The effect of freeze-drying with different cryoprotectants and gamma-irradiation sterilization on the characteristics of ciprofloxacin HCl-loaded poly(D,L-lactide-glycolide) nanoparticles

Quality-by-Design Based Development of Doxycycline Hyclate-Loaded Polymeric Microspheres for Prolonged Drug Release

This study explores a novel approach to address the challenges of delivering highly water-soluble drug molecules by employing hydrophobic ion-pairing (HIP) complexes within poly (lactic-co-glycolic acid) (PLGA) microspheres. The HIP complex, formed between doxycycline hyclate (DH) and docusate sodium (DS), renders the drug hydrophobic. The development of the microspheres was done using the QbD approach, namely, Box-Behnken Design (BBD). A comprehensive characterization of the HIP complex confirmed the successful conversion of DH. DH and the HIP complex were effectively loaded into PLGA microspheres using the oil-in-water (O/W) emulsion solvent evaporation method. Results demonstrated significant improvements in percentage entrapment efficiency (% EE) and drug loading (% DL) for DH within the HIP complex-loaded PLGA microspheres compared to DH-loaded microspheres alone. Additionally, the initial burst release of DH reduced to 3% within the initial 15 min, followed by sustained drug release over 8 days. The modified HIP complex strategy offers a promising platform for improving the delivery of highly water-soluble small molecules. It provides high % EE, % DL, minimal initial burst release, and sustained release, thus having the potential to enhance patient compliance and drug delivery efficiency.

Sustainable functionalized chitosan based nano-composites for wound dressings applications: A review

Functionalized chitosan nanocomposites have been studied for wound dressing applications due to their excellent antibacterial and anti-fungal properties. Polysaccharides show excellent antibacterial and drug-release properties and can be utilized for wound healing. In this article, we comprise distinct approaches for chitosan functionalization, such as photosensitizers, dendrimers, graft copolymerization, quaternization, acylation, carboxyalkylation, phosphorylation, sulfation, and thiolation. The current review article has also discussed brief insights on chitosan nanoparticle processing for biomedical applications, including wound dressings. The chitosan nanoparticle preparation technologies have been discussed, focusing on wound dressings owing to their targeted and controlled drug release behavior. The future directions of chitosan research include; a) finding an effective solution for chronic wounds, which are unable to heal completely; b) providing effective wound healing solutions for diabetic wounds and venous leg ulcers; c) to better understanding the wound healing mechanism with such materials which can help provide the optimum solution for wound dressing; d) to provide an improved treatment option for wound healing.

Formulation of antiretroviral nanocrystals and development into a microneedle delivery system for potential treatment of HIV-associated neurocognitive disorder (HAND)

HIV/AIDS remains a major global public health issue. While antiretroviral therapy is effective at reducing the viral load in the blood, up to 50% of those with HIV suffer from some degree of HIV-associated neurocognitive disorder, due to the presence of the blood-brain barrier restricting drugs from crossing into the central nervous system and treating the viral reservoir there. One way to circumvent this is the nose-to-brain pathway. This pathway can also be accessed via a facial intradermal injection. Certain parameters can increase delivery via this route, including using nanoparticles with a positive zeta potential and an effective diameter of 200 nm or less. Microneedle arrays offer a minimally invasive, pain-free alternative to traditional hypodermic injections. This study shows the formulation of nanocrystals of both rilpivirine (RPV) and cabotegravir, followed by incorporation into separate microneedle delivery systems for application to either side of the face. Following an in vivo study in rats, delivery to the brain was seen for both drugs. For RPV, a C_max was seen at 21 days of 619.17 ± 73.32 ng/g, above that of recognised plasma IC90 levels, and potentially therapeutically relevant levels were maintained for 28 days. For CAB, a C_max was seen at 28 days of 478.31 ± 320.86 ng/g, and while below recognised 4IC90 levels, does indicate that therapeutically relevant levels could be achieved by manipulating final microaaray patch size in humans.

Optimization of the different phases of the freeze-drying process of solid lipid nanoparticles using experimental designs

In this work, the effect of cryoprotectant type and concentration and freeze-drying process parameters were evaluated to determine an optimal freeze-drying process for celecoxib-loaded solid lipid nanoparticles. Different cryoprotectants were tested at different weight ratios (cryoprotectant:lipid). Trehalose, maltose, and sucrose at a 1:1 wt ratio were selected for further use in optimizing the freeze-drying process through experimental designs to accurately define the freezing, primary, and secondary drying conditions of the freeze-drying process. The optimal freeze-dried solid lipid nanoparticles were subjected to a 6-month stability study at either 4 °C or 25 °C/60% RH, resulting in significant growth when the nanoparticles were stored at 25 °C/60% RH. The best results were obtained with trehalose as a cryoprotectant and storage at 4 °C. Furthermore, the in vitro release data showed a significantly different release profile before and after optimization of the freeze-drying process, suggesting that the optimization of the freeze-drying process affected the quality of the freeze-dried cake. In conclusion, a successful lyophilization process was obtained due to rational cooperation between a good formulation and optimal conditions in the freezing and drying steps. This yielded an acceptable non-collapsed freeze-dried cake with good redispersibility, minimal changes in physicochemical properties, and long-term stability at 4 °C.

