Design of Magnetic Polymeric Particles as a Stimulus-Responsive System for Gastric Antimicrobial Therapy

Gastroretentive drug delivery systems: A holy grail in oral delivery

Gastroretentive drug delivery systems (GRDDSs) offer a promising strategy for enhancing oral drug bioavailability by prolonging gastric residence time and enabling site-specific drug release. This review examines the key materials used in GRDDSs, including polymers for controlled drug release, gas-generating agents for buoyancy, and mucoadhesive components for improved retention and stability. Advances in fabrication techniques, such as 3D printing, spray drying, and nanoparticle encapsulation, have enabled precise modulation of drug release kinetics and retention properties. However, challenges such as inter-subject variability, physiological constraints, and manufacturing scalability remain. Future research will focus on smart materials, multi-drug platforms, and expanding applications to biologics and nutraceuticals, paving the way for more effective and patient-compliant oral drug delivery systems.

Stimulus-responsive biomaterials for Helicobacter pylori eradication

BACKGROUND

Helicobacter pylori (H. pylori), the only bacterium classified as a type I (definite) carcinogen, is strongly associated with the development of gastric inflammation and adenocarcinoma. It infects the stomach of approximately half of the global population, equivalent to nearly 4.4 billion people. However, due to physiological barriers in the stomach, microbial barriers and increased antibiotic resistance, the therapeutic efficiency of standard antibiotic therapy is limited and cannot meet the clinical needs in some areas. Combining stimulus-responsive biomaterials with certain stimuli is an emerging antibacterial strategy. Stimulus-responsive biomaterials can respond to chemical, biological or physical cues in the environment with corresponding changes in their own properties and functions, highlighting a more intelligent, targeting and efficient aspect for H. pylori therapy.

AIM OF REVIEW

This review describes the critical obstacles in the current treatment of H. pylori, summarizes the recent advances in stimulus-responsive biomaterials against H. pylori by elucidating their working mechanisms and antibacterial performances under different types of stimuli (pH, enzymes, light, magnetic and ultrasound irradiations), and attempts to analyze the future prospects of such smart biomaterial for H. pylori eradication. Key Scientific Concepts of Review: Any characteristic property or change in the biomilieu at the H. pylori infected site (endogenous stimuli) or specific iatrogenic conditions in vitro (exogenous stimuli) can act as cues to activate or potentiate the antibacterial activity of responsive biomaterials. The responsiveness of these materials to endogenous stimuli enhances antimicrobial targeting, and makes physiological barriers that would otherwise hinder conventional H. pylori therapies a key factor in facilitating antibacterial effects. The responsiveness to exogenous stimuli greatly prolongs the action time of antimicrobial materials and pinpoints the site of infection, thereby reducing toxic side effects. These findings pave the way for the development of more precise and effective anti-H. pylori treatment.

Leading Paediatric Infectious Diseases-Current Trends, Gaps, and Future Prospects in Oral Pharmacotherapeutic Interventions

Paediatric infectious diseases contribute significantly to global health challenges. Conventional therapeutic interventions are not always suitable for children, as they are regularly accompanied with long-standing disadvantages that negatively impact efficacy, thus necessitating the need for effective and child-friendly pharmacotherapeutic interventions. Recent advancements in drug delivery technologies, particularly oral formulations, have shown tremendous progress in enhancing the effectiveness of paediatric medicines. Generally, these delivery methods target, and address challenges associated with palatability, dosing accuracy, stability, bioavailability, patient compliance, and caregiver convenience, which are important factors that can influence successful treatment outcomes in children. Some of the emerging trends include moving away from creating liquid delivery systems to developing oral solid formulations, with the most explored being orodispersible tablets, multiparticulate dosage forms using film-coating technologies, and chewable drug products. Other ongoing innovations include gastro-retentive, 3D-printed, nipple-shield, milk-based, and nanoparticulate (e.g., lipid-, polymeric-based templates) drug delivery systems, possessing the potential to improve therapeutic effectiveness, age appropriateness, pharmacokinetics, and safety profiles as they relate to the paediatric population. This manuscript therefore highlights the evolving landscape of oral pharmacotherapeutic interventions for leading paediatric infectious diseases, crediting the role of innovative drug delivery technologies. By focusing on the current trends, pointing out gaps, and identifying future possibilities, this review aims to contribute towards ongoing efforts directed at improving paediatric health outcomes associated with the management of these infectious ailments through accessible and efficacious drug treatments.

