Human amniotic fluid-derived and dental pulp-derived stem cells seeded into collagen scaffold repair critical-size bone defects promoting vascularization

Synthesis and characterization of a bovine collagen: GAG scaffold with Uruguayan raw material for tissue engineering

Tissue engineering (TE) and regenerative medicine offer strategies to improve damaged tissues by using scaffolds and cells. The use of collagen-based biomaterials in the field of TE has been intensively growing over the past decades. Mesenchymal stromal cells (MSCs) and dental pulp stem cells (DPSCs) are promising cell candidates for development of clinical composites. In this study, we proposed the development of a bovine collagen type I: chondroitin-6-sulphate (CG) scaffold, obtained from Uruguayan raw material (certified as free bovine spongiform encephalopathy), with CG crosslinking enhancement using different gamma radiation doses. Structural, biomechanical and chemical characteristics of the scaffolds were assessed by Scanning Electron Microscopy, axial tensile tests, FT-IR and Raman Spectroscopy, respectively. Once we selected the most appropriate scaffold for future use as a TE product, we studied the behavior of MSCs and DPSCs cultured on the scaffold by cytotoxicity, proliferation and differentiation assays. Among the diverse porous scaffolds obtained, the one with the most adequate properties was the one exposed to 15 kGy of gamma radiation. This radiation dose contributed to the crosslinking of molecules, to the formation of new bonds and/or to the reorganization of the collagen fibers. The selected scaffold was non-cytotoxic for the tested cells and a suitable substrate for cell proliferation. Furthermore, the scaffold allowed MSCs differentiation to osteogenic, chondrogenic, and adipogenic lineages. Thus, this work shows a promising approach to the synthesis of a collagen-scaffold suitable for TE.

Processing methods for human amniotic membrane as scaffold for tissue engineering with mesenchymal stromal human cells

Tissue engineering is an interdisciplinary field that applies the principles of engineering and life sciences toward the development of biological substitutes that restore, maintain, or improve tissue function. The aims of this work were to compare chemically and physically processed human Amniotic Membranes (hAM) and analyze the cytocompatibility and proliferation rate (PR) of two primary human mesenchymal stromal cell lines, from different sources and donor conditions seeded over these scaffolds. The evaluated hAM processes were: cold shock to obtain a frozen amniotic membrane (FEAM) with remaining dead epithelial cells, denudation of hAM with trypsin for 20/10 min (DEAM20/10) or treatment with sodium dodecyl sulfate to decellularized hAM (DAM). All samples were sterilized with gamma radiation. The selection of the treated hAM to then generate composites was performed by scanning and transmission electron microscopy and characterization by X-ray diffraction, selecting DEAM10 and FEAM as scaffolds for cell seeding. Two sources of primary human stromal cells were used, both developed by our researchers, human Dental Pulp Stem Cells (hDPSC) from living donors and human Mesenchymal Stromal Cells (hMSC) from bone marrow isolated from brain dead donors. This last line of cells conveys a novel source of human cells that, to our knowledge, have not been tested as part of this type of construct. We developed four in vitro constructs without cytotoxicity signs and with different PR depending on the scaffolds and cells. hDPSC and hMSC grew over both FEAM and DEAM10, but DEAM10 allowed higher PR.

Silicon Nitride Bioceramics Sintered by Microwave Exhibit Excellent Mechanical Properties, Cytocompatibility In Vitro, and Anti-Bacterial Properties

Silicon nitride is a bioceramic with great potential, and multiple studies have demonstrated its biocompatibility and antibacterial properties. In this study, silicon nitride was prepared by a microwave sintering technique that was different from common production methods. SEM and pore distribution analysis revealed the microstructure of microwave-sintered silicon nitride with obvious pores. Mechanical performance analysis shows that microwave sintering can improve the mechanical properties of silicon nitride. The CCK-8 method was used to demonstrate that microwave-sintered silicon nitride has no cytotoxicity and good cytocompatibility. From SEM and CLSM observations, it was observed that there was good adhesion and cross-linking of cells during microwave-sintered silicon nitride, and the morphology of the cytoskeleton was good. Microwave-sintered silicon nitride has been proven to be non-cytotoxic. In addition, the antibacterial ability of microwave-sintered silicon nitride against Staphylococcus aureus and Escherichia coli was tested, proving that it has a good antibacterial ability similar to the silicon nitride prepared by commonly used processes. Compared with silicon nitride prepared by gas pressure sintering technology, microwave-sintered silicon nitride has excellent performance in mechanical properties, cell compatibility, and antibacterial properties. This indicates its enormous potential as a substitute material for manufacturing bone implants.

Potential of dental pulp stem cells and their products in promoting peripheral nerve regeneration and their future applications

Peripheral nerve injury (PNI) seriously affects people's quality of life. Stem cell therapy is considered a promising new option for the clinical treatment of PNI. Dental stem cells, particularly dental pulp stem cells (DPSCs), are adult pluripotent stem cells derived from the neuroectoderm. DPSCs have significant potential in the field of neural tissue engineering due to their numerous advantages, such as easy isolation, multidifferentiation potential, low immunogenicity, and low transplant rejection rate. DPSCs are extensively used in tissue engineering and regenerative medicine, including for the treatment of sciatic nerve injury, facial nerve injury, spinal cord injury, and other neurodegenerative diseases. This article reviews research related to DPSCs and their advantages in treating PNI, aiming to summarize the therapeutic potential of DPSCs for PNI and the underlying mechanisms and providing valuable guidance and a foundation for future research.

Evaluating the efficacy of human dental pulp stem cells and scaffold combination for bone regeneration in animal models: a systematic review and meta-analysis

INTRODUCTION

Human adult dental pulp stem cells (hDPSC) and stem cells from human exfoliated deciduous teeth (SHED) hold promise in bone regeneration for their easy accessibility, high proliferation rate, self-renewal and osteogenic differentiation capacity. Various organic and inorganic scaffold materials were pre-seeded with human dental pulp stem cells in animals, with promising outcomes in new bone formation. Nevertheless, the clinical trial for bone regeneration using dental pulp stem cells is still in its infancy. Thus, the aim of this systematic review and meta-analysis is to synthesise the evidence of the efficacy of human dental pulp stem cells and the scaffold combination for bone regeneration in animal bone defect models.

METHODOLOGY

This study was registered in PROSPERO (CRD2021274976), and PRISMA guideline was followed to include the relevant full-text papers using exclusion and inclusion criteria. Data were extracted for the systematic review. Quality assessment and the risk of bias were also carried out using the CAMARADES tool. Quantitative bone regeneration data of the experimental (scaffold + hDPSC/SHED) and the control (scaffold-only) groups were also extracted for meta-analysis.

RESULTS

Forty-nine papers were included for systematic review and only 27 of them were qualified for meta-analysis. 90% of the included papers were assessed as medium to low risk. In the meta-analysis, qualified studies were grouped by the unit of bone regeneration measurement. Overall, bone regeneration was significantly higher (p < 0.0001) in experimental group (scaffold + hDPSC/SHED) compared to the control group (scaffold-only) (SMD: 1.863, 95% CI 1.121-2.605). However, the effect is almost entirely driven by the % new bone formation group (SMD: 3.929, 95% CI 2.612-5.246) while % BV/TV (SMD: 2.693, 95% CI - 0.001-5.388) shows a marginal effect. Dogs and hydroxyapatite-containing scaffolds have the highest capacity in % new bone formation in response to human DPSC/SHED. The funnel plot exhibits no apparent asymmetry representing a lack of remarkable publication bias. Sensitivity analysis also indicated that the results generated in this meta-analysis are robust and reliable.

