Architecture and the division of labor in the extensor carpi radialis muscle of horses

Association of myostatin gene polymorphism with echocardiographic and muscular ultrasonographic measurements in Hungarian thoroughbreds horses

The g.66493737C/T polymorphism of the myostatin gene (MSTN) majorly influences muscle fiber composition and best race distance of Thoroughbreds. Thus, a better understanding of this process may lead to superior genetic exploitation for maximizing Thoroughbred athletic potential. Our objective is to investigate whether myostatin genotypes are associated with muscular development and cardiac variables of Thoroughbreds. Echocardiography and muscular ultrasonography were performed on three groups having C/C, C/T, and T/T genotypes, respectively. Each group consisted of 22 animals. Homogeneity of variance between the groups was checked by Levene's test. Multivariate analysis of variance was applied to determine differences in measured variables vs. MSTN genotypes. Fascicle length of anconeus and thickness of triceps brachii muscles showed significant differences between C/C and T/T genotypes (p_{Fascicle-length-of-anconeus} = 0.004, p_{thickness-of-triceps-brachii} < 0.001). According to the primary outcome, there are associations between myostatin genotypes and cardiac variables. Aortic diameter at the sinus of Valsalva (end-diastole and end-systole) and aortic diameter at the valve (end-systole) indicated significant differences between C/C and T/T genotypes (p_{aortic-diameter-at-the-sinus-of-Valsalva-end-diastole} = 0.015, p_{aortic-diameter-at-the-sinus-of-Valsalva-end-systole} = 0.011, p_{aortic-diameter-at-the-valve-end-systole} = 0.014). Pearson correlation effect sizes were r_{Fascicle-length-of-anconeus} = 0.460, r_{thickness-of-triceps-brachii} = 0.590, r_{aortic-diameter-at-the-sinus-of-Valsalva-end-diastole} = 0.423, r_{aortic-diameter-at-the-sinus-of-Valsalva-end-systole} = 0.450, and r_{aortic-diameter-at-the-valve-end-systole} = 0.462. C/C genotypes gave 22.1, 12.2, 6.3, 6.0, and 6.7% higher values compared to T/T genotypes, respectively. Differences regarding aortic diameter between genotype groups support the hypothesis that C/C animals have consequently increased cardiac output and aerobic capacity.

Immunohistochemistry of kangaroo rat hindlimb muscles

Kangaroo rats (Dipodomys spp.) use specialized bipedal hopping like that of kangaroos. In contrast to kangaroos that have elastic tendons capable of storing energy, kangaroo rats have inelastic tendons that are unable to store large amounts of energy. Thus, the musculature of the ankle joint provides the greatest power contribution to kangaroo rat hopping. Skeletal muscle can be characterized by several fiber types, including slow twitch (Type I) and fast twitch (Type II) fibers. Fast fibers are found in higher concentration in muscles that perform quick, dynamic movements, whereas slow fibers are found in higher proportion in muscles that perform slow, endurant movements. Using fiber type specific antibodies, we identified four pure (Types I, IIA, IIB, and IIX) and two hybrid (Types I/IIA and IIA/IIX) fiber types in six hindlimb muscles from three kangaroo rats (Dipodomys merriami) to investigate the relationship between fiber composition and hindlimb muscle function. Hindlimb muscles (except soleus) were dominated by Type IIB fibers, which were largest in cross-sectional area, and are known to be best suited for rapid and explosive movements. Oxidative Type IIA and Type IIX fibers were found at moderate concentrations and likely function in maintaining continual saltatory locomotion. Thus, kangaroo rats can use these two fiber type populations as "gears" for both endurant and explosive behaviors.

The anatomy and histochemistry of flight hindlimb posture in birds. II. The flexed hindlimb posture of perching birds

During flight, birds employ one of two hindlimb postures. Perching birds utilize a flexed posture with their folded legs tucked beneath the body, whereas shorebirds and raptors use an extended posture with straightened legs trailing behind the body. Maintenance of either posture during flight requires the hindlimbs to hold their position for prolonged periods. Slow contracting fibers are known for their fatigue-resistant properties and are often found in high percentages in muscles utilized for postural actions. Given the similar actions required of the hip and knee flexors used during flight, we hypothesized that the equivalent postural muscles of perching birds (flexed posture) would contain similar percentages of slow fibers as shorebirds (extended posture). We investigated the anatomy and fiber type composition of seven hindlimb muscles in yellow-headed and red-winged blackbirds and revealed that they possess a smaller percentage of slow fibers than we found previously in the same muscles of American avocets and black-necked stilts. The comparably smaller body size of yellow-headed and red-winged blackbirds could mitigate the need for more slow fibers. In addition, the biomechanical placement of the weight force in the flexed posture may require less muscle force for postural support during flight and, therefore, fewer slow fibers.