Treatment of H. pylori infection and gastric ulcer: Need for novel Pharmaceutical formulation

Peptic ulcer disease (PUD) is one of the most prevalent gastro intestinal disorder which often leads to painful sores in the stomach lining and intestinal bleeding. Untreated Helicobacter pylori (H. pylori) infection is one of the major reasons for chronic PUD which, if left untreated, may also result in gastric cancer. Treatment of H. pylori is always a challenge to the treating doctor because of the poor bioavailability of the drug at the inner layers of gastric mucosa where the bacteria resides. This results in ineffective therapy and antibiotic resistance. Current treatment regimens available for gastric ulcer and H. pylori infection uses a combination of multiple antimicrobial agents, proton pump inhibitors (PPIs), H2-receptor antagonists, dual therapy, triple therapy, quadruple therapy and sequential therapy. This polypharmacy approach leads to patient noncompliance during long term therapy. Management of H. pylori induced gastric ulcer is a burning issue that necessitates alternative treatment options. Novel formulation strategies such as extended-release gastro retentive drug delivery systems (GRDDS) and nanoformulations have the potential to overcome the current bioavailability challenges. This review discusses the current status of H. pylori treatment, their limitations and the formulation strategies to overcome these shortcomings. Authors propose here an innovative strategy to improve the H. pylori eradication efficiency.

Recent advances in mucus-penetrating nanomedicines for oral treatment of colonic diseases

INTRODUCTION

Oral administration is the most common route for treating colonic diseases that present increased incidences in recent years. Colonic mucus is a critical rate-limiting barrier for the accumulation of oral therapeutics in the colonic tissues. To overcome this obstacle, mucus-penetrating nanotherapeutics have been exploited to increase the accumulated amounts of drugs in the diseased sites and improve their treatment outcomes against colonic diseases.

AREAS COVERED

In this review, we introduce the structure and composition of colonic mucus as well as its impact on the bioavailability of oral drugs. We also introduce various technologies used in the construction of mucus-penetrating nanomedicines (e.g. surface modification of polymers, physical means and biological strategies) and discuss their mechanisms and potential techniques for improving mucus penetration of nanotherapeutics.

EXPERT OPINION

The mucus barrier is often overlooked in oral drug delivery. The weak mucus permeability of conventional medications greatly lowers drug bioavailability. This challenge can be addressed through physical, chemical and biological technologies. In addition to the reported methods, promising approaches may be discovered through interdisciplinary research that further helps enhance the mucus penetration of nanomedicines.

pH and its applications in targeted drug delivery

Physiologic pH is vital for the normal functioning of tissues and varies in different parts of the body. The varying pH of the body has been exploited to design pH-sensitive smart oral, transdermal and vaginal drug delivery systems (DDS). The DDS demonstrated promising results in hard-to-treat diseases such as cancer and Helicobacter pylori infection. In some cases, a change in pH of tissues or body fluids has also been employed as a useful diagnostic biomarker. This paper aims to comprehensively review the development and applications of pH-sensitive DDS as well as recent advances in the field.

Gastroretentive Sustained-Release Tablets Combined with a Solid Self-Micro-Emulsifying Drug Delivery System Adsorbed onto Fujicalin®

