Study of in vitro drug release and percutaneous absorption of fluconazole from topical dosage forms

Dexibuprofen loaded into nanoemulsion based gel for topical application - In vitro characterization and in vivo anti-inflammatory evaluation

Arthritic disease is one of the most common diseases in adults and a leading cause of joint degeneration. Dexibuprofen (DEX) is routinely used for the treatment of rheumatoid arthritis, acute postoperative pain, primary dysmenorrheal, and in lower back pain. However, it is poorly water soluble with compromised bioavailability, and hence has limited therapeutic activity. In order to overcome these issues, we studied the formulation and characterization of nanoemulsion based system i.e nanoemulgel of DEX. This study aimed to prepare topical nanoemulgel containing 2 % DEX and solubility-enhanced DEX via ternary inclusion complexation (DEX-SE-T) and to compare it with commercially available 5 % Ibuprofen gel as there is no topical formulation of DEX is available in the market currently. A pseudoternary phase diagram was constructed using the spontaneous water titration method. Blank and drug-loaded nanoemulgel were prepared using a high-speed homogenization method. All the formulations were evaluated in terms of particle size, pH, conductivity, viscosity, zeta potential, and ex vivo drug permeation. DEX loaded nanoemulgel yield enhanced in vitro skin permeation than the commercially available 5 % ibuprofen gel. The optimized nanoemulgel formulation (DEX-SE-T) was tested in in vivo anti-inflammatory models including cotton pellets-induced abdominal granuloma (chronic inflammation) and carrageenan-induced paw edema (acute inflammation). DEX-SE-T loaded nanoemulgel has improved in vivo anti-inflammatory activity as compared to ibuprofen gel. DEX-SE-T could be a promising option for effective topical treatment of inflammatory conditions.

Pickering Emulsion-Based Gels with Halloysite as a Stabilizer: Formulation, Mechanical Properties and In Vitro Drug Release Studies

Lidocaine is an analgesic agent frequently incorporated in topical formulations intended for application in minor surgical procedures or relieving neuropathic pain associated with numerous conditions, including post-herpetic neuralgia or diabetic peripheral neuropathy. In this study, Pickering o/w emulsions with halloysite nanotubes as a stabilizing agent and lidocaine incorporated in the internal phase were formulated with the use of the Quality by Design (QbD) approach. The selected emulsions were transformed into semisolid gels with poloxamer 407 as a thickening agent, and investigated for rheological and textural properties, indicating the mechanical features of the obtained gels. Moreover, the obtained formulations were tested for lidocaine release with the use of vertical Franz diffusion cells in order to assess the relationship between the applied composition and potential clinical applicability of the analyzed gels. The obtained results indicate that the emulsion droplet diameter is affected mostly by the oil and halloysite contents. The yield stress points, hardness and cohesiveness values of the obtained gels increased with the oil content. The drug release rate seems to be affected mostly by the concentration of the active ingredient in the oil phase.

Understanding Microemulsions and Nanoemulsions in (Trans)Dermal Delivery

Continuously explored in pharmaceuticals, microemulsions and nanoemulsions offer drug delivery opportunities that are too significant to ignore, namely safe delivery of clinically relevant drug doses across biological membranes. Their effectiveness as drug vehicles in mucosal and (trans)dermal delivery is evident from the volume of published literature. Commonly, their ability to enhance skin permeation is attributed to dispersion size, a characteristic closely related to solubilization capacity. However, the literature falls short on distinctions between microemulsions and nanoemulsions for definitions, behavior, or specific differences in their mechanisms of action in (trans)dermal delivery. The focus is typically on surfactant/cosurfactant ratio and droplet size but the role of mesostructures or the effect of cosolvent (Csol), oil (O) or water (W) on permeation profile remain poorly explained. Towards a deeper understanding of these vehicles in (trans)dermal drug delivery, this review begins with their conceptual and practical distinctions before delving into the published works for less obvious but potentially important underlying mechanisms; notably composition and the competitive positioning of system constituents in the resulting microstructures and subsequent effect(s) these may have on skin structures and drug permeability. For practical purposes, this review focuses on formulation systems based on ternary diagrams with commonly accepted non-ionic surfactants, cosurfactants, cosolvents, and oils used in pharmaceutical applications.

Microemulsion-Based Polymer Gels with Ketoprofen and Menthol: Physicochemical Properties and Drug Release Studies

Ketoprofen is a non-steroidal, anti-inflammatory drug frequently incorporated in topical dosage forms which are an interesting alternatives for oral formulations. However, due to the physiological barrier function of skin, topical formulations may require some approaches to improve drug permeation across the skin. In this study, ketoprofen-loaded microemulsion-based gels with the addition of menthol, commonly known for absorption-enhancing activity in dermal products, were investigated. The main objective of this study was to analyze the physicochemical properties of the obtained gels in terms of topical application and to investigate the correlation between the gel composition and its mechanical properties and the drug release process. Microemulsion composition was selected with the use of a pseudoternary plot and the selected systems were tested for electrical conductivity, viscosity, pH, and particle diameter. The polymer gels obtained with Carbopol® EZ-3 were subjected to rheological and textural studies, as well as the drug release experiment. The obtained results indicate that the presence of ketoprofen slightly decreased yield stress values. A stronger effect was exerted by menthol presence, even though it was independent of menthol concentration. A similar tendency was seen for hardness and adhesiveness, as tested in texture profile analysis. Sample cohesiveness and the drug release rate were independent of the gel composition.

In vitro and Ex vivo study targeting the development of a Lavandula stoechas L. (Ustukhuddūs) loaded Unani Transdermal patch: Implication of Unani Medicine in the treatment of Nisyan (Dementia)

Ustukhuddūs (Lavandula stoechas L.) has been extensively used orally and topically in treating various neurological disorders, including dementia. The optimum potential of traditional dosage forms of Ustukhuddūs is limited for various reasons. Transdermal drug delivery system (TDDS) is a novel means of drug delivery and is known to overcome the drawbacks associated with traditional dosage forms. The current study aimed at fabricating and evaluating Ustukhuddūs hydro-alcoholic extract (UHAE) and essential oil (UEO) loaded matrix-type transdermal patches having a combination of hydrophilic - hydroxyl propyl methyl cellulose (HPMC) and hydrophobic - ethyl cellulose (EC) polymers. ATR-FTIR, DSC, XRD, and SEM analysis were carried out to study drug-polymer interactions, confirming the formation of developed patches and drug compatibility with excipients. We assessed the fabricated patches to evaluate their physicochemical properties, in vitro drug release, and permeation characteristics via ex vivo experiments. The physicochemical characteristics of patches showcased the development of good and stable films with clarity, smoothness, homogeneity, optimum flexibility and free from causing skin irritancy or sensitization. In vitro drug release and ex vivo permeation profile of developed patches were evaluated employing Franz diffusion cells. UHAE and UEO patches exhibited a cumulative drug release of 81.61 and 85.24 %, respectively, in a sustained-release manner and followed non-Fickian release mechanisms. The ex vivo permeation data revealed 66.82 % and 76.41 % of drug permeated from UHAE and UEO patches, respectively. The current research suggests that the formulated patches are more suitable for TDDS and hold potential significance in the treatment of dementia, contributing to enhanced patient compliance, thereby highlighting the implication of Unani Medicine in Nisyan (Dementia) treatment.

