Lecithin organogels as a potential phospholipid-structured system for topical drug delivery: a review

Gels as Promising Delivery Systems: Physicochemical Property Characterization and Recent Applications

Gels constitute a versatile class of materials with considerable potential for applications in both technical and medical domains. Physicochemical property characterization is a critical evaluation method for gels. Common characterization techniques include pH measurement, structural analysis, mechanical property assessment, rheological analysis, and phase transition studies, among others. While numerous research articles report characterization results, few reviews comprehensively summarize the appropriate numerical ranges for these properties. This lack of standardization complicates harmonized evaluation methods and hinders direct comparisons between different gels. To address this gap, it is essential to systematically investigate characterization methods and analyze data from the extensive body of literature on gels. In this review, we provide a comprehensive summary of general characterization methods and present a detailed analysis of gel characterization data to support future research and promote standardized evaluation protocols.

Quality by design optimization of formulation variables and process parameters for enhanced transdermal delivery of nanosuspension

This investigation aims to fabricate, characterize, and optimize organogel containing andrographolide nanosuspension to enhance transdermal drug delivery into and across the skin in vitro. We identified the critical material attributes (CMAs) and critical process parameters (CPPs) that impact key characteristics of andrographolide nanosuspension using a systematic quality-by-design approach. We prepared andrographolide nanosuspension using the wet milling technique and evaluated various properties of the formulations. The CMAs were types and concentrations of polymers, types and concentrations of surfactants, drug concentration, and lipid concentration. The CPPs were volume of milling media and milling duration. Mean particle size, polydispersity index, encapsulation efficiency, and drug loading capacity as critical quality attributes were selected in the design for the evaluation and optimization of the formulations. Furthermore, we developed and evaluated organogel formulation to carry andrographolide nanosuspension 0.05% w/w. Drug release and permeation studies were conducted to assess the drug release kinetics and transdermal delivery of andrographolide. We presented the alteration in the average particle size, polydispersity index, encapsulation efficiency, drug-loading capacity, and drug release among various formulations to select the optimal parameters. The permeation study indicated that organogel delivered markedly more drug into the receptor fluid and skin tissue than DMSO gel (n = 3, p < 0.05). This enhancement in transdermal drug delivery was demonstrated by cumulative drug permeation after 24 h, steady-state flux, permeability coefficient, and predicted steady-state plasma concentration. Drug quantity in skin layers, total delivery, delivery efficiency, and topical selectivity were also reported. Conclusively, andrographolide nanosuspension-loaded organogel significantly increased transdermal drug delivery in vitro.

Lecithin Organogel: A Promising Carrier for the Treatment of Skin Diseases

Skin is the largest organ of the human body, as it protects the body from the external environment. Nowadays, skin diseases and skin problems are more common, and millions of people are affected daily. Skin diseases are due to numerous infectious pathogens or inflammatory conditions. The increasing demand for theoretical research and practical applications has led to the rising prominence of gel as a semisolid material. To this end, organogels has been widely explored due to their unique composition, which includes organic solvents and mineral or vegetable oils, among others. Organogels can be described as semisolid systems wherein an organic liquid phase is confined within a three-dimensional framework consisting of self-assembled, cross-linked, or entangled gelator fibers. These gels have the ability to undergo significant expansion and retain substantial amounts of the liquid phase, reaching up to 99% swelling capacity. Furthermore, they respond to a range of physical and chemical stimuli, including temperature, light, pH, and mechanical deformation. Notably, due to their distinctive properties, they have aroused significant interest in a variety of practical applications. Organogels favor the significant encapsulation and enhanced permeation of hydrophobic molecules when compared with hydrogels. Accordingly, organogels are characterized into lecithin organogels, pluronic lecithin organogels, sorbitan monostearate-based organogels, and eudragit organogels, among others, based on the nature of their network and the solvent system. Lecithin organogels contain lecithin (natural and safe as a living cell component) as an organogelator. It acts as a good penetration enhancer. In this review, first we have summarized the fundamental concepts related to the elemental structure of organogels, including their various forms, distinctive features, methods of manufacture, and diverse applications. Nonetheless, this review also sheds light on the delivery of therapeutic molecules entrapped in the lecithin organogel system into deep tissue for the management of skin diseases and provides a synopsis of their clinical applications.

Mucoadhesive Polymeric Polyologels Designed for the Treatment of Periodontal and Related Diseases of the Oral Cavity

The study objective was to design and characterise herein unreported polyologels composed of a range of diol and triol solvents and polyvinyl methyl ether-co-maleic acid (PVM/MA) and, determine their potential suitability for the treatment of periodontal and related diseases in the oral cavity using suitable in vitro methodologies. Polyologel flow and viscoelastic properties were controlled by the choice of solvent and the concentration of polymer. At equivalent polymer concentrations, polyologels prepared with glycerol (a triol) exhibited the greatest elasticity and resistance to deformation. Within the diol solvents (PEG 400, pentane 1,5-diol, propane 1,2-diol, propane 1,3-diol, and ethylene glycol), PEG 400 polyologels possessed the greatest elasticity and resistance to deformation, suggesting the importance of distance of separation between the diol groups. Using Raman spectroscopy bond formation between the polymer carbonyl group and the diol hydroxyl groups was observed. Polyologel mucoadhesion was influenced by viscoelasticity; maximum mucoadhesion was shown by glycerol polyologels at the highest polymer concentration (20% w/w). Similarly, the choice of solvent and concentration of PVM/MA affected the release of tetracycline from the polyologels. The controlled release of tetracycline for at least 10 h was observed for several polyologels, which, in combination with their excellent mucoadhesion and flow properties, offer possibilities for the clinical use of these systems to treat diseases within the oral cavity.

Self-assembling Organogels Loaded with Tenoxicam for Local Intensive Pain and Inflammation Cure: In Vitro and In Vivo Correlation

Due to tenoxicam (TX)'s poor aqueous solubility (0.072 mg/ml), it is poorly absorbable in the GIT, and the long-term oral administration of TX may cause severe GIT disturbances. Topical administration of TX can help in bypassing the GIT adverse effects. Therefore, in the present work, we constructed different pluronic/lecithin organogels (PLOs) for topical delivery of TX. PLO was constructed simply via direct mixing of an aqueous pluronic solution with lecithin solution. The prepared PLO formulations were characterized for their physicochemical properties including pH, drug content, visual inspection, viscosity, and spreadability. Also, the in vitro release and kinetic studies were carried out to investigate the mechanism of drug release. Moreover, the in vivo studies were carried out by investigating the anti-inflammatory and analgesic activities using albino male rats. The results showed that the modified PLOs have good physicochemical properties. The viscosity of the modified gels is a direct proportionality with both lecithin and pluronic concentrations. Also, subsequently, the drug release rate is directly proportional to gel viscosity. Moreover, the in vivo studies showed that the modified PLOs (F19) showed a significant ( < 0.05%) paw edema inhibition and pain analgesia compared with other investigated groups. Also, the results indicated that the increase in dose is accompanied by higher activity and a longer duration of action which extended to 12 h. Hence, the modified PLOs are promising safe candidates or vehicles for effective TX loading with sustained delivery behavior.