Gastroretentive drug delivery systems (GRDDS) get retained in the stomach for a long time, thus facilitating the absorption of drugs in the upper gastrointestinal tract. However, drugs that are difficult to dissolve or unstable in an acidic environment are not suitable for GRDDS. The current study designs GRDDS combined with a self-micro-emulsifying drug delivery system (SMEDDS) for drugs with solubility or stability problems in the stomach. The model drug fenofibrate was formulated into the optimized liquid SMEDDS composed of 50 w/w% Capryol^® PGMC, 40 w/w% Kolliphor^® RH40, and 10 w/w% Transcutol^® HP and solidified through adsorption on several porous adsorbents. In a dissolution medium at pH 1.2, the powdered SMEDDS using Fujicalin^® dissolved quickly and achieved higher drug dissolution than other adsorbents. Based on these results, a gastroretentive bilayer tablet consisting of a drug release layer and a swelling layer was designed. The drug release layer was formulated with the powdered SMEDDS and hydroxypropyl methylcellulose (HPMC) as a release modifier. HPMC was also added to the swelling layer as a water-swellable polymer. The dissolution rate depended on the viscosity of the HPMC in the drug release layer. The time for 90% drug release was extended from 3.7 to 12.0 h by increasing the viscosity grade of HPMC from 0.1 to 100 K. Moreover, the tablet swelled and maintained a size comparable to a human pylorus diameter or more for at least 24 h. This GRDDS could apply to a broader range of drug candidates.

Mushroom-brush transitional conformation of mucus-inert PEG coating improves co-delivery of oral liposome for intestinal metaplasia therapy

The blocking of gastric mucosal intestinal metaplasia (IM) has been considered to be the pivotal method to control the occurrence of gastric cancer. However, there is still a lack of effective therapeutic agent. Here, we developed mucus-penetrating liposome system by covering surface with polyethylene glycol (PEG) chains (hydrophilic and electroneutral mucus-inert material) to co-delivery candidate drugs combination. Then studied the impact on the transmucus performance of different conformations, which were constructed by controlling the density of PEG chains on the surface. The results showed that the particle size of 5%PEG-Lip was less than 120 nm, the polydispersity index was less than 0.3, and the surface potential tended to be neutral. The D value (long chain spacing) of 5% PEG-Lip was 3.25 nm, which was close to the R_F value (diameter of spherical PEG long chain group without external force interference) of 3.44 nm, and the L value (extended length) was slightly larger than 3.44 nm. In this case, PEG showed mushroom-brush transitional conformation on the surface of liposomes. This conformation was not only promoted stable delivery, but also shielded the capture of mucus more favorably, leading to a more unrestricted transportation in mucus. The further in vivo experimental results demonstrated the rapid distribution of liposomes, which gradually appeared both in the superficial and deep glandular of mucosa and gland cells at 1 h and absorbed into the cell cytoplasm at 6 h. The 5% PEG-Lip with the mushroom-brush transitional configuration recalled abnormal organ index and improved inflammation and intestinal metaplasia. The modified PEG conformation assay presented here was more suitable for liposomes. This PEG-modified liposome system has potential of mucus-penetrating and provides a strategy for local treatment of gastric mucosal intestinal metaplasia.

Polymeric Coatings and Antimicrobial Peptides as Efficient Systems for Treating Implantable Medical Devices Associated-Infections

Many infections are associated with the use of implantable medical devices. The excessive utilization of antibiotic treatment has resulted in the development of antimicrobial resistance. Consequently, scientists have recently focused on conceiving new ways for treating infections with a longer duration of action and minimum environmental toxicity. One approach in infection control is based on the development of antimicrobial coatings based on polymers and antimicrobial peptides, also termed as “natural antibiotics”.

Manganese oxide nanomaterials for bacterial infection detection and therapy

Bacterial infection has received substantial attention and poses a serious threat to human health. Although antibiotics can effectively fight against bacterial infection, the occurrence of antibiotic resistance has become increasingly serious in recent years, which tremendously hinders its clinical application. Consequently, it is urgent to explore novel strategies to achieve efficacious treatment of bacterial diagnosis and detection. Manganese dioxide (MnO₂) nanomaterial has been extensively reported in tumor therapy. Nevertheless, there are few antibacterial reviews of MnO₂. Herein, we will discuss the applications of MnO₂ in the detection and treatment of bacterial infection, including photodynamic therapy, immunotherapy, improvement of hypoxia, dual-modal combination therapy, reactive oxygen species scavenging, magnetic resonance imaging, optical application of acoustic imaging, and so forth. This review is expected to provide meaningful guidance on further research of MnO₂ nanomaterial for antibacterial applications.