Parameters and functional analysis of the deep epaxial muscles in the thoracic, lumbar and sacral regions of the equine spine

The epaxial muscles produce intervertebral rotation in the transverse, vertical and axial axes. These muscles also counteract the movements induced by gravitational and inertial forces and movements produced by antagonistic muscles and the intrinsic muscles of the pelvic limb. Their fascicles are innervated by the dorsal branch of the spinal nerve, which corresponds to the metamere of its cranial insertion in the spinous process. The structure allows the function of the muscles to be predicted: those with long and parallel fibres have a shortening function, whereas the muscles with short and oblique fibres have an antigravity action. In the horse, the multifidus muscle of the thoracolumbar region extends in multiple segments of two to eight vertebral motion segments (VMS). Functionally, the multifidus muscle is considered a spine stabiliser, maintaining VMS neutrality during spine rotations. However, there is evidence of the structural and functional heterogeneity of the equine thoracolumbar multifidus muscle, depending on the VMS considered, related to the complex control of the required neuromuscular activity. Osteoarticular lesions of the spine have been directly related to asymmetries of the multifidus muscle. The lateral (LDSM) and medial (MDSM) dorsal sacrocaudal muscles may be included in the multifidus complex, the function of which is also unclear in the lumbosacral region. The functional parameters of maximum force (F_max ), maximum velocity of contraction (V_max ) and joint moment (M) of the multifidus muscles inserted in the 4th, 9th, 12th and 17th thoracic and 3rd and 4th lumbar vertebrae of six horses were studied postmortem (for example: 4MT4 indicates the multifidus muscle that crosses four metameres with cranial insertion in the T4 vertebra). Furthermore, the structural and functional characteristics of LDSM and MDSM were determined. Data were analysed by analysis of variance (anova) in a randomised complete block design (P ≤ 0.05). For some muscles, the ordering of V_max values was almost opposite to that of F_max values, generally indicating antigravity or dynamic functions, depending on the muscle and VMS. The muscles 3MT12, 3ML3 and 4ML4 exhibited high F_max and low V_max values, indicating a stabilising action. The very long 7MT4 and 8MT4 multifidus had low F_max and high V_max values, suggesting a shortening action. However, some functional characteristics of interest did not fall within these general observations, also indicating a dual action. In summary, the results of the analysis of various structural and functional parameters confirm the structural and functional heterogeneity of the equine thoracolumbar multifidus complex, depending on the VMS, regardless of the number of metameres crossing each fascicle. To clarify the functions of the equine multifidus muscle complex, this study aimed to assess its functional parameters in thoracolumbar VMSs with different movement characteristics and in the MDSM and LDSM muscles, hypothesising that the functional parameters vary significantly when the VMS is considered.

Biomechanical and histologic evaluation of the effects of underwater treadmill exercise on horses with experimentally induced osteoarthritis of the middle carpal joint

OBJECTIVE To evaluate the effects of exercise in an underwater treadmill (UWT) on forelimb biomechanics and articular histologic outcomes in horses with experimentally induced osteoarthritis of the middle carpal joint. ANIMALS 16 horses. PROCEDURES An osteochondral fragment was induced arthroscopically (day 0) in 1 middle carpal joint of each horse. Beginning on day 15, horses were assigned to exercise in a UWT or in the UWT without water (simulating controlled hand walking) at the same speed, frequency, and duration. Thoracic and pelvic limb ground reaction forces, thoracic limb kinematics, and electromyographic results for select thoracic limb muscles acting on the carpi were collected on days -7 (baseline), 14, 42, and 70. Weekly evaluations included clinical assessments of lameness, response to carpal joint flexion, and goniometric measurements of thoracic limb articulations. At study conclusion, articular cartilage and synovial membrane from the middle carpal joints was histologically examined. RESULTS Exercise in a UWT significantly reduced synovial membrane inflammation and resulted in significant clinical improvements with regard to symmetric thoracic limb loading, uniform activation patterns of select thoracic limb muscles, and return to baseline values for carpal joint flexion, compared with results for horses with simulated hand walking. CONCLUSIONS AND CLINICAL RELEVANCE Overall improvements in thoracic limb function, joint range of motion, and synovial membrane integrity indicated that exercise in a UWT was a potentially viable therapeutic option for the management of carpal joint osteoarthritis in horses.

