The role of matrix metalloproteinases in dental erosion

Effect of root dentin pretreatment with different concentrations of chitosan on the push-out bond strength of fiber post using a self-adhesive resin cement

BACKGROUND

This study aimed to investigate the effect of root dentin pretreatment with different concentrations of chitosan on the push-out bond strength (PBS) of fiber post using a self-adhesive resin cement.

METHODS

After post-space preparation in 56 maxillary central incisors that underwent endodontic treatment and were filled with gutta-percha (Spident, Korea) and AH Plus resin sealer (Dentsply, USA), the teeth were randomly divided into four groups (n = 14) for pretreatment with 2.5% chitosan, 1% chitosan, 17% ethylenediamine tetra-acetic acid (EDTA), and saline. Fiber posts were cemented into the root canals using Panavia SA resin cement. The teeth were then thermocycled (5°C-55°C, 5,000 cycles), and the roots were sectioned into coronal, middle, and apical thirds. The PBS was measured in a universal testing machine. The mode of failure was also determined under a stereomicroscope and a scanning electron microscope (SEM). The PBS data were analyzed using two-way ANOVA and Tukey's post hoc test.

RESULTS

The mean PBS of 2.5% chitosan group was significantly higher than that of control group at the coronal, middle, and apical thirds of the root in the post-placement region. However, 2.5% chitosan group had a significant difference in PBS with the EDTA group only in the middle and coronal thirds (P < 0.05). Pretreatment with 1% chitosan and 17% EDTA did not significantly increase the PBS at any level from the root in the post-placement region. Cohesive failure was dominant in 2.5% chitosan group, while mixed failure had the highest frequency in other groups.

CONCLUSION

Root dentin pretreatment with 2.5% chitosan improved the PBS of fiber post to root dentin by using a self-adhesive resin cement.

Occlusion, acid resistance, and elemental characterization of dentin treated with desensitizing agents

The objective of this study was to evaluate the occlusion potential of in-office desensitizing agents, and characterize the human dentin elements after acid exposure. Twelve human dentin discs were sectioned into four specimens each, and randomized into treatments (n = 20): no treatment (negative control); no treatment and 6% citric acid exposure (positive control); application of Gluma desensitizer (Heraeus Kulzer) or PRG Barrier Coat (Shofu), followed by 6% citric acid exposure. Occlusion and dentin surface characteristics were determined by scanning electron microscopy (SEM, n = 10), and elemental composition (at%), by energy-dispersive X-ray spectroscopy (EDS, n = 10). Three calibrated, blinded evaluators used SEM to categorize the occlusion potential: 1 = occluded, 2 = partially unoccluded, 3 = equally occluded/unoccluded, 4 = partially occluded, 5 = unoccluded. Data were analyzed by weighted kappa, Friedman, and Nemenyi tests (α = 0.05). For SEM, mean occlusion scores were higher for the PRG Barrier Coat than the positive control (p = 0.0235). Most specimens in the controls scored 4 or 5. The most frequent scores for PRG Barrier Coat were 1(60%) and 2(20%), while 30% of Gluma specimens scored 1 and 2. Gluma showed intratubular precipitation, while PRG Barrier Coat covered dentinal tubules totally or partially. For EDS, the K% was lower for Gluma than the negative control (p = 0.0046), with Si peaks in dentin treated with PRG Barrier Coat. The bioactive in-office desensitizing agent with S-PRG filler (PRG Barrier Coat) promoted dentin tubule occlusion, and persisted after exposure to acid.

Caries affected Dentin biomodification using Bromelain, Riboflavin photosensitizer via UVA, and Chitosan Nanoparticles on shear bond strength and microleakage scores: A SEM evaluation

AIMS

Assessment of the impact of different dentin bio-modifiers i.e., Bromelain, Riboflavin photosensitizer (RFP/Ultraviolet-A), and Chitosan nanoparticles (CHNPs) on the shear bond strength (SBS) and microleakage of composite bonded to acid etched carious affected dentin (CAD).

MATERIALS AND METHODS

Sixty-four human molars in which carious lesions extend till the middle third of the dentin were included. The infected dentin was removed and CAD was exposed. All specimens were categorized into four groups based on the application of dentin bio-modifier (n = 16) Group 1 (No dentin modifier), Group 2 (Bromelain), Group 3 (RFP/UVA), and Group 4 (CHNPs). Dental adhesive application and composite buildup were performed. A dye penetration test was used to assess marginal leakage. Resin CAD interface assessment was performed using SEM. For SBS and failure pattern analysis, a universal testing machine and stereomicroscope were used respectively. One-way ANOVA followed by Bonferroni's posthoc test was employed to analyze the differences among various groups (p≤0.05) RESULTS: The lowest microleakage (13.27 ± 0.10) and highest SBS (11.64 ± 0.16 MPa) were observed in Group 2 (Bromelain). However, the maximum values of marginal leakage (37.21 ± 0.21) and minimum SBS (7.34 ± 0.07 MPa) were detected in Group 1 samples. The length of resin tags in the Group 2 specimens (Bromelain) was found to be the highest (102.11 ± 5.12 μm). However, Group 1 (No modifier) exhibited the lowest resin tag length (50.45 ± 2.37 μm).

CONCLUSION

Caries-affected dentin modified with Bromelain resulted in satisfactory SBS with minimal microleakage scores. Chitosan nanoparticles and RFP/Ultraviolet-A also presented better outcomes in terms of microleakage and SBS than the control.

The Protective Effects of Silver Fluoride Solution and Fluoride Varnish on Dental Erosion-An In Vivo Study

Objectives: Dental erosion has evolved into a common condition with growing concern in the dental community. The aim of this study was to explore the protective effects of two highly fluoridated products, silver fluoride solution (silver diamine fluoride-potassium iodide solution, SDF-KI) and fluoride varnish, on dental erosion in mouse. Methods: Two groups of ten young CD-1 mouse were given a cola drink ad libitum over a 6-week period. A prophylactic treatment with a silver fluoride solution (38% SDF 48,000 ppm F with a silver concentration of 253,900 ppm) and a fluoride varnish (NaF, 22,600 ppm F) were applied on the mandibular molars, performed under sedation twice a week during the whole experiment. Furthermore, two control groups of ten mice were included, a positive (cola drink) and a negative (distilled water) control. A terminal procedure was followed by dissection of mandibular molars and analysis of them using scanning electron microscopy (SEM). The first molars were transversely ground, further analyzed by SEM, and measured for tooth height and tooth tissue loss. Results: Analyses of mandibular molars treated with a fluoride varnish indicated a 5% decreased tooth tissue loss, compared to the molars which served as a positive control. The best effect was achieved with the application of silver fluoride solution, displaying a 35% decreased tooth tissue loss compared to the positive control group. Conclusions: Preventive treatment with a solution of silver fluoride solution exhibits greater protection against dental erosion compared to a traditional fluoride varnish. This study indicates that silver fluoride solution is an effective fluoride compound and is highly beneficial in a clinical setting with the aim of preventing dental erosion.

Impact of cathepsin K-induced proteoglycans degradation on dentin collagen

OBJECTIVES

This study aimed to investigate the effects of cathepsin K (catK) on proteoglycans (PGs) and the subsequent impacts on dentin collagen degradation.

MATERIALS AND METHODS

Demineralized dentin samples were prepared and divided into the following groups: deionized water (DW), 0.1 U/mL chondroitinase ABC (C-ABC), and 1 μM odanacatib (ODN). Then, they were immersed for 48 h and then incubated in 1 mL of PBS (pH=5.5) at 37 °C for 5 d. Glycosaminoglycan (GAG) were examined to explore the degradation of PGs by catK. To determine the effect of catK-mediated PGs on dentin collagen degradation, hydroxyproline (HYP) assays, assessment of the degree of dentin crosslinking, and scanning electron microscopy (SEM) were assessed. Statistical analysis was conducted using one-way ANOVA followed by Tukey's tests or Welch's ANOVA followed by Dunnett's tests at a significance level of 0.05.