Topical Cream Carrying Drug-Loaded Nanogels for Melanoma Treatment

In this study, nanogel creams carrying paclitaxel (PTX) and temozolomide (TMZ) were prepared for the topical treatment of melanoma. PTX and TMZ were first loaded in poly-(D,L-lactide-co-glycolide)-block-poly(ethylene glycol)-block-poly-(D,L-lactide-co-glycolide) (PLAG-b-PEG-b-PLGA) thermosensitive nanogels, which made a transition from a free-flowing sol (formation of micellar network) at 25°C with the z-average particle size of c.a. 96 nm to a gel (aggregation of micelles) at 33°C with the z-average particle size of c.a. 427 nm. An anhydrous absorption ointment base, aquaphor, was then added to drug-loaded nanogels to form nanogel creams carrying PTX and TMZ. Nanogel creams permitted controlled release of the payloads and improved the penetration of the payloads through the rodent skin compared to drug(s)-loaded nanogels. PTX and TMZ in a combination were synergistically effective in inhibiting SK-MEL28, A375, and B16-F10 melanoma cancer cells in vitro. Topically applied nanogel creams carrying TMZ/PTX (4 mg/1.5 mg/dose) showed a trend of tumor volume inhibition on B16-F10-bearing xenograft mice in vivo.

Topical Delivery of Diacetyl Boldine in a Microemulsion Formulation for Chemoprotection against Melanoma

This study aimed to develop a microemulsion formulation for topical delivery of Diacetyl Boldine (DAB) and to evaluate its cytotoxicity against melanoma cell line (B16BL6) in vitro. Using a pseudo-ternary phase diagram, the optimal microemulsion formulation region was identified, and its particle size, viscosity, pH, and in vitro release characteristics were determined. Permeation studies were performed on excised human skin using Franz diffusion cell assembly. The cytotoxicity of the formulations on B16BL6 melanoma cell lines was evaluated by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide) assay. Two formulation compositions were selected based on the higher microemulsion area of the pseudo-ternary phase diagrams. The formulations showed a mean globule size of around 50 nm and a polydispersity index of <0.2. The ex vivo skin permeation study demonstrated that the microemulsion formulation exhibited significantly higher skin retention levels than the DAB solution in MCT oil (Control, DAB-MCT). Furthermore, the formulations showed substantially higher cytotoxicity toward B16BL6 cell lines than the control formulation (p < 0.001). The half-maximal inhibitory concentrations (IC50) of F1, F2, and DAB-MCT formulations against B16BL6 cells were calculated to be 1 µg/mL, 10 µg/mL, and 50 µg/mL, respectively. By comparison, the IC50 of F1 was 50-fold lower than that of the DAB-MCT formulation. The results of the present study suggest that microemulsion could be a promising formulation for the topical administration of DAB.

Dermal Penetration Studies of Potential Phenolic Compounds Ex Vivo and Their Antioxidant Activity In Vitro

Phenolic compounds with miscellaneous biological activities are an interesting component in dermatology and cosmetology practices. The aim of our study was to determine the phenolic compounds released from emulsion, emulgel, gel, ointment, and oleogel formulations penetration into human skin layers, both the epidermis and dermis, and estimate their antioxidant activity. The ex vivo penetration study was performed using Bronaugh type flow-through diffusion cells. Penetration studies revealed that, within 24 h, the chlorogenic acid released from the oleogel penetrated into skin layers to a depth of 2.0 ± 0.1 µg/mL in the epidermis and 1.5 ± 0.07 µg/mL in the dermis. The oleogel-released complex of phenolic compounds penetrating into epidermis showed the strongest DPPH free radical scavenging activity (281.8 ± 14.1 µM TE/L). The study estimated a strong positive correlation (r = 0.729) between the amount of quercetin penetrated into epidermis and the antioxidant activity detected in the epidermis extract. Plant based phenolic compounds demonstrated antioxidant activity and showed great permeability properties through the skin.

Transdermal permeation of curcumin promoted by choline geranate ionic liquid: Potential for the treatment of skin diseases

The transdermal permeation of curcumin aided by choline and geranic acid ionic liquid (CAGE-IL) was addressed as a potential treatment for skin diseases. An in-depth analysis of the effect of CAGE-IL concentration in the enhancement of transdermal permeation of curcumin was performed, and the results were modelled via nonlinear regression analysis. The results obtained showed that a low percentage of CAGE-IL (viz. 2.0%, w/w) was effective in disrupting the skin structure in a transient fashion, facilitating the passage of curcumin dissolved in it.

New, Biocompatible, Chitosan-Gelled Microemulsions Based on Essential Oils and Sucrose Esters as Nanocarriers for Topical Delivery of Fluconazole

Biocompatible gel microemulsions containing natural origin excipients are promising nanocarrier systems for the safe and effective topical application of hydrophobic drugs, including antifungals. Recently, to improve fluconazole skin permeation, tolerability and therapeutic efficacy, we developed topical biocompatible microemulsions based on cinnamon, oregano or clove essential oil (CIN, ORG or CLV) as the oil phase and sucrose laurate (D1216) or sucrose palmitate (D1616) as surfactants, excipients also possessing intrinsic antifungal activity. To follow up this research, this study aimed to improve the adhesiveness of respective fluconazole microemulsions using chitosan (a biopolymer with intrinsic antifungal activity) as gellator and to evaluate the formulation variables' effect (composition and concentration of essential oil, sucrose ester structure) on the gel microemulsions' (MEGELs) properties. All MEGELs were evaluated for drug content, pH, rheological behavior, viscosity, spreadability, in vitro drug release and skin permeation and antifungal activity. The results showed that formulation variables determined distinctive changes in the MEGELs' properties, which were nevertheless in accordance with official requirements for semisolid preparations. The highest flux and release rate values and large diameters of the fungal growth inhibition zone were produced by formulations MEGEL-FZ-D1616-CIN 10%, MEGEL-FZ-D1216-CIN 10% and MEGEL-FZ-D1616-ORG 10%. In conclusion, these MEGELs were demonstrated to be effective platforms for fluconazole topical delivery.

