Vaginal drug delivery systems for HIV prevention

Recent Advances in Studying In Vitro Drug Permeation Across Mucosal Membranes

Transmucosal drug products, such as aerosols, films, semisolids, suppositories, and tablets, have been developed for the treatment of various human diseases and conditions. Transmucosal drug absorption is highly influenced by the biological structures of the mucosa and the physiological environment specific to the administration route (e.g., nasal, rectal, and vaginal). Over the last few decades, in vitro permeation testing (IVPT) using animal tissues or in vitro cell cultures have been utilized as a cost-effective and efficient tool for evaluating drug release and permeation behavior, assisting in formulation development and quality control of transmucosal drug delivery systems. This review summarizes the key mucosal permeation barriers associated with representative transmucosal administration routes, as well as considerations for IVPT method development. It highlights various IVPT methods, including vertical diffusion cell, flow-through diffusion cell, Ussing chamber, and transwell systems. Additionally, future perspectives are discussed, such as the use of optical methods to study in vitro drug permeation and the development of in vitro-in vivo correlation (IVIVC) for transmucosal drug development. The potential of IVPT as part of in vitro bioequivalence assessment strategies for locally acting transmucosal drug products is also highlighted.

Nanomedicine for Maternal and Fetal Health

Conception, pregnancy, and childbirth are complex processes that affect both mother and fetus. Thus, it is perhaps not surprising that in the United States alone, roughly 11% of women struggle with infertility and 16% of pregnancies involve some sort of complication. This presents a clear need to develop safe and effective treatment options, though the development of therapeutics for use in women's health and particularly in pregnancy is relatively limited. Physiological and biological changes during the menstrual cycle and pregnancy impact biodistribution, pharmacokinetics, and efficacy, further complicating the process of administration and delivery of therapeutics. In addition to the complex pharmacodynamics, there is also the challenge of overcoming physiological barriers that impact various routes of local and systemic administration, including the blood-follicle barrier and the placenta. Nanomedicine presents a unique opportunity to target and sustain drug delivery to the reproductive tract and other relevant organs in the mother and fetus, as well as improve the safety profile and minimize side effects. Nanomedicine-based approaches have the potential to improve the management and treatment of infertility, obstetric complications, and fetal conditions.

Pharmacogenomics of drug transporters for antiretroviral long-acting pre-exposure prophylaxis for HIV

The use of antiretrovirals (ARVs) as oral, topical, or long-acting pre-exposure prophylaxis (PrEP) has emerged as a promising strategy for HIV prevention. Clinical trials testing Truvada® [tenofovir disoproxil fumarate (TDF)/tenofovir (TFV) and emtricitabine (FTC)] as oral or topical PrEP in African women showed mixed results in preventing HIV infections. Since oral and topical PrEP effectiveness is dependent on adequate drug delivery and availability to sites of HIV infection such as the blood and female genital tract (FGT); host biological factors such as drug transporters have been implicated as key regulators of PrEP. Drug transporter expression levels and function have been identified as critical determinants of PrEP efficacy by regulating PrEP pharmacokinetics across various cells and tissues of the blood, renal tissues, FGT mucosal tissues and other immune cells targeted by HIV. In addition, biological factors such as genetic polymorphisms and genital inflammation also influence drug transporter expression levels and functionality. In this review, drug transporters and biological factors modulating drug transporter disposition are used to explain discrepancies observed in PrEP clinical trials. This review also provides insight at a pharmacological level of how these factors further increase the susceptibility of the FGT to HIV infections, subsequently contributing to ineffective PrEP interventions in African women.

Development and Evaluation of Nanoparticles-in-Film Technology to Achieve Extended In Vivo Exposure of MK-2048 for HIV Prevention

MK-2048 is a second-generation integrase inhibitor active against HIV, which has been applied vaginally using ring formulations. In this work, a nanoparticle-in-film technology was developed as a discrete pre-exposure prophylactic product option against HIV for an extended duration of use. A film platform loaded with poly (lactic-co-glycolic acid) nanoparticles (PNP) encapsulating MK-2048 was engineered. MK-2048 PNPs were loaded into films that were manufactured via the solvent casting method. Physicochemical and mechanical properties, in vitro efficacy, Lactobacillus compatibility, in vitro and ex vivo permeability, and in vivo pharmacokinetics in macaques were evaluated. PNPs with a mean diameter of 382.2 nm and −15.2 mV zeta potential were obtained with 95.2% drug encapsulation efficiency. PNP films showed comparable in vitro efficacy to free MK-2048 (IC50 0.46 vs. 0.54 nM) and were found to have no impact on Lactobacillus. MK-2048 encapsulated in PNPs showed an increase in permeability (>4-fold) compared to the free MK-2048 in MDCKII cell lines. Furthermore, PNPs had higher ectocervical tissue permeability (1.7-fold) compared to free MK-2048. PNP films showed sustained drug levels for at least 3 weeks in the macaque vaginal fluid. This work demonstrates the synergy of integrating nanomedicine and polymeric film technology to achieve sustained vaginal drug delivery.

Women's preferences and acceptance for different drug delivery routes and products

To use or not to use, that is the first decision to take regarding a drug product. This mandatory step for adherence dictates product efficacy. The determinants for such decision do not only rely on the priority of the therapeutic or preventive strategy, but are related to a complex network of perceptions, preferences, personal and cultural backgrounds, and results from previous experiences. Women's preferences for dosage forms and even for drug delivery routes have been mainly studied in the fields of contraception and HIV prevention (and their related multipurpose approaches). Much less attention has been devoted to other therapeutic or preventive strategies. In a time when patient-centred approaches and shared decisions are increasingly valued, considering women's preferences and their main determinants is essential for product development and selection. Such products will be more likely to be chosen and used as intended, increasing efficacy, and reducing the overall costs related with these treatments. This knowledge shall be integrated in early stages of product development. This article reviews the state of the art related with women's preferences and acceptance for different dosage forms and drug delivery routes involved in women's health. The methodologies used for collecting these data and their major drawbacks are discussed. Results obtained from acceptability studies and the main determinants for selection of preventive and treatment drug products are discussed as tools for new developments in the field.

Recent Advances in the Excipients Used in Modified Release Vaginal Formulations

The formulation of an ideal vaginal drug delivery system (DDS), with the requisite properties, with respect to safety, efficacy, patient compliance, aesthetics, harmonization with the regulatory requirements, and cost, requires a meticulous selection of the active ingredients and the excipients used. Novel excipients defined by diversity and multifunctionality are used in order to ameliorate drug delivery attributes. Synthetic and natural polymers are broadly used in pharmaceutical vaginal formulations (solid, semi-solid dosage forms, implantable devices, and nanomedicines) with a promising perspective in improving stability and compatibility issues when administered topically or systemically. Moreover, the use of biopolymers is aiming towards formulating novel bioactive, biocompatible, and biodegradable DDSs with a controllable drug release rate. Overviewing vaginal microenvironment, which is described by variable and perplexed features, a perceptive choice of excipients is essential. This review summarizes the recent advances on the excipients used in modified vaginal drug delivery formulations, in an attempt to aid the formulation scientist in selecting the optimal excipients for the preparation of vaginal products.