RESULTS

The production of GAG was significantly lower in the ODN group than in the DW group (P < 0.05), revealing that PG degradation was reduced in dentin after ODN treatment. Additionally, ODN treatment minimized the gaps in collagen fibers, improved fiber arrangement, and significantly increased the degree of collagen crosslinking, subsequently reducing the total amount of collagen fiber degradation in the dentin (P < 0.05).

CONCLUSIONS

CatK-mediated degradation of PGs negatively impacted the stability of collagen fibers, promoted gaps, led to a less organized arrangement of dentin collagen fibers, ultimately increasing collagen degradation.

The Effect of Actives in Desensitizing and Conventional Mouth Rinses Against Dentin Erosive Wear

This study evaluated the effect of actives present in conventional and desensitizing mouth rinses on the control of dentin erosive tooth wear. Two hundred and seventy dentin specimens from human molars were prepared. The specimens were randomly allocated into 10 experimental groups (n=10): 4 corresponding to desensitizing mouth rinses, 4 to conventional mouth rinses, a negative control group (C-: distilled water), and a positive control group (C+: 500 ppm fluoride plus 800 ppm tin mouth rinse). Specimens were subjected to an erosion-abrasion cycling model: 5 min immersion in 0.3% citric acid and 60 min exposure to artificial saliva. This procedure was repeated 4x/day for 5 days. Immediately after the first and last erosive challenges, the specimens were brushed with a slurry of fluoride toothpaste for 15 s, with a total of 2 min exposure to the slurry. Afterward, the specimens were exposed to the mouth rinses. Dentin surface loss (SL, in µm) was determined by optical profilometry. Data were statistically analyzed by using Kruskal-Wallis and Dunn's tests (α=0.05). The only mouth rinses that presented significantly lower dentin SL than the C- was a desensitizing one containing sodium fluoride (220 ppm F-) with dipotassium oxalate (1.4%) and the C+ (p<0.001 and p=0.013, respectively), without significant differences between them (p>0.05). Dentin SL of the other groups did not significantly differ from the C- (p>0.05). The combination of sodium fluoride with dipotassium oxalate in a desensitizing mouth rinse showed a promising result against dentin erosive wear, matching the protection offered by a fluoride/tin mouth rinse.

Effect of natural agents on the bond strength to eroded dentin

OBJECTIVE

This study evaluated the effect of bromelain and propolis extract on the bond strength (BS) of a universal adhesive system to eroded dentin.

MATERIALS AND METHODS

Sixty human molars with exposed dentin were halved, with one half protected by composite resin and the other subjected to erosive treatment followed by remineralization. After the erosive treatment, the composite resin was removed, and the teeth were randomly assigned to three groups (n = 20): Adhesive-Control System; Br-10%; Pr-16%. Following the treatments, composite resin blocks were built on the dentin surfaces and sticks of 0.9 mm2 were obtained and stored in distilled water at 37°C for 24 h and 6 months. After these periods, the sticks underwent bond strength testing and the data were analyzed using 2-way ANOVA, Bonferroni test, p < 0.05. Fracture patterns were observed using light microscope and scanning electron microscopy.

RESULTS

Irrespective of the substrate and aging duration, propolis demonstrated higher BS (p < 0.05) compared to the other treatments. Eroded dentin exhibited greater removal of the smear layer and dentinal tubules with a larger diameter than sound dentin, especially when treated with bromelain, resulting in the formation of resin tags.

CONCLUSIONS

Propolis consistently promoted the highest bond strength, irrespective of aging or substrate. Eroded dentin treated with propolis, or bromelain exhibited a higher prevalence of non-adhesive fractures and resin tag formation.

CLINICAL SIGNIFICANCE

Propolis shows promise for enhancing the longevity of adhesive restorations in eroded dentin due to its ability to promote high bond strength.

Importance of Metalloproteinase 8 (MMP-8) in the Diagnosis of Periodontitis

Periodontitis is a complex condition. Left untreated, it leads to tooth loss and the need for prosthetic treatment. The incidence of periodontitis is steadily increasing, so new methods are being sought to aid in the diagnosis of the disease. Among the methods postulated is the determination of concentrations of bioactive compounds which include extracellular matrix metalloproteinases (MMPs). These enzymes are present in various structural elements of the stomatognathic system. The most promising enzyme of this group appears to be metalloproteinase 8 (MMP-8). MMP-8 assays are performed in gingival fluid or saliva, and MMP-8 levels have been shown to be higher in patients with periodontitis compared to healthy subjects and correlated with some clinical parameters of the condition and the severity of the disease. In addition, the preliminary usefulness of this enzyme in evaluating the effectiveness of periodontal treatment and doxycycline therapy has been demonstrated. Determination of the active form of MMP-8 (aMMP-8) in oral rinse fluid using off-the-shelf assays shows the highest potential. Despite reports about aMMP-8 and promising data on the role of MMP-8 in periodontal diagnosis, a clear determination of the usefulness of this enzyme requires further research.

Biomodification of eroded and abraded dentin with epigallocatechin-3-gallate (EGCG)

This study aimed to evaluate in vitro the effects of epigallocatechin-3-gallate (EGCG) as a biomodifier of eroded and abraded dentin. Forty dentin specimens were obtained from the buccal surface of bovine teeth. The specimens were randomly distributed in 4 groups according to dentin substrate: sound or eroded/abraded and dentin biomodification: with 0.5% EGCG and no biomodification (control group). Specimens were subdivided according to aging time: 24 h and 3 months for the analysis of microtensile bond strength (n = 10), morphology of the adhesive interface by SEM (n = 3) and dentin micropermeability by fluorescence microscope (n = 8). Statistical analysis was performed using SPSS system version 20.0 with a significance level of 5%. The results revealed that the control group with eroded-abraded dentin exhibited the lowest bond strength values at 24 h and 3 months. However, the application of 0.5% EGCG as a biomodifier significantly increased bond strength on both sound and eroded-abraded substrates. After 3 months, all groups exhibited an adhesive interface with a more intense fluorescence in the adhesive layer, indicating an increase in porosity at the interface. In conclusion, the EGCG application as a biomodifier enhanced bond strength on both sound and eroded-abraded dentin substrates, however, adhesive interfaces are more regular when restorations are performed on sound dentin, regardless of the biomodification with EGCG.

Does the application of dimethyl sulfoxide improve resin bonding to eroded dentine? Four-year in vitro evaluation

OBJECTIVE

To evaluate the effect of dimethyl sulfoxide (DMSO) on the microtensile bond strength (µTBS) and nanoleakage (NL) of universal adhesives on eroded dentine, immediately and after four years of water storage.

METHODS

Sixty-four sound human molars were distributed into 16 groups according to (1) Dentine surface (sound and eroded dentine); (2) dimethyl sulfoxide application (with or without); (3) Application mode (etch-and-rinse or self-etch) and (4) Storage time (immediate and four years). One mild universal adhesive was used (Scotchbond Universal). The restoration was then performed with a composite resin and the specimens were sectioned into resin-dentine bonded sticks. Resin-dentine bonded sticks were tested (immediately and after four years of water storage) for µTBS (0.5 mm/min) or used to assess NL. Data on μTBS and NL were analyzed using four-way ANOVA and Tukey's test (α = 0.05).

RESULTS

Only the 3-way cross-product interaction 'substrate vs DMSO vs time' was statistically significant (p = 0.007). Eroded dentine showed a lower mean of µTBS and a higher mean of NL values than sound dentine. However, when DMSO was applied, no significant decrease of μTBS or NL values was observed after four years of water storage, regardless of adhesive strategies, or dentine evaluated, when compared to immediate results.

SIGNIFICANCE

Water-based DMSO pre-treatments not only prevent degradation of MDP-containing simplified adhesives but also serve as a potential alternative to improve long-term bonding properties to eroded dentine. The versatility of using a single pre-treatment for both self-etch or etch-and-rinse bonding to eroded dentin may facilitate future clinical applications.

