 nm, and 94.51 ± 14.69 nm respectively), a rapid swelling property (reaching the maximum swelling rate at 1 h), excellent degradation resistance (residual mass percentage of scaffolds higher than 80% on day 90 in PBS and Type I collagenase solution respectively), and sustained calcium release capabilities. Moreover, they displayed outstanding biological properties, including superior cell viability, cell adhesion, and cell proliferation. Additionally, the scaffolds containing 10% and 20% (w/v) nano β-TCP could promote the osteogenic differentiation of MC3T3-E1. Therefore, the bioactive composite scaffolds containing 10% and 20% (w/v) nano β-TCP could be further studied for being used to treat alveolar bone defects in vivo.

Effects of l-Tryptophan and 1,25-Dihydroxycholecalciferol on Proliferation and Osteogenic Differentiation of Mesenchymal Stem Cells Isolated from the Compact Bones of Broilers and Layers

Poultry is vulnerable to bone problems throughout their lives or production period due to rapid growth in broilers and the active laying cycle in layers. The calcium-sensing receptor (CaSR) is important in calcium and bone metabolism. The objective of this study was to investigate the effect of the CaSR ligand (l-Trp) and 1,25-dihydroxycholecalciferol (1,25OHD₃) on the regulation of proliferation and osteogenic differentiation of chicken mesenchymal stem cells (MSCs) isolated from the compact bones of 14-day-old Ross 308 chickens and Dekalb pullets, which can provide cell-based evidence for the prevention or alleviation of skeletal disorders in the poultry industry. First, the dose- (0, 0.5, 1, 2, 5, 10, and 15 mM) and time-effects (0, 7, and 14 days) of l-Trp on the proliferation and osteogenic differentiation in chicken MSCs were investigated. The 5 mM l-Trp had a balanced effect between proliferation and osteogenic differentiation in broiler and layer MSCs when differentiated for 7 days. The broiler and layer MSCs were then treated with (1) osteogenic medium, osteogenic medium supplemented with (2) 1 nM 1,25OHD₃, (3) 2.5 mM Ca²⁺, (4) 2.5 mM Ca²⁺ + 5 mM l-Trp and (5) 2.5 mM Ca²⁺ + 5 mM l-Trp + 1 μM NPS-2143, separately for 7 days. Results showed that the 5 mM l-Trp significantly inhibited the proliferation of broiler and layer MSCs on day 7 (P < 0.05), but 1 nM 1,25OHD₃ significantly promoted the proliferation of layer MSCs (P < 0.05). Only the 2.5 mM Ca²⁺ + 5 mM l-Trp group significantly increased the mineralization process during osteogenic differentiation (P < 0.05), and this treatment also significantly upregulated the mRNA expression of the vitamin D receptor (VDR), β-catenin, and osteogenesis genes in broiler MSCs (P < 0.05). The osteogenic differentiation process in layer MSCs was faster than that in broiler MSCs. In layer MSCs, Ca²⁺ alone significantly facilitated mineralization and ALP activity after 7-day osteogenic differentiation (P < 0.05). However, the 5 mM l-Trp significantly inhibited the differentiation and mineralization process by downregulating the mRNA expression of CaSR, VDR, β-catenin, and osteogenic genes (P < 0.05) in layer MSCs. Taken together, l-Trp and 1,25OHD₃ can regulate proliferation and osteogenic differentiation in both broiler and layer MSCs depending on the dose, treatment time, and cell proliferation and differentiation stages.

Effects of integrated bioceramic and uniaxial drawing on mechanically-enhanced fibrogenesis for bionic periosteum engineering

Periosteum is clinically required for the management of large bone defects. Attempts to exploit the periosteum's participation in bone healing, however, have rarely featured biological and mechanical complexity for the scaffolds relevant to translational medicine. In this regard, we report engineering of bioinspired periosteum with co-delivery of ionic and geometry cues. The scaffold demonstrated microsheet-like fibre morphology and was developed based on bioresorbable poly(-caprolactone) and bioactive copper-doped tricalcium phosphate (Cu-TCP). A coordinated interaction was found between the effects of Cu-TCP addition and uniaxial drawing, leading to tunable fibrogenesis for different fibre morphologies, organisation, and surface wettability. The coordination resulted in significant enhancements in Young's Modulus, yield stress and ultimate stress along fibrous alignment, without causing reductions across fibres. This demonstrated mechanical anisotropy of the scaffold similar to natural periosteum, and seeding with mouse calvarial preosteoblasts, the scaffold supported cell alignment with deposition of CaP-like nodules and extracellular matrix. This work provides new insights on periosteum engineering with osteo-related composite fibres. The artificial periosteum can be used in clinical settings to facilitate repair of large bone defects.

