A Rational Engineering Strategy for Designing Protein A-Binding Camelid Single-Domain Antibodies

Evaluation of mild pH elution protein A resins for antibodies and Fc-fusion proteins

Protein A affinity chromatography is widely used as a capture step for monoclonal antibodies (mAb) and molecules that possess an Fc-domain, such as fusion proteins and bispecific antibodies. However, the use of low pH (3.0-4.0) to elute the molecule and achieve acceptable yield (>85 %) can lead to product degradation (e.g. fragmentation, aggregation) for molecules sensitive to low pH. In this paper, we describe a comprehensive evaluation of two protein A resins with ligands designed to elute at a milder pH as a result of modified sequences in their Fc and VH3 binding regions. One of the evaluated resins has been made commercially available by Purolite and named Praesto Jetted A50 HipH. Results demonstrated that Jetted A50 HipH could elute the Fc-fusion protein and most mAbs evaluated with an elution pH at or above 4.6. Elution and wash optimization determined run conditions for high recovery (>90 % monomer yield), reduction of high molecular weight (HMW) species (>50 %), and significant host cell protein (HCP) clearance at the mildest elution pH possible. For a pH-stable mAb and a pH-sensitive fusion protein, cell culture material was purified with optimized conditions and demonstrated the mild elution pH resins' ability to purify product with acceptable yield, comparable or better impurity clearance, and significantly milder native eluate pH compared to traditional resins. The benefits of the mild elution pH resins were clearly exemplified for the pH-sensitive protein, where a milder elution buffer and native eluate pH resulted in only 2 % HMW in the eluate that remained stable over 48 h. In contrast, a traditional protein A resin requiring low pH elution led to eluate HMW levels of 8 %, which increased to 16 % over the same hold time. Additionally, these resins have high dynamic binding capacity and allow the use of traditional HCP washes. Therefore, Jetted A50 HipH is an ideal candidate for a platform protein A resin and provides flexibility for pH-sensitive proteins and stable mAbs, while preserving product quality, recovery, and seamless integration into a downstream process.

Functional integration of protein A binding ability to antibody fragments for convenient and tag-free purification

Although the development of small therapeutic antibodies is important, the affinity tags used for their purification often result in heterogeneous production and immunogenicity. In this study, we integrated Staphylococcus aureus protein A (SpA) binding ability into antibody fragments for convenient and tag-free purification. SpA affinity chromatography is used as a global standard purification method for conventional antibodies owing to its high binding affinity to the Fc region. SpA also has a binding affinity for some variable heavy domains (VH) classified in the VH3 subfamily. Through mutagenesis based on alignment and structural modeling results using the SpA-VH3 cocrystal structure, we integrated the SpA-binding ability into the anti-CD3 single-chain Fv. Furthermore, we applied this mutagenesis approach to more complicated small bispecific antibodies and successfully purified the antibodies using SpA affinity chromatography. The antibodies retained their biological function after purification. Integration of SpA-binding ability into conventional antibody fragments simplifies the purification and monitoring of the production processes and, thus, is an ideal strategy for accelerating the development of small therapeutic antibodies. Furthermore, because of its immunoactivity, the anti-CD3 variable region with SpA-binding ability is an effective building block for developing engineered cancer therapeutic antibodies without the Fc region.

Recent Developments in Bioprocessing of Recombinant Antibody Fragments

Biotechnological and biomedical applications of antibodies have been on a steady rise since the 1980s. As unique and highly specific bioreagents, monoclonal antibodies (mAbs) have been widely exploited and approved as therapeutic agents. However, the use of mAbs has limitations for therapeutic applications. Antibody fragments (AbFs) with preserved antigen-binding sites have a significant potential to overcome the disadvantages of conventional mAbs, such as heterogeneous tissue distribution after systemic administration, especially in solid tumors, and Fc-mediated bystander activation of the immune system. AbFs possess better biodistribution coefficient due to lower molecular weight. They preserve the functional features of mAbs, such as antigen specificity and binding, while at the same time, ensuring much better tissue penetration. An additional benefit of AbFs is the possibility of their production in bacterial and yeast cells due to the small size, more robust structure, and lack of posttranslational modifications. In this review, we described current approaches to the AbF production with recent examples of AbF synthesis in bacterial and yeast expression systems and methods for the production optimization.

