Adaptation of Pseudomonas sp. AKS2 in biofilm on low-density polyethylene surface: an effective strategy for efficient survival and polymer degradation

Current paradigms and future challenges in harnessing gut bacterial symbionts of insects for biodegradation of plastic wastes

The ubiquitous incorporation of plastics into daily life, coupled with inefficient recycling practices, has resulted in the accumulation of millions of metric tons of plastic waste, that poses a serious threat to the Earth's sustainability. Plastic pollution, a global problem, disrupts the ecological balance and endangers various life forms. Efforts to combat plastic pollution are underway, with a promising avenue being biological degradation facilitated by certain insects and their symbiotic gut microorganisms, particularly bacteria. This review consolidates existing knowledge on plastic degradation by insects and their influence on gut microbiota. Additionally, it delves into the potential mechanisms employed by insects in symbiosis with gut bacteria, exploring the bioconversion of waste plastics into value-added biodegradable polymers through mineralization. These insights hold significant promise for the bio-upcycling of plastic waste, opening new horizons for future biomanufacturing of high-value chemicals from plastic-derived compounds. Finally, we weigh the pros and cons of future research endeavors related to the bioprospection of plastic-degrading bacteria from underexplored insect species. We also underscore the importance of bioengineering depolymerases with novel characteristics, aiming for their application in the remediation and valorization of waste plastics.

Biodeterioration of polyethylene by Bacillus cereus and Rhodococcus equi isolated from soil

Polyethylene (PE), a non-biodegradable plastic, is widely used in agriculture as a mulch material, which causes serious plastic pollution when it is discarded. Recent studies have described the biodeterioration of PE by bacteria, but it is difficult for a single bacterial species to effectively degrade PE plastic. We isolated two strains with PE-degrading ability, Bacillus cereus (E1) and Rhodococcus equi (E3), from the soil attached to plastic waste on the south side of Mount Tai, China, using a medium with PE plastic as the only carbon source. By clear zone area analysis, we found that E1 mixed with E3 could improve the degradation of PE plastics. The mixture of E1 and E3 was incubated for 110 days in a medium containing PE and mulch film as the only carbon source, respectively. After 110 days, a decrease in pH and mass was observed. Obvious slits and depressions were observed on the surface of the PE film and the mulch films using scanning electron microscopy. The surface hydrophobicity of both films decreased, and FTIR revealed the formation of new oxidation groups on their surfaces during the degradation process and the destruction of the original CH2 long chains of PE. Besides, we found that surface of the mulch films contained more viable bacteria than the liquid medium. In conclusion, we identified two PE-degrading strains whose mixture can effectively degrade mulch film than pure PE film. Our results provide a reference for understanding PE plastic degradation pathways and their associated degradation processes.

Piperine, a Plant Alkaloid, Exhibits Efficient Disintegration of the Pre-existing Biofilm of Staphylococcus aureus: a Step Towards Effective Management of Biofilm Threats

Staphylococcus aureus causes a range of chronic infections in humans by exploiting its biofilm machinery and drug-tolerance property. Although several strategies have been proposed to eradicate biofilm-linked issues, here, we have explored whether piperine, a bioactive plant alkaloid, can disintegrate an already existing Staphylococcal biofilm. Towards this direction, the cells of S. aureus were allowed to develop biofilm first followed by treatment with the test concentrations (8 and 16 µg/mL) of piperine. In this connection, several assays such as total protein recovery assay, crystal violet assay, extracellular polymeric substances (EPS) measurement assay, fluorescein diacetate hydrolysis assay, and fluorescence microscopic image analysis confirmed the biofilm-disintegrating property of piperine against S. aureus. Piperine reduced the cellular auto-aggregation by decreasing the cell surface hydrophobicity. On further investigation, we observed that piperine could down regulate the dltA gene expression that might reduce the cell surface hydrophobicity of S. aureus. It was also observed that the piperine-induced accumulation of reactive oxygen species (ROS) could enhance biofilm disintegration by decreasing the cell surface hydrophobicity of the test organism. Together, all the observations suggested that piperine could be used as a potential molecule for the effective management of the pre-existing biofilm of S. aureus.

Biodegradation of low-density polyethylene by plasma-activated Bacillus strain

Plastic biodegradation by microorganisms is an eco-friendly and sustainable method without any ramifications. Herein, we used a cultivation method and 16S rRNA sequencing to screen bacteria that can efficiently colonize and degrade low-density polyethylene (LDPE) from various plastic wastes. We identified Bacillus safensis BS-10L through whole-genome sequencing analysis and verified its LDPE-degradation ability. However, the decomposition mechanism of the isolated bacteria was unclear and the decomposition efficiency was insufficient, so low-temperature plasma was used to increase the decomposition efficiency of the bacteria. The population and viability of bacteria treated with cold plasma increased. Plasma-activated bacteria could induce cracks, holes, and roughness on the surface of LDPE films over 90 days, and over 30 days; the LDPE film lost 13.40 ± 0.013% and 27.78 ± 0.014% of its mass by BS-10L and plasma-treated BS-10L, respectively. Fourier-transform infrared spectroscopic analysis identified new peaks of the C=O and C-O groups in the plasma-treated LDPE film, exhibiting high transmittance in the LDPE film that was inoculated with bacteria. X-ray photoelectron spectroscopic analysis showed that C-O bonds were generated by BS-10L strain, and relatively strong C=O bonds were generated in the film inoculated with plasma-treated BS-10L strain. Plasma treatment increased the colonization of the BS-10L strain and changed the chemical bonding of the LDPE film, suggesting that plasma-activated BS-10L could accelerate decomposition by oxidation by increasing the carbonyl group of the PE film. Therefore, plasma technology may be effective for enhancing the plastic-degrading ability of microorganisms.

The combinatorial applications of 1,4-naphthoquinone and tryptophan inhibit the biofilm formation of Staphylococcus aureus

Microorganisms embedded within an extracellular polymeric matrix are known as biofilm. The extensive use of antibiotics to overcome the biofilm-linked challenges has led to the emergence of multidrug-resistant strains. Staphylococcus aureus is one such nosocomial pathogen that is known to cause biofilm-linked infections. Thus, novel strategies have been adopted in this study to inhibit the biofilm formation of S. aureus. Two natural compounds, namely, 1,4-naphthoquinone (a quinone derivative) and tryptophan (aromatic amino acid), have been chosen as they could independently show efficient antibiofilm activity. To enhance the antibiofilm potential, the two compounds were combined and tested against the same organism. Several experiments like crystal violet (CV) assay, protein estimation, extracellular polymeric substance (EPS) extraction, and estimation of metabolic activity confirmed that the combination of the two compounds could significantly inhibit the biofilm formation of S. aureus. To comprehend the underlying mechanism, efforts were further directed to understand whether the two compounds could inhibit biofilm formation by compromising the cell surface hydrophobicity of the bacteria. The results revealed that the cell surface hydrophobicity got reduced by ~ 49% when the compounds were applied together. Thus, the combinations could show enhanced antibiofilm activity by attenuating cell surface hydrophobicity. Further studies revealed that the selected concentrations of the compounds could disintegrate (~ 70%) the pre-existing biofilm of the test bacteria without showing any antimicrobial activity. Hence, the combined application of tryptophan and 1,4-naphthoquinone could be used to inhibit the biofilm threats of S. aureus.