The advances in nanomedicine for bone and cartilage repair

With the gradual demographic shift toward an aging and obese society, an increasing number of patients are suffering from bone and cartilage injuries. However, conventional therapies are hindered by the defects of materials, failing to adequately stimulate the necessary cellular response to promote sufficient cartilage regeneration, bone remodeling and osseointegration. In recent years, the rapid development of nanomedicine has initiated a revolution in orthopedics, especially in tissue engineering and regenerative medicine, due to their capacity to effectively stimulate cellular responses on a nanoscale with enhanced drug loading efficiency, targeted capability, increased mechanical properties and improved uptake rate, resulting in an improved therapeutic effect. Therefore, a comprehensive review of advancements in nanomedicine for bone and cartilage diseases is timely and beneficial. This review firstly summarized the wide range of existing nanotechnology applications in the medical field. The progressive development of nano delivery systems in nanomedicine, including nanoparticles and biomimetic techniques, which are lacking in the current literature, is further described. More importantly, we also highlighted the research advancements of nanomedicine in bone and cartilage repair using the latest preclinical and clinical examples, and further discussed the research directions of nano-therapies in future clinical practice.

Fibrous Polymer-Based Composites Obtained by Electrospinning for Bone Tissue Engineering

Currently, the significantly developing fields of tissue engineering related to the fabrication of polymer-based materials that possess microenvironments suitable to provide cell attachment and promote cell differentiation and proliferation involve various materials and approaches. Biomimicking approach in tissue engineering is aimed at the development of a highly biocompatible and bioactive material that would most accurately imitate the structural features of the native extracellular matrix consisting of specially arranged fibrous constructions. For this reason, the present research is devoted to the discussion of promising fibrous materials for bone tissue regeneration obtained by electrospinning techniques. In this brief review, we focus on the recently presented natural and synthetic polymers, as well as their combinations with each other and with bioactive inorganic incorporations in order to form composite electrospun scaffolds. The application of several electrospinning techniques in relation to a number of polymers is touched upon. Additionally, the efficiency of nanofibrous composite materials intended for use in bone tissue engineering is discussed based on biological activity and physiochemical characteristics.

The role of Ca2+ /Calcineurin/NFAT signalling pathway in osteoblastogenesis

The bone remodelling process is closely related to bone health. Osteoblasts and osteoclasts participate in the bone remodelling process under the regulation of various factors inside and outside. Excessive activation of osteoclasts or lack of function of osteoblasts will cause occurrence and development of multiple bone‐related diseases. Ca²⁺/Calcineurin/NFAT signalling pathway regulates the growth and development of many types of cells, such as cardiomyocyte differentiation, angiogenesis, chondrogenesis, myogenesis, bone development and regeneration, etc. Some evidences indicate that this signalling pathway plays an extremely important role in bone formation and bone pathophysiologic changes. This review discusses the role of Ca²⁺/Calcineurin/NFAT signalling pathway in the process of osteogenic differentiation, as well as the influence of regulating each component in this signalling pathway on the differentiation and function of osteoblasts, whereby the relationship between Ca²⁺/Calcineurin/NFAT signalling pathway and osteoblastogenesis could be deeper understood.

Effects of nanofibers on mesenchymal stem cells: environmental factors affecting cell adhesion and osteogenic differentiation and their mechanisms

