Mutagenicity and Pollutant Emission Factors of Solid-Fuel Cookstoves: Comparison with Other Combustion Sources

Quantifying functional group compositions of household fuel-burning emissions

Globally, billions of people burn fuels indoors for cooking and heating, which contributes to millions of chronic illnesses and premature deaths annually. Additionally, residential burning contributes significantly to black carbon emissions, which have the highest global warming impacts after carbon dioxide and methane. In this study, we use Fourier transform infrared spectroscopy (FTIR) to analyze fine-particulate emissions collected on Teflon membrane filters from 15 cookstove types and 5 fuel types. Emissions from three fuel types (charcoal, kerosene, and red oak wood) were found to have enough FTIR spectral response for functional group (FG) analysis. We present distinct spectral profiles for particulate emissions of these three fuel types. We highlight the influential FGs constituting organic carbon (OC) using a multivariate statistical method and show that OC estimates by collocated FTIR and thermal-optical transmittance (TOT) are highly correlated, with a coefficient determination of 82.5 %. As FTIR analysis is fast and non-destructive and provides complementary FG information, the analysis method demonstrated herein can substantially reduce the need for thermal-optical measurements for source emissions.

Indoor and Personal PM2.5 Samples Differ in Chemical Composition and Alter Zebrafish Behavior Based on Primary Fuel Source

Fine particulate matter (PM2.5) exposure has been linked to diverse human health impacts. Little is known about the potential heterogeneous impacts of PM2.5 generated from different indoor fuel sources and how exposure differs between personal and indoor environments. Therefore, we used PM2.5 collected by one stationary sampler in a kitchen and personal samplers (female and male participants), in homes (n = 24) in Kheri, India, that used either biomass or liquified petroleum gas (LPG) as primary fuel sources. PM2.5 samples (pooled by fuel type and monitor placement) were analyzed for oxidative potential and chemical composition, including elements and 125 organic compounds. Zebrafish (Danio rerio) embryos were acutely exposed to varying concentrations of PM2.5 and behavioral analyses were conducted. We found relatively high PM2.5 concentrations (5-15 times above World Health Organization daily exposure guidelines) and varied human health-related chemical composition based on fuel type and monitor placement (up to 15% carcinogenic polycyclic aromatic hydrocarbon composition). Altered biological responses, including changes to mortality, morphology, and behavior, were elicited by exposure to all sample types. These findings reveal that although LPG is generally ranked the least harmful compared to biomass fuels, chemical characteristics and biological impacts were still present, highlighting the need for further research in determining the safety of indoor fuel sources.

Emissions of Toxic Substances from Biomass Burning: A Review of Methods and Technical Influencing Factors

In the perspective of energy sustainability, biomass is the widely used renewable domestic energy with low cost and easy availability. Increasing studies have reported the health impacts of toxic substances from biomass burning emissions. To make proper use of biomass as residential solid energy, the evaluation of its health risks and environmental impacts is of necessity. Empirical studies on the characteristics of toxic emissions from biomass burning would provide scientific data and drive the development of advanced technologies. This review focuses on the emission of four toxic substances, including heavy metals, polycyclic aromatic hydrocarbons (PAHs), elemental carbon (EC), and volatile organic compounds (VOCs) emitted from biomass burning, which have received increasing attention in recent studies worldwide. We focus on the developments in empirical studies, methods of measurements, and technical factors. The influences of key technical factors on biomass burning emissions are combustion technology and the type of biomass. The methods of sampling and testing are summarized and associated with various corresponding parameters, as there are no standard sampling methods for the biomass burning sector. Integration of the findings from previous studies indicated that modern combustion technologies result in a 2–4 times reduction, compared with traditional stoves. Types of biomass burning are dominant contributors to certain toxic substances, which may help with the invention or implementation of targeted control technologies. The implications of previous studies would provide scientific evidence to push the improvements of control technologies and establish appropriate strategies to improve the prevention of health hazards.

Mutagenicity of the organic fraction of World Trade Center dust

Most studies of the health effects and chemical characterization of the dust resulting from the catastrophic collapse of the World Trade Center (WTC) on September 11, 2001, have focused on the large inorganic fraction of the dust; however, chemical analyses have identified mutagens and carcinogens in the smaller organic fraction. Here, we determined the mutagenicity of the organic fraction of WTC dust in Salmonella. Only 0.74% of the mass of the particulate matter (PM) <53 μm in diameter was extractable organic matter (EOM). Because the EOM was 10 times more mutagenic in TA100 +S9 than in TA98 +S9 and was negative in TA98 -S9, we inferred, respectively, that polycyclic aromatic hydrocarbons (PAHs) played a role in the mutagenicity and not nitroarenes. In TA98 +S9, the mutagenic potency of the EOM (0.1 revertant/μg EOM) was within the range of EOMs from air and combustion emissions. However, the EOM-based mutagenic potency of the particles (0.0007 revertants/μg PM) was 1-2 orders of magnitude lower than values from a review of 50 combustion emissions and various air samples. We calculated that 37 PAHs analyzed previously in WTC EOM were 5.4% of the EOM mass and 0.04% of the PM mass; some air contained 0.3 μg WTC EOM/m³ (0.02 μg PAHs/m³ ). Populations exposed to WTC dust have elevated levels of prostate and thyroid cancer but not lung cancer. Our data support earlier estimates that PAH-associated cancer risk among this population, for example, PAH-associated lung cancer, was unlikely to be significantly elevated relative to background PAH exposures.

Do Storage Conditions Affect Collected Cookstove Emission Samples? Implications for Field Studies

Cookstove emissions are a significant source of indoor air pollution in developing countries and rural communities world-wide. Considering that many research sites for evaluating cookstove emissions and interventions are remote and require potentially lengthy periods of particulate matter (PM) filter sample storage in sub-optimal conditions (e.g., lack of cold storage), an important question is whether samples collected in the field are stable over time. To investigate this, red oak was burned in a natural-draft stove, and fine PM (PM2.5) was collected on polytetrafluoroethylene filters. Filters were stored at either ambient temperature or more optimal conditions (-20°C or -80°C) for up to 3 months and extracted. The effects of storage temperature and length on stability were evaluated for measurements of extractable organic matter (EOM), PM2.5, and polycyclic aromatic compound (PAC) levels in the filter extracts. A parallel, controlled laboratory condition was also evaluated to further explore sources of variability. In general, PM2.5 and EOM in both simulated field and laboratory samples were similar regardless of the storage condition or duration. The extracts were also analyzed by gas chromatography to quantify 22 PACs and determine similarities and/or differences between the conditions. PAC levels were a more sensitive stability measure in differentiating between storage conditions. The findings suggest that measurements are relatively consistent across storage duration/temperatures for filter samples with relatively low EOM levels. This study aims to inform protocols and filter storage procedures for exposure and intervention research conducted in low- and middle-income countries where studies may be budget- and infrastructure-limited.

