Bacterial synthesis of copper/copper oxide nanoparticles

A comparative study of the biosynthesis of CuNPs by Niallia circulans G9 and Paenibacillus sp. S4c strains: characterization and application as antimicrobial agents

BACKGROUND

Biosynthesis of metallic nanoparticles using microorganisms are a fabulous and emerging eco-friendly science with well-defined sizes, shapes and controlled monodispersity. Copper nanoparticles, among other metal particles, have sparked increased attention due to their applications in electronics, optics, catalysis, and antimicrobial agents.

RESULTS

This investigation explains the biosynthesis and characterization of copper nanoparticles from soil strains, Niallia circulans G9 and Paenibacillus sp. S4c by an eco-friendly method. The maximum reduction of copper ions and maximum synthesis CuNPs was provided by these strains. Biogenic formation of CuNPs have been characterized by UV-visible absorption spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray analysis and transmission electron microscopy analysis. Using UV-visible spectrum scanning, the synthesised CuNPs' SPR spectra showed maximum absorption peaks at λ304&308 nm. TEM investigation of the produced CuNPs revealed the development of spherical/hexagonal nanoparticles with a size range of 13-100 nm by the G9 strain and spherical nanoparticles with a size range of 5-40 nm by the S4c strain. Functional groups and chemical composition of CuONPs were also confirmed. The antimicrobial activity of the biosynthesized CuNPs were investigated against some human pathogens. CuNPs produced from the G9 strain had the highest activity against Candida albicans ATCC 10,231 and the lowest against Pseudomonas aeruginosa ATCC 9027. CuNPs from the S4c strain demonstrated the highest activity against Escherichia coli ATCC 10,231 and the lowest activity against Klebsiella pneumonia ATCC 13,883.

CONCLUSION

The present work focused on increasing the CuNPs production by two isolates, Niallia circulans G9 and Paenibacillus sp. S4c, which were then characterized alongside. The used analytics and chemical composition techniques validated the existence of CuONPs in the G9 and S4c biosynthesized nano cupper. CuNPs of S4c are smaller and have a more varied shape than those of G9 strain, according to TEM images. In terms of antibacterial activity, the biosynthesized CuNPs from G9 and S4c were found to be more effective against Candida albicans ATCC 10,231 and E. coli ATCC 10,231, respectively.

Promising biomedical systems based on copper nanoparticles: Synthesis, characterization, and applications

Copper and copper oxide nanoparticles (CuNPs) have unique physicochemical properties that make them highly promising for biomedical applications. This review discusses the application of CuNPs in biomedicine, including diagnosis, therapy, and theranostics. Recent synthesis methods, with an emphasis on green approaches, are described, and the latest techniques for nanoparticle characterization are critically analyzed. CuNPs, including Cu2O, CuO, and Cu, have significant potential as anti-cancer agents, drug delivery systems, and photodynamic therapy enhancers, among other applications. While challenges such as ensuring biocompatibility and stability must be addressed, the state-of-the-art research reviewed here provides strong evidence for the efficacy and versatility of CuNPs. These multifunctional properties have been extensively researched and documented, showcasing the immense potential of CuNPs in biomedicine. Overall, the evidence suggests that CuNPs are a promising avenue for future research and development in biomedicine. We strongly support further progress in the development of synthesis and application strategies to enhance the effectiveness and safety of CuNPs for clinical purposes.

Green and cost-effective biofabrication of copper oxide nanoparticles: Exploring antimicrobial and anticancer applications

