Molecular photoacoustic imaging of follicular thyroid carcinoma

Activity-Based Photoacoustic Probes for Detection of Disease Biomarkers beyond Oncology

The earliest activity-based photoacoustic (PA) probes were developed as diagnostic agents for cancer. Since this seminal work over a decade ago that specifically targeted matrix metalloproteinase-2, PA instrumentation, dye platforms, and probe designs have advanced considerably, allowing for the detection of an impressive list of cancer types. However, beyond imaging for oncology purposes, the ability to selectively visualize a given disease biomarker, which can range from aberrant enzymatic activity to the overproduction of reactive small molecules, is also being exploited to study a myriad of noncancerous disease states. In this review, we have assembled a collection of recent papers to highlight the design principles that enable activity-based sensing via PA imaging with respect to biomarker identification and strategies to trigger probe activation under specific conditions.

Tetrazine-Derived Near-Infrared Dye for Targeted Photoacoustic Imaging of Bone

A near-infrared photoacoustic probe was used to image bone in vivo through active and bioorthogonal pretargeting strategies that utilized coupling between a tetrazine-derived cyanine dye and a trans-cyclooctene-modified bisphosphonate. In vitro hydroxyapatite binding of the probe via active and pretargeting strategies showed comparable increases in percent binding vs a nontargeted control. Intrafemoral injection of the bisphosphonate-dye conjugate showed retention out to 24 h post-injection, with a 14-fold increase in signal over background, while the nontargeted dye exhibited negligible binding to bone and signal washout by 4 h post-injection. Intravenous injection, using both active and pretargeting strategies, demonstrated bone accumulation as earlier as 4 h post-injection, where the signal was found to be 3.6- and 1.5-fold higher, respectively, than the signal from the nontargeted dye. The described bone-targeted dye enabled in vivo photoacoustic imaging, while the synthetic strategy provides a convenient building block for developing new targeted photoacoustic probes.

Application of photoacoustic computed tomography in biomedical imaging: A literature review

Photoacoustic computed tomography (PACT) is a hybrid imaging modality that combines optical excitation and acoustic detection techniques. It obtains high-resolution deep-tissue images based on the deep penetration of light, the anisotropy of light absorption in objects, and the photoacoustic effect. Hence, PACT shows great potential in biomedical sample imaging. Recently, due to its advantages of high sensitivity to optical absorption and wide scalability of spatial resolution with the desired imaging depth, PACT has received increasing attention in preclinical and clinical practice. To date, there has been a proliferation of PACT systems designed for specific biomedical imaging applications, from small animals to human organs, from ex vivo to in vivo real-time imaging, and from simple structural imaging to functional and molecular imaging with external contrast agents. Therefore, it is of great importance to summarize the previous applications of PACT systems in biomedical imaging and clinical practice. In this review, we searched for studies related to PACT imaging of biomedical tissues and samples over the past two decades; divided the studies into two categories, PACT imaging of preclinical animals and PACT imaging of human organs and body parts; and discussed the significance of the studies. Finally, we pointed out the future directions of PACT in biomedical applications. With the development of exogenous contrast agents and advances of imaging technique, in the future, PACT will enable biomedical imaging from organs to whole bodies, from superficial vasculature to internal organs, from anatomy to functions, and will play an increasingly important role in biomedical research and clinical practice.

Acoustic-Based Theranostic Probes Activated by Tumor Microenvironment for Accurate Tumor Diagnosis and Assisted Tumor Therapy

Acoustic-based imaging techniques, including ultrasonography and photoacoustic imaging, are powerful noninvasive approaches for tumor imaging owing to sound transmission facilitation, deep tissue penetration, and high spatiotemporal resolution. Usually, imaging modes were classified into "always-on" mode and "activatable" mode. Conventional "always-on" acoustic-based probes often have difficulty distinguishing lesion regions of interest from surrounding healthy tissues due to poor target-to-background signal ratios. As compared, activatable probes have attracted attention with improved sensitivity, which can boost or amplify imaging signals only in response to specific biomolecular recognition or interactions. The tumor microenvironment (TME) exhibits abnormal physiological conditions that can be used to identify tumor sections from normal tissues. Various types of organic dyes and biomaterials can react with TME, leading to obvious changes in their optical properties. The TME also affects the self-assembly or aggregation state of nanoparticles, which can be used to design activatable imaging probes. Moreover, acoustic-based imaging probes and therapeutic agents can be coencapsulated into one nanocarrier to develop nanotheranostic probes, achieving tumor imaging and cooperative therapy. Satisfactorily, ultrasound waves not only accelerate the release of encapsulated therapeutic agents but also activate therapeutic agents to exert or enhance their therapeutic performance. Meanwhile, various photoacoustic probes can convert photon energy into heat under irradiation, achieving photoacoustic imaging and cooperative photothermal therapy. In this review, we focus on the recently developed TME-triggered ultrasound and photoacoustic theranostic probes for precise tumor imaging and targeted tumor therapy.

Progress of photoacoustic imaging combined with targeted photoacoustic contrast agents in tumor molecular imaging

Molecular imaging visualizes, characterizes, and measures biological processes at the molecular and cellular level. In oncology, molecular imaging is an important technology to guide integrated and precise diagnosis and treatment. Photoacoustic imaging is mainly divided into three categories: photoacoustic microscopy, photoacoustic tomography and photoacoustic endoscopy. Different from traditional imaging technology, which uses the physical properties of tissues to detect and identify diseases, photoacoustic imaging uses the photoacoustic effect to obtain the internal information of tissues. During imaging, lasers excite either endogenous or exogenous photoacoustic contrast agents, which then send out ultrasonic waves. Currently, photoacoustic imaging in conjunction with targeted photoacoustic contrast agents is frequently employed in the research of tumor molecular imaging. In this study, we will examine the latest advancements in photoacoustic imaging technology and targeted photoacoustic contrast agents, as well as the developments in tumor molecular imaging research.

Looking deep inside tissue with photoacoustic molecular probes: a review

Significance

Deep tissue noninvasive high-resolution imaging with light is challenging due to the high degree of light absorption and scattering in biological tissue. Photoacoustic imaging (PAI) can overcome some of the challenges of pure optical or ultrasound imaging to provide high-resolution deep tissue imaging. However, label-free PAI signals from light absorbing chromophores within the tissue are nonspecific. The use of exogeneous contrast agents (probes) not only enhances the imaging contrast (and imaging depth) but also increases the specificity of PAI by binding only to targeted molecules and often providing signals distinct from the background.