In vitro toxicity of particulate matter emissions from residential pellet combustion

Particulate matter emissions (PM₁₀) from the combustion, in a residential stove, of two commercial brands of certified (ENplus A1) pellets, a non-certified brand and laboratory made pellets of acacia were tested for their ability to induce ecotoxic, cytotoxic, and mutagenic responses in unicellular organisms and a human cell line. Ecotoxicity was evaluated through the Vibrio fischeri bioluminescence inhibition assay. Moreover, cytotoxicity was assessed at two time points (24- and 48-hr) through two complementary techniques in order to evaluate the cellular metabolic activity and membrane integrity of human lung epithelial cells A549. The Ames test using two Salmonella typhimurium strains (TA100 and TA98) was employed to assess the mutagenic potential of the polycyclic aromatic hydrocarbon fraction extracted from the PM₁₀ samples. Results obtained with the bioluminescent bacteria indicated that only particles from the combustion of acacia pellets were toxic. All samples induced impairment on the A549 cells metabolic activity, while no significant release of lactate dehydrogenase was recorded. PM₁₀ emissions from acacia pellets were the most cytotoxic, while samples from both certified pellets evoked significant cytotoxicity at lower doses. Cytotoxicity time-dependency was only observed for PM₁₀ from the combustion of acacia pellets and one of the brands of certified pellets. Mutagenic activity was not detected in both S. typhimurium strains. This study emphasises the role of the raw material for pellet manufacturing on the toxicological profile of PM emissions. Alternative raw materials should be deeply investigated before their use in pelletisation and combustion in residential appliances.

Mutagenicity and carcinogenicity of combustion emissions are impacted more by combustor technology than by fuel composition: A brief review

Studies during the past 50 years have characterized the carcinogenicity and mutagenicity of extractable organic material (EOM) of particulate matter (PM) in ambient air and from combustion emissions. We have summarized conclusions from these studies and present data supporting those conclusions for 50 combustion emissions, including carcinogenic potencies on mouse skin (papillomas/mouse/mg EOM), mutagenic potencies (revertants/μg EOM) in the Salmonella (Ames) mutagenicity assay, and mutagenicity emission factors (revertants/kg fuel or revertants/MJ_thermal ) in Salmonella. Mutagenic potencies of EOM from PM in ambient air and combustion emissions span 1-2 orders of magnitude, respectively. In contrast, the revertants/m³ span >5 orders of magnitude due to variable PM concentrations in ambient air. Carcinogenic potencies of EOM from combustion emissions on mouse skin and EOM-associated human lung cancer risk from those emissions both span ~3 orders of magnitude and are highly associated. The ubiquitous presence of polycyclic aromatic hydrocarbons (PAHs), nitroarenes, and aromatic amines results in mutagenic and carcinogenic potencies of PM that span only 1-3 orders of magnitude; most PM induces primarily G to T mutations. Mutagenicity emission factors of combustion emissions span 3-5 orders of magnitude and correlate with PAH emission factors (r > 0.9). Mutagenicity emission factors were largely a function of how material was burned (highly efficient modern combustors versus open burning) rather than what materials were burned. Combustion systems that minimize kinetic and mass-transfer limitations and promote complete oxidation also minimize the mutagenicity of their emissions. This fundamental engineering principle can inform environmental and public health assessments of combustion emissions.

Chemistry, lung toxicity and mutagenicity of burn pit smoke-related particulate matter

BACKGROUND

Open burning of anthropogenic sources can release hazardous emissions and has been associated with increased prevalence of cardiopulmonary health outcomes. Exposure to smoke emitted from burn pits in military bases has been linked with respiratory illness among military and civilian personnel returning from war zones. Although the composition of the materials being burned is well studied, the resulting chemistry and potential toxicity of the emissions are not.

METHODS

Smoke emission condensates from either flaming or smoldering combustion of five different types of burn pit-related waste: cardboard; plywood; plastic; mixture; and mixture/diesel, were obtained from a laboratory-scale furnace coupled to a multistage cryotrap system. The primary emissions and smoke condensates were analyzed for a standardized suite of chemical species, and the condensates were studied for pulmonary toxicity in female CD-1 mice and mutagenic activity in Salmonella (Ames) mutagenicity assay using the frameshift strain TA98 and the base-substitution strain TA100 with and without metabolic activation (S9 from rat liver).

RESULTS

Most of the particles in the smoke emitted from flaming and smoldering combustion were less than 2.5 µm in diameter. Burning of plastic containing wastes (plastic, mixture, or mixture/diesel) emitted larger amounts of particulate matter (PM) compared to other types of waste. On an equal mass basis, the smoke PM from flaming combustion of plastic containing wastes caused more inflammation and lung injury and was more mutagenic than other samples, and the biological responses were associated with elevated polycyclic aromatic hydrocarbon levels.

CONCLUSIONS

This study suggests that adverse health effects of burn pit smoke exposure vary depending on waste type and combustion temperature; however, burning plastic at high temperature was the most significant contributor to the toxicity outcomes. These findings will provide a better understanding of the complex chemical and combustion temperature factors that determine toxicity of burn pit smoke and its potential health risks at military bases.

A critical review of pollutant emission factors from fuel combustion in home stoves

A large population does not have access to modern household energy and relies on solid fuels such as coal and biomass fuels. Burning of these solid fuels in low-efficiency home stoves produces high amounts of multiple air pollutants, causing severe air pollution and adverse health outcomes. In evaluating impacts on human health and climate, it is critical to understand the formation and emission processes of air pollutants from these combustion sources. Air pollutant emission factors (EFs) from indoor solid fuel combustion usually highly vary among different testing protocols, fuel-stove systems, sampling and analysis instruments, and environmental conditions. In this critical review, we focus on the latest developments in pollutant emission factor studies, with emphases on the difference between lab and field studies, fugitive emission quantification, and factors that contribute to variabilities in EFs. Field studies are expected to provide more realistic EFs for emission inventories since lab studies typically do not simulate real-world burning conditions well. However, the latter has considerable advantages in evaluating formation mechanisms and variational influencing factors in observed pollutant EFs. One main challenge in field emission measurement is the suitable emission sampling system. Reasons for the field and lab differences have yet to be fully elucidated, and operator behavior can have a significant impact on such differences. Fuel properties and stove designs affect emissions, and the variations are complexly affected by several factors. Stove classification is a challenge in the comparison of EF results from different studies. Lab- and field-based methods for quantifying fugitive emissions, as an important contributor to indoor air pollution, have been developed, and priority work is to develop a database covering different fuel-stove combinations. Studies on the dynamics of the combustion process and evolution of air pollutant formation and emissions are scarce, and these factors should be an important aspect of future work.

Cookstove Emissions and Performance Evaluation Using a New ISO Protocol and Comparison of Results with Previous Test Protocols

In 2018, the International Organization for Standardization (ISO) 19867-1 "Harmonized laboratory test protocols" were released for establishing improved quality and comparability for data on cookstove air pollutant emissions, efficiency, safety, and durability. This is the first study that compares emissions [carbon dioxide, carbon monoxide, total hydrocarbons, methane, nitrogen oxides, fine particulate matter (PM_2.5), organic carbon, elemental carbon, and ultrafine particles] and efficiency data between the ISO protocol and the Water Boiling Test (WBT). The study examines six stove/fuel combinations [liquefied petroleum gas (LPG), pellet, wood fan, wood rocket, three stone fire, and charcoal] tested in the same US EPA laboratory. Evaluation of the ISO protocol shows improvements over previous test protocols and that results are relatively consistent with former WBT data in terms of tier ratings for emissions and efficiency, as defined by the ISO 19867-3 "Voluntary Performance Targets." Most stove types remain similarly ranked using ISO and WBT protocols, except charcoal and LPG are in higher PM_2.5 tiers with the ISO protocol. Additionally, emissions data including polycyclic aromatic hydrocarbons are utilized to compare between the ISO and Firepower Sweep Test (FST) protocols. Compared to the FST, the ISO protocol results in generally higher PM_2.5 tier ratings.