Nanotechnology has made remarkable advancements in recent years, revolutionizing various scientific fields, industries, and research institutions through the utilization of metal and metal oxide nanoparticles. Among these nanoparticles, copper oxide nanoparticles (CuO NPs) have garnered significant attention due to their versatile properties and wide-range applications, particularly, as effective antimicrobial and anticancer agents. CuO NPs can be synthesized using different methods, including physical, chemical, and biological approaches. However, conventional chemical and physical approaches are expensive, resource-intensive, and involve the use of hazardous chemicals, which can pose risks to human health and the environment. In contrast, biological synthesis provides a sustainable and cost-effective alternative by eliminating chemical pollutants and allowing for the production of CuO NPs of tailored sizes and shapes. This comprehensive review focused on the green synthesis of CuO NPs using various biological resources, such as plants, microorganisms, and other biological derivatives. Current knowledge and recent trends in green synthesis methods for CuO NPs are discussed, with a specific emphasis on their biomedical applications, particularly in combating cancer and microbial infections. This review highlights the significant potential of CuO NPs in addressing these diseases. By capitalizing on the advantages of biological synthesis, such as environmental safety and the ability to customize nanoparticle characteristics, CuO NPs have emerged as promising therapeutic agents for a wide range of conditions. This review presents compelling findings, demonstrating the remarkable achievements of biologically synthesized CuO NPs as novel therapeutic agents. Their unique properties and mechanisms enable effective combating against cancer cells and various harmful microbial infections. CuO NPs exhibit potent anticancer activity through diverse mechanisms, including induction of apoptosis, inhibition of angiogenesis, and modulation of signaling pathways. Additionally, their antimicrobial activity manifests through various mechanisms, such as disrupting microbial membranes, generating reactive oxygen species, and interfering with microbial enzymes. This review offers valuable insights into the substantial potential of biologically synthesized CuO NPs as an innovative approach for future therapeutic interventions against cancer and microbial infections.

A State-of-the-Art Systemic Review on Selenium Nanoparticles: Mechanisms and Factors Influencing Biogenesis and Its Potential Applications

Selenium is a trace element required for the active function of numerous enzymes and various physiological processes. In recent years, selenium nanoparticles draw the attention of scientists and researchers because of its multifaceted uses. The process involved in chemically synthesized SeNPs has been found to be hazardous in nature, which has paved the way for safe and ecofriendly SeNPs to be developed in order to achieve sustainability. In comparison to chemical synthesis, SeNPs can be synthesized more safely and with greater flexibility utilizing bacteria, fungi, and plants. This review focused on the synthesis of SeNPs utilizing bacteria, fungi, and plants; the mechanisms involved in SeNP synthesis; and the effect of various abiotic factors on SeNP synthesis and morphological characteristics. This article discusses the synergies of SeNP synthesis via biological routes, which can help future researchers to synthesize SeNPs with more precision and employ them in desired fields.

Biogenic copper oxide nanoparticles from Bacillus coagulans induced reactive oxygen species generation and apoptotic and anti-metastatic activities in breast cancer cells

The present study examined the anticancer capabilities of Bacillus coagulans supernatant-produced copper oxide nanoparticles (BC-CuONPs) on MCF-7 and SKBR3 cancer cells. The X-ray diffraction, ultraviolet-visible spectroscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, field-emission scanning electron microscopy, energy-dispersive X-ray, dynamic light scattering, and zeta potential techniques were used to characterize BC-CuONPs. This study also investigated the cellular and molecular processes of NPs' anti-proliferative and apoptotic properties on human breast cancer cells and compared them to the commercial pharmaceutical tamoxifen. The size of the spherical NP was from 5 to 47 nm with negative zeta potential. The MTT results showed the great cytotoxic effect of BC-CuONPs against breast cancer cells. The BC-CuONPs inhibited the growth of breast cancer cells in a time- and dose-dependent manner. The up-regulation of BCL2-associated X (BAX), cyclin dependent kinase inhibitor 1A (P21), Caspase 3 (CASP3), and Caspase 9 (CASP9), the down-regulation of BCL2 apoptosis regulator (BCL2), Annexin V-FITC/propidium iodide, and reactive oxygen species (ROS) generation results suggested that BC-CuONPs had a significant apoptotic impact when compared to the control. Scratch tests and vascular endothelial growth factor receptor gene (VEGF) down-regulation demonstrated that BC-CuONPs had anti-metastatic activity. The cell cycle analysis and down-regulation of Cyclin D1 (CCND1) and cyclin dependent kinase 4 (CDK4) revealed that cancer cells were arrested in the sub-G1 phase. Finally, the results showed that the secondary metabolites in the supernatant of Bacillus coagulans could form CuONPs, and biogenic BC-CuONPs showed anti-metastasis and anticancer properties on breast cancer cells while having less adverse effects on normal cells. Therefore, the synthesized CuONPs using B. coagulans supernatant can be shown as a potential candidate for a new therapeutic strategy in cancer management.