Lyoprotectant Formulation and Optimization of the J-Aggregates Astaxanthin/BSA/Chitosan Nanosuspension

Astaxanthin is a carotenoid with excellent antioxidant activity. However, this small lipid-soluble molecule is insoluble in water and has low stability. Although this situation can be improved when astaxanthin is prepared as a nanosuspension, the aqueous form is still not as convenient and safe as the dry powder form for storage, transport, and use. The lyophilization process provides better protection for thermosensitive materials, but this leads to collapse and agglomeration between nanoparticles. To improve this situation, appropriate lyophilization protectants are needed to offer support between the nanoparticles, such as sugars, amino acids, and hydroxy alcohols. The purpose of this work is to screen lyophilization protectants by single-factor experiments and response surface optimization experiments and then explore the optimal ratio of compound lyophilization protectants, and finally, make excellent astaxanthin/BSA/chitosan nanosuspension (ABC-NPs) lyophilized powder. The work shows that the optimal ratio of the compounding lyophilization protectant is 0.46% oligomeric mannose, 0.44% maltose, and 0.05% sorbitol (w/v). The ABC-NPs lyophilized powder prepared under the above conditions had a re-soluble particle size of 472 nm, with a ratio of 1.32 to the particle size of the sample before lyophilization. The lyophilized powder was all in the form of a pink layer. The sample was fluffy and dissolved entirely within 10 s by shaking with water. Consequently, it is expected to solve the problem of inconvenient storage and transportation of aqueous drugs and to expand the application of nanomedicine powders and tablets.

Smartcrystals for Efficient Dissolution of Poorly Water-Soluble Meloxicam

Nanocrystal is widely applied to improve the dissolution of poorly water-soluble drugs. We aimed to prepare meloxicam (MLX) nanocrystals using the bead mill method, followed by high-pressure homogenization (HPH). Simple drying at room temperature (RD), vacuum-drying (VD), and freeze-drying (FD) using mannitol or trehalose as a cryoprotectant were applied to obtain dry nanocrystals. The nanocrystals were fully characterized. The MLX nanosuspension containing 5% w/v MLX and 1% w/v of Pluronic F68 showing a mean particle size (MPS) of 242 nm and a polydispersity index (PDI) of 0.36 was prepared after 40 min of premilling and 30 min of HPH. The dried nanocrystals were spherical within the nano range. DSC and XRPD confirmed the absence of MLX amorphization. The smartcrystals showed enhanced MLX release. Approximately 100% release was achieved with phosphate buffer (PB), pH 5.6, and 80% was released with PB, pH 7.4, from the freeze-dried samples. The results revealed the effects of the drying method and cryoprotectant type on the properties of dry nanocrystals. The freeze-dried samples showed the smallest particle size, in particular trehalose-based samples. On the other hand, mannitol-based dried samples showed the highest crystallinity index among all nanocrystals (77.8%), whereas trehalose showed the lowest (59.2%). These factors explained the dissolution differences among the samples.

Spray freeze drying to solidify Nanosuspension of Cefixime into inhalable microparticles

PURPOSE

Spray-freeze drying (SFD) incorporating diverse carbohydrates and leucine was employed to obtain dried nanosuspension of cefixime with improved dissolution profile, good dispersibility, and excellent inhalation performance.

METHODS

Nanoprecipitation was utilized to prepare nanoparticles (NPs). Nanosuspensions of cefixime were solidified via SFD to access inhalable microparticles. The aerosolization efficiencies were evaluated through twin stage impinger (TSI). Laser light scattering and scanning electron microscopy (SEM) provided assistance to determine the particle size/size distribution and morphology, respectively. Amorphous/ crystalline states of materials were examined via differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Release profiles of candidate preparations were evaluated.

RESULTS

The fine particle fraction (FPF) ranged from 18.96 ± 0.76 to 79.28 ± 0.45%. The highest value resulted from trehalose with NP/carrier ratio of 1:1 and leucine 20%. The particle size varied from 5.24 ± 0.97 to 10.17 ± 1.01 μm. The most and the least size distribution were achieved in mannitol and trehalose containing formulations, respectively. The majority of samples demonstrated ideally spherical morphology with diverse degrees of porosity and without needle-shaped structure. Percentages of release in F₇ and F₈ were 89.33 ± 0.88% and 93.54 ± 1.02%, respectively, via first 10 min.

CONCLUSION

SFD of nanosuspensions can be established as a platform for the pulmonary delivery of poorly water-soluble molecules of cefixime. Trehalose and raffinose with a lower ratio of NP to the carrier and higher level of leucine could be introduced as favorable formulations for further respiratory delivery of cefixime.

Development of Pharmaceutical Nanomedicines: From the Bench to the Market

Nanotechnology plays a significant role in the field of medicine and in drug delivery, mainly due to the major limitations affecting the conventional pharmaceutical agents, and older formulations and delivery systems. The effect of nanotechnology on healthcare is already being felt, as various nanotechnology applications have been developed, and several nanotechnology-based medicines are now on the market. Across many parts of the world, nanotechnology draws increasing investment from public authorities and the private sector. Most conventional drug-delivery systems (CDDSs) have an immediate, high drug release after administration, leading to increased administration frequency. Thus, many studies have been carried out worldwide focusing on the development of pharmaceutical nanomedicines for translation into products manufactured by local pharmaceutical companies. Pharmaceutical nanomedicine products are projected to play a major role in the global pharmaceutical market and healthcare system. Our objectives were to examine the nanomedicines approved by the Food and Drug Administration (FDA) and the European Medicines Agency (EMA) in the global market, to briefly cover the challenges faced during their development, and to look at future perspectives. Additionally, the importance of nanotechnology in developing pharmaceutical products, the ideal properties of nanocarriers, the reasons behind the failure of some nanomedicines, and the important considerations in the development of nanomedicines will be discussed in brief.