CONCLUSION

This is the first synthesised evidence showing that human DPSCs/SHED and scaffold combination enhanced bone regeneration highly significantly compared to the cell-free scaffold irrespective of scaffold type and animal species used. So, dental pulp stem cells could be a promising tool for treating various bone diseases, and more clinical trials need to be conducted to evaluate the effectiveness of dental pulp stem cell-based therapies.

Dental pulp stem cells for reconstructing bone defects: A systematic review and meta-analysis

BACKGROUND

Bone reconstruction with appropriate quality and quantity for dental implant replacement in the alveolar ridge is a challenge in dentistry. As dental pulp stem cells (DPSCs) could be a new perspective in bone regeneration in the future, this study investigated the bone regeneration process by DPSCs.

METHODS

Electronic searches for articles in the PubMed, EMBASE, and Scopus databases were completed until 21 April 2022. The most important inclusion criteria for selecting in vivo studies reporting quantitative data based on new bone volume and new bone area. The quality assessment was performed based on Cochrane's checklist.

RESULTS

After the title, abstract, and full-text screening of 762 studies, 23 studies were included. A meta-analysis of 70 studies that reported bone regeneration based on new bone area showed a statistically significant favorable influence on bone tissue regeneration compared to the control groups (P<0.00001, standardized mean difference [SMD]=2.40, 95% CI: 1.55‒3.26; I2=83%). Also, the meta-analysis of 14 studies that reported new bone regeneration based on bone volume showed a statistically significant favorable influence on bone tissue regeneration compared to the control groups (P=0.0003, SMD=1.85, 95% CI: 0.85‒2.85; I2=84%).

CONCLUSION

This systematic review indicated that DPSCs in tissue regeneration therapy significantly affected bone tissue complex regeneration. However, more and less diverse preclinical studies will enable more powerful meta-analyses in the future.

Allogenic Perinatal Tissue for Musculoskeletal Regenerative Medicine Applications: A Systematic Review

Producing tremendous amounts of stress and financial burden on the global patient population and healthcare systems around the world, most current modalities of treatment for musculoskeletal ailments often do not address the etiopathogenetic causes of these disorders. Regenerative medicine for musculoskeletal disorders relies on orthobiologics derived from either allogenic or autologous sources. Multiple drawbacks are associated with autologous sources, including donor-site morbidity, a dearth of studies, and variability in both patient reported and clinical/functional outcomes. On the other hand, allogenic sources address several of these concerns, and continue to be a suitable source of mesenchymal stem cells (MSCs). This review qualitatively reports both the preclinical and clinical outcomes of publications studying the applications of umbilical cord (-derived Wharton's jelly), amniotic suspension allograft, amniotic membrane, and amniotic fluid in musculoskeletal medicine. A systematic review was conducted utilizing the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines on studies published between January 2010 and October 2022 that used allogeneic perinatal tissues. Further randomized controlled clinical studies are necessary to properly evaluate the safety and efficacy of these tissues in orthopedic surgery.

Breakthrough of extracellular vesicles in pathogenesis, diagnosis and treatment of osteoarthritis

Osteoarthritis (OA) is a highly prevalent whole-joint disease that causes disability and pain and affects a patient's quality of life. However, currently, there is a lack of effective early diagnosis and treatment. Although stem cells can promote cartilage repair and treat OA, problems such as immune rejection and tumorigenicity persist. Extracellular vesicles (EVs) can transmit genetic information from donor cells and mediate intercellular communication, which is considered a functional paracrine factor of stem cells. Increasing evidences suggest that EVs may play an essential and complex role in the pathogenesis, diagnosis, and treatment of OA. Here, we introduced the role of EVs in OA progression by influencing inflammation, metabolism, and aging. Next, we discussed EVs from the blood, synovial fluid, and joint-related cells for diagnosis. Moreover, we outlined the potential of modified and unmodified EVs and their combination with biomaterials for OA therapy. Finally, we discuss the deficiencies and put forward the prospects and challenges related to the application of EVs in the field of OA.

The potential therapeutic role of extracellular vesicles in osteoarthritis

Osteoarthritis (OA) is a worldwide and disabling disease, which cause severe pain and heavy socioeconomic burden. However, pharmacologic or surgical therapies cannot mitigate OA progression. Mesenchymal stem cells (MSCs) therapy has emerged as potential approach for OA treatment, while the immunogenicity and ethical audit of cell therapy are unavoidable. Compared with stem cell strategy, EVs induce less immunological rejection, and they are more stable for storage and in vivo application. MSC-EVs-based therapy possesses great potential in regulating inflammation and promoting cartilage matrix reconstruction in OA treatment. To enhance the therapeutic effect, delivery efficiency, tissue specificity and safety, EVs can be engineered via different modification strategies. Here, the application of MSC-EVs in OA treatment and the potential underlying mechanism were summarized. Moreover, EV modification strategies including indirect MSC modification and direct EV modification were reviewed.

A Narrative Review of Cell-Based Approaches for Cranial Bone Regeneration

Current cranial repair techniques combine the use of autologous bone grafts and biomaterials. In addition to their association with harvesting morbidity, autografts are often limited by insufficient quantity of bone stock. Biomaterials lead to better outcomes, but their effectiveness is often compromised by the unpredictable lack of integration and structural failure. Bone tissue engineering offers the promising alternative of generating constructs composed of instructive biomaterials including cells or cell-secreted products, which could enhance the outcome of reconstructive treatments. This review focuses on cell-based approaches with potential to regenerate calvarial bone defects, including human studies and preclinical research. Further, we discuss strategies to deliver extracellular matrix, conditioned media and extracellular vesicles derived from cell cultures. Recent advances in 3D printing and bioprinting techniques that appear to be promising for cranial reconstruction are also discussed. Finally, we review cell-based gene therapy approaches, covering both unregulated and regulated gene switches that can create spatiotemporal patterns of transgenic therapeutic molecules. In summary, this review provides an overview of the current developments in cell-based strategies with potential to enhance the surgical armamentarium for regenerating cranial vault defects.

Craniofacial Bone Tissue Engineering: Current Approaches and Potential Therapy

Craniofacial bone defects can result from various disorders, including congenital malformations, tumor resection, infection, severe trauma, and accidents. Successfully regenerating cranial defects is an integral step to restore craniofacial function. However, challenges managing and controlling new bone tissue formation remain. Current advances in tissue engineering and regenerative medicine use innovative techniques to address these challenges. The use of biomaterials, stromal cells, and growth factors have demonstrated promising outcomes in vitro and in vivo. Natural and synthetic bone grafts combined with Mesenchymal Stromal Cells (MSCs) and growth factors have shown encouraging results in regenerating critical-size cranial defects. One of prevalent growth factors is Bone Morphogenetic Protein-2 (BMP-2). BMP-2 is defined as a gold standard growth factor that enhances new bone formation in vitro and in vivo. Recently, emerging evidence suggested that Megakaryocytes (MKs), induced by Thrombopoietin (TPO), show an increase in osteoblast proliferation in vitro and bone mass in vivo. Furthermore, a co-culture study shows mature MKs enhance MSC survival rate while maintaining their phenotype. Therefore, MKs can provide an insight as a potential therapy offering a safe and effective approach to regenerating critical-size cranial defects.