Nanomedicines for the topical treatment of vulvovaginal infections: Addressing the challenges of antimicrobial resistance

Recent years have, surprisingly, witnessed an increase in incidence of sexually transmitted infections (STIs). At the same time, antimicrobial therapy came under the threat of ever rising antimicrobial resistance (AMR), resulting in STIs with extremely limited therapy options. In this review, we addressed the challenges of treating vaginal infections in an era of AMR. We focused on published work regarding nanomedicine destined for localized treatment of vaginal infections. Localized therapy offers numerous advantages such as assuring high drug concentration at the infection site, limiting systemic drug exposure that can lead to faster development of AMR reduction in the systemic side effects and potentially safe therapy in pregnancy. We provided a state-of-the-art overview of nanoformulations proposed to topically treat STIs, emphasizing the challenges and advantages of each type of nanocarriers, as well as issues of potential toxicity.

Probiotic lactobacilli in formulas and hygiene products for the health of the urogenital tract

Lactobacilli are the predominant microorganisms of the healthy human vagina. A novel alternative for the prevention and treatment of female urogenital tract infections (UGTI) is the inclusion of these microorganisms as active pharmaceutical ingredients in probiotic formulas, and more recently in female hygienic products. Probiotics are defined as “live microorganisms that, when administered in adequate amounts, confer a health benefit on the host.” A list of requirements must be considered during the development of probiotic product/formula for the female urogenital tract (UGT). This review aims to resume the requirements, probiotic characteristics, and clinical trial applied to determine the effect of probiotic and potentially probiotic strains on different woman’s physiological and pathological conditions, and in preterm birth prevention. A revision of female hygienic products available in the world market is included, together with novel studies applying nanotechnology for Lactobacillus incorporation in hygienic products. Further studies and well‐designed clinical trials are urgently required to complement the current knowledge and applications of probiotics in the female UGT. The use of probiotic formulas and products will improve and restore the ecological equilibrium of the UGT microbiome to prevent and treat UGTI in women under different conditions.

Emulsion-Based Multicompartment Vaginal Drug Carriers: From Nanoemulsions to Nanoemulgels

In order to overcome the limitations associated with vaginal administration of drugs, e.g., the short contact time of the drug form with the mucosa or continuous carrier wash-out, the development of new carriers for gynecological use is necessary. Furthermore, high individual anatomical and physiological variability resulting in unsatisfactory therapeutic efficacy of lipophilic active substances requires application of multicompartment drug delivery systems. This manuscript provides an up-to-date comprehensive review of the literature on emulsion-based vaginal dosage forms (EVDF) including macroemulsions, microemulsions, nanoemulsions, multiple emulsions and self-emulsifying drug delivery systems. The first part of the paper discusses (i) the influence of anatomical-physiological conditions on therapeutic efficacy of drug forms after local and systemic administration, (ii) characterization of EVDF components and the manufacturing techniques of these dosage forms and (iii) methods used to evaluate the physicochemical and pharmaceutical properties of emulsion-based vaginal dosage forms. The second part of the paper presents (iv) the results of biological and in vivo studies as well as (v) clinical evaluation of EVDF safety and therapeutic efficacy across different indications.

Recent Advances in Polymer-Based Vaginal Drug Delivery Systems

The vagina has been considered a potential drug administration route for centuries. Most of the currently marketed and investigated vaginal formulations are composed with the use of natural or synthetic polymers having different functions in the product. The vaginal route is usually investigated as an administration site for topically acting active ingredients; however, the anatomical and physiological features of the vagina make it suitable also for drug systemic absorption. In this review, the most important natural and synthetic polymers used in vaginal products are summarized and described, with special attention paid to the properties important in terms of vaginal application. Moreover, the current knowledge on the commonly applied and innovative dosage forms designed for vaginal administration was presented. The aim of this work was to highlight the most recent research directions and indicate challenges related to vaginal drug administrations. As revealed in the literature overview, intravaginal products still gain enormous scientific attention, and novel polymers and formulations are still explored. However, there are research areas that require more extensive studies in order to provide the safety of novel vaginal products.

Highlights in poloxamer-based drug delivery systems as strategy at local application for vaginal infections

Infectious diseases related to the vagina include diseases caused by the imbalance of the vaginal flora and by sexually transmitted infections. Some of these present themselves as a public health problem due to the lack of efficient treatment that leads to their complete cure, and others due to the growing resistance to drugs used in therapy. In this sense, new treatment strategies are desirable, with vaginal administration rout being a great choice since can bypass first-pass metabolism and decrease drug interactions and adverse effects. However, it is worth highlighting limitations related to patient's discomfort at application time. Thereby, the use of poloxamer-based drug delivery systems is desirable due its stimuli-sensitive characteristic. Therefore, the present review reports a brief overview of poloxamer properties, biological behavior and advances in poloxamer applications in controlled drug release systems for infectious diseases related to the vagina treatment and prevention.

In vitro Study on Synergistic Interactions Between Free and Encapsulated Q-Griffithsin and Antiretrovirals Against HIV-1 Infection

Introduction

Human immunodeficiency virus (HIV) remains a persistent global challenge, impacting 38 million people worldwide. Antiretrovirals (ARVs) including tenofovir (TFV), raltegravir (RAL), and dapivirine (DAP) have been developed to prevent and treat HIV-1 via different mechanisms of action. In parallel, a promising biological candidate, griffithsin (GRFT), has demonstrated outstanding preclinical safety and potency against HIV-1. While ARV co-administration has been shown to enhance virus inhibition, synergistic interactions between ARVs and the oxidation-resistant variant of GRFT (Q-GRFT) have not yet been explored. Here, we co-administered Q-GRFT with TFV, RAL, and DAP, in free and encapsulated forms, to identify unique protein-drug synergies.

Methods

Nanoparticles (NPs) were synthesized using a single or double-emulsion technique and release from each formulation was assessed in simulated vaginal fluid. Next, each ARV, in free and encapsulated forms, was co-administered with Q-GRFT or Q-GRFT NPs to evaluate the impact of co-administration in HIV-1 pseudovirus assays, and the combination indices were calculated to identify synergistic interactions. Using the most synergistic formulations, we investigated the effect of agent incorporation in NP-fiber composites on release properties. Finally, NP safety was assessed in vitro using MTT assay.

Results

All active agents were encapsulated in NPs with desirable encapsulation efficiency (15–100%), providing ~20% release over 2 weeks. The co-administration of free Q-GRFT with each free ARV resulted in strong synergistic interactions, relative to each agent alone. Similarly, Q-GRFT NP and ARV NP co-administration resulted in synergy across all formulations, with the most potent interactions between encapsulated Q-GRFT and DAP. Furthermore, the incorporation of Q-GRFT and DAP in NP-fiber composites resulted in burst release of DAP and Q-GRFT with a second phase of Q-GRFT release. Finally, all NP formulations exhibited safety in vitro.