Cathepsins in oral diseases: mechanisms and therapeutic implications

Cathepsins are a type of lysosomal globulin hydrolase and are crucial for many physiological processes, including the resorption of bone matrix, innate immunity, apoptosis, proliferation, metastasis, autophagy, and angiogenesis. Findings regarding their functions in human physiological processes and disorders have drawn extensive attention. In this review, we will focus on the relationship between cathepsins and oral diseases. We highlight the structural and functional properties of cathepsins related to oral diseases, as well as the regulatory mechanisms in tissue and cells and their therapeutic uses. Elucidating the associated mechanism between cathepsins and oral diseases is thought to be a promising strategy for the treatment of oral diseases and may be a starting point for further studies at the molecular level.

Mineralization promotion and protection effect of carboxymethyl chitosan biomodification in biomimetic mineralization

Biomimetic mineralization emphasizes reversing the process of dental caries through bio-inspired strategies, in which mineralization promotion and collagen protection are equally important. In this study, carboxymethyl chitosan (CMC) was deemed as an analog of glycosaminoglycan for biomimetic modification of collagen, both of the mineralization facilitation and collagen protection effect were evaluated. Experiments were carried out simultaneously on two-dimensional monolayer reconstituted collagen model, three-dimensional reconstituted collagen model and demineralized dentin model. In three models, CMC was successfully cross-linked onto collagen utilizing biocompatible 1-Ethyl-3(3-dimethylaminopropyl) carbodiimide hydrochloride and N-hydroxy sulfosuccinimide sodium salt to achieve biomodification. Results showed that CMC biomodification increased collagen's hydrophilicity, calcium absorption capacity and thermal degradation resistance. In demineralized dentin model, the activity of endogenous matrix metalloproteinases was significantly inhibited by CMC biomodification. Furthermore, CMC biomodification significantly improved cross-linking and intrafibrillar mineralization of collagen, especially in the two-dimensional monolayer reconstituted collagen model. This study provided a biomimetic mineralization strategy with comprehensive consideration of collagen protection, and enriched the application of chitosan-based materials in dentistry.

Effects of protease inhibitors on dentin erosion: an in situ study

OBJECTIVE

This in situ study aimed to evaluate the effects of the inhibitors of matrix metalloproteinases (MMPs) and cysteine cathepsins on dentin erosion.

MATERIALS AND METHODS

Ten volunteers participated in this study. Each volunteer wore an intraoral appliance containing 4 dentin specimens subjected to different treatments: deionized water as a control, 1 mM 1,10-phenanthroline (an MMP inhibitor), 50 µM E-64 (a cysteine cathepsin inhibitor), and 1 mM 1,10-phenanthroline + 50 µM E-64. The specimens were dipped in 5 ml of the respective solutions for 30 min at room temperature and then exposed to in vivo erosive challenges by rinsing with 150 ml of a cola drink (4 × 5 min/day) for 7 days. The substance loss of the specimens was measured by profilometry. The transverse sections of the specimens were examined using scanning electron microscopy. Thereafter, the demineralized organic matrix (DOM) of the specimens was removed using type I collagen enzyme and assessed by performing profilometry. The differences in substance loss and DOM thickness among the groups were analyzed by one-way repeated-measures analysis of variance (ANOVA) and Bonferroni's test at a level of P < 0.05.

RESULTS

Protease inhibitors significantly reduced substance loss in comparison to that of the control group (all P < 0.05). A significantly thicker DOM was observed for the specimens treated with protease inhibitors than for the control specimens (all P < 0.05). No significant differences in substance loss or DOM thickness were found among the MMP inhibitor, cysteine cathepsin inhibitor, and MMP + cysteine cathepsin inhibitor groups.

CONCLUSIONS

The use of MMP and cysteine cathepsin inhibitors was shown to increase the acid resistance of human dentin, which may be due to the preservation of the DOM.

CLINICAL RELEVANCE

The application of protease inhibitors could be considered an appropriate preventive strategy for dentin erosion.

Dual protective effect of the association of plant extracts and fluoride against dentine erosion: In the presence and absence of salivary pellicle

OBJECTIVES

To verify the protective effect of plant extracts associated with fluoride against dental erosion of dentine, in the presence and absence of a salivary pellicle.

METHODS

Dentine specimens (n = 270) were randomly distributed into 9 experimental groups (n = 30/group): GT (green tea extract); BE (blueberry extract); GSE (grape seed extract); NaF (sodium fluoride); GT+NaF (green tea extract and NaF); BE+NaF (blueberry extract and NaF); GSE+NaF (grape seed extract and NaF); negative control (deionized water); and a positive control (commercialized mouthrinse containing stannous and fluoride). Each group was further divided into two subgroups (n = 15), according to the presence (P) or absence (NP) of salivary pellicle. The specimens were submitted to 10 cycles: 30 min incubation in human saliva (P) or only in humid chamber (NP), 2 min immersion in experimental solutions, 60 min of incubation in saliva (P) or not (NP), and 1 min erosive challenge. Dentine surface loss (dSL-10 and dSL-total), amount of degraded collagen (dColl) and total calcium release (CaR) were evaluated. Data were analyzed with Kruskal-Wallis, Dunn's and Mann-Whitney U tests (p>0.05).

RESULTS

Overall, the negative control presented the highest values of dSL, dColl and CaR, and the plant extracts showed different degrees of dentine protection. For the subgroup NP, GSE showed the best protection of the extracts, and the presence of fluoride generally further improved the protection for all extracts. For the subgroup P, only BE provided protection, while the presence of fluoride had no impact on dSL and dColl, but lowered CaR. The protection of the positive control was more evident on CaR than on dColl.

CONCLUSION

We can conclude that the plant extracts showed a protective effect against dentine erosion, regardless of the presence of salivary pellicle, and that the fluoride seems to improve their protection.

Adhesion to eroded enamel and dentin: systematic review and meta-analysis

OBJECTIVE

The aim of this systematic review and meta-analysis was to compare the bond strength between eroded and sound permanent enamel and dentin and to assess whether bonding performance (immediate and after aging) differs between etch&rinse and self-etch adhesives and can be improved by surface pretreatment prior to bonding.

METHODS

Electronic databases (PubMed, Scopus, Embase, Web of Science, CENTRAL, LILACS, BBO) were searched by two reviewers. Random-effect meta-analyses were performed to compare bond strength to sound and eroded dental hard tissues without and with surface pretreatment prior to bonding, respectively. The effect of adhesive mode (etch&rinse vs. self-etch) and aging (immediate vs. aged) was compared using subgroup analyses. Statistical heterogeneity was assessed using Cochran's Q and I²-statistic. Funnel plots and Egger's regression intercept tests were used to evaluate publication bias. Quality and risk of bias of included studies were also assessed.

RESULTS

Fourty-seven studies (45 in vitro, 2 in situ) were included in the systematic review and meta-analyses. Erosion impairs bond strength to dentin (p < 0.001; mean difference: -10.2 MPa [95%CI: -11.9 to -8.6 MPa]), but not to enamel (p = 0.260). Surface pretreatment measures removing or stabilizing the collagenous matrix can improve dentin bond strength (maximum mean difference: +12.4 MPa). Etch&rinse and self-etch adhesives did not perform significantly different on eroded enamel (p = 0.208) and dentin (p = 0.353). The majority of studies (32 of 47) presented a medium risk of bias.

SIGNIFICANCE

Data from in vitro and in situ studies showed that erosion impairs dentin bonding of etch&rinse and self-etch adhesives and makes surface pretreatment prior to bonding of composite restorations necessary.

Hesperidin reduces dentin wear after erosion and erosion/abrasion cycling in vitro

OBJECTIVE

To evaluate the action of hesperidin (HPN) at different concentrations to prevent dentin erosive wear, associated or not to abrasion.