Biofabrication of allogenic bone grafts using cellularized amniotic scaffolds for application in efficient bone healing

INTRODUCTION

The reconstruction/regeneration of human bone injuries/defects represents a crucial challenge due to the lack of suitable bio/immune compatible and implantable biological grafts. The available strategies represent implications of several types of grafting materials in the form of metals, synthetic, and various kinds of biological scaffolds; however, the lack of appropriate biological components required for activating and enhancing repair mechanisms at the lesion-site limits their wider applicability.

METHODS

In this study, a unique approach for generating human osteogenic implantable grafts was developed using biofabrication technology. Using a gradient change of detergents and continuous agitation, developed a unique technique to generate completely cell-free amnion and chorion scaffolds. The absence of cellular components and integrity of biological and mechanical cues within decellularized human amnion (D-HAM) and chorion (D-HCM) were evaluated and compared with fresh membranes. Allogenic bone grafts were prepared through induction of human mesenchymal stem cells (hMSCs) into osteogenic cells on D-HAM and D-HCM and evaluated for their comparative behavior at the cellular, histological and molecular levels.

RESULTS

The common decellularization process resulted in an efficient way to generate D-HAM and D-HCM while retaining their intact gross-anatomical architecture, surface morphology, extracellular matrix components, and mechanical properties. Both these scaffolds supported better growth of human umbilical cord blood derived MSCs as well as osteogenic differentiation. Comparative investigation revealed better growth rate and differentiation on D-HCM compared to D-HAM and control conditions.

CONCLUSION

D-HCM could be used as a better choice for producing suitable allogenic bone grafts for efficient bone healing applications.

Comparative Proteomic and Metabolomic Analysis of Human Osteoblasts, Differentiated from Dental Pulp Stem Cells, Hinted Crucial Signaling Pathways Promoting Osteogenesis

Population aging has been a global trend for the last decades, which increases the pressure to develop new cell-based or drug-based therapies, including those that may cure bone diseases. To understand molecular processes that underlie bone development and turnover, we followed osteogenic differentiation of human dental pulp stem cells (DPSCs) using a specific induction medium. The differentiation process imitating in vivo osteogenesis is triggered by various signaling pathways and is associated with massive proteome and metabolome changes. Proteome was profiled by ultrahigh-performance liquid chromatography and comprehensively quantified by ion mobility-enhanced mass spectrometry. From 2667 reproducibly quantified and identified proteins, 432 were differentially abundant by strict statistic criteria. Metabolome profiling was carried out by nuclear magnetic resonance. From 27 detected metabolites, 8 were differentially accumulated. KEGG and MetaboAnalyst hinted metabolic pathways that may be involved in the osteogenic process. Enrichment analysis of differentially abundant proteins highlighted PPAR, FoxO, JAK-STAT, IL-17 signaling pathways, biosynthesis of thyroid hormones and steroids, mineral absorption, and fatty acid metabolism as processes with prominent impact on osteoinduction. In parallel, metabolomic data showed that aminoacyl-tRNA biosynthesis, as well as specific amino acids, likely promote osteodifferentiation. Targeted immunoassays validated and complemented omic results. Our data underlined the complexity of the osteogenic mechanism. Finally, we proposed promising targets for future validation in patient samples, a step toward the treatment of bone defects.

Magneto-sensitive decellularized bone matrix with or without low frequency-pulsed electromagnetic field exposure for the healing of a critical-size bone defect

Bioactive ECM-based materials mimic the complex composition and structure of natural tissues. Decellularized cancellous bone matrix (DBM) has potential for guiding new bone formation and accelerating the regeneration process. On the other hand, low frequency-pulsed electromagnetic field (LF-PEMF) has been shown to enhance the regeneration capacity of bone defects. The present study sought to explore the feasibility of using DBM and DBM/MNP, and LF-PEMF for treating critical-size bone defects. Firstly, decellularization protocol was optimized to obtain a bioactive DBM, then MNPs were incorporated. Later, the physical, chemical and biological properties of DBM and DBM/MNP were assessed in vitro. MNPs homogeneously distributed into the DBM were not found to be toxic to human osteoblast cultures. Finally, an in vivo study was carried out with DBM and DBM/MNP composites in a bilateral critical-size rat cranial defect model (n = 48) with or without LF-PEMF exposure for 45 and 90 days. The histomorphometric and radiographic evaluations revealed that, while the collagen (positive control) and Sham (negative control) groups showed high incidence of fibrous connective tissue together with low level of osteogenic activity, both the DBM and DBM/MNP-grafted groups significantly promoted new bone tissue formation and angiogenesis, by the appropriate use of LF-PEMF for 90 days.

Unravelling Heterogeneity of Amplified Human Amniotic Fluid Stem Cells Sub-Populations

Human amniotic fluid stem cells (hAFSCs) are broadly multipotent immature progenitor cells with high self-renewal and no tumorigenic properties. These cells, even amplified, present very variable morphology, density, intracellular composition and stemness potential, and this heterogeneity can hinder their characterization and potential use in regenerative medicine. Celector^® (Stem Sel ltd.) is a new technology that exploits the Non-Equilibrium Earth Gravity Assisted Field Flow Fractionation principles to characterize and label-free sort stem cells based on their solely physical characteristics without any manipulation. Viable cells are collected and used for further studies or direct applications. In order to understand the intrapopulation heterogeneity, various fractions of hAFSCs were isolated using the Celector^® profile and live imaging feature. The gene expression profile of each fraction was analysed using whole-transcriptome sequencing (RNAseq). Gene Set Enrichment Analysis identified significant differential expression in pathways related to Stemness, DNA repair, E2F targets, G2M checkpoint, hypoxia, EM transition, mTORC1 signalling, Unfold Protein Response and p53 signalling. These differences were validated by RT-PCR, immunofluorescence and differentiation assays. Interestingly, the different fractions showed distinct and unique stemness properties. These results suggest the existence of deep intra-population differences that can influence the stemness profile of hAFSCs. This study represents a proof-of-concept of the importance of selecting certain cellular fractions with the highest potential to use in regenerative medicine.

Synthetic Scaffold/Dental Pulp Stem Cell (DPSC) Tissue Engineering Constructs for Bone Defect Treatment: An Animal Studies Literature Review

Background: Recently a greater interest in tissue engineering for the treatment of large bone defect has been reported. The aim of the present systematic review and meta-analysis was to investigate the effectiveness of dental pulp stem cells and synthetic block complexes for bone defect treatment in preclinical in vivo articles. Methods: The electronic database and manual search was conducted on Pubmed, Scopus, and EMBASE. The papers identified were submitted for risk-of-bias assessment and classified according to new bone formation, bone graft characteristics, dental pulp stem cells (DPSCs) culture passages and amount of experimental data. The meta-analysis assessment was conducted to assess new bone formation in test sites with DPSCs/synthetic blocks vs. synthetic block alone. Results: The database search identified a total of 348 papers. After the initial screening, 30 studies were included, according to the different animal models: 19 papers on rats, 3 articles on rabbits, 2 manuscripts on sheep and 4 papers on swine. The meta-analysis evaluation showed a significantly increase in new bone formation in favor of DPSCs/synthetic scaffold complexes, if compared to the control at 4 weeks (Mean Diff: 17.09%, 95% CI: 15.16–18.91%, p < 0.01) and at 8 weeks (Mean Diff: 14.86%, 95% CI: 1.82–27.91%, p < 0.01) in rats calvaria bone defects. Conclusion: The synthetic scaffolds in association of DPSCs used for the treatment of bone defects showed encouraging results of early new bone formation in preclinical animal studies and could represent a useful resource for regenerative bone augmentation procedures

A Current Overview of Scaffold-Based Bone Regeneration Strategies with Dental Stem Cells

Bone defects due to trauma or diseases still pose a clinical challenge to be resolved in the current tissue engineering approaches. As an alternative to traditional methods to restore bone defects, such as autografts, bone tissue engineering aims to achieve new bone formation via novel biomaterials used in combination with multipotent stem cells and bioactive molecules. Mesenchymal stem cells (MSCs) can be successfully isolated from various dental tissues at different stages of development including dental pulp, apical papilla, dental follicle, tooth germ, deciduous teeth, periodontal ligament and gingiva. A wide range of biomaterials including polymers, ceramics and composites have been investigated for their potential as an ideal bone scaffold material. This article reviews the properties and the manufacturing methods of biomaterials used in bone tissue engineering, and provides an overview of bone tissue regeneration approaches of scaffold and dental stem cell combinations as well as their limitations.