Aim

We aim to review the current development and future progression of photoacoustic molecular probes/contrast agents.

Approach

First, PAI and the need for using contrast agents are briefly introduced. Then, the recent development of contrast agents in terms of materials used to construct them is discussed. Then, various probes are discussed based on targeting mechanisms, in vivo molecular imaging applications, multimodal uses, and use in theranostic applications.

Results

Material combinations are being used to develop highly specific contrast agents. In addition to passive accumulation, probes utilizing activation mechanisms show promise for greater controllability. Several probes also enable concurrent multimodal use with fluorescence, ultrasound, Raman, magnetic resonance imaging, and computed tomography. Finally, targeted probes are also shown to aid localized and molecularly specific photo-induced therapy.

Conclusions

The development of contrast agents provides a promising prospect for increased contrast, higher imaging depth, and molecularly specific information. Of note are agents that allow for controlled activation, explore other optical windows, and enable multimodal use to overcome some of the shortcomings of label-free PAI.

Photoacoustic imaging phantoms for assessment of object detectability and boundary buildup artifacts

Standardized phantoms and test methods are needed to accelerate clinical translation of emerging photoacoustic imaging (PAI) devices. Evaluating object detectability in PAI is challenging due to variations in target morphology and artifacts including boundary buildup. Here we introduce breast fat and parenchyma tissue-mimicking materials based on emulsions of silicone oil and ethylene glycol in polyacrylamide hydrogel. 3D-printed molds were used to fabricate solid target inclusions that produced more filled-in appearance than traditional PAI phantoms. Phantoms were used to assess understudied image quality characteristics (IQCs) of three PAI systems. Object detectability was characterized vs. target diameter, absorption coefficient, and depth. Boundary buildup was quantified by target core/boundary ratio, which was higher in transducers with lower center frequency. Target diameter measurement accuracy was also size-dependent and improved with increasing transducer frequency. These phantoms enable evaluation of multiple key IQCs and may support development of comprehensive standardized test methods for PAI devices.

Spatially resolved immune microenvironmental profiling for follicular thyroid carcinoma with minimal capsular invasion

Spatial profiles of the tumor-immune microenvironment are associated with disease progression and clinicopathological factors in various cancers. Follicular thyroid carcinoma (FTC) is the second most common thyroid cancer, where the presence of capsular invasion or angioinvasion determines the pathological diagnosis; however, little is known about the immune microenvironment profiles associated with the acquisition of invasive potential of FTC. In this study, we focused on FTC with minimal capsular invasion, and the spatially resolved immune microenvironment of FTC was studied in the discovery (n = 13) and validation cohorts (n = 40). CD8⁺ T cells, helper T cells, regulatory T cells, B cells, natural killer cells, tumor-associated macrophages, CD66⁺ granulocytes, mature dendritic cells, and mast cells were quantitatively evaluated in single tissue sections, via a 12-marker multiplex immunohistochemistry and image cytometry. Cell densities and compositions of immune cells were spatially stratified by six tissue regions including tumor center, subcapsular region, capsular invasion, adjacent stroma of capsular invasion, peritumoral stroma, and adjacent normal. Lymphoid cell lineages in the tumor center and subcapsular regions were significantly lower than those in adjacent normal and peritumoral stroma, potentially related to the lymphoid lineage exclusion from the intratumoral regions of FTC. Interestingly, immune cell composition profiles in the capsular invasive front were distinct from those of intratumoral region. The ratios of T cells to CD66b⁺ granulocytes with capsular invasion were significantly higher than those without capsular invasion, suggesting the presence of a unique immune microenvironment at the invasive front between tumor foci and stroma. In addition, tumor cells at the capsular invasive front showed significantly higher expression of tumor programmed cell death ligand 1 (PD-L1) than those at the tumor center. This study revealed spatial immune profiles associated with capsular invasion of FTC, providing new insights into the mechanisms underlying its development and initial invasion.

Fluorescence Polarization Imaging of Methylene Blue Facilitates Quantitative Detection of Thyroid Cancer in Single Cells

Simple Summary

Accurate diagnosis of thyroid fine-needle aspiration cytology is a significant clinical challenge. A method to detect thyroid cancer at the cellular level would be invaluable to reduce diagnostic uncertainty and improve clinical decision making. We studied the ability of confocal fluorescence polarization imaging of an exogenous fluorophore, methylene blue, to provide quantitative discrimination of cancerous cells in human samples. Our results indicate that fluorescence polarization imaging provides a reliable biomarker of thyroid cancer and holds the potential to shift the paradigm of cellular level cancer diagnosis from subjective visual assessment to objective measurement.

Abstract

Background: Diagnostic accuracy of the standard of care fine-needle aspiration cytology (FNAC) remains a significant problem in thyroid oncology. Therefore, a robust and accurate method for reducing uncertainty of cytopathological evaluation would be invaluable. Methods: In this double-blind study, we employed fluorescence emission and quantitative fluorescence polarization (Fpol) confocal imaging for sorting thyroid cells into benign/malignant categories. Samples were collected from malignant tumors, benign nodules, and normal thyroid epithelial tissues. Results: A total of 32 samples, including 12 from cytologically indeterminate categories, were stained using aqueous methylene blue (MB) solution, imaged, and analyzed. Fluorescence emission images yielded diagnostically relevant information on cytomorphology. Significantly higher MB Fpol was measured in thyroid cancer as compared to benign and normal cells. The results obtained from 12 indeterminate samples revealed that MB Fpol accurately differentiated benign and malignant thyroid nodules. Conclusions: The developed imaging approach holds the potential to provide an accurate and objective biomarker for thyroid cancer, improve diagnostic accuracy of cytopathology, and decrease the number of lobectomy and near-total thyroidectomy procedures.

Gold nanoparticles conjugated with DNA aptamer for photoacoustic detection of human matrix metalloproteinase-9

Matrix metalloproteinase-9 (MMP-9) plays major roles in extracellular matrix (ECM) remodeling and membrane protein cleavage, suggesting a high correlation with cancer cell invasion and tumor metastasis. Here, we present a contrast agent based on a DNA aptamer that can selectively target human MMP-9 in the tumor microenvironment (TME) with high affinity and sensitivity. Surface modification of plasmonic gold nanospheres with the MMP-9 aptamer and its complementary sequences allows the nanospheres to aggregate in the presence of human MMP-9 through DNA displacement and hybridization. Aggregation of gold nanospheres enhances the optical absorption in the first near-infrared window (NIR-I) due to the plasmon coupling effect, thereby allowing us to detect the aggregated gold nanospheres within the TME via ultrasound-guided photoacoustic (US/PA) imaging. Selective and sensitive detection of human MMP-9 via US/PA imaging is demonstrated in solution of nanosensors with the pre-treatment of human MMP-9, in vitro in cell culture, and in vivo in a xenograft murine model of human breast cancer.