Conclusions

This work suggests that Q-GRFT and ARV co-administration in free or encapsulated forms may improve efficacy in achieving prophylaxis.

Influence of Plasticizers on the pH-Dependent Drug Release and Cellular Interactions of Hydroxypropyl Methylcellulose/Zein Vaginal Anti-HIV Films Containing Tenofovir

Vaginal films featuring the pH-dependent release of tenofovir (TFV) were developed for the prevention of sexual transmission of human immunodeficiency syndrome (HIV). Films based on hydroxypropyl methylcellulose and zein were prepared incorporating different plasticizers [oleic acid, lactic acid, glycerol, and polyethylene glycol 400 (PEG)] and evaluated for in vitro drug release in an acidic simulated vaginal fluid (pH 4.2) and a slightly alkaline mixture of simulated seminal and vaginal fluids (pH 7.5). Results revealed that optimal biphasic TFV release was possible with proper combination of plasticizers (PEG and oleic acid, 1:7 w/w) and by adjusting the plasticizer/matrix-forming material ratio. The films had similar or higher levels of TFV associated with genital epithelial cells (Ca Ski or HEC-1-A cells) but lower drug permeability compared to the free drug. These data confirm that films have the potential to achieve suitable mucosal levels of TFV with low systemic exposure. The films developed could protect women from HIV sexual transmission.

The Role of Volume in the Perceptibility of Topical Vaginal Formulations: User Sensory Perceptions and Experiences of Heterosexual Couples During Vaginal Sex

Users' sensory perceptions and experiences (USPEs; perceptibility) of drug formulations can critically impact product adoption and adherence, especially when products rely on appropriate user behaviors (timing of administration, dosing measurement) for effectiveness. The use of topical gel formulations for effective antihuman immunodeficiency virus/sexually transmitted infection (HIV/STI) vaginal microbicides has been associated with messiness and other use-associated challenges, resulting in low adherence. Nonetheless, such formulations remain attractive due to good pharmacokinetics and resulting pharmacodynamics through their volume and surface contact for drug delivery into luminal fluids and mucosa. Consequently, advocates and scientists continue to pursue topical forms [semisolid (e.g., gel, suppository); solid (e.g., film)] to deliver select drugs and offer user choice in HIV/STI prevention. The current data build on previously validated USPE scales evaluating perceptibility of gels with various biophysical/rheological properties. Specifically, increased formulation parameter space adds a new set of properties inherent in quick-dissolving film. We compared film, a product adding no discernable volume to the vaginal environment, to 2 and 3.5 mL hydroxyethyl cellulose gel to consider the impact of volume on user experience. We also examined the USPE scales for evaluation of male sexual partners' experiences. The original USPE scales functioned as expected. Additionally, six new USPE scales were identified in this enhanced parameter space. Significant differences were noted between USPEs in pairwise comparisons, with largest differences between film and high-volume gel. Product developers and behavioral scientists can use these scales to design products, optimizing user experience and maximizing adherence and delivery of efficacious anti-HIV/STI pharmaceuticals. They can be extended to evaluation of additional formulations, devices, and compartments, as well as single- and multipurpose pharmaceuticals. In broader contexts, USPEs could be of value in evaluating formulations and devices to prevent/treat other diseases (e.g., ophthalmologic, dermatologic). Steadfast attention should be given to patient experience, and, where applicable, experiences of partners and/or caregivers.

Perspectives from Young South African and Zimbabwean Women on Attributes of Four (Placebo) Vaginal Microbicide Delivery Forms

Introduction

Incorporating end-user input into the design of new vaginal microbicides for women is key to optimizing their uptake, consistent use, and, ultimately, success in combatting the heterosexual HIV epidemic.

Methods

The Quatro Study assessed four placebo forms of vaginally inserted HIV-microbicides among young microbicide-naïve African women: on-demand film, insert and gel, and monthly ring. Participants randomly used each product for 1 month and provided product satisfaction ratings (1–5 scale), and opinions on product attributes and potential alternative designs. Qualitative data were collected through focus group discussions at study exit. Multivariable associations between attribute opinions and overall product rating were examined using Poisson regression models with robust standard errors to assess the attributes most influential to satisfaction.

Results

Overall opinions of products and their individual attributes were generally positive; all products were rated either 4 or a 5 by ≥ 50% of participants. Attributes related to ease of use and interference with normal activities were the most salient predictors of satisfaction. Preferences for duration of use tended toward relatively shorter use periods for the ring (i.e., 1–3 months vs. 12 months) and for coitally independent dosing for the on-demand products.

Conclusions

How well a product fit in with participants’ lifestyles was important to their overall satisfaction. For on-demand products, greater flexibility around timing of use was desired, to avoid coital dependency of the dosing.

Electronic supplementary material

The online version of this article (10.1007/s10461-019-02576-8) contains supplementary material, which is available to authorized users.

Montmorillonite-based polyacrylamide hydrogel rings for controlled vaginal drug delivery

Vaginal drug delivery is regarded as a promising route against women-related health issues such as unwanted pregnancies and sexually transmitted infections. However, only a very few studies have been reported on the use of hydrogel rings with low cytotoxicity for vaginal drug delivery applications. Moreover, the effect of nanoparticles on hydrogel vaginal rings has not been clearly evaluated. To overcome these challenges, we hereby developed nanocomposite hydrogel rings based on polyacrylamide-sodium carboxymethyl cellulose-montmorillonite nanoparticles in the ring-shaped aluminum mold for controlled drug delivery. The hydrogel rings were synthesized by using N,N'-methylene bisacrylamide, N,N,N',N'-tetramethyl ethylene diamine, and ammonium persulfate, as a crosslinker, accelerator, and initiator, respectively. The obtained rings were 5.5 cm in diameters and 0.5 cm in rims. Chemical structures of the nanocomposite rings were confirmed by Fourier transform infrared, and Nuclear Magnetic Resonance spectroscopies. Additionally, the swelling ratio of hydrogels was appeared to be adjusted by the introduction of nanoparticles. In vitro release experiment of methylene blue, as a hydrophilic model drug, revealed that the nanocomposite rings could not only reduce burst effect (almost more than twice), but also achieve prolonged release for 15 days in the vaginal fluid simulant which mimic the vaginal conditions at pH of almost 4.2, and a temperature of 37 °C. Importantly, the resultant hydrogel rings with or without various concentrations of montmorillonite showed low cytotoxicity toward human skin fibroblasts. Furthermore, different antibacterial activities against Escherichia coli were observed for various concentrations of montmorillonite in hydrogels. These results suggest the great potential of montmorillonite-based hydrogel rings for vaginal drug delivery.