Biosynthesized metal oxide nanoparticles for sustainable agriculture: next-generation nanotechnology for crop production, protection and management

The current agricultural sector is not only in its most vulnerable state but is also becoming a threat to our environment due to expanding population and growing food demands along with worsening climatic conditions. In addition, numerous agrochemicals presently being used as fertilizers and pesticides have low efficiency and high toxicity. However, the rapid growth of nanotechnology has shown great promise to tackle these issues replacing conventional agriculture industries. Since the last decade, nanomaterials especially metal oxide nanoparticles (MONPs) have been attractive for improving agricultural outcomes due to their large surface area, higher chemical/thermal stability and tunable unique physicochemical characteristics. Further, to achieve sustainability, researchers have been extensively working on ecological and cost-effective biological approaches to synthesize MONPs. Hereby, we have elaborated on recent successful biosynthesis methods using various plants/microbes. Furthermore, we have elucidated different mechanisms for the interaction of MONPs with plants, including their uptake/translocation/internalization, photosynthesis, antioxidant activity, and gene alteration, which could revolutionize crop productivity/yield through increased nutrient amount, photosynthesis rate, antioxidative enzyme level, and gene upregulations. Besides, we have briefly discussed about functionalization of MONPs and their application in agricultural-waste-management. We have further illuminated recent developments of various MONPs (Fe₂O₃/ZnO/CuO/Al₂O₃/TiO₂/MnO₂) as nanofertilizers, nanopesticides and antimicrobial agents and their implications for enhanced plant growth and pest/disease management. Moreover, the potential use of MONPs as nanobiosensors for detecting nutrients/pathogens/toxins and safeguarding plant/soil health is also illuminated. Overall, this review attempts to provide a clear insight into the latest advances in biosynthesized MONPs for sustainable crop production, protection and management and their scope in the upcoming future of eco-friendly agricultural nanotechnology.

Evaluation of Zebrafish Toxicology and Biomedical Potential of Aeromonas hydrophila Mediated Copper Sulfide Nanoparticles

The present study deals with extracellular synthesis and characterization of copper sulfide (CuS) nanoparticles using Aeromonas hydrophila, and the biological applications of the synthesized CuS like antibacterial, anti-inflammatory, and antioxidant activity were reported. Further, the toxicological effects of the CuS were evaluated using zebrafish as an animal model. The primary step of the synthesis was carried out by adding the precursor copper sulfates to the culture supernatant of Aeromonas hydrophila. The UV-visible spectrophotometer was used to characterize the synthesized nanoparticles, and the peak was obtained at 307 nm through the reduction process. Fourier transform infrared spectroscopy (FTIR) was involved to find out the functional groups (carboxylic acid, alcohols, alkanes, and nitro compounds) associated with copper sulfide nanoparticles (CuS-NPs). Atomic force microscopy (AFM) was used to characterize the CuS topographically, and a scanning electron microscope (SEM) revealed about 200 nm sized CuS nanoparticles with agglomerated structures. Overall, the characterized nanoparticles can be considered as a potential candidate with therapeutic proficiencies as antibacterial, antioxidant, and anti-inflammatory mediator/agents.

Green Synthesis and Characterization of Copper Nanoparticles Using Fortunella margarita Leaves

The use of biomaterials in the synthesis of nanoparticles is one of the most up-to-date focuses in modern nanotechnologies and nanosciences. More and more research on green methods of producing metal oxide nanoparticles (NP) is taking place, with the goal to overcome the possible dangers of toxic chemicals for a safe and innocuous environment. In this study, we synthesized copper nanoparticles (CuNPs) using Fortunella margarita leaves' extract, which reflects its novelty in the field of nanosciences. The visual observation of a color change from dark green to bluish green clearly shows the instant and spontaneous formation of CuNPs when the phytochemicals of F. margarita come in contact with Cu+2 ions. The synthesis of CuNPs was carried out at different conditions, including pH, temperature, concentration ratio and time, and were characterized with UV-Vis absorption spectra, scanning electron microscope (SEM) and X-ray diffraction (XRD). The UV-Vis analysis reveals the surface plasmon resonance property (SPR) of CuNPs, showing a characteristic absorption peak at 679 nm, while SEM reveals the spherical but agglomerated shape of CuNPs of the size within the range of 51.26-56.66 nm.