Structural and functional characteristics of the thoracolumbar multifidus muscle in horses

The multifidus muscle fascicles of horses attach to vertebral spinous processes after crossing between one to six metameres. The fascicles within one or two metameres are difficult to distinguish in horses. A vertebral motion segment is anatomically formed by two adjacent vertebrae and the interposed soft tissue structures, and excessive mobility of a vertebral motion segment frequently causes osteoarthropathies in sport horses. The importance of the equine multifidus muscle as a vertebral motion segment stabilizer has been demonstrated; however, there is scant documentation of the structure and function of this muscle. By studying six sport horses postmortem, the normalized muscle fibre lengths of the the multifidus muscle attached to the thoracic (T)4, T9, T12, T17 and lumbar (L)3 vertebral motion segments were determined and the relative areas occupied by fibre types I, IIA and IIX were measured in the same muscles after immunohistochemical typying. The values for the normalized muscle fibre lengths and the relative areas were analysed as completely randomized blocks using an anova (P ≤ 0.05). The vertebral motion segments of the T4 vertebra include multifidus bundles extending between two and eight metameres; the vertebral motion segments of the T9, T12, T17 and L3 vertebrae contain fascicles extending between two and four metameres The muscle fibres with high normalized lengths that insert into the T4 (three and eight metameres) vertebral motion segment tend to have smaller physiological cross-sectional areas, indicating their diminished capacity to generate isometric force. In contrast, the significantly decreased normalized muscle fibre lengths and the increased physiological cross-sectional areas of the fascicles of three metameres with insertions on T9, T17, T12, L3 and the fascicles of four metameres with insertions on L3 increase their capacities to generate isometric muscle force and neutralize excessive movements of the vertebral segments with great mobility. There were no significant differences in the values of relative areas occupied by fibre types I, IIA and IIX. In considering the relative areas occupied by the fibre types in the multifidus muscle fascicles attached to each vertebral motion segment examined, the relative area occupied by the type I fibres was found to be significantly higher in the T4 vertebral motion segment than in the other segments. It can be concluded that the equine multifidus muscle in horses is an immunohistochemically homogeneous muscle with various architectural designs that have functional significance according to the vertebral motion segments considered. The results obtained in this study can serve as a basis for future research aimed at understanding the posture and dynamics of the equine spine.

Comparative locomotor costs of domestic dogs reveal energetic economy of wolf-like breeds

The broad diversity in morphology and geographic distribution of the 35 free-ranging members of the family Canidae is only rivaled by that of the domesticated dog, Canis lupus familiaris. Considered to be among nature's most elite endurance athletes, both domestic and wild canids provide a unique opportunity to examine the variability in mammalian aerobic exercise performance and energy expenditure. To determine the potential effects of domestication and selective breeding on locomotor gait and economy in canids, we measured the kinematics and mass-specific metabolism of three large (&gt;20 kg) dog breed groups (northern breeds, retrievers, and hounds) of varying morphological and genomic relatedness to their shared progenitor, the gray wolf. By measuring all individuals moving in preferred steady-state gaits along a level transect and on a treadmill, we found distinct biomechanical, kinematic, and energetic patterns for each breed group. While all groups exhibited reduced total cost of transport (COT) at faster speeds, the total COT and net COT during trotting and galloping were significantly lower for northern breed dogs (3.0 and 2.1 J∙kg−1∙m−1, respectively) relative to hound (4.2 and 3.4 J∙kg−1∙m−1, respectively) and retriever dogs (3.8 and 3.0 J∙kg−1∙m−1, respectively) of comparable mass. Similarly, northern breeds expended less energy per stride (3.47 J∙kg−1∙stride−1) than hounds or retrievers (4.97 and 4.02 J∙kg−1∙stride−1, respectively). These results suggest that, in addition to their close genetic and morphological ties to gray wolves, northern breed dogs have retained highly cursorial kinematic and physiological traits that promote economical movement across the landscape.