Development of novel biopolymer-based nanoparticles loaded cream for potential treatment of topical fungal infections

OBJECTIVE

Biodegradable polymers are extensively used due to their efficient safety profiles. The aim of the current study was to fabricate, evaluate, and characterize biodegradable, biocompatible fluconazole (FLZ) loaded chitosan (CHS) chondroitin sulfate (CS) nanoparticles (NPs) for topical delivery. Polymers utilized in the formulation not only served as a carrier system but also aided in fighting with complex etiology of the disease due to their innate antifungal activities.

METHODS

NPs were prepared by the complex coacervation method, then were optimized for various parameters and subsequently loaded into a cream.

RESULTS

Scanning electron microscopic (SEM) analysis showed spherical morphology of the NPs. Prepared NPs showed an average particle size in the range of 350-450 nm and an encapsulation efficiency (EE) of 86%. The polydispersity index (PDI) was found to be 0.148 that showed a uniform distribution of NPs. Fourier transform infrared (FTIR) spectroscopy confirmed the absence of any electrostatic interaction between ingredients. In vitro drug release analyses exhibited a sustained release of the drug and higher antifungal activity than free FLZ. Ex vivo permeability and drug distribution in different skin layers ensured a site-specific delivery of the FLZ-NPs. As compared with free FLZ and other control groups, the prepared NPs also exhibited significantly higher antifungal activity against Candida albicans (p < .01).

CONCLUSION

It was concluded from the results that the FLZ-NPs laden cream could be a potential candidate for topical and site-specific delivery of the drug cargo for the potential treatment of fungal infections.

Effect of nanostructured lipid carriers on transdermal delivery of tenoxicam in irradiated rats

Transdermal delivery of non-steroidal anti-inflammatory drugs (NSAIDs) is an effective route of drug administration, as it directs the drug to the inflamed site with reduced incidence of systemic adverse effects such as gastric hemorrhage and ulcers. Tenoxicam (TNX) is a member of NSAIDs that are marketed only as oral tablets due to very poor absorption through the skin. The current study intended to formulate and characterize a hydrogel loaded with nanostructured lipid carriers (NLCs) to enhance the transdermal delivery of TNX. Six formulations of TNX were formulated by slight modifications of high shear homogenization and ultrasonication method. The selected formula was characterized for their particle size, polydispersity index (PDI), zeta potential, entrapment efficiency (EE), in-vitro drug release and ex-vivo skin permeation studies. Moreover, the effectiveness of the developed formula was studied in-vivo using carrageenan-induced paw edema and hyperalgesia model in irradiated rats. Formula F4 was chosen from six formulations, as the average diameter was 679.4 ± 51.3 nm, PDI value of about 0.02, zeta potential of -4.24 mV, EE of 92.36%, globules nanoparticles without aggregations and absence of interactions in the developed formula. Additionally, the in-vivo study showed the efficacy of formula F4 (TNX-NLCs hydrogel) equivalent to oral TNX in reducing the exaggerated inflammatory response induced by carrageenan after irradiation. In conclusion, the present findings suggest that TNX-NLCs hydrogel could be a potential transdermal drug delivery system alternative to the oral formulation for the treatment of various inflammatory conditions.

Performance of Choline Geranate Deep Eutectic Solvent as Transdermal Permeation Enhancer: An In Vitro Skin Histological Study

In the present research work, we addressed the changes in skin by which deep eutectic solvents (DES) enhanced transdermal permeation of bioactive compounds and propose a rationale for this mechanism. Several studies showed that these unusual liquids were ideal solvents for transdermal delivery of biomolecules, but to date, no histological studies relating the action of DES to changes in the structure of the outer skin barrier have been reported. In the research effort described herein, we presented an in-depth analysis of the changes induced in the skin by choline geranate DES, a compound with proven capabilities of enhancing transdermal permeation without deleterious impacts on the cells. The results obtained showed that a low percentage of DES acted as a transient disruptor of the skin structure, facilitating the passage of bioactive compounds dissolved in it.

Alleviating neuropathy of diabetic foot ulcer by co-delivery of venlafaxine and matrix metalloproteinase drug-loaded cellulose nanofiber sheets: production, in vitro characterization and clinical trial

BACKGROUND

The objective of the present study was co-delivery of venlafaxin (VEN) and doxycycline (DOX), a matrix metalloproteinase inhibitor drug, for alleviating inflammation and neuropathy in diabetic foot ulcer (DFU).

METHODS

Bacterial cellulose nanofiber sheets (BCNS) were loaded with DOX and VEN and categorized by their loading efficiency, release profiles and ex vivo permeation throughrat skin. The optimized nanofibers were used in patients with DFU to compare with the standard wound care regimen during a 12-week trial. Wound area was measured every 2 weeks. Biochemical parameters and microscopic studies of the skin were examined prior and at the end of the treatment. The Michigan Neuropathy Screening Instrument (MNSI) questionnaire was utilized to assess diabetic neuropathy.

RESULTS

The optimum formulation showed loading efficiency of 37.8 ± 1.6% for DOX and 48 ± 1.9% for VEN. Rat skin permeation was 40% for DOX after 7-29 h and 83% for VEN during 105 h. Patients treated with BCNS showed no significant difference in their biochemical parameters before and after intervention. The ulcer size showed faster reduction after 12 weeks in the treatment group compared to the control group. The abnormal responses in the MNSI questionnaire decreased and pain-free walking distance increased significantly in the treatment group compared with the control group (p < 0.001). Microscopic studies of the skin after using nanofibers showed a large number of polymorphonuclear chronic inflammatory cells and formation of new capillary beds.

CONCLUSIONS

The BCNS loaded with DOX and VEN may expedite healing and reduce neuropathy in the DFU of diabetic patients.

Transdermal Permeation of Caffeine Aided by Ionic Liquids: Potential for Enhanced Treatment of Cellulitis

Ginoid hydrolipodystrophy (HDLG) or "cellulite" involves alteration of the cutaneous relief and occurs in 80-90% of the female population. Several topical treatments are available with the use of substances capable of stimulating lipolysis, such as caffeine. However, the effectiveness of topical therapy is related to the processes of release and permeation of the active in skin cells. In this sense, ionic liquids, such as choline geranate, are considered to facilitate topical permeation agents. In this way, the aim of this research was to develop and evaluation of the effectiveness of a cosmetic product for topical treatment of cellulite with caffeine in association with choline geranate. The choline geranate was synthesized by the reaction between geranic acid and choline hydroxide [1: 2]. The gel was prepared using 2% Carpobol 940®, 5% caffeine, and 1% choline geranate. Preliminary and accelerated stability tests were performed by checking pH, spreadability, and organoleptic characteristics. The transdermal permeation capacity of caffeine in vitro was evaluated by the Franz cell permeation assay, and the gel cytotoxicity by the MTS method. To prove the efficacy in the treatment of cellulite, a pilot type 1 clinical trial was carried out. The formulation was considered stable and the product maintained your characteristics during 180 days of storage. The product showed moderate cytotoxicity and high skin permeation capacity. In the clinical trial, it showed results superior to the caffeine gel without ionic liquid. The developed gel favored the cutaneous permeation of caffeine, showing a promising product in the treatment of cellulite.