Solvated interaction energy: from small-molecule to antibody drug design

Scoring functions are ubiquitous in structure-based drug design as an aid to predicting binding modes and estimating binding affinities. Ideally, a scoring function should be broadly applicable, obviating the need to recalibrate and refit its parameters for every new target and class of ligands. Traditionally, drugs have been small molecules, but in recent years biologics, particularly antibodies, have become an increasingly important if not dominant class of therapeutics. This makes the goal of having a transferable scoring function, i.e., one that spans the range of small-molecule to protein ligands, even more challenging. One such broadly applicable scoring function is the Solvated Interaction Energy (SIE), which has been developed and applied in our lab for the last 15 years, leading to several important applications. This physics-based method arose from efforts to understand the physics governing binding events, with particular care given to the role played by solvation. SIE has been used by us and many independent labs worldwide for virtual screening and discovery of novel small-molecule binders or optimization of known drugs. Moreover, without any retraining, it is found to be transferrable to predictions of antibody-antigen relative binding affinities and as accurate as functions trained on protein-protein binding affinities. SIE has been incorporated in conjunction with other scoring functions into ADAPT (Assisted Design of Antibody and Protein Therapeutics), our platform for affinity modulation of antibodies. Application of ADAPT resulted in the optimization of several antibodies with 10-to-100-fold improvements in binding affinity. Further applications included broadening the specificity of a single-domain antibody to be cross-reactive with virus variants of both SARS-CoV-1 and SARS-CoV-2, and the design of safer antibodies by engineering of a pH switch to make them more selective towards acidic tumors while sparing normal tissues at physiological pH.

Brain Delivery of IGF1R5, a Single-Domain Antibody Targeting Insulin-like Growth Factor-1 Receptor

The ability of drugs and therapeutic antibodies to reach central nervous system (CNS) targets is greatly diminished by the blood–brain barrier (BBB). Receptor-mediated transcytosis (RMT), which is responsible for the transport of natural protein ligands across the BBB, was identified as a way to increase drug delivery to the brain. In this study, we characterized IGF1R5, which is a single-domain antibody (sdAb) that binds to insulin-like growth factor-1 receptor (IGF1R) at the BBB, as a ligand that triggers RMT and could deliver cargo molecules that otherwise do not cross the BBB. Surface plasmon resonance binding analyses demonstrated the species cross-reactivity of IGF1R5 toward IGF1R from multiple species. To overcome the short serum half-life of sdAbs, we fused IGF1R5 to the human (hFc) or mouse Fc domain (mFc). IGF1R5 in both N- and C-terminal mFc fusion showed enhanced transmigration across a rat BBB model (SV-ARBEC) in vitro. Increased levels of hFc-IGF1R5 in the cerebrospinal fluid and vessel-depleted brain parenchyma fractions further confirmed the ability of IGF1R5 to cross the BBB in vivo. We next tested whether this carrier was able to ferry a pharmacologically active payload across the BBB by measuring the hypothermic and analgesic properties of neurotensin and galanin, respectively. The fusion of IGF1R5-hFc to neurotensin induced a dose-dependent reduction in the core temperature. The reversal of hyperalgesia by galanin that was chemically linked to IGF1R5-mFc was demonstrated using the Hargreaves model of inflammatory pain. Taken together, our results provided a proof of concept that appropriate antibodies, such as IGF1R5 against IGF1R, are suitable as RMT carriers for the delivery of therapeutic cargos for CNS applications.

Antithrombotic potential of a single-domain antibody enhancing the activated protein C-cofactor activity of protein S

BACKGROUND

Protein S (PS) is a natural anticoagulant acting as a cofactor for activated protein C (APC) in the proteolytic inactivation of activated factors V (FVa) and VIII (FVIIIa), but also for tissue factor pathway inhibitor α (TFPIα) in the inhibition of activated factor X (FXa).

OBJECTIVE

For therapeutic purposes, we aimed at generating single-domain antibodies (sdAbs) that could specifically modulate the APC-cofactor activity of PS in vivo.

METHODS

A llama-derived immune library of sdAbs was generated and screened on recombinant human PS by phage display. PS binders were tested in a global activated partial thromboplastin time (APTT)-based APC-cofactor activity assay.