LDH hybrid thermosensitive hydrogel for intravaginal delivery of anti-HIV drugs

Microbicides based on hydrogel have become an effective way to prevent the HIV replication and transmission because of their convenience and prolonging drug release. In this study, a hybrid thermo-sensitive hydrogel constituted by nanosized layered double hydroxides and poloxamer 407 (P407) was constructed and co-loaded with both hydrophobic and hydrophilic drug. The LDH-P407 hydrogel could achieve sol-gel transition at body temperature. The in vivo experiment showed that LDH-P407 hydrogel can achieve controlled release of theaflavin and Nile red (hydrophobic drug model) into blood by vaginal drug delivery, meanwhile the hydrogel showed barely mucosal irritation. In addition, ex vivo experiment showed that the nifeviroc-loaded LDH-P407 hydrogel was able to specifically bind co-receptor CCR5 of DCs cells. Therefore, the LDH-P407 hydrogel would be a promising carrier for intravaginal delivery of anti-HIV drugs.

The cost-effectiveness of multi-purpose HIV and pregnancy prevention technologies in South Africa

Introduction

A number of antiretroviral HIV prevention products are efficacious in preventing HIV infection. However, the sexual and reproductive health needs of many women extend beyond HIV prevention, and research is ongoing to develop multi‐purpose prevention technologies (MPTs) that offer dual HIV and pregnancy protection. We do not yet know if these products will be an efficient use of constrained health resources. In this paper, we estimate the cost‐effectiveness of combinations of candidate multi‐purpose prevention technologies (MPTs), in South Africa among general population women and female sex workers (FSWs).

Methods

We combined a cost model with a static model of product impact based on incidence data in South Africa to estimate the cost‐effectiveness of five candidate co‐formulated or co‐provided MPTs: oral PrEP, intravaginal ring, injectable ARV, microbicide gel and SILCS diaphragm used in concert with gel. We accounted for the preferences of end‐users by predicting uptake using a discrete choice experiment (DCE). Product availability and protection were systematically varied in five potential rollout scenarios. The impact model estimated the number of infections averted through decreased incidence due to product use over one year. The comparator for each scenario was current levels of male condom use, while a health system perspective was used to estimate discounted lifetime treatment costs averted per HIV infection. Product benefit was estimated in disability‐adjusted life years (DALYs) averted. Benefits from contraception were incorporated through adjusting the uptake of these products based on the DCE and through estimating the costs averted from avoiding unwanted pregnancies. We explore the additional impact of STI protection through increased uptake in a sensitivity analysis.

Results

At central incidence rates, all single‐ and multi‐purpose scenarios modelled were cost‐effective among FSWs and women aged 16–24, at a governmental willingness‐to‐pay threshold of $1175/DALY averted (range: $214–$810/DALY averted among non‐dominant scenarios), however, none were cost‐effective among women aged 25–49 (minimum $1706/DALY averted). The cost‐effectiveness of products improved with additional protection from pregnancy. Estimates were sensitive to variation in incidence assumptions, but robust to other parameters.

Conclusions

To the best of our knowledge, this is the first study to estimate the cost‐effectiveness of a range of potential MPTs; suggesting that MPTs will be cost‐effective among higher incidence FSWs or young women, but not among lower incidence older women. More work is needed to make attractive MPTs available to potential users who could use them effectively.

Design, Characterization, and Biopharmaceutical Behavior of Nanoparticles Loaded with an HIV-1 Fusion Inhibitor Peptide

New therapeutic alternatives to fight against the spread of HIV-1 are based on peptides designed to inhibit the early steps of HIV-1 fusion in target cells. However, drawbacks, such as bioavailability, short half-life, rapid clearance, and poor ability to cross the physiological barriers, make such peptides unattractive for the pharmaceutical industry. Here we developed, optimized, and characterized polymeric nanoparticles (NPs) coated with glycol chitosan to incorporate and release an HIV-1 fusion inhibitor peptide (E1) inside the vaginal mucosa. The NPs were prepared by a modified double emulsion method, and optimization was carried out by a factorial design. In vitro, ex vivo, and in vivo studies were carried out to evaluate the optimized formulation. The results indicate that the physicochemical features of these NPs enable them to incorporate and release HIV fusion inhibitor peptides to the vaginal mucosa before the fusion step takes place.

Carrageenan based hydrogels for drug delivery, tissue engineering and wound healing

Carrageenan is a class of naturally occurring sulphated polysaccharides, which is currently a promising candidate in tissue engineering and regenerative medicine as it resemblances native glycosaminoglycans. From pharmaceutical drug formulations to tissue engineered scaffolds, carrageenan has broad range of applications. Here we provide an overview of developing various forms of carrageenan based hydrogels. We focus on how these fabrication processes has an effect on physiochemical properties of the hydrogel. We outline the application of these hydrogels not only pertaining to sustained drug release but also their application in bone and cartilage tissue engineering as well as in wound healing and antimicrobial formulations. Administration of these hydrogels through various routes for drug delivery applications has been critically reviewed. Finally, we conclude by summarizing the current and future outlook that promotes the seaweed-derived polysaccharide as versatile, promising biomaterial for a variety of bioengineering applications.

On-demand microbicide products: design matters

Sexual intercourse (vaginal and anal) is the predominant mode of human immunodeficiency virus (HIV) transmission. Topical microbicides used in an on-demand format (i.e., immediately before or after sex) can be part of an effective tool kit utilized to prevent sexual transmission of HIV. The effectiveness of prevention products is positively correlated with adherence, which is likely to depend on user acceptability of the product. The development of an efficacious and acceptable product is therefore paramount for the success of an on-demand product. Acceptability of on-demand products (e.g., gels, films, and tablets) and their attributes is influenced by a multitude of user-specific factors that span behavioral, lifestyle, socio-economic, and cultural aspects. In addition, physicochemical properties of the drug, anatomical and physiological aspects of anorectal and vaginal compartments, issues relating to large-scale production, and cost can impact product development. These factors together with user preferences determine the design space of an effective, acceptable, and feasible on-demand product. In this review, we summarize the interacting factors that together determine product choice and its target product profile.

pH-responsive delivery of Griffithsin from electrospun fibers

Human immunodeficiency virus (HIV-1) affects over 36 million people globally. Current prevention strategies utilize antiretrovirals that have demonstrated protection, but result in antiviral resistance, adverse toxicity, and require frequent administration. A novel biologic, griffithsin (GRFT), has demonstrated outstanding safety and efficacy against laboratory and primary HIV isolates and against intravaginal murine herpes simplex virus 2 (HSV-2) challenge, making it a promising microbicide candidate. However, transient activity and instability remain concerns surrounding biologic delivery, particularly in the harsh environment of the female reproductive tract (FRT). Recently, electrospun fibers (EFs) have demonstrated promise for intravaginal delivery, with the potential to conserve active agent until release is needed. The goal of this study was to fabricate and characterize pH-responsive fibers comprised of poly(lactic-co-glycolic acid) (PLGA) or methoxypolyethylene glycol-b-PLGA (mPEG-PLGA) with varying ratios of poly(n-butyl acrylate-co-acrylic acid) (PBA-co-PAA), to selectively release GRFT under pH-conditions that mimic semen introduction. Fibers comprised of mPEG-PLGA:PBA-co-PAA (90:10 w/w) demonstrated high GRFT loading that was maintained within simulated vaginal fluid (SVF), and pH-dependent release upon exposure to buffered and SVF:simulated semen solutions. Moreover, GRFT fibers demonstrated potent in vitro efficacy against HIV-1 and safety in vaginal epithelial cells, suggesting their future potential for efficacious biologic delivery to the FRT.