Development of topical eye-drops of lactoferrin-loaded biodegradable nanoparticles for the treatment of anterior segment inflammatory processes

Ocular inflammation is one of the most common comorbidities associated to ophthalmic surgeries and disorders. Since conventional topical ophthalmic treatments present disadvantages such as low bioavailability and relevant side effects, natural alternatives constitute an unmet medical need. In this sense, lactoferrin, a high molecular weight protein, is a promising alternative against inflammation. However, lactoferrin aqueous instability and high nasolacrimal duct drainage compromises its potential effectiveness. Moreover, nanotechnology has led to an improvement in the administration of active compounds with compromised biopharmaceutical profiles. Here, we incorporate lactoferrin into biodegradable polymeric nanoparticles and optimized the formulation using the design of experiments approach. A monodisperse nanoparticles population was obtained with an average size around 130 nm and positive surface charge. Pharmacokinetic and pharmacodynamic behaviour were improved by the nanoparticles showing a prolonged lactoferrin release profile. Lactoferrin nanoparticles were non-cytotoxic and non-irritant neither in vitro nor in vivo. Moreover, nanoparticles exhibited significantly increased anti-inflammatory efficacy in cell culture and preclinical assays. In conclusion, lactoferrin loaded nanoparticles constitute a safe and novel nanotechnological tool suitable for the treatment of ocular inflammation.

Lyophilization of Nanocapsules: Instability Sources, Formulation and Process Parameters

Polymeric nanocapsules have gained more and more interest in the medical sciences. Their core-shell structure offers numerous advantages, especially regarding their use as drug delivery systems. This review begins by presenting the different intrinsic sources of the instability of nanocapsules. The physical and chemical potential instabilities of nanocapsules reduce their shelf-life and constitute a barrier to their clinical use and to their commercialization. To overcome these issues, lyophilization is often used as a process of choice in the pharmaceutical industry especially when labile compounds are used. The state of the art of lyophilization nanocapsules is reviewed. The formulation properties and the process parameters are discussed for a complete understanding of their impact on the stability and storage of the final dried product. To assess the quality of the dried product, various characterization methods are also discussed.

PLGA-based nanomedicines manufacturing: Technologies overview and challenges in industrial scale-up

Nanomedicines based on poly(lactic-co-glycolic acid) (PLGA) carriers offer tremendous opportunities for biomedical research. Although several PLGA-based systems have already been approved by both the Food and Drug Administration (FDA) and the European Medicine Agency (EMA), and are widely used in the clinics for the treatment or diagnosis of diseases, no PLGA nanomedicine formulation is currently available on the global market. One of the most impeding barriers is the development of a manufacturing technique that allows for the transfer of nanomedicine production from the laboratory to an industrial scale with proper characterization and quality control methods. This review provides a comprehensive overview of the technologies currently available for the manufacturing and analysis of polymeric nanomedicines based on PLGA nanoparticles, the scale-up challenges that hinder their industrial applicability, and the issues associated with their successful translation into clinical practice.

Ferulic Acid-Loaded Polymeric Nanoparticles for Potential Ocular Delivery

Ferulic acid (FA) is an antioxidant compound that can prevent ROS-related diseases, but due to its poor solubility, therapeutic efficacy is limited. One strategy to improve the bioavailability is nanomedicine. In the following study, FA delivery through polymeric nanoparticles (NPs) consisting of polylactic acid (NPA) and poly(lactic-co-glycolic acid) (NPB) is proposed. To verify the absence of cytotoxicity of blank carriers, a preliminary in vitro assay was performed on retinal pericytes and endothelial cells. FA-loaded NPs were subjected to purification studies and the physico-hemical properties were analyzed by photon correlation spectroscopy. Encapsulation efficiency and in vitro release studies were assessed through high performance liquid chromatography. To maintain the integrity of the systems, nanoformulations were cryoprotected and freeze-dried. Morphology was evaluated by a scanning electron microscope. Physico-chemical stability of resuspended nanosystems was monitored during 28 days of storage at 5 °C. Thermal analysis and Fourier-transform infrared spectroscopy were performed to characterize drug state in the systems. Results showed homogeneous particle populations, a suitable mean size for ocular delivery, drug loading ranging from 64.86 to 75.16%, and a controlled release profile. The obtained systems could be promising carriers for ocular drug delivery, legitimating further studies on FA-loaded NPs to confirm efficacy and safety in vitro.

Insights into Terminal Sterilization Processes of Nanoparticles for Biomedical Applications

Nanoparticles possess a huge potential to be employed in numerous biomedical purposes; their applications may include drug delivery systems, gene therapy, and tissue engineering. However, the in vivo use in biomedical applications requires that nanoparticles exhibit sterility. Thus, diverse sterilization techniques have been developed to remove or destroy microbial contamination. The main sterilization methods include sterile filtration, autoclaving, ionizing radiation, and nonionizing radiation. Nonetheless, the sterilization processes can alter the stability, zeta potential, average particle size, and polydispersity index of diverse types of nanoparticles, depending on their composition. Thus, these methods may produce unwanted effects on the nanoparticles' characteristics, affecting their safety and efficacy. Moreover, each sterilization method possesses advantages and drawbacks; thus, the suitable method's choice depends on diverse factors such as the formulation's characteristics, batch volume, available methods, and desired application. In this article, we describe the current sterilization methods of nanoparticles. Moreover, we discuss the advantages and drawbacks of these methods, pointing out the changes in nanoparticles' biological and physicochemical characteristics after sterilization. Our main objective was to offer a comprehensive overview of terminal sterilization processes of nanoparticles for biomedical applications.