Recent advances in biodegradation of emerging contaminants - microplastics (MPs): Feasibility, mechanism, and future prospects

Plastics have become an essential part of life. When it enters the environment, it migrates and breaks down to form smaller size fragments, which are called microplastics (MPs). Compared with plastics, MPs are detrimental to the environment and pose a severe threat to human health. Bioremediation is being recognized as the most environmentally friendly and cost-effective degradation technology for MPs, but knowledge about the biodegradation of MPs is limited. This review explores the various sources of MPs and their migration behavior in terrestrial and aquatic environments. Among the existing MPs removal technologies, biodegradation is considered to be the best removal strategy to alleviate MPs pollution. The biodegradation potential of MPs by bacteria, fungi and algae is discussed. Biodegradation mechanisms such as colonization, fragmentation, assimilation, and mineralization are presented. The effects of MPs characteristics, microbial activity, environmental factors and chemical reagents on biodegradation are analyzed. The susceptibility of microorganisms to MPs toxicity might lead to decreased degradation efficiency, which is also elaborated. The prospects and challenges of biodegradation technologies are discussed. Eliminating prospective bottlenecks is necessary to achieve large-scale bioremediation of MPs-polluted environment. This review provides a comprehensive summary of the biodegradability of MPs, which is crucial for the prudent management of plastic waste.

The escalated potential of the novel isolate Bacillus cereus NJD1 for effective biodegradation of LDPE films without pre-treatment

This study focused on the biodegradation of LDPE films using a novel isolate of Bacillus obtained from soil samples collected from a 20-year-old plastic waste dump. The aim was to evaluate the biodegradability of LDPE films treated with this bacterial isolate. The results indicated a 43% weight loss of LDPE films within 120 days of treatment. The biodegradability of LDPE films was confirmed through various testing methods, including BATH, FDA, CO₂ evolution tests, and changes in total cell growth count, protein content, viability, p^H of the medium, and release of microplastics. The bacterial enzymes, including laccases, lipases, and proteases, were also identified. SEM analysis revealed biofilm formation and surface changes in treated LDPE films, while EDAX analysis showed a reduction in carbon elements. AFM analysis demonstrated differences in roughness compared to the control. Furthermore, wettability increased and tensile strength decreased, confirming the biodegradation of the isolate. FTIR spectral analysis showed changes in skeletal vibrations, such as stretches and bends, in the linear structure of polyethylene. FTIR imaging and GC-MS analysis also confirmed the biodegradation of LDPE films by the novel isolate identified as Bacillus cereus strain NJD1. The study highlights the potentiality of the bacterial isolate for safe and effective microbial remediation of LDPE films.

New insights into the effects of antibiotics and copper on microbial community diversity and carbon source utilization

Residual antibiotics (ABs) and heavy metals (HMs) are continuously released from soil, reflecting their intensive use and contamination of water and soil, posing an environmental problem of great concern. Relatively few studies exist of the functional diversity of soil microorganisms under the combined action of ABs and HMs. To address this deficiency, BIOLOG ECO microplates and the Integrated Biological Responses version 2 (IBRv2) method were used to comprehensively explore the effects of single and combined actions of copper (Cu) and enrofloxacin (ENR), oxytetracycline (OTC), and sulfadimidine (SM2) on the soil microbial community. The results showed that the high concentration (0.80 mmol/kg) compound group had a significant effect on average well color development (AWCD) and OTC showed a dose-response relationship. The results of IBRv2 analysis showed that the single treatment group of ENR or SM2 had a significant effect on soil microbial communities, and the IBRv2 of E1 was 5.432. Microbes under ENR, SM2, and Cu stress had more types of available carbon sources, and all treatment groups were significantly more enriched with microorganisms having D-mannitol and L-asparagine as carbon sources. This study confirms that the combined effects of ABs and HMs can inhibit or promote the function of soil microbial communities. In addition, this paper will provide new insights into IBRv2 as an effective method to evaluate the impacts of contaminants on soil health.

Growth and prevalence of antibiotic-resistant bacteria in microplastic biofilm from wastewater treatment plant effluents

It is accepted that Microplastic (MP) biofilms accumulates antibiotic-resistant bacteria (ARB) and antibiotic-resistant genes (ARGs) in water. ARB/ARGs and MPs are emerging pollutants of concern due to various associated health risks. The objective of this study was to 1) investigate the ARB community in a pilot-scale wastewater treatment plant (WWTP) effluent, 2) to study and visualize the ARB/ARGs in MP biofilm grown in WWTP effluent and tap water, and 3) to analyze microplastic adherent ARB/ARGs in the biofilm and planktonic ARB/ARGs in the filtrate under controlled conditions. Results indicated the dominance of Pseudomonas, Aeromonas, and Bacillus among isolated ARB in WWTP effluent. Representative resistance strains were incubated in 300 mL water containing commercial polystyrene beads of 300550 μm diameter (MP) in a series of batch experiments. Microbiological, molecular, and microscopic analyses were performed by enumeration, 16srRNA, real-time polymerase chain reaction (qPCR), and Field Emission-Scanning Electron Microscopy (FEG-SEM) techniques. The analyzed viable ARB indicated an increasing trend in MP biofilms between days 3 and 5. It further decreased on days 7 and 9. The prevalence of ARB in the filtrate and MP biofilm varied as a function of time and TOC level, while no significant impacts were observed for minor temperature variation, low antibiotic pressure, and increased MP mass with few exceptions. Relative abundance of ARGs (vanA, sul1) and integron integrase gene (intl1) in MP biofilm were significantly different across different TOC levels, time, and antibiotic pressure. ARGs and intl1 were detected in the MP biofilm in tap water and WWTP effluent on day 30.

Construction of microbial consortia for microbial degradation of complex compounds

Increasingly complex synthetic environmental pollutants are prompting further research into bioremediation, which is one of the most economical and safest means of environmental restoration. From the current research, using microbial consortia to degrade complex compounds is more advantageous compared to using isolated bacteria, as the former is more adaptable and stable within the growth environment and can provide a suitable catalytic environment for each enzyme required by the biodegradation pathway. With the development of synthetic biology and gene-editing tools, artificial microbial consortia systems can be designed to be more efficient, stable, and robust, and they can be used to produce high-value-added products with their strong degradation ability. Furthermore, microbial consortia systems are shown to be promising in the degradation of complex compounds. In this review, the strategies for constructing stable and robust microbial consortia are discussed. The current advances in the degradation of complex compounds by microbial consortia are also classified and detailed, including plastics, petroleum, antibiotics, azo dyes, and some pollutants present in sewage. Thus, this paper aims to support some helps to those who focus on the degradation of complex compounds by microbial consortia.

Cloning, expression and characterization of PURase gene from Pseudomonas sp. AKS31

Polyurethane (PUR) is a soil and aquatic contaminant throughout the world. Towards bioremediation, in a previous study, a soil bacterium, Pseudomonas sp. AKS31, capable of efficiently degrading PUR was isolated. Polyurethanase (PURase) enzyme is capable of cleaving the ester bond of PUR and is considered as a key regulator of PUR biodegradation. Hence, for a high yield, easy purification, and further characterization, the aim of this study was to clone and overexpress the PURase gene of this isolate. The current study also investigated structural aspects of this enzyme through predictive bioinformatics analyses. In this context, the PURase gene of the isolate was cloned and expressed in E. coli using pET28(a)⁺ vector. The obtained recombinant protein was found insoluble. Therefore, first, the protein was made soluble with urea and purified using nickel-NTA beads. The purified enzyme exhibited substantial activities when tested on the LA-PUR plate. Bioinformatics-based analysis of the protein revealed the presence of a lipase serine active site and indicated that this PURase belongs to the Family 1.3 lipase. Hence, the present study shows that active PURase can be produced in large quantities using a prokaryotic expression system and thus, provides an effective strategy for in-vitro PUR-degradation.