Rat bone healing induced by natural nanocrystalline carbonated hydroxyapatite in combination with human amniotic fluid stem cells (AFSCs)

The present study was aimed at identifying a new scaffold/stem cell combination useful to treat large bone defects. Human amniotic fluid stem cells (AFSCs) were expanded in vitro, labeled with a fluorescent cell-permeable dye (PKH26) and transplanted in vivo in a femoral injured rat model. The femoral defect was left untreated (control rats) or filled with hydroxyapatite (HA; natural nanocrystalline carbonated hydroxyapatite-Orthoss®) scaffold alone or loaded with PKH26-labeled AFSCs. All animals were killed 3 weeks after implantation. Both gross anatomy and histological observations revealed a major bone regenerative response in rat specimens treated with HA scaffold, alone or supplemented with AFSCs. Samples injected with HA plus AFSCs displayed the presence of abundant fibrotic tissue, the formation of periosteal woven bone, and an increased presence of blood vessels in the bone marrow, with still fluorescent AFSCs in close proximity. These observations provide evidence that natural HA plus AFSCs represents a promising alternative therapeutic strategy to autologous bone grafting procedures.

Nanotechnology and stem cells in vascular biology

Nanotechnology and stem cells are one of the most promising strategies for clinical medicine applications. The article provides an up-to-date view on advances in the field of regenerative and targeted vascular therapies describing a molecular design (propulsion mechanism, composition, target identification) and applications of nanorobots. Stem cell paragraph presents current clinical application of various cell types involved in vascular biology including mesenchymal stem cells, very small embryonic-like stem cells, induced pluripotent stem cells, mononuclear stem cells, amniotic fluid-derived stem cells and endothelial progenitor cells. A possible bridging between the two fields is also envisioned, where bio-inspired, safe, long-lasting nanorobots can fully target the cellular specific cues and even drive vascular process in a timely manner.

Vascularization Strategies in the Prevention of Nonunion Formation

Delayed healing and nonunion formation are major challenges in orthopedic surgery, which require the development of novel treatment strategies. Vascularization is considered one of the major prerequisites for successful bone healing, providing an adequate nutrient supply and allowing the infiltration of progenitor cells to the fracture site. Hence, during the last decade, a considerable number of studies have focused on the evaluation of vascularization strategies to prevent or to treat nonunion formation. These involve (1) biophysical applications, (2) systemic pharmacological interventions, and (3) tissue engineering, including sophisticated scaffold materials, local growth factor delivery systems, cell-based techniques, and surgical vascularization approaches. Accumulating evidence indicates that in nonunions, these strategies are indeed capable of improving the process of bone healing. The major challenge for the future will now be the translation of these strategies into clinical practice to make them accessible for the majority of patients. If this succeeds, these vascularization strategies may markedly reduce the incidence of nonunion formation. Impact statement Delayed healing and nonunion formation are a major clinical problem in orthopedic surgery. This review provides an overview of vascularization strategies for the prevention and treatment of nonunions. The successful translation of these strategies in clinical practice is of major importance to achieve adequate bone healing.

Repair of rat cranial bone defect by using amniotic fluid-derived mesenchymal stem cells in polycaprolactone fibrous scaffolds and platelet-rich plasma

Introduction: Tissue regenerative medicine strategies, as a promising alternative has become of major interest to the reconstruction of critical size bone defects. This study evaluated the effects of the simultaneous application of polycaprolactone (PCL), amniotic fluid mesenchymal stem cells (AF-MSCs) and platelet-rich plasma (PRP) on the repair of rat cranial bone defects. Methods: The AF-MSCs were isolated at the end of the second week of pregnancy in rats. PRP obtained from rat blood and the random PCL fibrous scaffolds were prepared using the electrospinning method. Circular full thickness (5 mm) bone defects were developed on both sides of the parietal bones (animal number=24) and the scaffolds containing AF-MSCs and PRP were implanted in the right lesions. Thereafter, after eight weeks the histological and immunohistochemistry studies were performed to evaluate the bone formation and collagen type I expression. Results: The spindle-shaped mesenchymal stem cells were isolated and the electron microscope images indicated the preparation of a random PCL scaffold. Immunohistochemical findings showed that collagen type I was expressed by AF-MSCs cultured on the scaffold. The results of hematoxylin and eosin (H&E) staining indicated the formation of blood vessels in the presence of PRP. Additionally, immunofluorescence findings suggested that PRP had a positive effect on collagen type I expression. Conclusion: The simultaneous application of fibrous scaffold + AF-MSCs + PRP has positive effects on bone regeneration. This study showed that PRP can affect the formation of new blood vessels in the scaffold transplanted in the bone defect.

Human amniotic fluid stem cells attract osteoprogenitor cells in bone healing

Current treatments of large bone defects are based on autologous or allogenic bone transplantation. Human amniotic fluid stem cells (hAFSCs) were evaluated for their potential in bone regenerative medicine. In this study, hAFSCs were transduced with lentiviral vector harboring red fluorescent protein to investigate their role in the regeneration of critical-size bone defects in calvarial mouse model. To distinguish donor versus recipient cells, a transgenic mouse model carrying GFP fluorescent reporter was used as recipient to follow the fate of hAFSCs transplanted in vivo into Healos® scaffold. Our results showed that transduced hAFSCs can be tracked in vivo directly at the site of transplantation. The presence of GFP positive cells in the scaffold at 3 and 6 weeks after transplantation indicates that donor hAFSCs can recruit host cells during the repair process. These observations help clarify the role of hAFSCs in bone tissue repair.

Neural crest derived stem cells from dental pulp and tooth-associated stem cells for peripheral nerve regeneration

The peripheral nerve injuries, representing some of the most common types of traumatic lesions affecting the nervous system, are highly invalidating for the patients besides being a huge social burden. Although peripheral nervous system owns a higher regenerative capacity than does central nervous system, mostly depending on Schwann cells intervention in injury repair, several factors determine the extent of functional outcome after healing. Based on the injury type, different therapeutic approaches have been investigated so far. Nerve grafting and Schwann cell transplantation have represented the gold standard treatment for peripheral nerve injuries, however these approaches own limitations, such as scarce donor nerve availability and donor site morbidity. Cell based therapies might provide a suitable tool for peripheral nerve regeneration, in fact, the ability of different stem cell types to differentiate towards Schwann cells in combination with the use of different scaffolds have been widely investigated in animal models of peripheral nerve injuries in the last decade. Dental pulp is a promising cell source for regenerative medicine, because of the ease of isolation procedures, stem cell proliferation and multipotency abilities, which are due to the embryological origin from neural crest. In this article we review the literature concerning the application of tooth derived stem cell populations combined with different conduits to peripheral nerve injuries animal models, highlighting their regenerative contribution exerted through either glial differentiation and neuroprotective/neurotrophic effects on the host tissue.