Rheological Properties and Composition Affecting the Skin Permeation of a Model of a Hydrophilic Drug in Lecithin Reverse Wormlike Micelles

We investigated the effect of the rheological properties and composition of lecithin reverse wormlike micelles (LRWs) on the skin permeation of a model of a hydrophilic drug to determine whether LRWs support uniform hydrophilic drug/oil-based formulations and good drug penetrate into skin. Here, we prepared LRWs with D (-)-ribose (RI) or glycerol (GL) as polar compounds, liquid paraffin (LP) or isopropyl myristate (IPM) as oils, and 6-carboxyfluorescein (CF) as a model for a hydrophilic drug, and evaluated the rheological properties and skin penetration characteristics of the preparations. The LRWs showed moderate viscosity at 25 °C, a typical storage temperature, but decreasing viscosity at 32 °C, the surface temperature of human skin, suggesting that the LRWs would penetrate the microstructure of skin (e.g., wrinkles and hair follicles). The highest skin permeability of CF was observed when IPM was used as the oil, suggesting that both the stratum corneum and hair follicle routes are involved in drug permeation. The penetration of CF into hair follicles is influenced not only by the rheology of the formulation but also by the interaction between IPM and sebum in the hair follicles.

Organogels: "GelVolution" in Topical Drug Delivery - Present and Beyond

Topical drug delivery holds immense significance in dermatological treatments due to its non-invasive nature and direct application to the target site. Organogels, a promising class of topical drug delivery systems, have acquired substantial attention for enhancing drug delivery efficiency. This review article aims to explore the advantages of organogels, including enhanced drug solubility, controlled release, improved skin penetration, non-greasy formulations, and ease of application. The mechanism of organogel permeation into the skin is discussed, along with formulation strategies, which encompass the selection of gelling agents, cogelling agents, and additives while considering the influence of temperature and pH on gel formation. Various types of organogelators and organogels and their properties, such as viscoelasticity, non-birefringence, thermal stability, and optical clarity, are presented. Moreover, the biomedical applications of organogels in targeting skin cancer, anti-inflammatory drug delivery, and antifungal drug delivery are discussed. Characterization parameters, biocompatibility, safety considerations, and future directions in optimizing skin permeation, ensuring long-term stability, addressing regulatory challenges, and exploring potential combination therapies are thoroughly examined. Overall, this review highlights the immense potential of organogels in redefining topical drug delivery and their significant impact on the field of dermatological treatments, thus paving the way for exciting prospects in the domain.

A review of different frying oils and oleogels as alternative frying media for fat-uptake reduction in deep-fat fried foods

Purpose

This review aims to examine the potential of oleogels as a frying medium to decrease oil absorption during deep-frying and enhance the nutritional and energy content of foods. By investigating the factors influencing oil incorporation during deep-frying and examining the application of oleogels in this process, we seek to provide insights into using oleogels as an alternative to traditional cooking oils.

Scope

Deep-frying, a widely used cooking method, leads to the retention of large amounts of oil in fried food, which has been associated with health concerns. To address this issue, researchers have investigated various methods to minimize oil absorption during frying. One promising approach is the use of oleogels, which are thermo-reversible, three-dimensional gel networks formed by entrapment of bulk oil with a low concentration (<10% of weight) of solid lipid materials known as oleogelators. This review will focus on the following aspects: a) an overview of deep-fried foods, b) factors influencing oil uptake and underlying mechanisms for oil absorption during deep-frying, c) the characterization and application of different frying oils and their oleogels in deep-fried foods, d) components of the oleogel system for deep-frying, and e) the health impact, oxidative stability, and sensory acceptability of using oleogels in deep-frying.

Key findings

The review highlights the potential of oleogels as a promising alternative frying medium to reduce fat absorption in deep-fried foods. Considering the factors influencing oil uptake during deep-frying, as well as exploring the properties and applications of different frying oils and their oleogels, can result in improved product qualities and heightened consumer acceptance. Moreover, oleogels offer the advantage of lower fat content in fried products, addressing health concerns associated with traditional deep-frying methods. The capacity to enhance the nutritional and energy profile of foods while preserving sensory qualities and oxidative stability positions oleogels as a promising choice for upcoming food processing applications.

Food gel-based systems for efficient delivery of bioactive ingredients: design to application

Food gels derived from natural biopolymers are valuable materials with significant scientific merit in the food industry because of their biocompatibility, safety, and environmental friendliness compared to synthetic gels. These gels serve as crucial delivery systems for bioactive ingredients. This review focuses on the selection, formulation, characterization, and behavior in gastrointestinal of hydrogels, oleogels, and bigels as delivery systems for bioactive ingredients. These three gel delivery systems exhibit certain differences in composition and can achieve the delivery of different bioactive ingredients. Hydrogels are suitable for delivering hydrophilic ingredients. Oleogels are an excellent choice for delivering lipophilic ingredients. Bigels contain both aqueous and oil phases, whose gelation makes their structure more stable, demonstrating the advantages of the above two types of gels. Besides, the formation and properties of the gel system are confirmed using different characterization methods. Furthermore, the changing behavior (e.g., swelling, disintegration, collapse, erosion) of the gel structure in the gastrointestinal is also analyzed, providing an opportunity to formulate soft substances that offer better protection or controlled release of bioactive components. This can further improve the transmissibility and utilization of bioactive substances, which is of great significance.