RESULTS

A PS-specific sdAb (PS003) was found to enhance the APC-cofactor activity of PS in our APTT-based assay, and this enhancing effect was greater for a bivalent form of PS003 (PS003biv). Further characterization of PS003biv demonstrated that PS003biv also enhanced the APC-cofactor activity of PS in a tissue factor (TF)-induced thrombin generation assay and stimulated APC in the inactivation of FVa, but not FVIIIa, in plasma-based assays. Furthermore, PS003biv was directed against the sex hormone-binding globulin (SHBG)-like domain but did not inhibit the binding of PS to C4b-binding protein (C4BP) and did not interfere with the TFPIα-cofactor activity of PS. In mice, PS003biv exerted an antithrombotic effect in a FeCl3 -induced thrombosis model, while not affecting physiological hemostasis in a tail-clip bleeding model.

DISCUSSION

Altogether, these results showed that pharmacological enhancement of the APC-cofactor activity of PS through an original anti-PS sdAb might constitute a promising and safe antithrombotic strategy.

Camelid Single-Domain Antibodies: Promises and Challenges as Lifesaving Treatments

Since the discovery of camelid heavy-chain antibodies in 1993, there has been tremendous excitement for these antibody domains (VHHs/sdAbs/nanobodies) as research tools, diagnostics, and therapeutics. Commercially, several patents were granted to pioneering research groups in Belgium and the Netherlands between 1996–2001. Ablynx was established in 2001 with the aim of exploring the therapeutic applications and development of nanobody drugs. Extensive efforts over two decades at Ablynx led to the first approved nanobody drug, caplacizumab (Cablivi) by the EMA and FDA (2018–2019) for the treatment of rare blood clotting disorders in adults with acquired thrombotic thrombocytopenic purpura (TPP). The relatively long development time between camelid sdAb discovery and their entry into the market reflects the novelty of the approach, together with intellectual property restrictions and freedom-to-operate issues. The approval of the first sdAb drug, together with the expiration of key patents, may open a new horizon for the emergence of camelid sdAbs as mainstream biotherapeutics in the years to come. It remains to be seen if nanobody-based drugs will be cheaper than traditional antibodies. In this review, I provide critical perspectives on camelid sdAbs and present the promises and challenges to their widespread adoption as diagnostic and therapeutic agents.

Cytoplasmic Production of Nanobodies and Nanobody-Based Reagents by Co-Expression of Sulfhydryl Oxidase and DsbC Isomerase

Nanobodies are stable molecules that can often fold correctly even in the absence of the disulfide bond(s) that stabilize their three-dimensional conformation. Nevertheless, some nanobodies require the formation of disulfide bonds, and therefore they are commonly expressed from vectors that promote their secretion into the oxidizing environment of the Escherichia coli periplasm. As an alternative, the bacterial cytoplasm can be an effective compartment for producing correctly folded nanobodies when sulfhydryl oxidase and disulfide-bond isomerase activities are co-expressed from a recombinant vector. The larger volume and wider chaperone/foldase availability of the cytoplasm enable the achievement of high yields of both nanobodies and nanobody-tag fusions, independently of their redox requirements. Among other examples, the protocol described here was used to successfully produce nanobody fusions with fluorescent proteins that do not fold correctly in the periplasm, nanobodies with Fc domains, and nanobodies containing free cysteine tags.

Humanization of Camelid Single-Domain Antibodies

Humanization of therapeutic antibodies derived from animal immunizations is often required to minimize immunogenicity risks in humans, which can cause potentially harmful and serious side effects and reduce antibody efficacy. Humanization is typically applied to conventional monoclonal antibodies derived in rodents as well as single-domain antibodies isolated from camelids and sharks (VHHs and VNARs). A streamlined protocol is described here for sequence humanization of camelid VHHs, which represent a promising biotherapeutic format with many desirable attributes. From human framework selection and complementarity-determining region grafting strategies to empirical scoring for prioritization of back-mutations, step-by-step instructions, and templates are provided along with bioinformatics resources to assist each step of the humanization process. Alternative approaches, warnings, and caveats are also presented.