Synergic effects of ultrasound and ionic liquids on fluconazole emulsion

The aim of this work was to evaluate the influence of US on the properties of the fluconazole emulsions prepared using imidazolium-based ILs ([C_n C₁im]Br). The effects of the preparation method (mechanical stirring or US), US amplitude, alkyl chain length (of [C₁₂C₁im]Br or [C₁₆C₁im]Br), and IL concentration on the physicochemical properties were evaluated. Properties such as droplet size, span index, morphology, viscosity encapsulation efficiency, and drug release profile were determined. The results showed that US-prepared emulsions had a smaller droplet size and smaller polydispersity (Span) than those prepared by mechanical stirring. Additionally, the results showed that emulsions prepared with [C₁₆C₁im]Br and US had spherical shapes and increased stability compared to emulsions prepared by MS, and also depended on the IL concentration. The emulsion prepared by US at 40% amplitude had increased encapsulation efficiency. US provided a decrease in the viscosity of emulsions containing [C₁₂C₁im]Br; however, in general, all emulsions had viscosity close to that of water. Emulsions containing [C₁₆C₁im]Br had the lowest viscosities of all the emulsions. The emulsions containing the IL [C₁₆C₁im]Br had more controlled release and a lower cumulative percentage of drug release. The IL concentration required to prepare these emulsions was lower than the amount of conventional surfactant required, which highlights the potential synergic effects of ILs and US in preparing emulsions of hydrophobic drugs.

Novel drug-loaded film forming patch based on gelatin and snail slime

Gelatin-based films enriched with snail slime are proposed as novel biodegradable and naturally bioadhesive patches for cutaneous drug delivery. Films (thickness range 163-248 μm) were stretchable and they adhered firmly onto the wetted skin, especially those with high amount (70% V/V) of snail slime extract. Fluconazole was selected as model drug and added to films containing the highest amount of snail slime. The presence of Fluconazole (4.53 ± 0.07% w/w) did not modify significantly the mechanical properties, the swelling degree and the bioadhesive performances of the films. Structural investigations demonstrated that the crystalline form III of the drug changed to the amorphous one, forming an amorphous solid dispersion. Moreover, snail slime prevented the drug recrystallization over time. In vitro permeation studies showed that film exhibited a cumulative drug concentration (over 60% in 24 h) similar to that of the control solution containing 20% w/V of ethanol. Fluconazole-loaded gelatin films proved to be effective towards clinical isolates of Candida spp. indicating that the drug maintained its remarkable antifungal activity once formulated into gelatin and snail slime-based films. In conclusion, snail slime, thanks to its peculiar composition, has proved to be responsible of optimal skin adhesion, film flexibility and of the formation of a supersaturating drug delivery system able to increase skin permeation.

Topical Biocompatible Fluconazole-Loaded Microemulsions Based on Essential Oils and Sucrose Esters: Formulation Design Based on Pseudo-Ternary Phase Diagrams and Physicochemical Characterization

To initiate our research into the development of biocompatiîle gelled-microemulsions based on essential oils (EOs) and sucrose esters (SEs) for the topical delivery of fluconazole, this formulation study investigated the usefulness of two relatively harmless natural non-ionic surfactants from the group of SEs (sucrose laurate and stearate) to form, in the presence of antifungal EOs, stable, isotropic microemulsions effective on fluconazole solubilization. Fluconazole’s solubility in EO significantly depended on their chemical composition, showing higher values for cinnamon, oregano and clove essential oils, further selected as oil phase components for microemulsion formulations. The phase behavior of several EO–isopropyl miristate/SE–isopropanol/water systems was assessed through pseudo-ternary phase diagrams constructed by microplate dilution technique. The hydrocarbon chain length of the SE and EO type strongly influenced the size of the microemulsion region in the pseudo-ternary phase diagrams. Ten microemulsion formulations containing 2% fluconazole, 6% or 10% oil mixture of EO–isopropyl myristate in 1:1 ratio, 45% SE-isopropanol mixture and water, were selected and evaluated for physicochemical properties (droplet size, polydispersity, viscosity, refractive index, zeta potential and pH). All formulations were physicochemically acceptable, but viscosity enhancement and further in vitro and in vivo tests are required for the development of biocompatible, clinically safe and effective fluconazole topical preparations.

Newly isolated lytic bacteriophages for Staphylococcus intermedius, structurally and functionally stabilized in a hydroxyethylcellulose gel containing choline geranate: Potential for transdermal permeation in veterinary phage therapy

In the present research work, we propose a new antimicrobial treatment for pyoderma via cutaneous permeation of bacteriophage particles conveyed in a hydroxyethylcellulose (HEC) gel integrating ionic liquid as a permeation enhancer. Ionic liquids are highly viscous fluids constituted exclusively by ions, that are usually hydrolytically stable and promote solubilization of amphipathic molecules such as proteins, hence serving as green solvents and promoting the transdermal permeation of biomolecules. In the research effort entertained herein, the synthesis and use of choline geranate for integrating a HEC gel aiming at the structural and functional stabilization of a cocktail of isolated lytic bacteriophage particles was sought, aiming at transdermal permeation in the antimicrobial treatment of animal pyoderma. The results obtained showed a high ability of the ionic liquid in enhancing transdermal permeation of the bacteriophage particles, with concomitant high potential of the HEC gel formulation in the antimicrobial treatment of animal skin infections.

Combatting fungal biofilm formation by diffusive release of fluconazole from heptylamine plasma polymer coating

A drug-eluting coating applied onto biomedical devices and implants is an appropriate way to ensure that an inhibitory concentration of antimicrobial drugs is present at the device surface, thus preventing surface colonization and subsequent biofilm formation. In this study, a thin polymer coating was applied to materials, and it acted as a drug-delivery reservoir capable of surface delivery of the antifungal drug fluconazole to amounts up to 21 μg/cm². The release kinetics into aqueous solution were quantified by UV spectroscopy and conformed to the Ritger-Peppas and Korsmeyer-Peppas model. Complementary microbiological assays were used to determine effectiveness against Candida albicans attachment and biofilm formation, and against the control heptylamine plasma polymer coating without drug loading, on which substantial fungal growth occurred. Fluconazole release led to marked antifungal activity in all assays, with log 1.6 reduction in CFUs/cm². Cell viability assays and microscopy revealed that fungal cells attached to the fluconazole-loaded coating remained rounded and did not form hyphae and biofilm. Thus, in vitro screening results for fluconazole-releasing surface coatings showed efficacy in the prevention of the formation of Candida albicans biofilm.