Estimation of commercial cooking emissions in real-world operation: Particulate and gaseous emission factors, activity influencing and modelling

Measurements of real-world cooking emission factors (CEFs) were rarely reported in recent year's studies. However, the needs for accurately estimating CEFs to produce cooking emission inventories and further implement controlling measures are urgent. In this study, we collected cooking emission aerosols from real-world commercial location operations in Beijing, China. 2 particulate (PM_2.5, OC) and 2 gaseous (NMHC, OVOCs) CEF species were examined on influencing activity conditions of cuisine type, controlling technology, operation scales (represented by cook stove numbers), air exhausting volume, as well as location and operation period. Measured NMHC emission factors (Non-barbecue: 8.19 ± 9.06 g/h and Barbecue: 35.48 ± 11.98 g/h) were about 2 times higher than PM_2.5 emission factors (Non-barbecue: 4.88 ± 3.43 g/h and Barbecue: 15.48 ± 7.22 g/h). T-test analysis results showed a significantly higher barbecued type CEFs than non-barbecued cuisines for both particulate and gaseous emission factor species. The efficacy of controlling technology was showing an average of 50 % in decreasing PM_2.5 CEFs while a 50 % in increasing OC particulate CEFs. The effects of controlling equipment were not significant in removing NMHC and OVOCs exhaust concentrations. CEF variations within cook stove numbers and air exhausting volume also reflected a comprehensive effect of operation scale, cuisine type and control technology. The simulations among activity influencing factors and CEFs were further determined and estimated using hierarchical multiple regression model. The R square of this simulated model for PM_2.5 CEFs was 0.80 (6.17 × 10^-9) with standardized regression coefficient of cuisine type, location, sampling period, control technology, cook stove number (N) and N² of 5.18 (0.02), 5.33 (0.02), 1.93 (0.19), 9.29 (4.18 × 10^-6), 9.10 (1.71 × 10^-3) and -1.18 (2.43 × 10^-3), respectively. In perspective, our study provides ways of better estimating CEFs in real operation conditions and potentially highlighting much more importance of cooking emissions on air quality and human health.

Occurrence, health risk assessment and regional impact of parent, halogenated and oxygenated polycyclic aromatic hydrocarbons in tap water

Recently, derivates of parent polycyclic aromatic hydrocarbons (PAHs) have aroused increasing concerns due to potential health problems they cause. In this study, we first found the coexistence of PAHs, chlorinated PAHs (Cl-PAHs), brominated PAHs (Br-PAHs) and oxygenated PAHs (OPAHs) in tap water. Twenty-six compounds including 13 PAHs, 5 Cl-PAHs, 5 Br-PAHs, and 3 OPAHs were detected. Total concentrations of PAHs (2.50-56.90 ng L^-1) and OPAHs (n.d. to 80.34 ng L^-1) were relatively higher than those of Cl-PAHs (0.30-11.28 ng L^-1) and Br-PAHs (n.d. to 8.20 ng L^-1). We calculated the 95th percentile incremental lifetime cancer risk (ILCR) values of PAHs and HPAHs. In all sampling sites, although no ILCR values for PAHs and HPAHs were higher than 1.00E-06, results still indicates there is still a low cancer risk existed. In addition, regional impact was established by combining ILCR values with population density. Predicted cancer incidence (PCI, people km^-2) was calculated to evaluate regional impact more comprehensively. The results were different from previous hypothesis that sampling sites with high ILCR values may not necessarily present high regional impacts. After total PCI of each district was summed, all calculated districts of Beijing, China were at low regional impact.

Indoor wood combustion, carcinogenic exposure and esophageal cancer in southwest Kenya

BACKGROUND

Exposure to polycyclic aromatic hydrocarbons (PAHs) is a risk factor for esophageal squamous cell carcinoma (ESCC) in high-incidence areas of China, Iran and Brazil, but PAH assessments have not been conducted in East Africa, another ESCC hot spot.

OBJECTIVE

To evaluate demographic or lifestyle factors associated with the PAH biomarker concentrations in the study population, and whether PAH metabolite concentrations showed any associations with esophageal precancerous lesions.

METHODS

We recruited a community-based sample of 289 asymptomatic adults from a rural area of Kenya and performed Lugol's chromoendoscopy to detect esophageal squamous dysplasia (ESD); participants completed a questionnaire and provided a spot urine specimen. We analyzed urine for seven hydroxylated metabolites of naphthalene, fluorene, phenanthrene, and pyrene at the U.S. National Center for Environmental Health, and compared creatinine-corrected PAH metabolite concentrations with questionnaire data and the presence of ESD.

RESULTS

PAH metabolite concentrations among never tobacco users in these rural Kenya residents were 2.4-28.1 times higher than those reported from never tobacco users in Iran, Brazil and the USA. Female sex, cooking indoors, having no post-primary education, and age <50, but not tobacco use, were positively and significantly associated with PAH metabolite concentrations. Almost all participants used wood as cooking fuel. Nine participants had advanced ESD. Adjusted logistic regression showed a significant association between 2-hydroxynaphthalene (OR = 4.19, 95%CI: 1.01-17.47) and advanced ESD. All other PAH metabolites had positive but non-significant associations with advanced ESD.

CONCLUSIONS

Urinary PAH metabolite concentrations among never tobacco users are markedly higher in this group from Kenya than in other populations and are associated with indoor cooking with wood on open, unvented stoves. These metabolite concentrations were also associated with the presence of advanced esophageal dysplasia. Our findings underline the importance of assessing alternative cooking conditions to reduce PAH exposure in this population.

Spatially Resolved Emission Factors to Reduce Uncertainties in Air Pollutant Emission Estimates from the Residential Sector

The residential sector is a major source of air pollutant emission inventory uncertainties. A nationwide field emission measurement campaign was conducted in rural China to evaluate the variabilities of realistic emission factors (EFs) from indoor solid fuel combustion. For a total of 1313 burning events, the overall average EFs (±standard deviation) of PM_2.5 were 8.93 ± 6.95 and 7.33 ± 9.01 g/kg for biomass and coals, respectively, and 89.3 ± 51.2 and 114 ± 87 g/kg for CO. Higher EFs were found from burning of uncompressed straws, while lower EFs were found from processed biomass pellets, coal briquettes, and relatively clean anthracite coals. Modified combustion efficiency was found to be the most significant factor associated with variations in CO EFs, whereas for PM_2.5, fuel and stove differences determined its variations. Weak correlations between PM_2.5 and CO indicated high uncertainties in using CO as a surrogate for PM_2.5. EFs accurately fit log-normal distributions, and obvious spatial heterogeneity was observed attributed to different fuel-stove combinations across the country. Emission estimation variabilities, which are determined by the interquartile ranges divided by the median values, were notably reduced when spatially resolved EFs were adopted in the inventory.