Targeted contrast agents and activatable probes for photoacoustic imaging of cancer

Photoacoustic (PA) imaging has emerged as a powerful technique for the high resolution visualization of biological processes within deep tissue. Through the development and application of exogenous targeted contrast agents and activatable probes that can respond to a given cancer biomarker, researchers can image molecular events in vivo during cancer progression. This information can provide valuable details that can facilitate cancer diagnosis and therapy monitoring. In this tutorial review, we provide a step-by-step guide to select a cancer biomarker and subsequent approaches to design imaging agents for in vivo use. We envision this information will be a useful summary to those in the field, new members to the community, and graduate students taking advanced imaging coursework. We also highlight notable examples from the recent literature, with emphasis on the molecular designs and their in vivo PA imaging performance. To conclude, we provide our outlook and future perspective in this exciting field.

Glycerol-in-SEBS gel as a material to manufacture stable wall-less vascular phantom for ultrasound and photoacoustic imaging

Styrene-ethylene/butylene-styrene (SEBS) copolymer-in-mineral oil gel is an appropriate tissue-mimicking material to manufacture stable phantoms for ultrasound and photoacoustic imaging. Glycerol dispersion has been proposed to further tune the acoustic properties and to incorporate hydrophilic additives into SEBS gel. However, this type of material has not been investigated to produce wall-less vascular flow phantom for these imaging modalities. In this paper, the development of a wall-less vascular phantom for ultrasound and photoacoustic imaging is reported. Mixtures of glycerol/TiO₂-in-SEBS gel samples were manufactured at different proportions of glycerol (10%, 15%, and 20%) and TiO₂(0% to 0.5%) to characterize their optical and acoustic properties. Optical absorption in the 500-950 nm range was independent of the amount of glycerol and TiO₂, while optical scattering increased linearly with the concentration of TiO₂. Acoustic attenuation and speed of sound were not influenced by the presence of TiO₂. The sample manufactured using weight percentages of 10% SEBS, 15% glycerol, and 0.2% TiO₂was selected to make the vascular phantom. The phantom proved to be stable during the pulsatile blood-mimicking fluid (BMF) flow, without any observed damage to its structure or leaks. Ultrasound color Doppler images showed a typical laminar flow, while the B-mode images showed a homogeneous speckled pattern due to the presence of the glycerol droplets in the gel. The photoacoustic images of the phantom showed a well-defined signal coming from the surface of the phantom and from the vessels where BMF was flowing. The Spearman's correlations between the photoacoustic and tabulated spectra calculated from the regions containing BMF, in this case a mixture of salt solutions (NiCl₂and CuSO₄), were higher than 0.95. Our results demonstrated that glycerol-in-SEBS gel was an adequate material to make a stable vascular flow phantom for ultrasound photoacoustic imaging.

Emerging imaging methods to study whole-brain function in rodent models

In the past decade, the idea that single populations of neurons support cognition and behavior has gradually given way to the realization that connectivity matters and that complex behavior results from interactions between remote yet anatomically connected areas that form specialized networks. In parallel, innovation in brain imaging techniques has led to the availability of a broad set of imaging tools to characterize the functional organization of complex networks. However, each of these tools poses significant technical challenges and faces limitations, which require careful consideration of their underlying anatomical, physiological, and physical specificity. In this review, we focus on emerging methods for measuring spontaneous or evoked activity in the brain. We discuss methods that can measure large-scale brain activity (directly or indirectly) with a relatively high temporal resolution, from milliseconds to seconds. We further focus on methods designed for studying the mammalian brain in preclinical models, specifically in mice and rats. This field has seen a great deal of innovation in recent years, facilitated by concomitant innovation in gene-editing techniques and the possibility of more invasive recordings. This review aims to give an overview of currently available preclinical imaging methods and an outlook on future developments. This information is suitable for educational purposes and for assisting scientists in choosing the appropriate method for their own research question.

Aluminum naphthalocyanine conjugate as an MMP-2-activatable photoacoustic probe for in vivo tumor imaging

Matrix metalloproteinase-2 (MMP-2), which is one of MMPs family, is known as an extracellular gelatinase controlling cancer cell adhesion, growth, and metastasis. Because of the great interest in MMP-2 activity, the detailed protocols for evaluating MMP-2-responsive contrast agents, especially photoacoustic probes for in vivo use, are helpful for researchers in the field. We here describe the detailed synthetic procedure of MMP-2-activatable photoacoustic probe AlNc-pep-PEG consisting of aluminum naphthalocyanine, MMP-2-responsive peptide sequence, and poly(ethylene glycol), which has recently been developed in our research group. The detailed measurement protocol of photoacoustic signal intensity in vitro and in vivo by using in-house built photoacoustic signal measurement system and photoacoustic imaging apparatus are also summarized.

MMP-2-Activatable Photoacoustic Tumor Imaging Probes Based on Al- and Si-Naphthalocyanines

Enzyme-activatable photoacoustic probes are powerful contrast agents to visualize diseases in which a specific enzyme is overexpressed. In this study, aluminum and silicon naphthalocyanines (AlNc and SiNc, respectively) conjugated with matrix metalloprotease-2 (MMP-2)-responsive PLGLAG peptide sequence and poly(ethylene glycol) (PEG) as an axial ligand were designed and synthesized. AlNc-peptide-PEG conjugates AlNc-pep-PEG formed dimeric species interacting with each other through face-to-face H-aggregation in water, while SiNc-based conjugates SiNc-pep-PEG hardly interacted with each other because of the two bulky hydrophilic axial ligands. Both conjugates formed spherical nanometer-sized self-assemblies in water, generating photoacoustic waves under near-infrared photoirradiation. The treatment of MNc-peptide-PEG conjugates (M = Al, Si) with MMP-2 smoothly induced the cleavage of the PLGLAG sequence to release the hydrophilic PEG moiety, resulting in the aggregation of MNcs. By comparing the PA signal intensity changes at 680 and 760 nm, the photoacoustic signal intensity ratios were shown to be enhanced by 3-5 times after incubation with MMP-2. We demonstrated that MNc-peptide-PEG conjugates (M = Al, Si) could work as activatable photoacoustic probes in the in vitro experiment of MMP-2-overexpressed cell line HT-1080 as well as the in vivo photoacoustic imaging of HT-1080-bearing mice.