METHODS

A study with 6 experimental groups (n = 10) for erosion (experiment 1) and another 6 for erosion + abrasion (experiment 2). The treatments were: distilled water (DW), DW with collagenase (DW + Col), 0.46% epigallocatechin-3-gallate (EGCG) and 0.1%, 0.5% or 1% HPN. The specimens were submitted to a cycle (3x/day) for 5 days that consisted of immersion on 1% citric acid (5 min), artificial saliva (60 min), treatment (5 min), brushing (150 movements only in experiment 2), and artificial saliva (60 min / overnight). Collagenase was added in artificial saliva for all groups except DW-group. Dentin changes were assessed with optical profilometry and scanning electron microscopy. Data were submitted to one-way analysis of variance and Tukey tests (α = 0.05).

RESULTS

For experiment 1, DW showed the lowest wear and did not significantly differ from EGCG. DW + Col showed the highest wear, being significantly different from HPN at 1%. In experiment 2, DW showed the lowest wear and DW + Col the highest. EGCG showed less wear than the three groups treated with HPN. In addition, for both cycling models, there were no significant differences among the three concentrations of HPN analyzed. In micrographs of HPN-treated groups, it could be observed the formation of a barrier on the dentin that promoted the obliteration of the tubules.

CONCLUSIONS

HPN was able to preserve the demineralized organic matrix layer but did not overcome the effect of EGCG.

In vitro effect of toothpaste with low fluoride combined with sodium trimetaphosphate on dentine erosion

PURPOSE

This study sought to evaluate in vitro the effect of a dentifrice containing sodium trimetaphosphate (TMP) combined or not with low fluoride (500 ppm NaF) on dentine erosion of intrinsic origin.

METHODS

Human root dentine blocks were selected based on surface microhardness and randomly allocated into five groups (n = 12): negative control (0 ppm F; no TMP); F500 (500 ppm NaF); F1500 (1500 ppm NaF-positive control); TMP (1% TMP); and F + TMP (500 ppm NaF + 1% TMP). The blocks were submitted to erosion cycles (3 ×/day) for 3 days (0.01 M HCl, pH 1.5-30 s), treatment (1 min-1:3 p/p dentifrice/distilled water) and remineralization (artificial saliva/120 min). Dentine alterations were determined according to the percentage of microhardness loss (%HL), surface loss (SL) and surface analysis by scanning electron microscopy. The data were analyzed using one-way ANOVA (p < 0.05).

RESULTS

The values of SL and %HL in each group were, respectively: negative control (1.36 ± 0.36; 57.29 ± 14.14), F500 (1.46 ± 0.28; 65.66 ± 5.11), F1500 (1.52 ± 0.36; 61.66 ± 5.15), TMP (1.45 ± 0.45; 62.08 ± 3.83) and F + TMP (1.38 ± 0.42; 63.38 ± 6.47). There was no statistically significant difference in all the parameters (p = 0.873 and p = 0.152).

CONCLUSION

The dentifrices containing TMP combined or not with fluoride were not able to prevent dentine erosion.

Quercetin as an Auxiliary Endodontic Irrigant for Root Canal Treatment: Anti-Biofilm and Dentin Collagen-Stabilizing Effects In Vitro

Bacterial reinfection and root fracture are the main culprits related to root canal treatment failure. This study aimed to assess the utility of quercetin solution as an adjunctive endodontic irrigant that does not weaken root canal dentin with commitment anti-biofilm activity and bio-safety. Based on a noninvasive dentin infection model, dentin tubules infected with Enterococcus faecalis (E. faecalis) were irrigated with sterile water (control group), and 0, 1, 2, 4 wt% quercetin-containing ethanol solutions. Live and dead bacteria percentages in E. faecalis biofilms were analyzed by confocal laser scanning microscopy (CLSM). Elastic modulus, hydroxyproline release and X-ray photoelectron spectroscopy (XPS) characterization were tested to evaluate the irrigants’ collagen-stabilizing effect. The cytotoxicity was tested by CCK-8 assay. Quercetin increased the proportion of dead bacteria volumes within E. faecalis and improved the flexural strength of dentin compared to control group (p < 0.05). Quercetin-treated dentin matrix had less elasticity loss and hydroxyproline release after collagenase degradation (p < 0.05). Moreover, quercetin solutions revealed an increase in the C-O peak area under both C1s and O1s narrow-scan spectra of XPS characterization, and no cytotoxicity (p > 0.05). Quercetin exhibited anti-biofilm activity, a collagen-stabilizing effect with cytocompatibility, supporting quercetin as a potential candidate for endodontic irrigant.

Extracellular matrix degradation by host matrix metalloproteinases in restorative dentistry and endodontics: An overview

Matrix metalloproteinases (MMPs) are a group of over 25 secreted and membrane-bound enzymes responsible for pericellular substrate degeneration. In response to injury, they play key roles in morphogenesis, wound healing, tissue repair and remodeling. They have been isolated from dentin, odontoblasts, pulp and periapical tissue. They play a major role in the formation of dentin matrix and secondary and tertiary dentin. These are also responsible for releasing dentinal growth factors. MMP family proteins elicit a dual role in the pathogenesis of inflammation, stimulating protective innate and/or adaptive immune functions, as well as tissue destruction. The main organic component of tooth structure is collagen, and MMPs that degrade collagen and the extracellular matrix have been implicated in the progression of dental caries, dental erosion as well as degradation of the hybrid layer. MMPs have also been shown to be active in pulpitis, and studies have shown that they can be used as diagnostic markers of pulpal and periapical inflammation. This review describes the role of MMPs in dental caries, dental erosion, bond stability as well as in pulpal and periapical inflammation.

In situ effect of a proanthocyanidin mouthrinse on dentin subjected to erosion

Proanthocyanidin has been shown to be efficient in inhibiting matrix metalloproteinases.

Effect of chitosan solutions with or without fluoride on the protection against dentin erosion in vitro

The aim of this study was to assess the protective effect of experimental solutions containing chitosan at different viscosities with or without fluoride (TiF₄ /NaF) on dentin loss in vitro. Bovine dentin samples (n = 15) were prepared and allocated to one of the following treatments: (i) 0.5% chitosan (500 mPas); (ii) 0.5% chitosan (2,000 mPas); (iii) 0.042% NaF and 0.049% TiF₄ ; (iv) as (iii) with addition of 0.5% chitosan (500 mPas); (v) as (iii) with addition of 0.5% chitosan (2,000 mPas); (vi) commercial solution with SnCl₂ /AmF/NaF (positive control); or (vii) deionized water (negative control). The samples were submitted to pH cycling for 7 d (0.1% citric acid, 4 × 90 s d^-1 ). The treatment was applied once a day for 30 s. The dentin loss was quantified using a contact profilometer. Three samples per group were evaluated using scanning electron microscopy. The dentin loss (μm) was submitted to anova and Tukey's test for differences between treatments. Among the treatments tested, only chitosan 500 mPas was able to statistically significantly reduce the dentin loss compared to the negative control, being similar to the positive control. TiF₄ /NaF, whether with or without chitosan, had no protective effect. Chitosan 500 mPas and SnCl₂ /AmF/NaF solutions have comparable protective effect against dentin erosion in vitro.

Does delayed toothbrushing after the consumption of erosive foodstuffs or beverages decrease erosive tooth wear? A systematic review and meta-analysis

OBJECTIVE

Controversy exists regarding the effectiveness of delayed toothbrushing in decreasing erosive tooth wear (ETW). The purpose of this systematic review and meta-analysis was to assess the effects of delayed toothbrushing on ETW.

MATERIALS AND METHODS

This systematic review and meta-analysis was conducted according to the PRISMA statement and registered in PROSPERO (CRD42020200463). PubMed, Embase, and Web of Science databases were systematically searched with no publication year limits. Screening and data extraction were performed independently by two reviewers. In situ and in vitro studies comparing ETW after delayed and immediate toothbrushing following an erosive attack were included. Review Manager software 5.3 (The Cochrane Collaboration, Oxford, UK) was used for statistical analyses. Heterogeneity was assessed with the Cochran Q test and I² statistics.