Adaptive functional specialisation of architectural design and fibre type characteristics in agonist shoulder flexor muscles of the llama, Lama glama

Like other camelids, llamas (Lama glama) have the natural ability to pace (moving ipsilateral limbs in near synchronicity). But unlike the Old World camelids (bactrian and dromedary camels), they are well adapted for pacing at slower or moderate speeds in high-altitude habitats, having been described as good climbers and used as pack animals for centuries. In order to gain insight into skeletal muscle design and to ascertain its relationship with the llama's characteristic locomotor behaviour, this study examined the correspondence between architecture and fibre types in two agonist muscles involved in shoulder flexion (M. teres major - TM and M. deltoideus, pars scapularis - DS and pars acromialis - DA). Architectural properties were found to be correlated with fibre-type characteristics both in DS (long fibres, low pinnation angle, fast-glycolytic fibre phenotype with abundant IIB fibres, small fibre size, reduced number of capillaries per fibre and low oxidative capacity) and in DA (short fibres, high pinnation angle, slow-oxidative fibre phenotype with numerous type I fibres, very sparse IIB fibres, and larger fibre size, abundant capillaries and high oxidative capacity). This correlation suggests a clear division of labour within the M. deltoideus of the llama, DS being involved in rapid flexion of the shoulder joint during the swing phase of the gait, and DA in joint stabilisation during the stance phase. However, the architectural design of the TM muscle (longer fibres and lower fibre pinnation angle) was not strictly matched with its fibre-type characteristics (very similar to those of the postural DA muscle). This unusual design suggests a dual function of the TM muscle both in active flexion of the shoulder and in passive support of the limb during the stance phase, pulling the forelimb to the trunk. This functional specialisation seems to be well suited to a quadruped species that needs to increase ipsilateral stability of the limb during the support phase of the pacing gait. Compared with other species, llama skeletal muscles are well suited for greater force generation combined with higher fatigue resistance during exercise. These characteristics are interpreted as being of high adaptive value, given the llama's habitat and its use as a pack animal.

Posture, gait and the ecological relevance of locomotor costs and energy-saving mechanisms in tetrapods

A reanalysis of locomotor data from functional, energetic, mechanical and ecological perspectives reveals that limb posture has major effects on limb biomechanics, energy-saving mechanisms and the costs of locomotion. Regressions of data coded by posture (crouched vs. erect) reveal nonlinear patterns in metabolic cost, limb muscle mass, effective mechanical advantage, and stride characteristics. In small crouched animals energy savings from spring and pendular mechanisms are inconsequential and thus the metabolic cost of locomotion is driven by muscle activation costs. Stride frequency appears to be the principal functional parameter related to the decreasing cost of locomotion in crouched animals. By contrast, the shift to erect limb postures invoked a series of correlated effects on the metabolic cost of locomotion: effective mechanical advantage increases, relative muscle masses decrease, metapodial limb segments elongate dramatically (as limbs shift from digitigrade to unguligrade designs) and biological springs increase in size and effectiveness. Each of these factors leads to decreases in the metabolic cost of locomotion in erect forms resulting from real and increasing contributions of pendular savings and spring savings. Comparisons of the relative costs and ecological relevance of different gaits reveal that running is cheaper than walking in smaller animals up to the size of dogs but running is more expensive than walking in horses. Animals do not necessarily use their cheapest gaits for their predominant locomotor activity. Therefore, locomotor costs are driven more by ecological relevance than by the need to optimize locomotor economy.

Functional specialisation of the pelvic limb of the hare (Lepus europeus)

We provide quantitative anatomical data on the muscle-tendon architecture of the hare pelvic limb (specifically muscle mass, fascicle length, pennation angle, tendon mass and length). In addition, moment arms of major pelvic limb muscles were measured. Maximum isometric force and power of muscles, the moment of force about a joint, and tendon stress and strain were estimated. Data are compared with published data for other cursorial mammals such as the horse and dog, and a non-specialised Lagamorph, the rabbit. The pelvic limb of the hare was found to contain substantial amounts of hip extensor and adductor/abductor muscle volume, which is likely to be required for power production and stability during rapid turning. A proximal to distal reduction in muscle volume and fascicle length was also observed, as is the case in other cursorial quadrupeds, along with a reduction in distal limb mass via the replacement of muscle volume by long distal limb tendons, capable of storing large amounts of elastic energy. The majority of hare pelvic limb muscle moment arms varied with joint position, giving the hare the capacity to vary muscle function with limb posture and presumably different locomotor activities.