Thermosensitive hydrogels a versatile concept adapted to vaginal drug delivery

Vaginal drug delivery represents an attractive strategy for local and systemic delivery of drugs otherwise poorly absorbed after oral administration. The rather dense vascular network, mucus permeability and the physiological phenomenon of the uterine first-pass effect can all be exploited for therapeutic benefit. However, several physiological factors such as an acidic pH, constant secretion, and turnover of mucus as well as varying thickness of the vaginal epithelium can impact sustained drug delivery. In recent years, polymers have been designed to tackle challenges mentioned above. In particular, thermosensitive hydrogels hold great promise due to their stability, biocompatibility, adhesion properties and adjustable drug release kinetics. Here, we discuss the physiological and anatomical uniqueness of the vaginal environment and how it impacts the safe and efficient vaginal delivery and also reviewed several thermosensitive hydrogels deemed suitable for vaginal drug delivery by addressing specific characteristics, which are essential to engage the vaginal environment successfully.

Dynamic mechanical behaviour of nanoparticle loaded biodegradable PVA films for vaginal drug delivery

In this study, we investigated the viscoelastic and mechanical behaviour of polyvinyl alcohol films formulated along with carrageenan, plasticizing agents (polyethylene glycol and glycerol), and when loaded with nanoparticles as a model for potential applications as microbicides. The storage modulus, loss modulus and glass transition temperature were determined using a dynamic mechanical analyzer. Films fabricated from 2% to 5% polyvinyl alcohol containing 3 mg or 5 mg of fluorescently labeled nanoparticles were evaluated. The storage modulus and loss modulus values of blank films were shown to be higher than the nanoparticle-loaded films. Glass transition temperature determined using the storage modulus, and loss modulus was between 40-50℃ and 35-40℃, respectively. The tensile properties evaluated showed that 2% polyvinyl alcohol films were more elastic but less resistant to breaking compared to 5% polyvinyl alcohol films (2% films break around 1 N load and 5% films break around 7 N load). To our knowledge, this is the first study to evaluate the influence of nanoparticle and film composition on the physico-mechanical properties of polymeric films for vaginal drug delivery.

Sustained Simultaneous Delivery of Metronidazole and Doxycycline From Polycaprolactone Matrices Designed for Intravaginal Treatment of Pelvic Inflammatory Disease

Poly(ɛ-caprolactone) (PCL) intravaginal matrices were produced for local delivery of a combination of antibacterials, by rapidly cooling a mixture of drug powders dispersed in PCL solution. Matrices loaded with different combinations of metronidazole (10%, 15%, and 20% w/w) and doxycycline (10% w/w) were evaluated in vitro for release behavior and antibacterial activity. Rapid "burst release" of 8%-15% of the doxycycline content and 31%-37% of the metronidazole content occurred within 24 h when matrices were immersed in simulated vaginal fluid at 37°C. The remaining drug was extracted gradually over 14 days to a maximum of 65%-73% for doxycycline and 62%-71% for metronidazole. High levels of antibacterial activity up to 89%-91% against Gardnerella vaginalis and 84%-92% against Neisseria gonorrhoeae were recorded in vitro for release media collected on day 14, compared to "nonformulated" metronidazole and doxycycline solutions. Based on the in vitro data, the minimum levels of doxycycline and metronidazole released from PCL matrices in the form of intravaginal rings into vaginal fluid in vivo were predicted to exceed the minimum inhibitory concentrations for N. gonorrhea (reported range 0.5-4.0 μg/mL) and G. vaginalis (reported range 2-12.8 μg/mL) respectively, which are 2 of the major causative agents for pelvic inflammatory disease.

Layer-by-Layer Engineered Microbicide Drug Delivery System Targeting HIV-1 gp120: Physicochemical and Biological Properties

The purpose of this study was to engineer a model anti-HIV microbicide (tenofovir) drug delivery system targeting HIV-1 envelope glycoprotein gp120 (HIV-1 g120) for the prevention of HIV sexual transmission. HIV-1 g120 and mannose responsive particles (MRP) were prepared through the layer-by-layer coating of calcium carbonate (CaCO₃) with concanavalin A (Con A) and glycogen. MRP average particle size ranged from 881.7 ± 15.45 nm to 1130 ± 15.72 nm, depending on the number of Con A layers. Tenofovir encapsulation efficiency in CaCO₃ was 74.4% with drug loading of 16.3% (w/w). MRP was non-cytotoxic to Lactobacillus crispatus, human vaginal keratinocytes (VK2), and murine macrophage RAW 264.7 cells and did not induce any significant proinflammatory nitric oxide release. Overall, compared to control, no statistically significant increase in proinflammatory cytokine IL-1α, IL-1β, IL-6, MKC, IL-7, and interferon-γ-inducible protein 10 (IP10) levels was observed. Drug release profiles in the presence of methyl α-d-mannopyranoside and recombinant HIV-1 envelope glycoprotein gp120 followed Hixson-Crowell and Hopfenberg kinetic models, indicative of a surface-eroding system. The one Con A layer containing system was found to be the most sensitive (∼2-fold increase in drug release vs control SFS:VFS) at the lowest HIV gp120 concentration tested (25 μg/mL). Percent mucoadhesion, tested ex vivo on porcine vaginal tissue, ranged from 10% to 21%, depending on the number of Con A layers in the formulation. Collectively, these data suggested that the proposed HIV-1 g120 targeting, using MRP, potentially represent a safe and effective template for vaginal microbicide drug delivery, if future preclinical studies are conclusive.

Vaginal semisolid products: Technological performance considering physiologic parameters

Vaginal semisolid products are frequently used to treat vaginal infections and atrophy-related symptoms of menopause. Formulations composition and the methods for their characterization, especially those developed concerning the target epithelia, are key tools to predict in vivo results at early stages of product development. However, recent studies on this subject have been almost exclusively focused on anti-HIV preparations. The aim of this work consists on improving traditional characterization methods by using physiological parameters in order to construct predictive tools to characterize a new ideal vaginal semisolid formulation whatever target it may have. Ten vaginal antimicrobial and hormonal products already available in the market were studied (Gino-Canesten®, Sertopic®, Dermofix®, Gyno-pevaryl®, Lomexin®, Gino Travogen®, Dalacin V®, Ovestin®, Blissel®, Colpotrophine®). Furthermore, Universal Placebo gel and Replens® were used for comparison. Products were characterized in terms of: pH and buffering capacity in a vaginal fluid simulant (VFS); osmolality - directly and upon dilution in VFS; textural parameters (firmness, adhesiveness and bioadhesion) using vaginal ex vivo porcine epithelium; and viscosity (including VFS dilution at 37°C and after administration on an ex vivo model). Interestingly, the majority of the tested commercial vaginal formulations did not present technological characteristics close to the ideal ones when tested under target biological conditions. The inclusion of such methodologic adaptations is expected to optimize cost-efficiency of new formulations development by predicting efficacy and safety profiles at early stages of product development.