Household air pollution related to biomass cook stove emissions and its interaction with improved cookstoves

Introduction

Household air pollution (HAP) is associated with significant global morbidity and mortality. Newer initiatives including improved cookstove (IC) and cleaner fuels are being implemented to improve HAP effects.

Methods

A literature review was conducted for household air pollution related to biomass cookstoves in resource limited countries. In January 2018, we electronically searched the PubMed database for the term cookstoves with no date restrictions. We included cohort, case-control, cross-sectional studies, conference abstracts, editorials, and reviews; studies that assessed the emissions related to cookstove and factors affecting HAP emissions.

Results

Twenty-three articles met the objectives of the review. Fine particulate matter with aerodynamic diameter <2.5 µm (PM_2.5), carbon monoxide (CO) and polycyclic aromatic hydrocarbons (PAH) are the major HAP emissions. Emission factors are based on the stove and fuel used while the activity is based on cooking practices. Changes in composition and sources of PM_2.5 causes modification to its resulting toxicity. Many PAHs and their metabolites released by HAP have carcinogenic, teratogenic and mutagenic potential. Improving ventilation decreases concentrations of PM_2.5 and CO in the household air. Few standard tools are available to measure ventilation and continued IC efficacy in long term.

Conclusion

Unavailability of tools to measure ventilation and continued IC efficacy in long term affect uniformity and comparability of IC study results. Community education about the health effects of HAP and importance of ventilation in decreasing HAP is an important aspect of public health policy to prevent HAP effects.

Censoring Trace-Level Environmental Data: Statistical Analysis Considerations to Limit Bias

Trace-level environmental data typically include values near or below detection and quantitation thresholds where health effects may result from low-concentration exposures to one chemical over time or to multiple chemicals. In a cook stove case study, bias in dibenzo[a,h]anthracene concentration means and standard deviations (SDs) was assessed following censoring at thresholds for selected analysis approaches: substituting threshold/2, maximum likelihood estimation, robust regression on order statistics, Kaplan-Meier, and omitting censored observations. Means and SDs for gas chromatography-mass spectrometry-determined concentrations were calculated after censoring at detection and calibration thresholds, 17% and 55% of the data, respectively. Threshold/2 substitution was the least biased. Measurement values were subsequently simulated from two log-normal distributions at two sample sizes. Means and SDs were calculated for 30%, 50%, and 80% censoring levels and compared to known distribution counterparts. Simulation results illustrated (1) threshold/2 substitution to be inferior to modern after-censoring statistical approaches and (2) all after-censoring approaches to be inferior to including all measurement data in analysis. Additionally, differences in stove-specific group means were tested for uncensored samples and after censoring. Group differences of means tests varied depending on censoring and distributional decisions. Investigators should guard against censoring-related bias from (explicit or implicit) distributional and analysis approach decisions.

Optically Measured Black and Particulate Brown Carbon Emission Factors from Real-World Residential Combustion Predominantly Affected by Fuel Differences

Residential solid fuel use is an important source of black carbon (BC) but also a main source of uncertainty in BC emission inventories, as reliable real-world emission factors (EFs) and data on consumption of noncommercial household fuels are limited. In this study, particulate BC and brown carbon (BrC) for real-world indoor coal and biomass burning were evaluated using a SootScan model OT21 optical transmissometer from a field campaign including 343 biomass/coal combustion events. The highest BC EF from the burning of coal cake (a mixed fuel locally made from coal and clay) was 1.6-6.4 higher than that of other fuels, and BC EFs were higher for coal combustion than for biomass burning. The highest particulate BrC EF was from charcoal burning and was 1.5-4.3 times higher than that from other biomass and coals. Burning fuel in iron stoves had lower BC and BrC EFs, at approximately 15-66% and 40-54%, respectively, compared with burning in other stove types. The difference between heating and cooking activities was statistically insignificant (p > 0.05). A generalized linear model coupled with dominance analysis evidenced that the EFs were significantly associated with fuel and stove types, with the fuel difference being a major influencing factor explaining 68% of the variation. This suggests that a clean fuel transition would have beneficial impacts on air pollution associated with the residential sector in China. The absorption EFs differed by 2-3 orders of magnitude across different fuel-stove combinations. The Absorption Ångström Exponent values for the particulate from residential solid fuel combustions ranged from 0.92 to 3.7.

Combustion by-products and their health effects: Summary of the 16th international congress

The 16th International Congress on Combustion By-Products and their Health Effects (PIC2019) was held in Ann Arbor, Michigan, from July 10 to 12, 2019. For the last 28 years, this conference has served as an interdisciplinary platform for the discussion of the formation, environmental fate, health effects, policy, and remediation of combustion by-products. The technical areas for PIC2019 included mobile and stationary sources in urban environments, open fires, indoor air pollution, and halogenated pollutants. The congress was sponsored by the National Institute of Environmental Health Sciences (NIEHS), the U.S. EPA, the School of Public Health at the University of Michigan, the Civil and Environmental Engineering Department at the University of Michigan, the Mechanical Engineering Department at the University of Michigan, the Aerospace Engineering Department at the University of Michigan, and the Climate and Space Sciences and Engineering Department at the University of Michigan. Special features of the conference included a career path and round table discussion on translating research and engaging communities.

What is necessary for next-generation atmospheric environmental standards? Recent research trends for PM2.5 -bound polycyclic aromatic hydrocarbons and their derivatives

The air pollution associated with PM_2.5 kills 7 million people every year in the world, especially threatening the health of children in developing countries. However, the current air quality standards depend mainly on particle size. PM_2.5 contains many carcinogenic/mutagenic polycyclic aromatic hydrocarbons (PAHs) and their derivatives such as nitropolycyclic aromatic hydrocarbons and oxygenated PAHs. Among them, environmental standards and guidelines have been set for benzo[a]pyrene by few countries and international organizations. Recent research reports showed that these pollutants are linked to diseases other than lungs, and new methods have been developed for determining trace levels of not only PAHs but also their derivatives. It is time to think about the next-generation environmental standards. This article aims to (a) describe recent studies on the health effects of PAHs and their derivatives other than cancer, (b) describe new analytical methods for PAH derivatives, and (c) discuss the targets for the next-generation standards.

Urinary mutagenicity and oxidative status of wildland firefighters working at prescribed burns in a Midwestern US forest

OBJECTIVE

Wildland firefighters (WLFFs) experience repeated exposures to wildland fire smoke (WFS). However, studies about WLFFs remain regionally limited. The objective of this study was to assess the effect of WFS exposure on urinary mutagenicity and cell oxidation among WLFFs who work at prescribed burns in the Midwestern USA.

METHODS

A total of 120 spot urine samples was collected from 19 firefighters right before (pre-shift), immediately after (post-shift), and the morning (next-morning) following work shifts on prescribed burn days (burn days) and regular workdays (non-burn days). The levels of urinary mutagenicity, 8-isoprostane, malondialdehyde and oxidised guanine species (Ox-GS) were measured. Linear mixed-effect models were used to determine the difference of cross-shift changes in the concentrations of urinary biomarkers.