Polyacrylamide hydrogel phantoms for performance evaluation of multispectral photoacoustic imaging systems

As photoacoustic imaging (PAI) begins to mature and undergo clinical translation, there is a need for well-validated, standardized performance test methods to support device development, quality control, and regulatory evaluation. Despite recent progress, current PAI phantoms may not adequately replicate tissue light and sound transport over the full range of optical wavelengths and acoustic frequencies employed by reported PAI devices. Here we introduce polyacrylamide (PAA) hydrogel as a candidate material for fabricating stable phantoms with well-characterized optical and acoustic properties that are biologically relevant over a broad range of system design parameters. We evaluated suitability of PAA phantoms for conducting image quality assessment of three PAI systems with substantially different operating parameters including two commercial systems and a custom system. Imaging results indicated that appropriately tuned PAA phantoms are useful tools for assessing and comparing PAI system image quality. These phantoms may also facilitate future standardization of performance test methodology.

Optoacoustic imaging in endocrinology and metabolism

Imaging is an essential tool in research, diagnostics and the management of endocrine disorders. Ultrasonography, nuclear medicine techniques, MRI, CT and optical methods are already used for applications in endocrinology. Optoacoustic imaging, also termed photoacoustic imaging, is emerging as a method for visualizing endocrine physiology and disease at different scales of detail: microscopic, mesoscopic and macroscopic. Optoacoustic contrast arises from endogenous light absorbers, such as oxygenated and deoxygenated haemoglobin, lipids and water, or exogenous contrast agents, and reveals tissue vasculature, perfusion, oxygenation, metabolic activity and inflammation. The development of high-performance optoacoustic scanners for use in humans has given rise to a variety of clinical investigations, which complement the use of the technology in preclinical research. Here, we review key progress with optoacoustic imaging technology as it relates to applications in endocrinology; for example, to visualize thyroid morphology and function, and the microvasculature in diabetes mellitus or adipose tissue metabolism, with particular focus on multispectral optoacoustic tomography and raster-scan optoacoustic mesoscopy. We explain the merits of optoacoustic microscopy and focus on mid-infrared optoacoustic microscopy, which enables label-free imaging of metabolites in cells and tissues. We showcase current optoacoustic applications within endocrinology and discuss the potential of these technologies to advance research and clinical practice.

In vivo photoacoustic imaging for monitoring treatment outcome of corneal neovascularization with metformin eye drops

Corneal neovascularization (CNV) compromises corneal avascularity and visual acuity. Current clinical visualization approaches are subjective and unable to provide molecular information. Photoacoustic (PA) imaging offers an objective and non-invasive way for angiogenesis investigation through hemodynamic and oxygen saturation level (sO₂) quantification. Here, we demonstrate the utility of PA and slit lamp microscope for in vivo rat CNV model. PA images revealed untreated corneas exhibited higher sO₂ level than treatment groups. The PA results complement with the color image obtained with slit lamp. These data suggest PA could offer an objective and non-invasive method for monitoring CNV progression and treatment outcome through the sO₂ quantification.

Biosensors and bioassays for determination of matrix metalloproteinases: state of the art and recent advances

Matrix metalloproteinases (MMPs) are closely associated with various physiological and pathological processes, and have been regarded as potential biomarkers for severe diseases including cancer. Accurate determination of MMPs would advance our understanding of their roles in disease progression, and is of great significance for disease diagnosis, treatment and prognosis. In this review, we present a comprehensive overview of the developed bioassays/biosensors for detection of MMPs, and highlight the recent advancement in nanomaterial-based immunoassays for MMP abundance measurements and nanomaterial-based biosensors for MMP activity determination. Enzyme-linked immunosorbent assay (ELISA)-based immunoassays provide information about total levels of MMPs with high specificity and sensitivity, while target-based biosensors measure the amounts of active MMPs, and allow imaging of MMP activities in vivo. For multiplex and high-throughput analysis of MMPs, microfluidics and microarray-based assays are described. Additionally, we put forward the existing challenges and future prospects from our perspective.

Extending Imaging Depth in PLD-Based Photoacoustic Imaging: Moving Beyond Averaging

Pulsed laser diodes (PLDs) promise to be an attractive alternative to solid-state laser sources in photoacoustic tomography (PAT) due to their portability, high-pulse repetition frequency (PRF), and cost effectiveness. However, due to their lower energy per pulse, which, in turn, results in lower fluence required per photoacoustic signal generation, PLD-based photoacoustic systems generally have maximum imaging depth that is lower in comparison to solid-state lasers. Averaging of multiple frames is usually employed as a common practice in high PRF PLD systems to improve the signal-to-noise ratio of the PAT images. In this work, we demonstrate that by combining the recently described approach of subpitch translation on the receive-side ultrasound transducer alongside averaging of multiple frames, it is feasible to increase the depth sensitivity in a PLD-based PAT imaging system. Here, experiments on phantom containing diluted India ink targets were performed at two different laser energy level settings, that is, 21 and [Formula: see text]. Results obtained showed that the imaging depth improves by ~38.5% from 9.1 to 12.6 mm for 21- [Formula: see text] energy level setting and by ~33.3% from 10.8 to 14.4 mm for 27- [Formula: see text] energy level setting by using λ /4-pitch translation and average of 128 frames in comparison to λ -pitch data acquired with the average of 128 frames. However, the achievable frame rate is reduced by a factor of 2 and 4 for λ /2 and λ /4 subpitch translation, respectively.

Imaging the Human Thyroid Using Three-Dimensional Diffuse Optical Tomography: A Preliminary Study

Thyroid cancer is usually diagnosed by ultrasound imaging and fine-needle aspiration biopsy. However, diagnosis of follicular thyroid carcinomas (FTC) is difficult because FTC lacks nuclear atypia and a consensus on histological interpretation. Diffuse optical tomography (DOT) offers the potential to diagnose FTC because it can measure tumor hypoxia, while image reconstruction of the thyroid is still challenging mainly due to the complex anatomical features of the neck. In this study, we attempted to solve this issue by creating a finite element model of the human neck excluding the trachea (a void region). By reconstruction of the absorption coefficients at three wavelengths, 3D tissue oxygen saturation maps of the human thyroid are obtained for the first time by DOT.