Cellulose-Based Hydrogels as Sustained Drug-Delivery Systems

Hydrogels, three-dimensional (3D) polymer networks, present unique properties, like biocompatibility, biodegradability, tunable mechanical properties, sensitivity to various stimuli, the capacity to encapsulate different therapeutic agents, and the ability of controlled release of the drugs. All these characteristics make hydrogels important candidates for diverse biomedical applications, one of them being drug delivery. The recent achievements of hydrogels as safe transport systems, with desired therapeutic effects and with minimum side effects, brought outstanding improvements in this area. Moreover, results from the utilization of hydrogels as target therapy strategies obtained in clinical trials are very encouraging for future applications. In this regard, the review summarizes the general concepts related to the types of hydrogel delivery systems, their properties, the main release mechanisms, and the administration pathways at different levels (oral, dermal, ocular, nasal, gastrointestinal tract, vaginal, and cancer therapy). After a general presentation, the review is focused on recent advances in the design, preparation and applications of innovative cellulose-based hydrogels in controlled drug delivery.

Recent advances in topical carriers of anti-fungal agents

Fungal skin infections are the most common global issue for skin health. Fungal infections are often treated by topical or systemic anti-fungal therapy. Topical fungal therapy is usually preferred because of their targeted therapy and fewer side effects. Advanced topical carriers because of their distinct structural and functional features, overcome biopharmaceutical challenges associated with conventional drug delivery systems like poor retention and low bioavailability. Literature evidence indicated topical nanocarriers loaded with anti-fungal agents display superior therapeutic response with minimum toxicity. Nanocarriers often used for topical anti-fungal medication includes Solid-Lipid nanoparticles, Microemulsions, Liposomes, Niosomes, Microsponge, Nanogel, Nanoemulsion, Micelles etc. This review summarizes recent advances in novel strategies employed in topical carriers to improve the therapeutic performance of anti-fungal drugs.

Development of nanoemulsion gel drug delivery systems of cetirizine; factorial optimisation of composition, in vitro evaluation and clinical study

Aim: This work aimed to develop topical nanoemulsion gels of cetirizine, a second-generation antihistamine, to avoid its oral intake drawbacks and enhance skin permeation.Methods: Cetirizine nanoemulsions were formulated and characterised for their particle size, polydispersity index, zeta potential, drug release and drug permeation through rat skin. The optimised formulation, obtained using 2³ full factorial design, was incorporated in carbopol and chitosan gels and evaluated clinically for urticaria treatment.Results: The optimised formulation had particle size of 32.015 ± 1.87 nm, polydispersity index of 0.29 ± 0.04, zeta potential of -19.31 ± 0.43 mV, cetirizine percent released of 98.50 ± 1.23% and permeability coefficient of 7.65 cm.h^-1. Cetirizine nanoemulsion gels were more effective than their control gels in urticaria treatment with significant decrease in the degree of wheals and itching and higher recovery percent.Conclusion: Cetirizine nanoemulsion topical gels are expected to be a rational and effective tool for avoiding cetirizine oral side effects and targeting the affected skin.

Facilitated Transdermal Drug Delivery Using Nanocarriers-Embedded Electroconductive Hydrogel Coupled with Reverse Electrodialysis-Driven Iontophoresis

We herein developed an iontophoretic transdermal drug delivery system for the effective delivery of electrically mobile drug nanocarriers (DNs). Our system consists of a portable and disposable reverse electrodialysis (RED) battery that generates electric power for iontophoresis through the ionic exchange. In addition, in order to provide a drug reservoir to the RED-driven iontophoretic system, an electroconductive hydrogel composed of polypyrrole-incorporated poly(vinyl alcohol) (PYP) was used. The PYP hydrogel facilitated electron transfer from the RED battery and accelerated the mobility of electrically mobile DNs released from the PYP hydrogel. In this study, we showed that fluconazole- or rosiglitazone-loaded DNs could be functionalized with charge-inducing agents, and DNs with charge modification resulted in facilitated transdermal transport via repulsive RED-driven iontophoresis. In addition, topical application and RED-driven iontophoresis of rosiglitazone-loaded DNs resulted in an effective antiobese condition displaying decreased bodyweight, reduced glucose level, and increased conversion of white adipose tissues to brown adipose tissues in vivo. Consequently, we highlight that this transdermal drug delivery platform would be extensively utilized for delivering diverse therapeutic agents in a noninvasive way.

Non-invasive Transdermal Delivery of Human Insulin Using Ionic Liquids: In vitro Studies

In this research project, synthesis and characterization of ionic liquids and their subsequent utilization as facilitators of transdermal delivery of human insulin was pursued. Choline geranate and choline oleate ionic liquids (and their deep eutectic solvents) were produced and characterized by nuclear magnetic resonance (¹H NMR), water content, oxidative stability, cytotoxicity and genotoxicity assays, and ability to promote transdermal protein permeation. The results gathered clearly suggest that all ionic liquids were able to promote/facilitate transdermal permeation of insulin, although to various extents. In particular, choline geranate 1:2 combined with its virtually nil cyto- and geno-toxicity was chosen to be incorporated in a biopolymeric formulation making it a suitable facilitator aiming at transdermal delivery of insulin.

The role of viscosity on skin penetration from cellulose ether-based hydrogels

Background

The rheological properties of dermal drug delivery systems are of importance when designing new formulations. Viscosity not only affects features such as spreadability and skin feel, but may also affect the skin penetration of incorporated actives. Data on the latter aspect are controversial. Our objective was to elucidate the relation between viscosity and drug delivery performance of different model hydrogels assuming that enhanced microviscosity might delay drug release and penetration.

Materials and Methods

Hydrogels covering a broad viscosity range were prepared by adding either HPMC or HEC as gelling agents in different concentrations. To investigate the ability of the gels to deliver a model drug into the skin, sulphadiazine sodium was incorporated and its in vitro skin penetration was monitored using tape stripping/HPLC analysis and non‐invasive confocal Raman spectroscopy.

Results

The trends observed with the two different experimental setups were comparable. Drug penetration depths decreased slightly with increasing viscosity, suggesting slower drug release due to the increasingly dense gel networks. However, the total penetrated drug amounts were independent of the exact formulation viscosity.

Conclusion

Drug penetration was largely unaffected by hydrogel viscosity. Moderately enhanced viscosity is advisable when designing cellulose ether hydrogels to allow for convenient application.