Comparison of the vaginal environment in rhesus and cynomolgus macaques pre- and post-lactobacillus colonization

BACKGROUND

Rhesus and cynomologus macaques are valuable animal models for the study of human immunodeficiency virus (HIV) prevention strategies. However, for such studies focused on the vaginal route of infection, differences in vaginal environment may have deterministic impact on the outcome of such prevention, providing the rationale for this study.

METHODS

We tested the vaginal environment of rhesus and cynomolgus macaques longitudinally to characterize the normal microflora based on Nugent scores and pH. This evaluation was extended after colonization of the vaginal space with Lactobacilli in an effort to recreate NHP models representing the healthy human vaginal environment.

RESULTS AND CONCLUSION

Nugent scores and pH differed significantly between species, although data from both species were suggestive of stable bacterial vaginosis. Colonization with Lactobacilli was successful in both species leading to lower Nugent score and pH, although rhesus macaques appeared better able to sustain Lactobacillus spp over time.

Freeze-dried cylinders carrying chitosan nanoparticles for vaginal peptide delivery

Recently nanoparticle-based vaginal drug delivery formulations have been acquiring great attention for the administration of peptide based-vaccines or microbicides to prevent or treat sexually transmitted diseases. In this work, a straightforward and efficient strategy for the vaginal application and release of peptide-loaded mucoadhesive nanoparticles was developed. This essentially consists of chitosan nanoparticles encapsulated in suitable hydrophilic freeze-dried cylinders. Chitosan nanoparticles are responsible for carrying the peptide drug and allowing adhesion to the vaginal mucosal epithelium. Hydrophilic freeze-dried cylinders facilitate the application and quick release of the nanoparticles to the vaginal zone. Upon contact with the aqueous vaginal medium, the excipients constituting these sponge-like systems are quickly dissolved enabling the release of their content. In vitro release studies showed the ability of the sponge-like systems and chitosan nanoparticles to deliver the mucoadhesive nanoparticles and peptide respectively. CLSM micrographs proved the nanoparticles ability promoting the peptide penetration inside the vaginal mucosa.

Evaluation of Vaginal Drug Levels and Safety of a Locally Administered Glycerol Monolaurate Cream in Rhesus Macaques

The human immunodeficiency virus epidemic affects millions of people worldwide. As women are more vulnerable to infection, female-controlled interventions can help control the spread of the disease significantly. Glycerol monolaurate (GML), an inexpensive and safe compound, has been shown to protect against simian immunodeficiency virus infection when applied vaginally. However, on account of its low aqueous solubility, fabrication of high-dose formulations of GML has proven difficult. We describe the development of a vaginal cream that could be loaded with up to 35% GML. Vaginal drug levels and safety of 3 formulations containing increasing concentrations of GML (5%w/w, 15%w/w, and 35%w/w) were tested in rhesus macaques after vaginal administration. GML concentration in the vaginal tissue increased as the drug concentration in the cream increased, with 35% GML cream resulting in tissue concentration of ∼0.5 mg/g, albeit with high interindividual variability. Compared with the vehicle control, none of the GML creams had any significant effect on the vaginal flora and cytokine (macrophage inflammatory protein 3α and interleukin 8) levels, suggesting that high-dose GML formulations do not induce local adverse effects. In summary, we describe the development of a highly loaded vaginal cream of GML, and vaginal drug levels and safety after local administration in macaques.

Evaluation of poly(lactic-co-glycolic acid) and poly(dl-lactide-co-ε-caprolactone) electrospun fibers for the treatment of HSV-2 infection

More diverse multipurpose prevention technologies are urgently needed to provide localized, topical pre-exposure prophylaxis against sexually transmitted infections (STIs). In this work, we established the foundation for a multipurpose platform, in the form of polymeric electrospun fibers (EFs), to physicochemically treat herpes simplex virus 2 (HSV-2) infection. To initiate this study, we fabricated different formulations of poly(lactic-co-glycolic acid) (PLGA) and poly(dl-lactide-co-ε-caprolactone) (PLCL) EFs that encapsulate Acyclovir (ACV), to treat HSV-2 infection in vitro. Our goals were to assess the release and efficacy differences provided by these two different biodegradable polymers, and to determine how differing concentrations of ACV affected fiber efficacy against HSV-2 infection and the safety of each platform in vitro. Each formulation of PLGA and PLCL EFs exhibited high encapsulation efficiency of ACV, sustained-delivery of ACV through one month, and in vitro biocompatibility at the highest doses of EFs tested. Additionally, all EF formulations provided complete and efficacious protection against HSV-2 infection in vitro, regardless of the timeframe of collected fiber eluates tested. This work demonstrates the potential for PLGA and PLCL EFs as delivery platforms against HSV-2, and indicates that these delivery vehicles may be expanded upon to provide protection against other sexually transmitted infections.

Application of nanotechnology for the development of microbicides

The vaginal route is increasingly being considered for both local and systemic delivery of drugs, especially those unsuitable for oral administration. One of the opportunities offered by this route but yet to be fully utilised is the administration of microbicides. Microbicides have an unprecedented potential for mitigating the global burden from HIV infection as heterosexual contact accounts for most of the new infections occurring in sub-Saharan Africa, the region with the highest prevalent rates. Decades of efforts and massive investment of resources into developing an ideal microbicide have resulted in disappointing outcomes, as attested by several clinical trials assessing the suitability of those formulated so far. The highly complex and multi-level biochemical interactions that must occur among the virus, host cells and the drug for transmission to be halted means that a less sophisticated approach to formulating a microbicide e.g. conventional gels, etc may have to give way for a different formulation approach. Nanotechnology has been identified to offer prospects for fabricating structures with high capability of disrupting HIV transmission. In this review, predominant challenges seen in microbicide development have been highlighted and possible ways of surmounting them suggested. Furthermore, formulations utilising some of these highly promising nanostructures such as liposomes, nanofibres and nanoparticles have been discussed. A perspective on how a tripartite collaboration among governments and their agencies, the pharmaceutical industry and academic scientists to facilitate the development of an ideal microbicide in a timely manner has also been briefly deliberated.