Production of Zinc and Copper as Nanoparticles by Green Synthesis Using Pseudomonas fluorescens

<b>Background and Objective:</b> Nanoparticles with a little size to an enormous surface (1-100 nm) have expected clinical, mechanical and agricultural applications. This study aimed to produce nano Zinc Oxide (ZnO) and nano Copper Oxide (CuO) particles by green synthesis. <b>Materials and Methods:</b> Two strains of <i>Pseudomonas fluorescens</i> i.e., PSI and PSII, both cell culture supernatants and cell pellets from the two strains were examined separately in CuSO<sub>4</sub> or ZnSO<sub>4</sub> solutions. The supernatants from both strains produced color changes in both solutions referring to the formation of nano CuO or ZnO particles. The solutions were examined for nano-particle characteristics using UV-spectroscopy, particle size and morphology were tested using a scanning electron microscope and transmission electron microscopy. <b>Results:</b> UV-Vis absorption spectrum of solutions at a wavelength range 200-800 nm exhibits a distinct absorption peak in the region of 238-331 and at 303-366 nm for CuO or ZnO NPs, respectively. Absorption bands and the characteristic Surface Plasmon Resonance (SPR) spectra confirm the existence of CuO and ZnO NPs. SEM analysis micrographs indicated that CuO NPs were formed as spherical particles, while the exact shape of ZnO NPs could be identified as oval aggregates. <b>Conclusion:</b> Changes of color occurred in both solutions of two strains referring to the formation of nano CuO or ZnO particles.

Plant-Based Biosynthesis of Copper/Copper Oxide Nanoparticles: An Update on Their Applications in Biomedicine, Mechanisms, and Toxicity

Plants are rich in phytoconstituent biomolecules that served as a good source of medicine. More recently, they have been employed in synthesizing metal/metal oxide nanoparticles (NPs) due to their capping and reducing properties. This green synthesis approach is environmentally friendly and allows the production of the desired NPs in different sizes and shapes by manipulating parameters during the synthesis process. The most commonly used metals and oxides are gold (Au), silver (Ag), and copper (Cu). Among these, Cu is a relatively low-cost metal that is more cost-effective than Au and Ag. In this review, we present an overview and current update of plant-mediated Cu/copper oxide (CuO) NPs, including their synthesis, medicinal applications, and mechanisms. Furthermore, the toxic effects of these NPs and their efficacy compared to commercial NPs are reviewed. This review provides an insight into the potential of developing plant-based Cu/CuO NPs as a therapeutic agent for various diseases in the future.

Myco-Fabrication of Copper Nanoparticles and Its Effect on Crop Pathogenic Fungi

Phytopathogens are responsible for huge losses in the agriculture sector. Amongst them, fungal phytopathogen is quite difficult to control. Many chemicals are available in the market, claiming the high activity against them. However, the development of resistance by the fungal pathogen is the main concern to overcome their menace. Nanotechnology-based products can be a potential alternative to conventional fungicides. Amongst various nanoparticles, Copper nanoparticles (CuNPs) are appearing to be a promising antifungal candidate. It can be synthesized by various methods, but the myco-fabrication appears to be an environmental-friendly approach. Hence, the present study is an attempt to synthesize CuNPs using Aspergillus flavus. The myco-fabricated CuNPs were characterized by UV spectrophotometer, Fourier transform infrared spectroscopy (FTIR), Nanoparticles tracking and analysis system (NTA), Transmission Electron Microscopy (TEM), X-ray diffraction (XRD) and Zeta potential measurement. Myco-fabricated CuNPs showed maximum absorbance at 602 nm and particle size ranging 5-12 nm with the least average size of 8 nm with spherical shape and moderate stability. Myco-fabricated CuNPs tested against selected fungal crop pathogens viz. Aspergillus niger, Fusariumoxysporum, and Alternaria alternata reveal a significant effect. Besides these we have given the hypothetical mechanism depicting the antifungal action of myco-fabricated CuNPs.