Targeted drug delivery of Methotrexate in situ gels for the treatment of Rheumatoid Arthritis

Rheumatoid arthritis (RA) is considered a debilitating disease that increases the risk of significant morbidity and premature mortality. To circumvent drug-related toxicity and ineffectiveness of anti-inflammatory drugs, there is a significant need for an advanced delivery system that increases bioavailability. The feasibility of in situ gel of methotrexate sodium (MTS) as an effective management for Rheumatoid arthritis was investigated. It was formulated with pluronic F-127 (PLF-127) as primary polymer, hydroxypropyl methylcellulose K4M (HK4M), and polycarbophil (PCL) as a copolymer and characterized by various parameters. The efficacy evaluation by Freund's complete adjuvant (FCA) model, biocompatibility assessment by histopathological studies conducted. The optimized in situ gel (M4) was thermoresponsive, released 93.26 ± 2.39% MTS at 96 hours. In addition, distribution of MTS was even in the optimized sterile and syringeable in situ gel. In vivo studies on wistar rats demonstrated a substantial reduction in paw oedema during the 28-day study period and were biocompatible with the tissues at the injection site. The study was successful in formulating, optimizing MTS in situ gel for effective management of RA.

Freeze-Drying of Pharmaceutical and Nutraceutical Nanoparticles: The Effects of Formulation and Technique Parameters on Nanoparticles Characteristics

Nanoparticles (NPs) are of the most interesting novel vehicles for effective drug delivery to humans. Freeze drying is known as an engaging process to improve the long lasting stability of NPs formulations. This study aims to elucidate the importance of various parameters involving in freeze-drying of the most common pharmaceutical/nutraceutical NPs including nanosuspensions, nanocrystals (NCs), cocrystals/nanococrystals, nanoemulsions (NEs), nanocapsules (NCPs) and nanospheres (NSPs). Regarding this, the therapeutic goals of NPs and specifications of drug must be considered. According to our survey, the most influential factors for achieving optimum results include type and concentration of cryoprotectant/lyoprotectant, stabilizer structure and concentration, the NPs concentration in solution, freezing, annealing, and drying rate, the interaction between protectants and stabilizer, solvent type and antisolvent to solvent ratio. The study shows that for each class of NPs, specific variables are of highest significance and should be optimized. For instance, about NCs, freezing rate and antisolvent/solvent ratio should be particularly considered and for emulsified NPs, the best results have been obtained by 5-20% of saccharides as cryoprotectants. These findings suggest that to obtain a product with the lowest aggregation and particle size (PS), optimization of the effective factors in formulation and lyophilization process are essential.

Concentration of Polymer Nanoparticles Through Dialysis: Efficacy and Comparison With Lyophilization for PEGylated and Zwitterionic Systems

Biodegradable polymeric nanoparticles (NPs) are attracting increasing attention as carriers for drug delivery. However, one of the main factors limiting their transition to the market is their premature degradation and release of the payload during the storage. Therefore, for increasing the formulation shelf-life, the removal of water is of paramount importance. In this work, we synthesized both polyethylene glycol (PEG)-stabilized and zwitterionic NPs via Reversible Addition Fragmentation Chain Transfer (RAFT) Polymerization. We demonstrated that lyophilization leads the PEGylated NPs to irreversible aggregation, while the stability of the zwitterionic NPs was preserved only using a cryoprotectant. Therefore, we developed an alternative method for the NP concentration, based on the dialysis against a concentrated PEG solution. This method was optimized in terms of concentration factor (Fc), the ratio between the final and initial NP concentration, by acting on the PEG concentration in the dialysis medium, on its volume and on the initial NP concentration. With this approach, Fc up to 40 can be achieved in less than 10 h, preserving the possibility of redispersing the NPs to their original particle size distribution. Therefore, the dialysis proposed herein is a valuable alternative to lyophilization for the concentration of polymer NPs preserving their stability.

Formulation and In-Vitro Characterization of Chitosan-Nanoparticles Loaded with the Iron Chelator Deferoxamine Mesylate (DFO)

The objective of this study was to develop chitosan (CS) nanoparticles (NPs) loaded with deferoxamine mesylate (DFO) for slow release of this iron-chelating drug. Drug nanoencapsulation was performed via ionic gelation of chitosan using sodium tripolyphosphate (TPP) as cross-linker. Nanoparticles with a size ranging between 150 and 400 nm were prepared for neat CS/TPP with a 2/1 molar ratio while their yield was directly dependent on the applied stirring rate during the preparation process. DFO at different content (20, 45 and 75 wt %) was encapsulated into these nanoparticles. We found that drug loading correlates with increasing DFO content while the entrapment efficiency has an opposite behavior due to the high solubility of DFO. Hydrogen-bonding between amino and hydroxyl groups of DFO with reactive groups of CS were detected using FT-IR spectroscopy while X-ray diffraction revealed that DFO was entrapped in amorphous form in the CS nanoparticles. DFO release is directly dependent on the content of loaded drug, while model analysis revealed that the release mechanism of DFO for the CS/TPP nanoparticles is by diffusion. Treatment of murine RAW 264.7 macrophages with nanoencapsulated DFO promoted an increased expression of transferrin receptor 1 (TfR1) mRNA, a typical homeostatic response to iron deficiency. These data provide preliminary evidence for release of pharmacologically active DFO from the chitosan nanoparticles.