Nanofibers can mimic natural tissue structure by creating a more suitable environment for cells to grow, prompting a wide application of nanofiber materials. In this review, we include relevant studies and characterize the effect of nanofibers on mesenchymal stem cells, as well as factors that affect cell adhesion and osteogenic differentiation. We hypothesize that the process of bone regeneration in vitro is similar to bone formation and healing in vivo, and the closer nanofibers or nanofibrous scaffolds are to natural bone tissue, the better the bone regeneration process will be. In general, cells cultured on nanofibers have a similar gene expression pattern and osteogenic behavior as cells induced by osteogenic supplements in vitro. Genes involved in cell adhesion (focal adhesion kinase (FAK)), cytoskeletal organization, and osteogenic pathways (transforming growth factor-β (TGF-β)/bone morphogenic protein (BMP), mitogen-activated protein kinase (MAPK), and Wnt) are upregulated successively. Cell adhesion and osteogenesis may be influenced by several factors. Nanofibers possess certain physical properties including favorable hydrophilicity, porosity, and swelling properties that promote cell adhesion and growth. Moreover, nanofiber stiffness plays a vital role in cell fate, as cell recruitment for osteogenesis tends to be better on stiffer scaffolds, with associated signaling pathways of integrin and Yes-associated protein (YAP)/transcriptional co-activator with PDZ-binding motif (TAZ). Also, hierarchically aligned nanofibers, as well as their combination with functional additives (growth factors, HA particles, etc.), contribute to osteogenesis and bone regeneration. In summary, previous studies have indicated that upon sensing the stiffness of the nanofibrous environment as well as its other characteristics, stem cells change their shape and tension accordingly, regulating downstream pathways followed by adhesion to nanofibers to contribute to osteogenesis. However, additional experiments are needed to identify major signaling pathways in the bone regeneration process, and also to fully investigate its supportive role in fabricating or designing the optimum tissue-mimicking nanofibrous scaffolds.

Metformin-Incorporated Gelatin/Hydroxyapatite Nanofiber Scaffold for Bone Regeneration

Tissue engineering and regenerative medicine has gradually evolved as a promising therapeutic strategy to the modern health care of aging and diseased population. In this study, we developed a novel nanofibrous scaffold and verified its application in the critical bone defect regeneration. The metformin-incorporated nano-gelatin/hydroxyapatite fibers (NGF) was produced by electrospinning, cross-linked, and then characterized by X-ray powder diffractometer and Fourier-transform infrared spectroscopy. Cytotoxicity, cell adhesion, cell differentiation, and quantitative osteogenic gene and protein expression were analyzed by bone marrow stem cells (BMSCs) from rat. Rat forearm critical bone defect model was performed for the in vivo study. The NGF were characterized by their porous structures with proper interconnectivity without significant cytotoxic effects; the adhesion of BMSCs on the NGF could be enhanced. The osteogenic gene and protein expression were upregulated. Postimplantation, the new regenerated bone in bone defect was well demonstrated in the NGF samples. We demonstrated that the metformin-incorporated NGF greatly improved healing potential on the critical-size bone defect. Although metformin-incorporated NGF had advantageous effectiveness during bone regeneration, further validation is required before it can be applied to clinical applications. Impact statement Bone is the structure that supports the rest of the human body. Critical-size bone defect hinders the regeneration of damaged bone tissues and compromises the mechanical strength of the skeletal system. Characterized by their porous structures with proper interconnectivity, the electrospinning nano-gelatin/hydroxyapatite fibrous scaffold developed in this study can greatly improve the healing potential on the critical-size bone defect. Further validation can validate its potential clinical applications.

Cell Scaffolds for Bone Tissue Engineering

Currently, well-known surgical procedures for bone defects are classified into four types: (1) autogenous bone graft transplantation, (2) allogeneic bone graft transplantation, (3) xenogeneic bone graft transplantation, and (4) artificial bone graft transplantation. However, they are often risky procedures and related to postoperative complications. As an alternative, tissue engineering to regenerate new bone often involves the use of mesenchymal stem cells (MSCs), derived from bone marrow, adipose tissues, and so on, which are cultured into three-dimensional (3D) scaffolds to regenerate bone tissue by osteoinductive signaling. In this manuscript, we provide an overview of recent treatment of bone defects and the studies on the creation of cell scaffolds for bone regeneration. Bone regeneration from bone marrow-derived mesenchymal stem cells using silica nonwoven fabric by the authors' group were provided. Potential application and future direction of the present systems were also described.