Comparison of the therapeutic effect of amniotic fluid stem cells and their exosomes on monoiodoacetate-induced animal model of osteoarthritis

The cartilage tissue engineering associated with stem cell-related therapies is becoming very interesting since adult articular cartilage has limited intrinsic capacity for regeneration upon injury. Amniotic fluid stem cells (AFSC) have been shown to produce exosomes with growth factors and immunomodulating molecules that could stop tissue degradation and induce cartilage repair. Based on this state of the art, the main aim of this study was to explore the efficacy of the secreted exosomes, compared to their AFSC source, in MIA-induced animal model of osteoarthritis mimicking a chronic and degenerative process, where inflammation is also involved and lead to irreversible joint damage. Exosomes, obtained by the use of a commercial kit, prior to the injection in animal knee joints, were characterized for the presence of typical markers and HGF, TGFβ, and IDO. Then, analyses were performed by histology, immunohistochemistry, and behavioral scoring up to 3 weeks after the treatment. Exosome-treated defects showed enhanced pain tolerance level and improved histological scores than the AFSC-treated defects. Indeed by 3 weeks, TGFβ-rich exosome samples induced an almost complete restoration of cartilage with good surface regularity and with the characteristic of hyaline cartilage. Moreover, cells positive for resolving macrophage marker were more easily detectable into exosome-treated joints. Therefore, a modulating role for exosomes on macrophage polarization is conceivable, as demonstrated also by experiments performed on THP1 macrophages. In conclusion, this study demonstrates for the first time the efficacy of human AFSC exosomes in counteract cartilage damage, showing a positive correlation with their TGFβ content.

Regenerative potential of human dental pulp stem cells in the treatment of stress urinary incontinence: In vitro and in vivo study

Objectives

To evaluate the regenerative potential of human dental pulp stem cells (hDPSCs) in an animal model of stress urinary incontinence (SUI). SUI, an involuntary leakage of urine, is due to physical stress involving an increase in bladder pressure and a damage of external urethral sphincter affecting muscles and nerves. Conventional therapies can only relieve the symptoms. Human DPSCs are characterized by peculiar stemness and immunomodulatory properties and might provide an alternative tool for SUI therapy.

Materials and methods

In vitro phase: hDPSCs were induced towards the myogenic commitment following a 24 hours pre‐conditioning with 5‐aza‐2′‐deoxycytidine (5‐Aza), then differentiation was evaluated. In vivo phase: pudendal nerve was transected in female rats to induce stress urinary incontinence; then, pre‐differentiated hDPSCs were injected in the striated urethral sphincter. Four weeks later, urethral sphincter regeneration was assayed through histological, functional and immunohistochemical analyses.

Results

Human DPSCs were able to commit towards myogenic lineage in vitro and, four weeks after cell injection, hDPSCs engrafted in the external urethral sphincter whose thickness was almost recovered, committed towards myogenic lineage in vivo, promoted vascularization and an appreciable recovery of the continence. Moreover, hDPSCs were detected within the nerve, suggesting their participation in repair of transected nerve.

Conclusions

These promising data and further investigations on immunomodulatory abilities of hDPSCs would allow to make them a potential tool for alternative therapies of SUI.

Human menstrual blood: a renewable and sustainable source of stem cells for regenerative medicine

Stem cells (SCs) play an important role in autologous and even allogenic applications. Menstrual blood discharge has been identified as a valuable source of SCs which are referred to as menstrual blood-derived stem cells (MenSCs). Compared to SCs from bone marrow and adipose tissues, MenSCs come from body discharge and obtaining them is non-invasive to the body, they are easy to collect, and there are no ethical concerns. There is, hence, a growing interest in the functions of MenSCs and their potential applications in regenerative medicine. This review presents recent progress in research into MenSCs and their potential application. Clinical indications of using MenSCs for various regenerative medicine applications are emphasized, and future research is recommended to accelerate clinical applications of MenSCs.

Stem/Progenitor Cells and Their Therapeutic Application in Cardiovascular Disease

Cardiovascular disease is the leading cause of death in the world. The stem/progenitor cell-based therapy has emerged as a promising approach for the treatment of a variety of cardiovascular diseases including myocardial infarction, stroke, peripheral arterial disease, and diabetes. An increasing number of evidence has shown that stem/progenitor cell transplantation could replenish damaged cells, improve cardiac and vascular functions, and repair injured tissues in many pre-clinical studies and clinical trials. In this review, we have outlined the major types of stem/progenitor cells, and summarized the studies in applying these cells, especially endothelial stem/progenitor cells and their derivatives, in the treatment of cardiovascular disease. Here the strategies used to improve the stem/progenitor cell-based therapies in cardiovascular disease and the challenges with these therapies in clinical applications are also reviewed.

Tissue Engineering and Cell-Based Therapies for Fractures and Bone Defects

Bone fractures and segmental bone defects are a significant source of patient morbidity and place a staggering economic burden on the healthcare system. The annual cost of treating bone defects in the US has been estimated to be $5 billion, while enormous costs are spent on bone grafts for bone injuries, tumors, and other pathologies associated with defective fracture healing. Autologous bone grafts represent the gold standard for the treatment of bone defects. However, they are associated with variable clinical outcomes, postsurgical morbidity, especially at the donor site, and increased surgical costs. In an effort to circumvent these limitations, tissue engineering and cell-based therapies have been proposed as alternatives to induce and promote bone repair. This review focuses on the recent advances in bone tissue engineering (BTE), specifically looking at its role in treating delayed fracture healing (non-unions) and the resulting segmental bone defects. Herein we discuss: (1) the processes of endochondral and intramembranous bone formation; (2) the role of stem cells, looking specifically at mesenchymal (MSC), embryonic (ESC), and induced pluripotent (iPSC) stem cells as viable building blocks to engineer bone implants; (3) the biomaterials used to direct tissue growth, with a focus on ceramic, biodegradable polymers, and composite materials; (4) the growth factors and molecular signals used to induce differentiation of stem cells into the osteoblastic lineage, which ultimately leads to active bone formation; and (5) the mechanical stimulation protocols used to maintain the integrity of the bone repair and their role in successful cell engraftment. Finally, a couple clinical scenarios are presented (non-unions and avascular necrosis—AVN), to illustrate how novel cell-based therapy approaches can be used. A thorough understanding of tissue engineering and cell-based therapies may allow for better incorporation of these potential therapeutic approaches in bone defects allowing for proper bone repair and regeneration.

Dental pulp stem cells for bone tissue engineering: a review of the current literature and a look to the future

The aim of this narrative review is to investigate the implication of mesenchymal stem cells harvested from human dental pulp in in vivo bone tissue regeneration. We focused on studies related to roles of human dental pulp stem cells in in vivo bone regeneration. A total of 1021 studies were identified; after the assessment of eligibility, only 39 studies were included in the review. The evaluated information of the studies regards the experimental strategies (e.g., the isolation method, the scaffold, the in vivo animal models). The overall main evidences highlighted from the analysis are that dental pulp stem cells and human-exfoliated deciduous teeth stem cells supported by a suitable scaffold should be considered a valuable source for bone tissue regeneration.