Effect of UV and Gamma Irradiation Sterilization Processes in the Properties of Different Polymeric Nanoparticles for Biomedical Applications

The sterilization processes of nanoparticles (NP) by autoclaving and filtration are two of the most utilized methods in the pharmaceutical industry but are not always a viable option. For this reason, the search for alternative options such as UV and gamma radiation is of interest. In this work, we evaluated both types of sterilization on two types of NP in solid state widely employed in the literature for biomedical applications, poly-(ε-caprolactone) and poly(D, L-lactide-co-glycolide) acid NP stabilized with polyvinyl alcohol. Physicochemical properties and cell viability were studied pre- and post-sterilization. The efficiency of irradiation sterilization was performed by a test of sterility using 1 × 10⁸ CFU/mL of Escherichia coli, Staphylococcus aureus, and Candida albicans. Microbiological monitoring revealed that both methods were sufficient for sterilization. After the UV irradiation sterilization (100 µJ/cm²), no substantial changes were observed in the physicochemical properties of the NP or in the interaction or morphology of human glial cells, though 5 and 10 kGy of gamma irradiation showed slight changes of NP size as well as a decrease in cell viability (from 100 µg/mL of NP). At 5 kGy of radiation doses, the presence of trehalose as cryoprotectant reduces the cell damage with high concentrations of NP, but this did not occur at 10 kGy. Therefore, these methods could be highly effective and low-processing-time options for sterilizing NP for medical purposes. However, we suggest validating each NP system because these generally are of different polymer-composition systems.

Investigating Prime-Pull Vaccination through a Combination of Parenteral Vaccination and Intranasal Boosting

Formulation of inhalable delivery systems containing tuberculosis (TB) antigens to target the site of infection (lungs) have been considered for the development of subunit vaccines. Inert delivery systems such as poly (lactic-co-glycolic acid) (PLGA) are an interesting approach due to its approval for human use. However, PLGA suffers hydrolytic degradation when stored in a liquid environment for prolonged time. Therefore, in this study, nano- and microparticles composed of different PLGA copolymers (50:50, 75:25 and 85:15), sucrose (10% w/v) and L-leucine (1% w/v) encapsulating H56 TB vaccine candidate were produced as dried powders. In vitro studies in three macrophage cell lines (MH-S, RAW264.7 and THP-1) showed the ability of these cells to take up the formulated PLGA:H56 particles and process the antigen. An in vivo prime-pull immunisation approach consisting of priming with CAF01:H56 (2 × subcutaneous (s.c.) injection) followed by a mucosal boost with PLGA:H56 (intranasal (i.n.) administration) demonstrated the retention of the immunogenicity of the antigen encapsulated within the lyophilised PLGA delivery system, although no enhancing effect could be observed compared to the administration of antigen alone as a boost. The work here could provide the foundations for the scale independent manufacture of polymer delivery systems encapsulating antigens for inhalation/aerolisation to the lungs.

Development of PLGA nanoparticles for sustained release of a connexin43 mimetic peptide to target glioblastoma cells

Effective therapeutic delivery of peptide and protein drugs is challenged by short in vivo half-lives due to rapid degradation. Sustained release formulations of αCT1, a 25 amino acid peptide drug, would afford lower dosing frequency in indications that require long term treatment, such as chronic wounds and cancers. In this study, rhodamine B (RhB) was used as a model drug to develop and optimize a double emulsion-solvent evaporation method of poly(lactic-co-glycolic acid) (PLGA) nanoparticle synthesis. Encapsulation of αCT1 in these nanoparticles (NPs) resulted in a sustained in vitro release profile over three weeks, characterized by an initial burst release of approximately 50% of total encapsulated drug over the first three days followed by sustained release over the remaining two and a half weeks. NP uptake by glioblastoma stem cells was through endocytosis and RhB and αCT1 were observed in cells after at least 4 days.

Proniosomes derived niosomes: recent advancements in drug delivery and targeting

Vesicular drug delivery systems have gained wide attention in the field of nanotechnology. Among them proniosomes become the superior over other vesicular carriers. Proniosomes are dry formulations of water soluble nonionic surfactant coated carrier system which immediately forms niosomes upon hydration. They have the capability to overcome the instability problems associated with niosomes and liposomes and have the potential to improve solubility, bioavailability, and absorption of various drugs. Furthermore, they offer versatile drug delivery concept for enormous number of hydrophilic and hydrophobic drugs. They have the potential to deliver drugs effectively through different routes at specific site of action to achieve controlled release action and reduce toxic effects associated with drugs. This review discusses the general preparation techniques of proniosomes and mainly focus on the applications of proniosomes in drug delivery and targeting. Moreover, this review demonstrates critical appraisal of the literature for proniosomes. Additionally, this review extensively explains the potential of proniosomes in delivering drugs via different routes, such as oral, parenteral, dermal and transdermal, ocular, oral mucosal, vaginal, pulmonary, and intranasal. Finally, the comparison of proniosomes with niosomes manifests the clear distinction between them. Moreover, proniosomes need to be explored for proteins and peptide delivery and in the field of nutraceuticals and develop pilot plant scale up studies to investigate them in industrial set up.