A Novel Cytocompatibility Strengthening Strategy of Ultrafine-Grained Pure Titanium

Ultrafine-grained pure (UFG) titanium processed by equal channel angular pressing possesses mechanical properties comparable to those of Ti-6Al-4V and features more favorable friction resistance, biocompatibility, and corrosion resistance than does commercially pure (CP) titanium. Nevertheless, UFG titanium is still a bio-inert material with a lack of bone-inducing ability. Here, TiO₂-hydroxyapatite (TiO₂-HA) coatings were fabricated on CP titanium and UFG titanium through combining micro-arc oxidation and hydrothermal treatment together to improve their cytocompatibility. The results indicate that, compared with conventional coatings that use CP titanium as the substrate, such coatings formed on the UFG titanium possess additional hydrophilicity and in vitro cytocompatibility. The fantastic hierarchical structure of the UFG TiO₂-HA coating (UG-MH coating), including microscale and nanoscale pores and short column-shaped and sheet-shaped HA grains with varying geometric shapes, excellent hydrophilicity, and high polar force, enhances the mutual effects between the osteoblasts and titanium implant since it provides an adequate microenvironment for the ingrowth of osteoblasts, inducing osteoblast adhesion, proliferation, and differentiation. The UG-MH coating has a synergistic effect due to its fantastic hydrophilic hierarchical structure and high polar force on the up-regulated expression of cytoskeletal actin proteins as well as osteocalcin, protein kinase C (PKC), nuclear factor of activated T-cells (NFAT), and Wnt5, enabling osteoblasts to differentiate via the Wnt calcium-dependent signaling pathway. This study highlights the idea that the modified UFG titanium will be more suitable than CP titanium in dental and orthopedic applications.

Advancements and frontiers in nano-based 3D and 4D scaffolds for bone and cartilage tissue engineering

Given the enormous increase in the risks of bone and cartilage defects with the rise in the aging population, the current treatments available are insufficient for handling this burden, and the supply of donor organs for transplantation is limited. Therefore, tissue engineering is a promising approach for treating such defects. Advances in materials research and high-tech optimized fabrication of scaffolds have increased the efficiency of tissue engineering. Electrospun nanofibrous scaffolds and hydrogel scaffolds mimic the native extracellular matrix of bone, providing a support for bone and cartilage tissue engineering by increasing cell viability, adhesion, propagation, and homing, and osteogenic isolation and differentiation, vascularization, host integration, and load bearing. The use of these scaffolds with advanced three- and four-dimensional printing technologies has enabled customized bone grafting. In this review, we discuss the different approaches used for cartilage and bone tissue engineering.

Effect of different concentration of demineralized bone powder with gellan gum porous scaffold for the application of bone tissue regeneration

The prevalence of bone-related diseases has increased, the population growth as a result of the aging phenomenon requires more effective treatments for regeneration of bone defect. Although an autogenous bone graft was used in traditional operation method, they are very inefficient in current bone defect surgery and very difficult to gather the required amount of bone for operation. It is becoming a gradually growing disease, hence there is a need for developing a new method for preparing biomimetic scaffolds. DBP (demineralized bone powder), a potent bone regeneration material, has a trace amount of ions and bone mineral component. Especially, GD (Gallus gallus var domesticus) DBP has a unique property, which has melanin, for strengthening bones, increasing ALP activity and bone mineralization, compared to other available biomaterials. For that reason, GD DBP was combined with GG (gellan gum). The material was characterized in vitro and in vivo rat model. The first priority in this work was given to assessing the attachment and proliferation rates of BMSCs following the in vivo experiment in rats. The results of 1% sample showed better osteogenic effects that can be used in clinical application after studying in larger animals for better bone regeneration and tissue engineering.

Sinapic acid-loaded chitosan nanoparticles in polycaprolactone electrospun fibers for bone regeneration in vitro and in vivo

Sinapic acid (SA) is a plant-derived phenolic compound known for its multiple biological properties, but its role in the promotion of bone formation is not yet well-studied. Moreover, the delivery of SA is hindered by its complex hydrophobic nature, limiting its bioavailability. In this study, we fabricated a drug delivery system using chitosan nanoparticles (nCS) loaded with SA at different concentrations. These were incorporated into polycaprolactone (PCL) fibers via an electrospinning method. nCS loaded with 50 μM SA in PCL fibers promoted osteoblast differentiation. Furthermore, SA treatment activated the osteogenesis signaling pathways in mouse mesenchymal stem cells. A critical-sized rat calvarial bone defect model system identified that the inclusion of SA into PCL/nCS fibers accelerated bone formation. Collectively, these data suggest that SA promoted osteoblast differentiation in vitro and bone formation in vivo, possibly by activating the TGF-β1/BMP/Smads/Runx2 signaling pathways, suggesting SA might have therapeutic benefits in bone regeneration.