Horse soleus muscle: postural sensor or vestigial structure?

The soleus muscle of horses is rather diminutive with respect to the overall size of adjacent synergist muscles in the hind limb of the horse. Whether or not such a muscle might be vestigial or may be providing some essential function has not been determined. We have studied the horse's soleus muscle using histochemical (ATPase), immunocytochemical (myosin isoform identification), and SDS-PAGE analysis to demonstrate that it is largely composed of 100% type I, presumed slow-twitch fibers. Only one soleus muscle studied (out of 13 adult horses) contained any type II muscle fibers. Given this consistent high percentage of slow-oxidative fibers, we hypothesized that the soleus muscle could have a significant role in proprioceptive function, essentially functioning as a proprioceptive organ instead of a significant force-generating muscle during locomotion. We tested this by examining three whole soleus muscles and assessing their muscle spindle content, which proved to have a spindle index of about 12. This value provided equivocal support for the hypothesis since it did not approach values reported for other mammalian proprioceptive muscles that were approximately 40-50 spindles per gram of muscle mass. Other parameters, such as motoneuron number and muscle unit size, may be useful in understanding these data.

Muscular design in the equine interosseus muscle

We studied the forelimb interosseus muscle in horses, Equus caballus, to determine the muscular properties inherent in its function. Some authors have speculated that the equine interosseus contains muscle fibers at birth only to undergo loss of these fibers through postnatal ontogeny. We describe the muscle fibers in eight interosseus specimens from adult horses. These fibers were studied histochemically using myosin ATPase studies and immunocytochemically using several antibodies directed against type I and type II myosin heavy chain antibodies. We determined that 95% of the fibers were type I, presumed slow-twitch fibers. All fibers exhibited normal morphological appearance in terms of fiber diameter and cross-sectional area, suggesting that the muscles are undergoing normal cycles of recruitment. SDS-PAGE studies of myosin heavy chain isoforms were consistent with these observations of primarily slow-twitch muscle. Fibers were determined to be approximately 800 microm long when studied using nitric acid digestion protocols. Short fiber length combined with high pinnation angles suggest that the interosseus muscle is able to generate large amounts of force but can produce little work (measured as pulling the distal tendon proximally). While the equine interosseus muscle has undergone a general reduction of muscle content during its evolution, it remains composed of a significant muscular component that likely contributes to forelimb stability and elastic storage of energy during locomotion.

Functional specialisation of pelvic limb anatomy in horses (Equus caballus)

We provide quantitative anatomical data on the muscle-tendon units of the equine pelvic limb. Specifically, we recorded muscle mass, fascicle length, pennation angle, tendon mass and tendon rest length. Physiological cross sectional area was then determined and maximum isometric force estimated. There was proximal-to-distal reduction in muscle volume and fascicle length. Proximal limb tendons were few and, where present, were relatively short. By contrast, distal limb tendons were numerous and long in comparison to mean muscle fascicle length, increasing potential for elastic energy storage. When compared with published data on thoracic limb muscles, proximal pelvic limb muscles were larger in volume and had shorter fascicles. Distal limb muscle architecture was similar in thoracic and pelvic limbs with the exception of flexor digitorum lateralis (lateral head of the deep digital flexor), the architecture of which was similar to that of the pelvic and thoracic limb superficial digital flexors, suggesting a functional similarity.

The role of the extrinsic thoracic limb muscles in equine locomotion

Muscles have two major roles in locomotion: to generate force and to absorb/generate power (do work). Economical force generation is achieved by short-fibred pennate muscle while the maximum power output of a muscle is architecture independent. In this study we tested the hypothesis that there is an anatomical and structural separation between the force-generating anti-gravity muscles and the propulsive (limb/trunk moving) muscles of the equine forelimb. Muscle mass and fascicle length measurements were made on the thoracic limb extrinsic muscles of six fresh horse cadavers. Physiological cross-sectional area and maximum isometric force were then estimated. Maximum power was estimated from muscle volume and published contraction velocity data. The majority of extrinsic forelimb muscles were large with long fascicles arranged in parallel to the long axis of the muscle. Muscles arranged in this way are optimised for doing work. The architecture of serratus ventralis thoracis (SVT) was unique. It had short (48 +/- 17 mm) fascicles, arranged at about 45 degrees to the long axis of the muscle, which would suggest a force-generating, anti-gravity role. The muscle belly of SVT was sandwiched between two broad, thick sheets of aponeurosis. Hence, SVT could make a significant contribution to the overall elastic properties of the thoracic limb.