Niosome as an Effective Nanoscale Solution for the Treatment of Microbial Infections

Numerous disorders go untreated owing to a lack of a suitable drug delivery technology or an appropriate therapeutic moiety, particularly when toxicities and side effects are a major concern. Treatment options for microbiological infections are not fulfilled owing to significant adverse effects or extended therapeutic options. Advanced therapy options, such as active targeting, may be preferable to traditional ways of treating infectious diseases. Niosomes can be defined as microscopic lamellar molecules formed by a mixture of cholesterol, nonionic surfactants (alkyl or dialkyl polyglycerol ethers), and sometimes charge-inducing agents. These molecules comprise both hydrophilic and hydrophobic moieties of varying solubilities. In this review, several pathogenic microbes such as Staphylococcus aureus, Pseudomonas aeruginosa, Klebsiella pneumoniae, Plasmodium, Leishmania, and Candida spp. have been evaluated. Also, the development of a proper niosomal formulation for the required application was discussed. This review also reviews that an optimal formulation is dependent on several aspects, including the choice of nonionic surfactant, fabrication process, and fabrication parameters. Finally, this review will give information on the effectiveness of niosomes in treating acute microbial infections, the mechanism of action of niosomes in combating microbial pathogens, and the advantages of using niosomes over other treatment modalities.

Transesterification of phosphatidylcholine with DHA-rich algal oil using immobilized Candida antarctica lipase B to produce DHA-phosphatidylcholine

Docosahexaenoic acid (DHA) enriched with phospholipids (PLs) (DHA-PLs) is a type of structured PL with good physicochemical and nutritional properties. Compared to PLs and DHA, DHA-PLs has higher bioavailability and structural stability and many nutritional benefits. To improve the enzymatic synthesis of DHA-PLs, this study investigated the preparation of phosphatidylcholine (PC) enriched with DHA (DHA-PC) via enzymatic transesterification of algal oil, which is rich in DHA-triglycerides, using immobilized Candida antarctica lipase B (CALB). The optimized reaction system incorporated 31.2% DHA into the acyl chain of PC and converted 43.6% PC to DHA-PC within 72 h at 50 °C, 1:8 PC: algal oil mass ratio, 25% enzyme load (based on total substrate mass), and 0.02 g/mL molecular sieve concentration. Consequently, the side reactions of PC hydrolysis were effectively suppressed and products with high PC content (74.8%) were produced. Molecular structure analysis showed that exogenous DHA was specifically incorporated into the sn-1 site of the PC by immobilized CALB. Furthermore, the evaluation of reusability with eight cycles showed that the immobilized CALB had good operational stability in the present reaction system. Collectively, this study demonstrated the applicability of immobilized CALB as a biocatalyst for synthesizing DHA-PC and provided an improved enzyme-catalyzed method for future DHA-PL synthesis.

Non-aqueous formulations in topical ocular drug delivery - a paradigm shift?

Topical eyedrop application is the preferred route for drug delivery to anterior segment tissues; however, the challenge of overcoming the eye's anatomical and physiological barriers while minimising tissue toxicity has restricted developments in this field. Aqueous vehicles have traditionally been used, which typically require several additives and preservatives to achieve physiologically compatible and sterile eyedrops, elevating their toxicity potential. Non-aqueous vehicles have been suggested as efficient alternatives for topical drug delivery as they can address many of the limitations associated with conventional aqueous eyedrops. However, despite their obvious advantages, non-aqueous eyedrops remain poorly researched and few non-aqueous formulations are currently available in the market. This review challenges the conventional hypothesis that aqueous solubility is a prerequisite to ocular drug absorption and establishes a rationale for using non-aqueous vehicles for ocular drug delivery. Recent advances in the field have been detailed and future research prospects have been explored, pointing towards a paradigm shift in eyedrop formulation in the near future.

Beyond Sol-Gel: Molecular Gels with Different Transitions

The existence of sol–gel transitions is one of the most manifest properties of molecular gels. These transitions reflect their nature since they correspond to the association or dissociation of low weight molecules through non-covalent interactions to form the network constitutive of the gel. Most described molecular gels undergo only one gel-to-sol transition upon heating, and the reverse sol-to-gel transition upon cooling. It has been long observed that different conditions of formation could lead to gels with different morphologies, and that gels can undergo a transition from gel to crystals. However, more recent publications report molecular gels which exhibit additional transitions, for instance gel-to-gel transitions. This review surveys the molecular gels for which, in addition to sol–gel transitions, transitions of different nature have been reported: gel-to-gel transitions, gel-to-crystal transition, liquid–liquid phase separations, eutectic transformations, and synereses.

Topical liposomal amphotericin B gel treatment for cutaneous leishmaniasis caused by Leishmania major: a double-blind, randomized, placebo-controlled, pilot study

BACKGROUND

Cutaneous leishmaniasis (CL) topical treatments may have low efficacy, while systemic treatments have adverse effects (AEs) and high cost. Since treatment options for CL nowadays have numerous disadvantages, an alternative topical treatment is vastly needed. We assessed liposomal amphotericin B gel (LAmB gel) treatment efficacy and safety.

METHODS

A randomized, double-blind, placebo-controlled trial. Adults with CL (PCR proven, ≤5 lesions) were randomized for 28 days with LAmB gel (cases) versus placebo gel (controls), followed by LAmB gel for 28 days (both groups). Lesion size, ulceration, induration, scarring, swelling, and AEs (pain, itch, erythema, discharge, fever, and urticaria) were assessed at days 1, 28, and 56. PCR was repeated at day 56.

RESULTS

Thirteen patients (four cases, nine controls) with 39 lesions (11 cases, 28 controls) caused by Leishmania major (L. major) were randomized. Ulcer, induration, scarring, and swelling were noted in 18%, 91%, 0%, and 27% of cases, respectively, versus 86%, 89%, 7%, and 54% of controls, respectively. At day 28, improvement rates were low in both groups. Induration improved comparing LAmB gel treatment for 56 days versus 28 days. Ulceration, induration, and swelling improved comparing all patients at 56 days versus 28 days. PCR turned negative in three of four cases and eight of nine controls. Mild, only local, AEs were reported in <30% of the patients.

CONCLUSIONS

LAmB gel is safe and may be considered as an alternative topical treatment for CL caused by L. major. Further, larger-scale studies are warranted to evaluate the long-term impact of LAmB gel on the management of CL.