The Regenerative Applicability of Bioactive Glass and Beta-Tricalcium Phosphate in Bone Tissue Engineering: A Transformation Perspective

The conventional applicability of biomaterials in the field of bone tissue engineering takes into consideration several key parameters to achieve desired results for prospective translational use. Hence, several engineering strategies have been developed to model in the regenerative parameters of different forms of biomaterials, including bioactive glass and β-tricalcium phosphate. This review examines the different ways these two materials are transformed and assembled with other regenerative factors to improve their application for bone tissue engineering. We discuss the role of the engineering strategy used and the regenerative responses and mechanisms associated with them.

Promoting osteogenic differentiation of BMSCs via mineralization of polylactide/gelatin composite fibers in cell culture medium

Mineralization capability is an important issue in developing bone repairing biomaterials, while it is not quite clear how this feature would act in the presence of cells and influence cell osteogenic differentiation without adding extra osteoinductive factors such as β‑sodium glycerophosphate and dexamethasone. Poly(l‑lactide) (PLLA) and gelatin composite fibers (PG, 1:1 in weight) were electrospun, treated with CaCl₂ solution (PG-Ca), and used for mineralization studies by using cell culture media (αMEM, and αMEM + serum). Bone mesenchymal stromal cells (BMSCs) were then seeded and cultured on both PG and PG-Ca fibrous mats for 28 days by only using αMEM + serum. Interestingly, mineral depositions on both PG and PG-Ca fibers were detected in the environment of αMEM or αMEM + serum, in which, PG-Ca fibers demonstrated stronger ability in inducing hydroxyapatite formation than PG fibers, especially in the presence of fetal bovine serum. When BMSCs were cultured on the two kinds of fibrous mats, apatite depositions were still clearly detected, while the depositing amounts decreased in comparison with corresponding cell-free cases. It was ascribed to the consumption of ions by the continuously proliferating BMSCs, whose osteogenic differentiation was significantly promoted even without extra osteoinductive factors, especially on PG-Ca fibrous mats, in comparison with the control group. Therefore, it was confirmed the capability of scaffolding materials in enriching ions like calcium and phosphate around cells was an efficient way to promote bone regeneration.

Review of craniofacial regeneration in China

AIM

Tissue engineering has been recognised as one of the most effective means to form a new viable tissue for medical purpose. Tissue engineering involves a combination of scaffolds, cells, suitable biochemical and physicochemical factors, and engineering and materials methods. This review covered some biomedicine, such as biomaterials, bioactive factors, and stem cells, and manufacturing technologies used in tissue engineering in the oral maxillofacial region, especially in China.

MATERIALS AND METHODS

Data for this review were identified by searches of Web of Science and PubMed, and references from relevant articles using the search terms "biomaterials", "oral tissue regeneration", "bioactive factors" and "stem cells". Only articles published in English between 2013 and 2018 were included.

CONCLUSION

The combination of stem cells, bioactive factors and 3D scaffolds could be of far-reaching significance for the future therapies in tissue repair or tissue regeneration. Furthermore, the review also mentions issues that need to be solved in the application of these biomedicines.

Roles of electrical stimulation in promoting osteogenic differentiation of BMSCs on conductive fibers

The strategy of using conductive materials in regenerating bone defects is attractive, benefiting from the bioelectricity feature of natural bone tissues. Thereby, POP conductive fibers were fabricated by coating polypyrrole (PPY) onto electrospun poly(l-lactide) (PLLA) fibers, and their potentials in promoting osteogenic differentiation of bone mesenchymal stromal cells (BMSCs) were investigated. Different from the smooth-surfaced PLLA fibers, POP fibers were rough-surfaced and favorable for protein adsorption and mineralization nucleation. When electrical stimulation (ES) was applied, the surface charges on the conductive POP fibers further promoted the protein adsorption and the mineral deposition, while the non-conductive PLLA fibers displayed no such promotion. When BMSCs were cultured on these fibers, strong cell viability was detected, indicating their good biocompatibility and cell affinity. In osteogenic differentiation studies, BMSCs demonstrated the strongest ability in differentiating toward osteoblasts when they were cultured on the POP fibers under ES, followed by the case without ES. In comparison with the conductive POP fibers, the non-conductive PLLA fibers displayed significantly weaker ability in inducing the osteogenic differentiation of BMSCs with ES being applied or not. Alongside the differentiation, both the calcium deposition on BMSC/material complexes and the intracellular Ca²⁺ concentration were identified the most abundant when BMSCs grew on the POP fibers under ES. These findings suggested that the surface charges of conductive fibers played roles in regulating protein adsorption, ion migration and nucleation, particularly under ES, which contributed much to the increased intracellular Ca²⁺ ions, and thus accelerated the osteogenic differentiation of the seeded cells. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019.