Reversibly pH-responsive polyurethane membranes for on-demand intravaginal drug delivery

To provide better protection for women against sexually transmitted infections, on-demand intravaginal drug delivery was attempted by synthesizing reversibly pH-sensitive polyether-polyurethane copolymers using poly(ethylene glycol) (PEG) and 1,4-bis(2-hydroxyethyl)piperazine (HEP). Chemical structure and thermo-characteristics of the synthesized polyurethanes were confirmed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), ¹H-nuclear magnetic resonance (¹H-NMR), and melting point testing. Membranes were cast by solvent evaporation method using the prepared pH-sensitive polyurethanes. The impact of varying pH on membrane swelling and surface morphology was evaluated via swelling ratio change and scanning electron microscopy (SEM). The prepared pH-responsive membranes showed two times higher swelling ratio at pH 4 than pH 7 and pH-triggered switchable surface morphology change. The anionic anti-inflammatory drug diclofenac sodium (NaDF) was used as a model compound for release studies. The prepared pH-responsive polyurethane membranes allowed continuous NaDF release for 24h and around 20% release of total NaDF within 3h at pH 7 but little-to-no drug release at pH 4.5. NaDF permeation across the prepared membranes demonstrated a reversible pH-responsiveness. The pH-responsive polyurethane membranes did not show any noticeable negative impact on vaginal epithelial cell viability or induction of pro-inflammatory cytokine production compared to controls. Overall, the non-cytotoxic HEP-based pH-responsive polyurethane demonstrated its potential to be used in membrane-based implants such as intravaginal rings to achieve on-demand "on-and-off" intravaginal drug delivery.

STATEMENT OF SIGNIFICANCE

A reversible and sharp switch between "off" and "on" drug release is achieved for the first time through new pH-sensitive polyurethane membranes, which can serve as window membranes in reservoir-type intravaginal rings for on-demand drug delivery to prevent sexually transmitted infections (STIs). Close to zero drug release occurs at the normal vaginal pH (4.5) for minimal side effects. Drug release is only triggered by elevation of pH to 7 during heterosexual intercourse. The reversibly sharp and fast "on-and-off" switch arises from the creative incorporation of a pH-sensitive monomer in the soft segment of polyurethane. This polyurethane biomaterial holds great potential to better protect women who are generally at higher risk and are more vulnerable to STIs.

Griffithsin-Modified Electrospun Fibers as a Delivery Scaffold To Prevent HIV Infection

Despite current prophylactic strategies, sexually transmitted infections (STIs) remain significant contributors to global health challenges, spurring the development of new multipurpose delivery technologies to protect individuals from and treat virus infections. However, there are few methods currently available to prevent and no method to date that cures human immunodeficiency virus (HIV) infection or combinations of STIs. While current oral and topical preexposure prophylaxes have protected against HIV infection, they have primarily relied on antiretrovirals (ARVs) to inhibit infection. Yet continued challenges with ARVs include user adherence to daily treatment regimens and the potential toxicity and antiviral resistance associated with chronic use. The integration of new biological agents may avert some of these adverse effects while also providing new mechanisms to prevent infection. Of the biologic-based antivirals, griffithsin (GRFT) has demonstrated potent inhibition of HIV-1 (and a multitude of other viruses) by adhering to and inactivating HIV-1 immediately upon contact. In parallel with the development of GRFT, electrospun fibers (EFs) have emerged as a promising platform for the delivery of agents active against HIV infection. In the study described here, our goal was to extend the mechanistic diversity of active agents and electrospun fibers by incorporating the biologic GRFT on the EF surface rather than within the EFs to inactivate HIV prior to cellular entry. We fabricated and characterized GRFT-modified EFs (GRFT-EFs) with different surface modification densities of GRFT and demonstrated their safety and efficacy against HIV-1 infection in vitro We believe that EFs are a unique platform that may be enhanced by incorporation of additional antiviral agents to prevent STIs via multiple mechanisms.

Past, Present, and Future Drug Delivery Systems for Antiretrovirals

The human immunodeficiency virus has infected millions of people and the epidemic continues to grow rapidly in some parts of the world. Antiretroviral (ARV) therapy has provided improved treatment and prolonged the life expectancy of patients. Moreover, there is growing interest in using ARVs to protect against new infections. Hence, ARVs have emerged as our primary strategy in combating the virus. Unfortunately, several challenges limit the optimal performance of these drugs. First, ARVs often require life-long use and complex dosing regimens. This results in low patient adherence and periods of lapsed treatment manifesting in drug resistance. This has prompted the development of alternate dosage forms such as vaginal rings and long-acting injectables that stand to improve patient adherence. Another problem central to therapeutic failure is the inadequate penetration of drugs into infected tissues. This can lead to incomplete treatment, development of resistance, and viral rebound. Several strategies have been developed to improve drug penetration into these drug-free sanctuaries. These include encapsulation of drugs in nanoparticles, use of pharmacokinetic enhancers, and cell-based drug delivery platforms. In this review, we discuss issues surrounding ARV therapy and their impact on drug efficacy. We also describe various drug delivery-based approaches developed to overcome these issues.

Expression, regulation, and function of drug transporters in cervicovaginal tissues of a mouse model used for microbicide testing

P-glycoprotein (P-gp), breast cancer resistance protein (BCRP), and multidrug resistance protein 4 (MRP4) are three efflux transporters that play key roles in the pharmacokinetics of antiretroviral drugs used in the pre-exposure prophylaxis of HIV sexual transmission. In this study, we investigated the expression, regulation, and function of these transporters in cervicovaginal tissues of a mouse model. Expression and regulation were examined using real-time RT-PCR and immunohistochemical staining, in the mouse tissues harvested at estrus and diestrus stages under natural cycling or after hormone synchronization. The three transporters were expressed at moderate to high levels compared to the liver. Transporter proteins were localized in various cell types in different tissue segments. Estrous cycle and exogenous hormone treatment affected transporter mRNA and protein expression, in a tissue- and transporter-dependent manner. Depo-Provera-synchronized mice were dosed vaginally or intraperitoneally with (3)H-TFV, with or without MK571 co-administration, to delineate the function of cervicovaginal Mrp4. Co-administration of MK571 significantly increased the concentration of vaginally-administered TFV in endocervix and vagina. MK571 increased the concentration of intraperitoneally-administered TFV in the cervicovaginal lavage and vagina by several fold. Overall, P-gp, Bcrp, and Mrp4 were positively expressed in mouse cervicovaginal tissues, and their expression can be regulated by the estrous cycle or by exogenous hormones. In this model, the Mrp4 transporter impacted TFV distribution in cervicovaginal tissues.

Progress and Perspectives on HIV-1 microbicide development

The majority of HIV-1 infections occur via sexual intercourse. Women are the most affected by the epidemic, particularly in developing countries, due to their socio-economic dependence on men and the fact that they are often victims of gender based sexual violence. Despite significant efforts that resulted in the reduction of infection rates in some countries, there is still need for effective prevention methods against the virus. One of these methods for preventing sexual transmission in women is the use of microbicides. In this review we provide a summary of the progress made toward the discovery of affordable and effective HIV-1 microbicides and suggest future directions. We show that there is a wide range of compounds that have been proposed as potential microbicides. Although most of them have so far failed to show protection in humans, there are many promising ones currently in pre-clinical studies and in clinical trials.