RESULTS

Post-shift levels of creatinine-corrected urinary mutagenicity and 8-isoprostane were non-significantly higher than pre-shift levels (1.16× and 1.64×; p=0.09 and 0.07) on burn days. Creatinine-corrected Ox-GS levels increased significantly in next-morning samples following WFS exposure (1.62×, p=0.03). A significant difference in cross-shift changes between burn and non-burn days was observed in 8-isoprostane (2.64×, p=0.03) and Ox-GS (3.00×, p=0.02). WLFFs who contained the fire (performed holding tasks) had a higher pre-morning to next-morning change in urinary mutagenicity compared with those who were lighting fires during the prescribed burns (1.56×, p=0.03).

CONCLUSIONS

Compared with the other regions, WLFFs who worked in Midwestern forests had an elevated urinary mutagenicity and systemic oxidative changes associated with WFS exposure at prescribed burns.

Mutagenicity- and pollutant-emission factors of pellet-fueled gasifier cookstoves: Comparison with other combustion sources

Emissions from solid-fuel burning cookstoves are associated with 3 to 4 million premature deaths annually and contribute significantly to impacts on climate. Pellet-fueled gasifier stoves have some emission factors (EFs) approaching those of gas-fuel (liquid petroleum gas) stoves; however, their emissions have not been evaluated for biological effects. Here we used a new International Organization for Standardization (ISO) testing protocol to determine pollutant- and mutagenicity-EFs for a stove designed for pellet fuel, the Mimi Moto, and for two other forced-draft stoves, Xunda and Philips HD4012, burning pellets of hardwood or peanut hulls. The Salmonella assay-based mutagenicity-EFs (revertants/megajouledelivered) spanned three orders of magnitude and correlated highly (r = 0.99; n = 5) with EFs of the sum of 32 particle-phase polycyclic aromatic hydrocarbons (PAHs). The Mimi Moto/hardwood pellet combination had total-PAH- and mutagenicity-EFs 99.2 and 96.6% lower, respectively, compared to data published previously for the Philips stove burning non-pelletized hardwood, and 100 and 99.8% lower, respectively, compared to those of a wood-fueled three-stone fire. The Xunda burning peanut hull pellets had the highest fuel energy-based mutagenicity-EF (revertants/megajoulethermal) of the pellet stove/fuel combinations tested, which was between that of diesel exhaust, a known human carcinogen, and a natural-draft wood stove. Although the Mimi Moto burning hardwood pellets had the lowest fuel energy-based mutagenicity-EF, this value was between that of utility coal and utility wood boilers. This advanced stove/fuel combination has the potential to greatly reduce emissions in contrast to a traditional stove, but adequate ventilation is required to approach acceptable levels of indoor air quality.

Assessment of kitchen emissions using a backpropagation neural network model based on urinary hydroxy polycyclic aromatic hydrocarbons

Kitchen emissions are mixed indoor air pollutants with adverse health effects, but the large-scale assessment is limited by costly equipment and survey methods. This study aimed to discuss the application of backpropagation (BP) neural network models in the assessment of kitchen emissions based on the exposure marker. A total of 3686 participants were recruited for the kitchen survey, and their sleep quality was measured by the Pittsburgh sleep quality index (PSQI). After excluding the confounders, 365 participants were selected to assess their urinary hydroxy polycyclic aromatic hydrocarbons (OH-PAHs) concentrations by ultra-high-performance liquid chromatography/tandem mass spectrometry. Two BP neural network models were then set up using the survey and detection data from the 365 participants and used to predict the total urinary OH-PAHs concentrations of all participants. The total urinary OH-PAHs and 1-hydroxy-naphthalene (1-OHNap) concentrations were significantly higher among the 365 participants with poor sleep quality (global PSQI score > 5; P < 0.05). Results from internal and external validation showed that our model has high credibility (model 2). Further, the participants with higher predicted total urinary OH-PAHs concentrations were associated with the global PSQI score of >5 (odds ratio (OR) = 1.284, 95% confidence interval (CI) = 1.082-1.525 for participants with predicted total urinary OH-PAHs concentrations of over 1.897 μg/mmol creatinine in model 1, and OR = 1.467, 95% CI = 1.240-1.735 for participants with predicted total urinary OH-PAHs concentrations of over 2.253 μg/mmol creatinine in model 2) after adjusting for the confounders. Findings suggest that the BP neural network model is suitable for assessing kitchen emissions, and the urinary OH-PAHs concentrations can be taken as the model outlay.

Evaluation of emission indices and air quality implications of liquefied petroleum gas burners

Major cities in Nigeria has adopted the use of liquefied petroleum gas (LPG) as their main source for domestic cooking, however, this adoption led to different designs of LPG burners in Nigeria market. The emission indices of these burners and their air quality implications are yet to be ascertain. To solve these problems and fill the data gap, laboratory analysis were carried out on 16 conventional LPG burner heads identified in Nigeria market. The emission factors for Carbon monoxide (CO), Oxide of Nitrogen (NOx), Carbon dioxide (CO₂), Hydrocarbons (HC) and sulphur dioxide (SO₂) on the basis of useful energy delivered were 0.123–21.784 g/MJ_d, 1.973–32.943 g/MJ_d, 73.819–147.639 g/MJ_d, 4.069–171.643 g/MJ_d and 0–0.1644 g/MJ_d while the emission rates were 0.000238–0.1125 g/s, 0.0071–0.2 g/s, 0.1083–0.7 g/s, 0.0117–1.2583 g/s and 0–0.000194 g/s respectively. It was observed that results from the study were within the International Organization for Standardization, International Workshop Agreement 11 and World Health Organization indoor air quality guidelines for human protection.

Health effects of household air pollution related to biomass cook stoves in resource limited countries and its mitigation by improved cookstoves

BACKGROUND

Household air pollution (HAP) related to cooking is associated with significant global morbidity and mortality. An estimated three billion people worldwide are exposed to cooking related HAP caused by solid fuel combustion. This exposure is highest for the vulnerable population of women and children resulting in significant cumulative health effects.

METHODS

A literature review was conducted for health effects of household air pollution related to biomass cookstoves in resource limited countries and to evaluate the effect of improved cookstoves on these health effects. We searched PubMed, Embase and Cochrane Library. We conducted searches in January 2018 with a repeat in February 2020. We included only studies conducted in resource limited countries, published in English, irrespective of publication year and studies that examined the health effects of HAP and/or studied the effects of improved cookstove (IC). Two authors independently screened journal article titles, abstracts and full-text articles to identify those that included the following search term: biomass cookstoves and health risks. We also assessed the limitations of IC with barriers to their uptake.

RESULTS

Health effects associated with HAP mostly include increased blood pressure (BP), dyspnea, childhood pneumonia, lung cancer, low birthweight and cardiovascular diseases. Being a global problem with divergent environmental factors including wide variety of fuel used, housing condition, foods prepared, climatic condition and social factors; most solutions though efficient seems inadequate. Improved cookstove (IC) mitigates emissions and improves short term health, though few randomized long-term studies could substantiate its long-standing continuance and health benefits.

CONCLUSION

There is ample data about the health effects of HAP, with some benefit with IC intervention for elevated blood pressure, dyspnea symptoms, mutagenicity and cardiovascular diseases. IC does not have any benefit in pregnancy outcomes or children health.