Bioactive Sr(II)/Chitosan/Poly(ε-caprolactone) Scaffolds for Craniofacial Tissue Regeneration. In Vitro and In Vivo Behavior

In craniofacial tissue regeneration, the current gold standard treatment is autologous bone grafting, however, it presents some disadvantages. Although new alternatives have emerged there is still an urgent demand of biodegradable scaffolds to act as extracellular matrix in the regeneration process. A potentially useful element in bone regeneration is strontium. It is known to promote stimulation of osteoblasts while inhibiting osteoclasts resorption, leading to neoformed bone. The present paper reports the preparation and characterization of strontium (Sr) containing hybrid scaffolds formed by a matrix of ionically cross-linked chitosan and microparticles of poly(ε-caprolactone) (PCL). These scaffolds of relatively facile fabrication were seeded with osteoblast-like cells (MG-63) and human bone marrow mesenchymal stem cells (hBMSCs) for application in craniofacial tissue regeneration. Membrane scaffolds were prepared using chitosan:PCL ratios of 1:2 and 1:1 and 5 wt % Sr salts. Characterization was performed addressing physico-chemical properties, swelling behavior, in vitro biological performance and in vivo biocompatibility. Overall, the composition, microstructure and swelling degree (≈245%) of scaffolds combine with the adequate dimensional stability, lack of toxicity, osteogenic activity in MG-63 cells and hBMSCs, along with the in vivo biocompatibility in rats allow considering this system as a promising biomaterial for the treatment of craniofacial tissue regeneration.

Dental pulp stem cells for bone tissue engineering: a review of the current literature and a look to the future

The aim of this narrative review is to investigate the implication of mesenchymal stem cells harvested from human dental pulp in in vivo bone tissue regeneration. We focused on studies related to roles of human dental pulp stem cells in in vivo bone regeneration. A total of 1021 studies were identified; after the assessment of eligibility, only 39 studies were included in the review. The evaluated information of the studies regards the experimental strategies (e.g., the isolation method, the scaffold, the in vivo animal models). The overall main evidences highlighted from the analysis are that dental pulp stem cells and human-exfoliated deciduous teeth stem cells supported by a suitable scaffold should be considered a valuable source for bone tissue regeneration.

The use of human dental pulp stem cells for in vivo bone tissue engineering: A systematic review

Dental pulp represents a promising and easily accessible source of mesenchymal stem cells for clinical applications. Many studies have investigated the use of human dental pulp stem cells and stem cells isolated from the dental pulp of human exfoliated deciduous teeth for bone tissue engineering in vivo. However, the type of scaffold used to support the proliferation and differentiation of dental stem cells, the animal model, the type of bone defect created, and the methods for evaluation of results were extremely heterogeneous among these studies conducted. With this issue in mind, the main objective of this study is to present and summarize, through a systematic review of the literature, in vivo studies in which the efficacy of human dental pulp stem cells and stem cells from human exfoliated deciduous teeth (SHED) for bone regeneration was evaluated. The article search was conducted in PubMed/MEDLINE and Web of Science databases. Original research articles assessing potential of human dental pulp stem cells and SHED for in vivo bone tissue engineering, published from 1984 to November 2017, were selected and evaluated in this review according to the following eligibility criteria: published in English, assessing dental stem cells of human origin and evaluating in vivo bone tissue formation in animal models or in humans. From the initial 1576 potentially relevant articles identified, 128 were excluded due to the fact that they were duplicates and 1392 were considered ineligible as they did not meet the inclusion criteria. As a result, 56 articles remained and were fully analyzed in this systematic review. The results obtained in this systematic review open new avenues to perform bone tissue engineering for patients with bone defects and emphasize the importance of using human dental pulp stem cells and SHED to repair actual bone defects in an appropriate animal model.

Craniofacial Tissue Engineering

The craniofacial complex is composed of fundamental components such as blood vessels and nerves, and also a variety of specialized tissues such as craniofacial bones, cartilages, muscles, ligaments, and the highly specialized and unique organs, the teeth. Together, these structures provide many functions including speech, mastication, and aesthetics of the craniofacial complex. Craniofacial defects not only influence the structure and function of the jaws and face, but may also result in deleterious psychosocial issues, emphasizing the need for rapid and effective, precise, and aesthetic reconstruction of craniofacial tissues. In a broad sense, craniofacial tissue reconstructions share many of the same issues as noncraniofacial tissue reconstructions. Therefore, many concepts and therapies for general tissue engineering can and have been used for craniofacial tissue regeneration. Still, repair of craniofacial defects presents unique challenges, mainly because of their complex and unique 3D geometry.

Dental Stem Cells in Bone Tissue Engineering: Current Overview and Challenges

The treatment of bone that is impaired due to disease, trauma or tumor resection creates a challenge for both clinicians and researchers. Critical size bone defects are conventionally treated with autografts which are associated with risks such as donor site morbidity and limitations like donor shortage. Bone tissue engineering has become a promising area for the management of critical size bone defects by the employment of biocompatible materials and the discovery of novel stem cell sources. Mesenchymal stem cells (MSCs) can be isolated with ease from various dental tissues including dental pulp stem cells, stem cells from apical papilla, dental follicle stem cells, stem cells from human exfoliated deciduous teeth, periodontal ligament stem cells, gingival stem cells and tooth germ derived stem cells. Outcomes of dental MSC mediated bone tissue engineering is explored in various in vivo and in vitro preclinical studies. However, there are still obscurities regarding the mechanisms underlying in MSC mediated bone regeneration and challenges in applications of dental stem cells. In this review, we summarized dental stem cell sources and their characterizations, along with currently used biomaterials for cell delivery and future perspectives for dental MSCs in the field of bone tissue engineering. Further efforts are necessary before moving to clinical trials for future applications.

Osteogenic prospective of deriving human dental stem cells in collagen matrix boost

Stem cells derived from oral tissue represent a highly attractive alternative source for clinical bone regeneration because they can be collected by non-invasive or minimally invasive procedures. Herein, we describe the human dental stem cells (DSCs) deriving from buccal fat pads (BFP), dental pulp (DP) of impacted teeth, and periodontal ligaments (PDL) to obtain BFPSCs, DPSCs, and PDLSCs, respectively. Cells were purified with selected medium and expanded through passages in stem cell culture medium. Purified cells were characterized for stemness by their growth rate, immunostaining, and multilineage differentiation ability. They showed plastic adherence, expression of stemness-specific markers, and multilineage differentiation potential. Immunocytochemistry analysis confirmed that DPSCs had more osteogenic potential than BFSCs and PDLSCs. Calcium-rich deposits, evaluated by von Kossa and Alizarin red staining, showed greater mineralization when DPSCs were cultured on collagen type I matrix than without collagen. Furthermore, DPSC-seeded collagen type I matrix maintained consistent osteogenesis and boosted mineral formation by 1-2 weeks over that in DPSCs cultured without collagen. Radiographic analysis of DPSC-seeded collagen type I matrix transplanted into rat cranial defects showed significant bone regeneration after 8 weeks. These results suggested that the redundant oral tissue can be used as a source of adult multipotent stem cells for clinical bone regeneration. Triple overlay images with biomarkers (red), nuclei (blue) and bright field morphology of DPSCs. The specifically osteo-differentiation shown by osteocalcin (left) expression and lack of sox9 (right) expressed in the images below which were cultured with collagen matrix, contrast with no collagen matrix group above.