Green and Traditional Synthesis of Copper Oxide Nanoparticles-Comparative Study

The current study compared the synthesis, characterization and properties of copper oxide nanoparticles (CuO) based on green and traditional chemical methods. The synthesized CuO were confirmed by spectroscopic and morphological characterization such as ultraviolet-visible (UV-vis) spectroscopy, fourier transform infrared (FTIR) spectroscopy, zeta potential, scanning electron microscopy (SEM) and energy dispersed X-ray (EDX). Electrochemical behavior of the modified electrodes was done using cyclic voltammetry (CV) in ferricyanide/ferrocyanide ([Fe(CN)6]4-/[Fe(CN)6]3-) redox probe. As revealed by UV spectrophotometer, the absorption peaks ranged from 290-293 nm for all synthesized nanoparticles. Based on SEM images, CuO were spherical in shape with agglomerated particles. Zeta potential revealed that the green CuO have more negative surface charge than the chemically synthesized CuO. The potential of the green synthesized nanoparticles was higher relative to the chemically synthesized one. Cyclic voltammetry studies indicated that the traditional chemically synthesized CuO and the green CuO have electrocatalytic activity towards the ferricyanide redox probe. This suggests that the green CuO can be modified with other nanomaterials for the preparation of electrochemical sensors towards analytes of interest.

Green synthesis of copper oxide nanoparticles for biomedical application and environmental remediation

Recent development in nanoscience and nanotechnology has contributed to the wide applications of metal and metal oxides nanoparticles in several field of sciences, research institutes and industries. Among all metal oxides, copper oxide nanoparticles (CuONPs) has gained more attention due to its distinctive properties and applications. The high cost of reagents, equipment and environmental hazards associated with the physical and chemical methods of synthesizing CuONPs has been a major setback. In order to puffer solution to the aforementioned challenges by reducing environmental pollution and production of cheaper nanoparticles with good properties and efficiency, this review focus on collection of comprehensive information from recent developments in the synthesis, characterization and applications from previous scientific findings on biological method of synthesizing CuONPs due to the acclaimed advantages of been cheap, environmentally friendly, convenient and possibility of been scale up in into large scale production reported by numerous researchers. Our finding also support the synthesis of CuONPs from plant sources due to relative abundance of plants for the production of reducing and stabilizing agents required for CuONPs synthesis, potential efficiency of plant biomolecules in enhancing the toxicity effect of CuONPs against microbes, prevention of environmental pollution due of nontoxic chemicals and degradation effectiveness of CuONPs synthesized from plant sources. Furthermore, this study provide useful information on the rapid synthesis of CuONPs with desired properties from plant extracts.

Synthesis of Metal Nanoparticles by Microorganisms

Metal nanoparticles (NPs), with sizes ranging from 1–100 nm, are of great scientific interest because their functions and features differ greatly from those of bulk metal. Chemical or physical methods are used to synthesize commercial quantities of NPs, and green, energy-efficient approaches generating byproducts of low toxicity are desirable to minimize the environmental impact of the industrial methods. Some microorganisms synthesize metal NPs for detoxification and metabolic reasons at room temperature and pressure in aqueous solution. Metal NPs have been prepared via green methods by incubating microorganisms or cell-free extracts of microorganisms with dissolved metal ions for hours or days. Metal NPs are analyzed using various techniques, such as ultraviolet-visible spectroscopy, electron microscopy, X-ray diffraction, electron diffraction, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Numerous publications have focused on microorganisms that synthesize various metal NPs. For example, Ag, Au, CdS, CdSe, Cu, CuO, Gd2O3, Fe3O4, PbS, Pd, Sb2O3, TiO2, and ZrO2 NPs have been reported. Herein, we review the synthesis of metal NPs by microorganisms. Although the molecular mechanisms of their synthesis have been investigated to some extent, experimental evidence for the mechanisms is limited. Understanding the mechanisms is crucial for industrial-scale development of microorganism-synthesized metal NPs.