A new formulation of graphene oxide/fluconazole compound as a promising agent against Candida albicans

Candida albicans (C. albicans) belongs to the opportunistic fungal pathogens, which cause a wide spectrum of infections in immune-compromised patients. Graphene oxide (GO), a biocompatibility agent, has been reported to exhibit effective antimicrobial activity. In the present study, a graphene oxide/fluconazole (GO/Flu) compound was synthesized and characterized using Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. The antifungal activity of GO/Flu was examined against fluconazole-resistant C. albicans (ATCC 10231) compared to GO and Flu using the broth microdilution method, according to CLSI protocol. DNA fragmentation was assessed through the antifungal mechanism of GO/Flu. The release of Fluin PBS medium was measured. Moreover, the cytotoxicity effect of GO/Flu on SW480 cell line was evaluated. Indeed, adhesion ability of C. albicans-treated GO/Flu against SW480 cell line was assessed. The minimum inhibitory concentration (MIC) of GO, Flu, and GO/Flu was determined at 800 µg/mL, 16 µg/mL, and 400-9 µg/mL, respectively. Notably, GO/Flu exhibited an intense antifungal activity compared to GO and Flu. In addition, GO/Flu showed much less cell toxicity against SW480 cell line than GO and Flu (P < 0.05). The release determination of Flu in PBS (pH 7.4) medium was 72.42%. GO/Flu reduced the adhesion ability of C. albicans to SW480 cell line significantly. DNA fragmentation assay indicated that GO/Flu potentially degraded the DNA of C. albicans and caused a fungicidal influence. According to the findings, GO/Flu could enhance the antifungal activity against C.albicans through DNA fragmentation with low cytotoxicity effect.

In vitro cytotoxicity and anticancer effects of citral nanostructured lipid carrier on MDA MBA-231 human breast cancer cells

Very recently, we postulated that the incorporation of citral into nanostructured lipid carrier (NLC-Citral) improves solubility and delivery of the citral without toxic effects in vivo. Thus, the objective of this study is to evaluate anti-cancer effects of NLC-Citral in MDA MB-231 cells in vitro through the Annexin V, cell cycle, JC-1 and fluorometric assays. Additionally, this study is aimed to effects of NLC-Citral in reducing the tumor weight and size in 4T1 induced murine breast cancer model. Results showed that NLC-Citral induced apoptosis and G2/M arrest in MDA MB-231 cells. Furthermore, a prominent anti-metastatic ability of NLC-Citral was demonstrated in vitro using scratch, migration and invasion assays. A significant reduction of migrated and invaded cells was observed in the NLC-Citral treated MDA MB-231 cells. To further evaluate the apoptotic and anti-metastatic mechanism of NLC-Citral at the molecular level, microarray-based gene expression and proteomic profiling were conducted. Based on the result obtained, NLC-Citral was found to regulate several important signaling pathways related to cancer development such as apoptosis, cell cycle, and metastasis signaling pathways. Additionally, gene expression analysis was validated through the targeted RNA sequencing and real-time polymerase chain reaction. In conclusion, the NLC-Citral inhibited the proliferation of breast cancer cells in vitro, majorly through the induction of apoptosis, anti-metastasis, anti-angiogenesis potentials, and reducing the tumor weight and size without altering the therapeutic effects of citral.

Microemulsion and Microporation Effects on the Genistein Permeation Across Dermatomed Human Skin

This study reports the microemulsion (ME) effects on the permeation of genistein across normal (intact) and microporated human skin. The genistein formulation was optimized to know the stable ME region in the pseudo-ternary phase diagrams and to maximize the skin permeation and retention of genistein. The phase diagrams were constructed with different oil phases, surfactants, and their combinations. The influence of formulation factors on the permeation through intact and microporated human skin was determined. Based on its wide ME region, as well as permeation enhancement effects, oleic acid was used as an oil phase with various surfactants and co-surfactants to further maximize the ME region and skin permeation. The water content in the formulation played an important role in the ME stability, droplet size, and flux of genistein. For example, the ME with 20% water exhibited 4- and 9-fold higher flux as compared to the ME base (no water) and aqueous suspension, respectively. Likewise, this formulation had demonstrated 2- and 4-fold higher skin retention as compared to the ME base (no water) and aqueous suspension, respectively. The skin microporation did not significantly increase the skin permeation of genistein from ME formulations. The ME composition, water content, and to a lesser extent the ME particle size played a role in improving the skin permeation and retention of genistein.

Development of a Topical 48-H Release Formulation as an Anti-scarring Treatment for Deep Partial-Thickness Burns

The purpose of this study was to develop pirfenidone (PF) ointment formulations for a dose finding study in the prophylactic treatment of deep partial-thickness burns in a mouse model. A preformulation study was performed to evaluate the solubility of PF in buffers and different solvents and its stability. Three different formulations containing 1, 3.5, and 6.5% w/w PF were prepared and optimized for their composition for testing in mice. Optimized formulations showed promising in vitro release profiles, in which 20-45% of PF was released in the first 7 h and 70-90% released within 48 h. The rheological properties of the ointment remained stable throughout storage at 25 ± 2°C/60% RH. Animal studies showed treatments of burn wounds during the inflammatory stage of wound healing with PF ointments at different drug concentrations had no adverse effects on reepithelization. Moreover, 6.5% PF ointment (F3) reduced the expression of pro-inflammatory cytokines IL-12p70 and TNFα. This study suggests that hydrocarbon base ointment could be a promising dosage form for topical delivery of PF in treatment of deep partial-thickness burns.

Antifungal activity of fluconazole-loaded natural rubber latex against Candida albicans

Aim: This work aimed to produce a membrane based on fluconazole-loaded natural rubber latex (NRL), and study their interaction, drug release and antifungal susceptibility against Candida albicans. Materials & methods: Fluconazole-loaded NRL membrane was obtained by casting method. Results: The Fourier Transform Infrared Spectroscopy showed no modifications either in NRL or fluconazole after the incorporation. Mechanical test presented low Young's modulus and high strain, indicating the membranes have sufficient elasticity for biomedical application. The bio-membrane was able to release the drug and inhibit the growth of C. albicans as demonstrated by disk diffusion and macrodilution assays. Conclusion: The biomembrane was able to release fluconazole and inhibit the growth of C. albicans, representing a promising biomaterial for skin application.

Characterization and toxicity of citral incorporated with nanostructured lipid carrier

The nanoparticle as a cancer drug delivery vehicle is rapidly under investigation due to its promising applicability as a novel drug delivery system for anticancer agents. This study describes the development, characterization and toxicity studies of a nanostructured lipid carrier (NLC) system for citral. Citral was loaded into the NLC using high pressure homogenization methods. The characterizations of NLC-citral were then determined through various methods. Based on Transmission Electron Microscope (TEM) analysis, NLC-Citral showed a spherical shape with an average diameter size of 54.12 ± 0.30 nm and a polydipersity index of 0.224 ± 0.005. The zeta potential of NLC-Citral was −12.73 ± 0.34 mV with an entrapment efficiency of 98.9 ± 0.124%, and drug loading of 9.84 ± 0.041%. Safety profile of the formulation was examined via in vitro and in vivo routes to study its effects toward normal cells. NLC-Citral exhibited no toxic effects towards the proliferation of mice splenocytes. Moreover, no mortality and toxic signs were observed in the treated groups after 28 days of treatment. There were also no significant alterations in serum biochemical analysis for all treatments. Increase in immunomodulatory effects of treated NLC-Citral and Citral groups was verified from the increase in CD4/CD3 and CD8/CD3 T cell population in both NLC-citral and citral treated splenocytes. This study suggests that NLC is a promising drug delivery system for citral as it has the potential in sustaining drug release without inducing any toxicity.