Adult Stem Cells of Orofacial Origin: Current Knowledge and Limitation and Future Trend in Regenerative Medicine

Stem cell research is one of the most rapidly expanding field of medicine which provides significant opportunities for therapeutic and regenerative applications. Different types of stem cells have been isolated investigating their accessibility, control of the differentiation pathway and additional immunomodulatory properties. Bulk of the literature focus has been on the study and potential applications of adult stem cells (ASC) because of their low immunogenicity and reduced ethical considerations. This review paper summarizes the basic available literature on different types of ASC with special focus on stem cells from dental and orofacial origin. ASC have been isolated from different sources, however, isolation of ASC from orofacial tissues has provided a novel promising alternative. These cells offer a great potential in the future of therapeutic and regenerative medicine because of their remarkable availability at low cost while allowing minimally invasive isolation procedures. Furthermore, their immunomodulatory and anti-inflammatory potential is of particular interest. However, there are conflicting reports in the literature regarding their particular biology and full clinical potentials. Sound knowledge and higher control over proliferation and differentiation mechanisms are prerequisites for clinical applications of these cells. Therefore, further standardized basic and translational studies are required to increase the reproducibility and reduce the controversies of studies, which in turn facilitate comparison of related literature and enhance further development in the field.

Bioinspired Collagen Scaffolds in Cranial Bone Regeneration: From Bedside to Bench

Calvarial defects are common reconstructive dilemmas secondary to a variety of etiologies including traumatic brain injury, cerebrovascular disease, oncologic resection, and congenital anomalies. Reconstruction of the calvarium is generally undertaken for the purposes of cerebral protection, contour restoration for psychosocial well-being, and normalization of neurological dysfunction frequently found in patients with massive cranial defects. Current methods for reconstruction using autologous grafts, allogeneic grafts, or alloplastic materials have significant drawbacks that are unique to each material. The combination of wide medical relevance and the need for a better clinical solution render defects of the cranial skeleton an ideal target for development of regenerative strategies focused on calvarial bone. With the improved understanding of the instructive properties of tissue-specific extracellular matrices and the advent of precise nanoscale modulation in materials science, strategies in regenerative medicine have shifted in paradigm. Previously considered to be simple carriers of stem cells and growth factors, increasing evidence exists for differential materials directing lineage specific differentiation of progenitor cells and tissue regeneration. In this work, we review the clinical challenges for calvarial reconstruction, the anatomy and physiology of bone, and extracellular matrix-inspired, collagen-based materials that have been tested for in vivo cranial defect healing.

Low-level laser therapy (780 nm) combined with collagen sponge scaffold promotes repair of rat cranial critical-size defects and increases TGF-β, FGF-2, OPG/RANK and osteocalcin expression

The aim of this study was to evaluate the effect of collagen sponge scaffold (CSS) implantation associated with low-level laser therapy (LLLT) on repairing bone defects. A single 5-mm cranial defect was surgically created in forty Wistar rats, which then received one of the following four interventions (n = 10 per group): no treatment (G0); bone defect implanted with collagen sponge scaffold (CSS) alone (G1); defect treated with low-level laser therapy (LLLT) (wavelength 780 nm; total energy density 120 J/cm² ; power 50 mW) alone (G2); and CSS associated with LLLT treatment (G3). After surgery, animals in each group were euthanized at 21 days and 30 days (n = 5 per euthanasia time group). Bone formation was monitored by X-ray imaging analysis. Biopsies were collected and processed for histological analysis and immunohistochemical evaluation of transforming growth factor-beta (TGF-β), fibroblast growth factor-2 (FGF-2), osteoprotegerin (OPG) and receptor activator of nuclear factor ƙ (RANK). Osteocalcin (OCN) was detected by immunofluorescence analysis. Compared to the G0 group, defects in the 30-day G3 group exhibited increased bone formation, both by increase in radiopaque areas (P < 0.01) and by histomorphometric analysis (P < 0.001). The histopathological analysis showed a decreased number of inflammatory cells (P < 0.001). The combined CCS + LLLT (G3) treatment also resulted in the most intense immunostaining for OPG, RANK, FGF-2 and TGF-β, and the most intense and diffuse OCN immunofluorescent labelling at 30 days postsurgery (G3 vs. G0 group, P < 0.05). Therefore, the use of CCS associated with LLLT could offer a synergistic advantage in improving the healing of bone fractures.

Taking the endochondral route to craniomaxillofacial bone regeneration: A logical approach?

The current golden standard for treatment of craniomaxillofacial critical size bone defects, autologous bone grafting, is associated with several disadvantages which have prompted an increased demand for alternatives. New solutions are emerging in the form of bone tissue engineering. This involves harvesting of multipotent mesenchymal stromal cells (MSCs), after which they can be differentiated towards the osteogenic lineage mimicking intramembranous bone formation. However, translating this approach from laboratory to clinic has met with limited success. Consequently, attention has shifted towards investigation of the alternative endochondral route of bone regeneration. At a first glance, this approach may not appear logical for maxillofacial bone regeneration as most bones in the face originate from intramembranous mechanisms. Therefore, the goal of this review is to discuss the sense and non-sense of exploring endochondral bone regeneration as a novel reconstructive option for craniomaxillofacial bone defects. The embryological origin of craniomaxillofacial bone structures and their repair mechanisms are introduced. Also, the potential of MSC-like cells, the neural crest-derived stem cells from craniomaxillofacial sources, are discussed with a focus on regeneration of bone defects. Further, the current status of endochondral bone regeneration from MSCs is highlighted. Together, these aspects contribute in answering whether endochondral bone regeneration can be a logical approach to restore craniomaxillofacial bone defects.

Application of Stem Cells in Oral Disease Therapy: Progresses and Perspectives

Stem cells are undifferentiated and pluripotent cells that can differentiate into specialized cells with a more specific function. Stem cell therapies become preferred methods for the treatment of multiple diseases. Oral and maxillofacial defect is one kind of the diseases that could be most possibly cured by stem cell therapies. Here we discussed oral diseases, oral adult stem cells, iPS cells, and the progresses/challenges/perspectives of application of stem cells for oral disease treatment.

Artificial Bone via Bone Tissue Engineering: Current Scenario and Challenges

Bone provides mechanical support, and flexibility to the body as a structural frame work along with mineral storage, homeostasis, and blood pH regulation. The repair and/or replacement of injured or defective bone with healthy bone or bone substitute is a critical problem in orthopedic treatment. Recent advances in tissue engineering have shown promising results in developing bone material capable of substituting the conventional autogenic or allogenic bone transplants. In the present review, we have discussed natural and synthetic scaffold materials such as metal and metal alloys, ceramics, polymers, etc. which are widely being used along with their cellular counterparts such as stem cells in bone tissue engineering with their pros and cons.

Therapeutic potential of dental stem cells

Stem cell biology has become an important field in regenerative medicine and tissue engineering therapy since the discovery and characterization of mesenchymal stem cells. Stem cell populations have also been isolated from human dental tissues, including dental pulp stem cells, stem cells from human exfoliated deciduous teeth, stem cells from apical papilla, dental follicle progenitor cells, and periodontal ligament stem cells. Dental stem cells are relatively easily obtainable and exhibit high plasticity and multipotential capabilities. The dental stem cells represent a gold standard for neural-crest-derived bone reconstruction in humans and can be used for the repair of body defects in low-risk autologous therapeutic strategies. The bioengineering technologies developed for tooth regeneration will make substantial contributions to understand the developmental process and will encourage future organ replacement by regenerative therapies in a wide variety of organs such as the liver, kidney, and heart. The concept of developing tooth banking and preservation of dental stem cells is promising. Further research in the area has the potential to herald a new dawn in effective treatment of notoriously difficult diseases which could prove highly beneficial to mankind in the long run.