Maodaa S, Allam AA, Elshaer N. Ecofriendly Synthesis and Insecticidal Application of Copper Nanoparticles against the Storage Pest Tribolium castaneum

In spite of great developments in the agricultural field and plant productivity in the last decades, the concern about the control of agricultural pests is still continuous. However, pest management is expected to have more effects from nanomaterials by providing innovative solutions. The current study confirms the biotransformation of copper nanoparticles (CuNPs) using a cell-free culture extract of metal copper-resistant bacteria Pseudomonas fluorescens MAL2, which was isolated from heavy metal-contaminated soils collected from Sharqia Governorate, Egypt. The local screened bacterial isolate, Pseudomonas fluorescens MAL2, is similar to Pseudomonas fluorescens DSM 12442T DSM. After optimization of growth conditions, F-Base medium was found to be the best medium and pH 7, temperature 35 °C, concentration of CuSO4·5H2O 300 ppm, 10 mL supernatant: 40 mL CuSO4·5H2O (300 ppm), and reaction time 90 min were recorded as the best growth conditions to the fabrication of CuNPs. The formed CuNPs were characterized using initially visual observation of the change in the color of the reaction mixture from blue color to the dark green as an indication of CuNPs biotransformation. Then, UV-Vis spectroscopy showed a maximum absorption at 610 nm under the optimum conditions performed. Transmission Electron Microscopy (TEM) revealed the formation of spherical aspect with size ranges from 10:70 nm; moreover, Energy Dispersive X-ray spectroscopy (EDX) indicated the presence of CuNPs and other elements. In addition, the presence of alcohols, phenols, alkenes, and amines is confirmed by Fourier-Transform Infrared spectroscopy (FTIR) spectroscopy analysis. Dynamic Light Scattering (DLS) supported that the Zeta-average size of nanoparticle was 48.07 with 0.227 PdI value. The Zeta potential showed -26.00mV with a single peak. The biosynthesized CuNPs (Bio CuNPs) showed toxicity against the stored grain pest (Tribolium castaneum), where LC50 value was 37 ppm after 5 days of treatment. However, the negligible effect was observed with chemical synthesis of CuNPs (Ch CuNPs) at the same concentration. The results suggest that Bio CuNPs could be used not only as a biocontrol agent, but also as an ecofriendly and inexpensive approach for controlling the stored grain pests.

Multifunctional CuO nanoparticles with cytotoxic effects on KYSE30 esophageal cancer cells, antimicrobial and heavy metal sensing activities

In this work, fluorescent copper oxide nanoparticles (CuO NPs) were green synthesized using viable cells, cell lysate supernatant (CLS) and protein extracts of luminescent Vibrio sp. VLC. Biogenic CuO NPs were then characterized by XRD, FTIR, UV/Vis spectroscopy, TEM, DLS, and PL spectroscopy. Results showed that CLS method was more efficient for CuO NPs production, therefore CuO NPs synthesized by this method from copper sulfate (CuO NPs-1) and/or copper nitrate (CuO NPs-2) were used for further studies. The crystallite size of polydispersed CuO NPs-1 and CuO NPs-2 were about 8.83 and 8.77 nm, respectively indicating their suitability for biological applications. Antibacterial activity of CuO NPs was determined using broth microdilution, well diffusion agar, and time-kill curves methods. Both CuO NP-1 and CuO NP-2 inhibited bacterial growth at the minimum inhibitory concentration (MIC) of 625 mg/L except St. mutants (MIC = 1250 mg/L). Emission of fluorescent light from the surface of NPs was increased when exposed to Cd²⁺, As²⁺ and Hg²⁺ ions but decreased by Pb²⁺ ions. Results showed that CuO NP-1 had anticancer properties against KYSE30 esophageal cancer cell line (IC₅₀ = 13.96 mg/L) while no higher cytotoxic effects were observed on Human Dermal Fibroblasts (HDF) (IC₅₀ = 48.88 mg/L).