Tailoring the multi-functional properties of phospholipids for simple to complex self-assemblies

The unique interfacial properties, huge diversity, and biocompatible nature of phospholipids make them an attractive pharmaceutical excipient. The amphiphilic nature of these molecules offers them the property to self-assemble into distinct structures. The solubility, chemical and structural properties, surface charge, and critical packing parameters of phospholipids play an essential role during formulation design. This review focuses on the relationship between the structural features of a phospholipid molecule and the formation of different lipid-based nanocarrier drug delivery systems. This provides a rationale and guideline for the selection of appropriate phospholipids while designing a drug delivery system. Finally, we refer to relevant recent case studies covering different types of phospholipid-based systems including simple to complex assemblies. Different carriers in the size range of 50 nm to a few microns can be prepared using phospholipids. The carriers can be delivered through oral, intravenous, nasal, dermal, transmucosal, and subcutaneous routes. A wide range of applicability can be achieved by incorporating various hydrophilic and lipophilic additives in the phospholipid bilayer. Advanced research has led to the discovery of phospholipid complexes and cell membrane mimicking lipids. Overall, phospholipids remain a versatile pharmaceutical excipient for drug delivery. They play multiple roles as solubilizer, emulsifier, surfactant, permeation enhancer, coating agent, release modifier, and liposome former.

Synergistic effects of oleogelators in tailoring the properties of oleogels: A review

Conventional solid fats play a crucial role as an ingredient in many processed foods. However, these fats contain a high amount of saturated fats and trans fats. Legislations and dietary recommendations related to these two types of fats set forth as a consequence of evidence showing their deleterious health impact have triggered the attempts to find alternate tailor-made lipids for these solid fats. Oleogels is considered as a novel alternative, which has reduced saturated fat and no trans fat content. In addition to mimicking the distinctive characteristics of solid fats, oleogels can be developed to contain a high amount of polyunsaturated fatty acids and used to deliver bioactives. Although there has been a dramatic rise in the interest in developing oleogels for food applications over the past decade, none of them has been commercially used in foods so far due to the deficiency in their crystal network structure, particularly in monocomponent gels. Very recently, there is a surge in the interest in using of combination of gelators due to the synergistic effects that aid in overcoming the drawbacks in monocomponent gels. However, currently, there is no comprehensive insight into synergism among oleogelators reported in recent studies. Therefore, a comprehensive intuition into the findings reported on synergism is crucial to fill this gap. The objective of this review is to give a comprehensive insight into synergism among gelators based on recent literature. This paper also identifies the future research propositions towards developing oleogels capable of exactly mimicking the properties of conventional solid fats to bridge the gap between laboratory research and the food industry.

A Review of Potential Use of Amazonian Oils in the Synthesis of Organogels for Cosmetic Application

New strategies for the delivery of bioactives in the deeper layers of the skin have been studied in recent years, using mainly natural ingredients. Among the strategies are organogels as a promising tool to load bioactives with different physicochemical characteristics, using vegetable oils. Studies have shown satisfactory skin permeation, good physicochemical stability mainly due to its three-dimensional structure, and controlled release using vegetable oils and low-molecular-weight organogelators. Within the universe of natural ingredients, vegetable oils, especially those from the Amazon, have a series of benefits and characteristics that make them unique compared to conventional oils. Several studies have shown that the use of Amazonian oils brings a series of benefits to the skin, among which are an emollient, moisturizing, and nourishing effect. This work shows a compilation of the main Amazonian oils and their nutraceutical and physicochemical characteristics together with the minority polar components, related to health benefits, and their possible effects on the synthesis of organogels for cosmetic purposes.

Monoketonic Curcuminoid-Lidocaine Co-Deliver Using Thermosensitive Organogels: From Drug Synthesis to Epidermis Structural Studies

Organogels (ORGs) are remarkable matrices due to their versatile chemical composition and straightforward preparation. This study proposes the development of ORGs as dual drug-carrier systems, considering the application of synthetic monoketonic curcuminoid (m-CUR) and lidocaine (LDC) to treat topical inflammatory lesions. The monoketone curcuminoid (m-CUR) was synthesized by using an innovative method via a NbCl₅–acid catalysis. ORGs were prepared by associating an aqueous phase composed of Pluronic F127 and LDC hydrochloride with an organic phase comprising isopropyl myristate (IPM), soy lecithin (LEC), and the synthesized m-CUR. Physicochemical characterization was performed to evaluate the influence of the organic phase on the ORGs supramolecular organization, permeation profiles, cytotoxicity, and epidermis structural characteristics. The physico-chemical properties of the ORGs were shown to be strongly dependent on the oil phase constitution. Results revealed that the incorporation of LEC and m-CUR shifted the sol-gel transition temperature, and that the addition of LDC enhanced the rheological G′/G″ ratio to higher values compared to original ORGs. Consequently, highly structured gels lead to gradual and controlled LDC permeation profiles from the ORG formulations. Porcine ear skin epidermis was treated with ORGs and evaluated by infrared spectroscopy (FTIR), where the stratum corneum lipids were shown to transition from a hexagonal to a liquid crystal phase. Quantitative optical coherence tomography (OCT) analysis revealed that LEC and m-CUR additives modify skin structuring. Data from this study pointed ORGs as promising formulations for skin-delivery.

Natural Polyphenol-Containing Gels against HSV-1 Infection: A Comparative Study

Herpes simplex virus type 1 infection commonly affects many people, causing perioral sores, as well as severe complications including encephalitis in immunocompromised patients. The main pharmacological approach involves synthetic antiviral drugs, among which acyclovir is the golden standard, often leading to resistant virus strains under long-term use. An alternative approach based on antiviral plant-derived compounds, such as quercetin and mangiferin, demonstrated an antiviral potential. In the present study, semisolid forms for cutaneous application of quercetin and mangiferin were designed and evaluated to treat HSV-1 infection. Phosphatidylcholine- and poloxamer-based gels were produced and characterized. Gel physical–chemical aspects were evaluated by rheological measurements and X-ray diffraction, evidencing the different thermoresponsive behaviors and supramolecular organizations of semisolid forms. Quercetin and mangiferin diffusion kinetics were compared in vitro by a Franz cell system, demonstrating the different gel efficacies to restrain the polyphenol diffusion. The capability of gels to control polyphenol antioxidant potential and stability was evaluated, indicating a higher stability and antioxidant activity in the case of quercetin loaded in poloxamer-based gel. Furthermore, a plaque reduction assay, conducted to compare the virucidal effect of quercetin and mangiferin loaded in gels against the HSV-1 KOS strain, demonstrated the suitability of poloxamer-based gel to prolong the polyphenol activity.