The role of the extrinsic thoracic limb muscles in equine locomotion

Muscles have two major roles in locomotion: to generate force and to absorb/generate power (do work). Economical force generation is achieved by short-fibred pennate muscle while the maximum power output of a muscle is architecture independent. In this study we tested the hypothesis that there is an anatomical and structural separation between the force-generating anti-gravity muscles and the propulsive (limb/trunk moving) muscles of the equine forelimb. Muscle mass and fascicle length measurements were made on the thoracic limb extrinsic muscles of six fresh horse cadavers. Physiological cross-sectional area and maximum isometric force were then estimated. Maximum power was estimated from muscle volume and published contraction velocity data. The majority of extrinsic forelimb muscles were large with long fascicles arranged in parallel to the long axis of the muscle. Muscles arranged in this way are optimised for doing work. The architecture of serratus ventralis thoracis (SVT) was unique. It had short (48 +/- 17 mm) fascicles, arranged at about 45 degrees to the long axis of the muscle, which would suggest a force-generating, anti-gravity role. The muscle belly of SVT was sandwiched between two broad, thick sheets of aponeurosis. Hence, SVT could make a significant contribution to the overall elastic properties of the thoracic limb.

Neuromuscular partitioning, architectural design, and myosin fiber types of the M. vastus lateralis of the llama (Lama glama)

The llama (Lama glama) is one of the few mammals of relatively large body size in which three fast myosin heavy chain isoforms (i.e., IIA, IIX, IIB) are extensively expressed in their locomotory muscles. This study was designed to gain insight into the morphological and functional organization of skeletal musculature in this peculiar animal model. The neuromuscular partitioning, architectural design, and myosin fiber types were systematically studied in the M. vastus lateralis of adult llamas (n = 15). Four nonoverlapping neuromuscular partitions or compartments were identified macroscopically (using a modified Sihler's technique for muscle depigmentation), although they did not conform strictly to the definitions of "neuromuscular compartments." Each neuromuscular partition was innervated by primary branches of the femoral nerve and was arranged within the muscle as paired partitions, two in parallel (deep-superficial compartmentalization) and the other two in-series (proximo-distal compartmentalization). These neuromuscular partitions of the muscle varied in their respective architectural designs (studied after partial digestion with diluted nitric acid) and myosin fiber type characteristics (identified immunohistochemically with specific anti-myosin monoclonal antibodies, then examined by quantitative histochemistry and image analysis). The deep partitions of the muscle had longer fibers, with lower angles of pinnation, and higher percentages of fast-glycolytic fibers than the superficial partitions of the muscle. These differences clearly suggest a division of labor in the whole M. vastus lateralis of llamas, with deep partitions exhibiting features well adapted for dynamic activities in the extension of stifle, whereas superficial portions seem to be related to the antigravitational role of the muscle in preserving the extension of the stifle during standing and stance phase of the stride. This peculiar structural and functional organization of the llama M. vastus lateralis does not confirm the generalized idea that deep muscles or the deepest portions within the same muscles somehow develop postural and/or low-intensity isometric functions. Rather, it suggests a primacy of architecture over intramuscular location in determining fiber type composition and hence division of labor within the muscle. A compartmentalization in the distribution of the three fast-subtype fibers (IIA, IIX, and IIB) also occurred, and this could also be relevant functionally, since these fiber types differed significantly in size (IIA < IIX < IIB), oxidative capacity (IIA > IIX > IIB), and capillarization (IIA = IIX > IIB). Furthermore, a typical spatial pattern in fiber type distribution was encountered in llama muscle (i.e., fiber types were consistently ranked in the order I --> IIA --> IIX --> IIB from the center to the periphery of fascicles), suggesting again peculiar and not well understood functional adaptations in these species.

Determination of muscle architecture and fiber characteristics of the superficial and deep digital flexor muscles in the forelimbs of adult horses

OBJECTIVE

To provide a quantitative description of the architecture of superficial digital flexor (SDF) and deep digital flexor (DDF) muscles in adult horses to predict muscle-tendon behavior and estimate muscle forces.

SAMPLE POPULATION

7 forelimb specimens from 7 adult Thoroughbreds.