Effects of curcumin-loaded PLGA nanoparticles on the RG2 rat glioma model

BACKGROUND

Curcumin, the active ingredient of turmeric, has a remarkable antitumor activity against various cancers, including glioblastoma. However, it has poor absorption and low bioavailability; thus, to cross the blood-brain barrier and reach tumor tissue, it needs to be transferred to tumor site by special drug delivery systems, such as nanoparticles.

OBJECTIVE

We aimed to evaluate the antitumor activity of curcumin on glioblastoma tissue in the rat glioma-2 (RG2) tumor model when it is loaded on poly(lactic-co-glycolic acid)-1,2-distearoyl-glycerol-3-phospho-ethanolamine-N-[methoxy (polyethylene glycol)-2000] ammonium salt (PLGA-DSPE-PEG) hybrid nanoparticles.

METHODS

Glioblastoma was induced in 42 adult female Wistar rats (250-300g) by RG2 tumor model. The curcumin-loaded nanoparticles were injected by intravenous (n=6) or intratumoral route (n=6). There were five control groups, each containing six rats. First control group was not applied any treatment. The remaining four control groups were given empty nanoparticles or curcumin alone by intravenous or intratumoral route, respectively. The change in tumor volume was assessed by magnetic resonance imaging and histopathology before and 5days after drug injections.

RESULTS

Tumor size decreased significantly after 5days of intratumoral injection of curcumin-loaded nanoparticle (from 66.6±44.6 to 34.9±21.7mm³, p=0.028), whereas it significantly increased in nontreated control group (from 33.9±21.3 to 123.7±41.1mm³, p=0.036) and did not significantly change in other groups (p>0.05 for all).

CONCLUSION

In this in vivo experimental model, intratumoral administration of curcumin-loaded PLGA-DSPE-PEG hybrid nanoparticles was effective against glioblastoma. Curcumine-loaded nanoparticles may have potential application in chemotherapy of glioblastoma.

Mission ImPOxable – or the unknown utilization of non-toxic poly(2-oxazoline)s as cryoprotectants and surfactants at the same time

Polymeric nanoparticles are produced using hydrophilic poly(2-oxazoline)s (P(Ox)s) as particle stabilizers during preparation, purification and lyophilization as an all-in-one system.

Synthesis, characterization and in vivo evaluation of a magnetic cisplatin delivery nanosystem based on PMAA-graft-PEG copolymers

The development of anticancer drug delivery systems which retain or enhance the cytotoxic properties of the drug to tumorous tissues, while reducing toxicity to other organs is of key importance. We investigated different poly(methacrylic acid)-g-poly(ethyleneglycol methacrylate) polymers as in situ coating agents for magnetite nanocrystallites. The obtained magnetic nano-assemblies were in turn thoroughly characterized for their structural, colloidal and physicochemical properties (drug loading capacity/release, magnetic field triggered drug release, cell uptake and localization) in order to select the best performing system. With the focus on in vivo validation of such magnetic drug delivery systems for first time, we selected cisplatin as the drug, since it is a potent anticancer agent which exhibits serious side effects due to lack of selectivity. In addition, cisplatin would offer facile determination of the metal content in the animal tissues for biodistribution studies. Alongside post-mortem Pt determination in the tissues, the biodistribution of the drug nanocarriers was also monitored in real time with PET-CT (positron emission tomography/computed tomography) with and without the presence of magnetic field gradients; using a novel chelator-free method, the nanoparticles were radiolabeled with ⁶⁸Ga without having to alter their structure with chemical modifications for conjugation of radiochelators. The ability to be radiolabeled in such a straightforward but very robust way, along with their measured high MRI response, renders them attractive for dual imaging, which is an important functionality for translational investigations. Their anticancer properties were evaluated in vitro and in vivo, in a cisplatin resistant HT-29 human colon adenocarcinoma model, with and without the presence of magnetic field gradients. Enhanced anticancer efficacy and reduced toxicity was recorded for the cisplatin-loaded nanocarriers in comparison to the free cisplatin, particularly when a magnetic field gradient was applied at the tumor site. Post mortem and real-time tissue distribution studies did not reveal increased cisplatin concentration in the tumor site, suggesting that the enhanced anticancer efficacy of the cisplatin-loaded nanocarriers is driven by mechanisms other than increased cisplatin accumulation in the tumors.