Effect of the Physicochemical Properties of Liquid Paraffin on the Phase State and Rheological Properties of Lecithin Reverse Wormlike Micelles

Lecithin reverse wormlike micelles (LRWs) have been studied recently for dermal application dosage use but the effects of the physicochemical properties of oils on the formation and rheological properties of LRWs have not been investigated. We studied the effect of oil on the formation of LRWs using 5 types of liquid paraffin (LP) with kinematic viscosities ranging from 4.00 to 88.0 mm²/s. Partial phase diagrams of lecithin/water/LP systems indicated that LPs with low molecular weights could form LRWs with only a small amount of water, but LPs with high molecular weights could not form LRWs, regardless of the water concentration. The solubility of lecithin in LPs was higher for low molecular weight LPs, thus possibly affecting the formation of LRWs. The zero-shear viscosity and relaxation time of LRWs initially increased with increasing water concentration, and then decreased. The water concentration providing the maximum value was dependent on the molecular weight of the LP, whereas the maximum amount and length of the LRWs were independent of the water concentration. Our results indicate that the molecular weight of LP affects the ease of formation and the viscoelasticity of LRWs.

Pluronic F127-tailored lecithin organogel of acyclovir: preclinical evidence of antiviral activity using BALB/c murine model of cutaneous HSV-1 infection

Herpes is a well-known contagious infection equally affecting both sexes. Among many antiviral drugs employed for its treatment, acyclovir (ACY) is the drug of choice. The currently available therapies of ACY suffer from limitations like poor oral bioavailability (10-15%) and high-dose requirement. The present scientific study aims to explore pluronic lecithin organogel (PLO) as a novel drug delivery platform for ACY to bring an improvement in its delivery through topical route. The properties of organogel like biocompatibility and amphiphilic nature which facilitates dissolution of various drugs of different solubility characteristics along with enhancing the permeation potential of active molecules make it a favorable drug delivery platform for the management of topical diseases. The developed PLO formulations were characterized for micromeritic characteristics, viz., zeta potential, percentage drug content, organogel morphology, skin permeation, retention, and stability studies. The selected topical formulation was further compared with the marketed one for its therapeutic efficacy by inducing cutaneous Herpes simplex virus type 1 infection followed by confirmation of viral load by immunofluorescence and PCR analyses. The developed formulation showed significant improvement over the marketed product as reflected in lesion scoring index and PCR analysis. Further, it proved better to the marketed formulation in t.i.d. treatment regimen in comparison to control. The improvement in overall performance leading to enhanced bioavailability and safety is attributed to the synergism between excipient properties and formulation characteristics. The drug ACY in this micro environment not only finds an improved delivery vehicle but it also offers enhanced drug-target interactions.

Dual l-Carnosine/Aloe vera Nanophytosomes with Synergistically Enhanced Protective Effects against Methylglyoxal-Induced Angiogenesis Impairment

Microvascular complications are among the major outcomes of patients with type II diabetes mellitus, which are the consequences of impaired physiological functioning of small blood vessels and angiogenic responses in these patients. Overproduction and accumulation of methylglyoxal (MGO), a highly reactive dicarbonyl byproduct of glycolysis pathway, has been acclaimed as the main inducer of impaired angiogenic responses and microvascular dysfunction in diabetic patients with uncontrolled hyperglycemia. Hence, an effective approach to overcome diabetes-associated microvascular complications is to neutralize the deleterious activity of enhanced the concentration of MGO in the body. Owing to the glycation inhibitory activity of Aloe vera whole extract, and capability of l-carnosine, an endogenous dipeptide, in attenuating MGO's destructive activity, we examined whether application of a combination of l-carnosine and A. vera could be an effective way of synergistically weakening this reactive dicarbonyl's impaired angiogenic effects. Additionally, overcoming the poor cellular uptake and internalization of l-carnosine and A. vera, a nanophytosomal formulation of the physical mixture of two compounds was also established. Although l-carnosine and A. vera at whole studied combination ratios could synergistically enhance viability of human umbilical vein endothelial cells (HUVECs) treated with MGO, the 25:1 w/w ratio was the most effective one among the others (27 ± 0.5% compared to 12 ± 0.3 to 18 ± 0.4%; F (4, 15) = 183.9, P < 0.0001). Developing dual nanophytosomes of l-carnosine/A. vera (25:1) combination ratio, we demonstrated superiority of the nanophytosomal formulation in protecting HUVECs against MGO-induced toxicity following a 24-72 h incubation period (17.3, 15.8, and 12.4% respectively). Moreover, 500 μg/mL concentration of dual l-carnosine/A. vera nanophytosomes exhibited a superior free radical scavenging potency (63 ± 4 RFU vs 83 ± 5 RFU; F (5, 12) = 54.81, P < 0.0001) and nitric oxide synthesizing capacity (26.11 ± 0.19 vs 5.1 ± 0.33; F (5, 12) = 2537, P < 0.0001) compared to their physical combination counterpart. Similarly, 500 μg/mL dual l-carnosine/A. vera nanophytosome-treated HUVECs demonstrated a superior tube formation capacity (15 ± 3 vs 2 ± 0.3; F (5, 12) = 30.87, P < 0.001), wound scratch healing capability (4.92 ± 0.3 vs 3.07 ± 0.3 mm/h; F (5, 12) = 39.21, P < 0.0001), and transwell migration (586 ± 32 vs 394 ± 18; F (5, 12) = 231.8, P < 0.001) and invasion (172 ± 9 vs 115 ± 5; F (5, 12) = 581.1, P < 0.0001) activities compared to the physical combination treated ones. Further confirming the proangiogenic activity of the dual l-carnosine/A. vera nanophytosomes, a significant shift toward expression of proangiogenic genes including HIF-1α, VEGFA, bFGF, KDR, and Ang II was reported in treated HUVECs. Overall, dual l-carnosine/A. vera nanophytosomes could be a potential candidate for attenuating type II DM-associated microvascular complications with an impaired angiogenesis background.

Oleogel-Based Systems for the Delivery of Bioactive Compounds in Foods

Oleogels are semi-solid materials containing a large fraction of liquid oil entrapped in a network of structuring molecules. In the food industry, these formulations can be used to mimic fats and to deliver bioactive compounds. In the last decade, there has been increasing interest in these structures, not only from a scientific point of view, i.e., studying new molecules, methodologies for gelification, and new structures, but also from a technological point of view, with researchers and companies exploring these structures as a way to overcome certain challenges and/or create new and innovative products. One of the exciting applications of oleogels is the delivery of functional molecules, where the incorporation of oil-soluble functional compounds can be explored not only at the macroscale but also at micro- and nanoscales, resulting in different release behaviors and also different applications. This review presents and discusses the most recent works on the development, production, characterization, and applications of oleogels and other oleogel-based systems to deliver functional molecules in foods.