Mitigation of carbon steel biocorrosion using a green biocide enhanced by a nature-mimicking anti-biofilm peptide in a flow loop

Biocorrosion, also called microbiologically influenced corrosion (MIC), is a common operational threat to many industrial processes. It threatens carbon steel, stainless steel and many other metals. In the bioprocessing industry, reactor vessels in biomass processing and bioleaching are prone to MIC. MIC is caused by biofilms. The formation and morphology of biofilms can be impacted by fluid flow. Fluid velocity affects biocide distribution and MIC. Thus, assessing the efficacy of a biocide for the mitigation of MIC under flow condition is desired before a field trial. In this work, a benchtop closed flow loop bioreactor design was used to investigate the biocide mitigation of MIC of C1018 carbon steel at 25 °C for 7 days using enriched artificial seawater. An oilfield biofilm consortium was analyzed using metagenomics. The biofilm consortium was grown anaerobically in the flow loop which had a holding vessel for the culture medium and a chamber to hold C1018 carbon steel coupons. Peptide A (codename) was a chemically synthesized cyclic 14-mer (cys-ser-val-pro-tyr-asp-tyr-asn-trp-tyr-ser-asn-trp-cys) with its core 12-mer sequence originated from a biofilm dispersing protein secreted by a sea anemone which possesses a biofilm-free exterior. It was used as a biocide enhancer. The combination of 50 ppm (w/w) THPS (tetrakis hydroxymethyl phosphonium sulfate) biocide + 100 nM (180 ppb by mass) Peptide A resulted in extra 1-log reduction in the sulfate reducing bacteria (SRB) sessile cell count and the acid producing bacteria (APB) sessile cell count compared to 50 ppm THPS alone treatment. Furthermore, with the enhancement of 100 nM Peptide A, extra 44% reduction in weight loss and 36% abatement in corrosion pit depth were achieved compared to 50 ppm THPS alone treatment.

Biodegradation of polyethylene and polystyrene: From microbial deterioration to enzyme discovery

The global production of plastics has continuously been soaring over the last decades due to their extensive use in our daily life and in industries. Although synthetic plastics offer great advantages from packaging to construction and electronics, their low biodegradability induce serious plastic pollution that damage the environment, human health and make irreversible changes in the ecological cycle. In particular, plastics containing only carbon-carbon (C-C) backbone are less susceptible to degradation due to the lack of hydrolysable groups. The representative polyethylene (PE) and polystyrene (PS) account for about 40% of the total plastic production. Various chemical and biological processes with great potential have been developed for plastic recycle and reuse, but biodegradation seems to be the most attractive and eco-friendly method to combat this growing environmental problem. In this review, we first summarize the current advances in PE and PS biodegradation, including isolation of microbes and potential degrading enzymes from different sources. Next, the state-of-the-art techniques used for evaluating and monitoring PE and PS degradation, the scientific toolboxes for enzyme discovery as well as the challenges and strategies for plastic biodegradation are intensively discussed. In return, it inspires a further technological exploration in expanding the diversity of species and enzymes, disclosing the essential pathways and developing new approaches to utilize plastic waste as feedstock for recycling and upcycling.

Characterization of Polymer Degrading Lipases, LIP1 and LIP2 From Pseudomonas chlororaphis PA23

The outstanding metabolic and bioprotective properties of the bacterial genus Pseudomonas make these species a potentially interesting source for the search of hydrolytic activities that could be useful for the degradation of plastics. We identified two genes encoding the intracellular lipases LIP1 and LIP2 of the biocontrol bacterium Pseudomonas chlororaphis PA23 and subsequently performed cloning and expression in Escherichia coli. The lip1 gene has an open reading frame of 828 bp and encodes a protein of 29.7 kDa whereas the lip2 consists of 834 bp and has a protein of 30.2 kDa. Although secondary structure analyses of LIP1 and LIP2 indicate a dominant α/β-hydrolase-fold, the two proteins differ widely in their amino acid sequences (15.39% identity), substrate specificities, and hydrolysis rates. Homology modeling indicates the catalytic serine in both enzymes located in a GXSXG sequence motif (lipase box). However, LIP1 has a catalytic triad of Ser152-His253-Glu221 with a GGX-type oxyanion pocket, whereas LIP2 has Ser138-His249-Asp221 in its active site and a GX-type of oxyanion hole residues. However, LIP1 has a catalytic triad of Ser152-His253-Glu221 with an oxyanion pocket of GGX-type, whereas LIP2 has Ser138-His249-Asp221 in its active site and a GX-type of oxyanion hole residues. Our three-dimensional models of LIP1 and LIP2 complexed with a 3-hydroxyoctanoate dimer revealed the core α/β hydrolase-type domain with an exposed substrate binding pocket in LIP1 and an active-site capped with a closing lid domain in LIP2. The recombinant LIP1 was optimally active at 45°C and pH 9.0, and the activity improved in the presence of Ca²⁺. LIP2 exhibited maximum activity at 40°C and pH 8.0, and was unaffected by Ca²⁺. Despite different properties, the enzymes exhibited broadsubstrate specificity and were able to hydrolyze short chain length and medium chain length polyhydroxyalkanoates (PHAs), polylactic acid (PLA), and para-nitrophenyl (pNP) alkanoates. Gel Permeation Chromatography (GPC) analysis showed a decrease in the molecular weight of the polymers after incubation with LIP1 and LIP2. The enzymes also manifested some polymer-degrading activity on petroleum-based polymers such as poly(ε-caprolactone) (PCL) and polyethylene succinate (PES), suggesting that these enzymes could be useful for biodegradation of synthetic polyester plastics. The study will be the first report of the complete characterization of intracellular lipases from bacterial and/or Pseudomonas species. The lipases, LIP1 and LIP2 are different from other bacterial lipases/esterases in having broad substrate specificity for polyesters.

A review on per- and polyfluorinated alkyl substances (PFASs) in microplastic and food-contact materials

Plastic, paper and cardboard are widely used as food contact materials (FCMs), due to its numerous favourable characteristics. However, they are usually coated with hazardous substances, such as per- and polyfluorinated alkyl substances (PFASs). PFASs, with its functional properties of oil- and water-repellency, can migrate from FCMs into the food and cause potential risk to human health. There are also increasing concerns about the harm that FCMs can cause to the environment. These concerns include accumulation of non-degradable plastics in the environment, generation of microplastics (MPs) and nanoplastics, and release of PFASs from FCMs. While many reviews have been conducted on PFASs in the environment, including their occurrence, fate, toxicity, biodegradation, migration in ecosystems and remediation technologies, a systematic review of PFASs in FCMs and MPs is currently lacking. In addition, our knowledge of the PFAS sorption processes on MPs is rather limited, and in particular their desorption processes. Thus, this review aims to (1) review the presence of various classes of PFASs in FCMs and their migration into food, (2) review the PFASs in MPs and summarize the sorption mechanisms, and factors that influence their sorption behaviour on MPs in the aquatic environment, and (3) identify the current research gaps and future research directions to predict the risks associated with the presence and sorption of PFASs in FCMs and MPs.

Extracellular degradation of a polyurethane oligomer involving outer membrane vesicles and further insights on the degradation of 2,4-diaminotoluene in Pseudomonas capeferrum TDA1

The continuing reports of plastic pollution in various ecosystems highlight the threat posed by the ever-increasing consumption of synthetic polymers. Therefore, Pseudomonas capeferrum TDA1, a strain recently isolated from a plastic dump site, was examined further regarding its ability to degrade polyurethane (PU) compounds. The previously reported degradation pathway for 2,4-toluene diamine, a precursor and degradation intermediate of PU, could be confirmed by RNA-seq in this organism. In addition, different cell fractions of cells grown on a PU oligomer were tested for extracellular hydrolytic activity using a standard assay. Strikingly, purified outer membrane vesicles (OMV) of P. capeferrum TDA1 grown on a PU oligomer showed higher esterase activity than cell pellets. Hydrolases in the OMV fraction possibly involved in extracellular PU degradation were identified by mass spectrometry. On this basis, we propose a model for extracellular degradation of polyester-based PUs by P. capeferrum TDA1 involving the role of OMVs in synthetic polymer degradation.