PROCEDURE

Muscle and tendon lengths and volumes were measured from 6 fixed forelimbs. After processing, fiber bundle and sarcomere lengths were measured. Optimal fascicle lengths and muscle length-to-fascicle length, muscle length-to-free tendon length, and fascicle length-to-tendon length ratios were calculated, as were tendon and muscle physiologic cross-sectional areas (PCSAs). Pennation angles were measured in 1 embalmed specimen.

RESULTS

The SDF optimal fascicle lengths were uniformly short (mean +/- SD, 0.8 +/- 0.1 cm), whereas DDF lengths ranged from 0.9 +/- 0.2 cm to 10.8 +/- 1.6 cm. The DDF humeral head had 3 architectural subunits, each receiving a separate median nerve branch, suggestive of neuromuscular compartmentalization. Pennation angles were small (10 degrees to 25 degrees). The PCSAs of the SDF and DDF muscle were 234 +/- 51 cm2 and 259 +/- 30 cm2, with estimated forces of 4,982 +/- 1148 N and 5,520 +/- 544 N, respectively.

CONCLUSIONS AND CLINICAL RELEVANCE

The SDF muscle appears to provide strong tendinous support with little muscle fascicular shortening and fatigue-resistance properties. The DDF muscle combines passive and dynamic functions with larger tension development and higher shortening velocities during digital motion. Architectural parameters are useful for estimation of forces and have implications for analysis of muscle-tendon function, surgical procedures involving muscle-tendon lengthening, and biomechanical modeling.

Architectural properties of distal forelimb muscles in horses, Equus caballus

Articular injuries in athletic horses are associated with large forces from ground impact and from muscular contraction. To accurately and noninvasively predict muscle and joint contact forces, a detailed model of musculoskeletal geometry and muscle architecture is required. Moreover, muscle architectural data can increase our understanding of the relationship between muscle structure and function in the equine distal forelimb. Muscle architectural data were collected from seven limbs obtained from five thoroughbred and thoroughbred-cross horses. Muscle belly rest length, tendon rest length, muscle volume, muscle fiber length, and pennation angle were measured for nine distal forelimb muscles. Physiological cross-sectional area (PCSA) was determined from muscle volume and muscle fiber length. The superficial and deep digital flexor muscles displayed markedly different muscle volumes (227 and 656 cm3, respectively), but their PCSAs were very similar due to a significant difference in muscle fiber length (i.e., the superficial digital flexor muscle had very short fibers, while those of the deep digital flexor muscle were relatively long). The ulnaris lateralis and flexor carpi ulnaris muscles had short fibers (17.4 and 18.3 mm, respectively). These actuators were strong (peak isometric force, Fmax=5,814 and 4,017 N, respectively) and stiff (tendon rest length to muscle fiber length, LT:LMF=5.3 and 2.1, respectively), and are probably well adapted to stabilizing the carpus during the stance phase of gait. In contrast, the flexor carpi radialis muscle displayed long fibers (89.7 mm), low peak isometric force (Fmax=555 N), and high stiffness (LT:LMF=1.6). Due to its long fibers and low Fmax, flexor carpi radialis appears to be better adapted to flexion and extension of the limb during the swing phase of gait than to stabilization of the carpus during stance. Including muscle architectural parameters in a musculoskeletal model of the equine distal forelimb may lead to more realistic estimates not only of the magnitudes of muscle forces, but also of the distribution of forces among the muscles crossing any given joint.

Force- and moment-generating capacities of muscles in the distal forelimb of the horse