Physically Switchable Antimicrobial Surfaces and Coatings: General Concept and Recent Achievements

Bacterial environmental colonization and subsequent biofilm formation on surfaces represents a significant and alarming problem in various fields, ranging from contamination of medical devices up to safe food packaging. Therefore, the development of surfaces resistant to bacterial colonization is a challenging and actively solved task. In this field, the current promising direction is the design and creation of nanostructured smart surfaces with on-demand activated amicrobial protection. Various surface activation methods have been described recently. In this review article, we focused on the "physical" activation of nanostructured surfaces. In the first part of the review, we briefly describe the basic principles and common approaches of external stimulus application and surface activation, including the temperature-, light-, electric- or magnetic-field-based surface triggering, as well as mechanically induced surface antimicrobial protection. In the latter part, the recent achievements in the field of smart antimicrobial surfaces with physical activation are discussed, with special attention on multiresponsive or multifunctional physically activated coatings. In particular, we mainly discussed the multistimuli surface triggering, which ensures a better degree of surface properties control, as well as simultaneous utilization of several strategies for surface protection, based on a principally different mechanism of antimicrobial action. We also mentioned several recent trends, including the development of the to-detect and to-kill hybrid approach, which ensures the surface activation in a right place at a right time.

New Smart Antimicrobial Hydrogels, Nanomaterials, and Coatings: Earlier Action, More Specific, Better Dosing?

To fight against antibiotic-resistant bacteria adhering and developing on medical devices, which is a growing problem worldwide, researchers are currently developing new "smart" materials and coatings. They consist in delivery of antimicrobial agents in an intelligent way, i.e., only when bacteria are present. This requires the use of new and sophisticated tools combining antimicrobial agents with lipids or polymers, synthetic and/or natural. In this review, three classes of innovative materials are described: hydrogels, nanomaterials, and thin films. Moreover, smart antibacterial materials can be classified into two groups depending on the origin of the stimulus used: those that respond to a nonbiological stimulus (light, temperature, electric and magnetic fields) and those that respond to a biological stimulus related to the presence of bacteria, such as changes in pH or bacterial enzyme secretion. The bacteria presence can induce a pH change that constitutes a first potential biological trigger allowing the system to become active. A second biological trigger signal consists in enzymes produced by bacteria themselves. A complete panel of recent studies will be given focusing on the design of such innovative smart materials that are sensitive to biological triggers.

Stimuli-Responsive Polymeric Nanocarriers for Drug Delivery, Imaging, and Theragnosis

In the past few decades, polymeric nanocarriers have been recognized as promising tools and have gained attention from researchers for their potential to efficiently deliver bioactive compounds, including drugs, proteins, genes, nucleic acids, etc., in pharmaceutical and biomedical applications. Remarkably, these polymeric nanocarriers could be further modified as stimuli-responsive systems based on the mechanism of triggered release, i.e., response to a specific stimulus, either endogenous (pH, enzymes, temperature, redox values, hypoxia, glucose levels) or exogenous (light, magnetism, ultrasound, electrical pulses) for the effective biodistribution and controlled release of drugs or genes at specific sites. Various nanoparticles (NPs) have been functionalized and used as templates for imaging systems in the form of metallic NPs, dendrimers, polymeric NPs, quantum dots, and liposomes. The use of polymeric nanocarriers for imaging and to deliver active compounds has attracted considerable interest in various cancer therapy fields. So-called smart nanopolymer systems are built to respond to certain stimuli such as temperature, pH, light intensity and wavelength, and electrical, magnetic and ultrasonic fields. Many imaging techniques have been explored including optical imaging, magnetic resonance imaging (MRI), nuclear imaging, ultrasound, photoacoustic imaging (PAI), single photon emission computed tomography (SPECT), and positron emission tomography (PET). This review reports on the most recent developments in imaging methods by analyzing examples of smart nanopolymers that can be imaged using one or more imaging techniques. Unique features, including nontoxicity, water solubility, biocompatibility, and the presence of multiple functional groups, designate polymeric nanocues as attractive nanomedicine candidates. In this context, we summarize various classes of multifunctional, polymeric, nano-sized formulations such as liposomes, micelles, nanogels, and dendrimers.