A Laboratory Assessment of 120 Air Pollutant Emissions from Biomass and Fossil Fuel Cookstoves

Cookstoves emit many pollutants that are harmful to human health and the environment. However, most of the existing scientific literature focuses on fine particulate matter (PM2.5) and carbon monoxide (CO). We present an extensive data set of speciated air pollution emissions from wood, charcoal, kerosene, and liquefied petroleum gas (LPG) cookstoves. One-hundred and twenty gas- and particle-phase constituents-including organic carbon, elemental carbon (EC), ultrafine particles (10-100 nm), inorganic ions, carbohydrates, and volatile/semivolatile organic compounds (e.g., alkanes, alkenes, alkynes, aromatics, carbonyls, and polycyclic aromatic hydrocarbons (PAHs))-were measured in the exhaust from 26 stove/fuel combinations. We find that improved biomass stoves tend to reduce PM2.5 emissions; however, certain design features (e.g., insulation or a fan) tend to increase relative levels of other coemitted pollutants (e.g., EC ultrafine particles, carbonyls, or PAHs, depending on stove type). In contrast, the pressurized kerosene and LPG stoves reduced all pollutants relative to a traditional three-stone fire (≥93% and ≥79%, respectively). Finally, we find that PM2.5 and CO are not strong predictors of coemitted pollutants, which is problematic because these pollutants may not be indicators of other cookstove smoke constituents (such as formaldehyde and acetaldehyde) that may be emitted at concentrations that are harmful to human health.

Mutagenicity emission factors of canola oil and waste vegetable oil biodiesel: Comparison to soy biodiesel

Canola (or rapeseed) oil and waste vegetable oil (WVO) are used commonly to make biodiesel fuels composed completely from these oils (B100) or as blends with petroleum diesel (B0). However, no studies have reported the mutagenic potencies of the particulate matter with diameter ≤2.5 μm (PM_2.5) or the mutagenicity emission factors, such as revertants/MJ_thermal (rev/MJ_th) for these biodiesel emissions. Using strains TA98 and TA100 with the Salmonella (Ames) mutagenicity assay, we determined these metrics for organic extracts of PM_2.5 of emissions from biodiesel containing 5% soy oil (soy B5); 5, 20, 50, and 100% canola (canola B5, B20, B50, B100), and 100% waste vegetable oil (WVO B100). The mutagenic potencies (rev/mg PM_2.5) of the canola B100 and WVO B100 emissions were generally greater than those of B0, whereas the mutagenicity emission factors (rev/MJ_th, rev/kg fuel, and rev/m³) were less, reflecting the lower PM emissions of the biodiesels relative to B0. Nearly all the rev/mg PM_2.5 and rev/MJ_th values were greater in TA98 with S9 than without S9, indicating a relatively greater role for polycyclic aromatic hydrocarbons, which require S9, than nitroarenes, which do not. In TA100 -S9, the rev/mg PM_2.5 and rev/MJ_th for the biodiesels were generally ≥ to those of B0, indicating that most of these biodiesels produced more direct-acting, base-substitution mutagenic activity than did B0. For B100 biodiesels and petroleum diesel, the rev/MJ_th in TA98 + S9 ranked: petroleum diesel > canola > WVO > soy. The diesel emissions generally had rev/MJ_th values orders of magnitude higher than those of large utility-scale combustors (natural gas, coal, oil, or wood) but orders of magnitude lower than those of inefficient open burning (e.g., residential wood fireplaces). These comparative data of the potential health effects of a variety of biodiesel fuels will help inform the life-cycle assessment and use of biodiesel fuels.

Field-based emission measurements of biomass burning in typical Chinese built-in-place stoves

Residential combustion emission contributes significantly to ambient and indoor air pollution in China; however, this pollution source is poorly characterized and often overlooked in national pollution control policies. Few studies, and even fewer field-based investigations, have evaluated pollutant emissions from indoor biomass burning. One significant feature of Chinese household biofuel stoves is that many are built on site. In this study, 112 tests were conducted to investigate pollutant emission factors and variations for 11 fuel-stove combinations in actual use in the field. Results showed that, compared to those emission tests under controlled fuel burning conditions, EFs of methane, sulfur dioxide, particulate matter, and organic carbon from the field-based uncontrolled tests were higher, but carbon monoxide, nitrogen oxides, and elemental carbon were not significantly different. Controlled burning tests may be unrepresentative of real-world fuel burning. Pollutant emissions from uncontrolled burning tests had much higher variations compared with controlled tests. Most pollutant emissions from indoor straw burning are higher than that in open burning, except nitrogen oxides. The typical built-in-place home stoves in China had low efficiencies and high pollutant emissions that were rated as Tier 0 (the worst) or Tier 1 of a four-tier scale according to the International Organization for Standardization, International Workshop Agreement 11-2012. Effective interventions are expected to lower pollutant emissions from residential combustion to improve air quality and to protect human health.

Evaluation of an Air Quality Health Index for Predicting the Mutagenicity of Simulated Atmospheres

No study has evaluated the mutagenicity of atmospheres with a calculated air quality health index (AQHI). Thus, we generated in a UV-light-containing reaction chamber two simulated atmospheres (SAs) with similar AQHIs but different proportions of criteria pollutants and evaluated them for mutagenicity in three Salmonella strains at the air-agar interface. We continuously injected into the chamber gasoline, nitric oxide, and ammonium sulfate, as well as either α-pinene to produce SA-PM, which had a high concentration of particulate matter (PM): 119 ppb ozone (O3), 321 ppb NO2, and 1007 μg/m3 PM2.5; or isoprene to produce SA-O3, which had a high ozone (O3) concentration: 415 ppb O3, 633 ppb NO2, and 55 μg/m3 PM2.5. Neither PM2.5 extracts, NO2, or O3 alone, nor nonphoto-oxidized mixtures were mutagenic or cytotoxic. Both photo-oxidized atmospheres were largely direct-acting base-substitution mutagens with similar mutagenic potencies in TA100 and TA104. The mutagenic potencies [(revertants/h)/(mgC/m3)] of SA-PM (4.3 ± 0.4) and SA-O3 (9.5 ± 1.3) in TA100 were significantly different ( P < 0.0001), but the mutation spectra were not ( P = 0.16), being ∼54% C → T and ∼46% C → A. Thus, the AQHI may have some predictive value for the mutagenicity of the gas phase of air.

Differential exposure and acute health impacts of inhaled solid-fuel emissions from rudimentary and advanced cookstoves in female CD-1 mice

BACKGROUND

There is an urgent need to provide access to cleaner end user energy technologies for the nearly 40% of the world's population who currently depend on rudimentary cooking and heating systems. Advanced cookstoves (CS) are designed to cut emissions and solid-fuel consumption, thus reducing adverse human health and environmental impacts.

STUDY PREMISE

We hypothesized that, compared to a traditional (Tier 0) three-stone (3-S) fire, acute inhalation of solid-fuel emissions from advanced natural-draft (ND; Tier 2) or forced-draft (FD; Tier 3) stoves would reduce exposure biomarkers and lessen pulmonary and innate immune system health effects in exposed mice.