RESULTS

Of the 565 potentially relevant studies, 26 full-text articles were assessed for eligibility. Twelve articles were included in the systematic review, and 11 were included in the qualitative analyses. No significant difference in the ETW of human enamel was observed between delayed and immediate toothbrushing (P = 0.13), whereas significantly less ETW of bovine enamel was observed after delayed toothbrushing (P < 0.001). No significant difference in the ETW of bovine dentin was observed between delayed and immediate toothbrushing (P = 0.34). Studies on human dentin were not available. Subgroup analyses revealed a significant contribution of the use of fluoridated toothpaste to decreasing the ETW of human enamel after erosion and toothbrush abrasion (P = 0.02).

CONCLUSIONS

Bovine and human teeth behaved differently in response to erosion and toothbrush abrasion. Delayed toothbrushing after an erosive attack was not effective at decreasing the ETW of human enamel compared to immediate toothbrushing, whereas it was effective at decreasing the ETW of bovine enamel.

CLINICAL RELEVANCE

Delayed toothbrushing alone after the consumption of erosive foodstuffs or beverages is not capable of preventing erosive enamel wear.

Could applying gels containing chlorhexidine, epigallocatechin-3-gallate, or proanthocyanidin to control tooth wear progression improve bond strength to eroded dentin?

STATEMENT OF PROBLEM

A consensus on whether or how to treat eroded dentin to bond to composite resins is lacking. The role of gels containing chlorhexidine (CHX), epigallocatechin-3-gallate (EGCG), and proanthocyanidin (PAC) in controlling erosive wear progression needs to be evaluated for bonding.

PURPOSE

The purpose of this in vitro study was to evaluate the effect of gels containing antiproteolytic agents (CHX or EGCG) or an antiproteolytic and also collagen crosslinking agent (PAC) to control tooth wear progression on the microtensile bond strength (μTBS) of an adhesive system plus a composite resin to simulated eroded dentin.

MATERIAL AND METHODS

Superficial occlusal dentin surfaces obtained from sectioned third molars were ground with SiC paper (600-grit; 1 minute; N-normal dentin) or subsequently submitted to an initial erosive challenge (Coca-Cola; 5 minutes). They then received one of the following treatments: application of a placebo (P), a 0.12% CHX digluconate, an EGCG at 400 μM, or a 10% PAC gel (vehicle: hydroxyethylcellulose, propylene glycol, methylparaben, imidazolidinyl urea, and deionized water; active principle: as per the experimental groups when applicable) or no treatment (C: control). Initially demineralized dentin was also submitted to pH cycling (Coca-Cola; 5 minutes, 3×/day, 5 days) to simulate eroded dentin (E). After acid etching all the specimens, adhesive Adper Single Bond 2 was applied, and composite resin (Filtek Z350 XT) was placed. After 24 hours storage in distilled water at 37 °C, the specimens were sectioned into beams, and the μTBS was tested at 0.5 mm/minute. The μTBS values obtained were evaluated considering each tooth as an experimental unit, and 2-way ANOVA and the Tukey post hoc test for multiple comparisons were applied (α=.05).

RESULTS

Immediate μTBS values for the eroded dentin were always lower than those for the normal dentin, irrespective of whether any of the gels were applied for wear control.

CONCLUSIONS

CHX, EGCG, PAC, and placebo gels, applied after the initial demineralization and before the pH cycling to simulate the eroded dentin, had a similar effect on the μTBS of the adhesive system plus the composite resin to simulated eroded dentin when compared with nonapplication (control).

Quercetin reduces erosive dentin wear: Evidence from laboratory and clinical studies

OBJECTIVE

The aim of the present study was to evaluate the effect of quercetin on the acid resistance of human dentin through both laboratory and clinical studies.

METHODS

Two hundred and twelve dentin blocks (2 mm × 2 mm × 2 mm) were prepared and used. For the laboratory study, dentin specimens were randomly divided into 8 groups (n = 12): deionized water, ethanol, 1.23 × 10⁴ μg/ml sodium fluoride (NaF), 120 μg/ml chlorhexidine, 183.2 μg/ml epigallocatechin gallate (EGCG), and 75 μg/ml, 150 μg/ml, and 300 μg/ml quercetin (Q75, Q150, and Q300). The specimens were treated with the respective solutions for 2 min and then subjected to in vitro erosion (4 cycles/d for 7 d). The surface microhardness loss (%SMH_l), erosive dentin wear, and surface morphology were evaluated and compared. For the impact on MMP inhibition, the release of crosslinked carboxyterminal telopeptide of type I collagen (ICTP) and the thickness of the demineralized organic matrix (DOM) were measured using additional dentin specimens. For the clinical study, the specimens were treated with NaF or Q300 for 2 min and then subjected to in vivo erosion (4 cycles/d for 7 d). The %SMH_l and erosive dentin wear of the specimens were measured to determine whether quercetin similarly inhibits erosion in situ.

RESULTS

The quercetin-treated group had a significantly lower %SMH_l and erosive dentin wear than any other group, and the effect was concentration-dependent in vitro (P < 0.05). Dentin treated with quercetin produced significantly less ICTP and had a thicker DOM than the control dentin (P < 0.05). After in vivo erosion, the %SMH_l and erosive dentin wear of the Q300 group were significantly lower than those of the control group (P < 0.05).

SIGNIFICANCE

The application of quercetin was shown, for the first time, to increase the acid resistance of human dentin, possibly through MMP inhibition and DOM preservation.

Effect of black tea and matrix metalloproteinase inhibitors on eroded dentin in situ

Purpose of this in situ study was to evaluate the surface properties of eroded dentin specimens activated with three different matrix metalloproteinase (MMP) inhibitors (chlorhexidine [CHX], fluoride, green tea), black tea, and water. One hundred eighty dentin samples were prepared from extracted third molars and then samples divided into six groups. Ten volunteers were carried three specimens of each group, on acrylic palatal appliances, which were fabricated exactly for them (n = 3). Erosive cycles were done by immersing appliances in cup containing Cola and was followed by rinsing with test solutions. Microhardness values were measured. Surface properties were investigated by atomic force microscopy (AFM). Lowest change in microhardness was shown in fluoride group whereas negative control group (water) had the highest change. There were no statistically significant differences among surface roughness changes (p > .05). The least change in microhardness was seen in the fluoride group (13.05 ± 8.07), while the control group showed the highest change (33.80 ± 12.42) and was statistically significant when compared to other groups (p < .05). Besides lowest depth, values were shown in fluoride group as well. AFM evaluations showed macromolecular deposits on surfaces of fluoride, CHX, and black tea groups. No superior results were detected in CHX + fluoride group and black tea showed similar surface characteristics as green tea. Mouthrinses containing not only green tea but also black tea could be beneficial for patients with exposed dentin surfaces. Catechines and theaflavins in teas could be useful for improving surface quality.

Prevention of dental caries by grape seed extract supplementation: A systematic review

BACKGROUND

Dental caries are the most prominent chronic disease of children and adults worldwide, and facilitating evidence-based, preventative care for their prevention is critical. Caries are traditionally and successfully prevented by regular fluoride use, but there are opportunities to halt and restore caries with alternative agents in addition to fluoride use. Grape seed extract (GSE) is a readily available plant-based supplement that, due to its concentrated levels of proanthocyanidins, has promising characteristics that may assist in dental caries prevention.

AIM

The goal of this review was to investigate whether current research supports use of grape seed extract to prevent dental caries formation.

METHODS

A systematic review of articles related to grape seed extract, prevention of dental caries, inhibition of Streptococcus mutans, and remineralization was conducted. Articles were first chosen by inclusion of dental models that used grape seed extract as an intervention, and then by strength of study design.

RESULTS

Twenty articles were reviewed. Studies overall supported three unique grape seed extract properties facilitating dental caries prevention. In the first articles reviewed, grape seed extract inhibited proliferation of bacterial biofilms on tooth surfaces. In addition, studies reviewed indicated that grape seed extract promoted dental remineralization.