Bioaugmentation of Enterobacter cloacae AKS7 causes an enhanced degradation of low-density polyethylene (LDPE) in soil: a promising approach for the sustainable management of LDPE waste

Enterobacter cloacae AKS7 was previously reported to degrade UV-treated low-density polyethylene (LDPE) more efficiently than UV-untreated LDPE. However, the degradation of LDPE by Enterobacter cloacae AKS7 at the LDPE-contaminated soil remained unaddressed. To address this issue, soil microcosms were prepared in which an equal amount of either UV-treated or UV-untreated LDPE was added. Then, the microcosms were either augmented with AKS7 or left non-augmented. We observed that the bioaugmented microcosms exhibited approximately twofold greater polymer degradation than non-bioaugmented microcosms. To investigate the underlying cause, we found that the abundance of LDPE-degrading organisms got increased by approximately fivefold in bioaugmented microcosms than non-bioaugmented microcosms. The microbial biomass carbon and nitrogen content got enhanced by approximately twofold in bioaugmented microcosms as contrasted to non-bioaugmented microcosms. Furthermore, the bioaugmented microcosms showed almost twofold increase in the level of dehydrogenase and fluorescein diacetate (FDA) hydrolyzing activity than the non-bioaugmented microcosms. To add on, Shannon-diversity index and Gini coefficient were determined in each microcosm to measure the microbial richness and evenness, respectively, using the results of carbon source utilization pattern of BiOLOG ECO plate. The bioaugmented microcosms exhibited ~ 30% higher functional richness and ~ 30% enhanced functional evenness than the non-bioaugmented microcosms indicating the formation of an enriched ecosystem that could offer various functions including polymer degradation. Taken together, the results suggested that Enterobacter cloacae AKS7 could be used as a promising bioaugmenting agent for the sustainable degradation of LDPE waste at a contaminated site.

Biofilm-Developed Microplastics As Vectors of Pollutants in Aquatic Environments

Microplastics are a big and growing part of global pollution, which has aroused increasing concern in recent years because of their large amount, wide distribution, and adverse effects. Microplastics can sorb various pollutants from aquatic environments and act as vectors of pollutants. Most studies mainly focused on the virgin microplastics. However, microplastics in environments can be easily colonized by microorganisms, and form biofilm, which will influence the behaviors and potential risks of microplastics. The formation of biofilm on microplastics and its effects on their properties have been studied before, but their sorption and transport behaviors, and potential risks for pollutants' transfer have not been reviewed. In this paper, the role of biofilm-developed microplastics as vectors of pollutants was thoroughly analyzed and summarized. First, the formation of biofilm on microplastics, the compositions of microorganisms in biofilm, the influencing factors, and the property changes of microplastics after biofilm attachment are thoroughly reviewed. Second, the sorption of pollutants onto biofilm-developed microplastics is discussed. Third, the role of biofilm-developed microplastics as vector of pollutants are analyzed. We concluded that microplastics could provide unique substrates for microorganisms. Biofilm-developed microplastics can sorb more pollutants than the virgin ones, then act as vectors to introduce pollutants and attached microorganisms to aquatic environments and to organisms.

Tryptophan interferes with the quorum sensing and cell surface hydrophobicity of Staphylococcus aureus: a promising approach to inhibit the biofilm development

Staphylococcus aureus, a Gram-positive bacterium has been implicated in a plethora of human infections by virtue of its biofilm-forming ability. Inhibition in microbial biofilm formation has been found to be a promising approach towards compromising microbial pathogenesis. In this regard, various natural and synthetic molecules have been explored to attenuate microbial biofilm. In this study, the role of an amino acid, L-tryptophan was examined against the biofilm-forming ability of S. aureus. The compound did not execute any antimicrobial characteristics, instead, showed strong antibiofilm activity with the highest biofilm inhibition at a concentration of 50 µg/mL. Towards understanding the underlying mechanism of the same, efforts were given to examine whether tryptophan could inhibit biofilm formation by interfering with the quorum-sensing property of S. aureus. A molecular docking analysis revealed an efficient binding between the quorum-sensing protein, AgrA, and tryptophan. Moreover, the expression of the quorum-sensing gene (agrA) got significantly reduced under the influence of the test compound. These results indicated that tryptophan could interfere with the quorum-sensing property of the organism thereby inhibiting its biofilm formation. Further study revealed that tryptophan could also reduce the cell surface hydrophobicity of S. aureus by downregulating the expression of dltA. Moreover, the tested concentrations of tryptophan did not show any significant cytotoxicity. Hence, tryptophan could be recommended as a potential antibiofilm agent to manage the biofilm-associated infections caused by S. aureus.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02924-3.

Biodegradation of used polyethylene bags by a new marine strain of Alcaligenes faecalis LNDR-1

Disposable plastic bags of two different chemical compositions and colors were remediated by the application of novel mesophilic group of bacteria isolated from the banks of sea water, using a 10 week soil burial method. The new strain, LNDR-1, was identified as Alcaligens faecalis by its morphological features and 16S rRNA sequencing. LNDR-1 was able to produce extracellular enzymes such as lipase, CMCase, xylanase, and protease, having PET surface degrading activity. It was found that LNDR-1 had a better decay rate of 15.25 ± 1% and 21.72 ± 2.1% for black and white plastic bags respectively in 10 weeks without prior oxidation as compared to S. marcescens. Polyethylene degradation was confirmed by substantial weight loss, alterations in surface topology, and hydrophobicity index and was found to be directly proportional to the ability to form biofilm on the plastic surface. FTIR results suggest presence of different metabolites in the bags treated with bacterial biofilm in comparison to the control setup inferring various types of metabolic pathways. Present study also reveals the ability of the strain to utilize the used polyethylene bag as the carbon source, without any prior treatment, and as per the literature survey, the working strain is with the capacity to biodegrade plastic at a considerably appreciable rate. This study suggests effectual method for the mechanism of biodegradation of plastic mediated by extracellular enzymes and formation of biofilm.

1,4-Naphthoquinone disintegrates the pre-existing biofilm of Staphylococcus aureus by accumulating reactive oxygen species

Staphylococcus aureus causes several nosocomial and community-acquired infections in human host involving biofilm. Thus, strategies need to be explored to curb biofilm threats by either inhibiting the formation of biofilm or disintegrating the pre-existing biofilm. Towards this direction, we had already revealed the biofilm inhibiting properties of 1,4-naphthoquinone against S. aureus. In this study, we have investigated whether this compound can act on pre-existing biofilm. Hence, biofilm of S. aureus was developed first and challenged further with 1,4-naphthoquinone. Experiments such as crystal violet assay, fluorescence microscopy, and estimation of total biofilm protein were performed to confirm the biofilm disintegration properties of 1,4-naphthoquinone. The disintegration of pre-existing biofilm could be attributed to the generation of reactive oxygen species (ROS). To investigate further, we observed that extracellular DNA (eDNA) was found to play an important role in holding the biofilm network as DNaseI treatment could cause an efficient disintegration of the same. To examine the effect of ROS on the eDNA, we exposed pre-existing biofilm to either 1,4-naphthoquinone or a combination of both 1,4-naphthoquinone and ascorbic acid for different length of time. Post-incubation, ROS generation and the amount of eDNA associated with the biofilm were determined wherein an inversely proportional relationship was observed between them. The result indicated that with the increase of ROS generation, the amount of eDNA associated with biofilm got decreased substantially. Thus, the results indicated that the generation of ROS could degrade the eDNA thereby compromising the integrity of biofilm which lead to the disintegration of pre-existing biofilm.