New directions of activity-based sensing for in vivo NIR imaging

In vivo imaging is a powerful approach to study biological processes. Beyond cellular methods, in vivo studies allow for biological stimuli (small molecules or proteins) to be studied in their native environment. This has the potential to aid in the discovery of new biology and guide the development of diagnostics and therapies for diseases. To ensure selectivity and an observable readout, the probe development field is shifting towards activity-based sensing (ABS) approaches and near-infrared (NIR) imaging modalities. This perspective will highlight recent in vivo ABS applications that utilize NIR imaging platforms.

High-Resolution Photoacoustic Tomography for Early-Stage Cancer Detection and Its Clinical Translation

Diagnosing cancer during early stages can substantially increase the cure rate, decrease the recurrence rate, and reduce health care costs. Over the past few decades, the continual development of new medical imaging modalities has been an important factor for diagnosing cancer, selecting therapies, and monitoring response to treatment. Photoacoustic tomography (PAT) is a hybrid imaging modality combining optical contrast from absorption of light with the outstanding spatiotemporal resolution of US imaging, providing biomedical morphologic and functional information of early-stage cancer. In this review, the basics and modalities of PAT, as well as a summary of its state-of-art applications in early-stage cancer (breast cancer, melanoma, and prostate cancer) detection and treatment guidance will be introduced. The potential clinical translation in cancer detection of PAT and prospects for the possibilities to lead to further clinical breakthroughs will also be discussed. Keywords: Molecular Imaging-Cancer, Photoacoustic Imaging © RSNA, 2020.

Towards Clinical Translation of LED-Based Photoacoustic Imaging: A Review

Photoacoustic imaging, with the capability to provide simultaneous structural, functional, and molecular information, is one of the fastest growing biomedical imaging modalities of recent times. As a hybrid modality, it not only provides greater penetration depth than the purely optical imaging techniques, but also provides optical contrast of molecular components in the living tissue. Conventionally, photoacoustic imaging systems utilize bulky and expensive class IV lasers, which is one of the key factors hindering the clinical translation of this promising modality. Use of LEDs which are portable and affordable offers a unique opportunity to accelerate the clinical translation of photoacoustics. In this paper, we first review the development history of LED as an illumination source in biomedical photoacoustic imaging. Key developments in this area, from point-source measurements to development of high-power LED arrays, are briefly discussed. Finally, we thoroughly review multiple phantom, ex-vivo, animal in-vivo, human in-vivo, and clinical pilot studies and demonstrate the unprecedented preclinical and clinical potential of LED-based photoacoustic imaging.

Photoacoustic image-guided interventions

Photoacoustic imaging has demonstrated its potential for diagnosis over the last few decades. In recent years, its unique imaging capabilities, such as detecting structural, functional and molecular information in deep regions with optical contrast and ultrasound resolution, have opened up many opportunities for photoacoustic imaging to be used during image-guided interventions. Numerous studies have investigated the capability of photoacoustic imaging to guide various interventions such as drug delivery, therapies, surgeries, and biopsies. These studies have demonstrated that photoacoustic imaging can guide these interventions effectively and non-invasively in real-time. In this minireview, we will elucidate the potential of photoacoustic imaging in guiding active and passive drug deliveries, photothermal therapy, and other surgeries and therapies using endogenous and exogenous contrast agents including organic, inorganic, and hybrid nanoparticles, as well as needle-based biopsy procedures. The advantages of photoacoustic imaging in guided interventions will be discussed. It will, therefore, show that photoacoustic imaging has great potential in real-time interventions due to its advantages over current imaging modalities like computed tomography, magnetic resonance imaging, and ultrasound imaging.

Photoacoustic imaging of cells in a three-dimensional microenvironment

Imaging live cells in a three-dimensional (3D) culture system yields more accurate information and spatial visualization of the interplay of cells and the surrounding matrix components compared to using a two-dimensional (2D) cell culture system. However, the thickness of 3D cultures results in a high degree of scattering that makes it difficult for the light to penetrate deeply to allow clear optical imaging. Photoacoustic (PA) imaging is a powerful imaging modality that relies on a PA effect generated when light is absorbed by exogenous contrast agents or endogenous molecules in a medium. It combines a high optical contrast with a high acoustic spatiotemporal resolution, allowing the noninvasive visualization of 3D cellular scaffolds at considerable depths with a high resolution and no image distortion. Moreover, advances in targeted contrast agents have also made PA imaging capable of molecular and cellular characterization for use in preclinical personalized diagnostics or PA imaging-guided therapeutics. Here we review the applications and challenges of PA imaging in a 3D cellular microenvironment. Potential future developments of PA imaging in preclinical applications are also discussed.

Spatial heterogeneity of nanomedicine investigated by multiscale imaging of the drug, the nanoparticle and the tumour environment

Genetic and phenotypic tumour heterogeneity is an important cause of therapy resistance. Moreover, non-uniform spatial drug distribution in cancer treatment may cause pseudo-resistance, meaning that a treatment is ineffective because the drug does not reach its target at sufficient concentrations. Together with tumour heterogeneity, non-uniform drug distribution causes “therapy heterogeneity”: a spatially heterogeneous treatment effect. Spatial heterogeneity in drug distribution occurs on all scales ranging from interpatient differences to intratumour differences on tissue or cellular scale. Nanomedicine aims to improve the balance between efficacy and safety of drugs by targeting drug-loaded nanoparticles specifically to tumours. Spatial heterogeneity in nanoparticle and payload distribution could be an important factor that limits their efficacy in patients. Therefore, imaging spatial nanoparticle distribution and imaging the tumour environment giving rise to this distribution could help understand (lack of) clinical success of nanomedicine. Imaging the nanoparticle, drug and tumour environment can lead to improvements of new nanotherapies, increase understanding of underlying mechanisms of heterogeneous distribution, facilitate patient selection for nanotherapies and help assess the effect of treatments that aim to reduce heterogeneity in nanoparticle distribution.

In this review, we discuss three groups of imaging modalities applied in nanomedicine research: non-invasive clinical imaging methods (nuclear imaging, MRI, CT, ultrasound), optical imaging and mass spectrometry imaging. Because each imaging modality provides information at a different scale and has its own strengths and weaknesses, choosing wisely and combining modalities will lead to a wealth of information that will help bring nanomedicine forward.