Redesigning an antibody H3 loop by virtual screening of a small library of human germline-derived sequences

The design of superior biologic therapeutics, including antibodies and engineered proteins, involves optimizing their specific ability to bind to disease-related molecular targets. Previously, we developed and applied the Assisted Design of Antibody and Protein Therapeutics (ADAPT) platform for virtual affinity maturation of antibodies (Vivcharuk et al. in PLoS One 12(7):e0181490, 10.1371/journal.pone.0181490, 2017). However, ADAPT is limited to point mutations of hot-spot residues in existing CDR loops. In this study, we explore the possibility of wholesale replacement of the entire H3 loop with no restriction to maintain the parental loop length. This complements other currently published studies that sample replacements for the CDR loops L1, L2, L3, H1 and H2. Given the immense sequence space theoretically available to H3, we focused on the virtual grafting of over 5000 human germline-derived H3 sequences from the IGMT/LIGM database increasing the diversity of the sequence space when compared to using crystalized H3 loop sequences. H3 loop conformations are generated and scored to identify optimized H3 sequences. Experimental testing of high-ranking H3 sequences grafted into the framework of the bH1 antibody against human VEGF-A led to the discovery of multiple hits, some of which had similar or better affinities relative to the parental antibody. In over 75% of the tested designs, the re-designed H3 loop contributed favorably to overall binding affinity. The hits also demonstrated good developability attributes such as high thermal stability and no aggregation. Crystal structures of select re-designed H3 variants were solved and indicated that although some deviations from predicted structures were seen in the more solvent accessible regions of the H3 loop, they did not significantly affect predicted affinity scores.

Incorporation of a Novel CD16-Specific Single-Domain Antibody into Multispecific Natural Killer Cell Engagers With Potent ADCC

Multispecific antibodies that bridge immune effector and tumor cells have shown promising preclinical and clinical efficacies. Here, we isolated and characterized novel llama single-domain antibodies (sdAbs) against CD16. One sdAb, NRC-sdAb048, bound recombinant human and cynomolgus monkey CD16 ectodomains with equivalent affinity (K_D: 1 nM) but did not recognize murine CD16. Binding was similar for human CD16a expressed on NK cells and CD16b (NA2) expressed on neutrophils but dramatically weaker (K_D: ∼6 μM) for the CD16b (NA1) allotype. The sdAb stained primary human peripheral blood NK cells. Irrespective of fusion orientation and linker length, bispecific sdAb-sdAb and sdAb-scFv dimers (anti-CD16/EGFR, anti-CD16/HER2, and anti-CD16/CD19) retained full binding affinity for each target, coengaged both antigens simultaneously, elicited ADCC against target antigen-expressing tumor cells in a reporter bioassay, and triggered target-specific activation and degranulation of primary NK cells as measured via interferon-γ and CD107a expression. These molecules may have applications in cancer immunotherapy.

Development of a platform process for the production and purification of single-domain antibodies

Single‐domain antibodies (sdAbs) offer the affinity and therapeutic value of conventional antibodies, with increased stability and solubility. Unlike conventional antibodies, however, sdAbs do not benefit from a platform manufacturing process. While successful production of a variety of sdAbs has been shown in numerous hosts, purification methods are often molecule specific or require affinity tags, which generally cannot be used in clinical manufacturing due to regulatory concerns. Here, we have developed a broadly applicable production and purification process for sdAbs in Komagataella phaffii (Pichia pastoris) and demonstrated the production of eight different sdAbs at a quality appropriate for nonclinical studies. We developed a two‐step, integrated purification process without the use of affinity resins and showed that modification of a single process parameter, pH of the bridging buffer, was required for the successful purification of a variety of sdAbs. Further, we determined that this parameter can be predicted based only on the biophysical characteristics of the target molecule. Using these methods, we produced nonclinical quality sdAbs as few as 5 weeks after identifying the product sequence. Nonclinical studies of three different sdAbs showed that molecules produced using our platform process conferred protection against viral shedding of rotavirus or H1N1 influenza and were equivalent to similar molecules produced in Escherichia coli and purified using affinity tags.

Rational design of affinity ligands for bioseparation

Affinity adsorbents have been the cornerstone in protein purification. The selective nature of the molecular recognition interactions established between an affinity ligands and its target provide the basis for efficient capture and isolation of proteins. The plethora of affinity adsorbents available in the market reflects the importance of affinity chromatography in the bioseparation industry. Ligand discovery relies on the implementation of rational design techniques, which provides the foundation for the engineering of novel affinity ligands. The main goal for the design of affinity ligands is to discover or improve functionality, such as increased stability or selectivity. However, the methodologies must adapt to the current needs, namely to the number and diversity of biologicals being developed, and the availability of new tools for big data analysis and artificial intelligence. In this review, we offer an overview on the development of affinity ligands for bioseparation, including the evolution of rational design techniques, dating back to the years of early discovery up to the current and future trends in the field.