Exploration of Strategies for the Enhanced Biodegradation of Low-Density Polyethylene (LDPE) by A Soil Bacterium Enterobacter Cloacae AKS7

In the context of sustainable bioremediation of Low-density polyethylene (LDPE), in this study, several strategies were explored to enhance the LDPE degradation by the bacterium Enterobacter cloacae AKS7. Initially, Mineral oil and Tween 80 were used to test whether they could modulate microbial colonization and polymer degradation by AKS7. Results indicated Mineral oil could increase microbial colonization and LDPE degradation whereas Tween 80 compromised the same. Since LDPE holds hydrophobic characteristics, the organism showing higher cell-surface hydrophobicity could adhere efficiently to the polymer. Thus, the organism AKS7 was grown in media with different concentrations of glucose and ammonium sulphate to exhibit differences in cell-surface hydrophobicity. We noticed that with increasing cell-surface hydrophobicity, the microbial colonization and LDPE degradation got enhanced considerably. The observations indicated that cell-surface hydrophobicity promoted microbial colonization to LDPE that increased the degree of biodegradation. Besides, LDPE films were photo-oxidized before microbial exposure which showed that AKS7 could degrade ultra-violet (UV) treated LDPE more proficiently compared to the UV-untreated polymer. Moreover, AKS7 could colonize more effectively to the UV-treated LDPE in contrast to the untreated LDPE. Furthermore, it was observed that UV exposure increased the carbonyl bond index of the polymer which got utilized by the organism efficiently thereby increasing the polymer degradation. Hence, the observations indicated that effective microbial colonization to UV-treated LDPE films exhibited a promising metabolic activity that could show an enhanced degradation of LDPE. Therefore, AKS7 warrants to be considered as a promising organism for enhanced degradation of LDPE.

Microplastics with adsorbed contaminants: Mechanisms and Treatment

Plastic pollution has been a significant and widespread global issue, and the recent COVID-19 pandemic has been attributed to its worsening effect as plastics have been contaminated with the deadly infectious virus. Microplastics (MPs) may have played a role as a vector that carries hazardous microbes such as emerging bacterial threats (i.e. antibiotic resistant bacteria) and deadly viruses (e.g., coronavirus); this causes great concern over microplastics contaminated with emerging contaminants. Mitigation and treatment of MPs are challenging because of a range of factors including but not limited to physicochemical properties and composition of MPs and pH and salinity of the solution. Despite the heterogeneous nature of aquatic systems, research has overlooked interactions between contaminants and MPs under environmental conditions, degradation pathways of MPs with adsorbed contaminants, and, especially, the role of adsorbed contaminants in the efficiency of MP treatment through membrane filtration, in comparison with other treatment methods. This review aims to (1) analyze an assortment of factors that could influence the removal of MPs and mechanisms of contaminant adsorption on MPs, (2) identify mechanisms influencing membrane filtration of MPs, (3) examine the fate and transport of MPs with adsorbed contaminants, (4) evaluate membrane filtration of contaminant-adsorbing MPs in comparison to other treatment methods, and (5) draw conclusions and the future outlook based on a literature analysis.

Riverine microplastic and microbial community compositions: A field study in the Netherlands

Plastic pollution in aquatic environments, particularly microplastics (<5 mm), is an emerging health threat. The buoyancy, hydrophobic hard surfaces, novel polymer carbon sources and long-distance transport make microplastics a unique substrate for biofilms, potentially harbouring pathogens and enabling antimicrobial resistance (AMR) gene exchange. Microplastic concentrations, their polymer types and the associated microbial communities were determined in paired, contemporaneous samples from the Dutch portion of the river Rhine. Microplastics were collected through a cascade of 500/100/10 μm sieves; filtrates and surface water were also analysed. Microplastics were characterized with infrared spectroscopy. Microbial communities and selected virulence and AMR genes were determined with 16S rRNA-sequencing and qPCR. Average microplastic concentration was 213,147 particles/m³; polyamide and polyvinylchloride were the most abundant polymers. Microbial composition on 100-500 μm samples differed significantly from surface water and 10-100 μm or smaller samples, with lower microbial diversity compared to surface water. An increasingly 'water-like' microbial community was observed as particles became smaller. Associations amongst specific microbial taxa, polymer types and particle sizes, as well as seasonal and methodological effects, were also observed. Known biofilm-forming and plastic-degrading taxa (e.g. Pseudomonas) and taxa harbouring potential pathogens (Pseudomonas, Acinetobacter, Arcobacter) were enriched in certain sample types, and other risk-conferring signatures like the sul1 and erm(B) AMR genes were almost ubiquitous. Results were generally compatible with the existence of taxon-selecting mechanisms and reduced microbial diversity in the biofilms of plastic substrates, varying over seasons, polymer types and particle sizes. This study provided updated field data and insights on microplastic pollution in a major riverine environment.

Plastic biodegradation: Frontline microbes and their enzymes

Plastic polymers with different properties have been developed in the last 150 years to replace materials such as wood, glass and metals across various applications. Nevertheless, the distinct properties which make plastic desirable for our daily use also threaten our planet's sustainability. Plastics are resilient, non-reactive and most importantly, non-biodegradable. Hence, there has been an exponential increase in plastic waste generation, which has since been recognised as a global environmental threat. Plastic wastes have adversely affected life on earth, primarily through their undesirable accumulation in landfills, leaching into the soil, increased greenhouse gas emission, etc. Even more damaging is their impact on the aquatic ecosystems as they cause entanglement, ingestion and intestinal blockage in aquatic animals. Furthermore, plastics, especially in the microplastic form, have also been found to interfere with chemical interaction between marine organisms, to cause intrinsic toxicity by leaching, and by absorbing persistent organic contaminants as well as pathogens. The current methods for eliminating these wastes (incineration, landfilling, and recycling) come at massive costs, are unsustainable, and put more burden on our environment. Thus, recent focus has been placed more on the potential of biological systems to degrade synthetic plastics. In this regard, some insects, bacteria and fungi have been shown to ingest these polymers and convert them into environmentally friendly carbon compounds. Hence, in the light of recent literature, this review emphasises the multifaceted roles played by microorganisms in this process. The current understanding of the roles played by actinomycetes, algae, bacteria, fungi and their enzymes in enhancing the degradation of synthetic plastics are reviewed, with special focus on their modes of action and probable enzymatic mechanisms. Besides, key areas for further exploration, such as the manipulation of microorganisms through molecular cloning, modification of enzymatic characteristics and metabolic pathway design, are also highlighted.

Wastewater treatment alters microbial colonization of microplastics

Microplastics are ubiquitous contaminants in aquatic habitats globally, and wastewater treatment plants (WWTPs) are point sources of microplastics. Within aquatic habitats microplastics are colonized by microbial biofilms, which can include pathogenic taxa and taxa associated with plastic breakdown. Microplastics enter WWTPs in sewage and exit in sludge or effluent, but the role that WWTPs play in establishing or modifying microplastic bacterial assemblages is unknown. We analyzed microplastics and associated biofilms in raw sewage, effluent water, and sludge from two WWTPs. Both plants retained >99% of influent microplastics in sludge, and sludge microplastics showed higher bacterial species richness and higher abundance of taxa associated with bioflocculation (e.g. Xanthomonas) than influent microplastics, suggesting that colonization of microplastics within the WWTP may play a role in retention. Microplastics in WWTP effluent included significantly lower abundances of some potentially pathogenic bacterial taxa (e.g. Campylobacteraceae) compared to influent microplastics; however, other potentially pathogenic taxa (e.g. Acinetobacter) remained abundant on effluent microplastics, and several taxa linked to plastic breakdown (e.g. Klebsiella, Pseudomonas, and Sphingomonas) were significantly more abundant on effluent compared to influent microplastics. These results indicate that diverse bacterial assemblages colonize microplastics within sewage and that WWTPs can play a significant role in modifying the microplastic-associated assemblages, which may affect the fate of microplastics within the WWTPs and the environment.