Optical and Optoacoustic Imaging

The present chapter summarizes progress with optical methods that go beyond human vision. The focus is on two particular technologies: fluorescence molecular imaging and optoacoustic (photoacoustic) imaging. The rationale for the selection of these two methods is that in contrast to optical microscopy techniques, both fluorescence and optoacoustic imaging can achieve large fields of view, i.e., spanning several centimeters in two or three dimensions. Such fields of views relate better to human vision and can visualize large parts of tissue, a necessary premise for clinical detection. Conversely, optical microscopy methods only scan millimeter-sized dimensions or smaller. With such operational capacity, optical microscopy methods need to be guided by another visualization technique in order to scan a very specific area in tissue and typically only provide superficial measurements, i.e., information from depths that are of the order of 0.05-1 mm. This practice has generally limited their clinical applicability to some niche applications, such as optical coherence tomography of the retina. On the other hand, fluorescence molecular imaging and optoacoustic imaging emerge as more global optical imaging methods with wide applications in surgery, endoscopy, and non-invasive clinical imaging, as summarized in the following. The current progress in this field is based on a volume of recent review and other literature that highlights key advances achieved in technology and biomedical applications. Context and figures from references from the authors of this chapter have been used here, as it reflects our general view of the current status of the field.

Performance Characteristics of Photoacoustic Imaging Probes with Varying Frequencies and Light-delivery Schemes

Photoacoustic imaging (PAI) is an emerging biomedical imaging technique that utilizes a combination of light and ultrasound to detect photoabsorbers embedded within tissues. While the clinical utility of PAI has been widely explored for several applications, limitations in light penetration and detector sensitivity have restricted these studies to mostly superficial sites. Given the importance of PA signal generation and detection on light delivery and ultrasound detector frequency, there is an ongoing effort to optimize these parameters to enhance photoabsorber detection at increased depths. With this in mind, in this study we examined performance benchmarks of a commercially available PAI/ultrasound linear array system when using different imaging frequencies and light delivery schemes. A modified light fiber jacket providing focused light delivery (FLD) at the center of the probe was compared with the built-in fiber optics lining the length of the probe. Studies were performed in vitro to compare performance characteristics such as imaging resolution, maximum imaging depth, and sensitivity to varying hematocrit concentration for each frequency and light delivery method. Monte Carlo simulations of each light delivery method revealed increased light penetration with FLD. In tissue-mimicking phantoms, vascular channels used to simulate blood vessels could be visualized at a depth of 2.4 cm when lowering imaging frequency and utilizing FLD. Imaging at lower frequencies with FLD also enabled enhanced detection of varying hematocrit concentration levels at increased depths, although lateral imaging resolution was reduced. Finally, a proof of concept in vivo probe comparison study in a mouse tumor model provided supportive evidence of our in vitro results. Collectively, our findings show that adjusting imaging frequency and applying FLD can be a straightforward approach for improving PAI performance.

Photoacoustic Detection of Superoxide Using Oxoporphyrinogen and Porphyrin

The superoxide (O₂^•-) ion is a highly reactive oxygen species involved in many diseases; hence, its noninvasive detection is desirable to identify the onset of pathological processes. Here, we employed photoacoustic (PA) spectroscopy, which enables imaging at ultrasound resolution with the sensitivity of optical modality, for the first time to detect O₂^•-, using stimuli-responsive contrast agents. meso-(3,5-Di-tert-butyl 4-hydroxyphenyl) porphyrins and oxoporphyrinogens were used as PA contrast agents, which trap the O₂^•- and enable its detection. The trapped O₂^•- increased the PA signal amplitude of chromophores up to 9.6-fold, and induced a red-shift in the PA signal maxima of up to 225 nm. Therefore, these trigger-responsive probes may be highly valuable as smart diagnostic PA probes to investigate pathological events stimulated by O₂^•- species.

Recent progress in the imaging detection of enzyme activities in vivo

Enzymatic activities are important for normal physiological processes and are also critical regulatory mechanisms for many pathologies. Identifying the enzyme activities in vivo has considerable importance in disease diagnoses and monitoring of the physiological metabolism. In the past few years, great strides have been made towards the imaging detection of enzyme activity in vivo based on optical modality, MRI modality, nuclear modality, photoacoustic modality and multifunctional modality. This review summarizes the latest advances in the imaging detection of enzyme activities in vivo reported within the past years, mainly concentrating on the probe design, imaging strategies and demonstration of enzyme activities in vivo. This review also highlights the potential challenges and the further directions of this field.

Photoacoustic imaging as a tool to probe the tumour microenvironment

The tumour microenvironment (TME) is a complex cellular ecosystem subjected to chemical and physical signals that play a role in shaping tumour heterogeneity, invasion and metastasis. Studying the roles of the TME in cancer progression would strongly benefit from non-invasive visualisation of the tumour as a whole organ in vivo, both preclinically in mouse models of the disease, as well as in patient tumours. Although imaging techniques exist that can probe different facets of the TME, they face several limitations, including limited spatial resolution, extended scan times and poor specificity from confounding signals. Photoacoustic imaging (PAI) is an emerging modality, currently in clinical trials, that has the potential to overcome these limitations. Here, we review the biological properties of the TME and potential of existing imaging methods that have been developed to analyse these properties non-invasively. We then introduce PAI and explore the preclinical and clinical evidence that support its use in probing multiple features of the TME simultaneously, including blood vessel architecture, blood oxygenation, acidity, extracellular matrix deposition, lipid concentration and immune cell infiltration. Finally, we highlight the future prospects and outstanding challenges in the application of PAI as a tool in cancer research and as part of a clinical oncologist's arsenal.

Summary: This Review details the potential of photoacoustic imaging to visualise features of the tumour microenvironment such as blood vessels, hypoxia, fibrosis and immune infiltrate to provide unprecedented insight into tumour biology.

Photoacoustic imaging with low-cost sources; A review

Benefitting from advantages of optical and ultrasound imaging, photoacoustic imaging (PAI) has demonstrated potentials in a wide range of medical applications. In order to facilitate clinical applications of PAI and encourage its application in low-resource settings, research on low-cost photoacoustic imaging with inexpensive optical sources has gained attention. Here, we review the advances made in photoacoustic imaging with low-cost sources.