A detailed musculoskeletal model of the distal equine forelimb was developed to study the influence of musculoskeletal geometry (i.e. muscle paths) and muscle physiology (i.e. force-length properties) on the force- and moment-generating capacities of muscles crossing the carpal and metacarpophalangeal joints. The distal forelimb skeleton was represented as a five degree-of-freedom kinematic linkage comprised of eight bones (humerus, radius and ulna combined, proximal carpus, distal carpus, metacarpus, proximal phalanx, intermediate phalanx and distal phalanx) and seven joints (elbow, radiocarpal, intercarpal, carpometacarpal, metacarpophalangeal (MCP), proximal interphalangeal (pastern) and distal interphalangeal (coffin)). Bone surfaces were reconstructed from computed tomography scans obtained from the left forelimb of a Thoroughbred horse. The model was actuated by nine muscle-tendon units. Each unit was represented as a three-element Hill-type muscle in series with an elastic tendon. Architectural parameters specifying the force-producing properties of each muscle-tendon unit were found by dissecting seven forelimbs from five Thoroughbred horses. Maximum isometric moments were calculated for a wide range of joint angles by fully activating the extensor and flexor muscles crossing the carpus and MCP joint. Peak isometric moments generated by the flexor muscles were an order of magnitude greater than those generated by the extensor muscles at both the carpus and the MCP joint. For each flexor muscle in the model, the shape of the maximum isometric joint moment-angle curve was dominated by the variation in muscle force. By contrast, the moment-angle curves for the muscles that extend the MCP joint were determined mainly by the variation in muscle moment arms. The suspensory and check ligaments contributed more than half of the total support moment developed about the MCP joint in the model. When combined with appropriate in vivo measurements of joint kinematics and ground-reaction forces, the model may be used to determine muscle-tendon and joint-reaction forces generated during gait.

Overview of horse body composition and muscle architecture: implications for performance

Locomotion requires skeletal muscle to sustain and generate force. A muscle's force potential is proportional to its weight. Since the larger the muscle the larger its potential power output, a better understanding of the proportion of skeletal muscle a horse possesses may lead to a better understanding of horse performance. Several techniques exist to assess body composition, which include dual energy X-ray absorption, underwater (hydrostatic) weighing, derivation from total body water, bio-electric impedance, air displacement, body condition scoring, cadaver dissection and ultrasound. The relevance of each method to the equine industry will be discussed as will the practical information that the existing horse body composition studies have provided. Attention will be given to the data regarding the implications of body composition on the performance horse. The limited number of studies discussing different varieties of muscle architectures and the functional importance of these muscles will also be addressed. These body composition data may provide a better understanding of important issues in horse care that can lead to more optimal horse care techniques and a healthier and safer environment for horses.

Complex three-dimensional patterns of myosin isoform expression: differences between and within specific extraocular muscles

Because complex structural differences in adult extraocular muscles may have physiological and pathophysiological significance, the three-dimensional pattern of myosin heavy chain (MHC) isoform expression within the orbital and global layers of the muscle bellies compared with the distal tendon ends was quantitatively assessed. Three of the six extraocular muscles of adult rabbits were examined for immunohistologic expression of all fast, fast IIA/X, slow, neonatal and developmental MHC isoforms. The percentages of myofibers positive for each of these 5 myosin isoforms were determined in the orbital and global layers. There were relatively similar patterns of fast and slow MHC expression in the orbital and global layers of each of the three muscles examined. There were high levels of developmental MHC in the orbital layers, but significantly fewer developmental MHC positive myofibers in the global layer. The most variable expression was found with the neonatal MHC. There were significant differences between the longitudinal expression of the various isoforms in the middle of each muscle compared with the tendon end. In the orbital layer of all three muscles examined, the large numbers of fibers positive for fast MHC in the middle of the muscle dramatically decreased at the tendon end, with a concomitant increase in expression of slow myosin. There was a greater number of developmental MHC-positive myofibers at the tendon end than in the middle of the muscle in all three muscles examined. In the global layer, the IIA/X-positive myofibers comprised only half of the total number of fast-positive myofibers whereas in the orbital layer they comprised all or almost all of the fast positive myofibers. The configuration of the extraocular muscles is more complex than might be indicated by previous studies. The lateral rectus muscle had the most individual pattern of MHC expression when compared with the inferior rectus and inferior oblique muscles. Together with dramatic cross-sectional MHC fiber type differences between the orbital and global layers of the muscles, there are pronounced longitudinal differences in the proportions of myofibers expressing these five MHC isoforms in the middle region of the muscles and those in the distal tendon ends. This longitudinal progression appears to occur both within single myofibers, as well as within the series of myofibers that comprise the length of the muscle. We also confirm that the number of myofibers is reduced at the tendonous end while the cross-sectional area of each of the remaining myofibers is proportionally increased with regard to those in the muscle belly. Future studies may yet require two additional schemes for anatomic classification of the named extraocular muscles. One will be based on immunohistochemical features of their constituent myofibers as a supplement to classifications based on their electron microscopic appearance, innervation patterns or relative position with regard to the globe and orbit. Another will be based on the proportional length and longitudinal position of individual myofibers within an individual extraocular muscle.