1,4-Naphthoquinone accumulates reactive oxygen species in Staphylococcus aureus: a promising approach towards effective management of biofilm threat

Staphylococcus aureus, a Gram-positive opportunistic microorganism, promotes pathogenicity in the human host through biofilm formation. Microorganisms associated with biofilm often exhibit drug-resistance property that poses a major threat to public healthcare. Thus, the exploration of new therapeutic approaches is the need of the hour to manage biofilm-borne infections. In the present study, efforts are put together to test the antimicrobial as well as antibiofilm activity of 1,4-naphthoquinone against Staphylococcus aureus. The result showed that the minimum bactericidal concentration (MBC) of this compound was found to be 100 µg/mL against Staphylococcus aureus. In this regard, an array of experiments (crystal violet, biofilm protein measurement, and microscopic analysis) related to biofilm assay were conducted with the sub-MBC concentrations (1/20 and 1/10 MBC) of 1,4-naphthoquinone. All the results of biofilm assay demonstrated that these tested concentrations (1/20 and 1/10 MBC) of the compound (1,4-naphthoquinone) showed a significant reduction in biofilm development by Staphylococcus aureus. Moreover, the tested concentrations (1/20 and 1/10 MBC) of the compound (1,4-naphthoquinone) were able to reduce the microbial motility of Staphylococcus aureus that might affect the development of biofilm. Further studies revealed that the treatment of 1,4-naphthoquinone to the organism was found to increase the cellular accumulation of reactive oxygen species (ROS) that resulted in the inhibition of biofilm formation by Staphylococcus aureus. Hence, it can be concluded that 1,4-naphthoquinone might be considered as a promising compound towards biofilm inhibition caused by Staphylococcus aureus.

Microplastics in the environment: Interactions with microbes and chemical contaminants

Microplastics (MPs) are contaminants of emerging concern that have gained considerable attention during the last few decades due to their adverse impact on living organisms and the environment. Recent studies have shown their ubiquitous presence in the environment including the atmosphere, soil, and water. Though several reviews have focused on the occurrence of microplastics in different habitats, little attention has been paid to their interaction with biological and chemical pollutants in the environment. This review therefore presents the state of knowledge on the interaction of MPs with chemicals and microbes in different environments. The distribution of MPs, the association of toxic chemicals with MPs, microbial association with MPs and the microbial-induced fate of MPs in the environment are discussed. The biodegradation and bioaccumulation of MPs by and in microbes and its potential impact on the food chain are also reviewed. The mechanisms driving these interactions and how these, in turn, affect living organisms however are not yet fully understood and require further attention.

Evidence of selective enrichment of bacterial assemblages and antibiotic resistant genes by microplastics in urban rivers

The ubiquitous presence of microplastics in aquatic environments has recently drawn considerable attention due to their potential threat to the entire ecosystem. The colonization of bacterial communities on microplastics is an important ecological linkage for microplastics in aquatic ecosystems, which is yet poorly understood. In this study, microplastic particles were sampled in two urbanized rivers in Jiaxing, Zhejiang, China, and the differences between bacterial assemblages colonizing microplastics and planktonic bacteria were estimated. Results from high-throughput sequencing showed that the bacterial communities on microplastics were less rich and diverse compared to those from the freshwater samples, with a significantly distinct taxonomic composition. The predicted functional profiles also indicated significant differences between microplastic and water samples. The functions related to biofilm formation and human diseases were relatively higher for the bacterial communities on the microplastics. Network analyses suggested that microplastic bacterial communities possessed higher average path length, clustering coefficient, and modularity compared to those in water samples. Additionally, quantitative PCR results showed microplastics selectively enriched antibiotic resistant genes (ARGs), and a good-fit correlation between ARG profiles and bacterial community composition was observed. The relative abundances of integron-integrase gene classes 1 and 2 were greater on microplastics, potentially suggesting a higher level of horizontal gene transfer. Findings of this study suggested microplastics are a novel microbial niche and may serve as hotspots for microbial interaction, potentially increasing risks to freshwater ecosystems and human health.

Degradation of low-density poly ethylene (LDPE) by Enterobacter cloacae AKS7: a potential step towards sustainable environmental remediation

Plastics composed of polyethylene are non-biodegradable and are mostly harmful to the environment. Literature studies documented that the extent of microbial degradation of low-density polyethylene (LDPE) seems to be insufficient and the underlying mechanisms of such degradation remain unexplored. In the present study, efforts were given to degrade LDPE by a recently isolated bacteria Enterobacter cloacae AKS7. Scanning electron microscopic (SEM) image, tensile strength, and weight loss analysis confirmed the efficient degradation of LDPE by AKS7. To investigate the mechanism, it was observed that with the progression of time, the extent of microbial colonization got increased considerably over the LDPE surface. It was also observed that the organism (AKS7) gradually increased the secretion of extracellular polymeric substances (EPS) suggesting the formation of efficient biofilm over the LDPE surface. Furthermore, to comprehend the role of cell-surface hydrophobicity towards biofilm formation, two mutants of AKS7 were screened that showed a considerable reduction in cell-surface hydrophobicity in contrast to its wild type. The result showed that the mutants revealed compromised LDPE degradation than wild-type cells of AKS7. Further investigation revealed that the mutant cells of AKS7 were incapable of adhering to LDPE in contrast to wild-type cells. Thus, the results demonstrated that the cell-surface hydrophobicity of AKS7 favors the development of microbial biofilm over LDPE that leads to the enhanced degradation of LDPE by AKS7. Therefore, the organism holds the assurance to be considered as a promising bio-remediating agent for the sustainable degradation of polythene-based hazardous waste.

Activity of Antibiotics against Pseudomonas aeruginosa in an In Vitro Model of Biofilms in the Context of Cystic Fibrosis: Influence of the Culture Medium

Pseudomonas aeruginosa is a major cause of respiratory biofilm-related infections in patients with cystic fibrosis. We developed an in vitro pharmacodynamic model to study the activity of antipseudomonal antibiotics against PAO1 biofilms grown in artificial sputum medium with agar [ASM(+)] versus that against biofilms grown in Trypticase soy broth supplemented with glucose and NaCl (TGN). We measured bacterial counts, metabolic activity (fluorescein diacetate [FDA] hydrolysis), and biomass (crystal violet absorbance). Biofilms grew slower in ASM(+) than in TGN but reached the same CFU counts and metabolic activity in both media and a slightly higher biomass after 48 h in ASM(+) than in TGN. The concentration-response curves of the antibiotics after 24 h of incubation with mature biofilms showed maximal effects ranging from a 3 (ciprofloxacin)- to a 1.5 (ceftazidime, meropenem)-log₁₀-CFU decrease, with tobramycin and colistin showing intermediate values. These maximal reductions in the numbers of CFU were similar in both media for ciprofloxacin and β-lactams but lower in ASM(+) than in TGN for tobramycin and colistin; they were reached at concentrations lower than the human maximum concentration in plasma for ciprofloxacin and β-lactams only. The reductions in metabolic activity and in biomass were low in both media. Small-colony variants were selected by tobramycin in ASM(+) and by ciprofloxacin in both media. The model was then successfully applied to 4 isolates from patients with cystic fibrosis. These biofilms showed CFU counts similar to those of PAO1 biofilms in ASM(+) but a higher biomass than PAO1 biofilms in ASM(+) and moderate differences in their susceptibility to antibiotics from that of PAO1 biofilms grown in this medium. This model proved useful to establish the pharmacodynamic profile of drugs against P. aeruginosa biofilms in the context of cystic fibrosis.