RESULTS

Across two simulated cooking cycles (duration ~ 3h), emitted particulate mass concentrations were reduced 80% and 62% by FD and ND stoves, respectively, compared to the 3-S fire; with corresponding decreases in particles visible within murine alveolar macrophages. Emitted carbon monoxide was reduced ~ 90% and ~ 60%, respectively. Only 3-S-fire-exposed mice had increased carboxyhemoglobin levels. Emitted volatile organic compounds were FD ≪ 3-S-fire ≤ ND stove; increased expression of genes involved in xenobiotic metabolism (COX-2, NQO1, CYP1a1) was detected only in ND- and 3-S-fire-exposed mice. Diminished macrophage phagocytosis was observed in the ND group. Lung glutathione was significantly depleted across all CS groups, however the FD group had the most severe, ongoing oxidative stress.

CONCLUSIONS

These results are consistent with reports associating exposure to solid fuel stove emissions with modulation of the innate immune system and increased susceptibility to infection. Lower respiratory infections continue to be a leading cause of death in low-income economies. Notably, 3-S-fire-exposed mice were the only group to develop acute lung injury, possibly because they inhaled the highest concentrations of hazardous air toxicants (e.g., 1,3-butadiene, toluene, benzene, acrolein) in association with the greatest number of particles, and particles with the highest % organic carbon. However, no Tier 0-3 ranked CS group was without some untoward health effect indicating that access to still cleaner, ideally renewable, energy technologies for cooking and heating is warranted.

Mutagenicity and Lung Toxicity of Smoldering vs. Flaming Emissions from Various Biomass Fuels: Implications for Health Effects from Wildland Fires

BACKGROUND

The increasing size and frequency of wildland fires are leading to greater potential for cardiopulmonary disease and cancer in exposed populations; however, little is known about how the types of fuel and combustion phases affect these adverse outcomes.

OBJECTIVES

We evaluated the mutagenicity and lung toxicity of particulate matter (PM) from flaming vs. smoldering phases of five biomass fuels, and compared results by equal mass or emission factors (EFs) derived from amount of fuel consumed.

METHODS

A quartz-tube furnace coupled to a multistage cryotrap was employed to collect smoke condensate from flaming and smoldering combustion of red oak, peat, pine needles, pine, and eucalyptus. Samples were analyzed chemically and assessed for acute lung toxicity in mice and mutagenicity in Salmonella.

RESULTS

The average combustion efficiency was 73 and 98% for the smoldering and flaming phases, respectively. On an equal mass basis, PM from eucalyptus and peat burned under flaming conditions induced significant lung toxicity potencies (neutrophil/mass of PM) compared to smoldering PM, whereas high levels of mutagenicity potencies were observed for flaming pine and peat PM compared to smoldering PM. When effects were adjusted for EF, the smoldering eucalyptus PM had the highest lung toxicity EF (neutrophil/mass of fuel burned), whereas smoldering pine and pine needles had the highest mutagenicity EF. These latter values were approximately 5, 10, and 30 times greater than those reported for open burning of agricultural plastic, woodburning cookstoves, and some municipal waste combustors, respectively.

CONCLUSIONS

PM from different fuels and combustion phases have appreciable differences in lung toxic and mutagenic potency, and on a mass basis, flaming samples are more active, whereas smoldering samples have greater effect when EFs are taken into account. Knowledge of the differential toxicity of biomass emissions will contribute to more accurate hazard assessment of biomass smoke exposures. https://doi.org/10.1289/EHP2200.

Mutagenicity of particle emissions from solid fuel cookstoves: A literature review and research perspective

Household solid fuel use is a major source of many air pollutants causing severe air pollution and adverse health outcomes. In evaluation of health impacts of household air pollution, it is essential to characterize toxic properties like mutagenicity of residential fuel combustion emissions and exposure assessments. Mutagenicity of emissions from solid fuel cookstoves were analyzed through a literature review. T98 and TA100 strains are two most widely used strains in mutagenic Ames test, and results for these two strains are generally positively correlated though they have different endpoints. Direct and indirect mutagenic activities are positively correlated, and statistically insignificantly different though indirect mutagenic emissions are apparently higher. Mutagenicity emission factors on the basis of fuel energy (MJ) or useful energy delivered (MJd) for solid fuel cookstoves vary in nearly 3 orders of magnitude, ranging from 3.0×10⁴ rev./MJd to 1.8×10⁷ rev./MJd (or 1.1×10⁴ rev./MJ to 4.2×10⁶ rev./MJ). Low mutagenic emissions are reported for high efficiency stoves such as a forced-draft one. Mutagenicity emission factors are positively correlated with emissions of PM_2.5. Relationship between mutagenicity and polycyclic aromatic hydrocarbons (PAHs) emissions is inconsistent among studies as PAHs are minor fractions of toxic organics contributing to the total mutagenicity. Generally, studies on mutagenicity of emissions from household cookstoves are very limited, and future studies are encouraged on mutagenic emissions from different fuel types and household stoves, evaluation of mutagenic activities of both gaseous and particulate emissions, and toxicology and exposure assessments of household air pollution.

Exposure to polycyclic aromatic hydrocarbons and volatile organic compounds among recently pregnant rural Guatemalan women cooking and heating with solid fuels

BACKGROUND

Household air pollution is a major contributor to death and disability worldwide. Over 95% of rural Guatemalan households use woodstoves for cooking or heating. Woodsmoke contains carcinogenic or fetotoxic polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs). Increased PAHs and VOCs have been shown to increase levels of oxidative stress.

OBJECTIVE

We examined PAH and VOC exposures among recently pregnant rural Guatemalan women exposed to woodsmoke and compared exposures to levels seen occupationally or among smokers.

METHODS

Urine was collected from 23 women who were 3 months post-partum three times over 72h: morning (fasting), after lunch, and following dinner or use of wood-fired traditional sauna baths (samples=68). Creatinine-adjusted urinary concentrations of metabolites of four PAHs and eight VOCs were analyzed by liquid chromatography-mass spectrometry. Creatinine-adjusted urinary biomarkers of oxidative stress, 8-isoprostane and 8-OHdG, were analyzed using enzyme-linked immunosorbent assays (ELISA). Long-term (pregnancy through 3 months prenatal) exposure to particulate matter and airborne PAHs were measured.

RESULTS

Women using wood-fueled chimney stoves are exposed to high levels of particulate matter (median 48h PM2.5 105.7μg/m3; inter-quartile range (IQR): 77.6-130.4). Urinary PAH and VOC metabolites were significantly associated with woodsmoke exposures: 2-naphthol (median (IQR) in ng/mg creatinine: 295.9 (74.4-430.9) after sauna versus 23.9 (17.1-49.5) fasting; and acrolein: 571.7 (429.3-1040.7) after sauna versus 268.0 (178.3-398.6) fasting. Urinary PAH (total PAH: ρ=0.89, p<0.001) and VOC metabolites of benzene (ρ=0.80, p<0.001) and acrylonitrile (ρ=0.59, p<0.05) were strongly correlated with long-term exposure to particulate matter. However urinary biomarkers of oxidative stress were not correlated with particulate matter (ρ=0.01 to 0.05, p>0.85) or PAH and VOC biomarkers (ρ=-0.20 to 0.38, p>0.07). Urinary metabolite concentrations were significantly greater than those of heavy smokers (mean cigarettes/day=18) across all PAHs. In 15 (65%) women, maximum 1-hydroxypyrene concentrations exceeded the occupational exposure limit of coke-oven workers.