Novel microemulsion-based gels for topical delivery of indomethacin: Formulation, physicochemical properties and in vitro drug release studies

HYPOTHESIS

Microemulsion-based semisolid systems may be considered as an interesting alternative to the traditional dosage forms applied in topical drug delivery. Mechanical properties of topical products are important both in terms of application and dosage form effectiveness. In this study we designed and evaluated novel microemulsion-based gels with indomethacin and analyzed the factors affecting their mechanical characteristics and drug release.

EXPERIMENTS

The impact of the microemulsion composition on the extent of isotropic region was investigated with the use of pseudoternary phase diagrams. Selected microemulsions were analyzed in terms of electrical conductivity and surface tension in order to determine the microemulsion type. Microemulsions were transformed into polymer-based gels and subjected to rheological and textural studies. Finally, the indomethacin release from the analyzed gels was studied and compared to commercially available product.

FINDINGS

The extent of isotropic domain in pseudoternary phase diagrams seems to be dependent on the polarity of the oil phase. The surface tension and conductivity monitored as a function of water content in microemulsion systems revealed possible structural transformations from w/o through bicontinuous systems into o/w. The mechanical properties of semisolid microemulsion-based systems depended on the composition of surface active agents and the drug presence. The drug release profiles observed in the case of the investigated gels differed from those recorded for the commercially available product which was most probably caused by the different structure of both systems.

Design and Evaluation of Topical Diclofenac Sodium Gel Using Hot Melt Extrusion Technology as a Continuous Manufacturing Process with Kolliphor® P407

The aim of the present context was to develop and evaluate a Kolliphor® P407-based transdermal gel formulation of diclofenac sodium by hot melt extrusion (HME) technology; central composite design was used to optimize the formulation process. In this study, we have explored first time ever HME as an industrially feasible and continuous manufacturing technology for the manufacturing of gel formulation using Kolliphor® P407 and Kollisolv® PEG400 as a gel base. Diclofenac sodium was used as a model drug. The HME parameters such as feeding rate, screw speed, and barrel temperature were crucial for the semisolid product development, and were optimized after preliminary trials. For the processing of the gel formulation by HME, a modified screw design was used to obtain a uniform product. The obtained product was evaluated for physicochemical characterization such as differential scanning calorimetry (DSC), X-ray diffraction (XRD), pH measurement, rheology, surface tension, and texture profile analysis. Moreover, it was analyzed for general appearance, spreadibility, surface morphology, and drug content. The optimized gel formulation showed homogeneity and transparent film when applied on a glass slide under microscope, pH was 7.02 and uniform drug content of 100.04 ± 2.74 (SD = 3). The DSC and XRD analysis of the HME gel formulation showed complete melting of crystalline API into an amorphous form. The Kolliphor® P407 and Kollisolv® PEG400 formed excellent gel formulation using HME with consistent viscoelastic properties of the product. An improved drug release was found for the HME gel, which showed a 100% drug release than that of a marketed product which showed only 88% of drug release at the end of 12 h. The Flux value of the HME gel was 106 than that of a marketed formulation, which showed only about 60 value, inferring a significant difference (P < 0.05) at the end of 1 h. This study demonstrates a novel application of the hot melt extrusion process for manufacturing of topical semisolid products.

Preparation of active 3D film patches via aligned fiber electrohydrodynamic (EHD) printing

The design, preparation and application of three-dimensional (3D) printed structures have gained appreciable interest in recent times, particularly for drug dosage development. In this study, the electrohydrodynamic (EHD) printing technique was developed to fabricate aligned-fiber antibiotic (tetracycline hydrochloride, TE-HCL) patches using polycaprolactone (PCL), polyvinyl pyrrolidone (PVP) and their composite system (PVP-PCL). Drug loaded 3D patches possessed perfectly aligned fibers giving rise to fibrous strut orientation, variable inter-strut pore size and controlled film width (via layering). The effect of operating parameters on fiber deposition and alignment were explored, and the impact of the film structure, composition and drug loading was evaluated. FTIR demonstrated successful TE-HCL encapsulation in aligned fibers. Patches prepared using PVP and TE-HCL displayed enhanced hydrophobicity. Tensile tests exhibited changes to mechanical properties arising from additive effects. Release of antibiotic from PCL-PVP dosage forms was shown over 5 days and was slower compared to pure PCL or PVP. The printed patch void size also influenced antibiotic release behavior. The EHDA printing technique provides an exciting opportunity to tailor dosage forms in a single-step with minimal excipients and operations. These developments are crucial to meet demands where dosage forms cannot be manufactured rapidly or when a personalized approach is required.

Carbon nanotube membranes to predict skin permeability of compounds

In the present study, carbon nanotube (CNT) membranes were prepared to predict skin penetration properties of compounds. A series of penetration experiments using Franz diffusion cells were performed with 16 different membrane compositions for model chemicals. Similar experiments were also carried out with same model molecules using five different commercially available synthetic membranes and human skins for the comparison. Model chemicals were selected as diclofenac, dexketoprofen and salicylic acid. Their permeability coefficients and flux values were calculated. Correlations between permeability values of model compounds for human skins and developed model membranes were investigated. Good correlations were obtained for CNT membrane, isopropyl myristate-treated CNT membrane (IM-CNT membrane) and bovine serum albumin-cholesterol, dipalmitoyl phosphatidyl choline-treated membrane (BSA-Cholesterol-DPPC-IM-CNT membrane). An artificial neural network (ANN) model was developed using some molecular properties and penetration coefficients from pristine CNT membranes to predict skin permeability values and quite good predictions were made.