Stimulation of calvarial bone healing with human bone marrow stromal cells versus inhibition with adipose-tissue stromal cells on nanostructured β-TCP-collagen

Bioactive functional scaffolds are essential for support of cell-based strategies to improve bone regeneration. Adipose-tissue-derived-stromal cells (ASC) are more accessible multipotent cells with faster proliferation than bone-marrow-derived-stromal-cells (BMSC) having potential to replace BMSC for therapeutic stimulation of bone-defect healing. Their osteogenic potential is, however, lower compared to BMSC, a deficit that may be overcome in growth factor-rich orthotopic bone defects with enhanced bone-conductive scaffolds. Objective of this study was to compare the therapeutic potency of human ASC and BMSC for bone regeneration on a novel nanoparticulate β-TCP/collagen-carrier (β-TNC). Cytotoxicity of β-TCP nanoparticles and multilineage differentiation of cells were characterized in vitro. Cell-seeded β-TNC versus cell-free controls were implanted into 4 mm calvarial bone-defects in immunodeficient mice and bone healing was quantified by µCT at 4 and 8 weeks. Tissue-quality and cell-origin were assessed by histology. β-TNC was non-toxic, radiolucent and biocompatible, lent excellent support for human cell persistence and allowed formation of human bone tissue by BMSC but not ASC. Opposite to BMSC, ASC-grafting significantly inhibited calvarial bone healing compared to controls. Bone formation progressed significantly from 4 to 8 weeks only in BMSC and controls yielding 5.6-fold more mineralized tissue in BMSC versus ASC-treated defects. Conclusively, β-TNC was simple to generate, biocompatible, osteoconductive, and stimulated osteogenicity of BMSC to enhance calvarial defect healing while ASC had negative effects. Thus, an orthotopic environment and β-TNC could not compensate for cell-autonomous deficits of ASC which should systematically be considered when choosing the right cell source for tissue engineering-based stimulation of bone regeneration.

STATEMENT OF SIGNIFICANCE

Bone-marrow-derived-stromal cells (BMSC) implanted on bone replacement materials can support bone defect healing and adipose-tissue-derived-stromal cells (ASC) being more accessible and better proliferating are considered as alternate source. This first standardized comparison of the bone regeneration potency of human ASC and BMSC was performed on a novel nanoparticular β-TCP-enriched collagen-carrier (β-TNC) designed to overcome the known inferior osteogenicity of ASC. β-TNC was non-toxic, biocompatible and osteoconductive supporting human bone formation and defect-closure by BMSC but not ASC. Long-term cell-persistence and the distinct secretome of ASC appear as main reasons why ASC inhibited bone healing opposite to BMSC. Overall, ASC-grafting is at considerable risk of producing negative effects on bone-healing while no such risks are known for BMSC.

κ-Carrageenan Enhances the Biomineralization and Osteogenic Differentiation of Electrospun Polyhydroxybutyrate and Polyhydroxybutyrate Valerate Fibers

Novel electrospun materials for bone tissue engineering were obtained by blending biodegradable polyhydroxybutyrate (PHB) or polyhydroxybutyrate valerate (PHBV) with the anionic sulfated polysaccharide κ-carrageenan (κ-CG) in varying ratios. In both systems, the two components phase separated as shown by FTIR, DSC and TGA. According to the contact angle data, κ-CG was localized preferentially at the fiber surface in PHBV/κ-CG blends in contrast to PHB/κ-CG, where the biopolymer was mostly found within the fiber. In contrast to the neat polyester fibers, the blends led to the formation of much smaller apatite crystals (800 nm vs 7 μm). According to the MTT assay, NIH3T3 cells grew in higher density on the blend mats in comparison to neat polyester mats. The osteogenic differentiation potential of the fibers was determined by SaOS-2 cell culture for 2 weeks. Alizarin red-S staining suggested an improved mineralization on the blend fibers. Thus, PHBV/κ-CG fibers resulted in more pronounced bioactive and osteogenic properties, including fast apatite-forming ability and deposition of nanosized apatite crystals.