A new phytocosmetic preparation from Thymus vulgaris stimulates adipogenesis and controls skin aging process: In vitro studies and topical effects in a double-blind placebo-controlled clinical trial

BACKGROUND

The use of the injectable products for soft tissue augmentation and treatment of skin aging is an uncomfortable, invasive and related to several complications, and chronic reactions, mainly after long-term application. Efforts to develop new topically active anti-aging products with fewer adverse effects are a huge challenge that should be faced.

AIMS

We evaluated the anti-aging effects of a phytocosmetic preparation containing Thymus vulgaris associated with lecithin (ThymLec) on the facial wrinkles, expression lines, and face oval remodeling using a double-blind placebo-controlled clinical trial and in vitro cell culture assays.

METHODS

A clinical trial was conducted to evaluate the effects of ThymLec 2% on the area, length, and depth of the perioral and crow's feet wrinkles, nasolabial and smile lines, as well as face oval remodeling in female volunteers using a sophisticated Bio3D Structured-light Scanner. In the in vitro studies using 3T3-L1 mouse embryonic fibroblasts, adiponectin was measured by immunoenzymatic assay, adipogenesis by the AdipoRed reagent method, and the PPAR-γ expression by RT-PCR analysis.

RESULTS

Topical treatment with ThymLec 2% reduced facial wrinkles and expression lines promoting a face oval remodeling. In the in vitro studies, ThymLec upregulated the PPAR-γ expression increasing adiponectin production and stimulating the adipogenesis process.

CONCLUSIONS

The phytocosmetic preparation containing Thymus vulgaris and lecithin is an innovative and safe topical anti-aging product promoting fat tissue augmentation by adipogenesis stimulation via the upregulation of PPAR-γ expression and adiponectin production.

Polymeric Gels and Their Application in the Treatment of Psoriasis Vulgaris: A Review

Psoriasis is a chronic skin disease, and it is especially characterized by the occurrence of red, itchy, and scaly eruptions on the skin. The quality of life of patients with psoriasis is decreased because this disease remains incurable, despite the rapid progress of therapeutic methods and the introduction of many innovative antipsoriatic drugs. Moreover, many patients with psoriasis are dissatisfied with their current treatment methods and the form with which the drug is applied. The patients complain about skin irritation, clothing stains, unpleasant smell, or excessive viscosity of the preparation. The causes of these issues should be linked with little effectiveness of the therapy caused by low permeation of the drug into the skin, as well as patients’ disobeying doctors’ recommendations, e.g., concerning regular application of the preparation. Both of these factors are closely related to the physicochemical form of the preparation and its rheological and mechanical properties. To improve the quality of patients’ lives, it is important to gain knowledge about the specific form of the drug and its effect on the safety and efficacy of a therapy as well as the patients’ comfort during application. Therefore, we present a literature review and a detailed analysis of the composition, rheological properties, and mechanical properties of polymeric gels as an alternative to viscous and greasy ointments. We discuss the following polymeric gels: hydrogels, oleogels, emulgels, and bigels. In our opinion, they have many characteristics (i.e., safety, effectiveness, desired durability, acceptance by patients), which can contribute to the development of an effective and, at the same time comfortable, method of local treatment of psoriasis for patients.

Development and characterization of pluronic lecithin organogel containing fluocinolone acetonide

The rabble-rousing skin condition can be conventionally treated, but due to some demerits, there is a need to find a novel approach with an appropriate release profile. The research work narrates the optimization of the topical delivery system of Fluocinolone acetonide loaded in pluronic lecithin organogel. The preliminary studies were carried out and, the ternary phase diagram was established by Chemix school version 3.60. The formulation was optimized by taking a different concentration of polymers as independent and viscosity and drug release (6 h) as dependent variables by applying 3² full factorial design. The optimized batch was further compared with marketed preparation and also kept for the stability study. The release profile of the optimized batch exhibited a sustained release of up to 6 h (77.00%). It gave ex vivo drug release up to 6 h (90.64%) which is more prolonged than marketed preparation and, cutaneous disposition was found to be higher. Besides, the texture analysis was compared to that of the marketed formulation of the drug. However, the proof of the effectiveness of the formulated pluronic lecithin organogel will require further in vivo study for future aspects. In a nutshell, the proposed formulation of fluocinolone acetonide is the simplest and promising dosage form for the treatment of psoriasis.

Effect of high-intensity ultrasound on the oleogelation and physical properties of high melting point monoglycerides and triglycerides oleogels

Oleogels and oleogelation routes have been extensively studied in the past decade; however, the industry has not yet implemented this technique due to price, availability, and clean label. The objective of this study was to evaluate the synergism of binary oleogels structured by monoglycerides (MG) and high melting point triacylglycerols (HF) with and without high-intensity ultrasound (HIU) according to their physical properties. MG:HF (0:6, 1:5, 2:4, 3:3, 4:2, 5:1, and 6:0) oleogels were produced by mixing at 70 °C with a stirring of 350 rpm for 5 min, followed by a cooling and storage at 20 °C for 24 hr. A 20-kHz HIU was applied for 10s, 30s, or 10s using three pulses (10sON/10sOFF) during the cooling step via a macro tip (12.7 mm) and 50% amplitude (56 W) in the presence of few -crystals. Samples were evaluated according to their hardness, oil-binding capacity (OBC), microstructure, melting behavior, viscoelasticity, and flow behavior. The best physical properties were found in the MG6:HF0 oleogel, with a hardness of 1.2 N, elasticity of 5.5 kPa, viscosity of 99 Pa⋅s and 99% OBC. These properties were reduced with the decrease of MG in the blend. The sonication did not improve the MG6:HF0, instead it affected its properties negatively. However, sonication showed a positive effect on the blends of MG and HF. The hardness was improved at least threefold and OBC around 20%, these effects were already observed using only 10s sonication. Sonocrystallization induced secondary nucleation and changed the crystalline material only in blends containing HF indicating the better effect of the sonocrystallization on oleogels in the presence of high-melting points triacylglycerols. PRACTICAL APPLICATION: Oleogels are a valuable alternative in food industry to replace trans and reduce saturated fatty acids content in many food products. The combination of a binary structuration and use of high-intensity ultrasound that is a physical green technology will give the food industry information on how to improve the physical properties of oleogels without increasing the amount of oleogelators, giving a future alternative to clean label and sensory claims of oleogels applications.