CONCLUSIONS

The high concentrations of urinary PAH and VOC metabolites among recently pregnant women is alarming given the detrimental fetal and neonatal effects of prenatal PAH exposure. As most women used chimney woodstoves, cleaner fuels are critically needed to reduce smoke exposure.

Characterization of emissions and residues from simulations of the Deepwater Horizon surface oil burns

The surface oil burns conducted by the U.S. Coast Guard from April to July 2010 during the Deepwater Horizon disaster in the Gulf of Mexico were simulated by small scale burns to characterize the pollutants, determine emission factors, and gather particulate matter for subsequent toxicity testing. A representative crude oil was burned in ocean-salinity seawater, and emissions were collected from the plume by means of a crane-suspended sampling platform. Emissions included particulate matter, aromatic hydrocarbons, polychlorinated dibenzodioxins/dibenzofurans, elements, and others, the sum of which accounted for over 92% by mass of the combustion products. The unburned oil mass was 29% of the original crude oil mass, significantly higher than typically reported. Analysis of alkanes, elements, and PAHs in the floating residual oil and water accounted for over 51% of the gathered mass. These emission factors, along with toxicity data, will be important toward examining impacts of future spill burning operations.

Mutagenicity and oxidative damage induced by an organic extract of the particulate emissions from a simulation of the deepwater horizon surface oil burns

Emissions from oil fires associated with the "Deepwater Horizon" explosion and oil discharge that began on April 20, 2010 in the Gulf of Mexico were analyzed chemically to only a limited extent at the time but were shown to induce oxidative damage in vitro and in mice. To extend this work, we burned oil floating on sea water and performed extensive chemical analyses of the emissions (Gullett et al., Marine Pollut Bull, in press, ). Here, we examine the ability of a dichloromethane extract of the particulate material with an aerodynamic size ≤ 2.5 µm (PM2.5 ) from those emissions to induce oxidative damage in human lung cells in vitro and mutagenicity in 6 strains of Salmonella. The extract had a percentage of extractable organic material (EOM) of 7.0% and increased expression of the heme oxygenase (HMOX1) gene in BEAS-2B cells after exposure for 4 hr at 20 µg of EOM/ml. However, the extract did not alter mitochondrial respiration rate as measured by extracellular flux analysis. The extract was most mutagenic in TA100 +S9, indicative of a role for polycyclic aromatic hydrocarbons (PAHs), reflective of the high concentrations of PAHs in the emissions (1 g/kg of oil consumed). The extract had a mutagenicity emission factor of 1.8 ± 0.1 × 105 revertants/megajoulethermal in TA98 +S9, which was greater than that of diesel exhaust and within an order of magnitude of open burning of wood and plastic. Thus, organics from PM2.5 of burning oil can induce oxidative responses in human airway epithelial cells and are highly mutagenic. Environ. Mol. Mutagen. 58:162-171, 2017. © 2017 Wiley Periodicals, Inc.

Polycyclic Aromatic Hydrocarbons in Fine Particulate Matter Emitted from Burning Kerosene, Liquid Petroleum Gas, and Wood Fuels in Household Cookstoves

This study measures polycyclic aromatic hydrocarbon (PAH) compositions in particulate matter emissions from residential cookstoves. A variety of fuel and cookstove combinations are investigated, including: (i) liquid petroleum gas (LPG), (ii) kerosene in a wick stove, (iii) wood (10 and 30% moisture content on a wet basis) in a forced-draft fan stove, and (iv) wood in a natural-draft rocket cookstove. The wood burning in the natural-draft stove had the highest PAH emissions followed by the wood combustion in the forced-draft stove and kerosene burning. LPG combustion has the highest thermal efficiency (∼57%) and the lowest PAH emissions per unit fuel energy, resulting in the lowest PAH emissions per useful energy delivered (in the unit of megajoule delivered, MJd). Compared with the wood combustion emissions, LPG burning also emits a lower fraction of higher molecular weight PAHs. In rural regions where LPG and kerosene are unavailable or unaffordable, the forced-draft fan stove is expected to be an alternative because its benzo[a]pyrene (B[a]P) emission factor (5.17-8.24 μg B[a]P/MJd) and emission rate (0.522-0.583 μg B[a]P/min) are similar to those of kerosene burning (5.36 μg B[a]P/MJd and 0.452 μg B[a]P/min). Relatively large PAH emission variability for LPG suggests a need for additional future tests to identify the major factors influencing these combustion emissions. These future tests should also account for different LPG fuel formulations and stove burner types.

Implementation Science to Accelerate Clean Cooking for Public Health

Clean cooking has emerged as a major concern for global health and development because of the enormous burden of disease caused by traditional cookstoves and fires. The World Health Organization has developed new indoor air quality guidelines that few homes will be able to achieve without replacing traditional methods with modern clean cooking technologies, including fuels and stoves. However, decades of experience with improved stove programs indicate that the challenge of modernizing cooking in impoverished communities includes a complex, multi-sectoral set of problems that require implementation research. The National Institutes of Health, in partnership with several government agencies and the Global Alliance for Clean Cookstoves, has launched the Clean Cooking Implementation Science Network that aims to address this issue. In this article, our focus is on building a knowledge base to accelerate scale-up and sustained use of the cleanest technologies in low- and middle-income countries. Implementation science provides a variety of analytical and planning tools to enhance effectiveness of clinical and public health interventions. These tools are being integrated with a growing body of knowledge and new research projects to yield new methods, consensus tools, and an evidence base to accelerate improvements in health promised by the renewed agenda of clean cooking.

Exposure and size distribution of nitrated and oxygenated polycyclic aromatic hydrocarbons among the population using different household fuels

Polycyclic aromatic hydrocarbons (PAHs) derivatives like nitrated and oxygenated PAHs are of growing concerns because of considerably higher toxicity and important roles during atmospheric chemical reactions. Residential solid fuel combustion is likely to be one large primary source of these pollutants in developing countries. In this study, inhalation exposure to nitrated and oxygenated PAH derivatives was evaluated among rural residents using carried samplers. The exposure levels of individual nitrated PAHs ranged from 4.04 (9-nitrated phenanthrene) to 89.8 (9-nitrated anthracene) pg/m(3), and of oxy-PAHs were 0.570 (benzo[a]anthracene-7, 12-dione) to 7.99 (Benzanthrone) ng/m(3), generally higher in wood user than that in anthracite user. A majority of derivatives in particle presented in PM2.5 (80% for nitrated naphthalene and over 90% for other targets) and even fine PM1.0. Mass fractions of PAH derivatives in fine and ultra-fine particles were significantly higher than the fractions of corresponding parent PAHs, indicating more adverse health outcomes induced by these derivatives. The inhalation exposure levels for residents adopting wood gasifier burners was significantly lower than the documented results for those burning wood in typical built-in brick stoves, and comparable to those using LPG and electricity, which provided vital information for clean stove development and intervention programs.