Influence of freeze-drying and γ-irradiation in preclinical studies of flurbiprofen polymeric nanoparticles for ocular delivery using d-(+)-trehalose and polyethylene glycol

This study investigated the suspension of poly(ε-caprolactone) nanoparticles as an ocular delivery system for flurbiprofen (FB-PεCL-NPs) in order to overcome the associated problems, such as stability, sterility, tolerance, and efficacy, with two different FB-PεCL-NP formulations. The formulations were stabilized with poloxamer 188 (1.66% and 3.5%) and submitted individually for freeze-drying and γ-irradiation with polyethylene glycol 3350 (PEG3350) and d-(+)-trehalose (TRE). Both formulations satisfied criteria according to all physicochemical parameters required for ocular pharmaceuticals. The FB-PεCL-NP formulations showed non-Newtonian behavior and sustained drug release. Ex vivo permeation analysis using isolated ocular pig tissues suggested that the presence of PEG3350 results in a reduction of FB transcorneal permeation. Moreover, TRE improved the penetration of FB across the cornea, especially after γ-irradiation. In addition, both formulations did not show a significant affinity in increasing FB transscleral permeation. Both formulations were classified as nonirritating, safe products for ophthalmic administration according to hen’s egg test-chorioallantoic membrane and Draize eye test. Furthermore, an in vivo anti-inflammatory efficacy test showed that irradiated FB-PεCL-NPs prepared with PEG3350 (IR-NPsPEG) have longer anti-inflammatory effects than those presented with irradiated FB-PεCL-NPs prepared with TRE (IR-NPsTRE). IR-NPsPEG showed a suitable physical stability after an aqueous reconstitution over >30 days. This study concludes that both formulations meet the Goldman’s criteria and demonstrate how irradiated nanoparticles, with innovative permeation characteristics, could be used as a feasible alternative to a flurbiprofen solution for ocular application in clinical trials.

Effect of the Freezing Step in the Stability and Bioactivity of Protein-Loaded PLGA Nanoparticles Upon Lyophilization

PURPOSE

The freezing step in lyophilization is the most determinant for the quality of biopharmaceutics. Using insulin as model of therapeutic protein, our aim was to evaluate the freezing effect in the stability and bioactivity of insulin-loaded PLGA nanoparticles. The performance of trehalose, sucrose and sorbitol as cryoprotectants was evaluated.

METHODS

Cryoprotectants were co-encapsulated with insulin into PLGA nanoparticles and lyophilized using an optimized cycle with freezing at -80°C, in liquid nitrogen, or ramped cooling at -40°C. Upon lyophilization, the stability of protein structure and in vivo bioactivity were assessed.

RESULTS

Insulin was co-encapsulated with cryoprotectants resulting in particles of 243-394 nm, zeta potential of -32 to -35 mV, and an association efficiency above 90%. The cryoprotectants were crucial to mitigate the freezing stresses and better stabilize the protein. The insulin structure maintenance was evident and close to 90%. Trehalose co-encapsulated insulin-loaded PLGA nanoparticles demonstrated enhanced hypoglycemic effect, comparatively to nanoparticles without cryoprotectant and added with trehalose, due to a superior insulin stabilization and bioactivity.

CONCLUSIONS

The freezing process may be detrimental to the structure of protein loaded into nanoparticles, with negative consequences to bioactivity. The co-encapsulation of cryoprotectants mitigated the freezing stresses with benefits to protein bioactivity.

Facts and evidences on the lyophilization of polymeric nanoparticles for drug delivery

Lyophilization has been used to improve the long-term stability of polymeric nanoparticles for drug delivery applications, avoiding their instability in suspension. However, this dehydration process may induce stresses to nanoparticles, mitigated by the use of some excipients such as cryo- and lyoprotectants. Still, the lyophilization of polymeric nanoparticles is frequently based in empirical principles, without considering the physical-chemical properties of formulations and the engineering principles of lyophilization. Therefore, the optimization of formulations and the lyophilization cycle is crucial to obtain a good lyophilizate, and guarantee the preservation of nanoparticle stability. The proper characterization of the lyophilizate and nanoparticles has a great importance in achieving these purposes. This review updates the fundaments involved in the optimization procedures for lyophilization of polymeric nanoparticles, with the aim of obtaining the maximum stability of formulations. Different characterization methods to obtain and guarantee a good lyophilized product are also discussed. A special focus is given to encapsulated therapeutic proteins. Overall, this review is a contribution for the understanding of the parameters involved in the lyophilization of polymeric nanoparticles. This may definitely help future works to obtain lyophilized nanoparticles with good quality and with improved therapeutic benefits.

Effect of cryoprotectants on the porosity and stability of insulin-loaded PLGA nanoparticles after freeze-drying

PLGA nanoparticles are useful to protect and deliver proteins in a localized or targeted manner, with a long-term systemic delivery pattern intended to last for a period of time, depending on polymer bioerosion and biodegradability. However, the principal concern regarding these carriers is the hydrolytic instability of polymer in aqueous suspension. Freeze-drying is a commonly used method to stabilize nanoparticles, and cryoprotectants may be also used, to even increase its physical stability. The aim of the present work was to analyze the influence of cryoprotectants on nanoparticle stability and porosity after freeze-drying, which may influence protein release and stability. It was verified that freeze-drying significantly increased the number of pores on PLGA-NP surface, being more evident when cryoprotectants are added. The presence of pores is important in a lyophilizate to facilitate its reconstitution in water, although this may have consequences to protein release and stability. The release profile of insulin encapsulated into PLGA-NP showed an initial burst in the first 2 h and a sustained release up to 48 h. After nanoparticles freeze-drying the insulin release increased about 18% in the first 2 h due to the formation of pores, maintaining a sustained release during time. After freeze-drying with cryoprotectants, the amount of insulin released was higher for trehalose and lower for sucrose, glucose, fructose and sorbitol comparatively to freeze-dried PLGA-NP with no cryoprotectant added. Besides the porosity, the ability of cryoprotectants to be adsorbed on the nanoparticles surface may also play an important role on insulin release and stability.