Accelerated craniofacial bone regeneration through dense collagen gel scaffolds seeded with dental pulp stem cells

Therapies using mesenchymal stem cell (MSC) seeded scaffolds may be applicable to various fields of regenerative medicine, including craniomaxillofacial surgery. Plastic compression of collagen scaffolds seeded with MSC has been shown to enhance the osteogenic differentiation of MSC as it increases the collagen fibrillary density. The aim of the present study was to evaluate the osteogenic effects of dense collagen gel scaffolds seeded with mesenchymal dental pulp stem cells (DPSC) on bone regeneration in a rat critical-size calvarial defect model. Two symmetrical full-thickness defects were created (5 mm diameter) and filled with either a rat DPSC-containing dense collagen gel scaffold (n = 15), or an acellular scaffold (n = 15). Animals were imaged in vivo by microcomputer tomography (Micro-CT) once a week during 5 weeks, whereas some animals were sacrificed each week for histology and histomorphometry analysis. Bone mineral density and bone micro-architectural parameters were significantly increased when DPSC-seeded scaffolds were used. Histological and histomorphometrical data also revealed significant increases in fibrous connective and mineralized tissue volume when DPSC-seeded scaffolds were used, associated with expression of type I collagen, osteoblast-associated alkaline phosphatase and osteoclastic-related tartrate-resistant acid phosphatase. Results demonstrate the potential of DPSC-loaded-dense collagen gel scaffolds to benefit of bone healing process.

Stem Cells of Dental Origin: Current Research Trends and Key Milestones towards Clinical Application

Dental Mesenchymal Stem Cells (MSCs), including Dental Pulp Stem Cells (DPSCs), Stem Cells from Human Exfoliated Deciduous teeth (SHED), and Stem Cells From Apical Papilla (SCAP), have been extensively studied using highly sophisticated in vitro and in vivo systems, yielding substantially improved understanding of their intriguing biological properties. Their capacity to reconstitute various dental and nondental tissues and the inherent angiogenic, neurogenic, and immunomodulatory properties of their secretome have been a subject of meticulous and costly research by various groups over the past decade. Key milestone achievements have exemplified their clinical utility in Regenerative Dentistry, as surrogate therapeutic modules for conventional biomaterial-based approaches, offering regeneration of damaged oral tissues instead of simply “filling the gaps.” Thus, the essential next step to validate these immense advances is the implementation of well-designed clinical trials paving the way for exploiting these fascinating research achievements for patient well-being: the ultimate aim of this ground breaking technology. This review paper presents a concise overview of the major biological properties of the human dental MSCs, critical for the translational pathway “from bench to clinic.”

Estrogen receptor signaling in the ferutinin-induced osteoblastic differentiation of human amniotic fluid stem cells

AIMS

Ferutinin is a diaucane sesquiterpene with a high estrogenic activity. Since ferutinin is able to enhance osteoblastic differentiation of human amniotic fluid stem cells (hAFSCs), the aim of this study was to evaluate the role of the estrogen receptors α (ERα) and G-protein coupled receptor 30 (GPR30) in ferutinin-mediated osteoblastic differentiation. Moreover, it was investigated if MEK/ERK and PI3K/Akt signaling pathways are involved in ferutinin-induced effects.

MAIN METHODS

hAFSCs were cultured in a standard medium or in an osteoblastic medium for 14 or 21days and ferutinin was added at 10^-8M. Immunofluorescence techniques and Western-blot 21analysis were used to study estrogen receptors and signaling pathways.

KEY FINDINGS

In both undifferentiated and differentiated hAFSCs we identified ERα and GPR30 with a nuclear or cytoplasmatic localization, respectively. The presence of ferutinin in the osteoblastic medium leads to an increase in ERα expression. To dissect the role of estrogen receptors, MPP and G15 were used to selectively block ERα and GPR30, respectively. Notably, ferutinin enhanced osteoblastic differentiation in cells challenged with G15. Ferutinin was able to increase ERK and Akt phosphorylations with a different timing activation. These phosphorylations were antagonized by PD0325901, a MEK inhibitor, and wortmannin, a PI3K inhibitor. Both MPP and G15 inhibited the ferutinin-induced MEK/ERK and PI3K/Akt pathway activations. In the osteoblastic condition, PD0325901, but not wortmannin, reduced the expression of OPN and RUNX-2, whereas ferutinin abrogated the down-modulation triggered by PD0325901.

SIGNIFICANCE

PI3K/Akt pathways seems to mediate the enhancement of hAFSCs osteoblastic differentiation triggered by ferutinin through ERα.

Optimized Cryopreservation and Banking of Human Bone-Marrow Fragments and Stem Cells

Adult mesenchymal stem cells are a promising source for cell therapies and tissue engineering applications. Current procedures for banking of human bone-marrow mesenchymal stem cells (hBM-MSCs) require cell isolation and expansion, and thus the use of large amounts of animal sera. However, animal-derived culture supplements have the potential to trigger infections and severe immune reactions. The aim of this study was to investigate an optimized method for cryopreservation of human bone-marrow fragments for application in cell banking procedures where stem-cell expansion and use are not immediately needed. Whole trabecular fragments enclosing the bone marrow were stored in liquid nitrogen for 1 year in a cryoprotective solution containing a low concentration of dimethyl sulfoxide and a high concentration of human serum (HuS). After thawing, the isolation, colony-forming-unit ability, proliferation, morphology, stemness-related marker expression, cell senescence, apoptosis, and multi-lineage differentiation potential of hBM-MSCs were tested in media containing HuS compared with hBM-MSCs isolated from fresh fragments. Human BM-MSCs isolated from cryopreserved fragments expressed MSC markers until later passages, had a good proliferation rate, and exhibited the capacity to differentiate toward osteogenic, adipogenic, and myogenic lineages similar to hBM-MSCs isolated from fresh fragments. Moreover, the cryopreservation method did not induce cell senescence or cell death. These results imply that minimal processing may be adequate for the banking of tissue samples with no requirement for the immediate isolation and use of hBM-MSCs, thus limiting cost and the risk of contamination, and facilitating banking for clinical use. Furthermore, the use of HuS for cryopreservation and expansion/differentiation has the potential for clinical application in compliance with good manufacturing practice standards.

Regenerative Applications Using Tooth Derived Stem Cells in Other Than Tooth Regeneration: A Literature Review

Tooth derived stem cells or dental stem cells are categorized according to the location from which they are isolated and represent a promising source of cells for regenerative medicine. Originally, as one kind of mesenchymal stem cells, they are considered an alternative of bone marrow stromal cells. They share many commonalties but maintain differences. Considering their original function in development and the homeostasis of tooth structures, many applications of these cells in dentistry have aimed at tooth structure regeneration; however, the application in other than tooth structures has been attempted extensively. The availability from discarded or removed teeth can be an innate benefit as a source of autologous cells. Their origin from the neural crest results in exploitation of neurological and numerous other applications. This review briefly highlights current and future perspectives of the regenerative applications of tooth derived stem cells in areas beyond tooth regeneration.