Exploration of strategies to increase the nitrogen and phosphate content of solid waste landfill soil

Several strategies were undertaken to increase the fertility of landfill soil as rapid urbanization remarkably decreases the agricultural land, posing challenges to the fast-growing human population. Towards this direction, soil microcosms were prepared wherein the addition of nutrient or biofertilizer or the combination of both increased the soil nitrogen and phosphate content considerably. The maximum amount of nitrogen fixation and phosphate solubilization occurred in microcosm treated with biofertilizer and nutrient. To investigate the underlying cause, we observed that separate application of nutrient or biofertilizer or combined application of both increased the abundance of nitrogen-fixing and phosphate-solubilizing bacteria in the microcosms. However, the highest abundance of nitrogen-fixing and phosphate-solubilizing bacteria was spotted in a microcosm challenged with nutrient and biofertilizer together. It was detected that with increasing population of nitrogen-fixing and phosphate-solubilizing bacteria, the soil nitrogen and phosphate level also got enhanced, respectively, thus establishing a strong positive correlation between them. The microcosm treated with biofertilizer and nutrient manifested the highest degree of heterotrophic microbial growth and microbial activity than the microcosms either treated with nutrient or biofertilizer. The microcosm treated with nutrient and biofertilizer was found to exhibit the highest functional diversity compared to others. A surface plot was constructed to demonstrate the association among microbial activity, functional diversity, and the availability of soil nitrogen and phosphate content of soil. The result indicates that the combined application of nutrient and biofertilizer increases the microbial activity leading to the formation of a heterogeneous ecosystem that enhances the nitrogen and phosphate content of landfill soil considerably.

Inhibition of biofilm formation of Pseudomonas aeruginosa by caffeine: a potential approach for sustainable management of biofilm

Pseudomonas aeruginosa is a potent biofilm forming organism causing several diseases on host involving biofilm. Several natural and synthetic molecules have been explored towards inhibiting the biofilm formation of Pseudomonas aeruginosa. In the current report, the role of a natural molecule namely caffeine was examined against the biofilm forming ability of P. aeruginosa. We have observed that caffeine shows substantial antimicrobial activity against P. aeruginosa wherein the minimum inhibitory concentration (MIC) of caffeine was found to be 200 μg/mL. The antibiofilm activity of caffeine was determined by performing a series of experiments using its sub-MIC concentrations (40 and 80 μg/mL). The results revealed that caffeine can significantly inhibit the biofilm development of P. aeruginosa. Caffeine has been found to interfere with the quorum sensing of P. aeruginosa by targeting the swarming motility. Molecular docking analysis further indicated that caffeine can interact with the quorum sensing proteins namely LasR and LasI. Thus, the result indicated that caffeine could inhibit the formation of biofilm by interfering with the quorum sensing of the organism. Apart from biofilm inhibition, caffeine has also been found to reduce the secretion of virulence factors from Pseudomonas aeruginosa. Taken together, the results revealed that in addition to biofilm inhibition, caffeine can also decrease the spreading of virulence factors from Pseudomonas aeruginosa.

Biodegradation of Polyethylene by Enterobacter sp. D1 from the Guts of Wax Moth Galleria mellonella

Plastic polymers are widely used in agriculture, industry, and our daily life because of their convenient and economic properties. However, pollution caused by plastic polymers, especially polyethylene (PE), affects both animal and human health when they aggregate in the environment, as they are not easily degraded under natural conditions. In this study, Enterobacter sp. D1 was isolated from the guts of wax moth (Galleria mellonella). Microbial colonies formed around a PE film after 14 days of cultivation with D1. Roughness, depressions, and cracks were detected on the surface of the PE film by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Fourier transform infrared spectroscopy (FTIR) showed the presence of carbonyl functional groups and ether groups on the PE film that was treated with D1. Liquid chromatography-tandem mass spectrometry (LC-MS) also revealed that the contents of certain alcohols, esters, and acids were increased as a result of the D1 treatment, indicating that oxidation reaction occurred on the surface of the PE film treated with D1 bacteria. These observations confirmed that D1 bacteria has an ability to degrade PE.

Functional diversity performs a key role in the isolation of nitrogen-fixing and phosphate-solubilizing bacteria from soil

Functional diversity covers diverse functional traits of microorganisms in an ecosystem. Thus, we hypothesized that it could play an important role in the isolation of nitrogen-fixing and phosphate-solubilizing bacteria. These bacteria have been considered as biofertilizer for sustainable agriculture development. Soils were collected from different sites of agricultural field and performed several microbiological tests in which we observed considerable differences in heterotrophic microbial abundance and microbial activities among the microcosms. Functional diversity depends on both microbial richness and evenness. Based on the results of metabolic fingerprinting of the carbon sources of BiOLOG-ECO plates, richness and evenness was measured by determining Shannon diversity index and Gini coefficient, respectively. The results showed significant differences in both microbial richness and evenness, suggesting considerable variation of functional diversity among the microcosms. Thereafter, nitrogen-fixing and phosphate-solubilizing bacteria were isolated on Burk's and Pikovskaya media, respectively. The results revealed considerable variation of both types of bacterial abundance among the microcosms. Microcosm (T2) showing the highest functional diversity houses the maximum numbers of nitrogen-fixing and phosphate-solubilizing bacteria. Similarly, the microcosm (T5) exhibiting the lowest functional diversity houses the minimum numbers of nitrogen-fixing and phosphate-solubilizing bacteria. Thus, a strong positive correlation was observed between functional diversity and both types of bacterial abundance among the soil samples. Higher richness and evenness lead to the development of increased functional diversity that facilitates to accommodate substantial numbers of nitrogen-fixing and phosphate-solubilizing bacteria in soil. Taken together, the results demonstrated that functional diversity plays an important role in the isolation of nitrogen-fixing and phosphate-solubilizing bacteria from soil.

Microbial functional diversity plays an important role in the degradation of polyhydroxybutyrate (PHB) in soil

Towards bioremediation of recalcitrant materials like synthetic polymer, soil has been recognized as a traditional site for disposal and subsequent degradation as some microorganisms in soil can degrade the polymer in a non-toxic, cost-effective, and environment friendly way. Microbial functional diversity is a constituent of biodiversity that includes wide range of metabolic activities that can influence numerous aspects of ecosystem functioning like ecosystem stability, nutrient availability, ecosystem dynamics, etc. Thus, in the current study, we assumed that microbial functional diversity could play an important role in polymer degradation in soil. To verify this hypothesis, we isolated soil from five different sites of landfill and examined several microbiological parameters wherein we observed a significant variation in heterotrophic microbial count as well as microbial activities among the soil microcosms tested. Multivariate analysis (principle component analysis) based on the carbon sources utilization pattern revealed that soil microcosms showed different metabolic patterns suggesting the variable distribution of microorganisms among the soil microcosms tested. Since microbial functional diversity depends on both microbial richness and evenness, Shannon diversity index was determined to measure microbial richness and Gini coefficient was determined to measure microbial evenness. The tested soil microcosms exhibited variation in both microbial richness and evenness suggesting the considerable difference in microbial functional diversity among the tested microcosms. We then measured polyhydroxybutyrate (PHB) degradation in soil microcosms after desired period of incubation of PHB in soil wherein we found that soil microcosms having higher functional diversity showed enhanced PHB degradation and soil microcosms having lower functional diversity showed reduced PHB degradation. We also noticed that all the tested soil microcosms showed similar pattern in both microbial functional diversity and PHB degradation suggesting a strong positive correlation (r = 0.95) between microbial functional diversity and PHB degradation. Thus, the results demonstrate that microbial functional diversity plays an important role in PHB degradation in soil by exhibiting versatile microbial metabolic potentials that lead to the enhanced degradation of PHB.