Preparation of Protein Oleogels: Effect on Structure and Functionality

Among available structuring agents that have been used to provide solid properties to liquid oils, protein is a more recent candidate. Due to their nutritional value and high consumer acceptance, proteins are of special interest for the preparation of edible oleogels as an alternative for solid fats. Whereas the field of protein oleogelation is still rather new and just starts unfolding, several preparation methods have been demonstrated to be suitable for protein oleogel preparation. However, there is limited knowledge regarding the link between microstructural properties of the gels and macroscopic rheological properties, and the potential of such protein-based oleogels as a fat replacer in food products. In this review, we therefore provide an overview of various protein oleogel preparation methods and the resulting gel microstructures. Based on the different structures, we discuss how the rheological properties can be modified for the different types of protein oleogels. Finally, we consider the suitability of the different preparation methods regarding potential applications on industrial scale, and provide a short summary of the current state of knowledge regarding the behavior of protein oleogels as a fat replacer in food products.

Topical agents: a thoughtful choice for multimodal analgesia

For over a thousand years, various substances have been applied to the skin to treat pain. Some of these substances have active ingredients that we still use today. However, some have been discontinued due to their harmful effect, while others have been long forgotten. Recent concerns regarding the cardiovascular and renal risk from nonsteroidal anti-inflammatory drugs, and issues with opioids, have resulted in increasing demand and attention to non-systemic topical alternatives. There is increasing evidence of the efficacy and safety of topical agents in pain control. Topical analgesics are great alternatives for pain management and are an essential part of multimodal analgesia. This review aims to describe essential aspects of topical drugs that physicians should consider in their practice as part of multimodal analgesia. This review describes the mechanism of popular topical analgesics and also introduces the most recently released and experimental topical medications.

Mechanism for Transition of Reverse Cylindrical Micelles to Spherical Micelles Induced by Diverse Alcohols

Herein, the effects of various alcohols on lecithin/CaCl₂ organogels are investigated. Mixtures of lecithin and CaCl₂ form reverse cylindrical micelles, resulting in optically transparent organogels. The addition of various alcohols to a mixture of lecithin and CaCl₂ induces a decrease in viscosity through which reverse cylindrical micelles are transformed into spherical micelles (or short cylindrical micelles). Long-hydrocarbon-chain alcohols decrease the viscosity of lecithin/CaCl₂ mixtures more efficiently. Hydrogen bonding and hydrocarbon chain interactions between lecithin and alcohol play important roles in the morphological transition. More importantly, isothermal titration calorimetry was conducted to obtain thermodynamic variables such as the enthalpy, equilibrium constant, Gibbs free energy, entropy, and stoichiometry of the associated molecules observed in the transition. It was found that the transition is an entropically driven process, in which the endothermic and exothermic behaviors were observed depending on the hydrocarbon chain length in the alcohol. In addition, the enthalpy for the association of the alcohol with lecithin showed a linear relationship depending on the hydrocarbon chain length, in which the magnitude of hydrogen bonding and hydrocarbon chain interactions was obtained quantitatively. To the best of our knowledge, this is the first study reporting the thermodynamic properties of the morphological transition observed in a reverse self-assembly process.

Enhanced Percutaneous Delivery of Beta-Blockers Using Thermal Resurfacing Drug Delivery System for Topical Treatment of Infantile Hemangiomas

<b><i>Background:</i></b> Infantile hemangiomas (IHs) are the most common vascular tumors in children. In the past few years, topical beta-blockers (bBs) have been reported to be an effective treatment of superficial IHs. <b><i>Objective:</i></b> We sought to evaluate the clinical effectiveness and safety profile of enhanced percutaneous delivery of bBs for the treatment of IH. <b><i>Methods:</i></b> A retrospective study of all cases of IHs treated with enhanced percutaneous delivery of bBs between 2018 and 2019 was performed. Epidemiologic, clinical, and treatment data, including effectiveness score and safety, were reviewed. <b><i>Results:</i></b> The study included 11 patients with a total of 11 IHs. Of the total number of IHs, 7 (63.7%) showed a good response to treatment and 4 (36.3%) had a partial response; thus all patients (100%) had good or partial response to treatment. No systemic or local adverse effects were reported. <b><i>Limitations:</i></b> This is an uncontrolled retrospective study. <b><i>Conclusion:</i></b> Enhanced percutaneous delivery of bBs is a safe and efficient topical therapy for IH.

Microemulsion Based Gel of Sulconazole Nitrate for Topical Application

Objectives

Sulconazole is a broad spectrum antifungal agent of the imidazole class used against dermatophytes and other fungi to treat skin infections. The aim of the present work was to formulate and evaluate a microemulsion-based topical sulconazole gel.

Materials and Methods

Microemulsion formulation of sulconazole nitrate was prepared by using oil, surfactant, cosurfactant and water at different ratios. This was then subjected to clarity and particle size analysis, a centrifugation test, a dilution test, and freeze thawing.

Results

The zeta potential of formulation F1 was -41.3 and stable. The pH of the microemulsion formulation was within the range of pH of skin. F1 showed a higher percentage amount of drug as compared with the other formulations. The viscosity showed that F1 was optimum. The freezing and thawing results showed there was no phase separation and the formulation was stable. In vitro drug release showed that the drug release from the microemulsion of F1 was higher when compared to the other formulations. It revealed F1 had the highest drug content of 95.88±0.3% and % cumulative drug release was 88.75% release in 8 h. The in vivo skin irritation study on rats confirmed that formulation was nontoxic and nonirritant.

Conclusion

The present study confirmed the safety of the formulated sulconazole loaded microemulsion gel for topical application.