CONCLUSIONS

Caries prevention by grape seed extract may be unique compared with fluoride, and is linked to grape seed extract's bacteriostatic and collagen crosslinking properties. Future research should investigate potential delivery methods, and benefits of combined grape seed extract use with known caries preventative agents, in human participants.

Threats to adhesive/dentin interfacial integrity and next generation bio-enabled multifunctional adhesives

Nearly 100 million of the 170 million composite and amalgam restorations placed annually in the United States are replacements for failed restorations. The primary reason both composite and amalgam restorations fail is recurrent decay, for which composite restorations experience a 2.0-3.5-fold increase compared to amalgam. Recurrent decay is a pernicious problem-the standard treatment is replacement of defective composites with larger restorations that will also fail, initiating a cycle of ever-larger restorations that can lead to root canals, and eventually, to tooth loss. Unlike amalgam, composite lacks the inherent capability to seal discrepancies at the restorative material/tooth interface. The low-viscosity adhesive that bonds the composite to the tooth is intended to seal the interface, but the adhesive degrades, which can breach the composite/tooth margin. Bacteria and bacterial by-products such as acids and enzymes infiltrate the marginal gaps and the composite's inability to increase the interfacial pH facilitates cariogenic and aciduric bacterial outgrowth. Together, these characteristics encourage recurrent decay, pulpal damage, and composite failure. This review article examines key biological and physicochemical interactions involved in the failure of composite restorations and discusses innovative strategies to mitigate the negative effects of pathogens at the adhesive/dentin interface. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2466-2475, 2019.

Comparison of in vitro erosion protocols in bovine teeth to simulate natural erosion lesion: analysis of mechanical properties and surface gloss

OBJECTIVE

The aim of this study was to compare two in vitro erosion protocols, in which one simulates in vivo conditions experienced by patients with gastroesophageal disorders or bulimia (HCl-pepsin protocol), and the other simulates the diet of an individual who consumes a high volume of erosive beverages (citric acid protocol). In addition, the mechanical properties and surface gloss of eroded human dentin were compared with those of sound human dentin.

MATERIALS AND METHODS

Blocks of cervical dentin were used: sound human dentin (n=10), human dentin with erosive lesions (n=10), and bovine dentin (n=30). Twenty bovine blocks were subjected to either of two erosion protocols (n=10/protocol). In the first protocol, samples were demineralized using HCl-pepsin solution, then treated with trypsin solution. In the second protocol, samples were demineralized with 2% citric acid. Toothbrushing was performed in both protocols using a toothbrushing machine (15 s with a 150 g load). Ten bovine dentin blocks were not subjected to any erosive treatment. All samples of bovine and human dentin were analyzed to obtain Martens hardness values (MH), elastic modulus (Eit*) and surface gloss. One-way ANOVA and Tukey's test were performed to analyze the data (α=0.05).

RESULTS

Sound human and eroded human dentin groups showed similar MH and Eit* values (p>0.05); however, sound human dentin showed a higher surface gloss value when compared to eroded human dentin (p<0.05). Sound bovine dentin and HCl-pepsin-treated bovine dentin treatments resulted in similar values for both MH and Eit* (p>0.05), but HCl-pepsin-treated bovine dentin and citric acid-treated bovine dentin resulted in lower surface gloss than sound bovine dentin (p<0.05).

CONCLUSIONS

The HCl-pepsin protocol modified bovine dentin properties that could be similar to those that occur on human dentin surfaces with erosive lesions.

Stannous chloride and stannous fluoride are inhibitors of matrix metalloproteinases

OBJECTIVES

Matrix metalloproteinases (MMPs) in dentin and saliva can degrade collagen. Divalent metals are known inhibitors of MMPs, but stannous - such as in the form of stannous chloride (SnCl₂) or stannous fluoride (SnF₂) - is yet to be tested for a possible inhibitory effect. In this study, we tested the inhibitory effect on the proteolytic activity of MMP-2 and MMP-9.

METHODS

Sodium chloride (NaCl), sodium fluoride (NaF), and chlorhexidine (CHX) were used as controls. Gelatin zymography was performed with recombinant human MMP-2 and MMP-9. SnCl₂, SnF₂, NaF, NaCl, and CHX were included either in the incubation buffer (M1) or added to the recombinant MMPs (M2) before the MMPs were analyzed using zymography. Furthermore, the effect of SnCl₂, SnF₂, and NaF on the enzymatic activity of MMP-2 and MMP-9 was measured in human dentin either before or after acid etching using 37%phosphoric acid. The effect of SnCl₂, NaF, and CHX on the viability and of SnCl₂ and NaF on the proliferation of human gingival fibroblasts and L929 mouse fibroblasts was also determined.

RESULTS

For M1, inhibitory concentrations (w/v%) of SnCl₂ 0.5% and 0.5%, SnF₂ 0.25% and 0.12%, NaF 0.12% and 0.5%, CHX 0.012% and 0.05%, were observed for MMP-2 and MMP-9, respectively. NaCl had no inhibitory effect. For M2, SnCl₂ 0.007% and 0.12%, and SnF₂ 0.03% and 0.5%, inhibited MMP-2 and MMP-9, respectively. NaF, NaCl and CHX had no effect. The enzymatic activity was slightly reduced when SnCl₂ and NaF were applied on dentin before the acid attack. Regarding cell viability and proliferation of the cells after stimulation with the respective substances, NaF showed almost no effect, SnCl₂ appeared to increase viability and proliferation of the cells, and CHX decreased the viability of cells.

CONCLUSIONS

Stannous ions caused a direct inhibition of the matrix metalloproteinases, whereas F^- only had an inhibitory effect when added to the zymography buffer.

CLINICAL SIGNIFICANCE

Inhibition of MMPs using SnCl₂ and SnF₂ could play an important role in the prevention of dental erosion and caries. However, the clinical relevance of these findings needs to be proven.

Effect of Phosphorylated Chitosan on Dentin Erosion: An in vitro Study

The aim of this study was to evaluate the antierosive effect of phosphorylated chitosan in dentin. Bovine dentin specimens were randomly distributed into the following groups: (1) no treatment (NoTx/negative control), (2) phosphate-buffered saline solution (PBS), (3) AmF/NaF/SnCl2 (positive control), (4) 0.5% chitosan solution (Chi), (5) 0.5% neutral phosphorylated (NP)-Chi, and (6) 0.5% alkaline phosphorylated (AP)-Chi. The specimens were submitted to de-remineralization treatment cycles for 5 days: 0.5% citric acid (2 min), remineralizing solution (30 min), and surface treatment according to assigned groups (2 min, 6×/day). The loss of dentin surface was measured by profilometry. Hardness and modulus of elasticity were measured using a nanoindenter equipped with a Berkovich diamond tip. The dentin surface was analyzed by scanning electron microscopy (SEM). The largest loss of dentin was observed in the No Tx and PBS groups (approx. 25 µm). The group treated with AmF/NaF/SnCl2 showed less loss of dentin (67% reduction vs. NoTx and PBS), followed by the groups treated with NP-Chi and AP-Chi (33% reduction), and Chi (18% reduction). Nanohardness and modulus of elasticity were similar in the NoTx and PBS groups, with a small increase in stiffness in all other groups. SEM revealed that the experimental solution of AP-Chi had a favorable effect on maintaining the integrity of collagen fibrils. AmF/NaF/SnCl2 showed a preserved mineralized collagen surface. Further studies are warranted to explore this nontoxic phosphorylated chitosan polymer as an effective agent in the prevention and treatment of dental erosion.