Quantitative structure-permeability relationships at various pH values for acidic and basic drugs and drug-like compounds

Absorption in gastrointestinal tract compartments varies and is largely influenced by pH. Therefore, considering pH in studies and analyses of membrane permeability provides an opportunity to gain a better understanding of the behaviour of compounds and to obtain good permeability estimates for prediction purposes. This study concentrates on relationships between the chemical structure and membrane permeability of acidic and basic drugs and drug-like compounds. The membrane permeability of 36 acidic and 61 basic compounds was measured using the parallel artificial membrane permeability assay (PAMPA) at pH 3, 5, 7.4 and 9. Descriptive and/or predictive single-parameter quantitative structure-permeability relationships were derived for all pH values. For acidic compounds, membrane permeability is mainly influenced by hydrogen bond donor properties, as revealed by models with r(2) > 0.8 for pH 3 and pH 5. For basic compounds, the best (r(2) > 0.7) structure-permeability relationships are obtained with the octanol-water distribution coefficient for pH 7.4 and pH 9, indicating the importance of partition properties. In addition to the validation set, the prediction quality of the developed models was tested with folic acid and astemizole, showing good matches between experimental and calculated membrane permeabilities at key pHs. Selected QSAR models are available at the QsarDB repository ( http://dx.doi.org/10.15152/QDB.166 ).

Development and evaluation of new microemulsion-based hydrogel formulations for topical delivery of fluconazole

The aim of the present investigation was to develop and evaluate microemulsion-loaded hydrogels (MEHs) for the topical delivery of fluconazole (FZ). The solubility of FZ in oils, surfactants and cosurfactants was evaluated to identify the components of the microemulsion. The pseudo-ternary phase diagrams were constructed using the novel phase diagram by micro-plate dilution method. Carbopol EDT 2020 was used to convert FZ-loaded microemulsions into gel form without affecting their structure. The selected microemulsions were assessed for globule size, zeta potential and polidispersity index. Besides this, the microemulsion-loaded hydrogel (MEH) formulations were evaluated for drug content, pH, rheological properties and in vitro drug release through synthetic membrane and excised pig ear skin in comparison with a conventional hydrogel. The optimised MEH FZ formulations consisting of FZ 2%, Transcutol P 11.5% and 11%, respectively, as oil phase, Lansurf SML 20-propyleneglycol 52% and 50%, respectively, as surfactant-cosurfactant (2:1), Carbopol EDT 2020 1.5% as gelling agent and water 34.5% and 37%, respectively, showed highest flux values and high release rate values, and furthermore, they had low surfactant content. The in vitro FZ permeation through synthetic membrane and excised pig ear skin from the studied MEHs was best described by the zero-order and first-order models. Finally, the optimised MEH FZ formulations showed similar or slightly higher antifungal activity as compared to that of conventional hydrogel and Nizoral® cream, respectively. The results suggest the potential use of developed MEHs as vehicles for topical delivery of FZ, encouraging further in vitro and in vivo evaluation.

Development, characterization, and in vitro biological performance of fluconazole-loaded microemulsions for the topical treatment of cutaneous leishmaniasis

Cutaneous leishmaniasis (CL) is a resistant form of leishmaniasis that is caused by a parasite belonging to the genus Leishmania. FLU-loaded microemulsions (MEs) were developed by phase diagram for topical administration of fluconazole (FLU) as prominent alternative to combat CL. Three MEs called F1, F2, and F3 (F1—60% 50 M phosphate buffer at pH 7.4 (PB) as aqueous phase, 10% cholesterol (CHO) as oil phase, and 30% soy phosphatidylcholine/oil polyoxyl-60 hydrogenated castor oil/sodium oleate (3/8/6) (S) as surfactant; F2—50% PB, 10% CHO, and 40% S; F3—40% PB, 10% CHO, and 50 % S) were characterized by droplet size analysis, zeta potential analysis, X-ray diffraction, continuous flow, texture profile analysis, and in vitro bioadhesion. MEs presented pseudoplastic flow and thixotropy was dependent on surfactant concentration. Droplet size was not affected by FLU. FLU-loaded MEs improved the FLU safety profile that was evaluated using red cell haemolysis and in vitro cytotoxicity assays with J-774 mouse macrophages. FLU-unloaded MEs did not exhibit leishmanicidal activity that was performed using MTT colourimetric assays; however, FLU-loaded MEs exhibited activity. Therefore, these MEs have potential to modulate FLU action, being a promising platform for drug delivery systems to treat CL.

Liposomes for (trans)dermal drug delivery: the skin-PVPA as a novel in vitro stratum corneum model in formulation development

Penetration potential of vesicles destined for trans(dermal) administration remains to be of great interests both in respect to drug therapy and cosmetic treatment. This study investigated the applicability of the phospholipid vesicle-based permeation assay (PVPA) as a novel in vitro skin barrier model for screening purposes in preformulation studies. Various classes of liposomes containing hydrophilic model drug were examined, including conventional liposomes (CLs), deformable liposomes (DLs) and propylene glycol liposomes (PGLs). The size, surface charge, membrane deformability and entrapment efficiency were found to be affected by the vesicle lipid concentration, the presence of the surfactant and propylene glycol. All liposomes exhibited prolonged drug release profiles with an initial burst effect followed by a slower release phase. The permeation of the drug from all of the tested liposomes, as assessed with the mimicked stratum corneum--PVPA model, was significantly enhanced as compared to the permeability of the drug in solution form. Although the DLs and the PGLs exhibited almost the same membrane elasticity, the permeability of the drug delivered by PGLs was higher (6.2 × 10⁻⁶ cm/s) than DLs (5.5 × 10⁻⁶ cm/s). Therefore, this study confirmed both the potential of liposomes as vesicles in trans(dermal) delivery and potential of the newly developed skin-PVPA for the screening and optimization of liposomes at the early preformulation stage.

A comparative study on long-term MTX controlled release from intercalated nanocomposites for nanomedicine applications

The feasibility of some mesoporous materials such as SBA-15 and MCM-41 silica, LDH (layered double hydroxide) (Mg3Al-NO3) and MC (mesoporous carbon) have been comparatively evaluated for oral drug delivery applications, in order to broaden the range of matrices and implicitly to develop the class of drug delivery systems based on diffusion mechanism. As well known, methotrexate (MTX) is used widely to treat various neoplastic diseases such as acute lymphoblast leukemia, lymphoma and solid cancers and autoimmune diseases such as psoriasis and rheumatoid arthritis. The commercially available formulations of this drug have disadvantages due to the traditional release process that occurs in the body. Thus, this work is focused on the long-term controlled MTX delivery because this one could eliminate over or underdosing, could maintain drug levels in desired range, could increase patient compliance and prevent the side effects. Therefore, the mesoporous materials are used and efficient MTX-delivery systems, based on above-mentioned mesoporous materials, are successfully prepared by intercalation. The obtained drug carriers were tested in the controlled MTX-drug release process and the influence of the pore morphology and geometry on MTX release profiles was extensively studied comparatively. The prepared MTX delivery systems were characterized by FTIR and UV-vis spectroscopy, N2 sorption measurements. Then, the data obtained from the in vitro release studies have been analyzed, and in order to evaluate the MTX-release mechanism and kinetics, the Korsmeyer-Peppas equation has been applied.