Phase Behavior of the Bilayers Containing Hydrogenated Soy Lecithin and β-Sitosteryl Sulfate

The phase behaviors of systems containing saturated phosphatidylcholine (PC) and plant steroids can be important for designing new alternative delivery methods. In our previous studies, we found that even a small amount of β-sitosteryl sulfate (PSO₄) significantly affects the phase behavior, hydration properties, and liposomal properties of pure saturated phosphatidylcholines [Kafle, A.; Colloids Surf., B 2018, 161, 59-66; Kafle, A.; J. Oleo Sci. 2018, 67 (12), 1511-1519]. In the current paper, we are reporting the phase behavior of a more complex system consisting of hydrogenated soy lecithin (HLC), which is useful as a carrier in drug delivery systems or in cosmetics, and PSO₄. HLC, which is composed of phosphatidylcholine (PC), phosphatidylethanolamine (PE), phosphatidic acid (PA), and lysophosphatidylcholine (LPC), demonstrated a versatile phase behavior. The PC component of HLC was found to separate from the PE and PA components as a result of nonideal mixing. At room temperature, these two domains represented two distinct gel phases denoted L_β1 and L_β2. The L_β1 phase selectively underwent transition into the liquid crystalline phase (L_α) at a lower temperature than L_β2. Upon addition of PSO₄, at room temperature, the PC fraction gradually converted into the liquid-ordered (L_o) phase, while the (PE + PA) fraction remained unaffected. When heated above 60 °C, the whole material converted into the liquid crystalline phase. The observed fluidizing effect of PSO₄ on HLC can find applications in preparing vehicles for moisture or drugs in cosmetic and pharmaceutical formulations.

Nanomedicines to Treat Skin Pathologies with Natural Molecules

The skin and mucous membranes are subjected to many disorders and pathological conditions. Nature offers a wide range of molecules with antioxidant activity able to neutralize, at least in part, the formation of free radicals and therefore to counteract the phenomena of cellular aging. Since synthetic drugs for the treatment of skin diseases can induce resistance, it is particularly interesting to use compounds of plant origin, transporting them in pharmaceutical forms capable of controlling their release and absorption. This review provides an overview of new findings about the use of lipid-based nanosystems for the delivery of natural molecules useful on the topical treatment of skin disorders. Several natural molecules encapsulated in lipid nanosystems have been considered in the treatment of some skin pathologies or diseases. Particularly, the use of rosemary and eucalyptus essential oil, saffron derivatives, curcumin, eugenol, capsaicin, thymol and lycopene has been reported. The molecules have been alternatively encapsulated in viscous systems, such as the organogels, or in liquid systems, such as ethosomes, transferosomes, solid lipid nanoparticles and monoolein based dispersions thickened by inclusion in carbomer gels. The nanostructured forms have been in vitro and in vivo investigated for the treatment of skin disorders due to dehydration, inflammation, melanoma, wound healing, fungal infections or psoriasis. The data reported in the different studies have suggested that the cutaneous application of lipid nanosystems allows a deep interaction between lipid matrix and skin strata, promoting a prolonged release and efficacy of the loaded natural molecules. This review suggests that the application of natural molecules onto the skin by lipid-based nanosystems can provide numerous clinician benefits in dermatology and cosmetics.

A novel flunarizine hydrochloride-loaded organogel for intraocular drug delivery in situ: Design, physicochemical characteristics and inspection

We developed a safe and efficacious drug delivery system for treatment of brain diseases. A novel in-situ gel system was prepared using soybean oil, stearic acid and N-methyl-2-pyrrolidinone (NMP) (10:1:3, v/w/v). This system had low viscosity as a sol in vitro and turned into a solid or semi-solid gel in situ after administration. The poorly water-soluble drug flunarizine hydrochloride (FNZ) was incorporated into this "organogel" system. Organogel-FNZ was characterized by light microscopy, differential scanning calorimetry (DSC) and rheology. Drug release in vitro was investigated. The initial "burst" effect did not occur in organogel-FNZ, which is different from other gels formed in situ. Pharmacokinetic studies were undertaken in rats using gel administration (14 mg kg^-1), intravenous administration (5 mg kg^-1) and administration using drops (14 mg kg^-1). Organogel-FNZ could reduce the clearance rate and prolong the duration of action, in the plasma and brain tissues of rats. The peak serum concentration, area under the curve and absolute bioavailability of the organogel-FNZ group were higher than those of the intraocular- drops group. Organogel-FNZ is a promising drug-delivery system for treatment of brain diseases by intraocular administration.

Gelling Lyotropic Liquid Crystals with the Organogelator 1,3:2,4-Dibenzylidene-d-sorbitol Part II: Microstructure

This study deals with the gelation of lyotropic liquid crystals (LLCs) of the binary system H₂O-heptaethylene glycol monododecyl ether (C₁₂E₇). The L_α and H₁ phases are gelled with the organogelator 1,3:2,4-dibenzylidene-d-sorbitol (DBS). The microstructure of the gelled LLCs is compared to those of the binary counterparts, i.e., the pure LLCs and the binary gel ethylene glycol-DBS. We present the first examples of gelled lyotropic liquid crystals (LLCs) formed by two different ways upon cooling: (1) At a DBS mass fraction of η = 0.015, the gel is formed first, followed by LLC formation. (2) At η = 0.0075, the LLC is formed first, followed by gel formation. Addressing LLC and gel formation in different orders, the influence of the LLC on the gel network and vice versa can be examined. Independent of which structure is formed first, the interlayer spacing d_LLC of the LLCs is only slightly larger in the presence of the gel network compared to the nongelled counterparts. Likewise, the influence of the LLCs on the gel fibers is independent of the chronology of the gel and LLC formation. For both ways, the gel fibers are twisted and arranged in bundles parallel to the bilayers of the L_α phase and the cylindrical micelles of the H₁ phase. Whereas the twisted structure of the gel fibers in ethylene glycol is retained in the presence of the LLCs, the arrangement in bundles is not observed in the binary gels. In the latter case, randomly distributed single fibers which are also slightly thinner are detected. However, we observed the fiber bundles independent of whether the gel network is formed in the isotropic phase or in the LLC and argue that the difference is caused by different interactions of organogelator DBS with the system H₂O-C₁₂E₇ than with ethylene glycol. In summary, we found that both the surfactant and the gelator molecules self-assemble in the presence of each other, leading to the coexistence of an LLC and a gel network. This is what is called orthogonal self-assembly.

Expert design and desirability function approach for the development of diazepam thermally sensitive rectal gel

Aim: The aim of the present work was to develop an in situ thermosensitive rectal gel for diazepam by using Expert-design for improving three factors and a three-level process was formed by using a cold method. Methods & materials: Response surface design was utilized to investigate the effect of independent variables like sodium chloride (NaCl, X1), poloxamer 407 (F-127, X2) and diazepam (X3), on different dependent variables such as gelation temperature, mucoadhesive strength, drug content, along with permeation and stability. Results: The obtained results revealed that the addition of diazepam enhanced the gelation temperature of hydrogel while it decreased the gel strength and mucoadhesive force. Conclusion: It is suggested that in situ hydrogels may be suitable candidates for rectal delivery.