Pre-oxidation of low-density polyethylene (LDPE) by ultraviolet light (UV) promotes enhanced degradation of LDPE in soil

Polyethylene represents nearly 64% of all the synthetic plastics produced and are mainly used for domestic and industrial applications. Their extensive use poses a serious environmental threat because of their non-biodegradable nature. Among all the polyethylene remediation strategies, in situ bioremediation happens to be the safest and efficient one. In the current study, efforts had been given to compare the extent of LDPE degradation under UV-treated and UV-untreated conditions by soil microcosm. Landfill soil was collected and UV-treated and UV-untreated LDPE were added separately to the soil following incubation under similar conditions. Electron microscopic images as well as the weight loss and the tensile strength results clearly revealed that UV-treated LDPE showed better degradation than the non-treated ones in soil. To elucidate the mechanism of this enhanced biodegradation, the bond spectra of differentially treated LDPE were analyzed by FTIR. The results obtained from bond spectra studies revealed that UV treatment increases both carbonyl and terminal double-bond index of the LDPE, thereby making it highly susceptible for microbial degradation. Moreover, incubation of UV-treated LDPE with soil favors better adherence of metabolically active and significantly higher number of microorganisms on it. Taken together, all these results demonstrate the higher microbial association and their better metabolic potential to the UV-treated LDPE that lead to enhanced degradation of the LDPE by the soil microorganisms.

Zinc oxide nanoparticle inhibits the biofilm formation of Streptococcus pneumoniae

Biofilms are structured consortia of microbial cells that grow on living and non living surfaces and surround themselves with secreted polymers. Infections with bacterial biofilms have emerged as a foremost public health concern because biofilm growing cells can be highly resistant to both antibiotics and host immune defenses. Zinc oxide nanoparticles have been reported as a potential antimicrobial agent, thus, in the current study, we have evaluated the antimicrobial as well as antibiofilm activity of zinc oxide nanoparticles against the bacterium Streptococcus pneumoniae which is a significant cause of disease. Zinc oxide nanoparticles showed strong antimicrobial activity against S. pneumoniae, with an MIC value of 40 μg/ml. Biofilm inhibition of S. pneumoniae was also evaluated by performing a series of experiments such as crystal violet assay, microscopic observation, protein count, EPS secretion etc. using sub-MIC concentrations (3, 6 and 12 µg/ml) of zinc oxide nanoparticles. The results showed that the sub-MIC doses of zinc oxide nanoparticles exhibited significant anti-biofilm activity against S. pneumoniae, with maximum biofilm attenuation found at 12 μg/ml. Taken together, the results indicate that zinc oxide nanoparticles can be considered as a potential agent for the inhibition of microbial biofilms.

Development of tailored indigenous marine consortia for the degradation of naturally weathered polyethylene films

This study investigated the potential of bacterial-mediated polyethylene (PE) degradation in a two-phase microcosm experiment. During phase I, naturally weathered PE films were incubated for 6 months with the indigenous marine community alone as well as bioaugmented with strains able to grow in minimal medium with linear low-density polyethylene (LLDPE) as the sole carbon source. At the end of phase I the developed biofilm was harvested and re-inoculated with naturally weathered PE films. Bacteria from both treatments were able to establish an active population on the PE surfaces as the biofilm community developed in a time dependent way. Moreover, a convergence in the composition of these communities was observed towards an efficient PE degrading microbial network, comprising of indigenous species. In acclimated communities, genera affiliated with synthetic (PE) and natural (cellulose) polymer degraders as well as hydrocarbon degrading bacteria were enriched. The acclimated consortia (indigenous and bioaugmented) reduced more efficiently the weight of PE films in comparison to non-acclimated bacteria. The SEM images revealed a dense and compact biofilm layer and signs of bio-erosion on the surface of the films. Rheological results suggest that the polymers after microbial treatment had wider molecular mass distribution and a marginally smaller average molar mass suggesting biodegradation as opposed to abiotic degradation. Modifications on the surface chemistry were observed throughout phase II while the FTIR profiles of microbially treated films at month 6 were similar to the profiles of virgin PE. Taking into account the results, we can suggest that the tailored indigenous marine community represents an efficient consortium for degrading weathered PE plastics.

Addition of Rubber to soil damages the functional diversity of soil

Rubber is a polymer of isoprene, consisting mainly of cis-1,4-polyisoprene units. The unmanageable production and its irresponsible disposal pose severe threats to environmental ecology. Therefore, the current study focuses extensively on the ill-effects of Rubber disposal on soil microbial functional diversity as it reflects the health of ecosystem by acting as a key component in ecosystem productivity. To investigate the effect of Rubber on soil microbial functional diversity, soil samples were collected from landfill sites and three different soil microcosms (Rubber treated, untreated, and sterile soil) were prepared. The soil enzymatic activity was determined by fluorescein diacetate hydrolysis followed by the determination of the microbial metabolic potential and functional diversity by average well color development and Shannon-Weaver index (H), respectively. BiOLOG ECO plates were used for determining the microbial functional diversity of the soil microcosms. Higher heterotrophic microbial count as well as higher soil microbial activity was observed in Rubber untreated soil than Rubber treated soil microcosm. The result indicated that the addition of Rubber to soil reduced soil heterotrophic microbial count and soil microbial activity considerably. Similarly, soil microbial metabolic potential as well as microbial functional diversity of soil had been decreased by the addition of Rubber gloves in it. Variation in soil microbial metabolic spectrum between Rubber treated and untreated microcosm was confirmed by multivariate analysis. Collectively, all the results demonstrated that the addition of Rubber to soil reduced the soil microbial functional diversity considerably. Therefore, it is necessary for the commission of serious steps regarding Rubber disposal and protection of the environment from serious environmental issues.

Degradation and metabolism of synthetic plastics and associated products by Pseudomonas sp.: capabilities and challenges

Synthetic plastics, which are widely present in materials of everyday use, are ubiquitous and slowly-degrading polymers in environmental wastes. Of special interest are the capabilities of microorganisms to accelerate their degradation. Members of the metabolically diverse genus Pseudomonas are of particular interest due to their capabilities to degrade and metabolize synthetic plastics. Pseudomonas species isolated from environmental matrices have been identified to degrade polyethylene, polypropylene, polyvinyl chloride, polystyrene, polyurethane, polyethylene terephthalate, polyethylene succinate, polyethylene glycol and polyvinyl alcohol at varying degrees of efficiency. Here, we present a review of the current knowledge on the factors that control the ability of Pseudomonas sp. to process these different plastic polymers and their by-products. These factors include cell surface attachment within biofilms, catalytic enzymes involved in oxidation or hydrolysis of the plastic polymer, metabolic pathways responsible for uptake and assimilation of plastic fragments and chemical factors that are advantageous or inhibitory to the biodegradation process. We also highlight future research directions required in order to harness fully the capabilities of Pseudomonas sp. in bioremediation strategies towards eliminating plastic wastes.

Allee effect: the story behind the stabilization or extinction of microbial ecosystem

A population exhibiting Allee effect shows a positive correlation between population fitness and population size or density. Allee effect decides the extinction or conservation of a microbial population and thus appears to be an important criterion in population ecology. The underlying factor of Allee effect that decides the stabilization and extinction of a particular population density is the threshold or the critical density of their abundance. According to Allee, microbial populations exhibit a definite, critical or threshold density, beyond which the population fitness of a particular population increases with the rise in population density and below it, the population fitness goes down with the decrease in population density. In particular, microbial population displays advantageous traits such as biofilm formation, expression of virulence genes, spore formation and many more only at a high population density. It has also been observed that microorganisms exhibiting a lower population density undergo complete extinction from the residual microbial ecosystem. In reference to Allee effect, decrease in population density or size introduces deleterious mutations among the population density through genetic drift. Mutations are carried forward to successive generations resulting in its accumulation among the population density thus reducing its microbial fitness and thereby increasing the risk of extinction of a particular microbial population. However, when the microbial load is high, the chance of genetic drift is less, and through the process of biofilm formation, the cooperation existing among the microbial population increases that increases the microbial fitness. Thus, the high microbial population through the formation of microbial biofilm stabilizes the ecosystem by increasing fitness. Taken together, microbial fitness shows positive correlation with the ecosystem conservation and negative correlation with ecosystem extinction.