Fabrication of a three-dimensional β-tricalcium-phosphate/gelatin containing chitosan-based nanoparticles for sustained release of bone morphogenetic protein-2: Implication for bone tissue engineering

Fabrication of an ideal scaffold having proper composition, physical structure and able to have sustained release of growth factors still is challenging for bone tissue engineering. Current study aimed to design an appropriate three-dimensional (3-D) scaffold with suitable physical characteristics, including proper compressive strength, degradation rate, porosity, and able to sustained release of bone morphogenetic protein-2 (BMP2), for bone tissue engineering. A highly porous 3-D β-tricalcium phosphate (β-TCP) scaffolds, inside of which two perpendicular canals were created, was fabricated using foam-casting technique. Then, scaffolds were coated with gelatin layer. Next, BMP2-loaded chitosan (CS) nanoparticles were dispersed into collagen hydrogel and filled into the scaffold canals. Physical characteristics of fabricated constructs were evaluated. Moreover, the capability of given construct for bone regeneration has been evaluated in vitro in interaction with human buccal fat pad-derived stem cells (hBFPSCs). The results showed that gelatin-coated TCP scaffold with rhBMP2 delivery system not only could act as a mechanically and biologically compatible framework, but also act as an osteoinductive graft by sustained delivering of rhBMP2 in a therapeutic window for differentiation of hBFPSCs towards the osteoblast lineage. The proposed scaffold model can be suggested for delivering of cells and other growth factors such as vascular endothelial growth factor (VEGF), alone or in combination, for future investigations.

Current advances in electrospun gelatin-based scaffolds for tissue engineering applications

The development of biomimetic highly-porous scaffolds is essential for successful tissue engineering. Electrospun nanofibers are highly versatile platforms for a broad range of applications in different research areas. In the biomedical field, micro/nanoscale fibrous structures have gained great interest for wound dressings, drug delivery systems, soft and hard-tissue engineering scaffolds, enzyme immobilization, among other healthcare applications. In this mini-review, electrospun gelatin-based scaffolds for a variety of tissue engineering applications, such as bone, cartilage, skin, nerve, and ocular and vascular tissue engineering, are reviewed and discussed. Gelatin blends with natural or synthetic polymers exhibit physicochemical, biomechanical, and biocompatibility properties very attractive for scaffolding. Current advances and challenges on this research field are presented.

Biomimetic composite scaffolds containing bioceramics and collagen/gelatin for bone tissue engineering - A mini review

Bone is a natural composite material consisting of an organic phase (collagen) and a mineral phase (calcium phosphate, especially hydroxyapatite). The strength of bone is attributed to the apatite, while the collagen fibrils are responsible for the toughness and visco-elasticity. The challenge in bone tissue engineering is to develop such biomimetic composite scaffolds, having a balance between biological and biomechanical properties. This review summarizes the current state of the field by outlining composite scaffolds made of gelatin/collagen in combination with bioactive ceramics for bone tissue engineering application.

Biodegradable Materials for Bone Repair and Tissue Engineering Applications

This review discusses and summarizes the recent developments and advances in the use of biodegradable materials for bone repair purposes. The choice between using degradable and non-degradable devices for orthopedic and maxillofacial applications must be carefully weighed. Traditional biodegradable devices for osteosynthesis have been successful in low or mild load bearing applications. However, continuing research and recent developments in the field of material science has resulted in development of biomaterials with improved strength and mechanical properties. For this purpose, biodegradable materials, including polymers, ceramics and magnesium alloys have attracted much attention for osteologic repair and applications. The next generation of biodegradable materials would benefit from recent knowledge gained regarding cell material interactions, with better control of interfacing between the material and the surrounding bone tissue. The next generations of biodegradable materials for bone repair and regeneration applications require better control of interfacing between the material and the surrounding bone tissue. Also, the mechanical properties and degradation/resorption profiles of these materials require further improvement to broaden their use and achieve better clinical results.