Prevention of erosive tooth wear: targeting nutritional and patient-related risks factors

This article provides an overview of the nutritional and patient-related risk factors involved in the aetiology of erosive tooth wear (ETW) and the preventive strategies to counteract them. The first step is to diagnose clinical signs of ETW and to recognise causal factors. Low pH and high buffer capacity of foods/drinks are the major risk factors, while the calcium concentration is the main protective factor. Reduction of frequency of consumption and contact time of erosive foods/drinks with the teeth, use of straws appropriately positioned and consumption of dairy products are advisable. Oral hygiene has a role in the development of ETW, however, postponing toothbrushing is not clinically advisable. In cases of drug abuse, chronic alcoholism, GERD or bulimia, the patient must be referred to a doctor. Immediately after vomiting, patients might be advised to rinse the mouth. Saliva has an important protective role and patients with reduced salivary flow can benefit from the use of chewing gum. Recent studies have focused on improving the protective capacity of the acquired pellicle as well as on the role of protease inhibitors on dentine erosion. However, the degree of evidence for these preventive measures is low. Clinical trials are necessary before these measures can be recommended.

Dynamic Influence of pH on Metalloproteinase Activity in Human Coronal and Radicular Dentin

The aim of this study was to evaluate the effect of pH on the activation of matrix metalloproteinases (MMPs) of human coronal (CD) and radicular dentin (RD). CD and RD were pulverized to powder, and proteins were extracted with 1% phosphoric acid. The extracted proteins and the demineralized powder were separately incubated in the following solutions: 4-aminophenylmercuric acetate (control) or a buffer solution at different pHs (2.5, 4.5, 5.0, 6.0, and 7.0). After incubation, proteins were separated by electrophoresis to measure MMP activities by zymography. To assess the solubilized dentin collagen, the demineralized dentin powder was sustained in incubation buffer, and the amount of hydroxyproline (HYP) released was measured. Zymography revealed MMP-2 gelatinolytic activities for CD and RD in all experimental groups. For both substrates, the lowest pH solutions (2.5, 4.5, and 5.0) yielded higher gelatinolytic activity than those obtained by the highest pH solutions (6.0 and 7.0). For HYP analysis, no detectable absorbance values were observed for pHs of 2.5 and 4.5. The amount of HYP was higher for pH 7.0 than those of all other groups (p < 0.05), except for pH 6.0. No statistical differences were found between pHs 6.0 and 5.0 and control (p > 0.05). The MMP-2 enzyme from human CD and RD is dynamically influenced by pH: at low pH, the extracted enzyme activates this latent form, whereas collagen degradation by the matrix-bound enzyme is only observed when pHs are close to neutral.

Omega-3 and Omega-6 Fatty Acids Act as Inhibitors of the Matrix Metalloproteinase-2 and Matrix Metalloproteinase-9 Activity

Polyunsaturated fatty acids have been reported to play a protective role in a wide range of diseases characterized by an increased metalloproteinases (MMPs) activity. The recent finding that omega-3 and omega-6 fatty acids exert an anti-inflammatory effect in periodontal diseases has stimulated the present study, designed to determine whether such properties derive from a direct inhibitory action of these compounds on the activity of MMPs. To this issue, we investigated the effect exerted by omega-3 and omega-6 fatty acids on the activity of MMP-2 and MMP-9, two enzymes that actively participate to the destruction of the organic matrix of dentin following demineralization operated by bacteria acids. Data obtained (both in vitro and on ex-vivo teeth) reveal that omega-3 and omega-6 fatty acids inhibit the proteolytic activity of MMP-2 and MMP-9, two enzymes present in dentin. This observation is of interest since it assigns to these compounds a key role as MMPs inhibitors, and stimulates further study to better define their therapeutic potentialities in carious decay.

The Impact of the Demineralized Organic Matrix on the Effect of TiF4 Varnish on the Progression of Dentin Erosive Loss

This in vitro study compared the effect of TiF4 varnish with that of NaF varnish, applied on pre-eroded bovine dentin samples, with respect to the progression of erosive loss, in the presence or absence of the demineralized organic matrix (DOM). One hundred and sixty bovine dentin samples were pre-eroded (0.1% citric acid, pH 2.5, 30 min). Half of the samples were subjected to the DOM removal (collagenase solution, 5 days). Samples with and without the DOM were treated according to the groups (n = 20 with DOM and 20 without DOM/group): TiF4 varnish (2.45% F), NaF varnish (2.45% F), placebo varnish (without fluoride) and control (no treatment). Thereafter, the treated samples were submitted to erosive challenges 4 × 90 s/day (0.1% citric acid, pH 2.5) during 7 days. Between the challenges, the samples were immersed in artificial saliva. The dentin erosive loss was measured using contact profilometry (µm, n = 15). Five dentin samples per group were prepared for energy-dispersive X-ray spectroscopy analysis. Data were compared using 2-way ANOVA/Bonferroni test (p < 0.05). Both fluoride varnishes were effective in reducing the erosive loss progression regardless of the dentin condition when compared to placebo varnish and control groups. Despite the fact that the TiF4 varnish was more effective than the NaF varnish for both dentin conditions (p < 0.001), its effect was significantly reduced in the absence of DOM (p < 0.05). It can be concluded that the TiF4 varnish is the best treatment in reducing the progression of dentin erosive loss (100%) in vitro, but its protective effect is more pronounced in the presence of DOM.

Chlorhexidine Prevents Root Dentine Mineral Loss and Fracture Caused by Calcium Hydroxide over Time

Purpose. To evaluate the mineral ion loss of root dentine after treatment with 2% chlorhexidine solution (CHX) and to compare its yield and flexural strength (fs) after exposure to calcium hydroxide [Ca(OH)₂]. Materials and Methods. Dentine bars (DB) were made from 90 roots of bovine incisors and randomized into three groups: G_Control: distilled/deionized water (DDW), G_NaOCl: 2.5% sodium hypochlorite + 17% EDTA, and G_CHX: CHX + DDW. The release of phosphate (PO₄) and calcium (Ca) ions was measured by spectrophotometry. The DB were exposed to Ca(OH)₂ paste for 0, 30, 90, and 180 days. DB were subjected to the three-point bending test to obtain yield and fs values. The fracture patterns were evaluated (20x). Data were analyzed using Kruskal-Wallis and Dunn's post hoc tests or one- and two-way ANOVA followed by Tukey's post hoc test (α = 0.05). Results. G_CHX showed lower PO₄³⁻ and Ca²⁺ ionic release than G_NaOCl (p < 0.001). For yield and fs, G_CHX > G_NaOCl in all periods (p < 0.001), except for yield strength values on 90 days (p = 0.791). A larger frequency of vertical fractures was observed in G_NaOCl and that of oblique fractures in G_CHX (p < 0.05). Conclusions. CHX prevented PO₄³⁻ and Ca²⁺ loss and showed a tendency to preserve the yield and fs of root dentine over time following exposure to Ca(OH)₂ paste.

Mechanistic investigations of matrix metalloproteinase-8 inhibition by metal abstraction peptide

The mechanism of matrix metalloproteinase-8 (MMP-8) inhibition was investigated using ellipsometric measurements of the interaction of MMP-8 with a surface bound peptide inhibitor, tether-metal abstraction peptide (MAP), bound to self-assembled monolayer films. MMP-8 is a collagenase whose activity and dysregulation have been implicated in a number of disease states, including cancer metastasis, diabetic neuropathy, and degradation of biomedical reconstructions, including dental restorations. Regulation of activity of MMP-8 and other matrix metalloproteinases is thus a significant, but challenging, therapeutic target. Strong inhibition of MMP-8 activity has recently been achieved via the small metal binding peptide tether-MAP. Here, the authors elucidate the mechanism of this inhibition and demonstrate that it occurs through the direct interaction of the MAP Tag and the Zn(2+) binding site in the MMP-8 active site. This enhanced understanding of the mechanism of inhibition will allow the design of more potent inhibitors as well as assays important for monitoring critical MMP levels in disease states.