Biosynthesis, Characterization of Some Combined Nanoparticles, and Its Biocide Potency against a Broad Spectrum of Pathogens

The development of environmentally benign procedures for the synthesis of metallic nanoparticles (NPs) is a vital aspect in bionanotechnology applications for health care and the environment. This study describes the biosynthesis of Ag, Co, Ni, and Zn NPs by employing nanobiofactory Proteus mirabilis strain 10B. The physicochemical characterization UV-visible spectroscopy, scanning electron microscopy-energy-dispersive X-ray microanalysis (EDX), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS) technique including ζ potential, and polydispersity index (PDI) confirmed the formation of pure, stable monodisperse quasi-spherical oxide NPs of corresponding metals. The antimicrobial activity of biofabricated NPs was assessed against Gram-negative and Gram-positive bacteria, biofilm, yeast, mold, and algae via a well diffusion method. The results displayed significant antagonistic activity in comparison to their bulk and commercial antibiotics. Interestingly, the combined NPs exhibited promising synergistic biocide efficiency against examined pathogens which encourages their applications in adjuvant therapy and water/wastewater purification for controlling multiple drug-resistant microorganisms. To the best of our knowledge, no previous study reported the synthesis of semiconductor NPs by Proteus mirabilis and the biocide potency of combined NPs against a broad spectrum of pathogens not reported previously.

Synthesis and Catalytic and Biological Activities of Silver and Copper Nanoparticles Using Cassia occidentalis

An ecofriendly and green method for the synthesis of silver and copper nanoparticles has developed using aqueous leaves extract of Cassia occidentalis. The formation of AgNPs and CuNPs was monitored by measuring the UV-Vis spectra. The morphology and crystalline phase of the metal nanoparticles were determined using transmission electron microscopy (TEM) and scanning electron microscopy (SEM) with X-ray energy dispersive spectrophotometer (EDX) and X-ray diffraction (XRD). The synthesized metal nanoparticles were generally found to be spherical and oval in shape. The AgNPs and CuNPs showed highly potent antibacterial activity against Escherichia coli and Salmonella typhi bacteria, respectively. The CuNPs showed higher radical scavenging activity than AgNPs. The AgNPs showed lower haemolysis (1.7%) exhibiting lesser toxicity as compared to CuNPs. The CuNPs have better catalytic ability for the reduction of 4-nitrophenol and 2-nitrophenol as compared to AgNPs.

Biosynthesis of TiO2 and ZnO nanoparticles by Halomonas elongata IBRC-M 10214 in different conditions of medium

Introduction: In the recent years, green synthesis is a novel method without some disadvantages of physical and chemical methods. In this approach, bacteria, archaebacteria, fungi, and plants may be applied without utilizing toxic and expensive materials for metal nanoparticles (MNPs) preparation. Methods: In this study, we used Taguchi method to obtain optimum conditions in titanium dioxide and zinc oxide nanoparticle (NPs) biosynthesis by Halomonas elongata IBRC-M 10214. Design and analysis of Taguchi experiments (an orthogonal assay and analysis of variance [ANOVA]) carried out by the Qualitek-4 software. Effects of TiO(OH)2, incubation temperature, and culturing time for synthesis of TiO2 NPs as well as ZnCl2 concentration, glucose concentration, and incubation temperature for the preparation of ZnO NPs were evaluated as the controllable factors with 3 levels. Characterization of TiO2 and ZnO NPs were determined by UV-Vis spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and dynamic light scattering (DLS) analysis. Also, the antimicrobial properties of these NPs were investigated based on agar diffusion assay of NPs dispersed in batch cultures using Escherichia coli ATCC 25922 and Staphylococcus aureus ATCC 43300 as multidrug-resistant (MDR) bacteria. Results: It was evaluated that TiO2 and ZnO NPs had respectively average diameter sizes of 104.63±27.75 and 18.11±8.93 nm with spherical shapes. In contrast to the TiO2 NPs without antibacterial activity, the ZnO NPs had antibacterial effects at 0.1 and 0.01 M of (ZnCl2). Conclusion: The ZnO NPs have the antibacterial effect that can be operative in the medicinal aspect for fighting against prominent MDR bacteria such as E. coli ATCC 25922 and S. aureus ATCC 43300. In total, this study presents a simple method in the biosynthesis of TiO2 and ZnO NPs with low the expense, eco-friendly, and high productivity properties.