Role of the non-hypervariable FR3 D-E loop in single-domain antibody recognition of haptens and carbohydrates

Single-domain antibodies (sdAbs), the variable domains of camelid heavy chain-only antibodies, are generally thought to poorly recognize nonproteinaceous small molecules and carbohydrates in comparison with conventional antibodies. However, the structures of anti-methotrexate, anti-triclocarban and anti-cortisol sdAbs revealed unexpected contributions of the non-hypervariable "CDR4" loop, formed between β-strands D and E of framework region 3, in binding. Here, we investigated the potential role of CDR4 in sdAb binding to a hapten, 15-acetyl-deoxynivalenol (15-AcDON), and to carbohydrates. We constructed and panned a phage-displayed library in which CDR4 of the 15-AcDON-specific sdAb, NAT-267, was extended and randomized. From this library, we identified one sdAb, MA-232, bearing a 14-residue insertion in CDR4 and showing improved binding to 15-AcDON by ELISA and surface plasmon resonance. On the basis of these results, we constructed a second set of phage-displayed libraries in which the CDR4 and other regions of three hapten- or carbohydrate-binding sdAbs were diversified. With the goal of identifying sdAbs with novel glycan-binding specificities, we panned the library against four tumor-associated carbohydrate antigens but were unable to enrich binding phages. Thus, we conclude that while CDR4 may play a role in binding of some rare hapten-specific sdAbs, diversifying this region through molecular engineering is probably not a general solution to sdAb carbohydrate recognition in the absence of a paired V_L domain.

Llama peripheral B-cell populations producing conventional and heavy chain-only IgG subtypes are phenotypically indistinguishable but immunogenetically distinct

Camelid ungulates produce homodimeric heavy chain-only antibodies (HCAbs) in addition to conventional antibodies consisting of paired heavy and light chains. In the llama, HCAbs are made up by at least two subclasses (long-hinge IgG2b and short-hinge IgG2c HCAbs vs. conventional heterotetrameric IgG1s). Here, we generated murine monoclonal antibodies (mAbs) specific for the hinge-C_H2 boundary of llama IgG2b (mAb 1C10) and the Fc of llama IgG2c HCAbs (mAb 5E4). Flow cytometric analysis of llama peripheral blood lymphocytes revealed that IgG1⁺, IgG2b⁺ and IgG2c⁺ B cells could be distinguished using mAbs 1C10/5E4 but had equivalent expression of three other cell-surface markers. MiSeq sequencing of the peripheral B cell repertoires of three llamas showed that (i) IgG2b and IgG2c HCAbs were present in similar proportions in the repertoire, (ii) a subset of IgG2b and IgG2c HCAbs, but not IgG1s, entirely lacked a hinge exon and showed direct V_HH-C_H2 splicing; these "hingeless" HCAbs were clonally expanded, somatically mutated and derived from hinged HCAb precursors, (iii) substantial repertoire overlap existed between IgG subclasses, especially between IgG2b and IgG2c HCAbs, (iv) the complementarity-determining region (CDR)-H3 length distributions of IgG2b and IgG2c HCAbs were broader and biased towards longer lengths compared with IgG1s due to increased N-nucleotide addition, (v) IgG2b and IgG2c HCAbs used a more restricted set of IGHV genes compared with IgG1s, and (vi) IgG2b and IgG2c HCAbs had elevated somatic mutations rates of both CDRs and framework regions (FRs) compared with IgG1s, especially of CDR-H1 and FR3. The distinct molecular features of llama IgG1, IgG2b and IgG2c antibodies imply that these subclasses may have divergent immunological functions and suggest that specific mechanisms operate to diversify HCAb repertoires in the absence of a light chain.