Role of Host-Derived Proteinases in Dentine Caries and Erosion

Demineralization in dentinal caries and erosion exposes dentine organic matrix. This exposed matrix, containing type I collagen and non-collagenous proteins, is then degraded by host collagenolytic enzymes, matrix metalloproteinases (MMPs) and cysteine cathepsins. The knowledge of the identities and function of these enzymes in dentine has accumulated only within the last 15 years, but has already formed a field of research called ‘dentine degradomics'. This research has demonstrated the role of endogenous collagenolytic enzymes in caries and erosion development. In demineralized dentine, the enzymes degrade triple-helical collagen molecules, leading to the gradual loss of collagen matrix. Even before that, they can cleave off the terminal non-helical ends of collagen molecules called telopeptides, leading to the structural changes at the intramolecular gap areas, which may affect or even prevent intrafibrillar remineralization, which is considered essential in restoring the dentine's mechanical properties. They may also cause the loss of non-collagenous proteins that could serve as nucleation sites for remineralization. Here we review the findings demonstrating that inhibition of salivary or dentine endogenous MMPs and cysteine cathepsins may provide preventive means against the progression of caries or erosion. Furthermore, we also suggest the future directions for the new experimental preventive research to gain more knowledge of the enzymes and their function during and after dentine demineralization, and the pathways to find the clinically acceptable means to prevent the functional activity of these enzymes.

Matrix metalloproteinases and other matrix proteinases in relation to cariology: the era of 'dentin degradomics'

Dentin organic matrix, with type I collagen as the main component, is exposed after demineralization in dentinal caries, erosion or acidic conditioning during adhesive composite restorative treatment. This exposed matrix is prone to slow hydrolytic degradation by host collagenolytic enzymes, matrix metalloproteinases (MMPs) and cysteine cathepsins. Here we review the recent findings demonstrating that inhibition of salivary or dentin endogenous collagenolytic enzymes may provide preventive means against progression of caries or erosion, just as they have been shown to retain the integrity and improve the longevity of resin composite filling bonding to dentin. This paper also presents the case that the organic matrix in caries-affected dentin may not be preserved as intact as previously considered. In partially demineralized dentin, MMPs and cysteine cathepsins with the ability to cleave off the terminal non-helical ends of collagen molecules (telopeptides) may lead to the gradual loss of intramolecular gap areas. This would seriously compromise the matrix ability for intrafibrillar remineralization, which is considered essential in restoring the dentin's mechanical properties. More detailed data of the enzymes responsible and their detailed function in dentin-destructive conditions may not only help to find new and better preventive means, but better preservation of demineralized dentin collagenous matrix may also facilitate true biological remineralization for the better restoration of tooth structural and mechanical integrity and mechanical properties.

Effect of Different Matrix Metalloproteinase Inhibitors on Microtensile Bond Strength of an Etch-and-Rinse and a Self-etching Adhesive to Dentin

Aim

This study aimed to analyze the effect of different matrix metalloproteinase (MMP) inhibitors on the microtensile bond strength (microTBS) of an etch-and-rinse and a self-etching adhesive after 9 months of aging.

Methods and Materials

Flat human dentin surfaces were bonded either with an etch-and-rinse adhesive (Optibond FL) or a self-etching adhesive (Clearfil SE Bond). Dentin surfaces were left untreated or were pretreated with MMP inhibitors (2% chlorhexidine digluconate [CHX], 0.05% green tea extract, 1 mM ferrous sulfate, or 0.2 mM galardin) prior to application of the adhesive. Composite buildups were made incrementally. Pretreated groups were tested after 9 months of storage in artificial saliva (37°C) and compared with untreated groups, which were tested immediately (initial microTBS) and upon aging (9-month microTBS). Data were analyzed by linear mixed-model regression. Failure mode analysis was performed microscopically and statistically analyzed by repeated-measures analysis of variance (p&lt;0.05).

Results

MicroTBS of the etch-and-rinse adhesive but not of the self-etching adhesive was significantly decreased by aging. For Optibond FL, pretreatment with 2% CHX, 0.05% green tea extract, and 0.2 mM galardin revealed bond strength values (MPa) similar to the initial microTBS (32.1±14.8) and significantly higher compared with the microTBS (20.3±13.6) of aged untreated dentin. No significant differences were observed between groups bonded with Clearfil SE Bond (initial microTBS: 28.3±12.4; 9-month microTBS: 25.3±11.8). Application of the MMP inhibitors decreased the number of adhesive failures compared with untreated controls after 9 months of aging, but this effect was not significant.

Conclusion

The MMP inhibitors prevented the decrease in microTBS upon aging of the etch-and-rinse but not of the self-etching adhesive.

Influence of metalloproteinases on dentin hybridization of one-bottle or self-etch dental bonding systems

AIM

To assess the influence of dentin substrate and chlorhexidine on the marginal seal of composite resin restorations.

MATERIALS AND METHODS

The sample comprised 20 third molars. Four cavities were drilled in the dentin sur face, followed by sealing and restoration of sound dentin (n = 10) or carious dentin (n = 10). In the control group, cavities were immediately restored as follows: G1: one-bottle bonding agent (OB) + composite resin (CR); G2: chlorhexidine 2.0% (CLX) + OB + CR; G3: self-etch bonding agent (SE) + CR; G4: CLX + SE + CR. In the experimental group (carious dentin), carious lesions were induced with S. mutans and cavities were restored as in the control group. Five specimens from each group (sound and carious) were stored in brain-heart infusion (BHI) medium for 6 months. All specimens were submerged in methylene blue 0.5% to test for microleakage. The Kruskal-Wallis and Student-Newman-Keuls tests were used to assess results.

RESULTS

On immediate assessment, there were no significant between-group differences in the sound dentin group, whereas in carious dentin, there was less leakage when OB and CLX were used. At 6 months, there was less leakage in the sound dentin group when OB and CLX were used; there were no between-group differences in carious dentin. Comparison of immediate and 6-month assessments showed a significant increase in leakage at 6 months when sound dentin was treated with SE and CLX and when carious dentin was treated with OB and CLX.

CONCLUSION

To ensure better dentin hybridization and preservation of the organic constituents of the dentin matrix, the properties of chlorhexidine digluconate and the components of the resin matrix must be taken into account.

CLINICAL SIGNIFICANCE

Metalloproteinases influence degradation of the hybrid layer in composite resin restorations, regardless of whether the bonding system used is one-bottle or self-etching.

The effect of mouthwashes containing biguanides on the progression of erosion in dentin

BACKGROUND

Dental erosion is caused by frequent exposure to acids without the involvement of microorganism. This study analyzed the effect of biguanides (polyhexamethylene biguanide - PHMB and chlorhexidine - CHX) on dentin erosion due to their possible influence on the enzymatic degradation of the demineralized organic matrix.

METHOD

Sixty bovine dentin specimens were prepared. On both sides of their surface, nail varnish was applied to maintain the reference surfaces for the determination of dentin loss. Samples were cyclically de- and remineralized for 6 days. Demineralization was performed with a 0.87 M citric acid solution (6×5 min daily). Thereafter, samples were treated with distilled water (negative control), 0.12% CHX (positive control), 0.07% PHMB, Sanifill Perio Premium™ (0.07% PHMB plus 0.05% NaF), or F solution (0.05% NaF) for 1 min and then subjected to enzymatic challenge for 10 min using a bacterial collagenase (Clostridium hystoliticum, 100 μg/ml). Dentin loss was assessed using profilometry (μm) daily. Data were analyzed using 2-way repeated measures-ANOVA and Bonferroni's test (p < 0.05).

RESULTS

Dentin loss progressed significantly for all groups during the 6 days. After the 3rd day, Sanifill Premium™, CHX, and PHMB significantly reduced dentin erosion compared to control. On the 6th day, the lowest mean (±SD) dentin loss was observed for Sanifill Perio Premium™ (94.4 ± 3.9 μm). PHMB and CHX led to intermediate dentin loss (129.9 ± 41.2 and 135.3 ± 33.5 μm, respectively) that was significantly lower than those found for negative control (168.2 ± 6.2 μm). F (157.4 ± 6.1 μm) did not significantly differ from negative control.

CONCLUSIONS

Sanifill Perio Premium™ mouthwash has a good potential to reduce dentin loss, which might be associated with the presence of PHMB.