Volumetric Optoacoustic Imaging Unveils High-Resolution Patterns of Acute and Cyclic Hypoxia in a Murine Model of Breast Cancer

Mapping tumor heterogeneity and hypoxia within a living intact organism is essential for understanding the processes involved in cancer progression and assessing long-term responses to therapies. Efficient investigations into tumor hypoxia mechanisms have been hindered by the lack of intravital imaging tools capable of multiparametric probing of entire solid tumors with high spatial and temporal resolution. Here, we exploit volumetric multispectral optoacoustic tomography (vMSOT) for accurate, label-free delineation of tumor heterogeneity and dynamic oxygenation behavior. Mice bearing orthotopic MDA-MB-231 breast cancer xenografts were imaged noninvasively during rest and oxygen stress challenge, attaining time-lapse three-dimensional oxygenation maps across entire tumors with 100 μm spatial resolution. Volumetric quantification of the hypoxic fraction rendered values of 3.9% to 21.2%, whereas the oxygen saturation (sO₂) rate declined at 1.7% to 2.3% per mm in all tumors when approaching their core. Three distinct functional areas (the rim, hypoxic, and normoxic cores) were clearly discernible based on spatial sO₂ profiles and responses to oxygen challenge. Notably, although sO₂ readings were responsive to the challenge, deoxyhemoglobin (HbR) trends exhibited little to no variations in all mice. Dynamic analysis further revealed the presence of cyclic hypoxia patterns with a 21% average discrepancy between cyclic fractions assessed via sO₂ (42.2% ± 17.3%) and HbR fluctuations (63% ± 14.1%) within the hypoxic core. These findings corroborate the strong potential of vMSOT for advancing preclinical imaging of cancer and informing clinical decisions on therapeutic interventions. SIGNIFICANCE: vMSOT provides quantitative measures of volumetric hypoxic fraction and cyclic hypoxia in a label-free and noninvasive manner, providing new readouts to aid tumor staging and treatment decision making. GRAPHICAL ABSTRACT: http://cancerres.aacrjournals.org/content/canres/79/18/4767/F1.large.jpg.See related commentary by Klibanov and Hu, p. 4577.

Controlled Nano-Bio Interface of Functional Nanoprobes for in Vivo Monitoring Enzyme Activity in Tumors

Engineering inorganic nanoparticles with a biocompatible shell to improve their physicochemical properties is a vital step in taking advantage of their superior magnetic, optical, and photothermal properties as multifunctional molecular imaging probes for disease diagnosis and treatment. The grafting/peeling-off strategy we developed for nanoparticle surface coating can fully control the targeting capability of functional nanoprobes by changing their colloidal behaviors such as diffusion and sedimentation rates at the desired sites. We demonstrated that a cleavable coating layer initially immobilized on the surface of magnetic resonance imaging probes not only makes the nanoparticles water-soluble but also can be selectively removed by specific enzymes, thereby resulting in a significant decrease of their water solubility in an enzyme-rich environment. Upon removal of surface coating, the changes in hydrodynamic size and surface charges of nanoprobes as a result of interacting with biomolecules and proteins lead to dramatic changes in their in vivo colloidal behaviors ( i. e., slow diffusion rates, tendency to aggregate and precipitate), which were quantitatively evaluated by examining changes in their hydrodynamic sizes, magnetic properties, and count rates during the size measurement. Because the retention time of nanoprobes within the tumor tissues depends on the uptake and excretion rate of the nanoprobes through the tumors, selective activation of nanoprobes by a specific enzyme resulted in much higher tumor accumulation and longer retention time within the tumors than that of the inactive nanoprobes, which passively passed through the tumors. The imaging contrast effect of tumors using activatable nanoprobes was significantly improved over using inactive probes. Therefore, the grafting/peeling-off strategy, as a general design approach for surface modification of nanoprobes, offers a promising and highly efficient way to render the nanoparticles suitable for targeted imaging of tumors.

Quantitatively Visualizing Tumor-Related Protease Activity in Vivo Using a Ratiometric Photoacoustic Probe

The abnormal expression of tumor-related proteases plays a critical role in cancer invasion, progression, and metastasis. Therefore, it is considerably meaningful to non-invasively assess the proteases' activity in vivo for both tumor diagnosis and therapeutic evaluation. Herein, we report an activatable probe constructed with a near-infrared dye (Cy5.5) and a quencher (QSY21) covalently linked through a peptide substrate of matrix metalloproteinases-2 (MMP-2) that was chosen as a model for tumor-associated proteases. Upon cleavage with activated MMP-2, this probe emitted an MMP-2-concentration-dependent fluorescence. Quite unexpectedly, owing to the variation in the aggregation state of both the dye and its quencher as a consequence of the cleavage, the responsive probe presented a dramatic MMP-2-concentration-dependent absorption at around 680 nm, while that at around 730 nm was MMP-2 concentration independent. These features allowed detection of MMP-2 activity via both fluorescence and photoacoustic (PA) imaging in vitro, respectively. Moreover, taking the PA signal at 730 nm as an internal reference, the PA signal at 680 nm allowed quantitative detection of MMP-2 expression in breast cancer in vivo. We thus envision that our current approach would offer a useful tool for studying the malignant impacts of versatile tumor-associated proteases in vivo.

Development of organic semiconducting materials for deep-tissue optical imaging, phototherapy and photoactivation

Recent progress in developing organic semiconducting materials (OSMs) for deep-tissue optical imaging, cancer phototherapy and biological photoactivation is summarized.

Switchable Photoacoustic Imaging of Glutathione Using MnO2 Nanotubes for Cancer Diagnosis

Glutathione is overexpressed in tumor cells and regulates cancer growth, metastasis, and drug resistance. Therefore, detecting glutathione levels may greatly facilitate cancer diagnosis and treatment response monitoring. Photoacoustic (PA) imaging is a noninvasive modality for high-sensitivity, high-resolution, deep-tissue optical imaging. Switchable PA probes that offer signal on/off responses to tumor targets would further improve the detection sensitivity and signal-to-noise ratio of PA imaging. Here, we explore the use of MnO₂ nanotubes as a switchable and biodegradable PA probe for dynamic imaging of glutathione in cancer. Glutathione reduces black MnO₂ nanotubes into colorless Mn²⁺ ions, leading to decreased and signal off PA amplitude. In phantoms, we observed a linear response of reduced PA signals of MnO₂ nanotubes to increased glutathione concentrations. Using melanoma as the disease model, we demonstrated that MnO₂ nanotube-based PA imaging of glutathione successfully distinguished B16F10 melanoma cells from BEAS-2B normal cells and discriminated B16F10 tumors from healthy skin tissues. Our results showed that MnO₂ nanotubes are a potent switchable and biodegradable PA probe for glutathione imaging in cancer diagnosis.