Safety and Pharmacokinetics of Quick-Dissolving Polymeric Vaginal Films Delivering the Antiretroviral IQP-0528 for Preexposure Prophylaxis

For human immunodeficiency virus (HIV) prevention, microbicides or drugs delivered as quick-dissolving films may be more acceptable to women than gels because of their compact size, minimal waste, lack of an applicator, and easier storage and transport. This has the potential to improve adherence to promising products for preexposure prophylaxis. Vaginal films containing IQP-0528, a nonnucleoside reverse transcriptase inhibitor, were evaluated for their pharmacokinetics in pigtailed macaques. Polymeric films (22 by 44 by 0.1 mm; providing 75% of a human dose) containing IQP-0528 (1.5%, wt/wt) with and without poly(lactic-co-glycolic acid) (PLGA) nanoparticle encapsulation were inserted vaginally into pigtailed macaques in a crossover study design (n = 6). With unencapsulated drug, the median (range) vaginal fluid concentrations of IQP-0528 were 160.97 (2.73 to 2,104), 181.79 (1.86 to 15,800), and 484.50 (8.26 to 4,045) μg/ml at 1, 4, and 24 h after film application, respectively. Median vaginal tissue IQP-0528 concentrations at 24 h were 3.10 (0.03 to 222.58) μg/g. The values were similar at locations proximal, medial, and distal to the cervix. The IQP-0528 nanoparticle-formulated films delivered IQP-0528 in vaginal tissue and secretions at levels similar to those obtained with the unencapsulated formulation. A single application of either formulation did not disturb the vaginal microflora or the pH (7.24 ± 0.84 [mean ± standard deviation]). The high mucosal IQP-0528 levels delivered by both vaginal film formulations were between 1 and 5 log higher than the in vitro 90% inhibitory concentration (IC90) of 0.146 μg/ml. The excellent coverage and high mucosal levels of IQP-0528, well above the IC90, suggest that the films may be protective and warrant further evaluation in a vaginal repeated low dose simian-human immunodeficiency virus (SHIV) transmission study in macaques and clinically in women.

Perceptibility and the "Choice Experience": User Sensory Perceptions and Experiences Inform Vaginal Prevention Product Design

The development of pericoital (on demand) vaginal HIV prevention technologies remains a global health priority. Clinical trials to date have been challenged by nonadherence, leading to an inability to demonstrate product efficacy. The work here provides new methodology and results to begin to address this limitation. We created validated scales that allow users to characterize sensory perceptions and experiences when using vaginal gel formulations. In this study, we sought to understand the user sensory perceptions and experiences (USPEs) that characterize the preferred product experience for each participant. Two hundred four women evaluated four semisolid vaginal formulations using the USPE scales at four randomly ordered formulation evaluation visits. Women were asked to select their preferred formulation experience for HIV prevention among the four formulations evaluated. The scale scores on the Sex-associated USPE scales (e.g., Initial Penetration and Leakage) for each participant's selected formulation were used in a latent class model analysis. Four classes of preferred formulation experiences were identified. Sociodemographic and sexual history variables did not predict class membership; however, four specific scales were significantly related to class: Initial Penetration, Perceived Wetness, Messiness, and Leakage. The range of preferred user experiences represented by the scale scores creates a potential target range for product development, such that products that elicit scale scores that fall within the preferred range may be more acceptable, or tolerable, to the population under study. It is recommended that similar analyses should be conducted with other semisolid vaginal formulations, and in other cultures, to determine product property and development targets.

Engineering immunity in the mucosal niche against sexually transmitted infections

The mucosal surfaces of the genital tract are the site of entry to over 30 different bacterial, parasitic, and viral pathogens that are the cause of sexually transmitted infections (STIs) including HIV. Women and adolescent girls are more severely impacted by STIs than men due in part to a greater biological susceptibility for acquiring infections and differences in disease sequelae. While it is widely accepted that preventative vaccines against the most commonly transmitted STIs would have a major impact on decreasing the global health burden of STIs for women worldwide, several challenges preclude their development. The female genital tract is a complex niche of microflora, hormonal influences, and immune tissues and cells that result in a mucosal immune system that is distinct from other mucosal sites and from our systemic immune system. An appreciation of these differences and their effect on shaping mucosal immunity to sexually transmitted pathogens is an important determinant for the design of effective STI vaccines. Here we describe the anatomy and mucosal immune system of the female reproductive tract, and discuss bioengineering strategies to design mucosal vaccines that overcome delivery challenges and coordinate the presentation kinetics and compartmentalization of antigens and adjuvants to relevant mucosal immune cell subsets. In particular, we describe recent progress in understanding the role of specific mucosal dendritic cell subsets in facilitating immune responses to pathogenic microbes in the genital mucosa. We also discuss the development of pathogen-mimicking materials that may be useful for engineering protective immunity in this mucosal niche.

Drug transporters in tissues and cells relevant to sexual transmission of HIV: Implications for drug delivery

Efflux and uptake transporters of drugs are key regulators of the pharmacokinetics of many antiretroviral drugs. A growing body of literature has revealed the expression and functionality of multiple transporters in female genital tract (FGT), colorectal tissue, and immune cells. Drug transporters could play a significant role in the efficacy of preventative strategies for HIV-1 acquisition. Pre-exposure prophylaxis (PrEP) is a promising strategy, which utilizes topically (vaginally or rectally), orally or other systemically administered antiretroviral drugs to prevent the sexual transmission of HIV to receptive partners. The drug concentration in the receptive mucosal tissues and target immune cells for HIV is critical for PrEP effectiveness. Hence, there is an emerging interest in utilizing transporter information to explain tissue disposition patterns of PrEP drugs, to interpret inter-individual variability in PrEP drug pharmacokinetics and effectiveness, and to improve tissue drug exposure through modulation of the cervicovaginal, colorectal, or immune cell transporters. In this review, the existing literature on transporter expression, functionality and regulation in the transmission-related tissues and cells is summarized. In addition, the relevance of transporter function for drug delivery and strategies that could exploit transporters for increased drug concentration at target locales is discussed. The overall goal is to facilitate an understanding of drug transporters for PrEP optimization.

New strategies for local treatment of vaginal infections

Vaginal infections are extremely prevalent, particularly among women of reproductive age. Although they do not result in high mortality rates, these infections are associated with high levels of anxiety and reduction of quality of life. In most cases, topical treatment of vaginal infections has been shown to be at least as effective as oral treatment, resulting in higher local drug concentrations, with fewer drug interactions and adverse effects. Furthermore, the emergence of microbial resistance to chemotherapeutics and the difficulties in managing infection recurrences sustain the need for more effective local treatments. However, conventional dosage forms have been associated with low retention in the vagina and discomfort. Formulation strategies such as the development of bioadhesive, thermogelling systems and microtechnological or nanotechnological approaches have been proposed to improve delivery of traditional drugs, and other treatment modalities such as new drugs, plant extracts, and probiotics are being studied. This article reviews the recent strategies studied to improve the treatment and prevention of the commonest vaginal infections-namely, vaginal bacteriosis, aerobic vaginitis, vulvovaginal candidosis, and trichomoniasis-through the intravaginal route.