Multifunctional nanoparticles for brain tumor imaging and therapy

Brain tumors are a diverse group of neoplasms that often carry a poor prognosis for patients. Despite tremendous efforts to develop diagnostic tools and therapeutic avenues, the treatment of brain tumors remains a formidable challenge in the field of neuro-oncology. Physiological barriers including the blood-brain barrier result in insufficient accumulation of therapeutic agents at the site of a tumor, preventing adequate destruction of malignant cells. Furthermore, there is a need for improvements in brain tumor imaging to allow for better characterization and delineation of tumors, visualization of malignant tissue during surgery, and tracking of response to chemotherapy and radiotherapy. Multifunctional nanoparticles offer the potential to improve upon many of these issues and may lead to breakthroughs in brain tumor management. In this review, we discuss the diagnostic and therapeutic applications of nanoparticles for brain tumors with an emphasis on innovative approaches in tumor targeting, tumor imaging, and therapeutic agent delivery. Clinically feasible nanoparticle administration strategies for brain tumor patients are also examined. Furthermore, we address the barriers towards clinical implementation of multifunctional nanoparticles in the context of brain tumor management.

Poly[LA-(Glc-Leu)] copolymer as a carrier for ocular delivery of ciprofloxacin: formulation, characterization and in vivo biocompatibility study

Background: Ciprofloxacin hydrochloride-encapsulated poly[LA-(Glc-Leu)] copolymeric nanoparticles were prepared to provide sustained release and ameliorate shortcomings associated with eye drops. Methods: Poly[LA-(Glc-Leu)] copolymer was synthesized by ring opening copolymerization of l-lactide with a cyclodepsipetide. Ciprofloxacin hydrochloride-loaded polymeric nanoparticles were prepared by double emulsification-solvent evaporation technique with emphasis on optimization of different process and formulation variables. Results: Optimized formulation showed encapsulation efficiency of approximately 63.08 ± 5.88% and a positive zeta potential of +17.46 mV. Scanning electron microscope study revealed the spherical shape of the nanoparticles with a particle size 300–400 nm. In vitro drug-release studies showed sustained release for 24 h with biphasic release pattern. In vivo ocular tolerability study in rabbits demonstrated no signs of toxicity or irritation parallel to the results obtained with the marketed formulation. Conclusion: Poly[LA-(Glc-Leu)] copolymer can be used as an efficient carrier for nanoparticle preparation of ciprofloxacin.

The effect of cryoprotection on the use of PLGA encapsulated iron oxide nanoparticles for magnetic cell labeling

Magnetic PLGA nanoparticles are a significant advancement in the quest to translate MRI-based cell tracking to the clinic. The benefits of these types of particles are that they encapsulate large amounts of iron oxide nanocrystals within an FDA-approved polymer matrix, combining the best aspects of inert micron-sized iron oxide particles, or MPIOs, and biodegradable small particles of iron oxide, or SPIOs. Practically, PLGA nanoparticle fabrication and storage requires some form of cryoprotectant to both protect the particle during freeze drying and to promote resuspension. While this is a commonly employed procedure in the fabrication of drug loaded PLGA nanoparticles, it has yet to be investigated for magnetic particles and what effect this might have on internalization of magnetic particles. As such, in this study, magnetic PLGA nanoparticles were fabricated with various concentrations of two common cryoprotectants, dextrose and sucrose, and analyzed for their ability to magnetically label cells. It was found that cryoprotection with either sugar significantly enhanced the ability to resuspend nanoparticles without aggregation. Magnetic cell labeling was impacted by sugar concentration, with higher sugar concentrations used during freeze drying more significantly reducing magnetic cell labeling than lower concentrations. These studies suggest that cryoprotection with 1% dextrose is an optimal compromise that preserves monodispersity following resuspension and high magnetic cell labeling.

Rivastigmine-loaded L-lactide-depsipeptide polymeric nanoparticles: decisive formulation variable optimization

The main aim of the investigation was to explore a novel L-lactide-depsipeptide copolymer for the development of rivastigmine-loaded polymeric nanoparticles. L-lactide-depsipeptide synthesis was based on the ring opening polymerization reaction of L-lactide with the cyclodepsipeptide, cyclo(Glc-Leu), using tin 2-ethyl hexanoate as an initiator. Rivastigmine-loaded nanoparticles were prepared by the single emulsion-solvent evaporation technique. The influence of various critical formulation variables like sonication time, amount of polymer, amount of drug, stabilizer concentration, drug-to-polymer ratio, and organic-to-aqueous phase ratio on particle size and entrapment efficiency was studied. The optimized formulation having a particle size of 142.2 ± 21.3 nm with an entrapment efficiency of 60.72 ± 3.72% was obtained. Increased rivastigmine entrapment within the polymer matrix was obtained with a relatively low organic-to-aqueous phase ratio and high drug-to-polymer ratio. A decrease in the average size of the nanoparticles was observed with a decrease in the amount of polymer added and an increase in the sonication time. Prolonged sonication time, however, decreased rivastigmine entrapment. From the different lyoprotectant tested, only trehalose was found to prevent nanoparticle aggregation upon application of the freeze-thaw cycle. Drug incorporation into the polymeric matrix was confirmed by the DSC and XRD study. The spherical nature of the nanoparticles was confirmed by the SEM study. The in vitro drug release study showed the sustained release of more than 90% of the drug up to 72 h. Thus, L-lactide-depsipeptide can be used as an efficient carrier for the nanoparticle preparation of rivastigmine.