Evaluation of a noncanonical Cys40-Cys55 disulfide linkage for stabilization of single-domain antibodies

Incorporation of noncanonical disulfide linkages into single-domain antibodies (sdAbs) has been shown to enhance thermostability and other properties. Here, we evaluated the effects of introducing a novel disulfide linkage formed between Cys residues at IMGT positions 40 and 55 on the melting temperatures (T _m s), reversibility of thermal unfolding, solubility, and antigen-binding affinities of three types of sdAbs (V_H H, V_H , and V_L domains). The Cys40-Cys55 disulfide linkage was tolerated by 9/9 V_H Hs, 12/12 V_H s, and 2/11 V_L s tested and its formation was confirmed by mass spectrometry. Using circular dichroism, we found that the Cys40-Cys55 disulfide linkage increased sdAb T _m by an average of 10.0°C (range: 0-21.8°C). However, enhanced thermostability came at the cost of a partial loss of refolding ability upon thermal denaturation as well as, for some sdAbs, significantly decreased solubility and antigen-binding affinity. Thus, Cys40/Cys55 can be added to the panel of known locations for introducing stabilizing noncanonical disulfide linkages into antibody variable domains, although its effects should be tested empirically for individual sdAbs.

Stability-Diversity Tradeoffs Impose Fundamental Constraints on Selection of Synthetic Human VH/VL Single-Domain Antibodies from In Vitro Display Libraries

Human autonomous V_H/V_L single-domain antibodies (sdAbs) are attractive therapeutic molecules, but often suffer from suboptimal stability, solubility and affinity for cognate antigens. Most commonly, human sdAbs have been isolated from in vitro display libraries constructed via synthetic randomization of rearranged V_H/V_L domains. Here, we describe the design and characterization of three novel human V_H/V_L sdAb libraries through a process of: (i) exhaustive biophysical characterization of 20 potential V_H/V_L sdAb library scaffolds, including assessment of expression yield, aggregation resistance, thermostability and tolerance to complementarity-determining region (CDR) substitutions; (ii) in vitro randomization of the CDRs of three V_H/V_L sdAb scaffolds, with tailored amino acid representation designed to promote solubility and expressibility; and (iii) systematic benchmarking of the three V_H/V_L libraries by panning against five model antigens. We isolated ≥1 antigen-specific human sdAb against four of five targets (13 V_Hs and 7 V_Ls in total); these were predominantly monomeric, had antigen-binding affinities ranging from 5 nM to 12 µM (average: 2–3 µM), but had highly variable expression yields (range: 0.1–19 mg/L). Despite our efforts to identify the most stable V_H/V_L scaffolds, selection of antigen-specific binders from these libraries was unpredictable (overall success rate for all library-target screens: ~53%) with a high attrition rate of sdAbs exhibiting false positive binding by ELISA. By analyzing V_H/V_L sdAb library sequence composition following selection for monomeric antibody expression (binding to protein A/L followed by amplification in bacterial cells), we found that some V_H/V_L sdAbs had marked growth advantages over others, and that the amino acid composition of the CDRs of this set of sdAbs was dramatically restricted (bias toward Asp and His and away from aromatic and hydrophobic residues). Thus, CDR sequence clearly dramatically impacts the stability of human autonomous V_H/V_L immunoglobulin domain folds, and sequence-stability tradeoffs must be taken into account during the design of such libraries.

A disulfide-stabilized human VL single-domain antibody library is a source of soluble and highly thermostable binders

We have previously shown that incorporation of a second intradomain disulfide linkage into camelid V_HH and human V_H/V_L single-domain antibodies confers increased thermostability. Here, we explored the effects of introducing an additional disulfide linkage, formed between Cys48 and Cys64 (Kabat numbering), into a phage-displayed synthetic human V_L library. In comparison to an identical library bearing only the highly conserved Cys23-Cys88 disulfide linkage, the disulfide-stabilized V_L library tolerated a similar degree of randomization but retained a higher level of functional diversity after selection with protein L. Both libraries yielded soluble, antigen-specific V_Ls that recognized a model antigen (maltose-binding protein) with similar affinities, in the micromolar range; however, the disulfide-stabilized antigen-specific V_Ls were much more thermostable (average ΔT_m ∼10°C) than non-disulfide-stabilized V_Ls. This work provides proof-of-concept for building synthetic antibody libraries using disulfide-constrained immunoglobulin domains, thus avoiding pitfalls of post-hoc disulfide linkage engineering such as impaired antigen binding and reduced expression yield.