Advances in microbial biosynthesis of metal nanoparticles

Metal nanoparticles are garnering considerable attention owing to their high potential for use in various applications in the material, electronics, and energy industries. Recent research efforts have focused on the biosynthesis of metal nanomaterials using microorganisms rather than traditional chemical synthesis methods. Microorganisms have evolved to possess molecular machineries for detoxifying heavy metals, mainly by employing metal-binding proteins and peptides. Biosynthesis of diverse metal nanoparticles has recently been demonstrated using such heavy metal detoxification systems in microorganisms, which provides several advantages over the traditional chemical synthesis methods. First, metal nanoparticles can be synthesized at mild temperatures, such as at room temperature, with less energy input. Second, no toxic chemicals or reagents are needed, and thus the process is environmentally friendly. Third, diverse metal nanoparticles, including those that have never been chemically synthesized, can be biosynthesized. Here, we review the strategies for the biosynthesis of metal nanoparticles using microorganisms, and provide future prospects.

Comparative study of MnO2 nanoparticle synthesis by marine bacterium Saccharophagus degradans and yeast Saccharomyces cerevisiae

Microorganisms are one of the most attractive and simple sources for the synthesis of different types of metal nanoparticles. The synthesis of manganese dioxide nanoparticles (MnO2 NPs) by microorganisms from reducing potassium permanganate was investigated for the first time in the present study. The microbial supernatants of the bacterium Saccharophagus degradans ATCC 43961 (Sde 2-40) and of the yeast Saccharomyces cerevisiae showed positive reactions to the synthesis of MnO2 NPs by displaying a change of color in the permanganate solution from purple to yellow. KMnO4-specific peaks also disappeared and MnO2-specific peaks emerged at an absorption maximum of 365 nm in UV-visible spectrophotometry. The washed Sde 2-40 cells did not show any ability to synthesize MnO2 NPs. The medium and medium constituents of Sde 2-40 showed similar positive reactions as supernatants, which indicate the role of the Sde 2-40 medium constituents in the synthesis of MnO2 NPs. This suggests that microorganisms without nanoparticle synthesis ability can be misreported for their abilities to synthesize nanoparticles. S. cerevisiae washed cells showed an ability to synthesize MnO2 NPs. The strategies of keeping yeast cells in tea bags and dialysis membranes showed positive tests for the synthesis of MnO2 NPs. A Fourier transform-infrared spectroscopy study suggested roles for the proteins, alcoholic compounds, and cell walls of S. cerevisiae cells in the synthesis of MnO2 NPs. Electron-dispersive X-ray spectroscopy analyses confirmed the presence of Mn and O in the sample. X-ray photoelectron spectroscopy revealed characteristic binding energies for MnO2 NPs. Transmission electron microscopy micrographs revealed the presence of uniformly dispersed hexagonal- and spherical-shaped particles with an average size of 34.4 nm. The synthesis approach using yeast is possible by a simple reaction at low temperature without any need for catalysts, templates, or expensive and precise equipment. Therefore, this study will be useful for the easy, cost-effective, reliable, and eco-friendly production of nanomaterials.

Intracellular biosynthesis and removal of copper nanoparticles by dead biomass of yeast isolated from the wastewater of a mine in the Brazilian Amazonia

In this study was developed a natural process using a biological system for the biosynthesis of nanoparticles (NPs) and possible removal of copper from wastewater by dead biomass of the yeast Rhodotorula mucilaginosa. Dead and live biomass of Rhodotorula mucilaginosa was used to analyze the equilibrium and kinetics of copper biosorption by the yeast in function of the initial metal concentration, contact time, pH, temperature, agitation and inoculum volume. Dead biomass exhibited the highest biosorption capacity of copper, 26.2 mg g(-1), which was achieved within 60 min of contact, at pH 5.0, temperature of 30°C, and agitation speed of 150 rpm. The equilibrium data were best described by the Langmuir isotherm and Kinetic analysis indicated a pseudo-second-order model. The average size, morphology and location of NPs biosynthesized by the yeast were determined by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM). The shape of the intracellularly synthesized NPs was mainly spherical, with an average size of 10.5 nm. The X-ray photoelectron spectroscopy (XPS) analysis of the copper NPs confirmed the formation of metallic copper. The dead biomass of Rhodotorula mucilaginosa may be considered an efficiently bioprocess, being fast and low-cost to production of copper nanoparticles and also a probably nano-adsorbent of this metal ion in wastewater in bioremediation process.