Affibody-functionalized Ag2S quantum dots for photoacoustic imaging of epidermal growth factor receptor overexpressed tumors

Photoacoustic imaging (PAI) is a new and attractive imaging modality, and it has strong potential for application in the early detection of tumors through the use of optically absorbing targeted contrast agents. Ag2S quantum dots (QD) are a promising bionanomaterial and have attracted significant attention in the field of bioimaging. In this study, water-soluble and carboxylic acid group-coated Ag2S QDs with an ultrasmall size (∼8 nm) were synthesized via a one-step method. Their surface plasmon resonance wavelength was determined to be ∼800 nm, which is ideal for PAI. Ag2S QDs were then modified with the epidermal growth factor receptor 1 (EGFR) targeted small protein affibody ZEGFR:1907. The resulted nanoprobe, ZEGFR:1907-Ag2S QDs, was then used for targeted PAI of EGFR-overexpressed tumors. The biodistribution of the nanoprobe was further measured by ex vivo near infrared fluorescence (NIRF) imaging of the dissected tissues. The PAI results showed that ZEGFR:1907-Ag2S QDs specifically image EGFR positive tumors. The biodistribution study revealed that the nanoprobe mainly accumulated in the liver, spleen and tumors; tissue H&E staining studies indicated that the probe has good biocompatibility. Overall, the affibody-functionalized Ag2S QDs are a novel targeted nanoprobe that can be used for specific PAI of tumors.

Recent progress in photoacoustic molecular imaging

By acoustically detecting the optical absorption contrast, photoacoustic (PA) tomography (PAT) has broken the penetration limits of traditional high-resolution optical imaging. Through spectroscopic analysis of the target's optical absorption, PAT can identify a wealth of endogenous and exogenous molecules and thus is inherently capable of molecular imaging with high sensitivity. PAT's molecular sensitivity is uniquely accompanied by non-ionizing radiation, high spatial resolution, and deep penetration in biological tissues, which other optical imaging modalities cannot achieve yet. In this concise review, we summarize the most recent technological advancements in PA molecular imaging and highlight the novel molecular probes specifically made for PAT in deep tissues. We conclude with a brief discussion of the opportunities for future advancements.

Photophysical Tuning of N-Oxide-Based Probes Enables Ratiometric Photoacoustic Imaging of Tumor Hypoxia

Hypoxia results when the oxygen supply to rapidly growing tumors becomes inadequate to support various physiological processes. This plays a role in tumor metastasis and treatment resistance. Therefore, identifying tumor hypoxia can guide treatment planning and predict patient responses. However, hypoxic volumes are heterogeneously dispersed throughout a tumor, making it a challenge to pinpoint them with any degree of accuracy. Herein, we report the development of ratiometric hypoxia probe 1 (rHyP-1), which is a hypoxia-responsive small-molecule probe designed for reliable hypoxia detection using photoacoustic imaging. Photoacoustic imaging utilizes near-infrared (NIR) light to induce the production of ultrasound signals, enabling high-resolution image acquisition at centimeter depths. Together with the ratiometric capability of rHyP-1, reliable hypoxia detection with unprecedented spatial resolution is possible while minimizing error associated with concentration dependence and tissue heterogeneity.

Advances in Diagnostic and Intraoperative Molecular Imaging of Pancreatic Cancer

Pancreatic ductal adenocarcinoma (PDAC) has a dismal prognosis. To improve outcomes, there is a critical need for improved tools for detection, accurate staging, and resectability assessment. This could improve patient stratification for the most optimal primary treatment modality. Molecular imaging, used in combination with tumor-specific imaging agents, can improve established imaging methods for PDAC. These novel, tumor-specific imaging agents developed to target specific biomarkers have the potential to specifically differentiate between malignant and benign diseases, such as pancreatitis. When these agents are coupled to various types of labels, this type of molecular imaging can provide integrated diagnostic, noninvasive imaging of PDAC as well as image-guided pancreatic surgery. This review provides a detailed overview of the current clinical imaging applications, upcoming molecular imaging strategies for PDAC, and potential targets for imaging, with an emphasis on intraoperative imaging applications.

Photoacoustic Probes for Molecular Detection: Recent Advances and Perspectives

Photoacoustic (PA) imaging (PAI) is a noninvasive and nonionizing biomedical imaging modality that combines the advantages of optical imaging and ultrasound imaging. Based on PAI, photoacoustic detection (PAD) is an emerging approach that is involved with the interaction between PA probes and analytes resulting in the changes of photoacoustic signals for molecular detection with rich contrast, high resolution, and deep tissue penetration. This Review focuses on the recent development of PA probes in PAD. The following contents will be discussed in detail: 1) the construction of PA probes; 2) the applications and mechanisms of PAD to different types of analytes, including microenvironments, small biomolecules, or metal ions; 3) the challenges and perspectives of PA probes in PAD.

Light Emitting Diodes based Photoacoustic Imaging and Potential Clinical Applications

Using low cost and small size light emitting diodes (LED) as the alternative illumination source for photoacoustic (PA) imaging has many advantages, and can largely benefit the clinical translation of the emerging PA imaging technology. Here, we present our development of LED-based PA imaging integrated with B-mode ultrasound. To overcome the challenge of achieving sufficient signal-to-noise ratio by the LED light that is orders of magnitude weaker than lasers, extensive signal averaging over hundreds of pulses is performed. Facilitated by the fast response of the LED and the high-speed driving as well as the high pulse repetition rate up to 16 kHz, B-mode PA images superimposed on gray-scale ultrasound of a biological sample can be achieved in real-time with frame rate up to 500 Hz. The LED-based PA imaging could be a promising tool for several clinical applications, such as assessment of peripheral microvascular function and dynamic changes, diagnosis of inflammatory arthritis, and detection of head and neck cancer.

Peptide-based nanoprobes for molecular imaging and disease diagnostics

Pathological changes in a diseased site are often accompanied by abnormal activities of various biomolecules in and around the involved cells. Identifying the location and expression levels of these biomolecules could enable early-stage diagnosis of the related disease, the design of an appropriate treatment strategy, and the accurate assessment of the treatment outcomes. Over the past two decades, a great diversity of peptide-based nanoprobes (PBNs) have been developed, aiming to improve the in vitro and in vivo performances of water-soluble molecular probes through engineering of their primary chemical structures as well as the physicochemical properties of their resultant assemblies. In this review, we introduce strategies and approaches adopted for the identification of functional peptides in the context of molecular imaging and disease diagnostics, and then focus our discussion on the design and construction of PBNs capable of navigating through physiological barriers for targeted delivery and improved specificity and sensitivity in recognizing target biomolecules. We highlight the biological and structural roles that low-molecular-weight peptides play in PBN design and provide our perspectives on the future development of PBNs for clinical translation.