Efficient removal of Pb(II) from aqueous solution by a novel ion imprinted magnetic biosorbent: Adsorption kinetics and mechanisms

Preparation of Nitrogen-Doped Biochar and Its Adsorption Performance for Cr6+ and Pb2+ in Aqueous Systems

Toxicity and pollution of heavy metals in water environments are very serious threats, and how to efficiently remove heavy metals is a difficult problem in water ecosystems. This study takes Cr and Pb as examples to study the adsorption effects of different types of modified biochar on these two heavy metals and their influencing mechanisms, with the aim of providing precise treatment schemes for water ecological health. Biochar was prepared from apricot branches, apricot shells, and corn stalks through nitrogen doping modification, and its structure and properties were characterized and analyzed. Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were employed to investigate the microstructure and surface chemical characteristics of the biochar. Adsorption experiments were conducted to evaluate its removal efficiency for Cr6+ and Pb2+ from aqueous solutions. The results showed that nitrogen-doped biochar prepared from corn stalks at 600 °C exhibited the highest Cr6+ adsorption rate of 81.09%, while the biochar prepared at 500 °C demonstrated the highest Pb2+ adsorption rate of 91.61%. Comparative analysis of FTIR and SEM data between nitrogen-doped biochar and its original counterparts revealed the underlying adsorption mechanisms, which involve a synergistic effect of coordination interaction, electrostatic attraction, and chemical reduction. This study highlights nitrogen-doped biochar as an efficient and cost-effective material for the removal of heavy metal ions from aqueous environments. It also provides theoretical and practical insights into the resource utilization of agricultural waste and the management of water pollution.

Sustainable Pb(II) Removal and Recovery from Wastewater Using a Bioinspired Metal-Phenolic Hybrid Membrane with Efficient Regeneration

High-performance adsorbents often require efficient selectivity in wastewater, recoverability, and ease of multiple regeneration cycles, but achieving this remains a significant challenge. We report a new strategy for the efficient removal of lead (Pb(II)) from contaminated water streams using an innovative tannic acid (TA)-Fe(III)-based metal-phenolic network (MPN) hybrid membrane (MPN-PAM). This novel membrane exploits the tunable pH-sensitive coordination structure of the MPN to achieve selective removal and recovery of Pb(II) while enabling efficient membrane regeneration by filtration. This membrane demonstrates superior selectivity for Pb(II) with a removal efficiency of up to 98 % and an adsorption capacity of approximately 117.58 mg/g, even in the presence of high salinity, as well as coexisting heavy metals. The membrane maintains high Pb(II) removal efficiency over 20 consecutive cycles and 95 % efficiency over 10 regeneration cycles. Under continuous operation, it treats approximately 85 L per m2 of membrane, reducing Pb(II) concentrations to trace levels (~40 μg/L), meeting electroplating wastewater standard (GB21900-2008). Additionally, even low concentrations of Pb(II) (<5 mg/L) are efficiently purified to below WHO drinking water standard (10 μg/L). The operational cost for treating Pb(II)-contaminated wastewater is about $0.13 per ton, highlighting the cost-effectiveness and potential for large-scale application in wastewater treatment.

Chitosan: A Green Approach to Metallic Nanoparticle/Nanocomposite Synthesis and Applications

Chitosan, a naturally occurring biopolymer derived from chitin, has emerged as a highly promising instrument for the production and application of metal nanoparticles. The present review delves into the several functions of chitosan in the development and operation of metal nanoparticles, emphasizing its aptitudes as a green reducing agent, shape-directing agent, size-controlling agent, and stabilizer. Chitosan's special qualities make it easier to manufacture metal nanoparticles and nanocomposites with desired characteristics. Furthermore, there is a lot of promise for chitosan-based nanocomposites in a number of fields, such as metal removal, water purification, and photoacoustic, photothermal, antibacterial, and photodynamic therapies. This thorough analysis highlights the potential application of chitosan in the advancement of nanotechnology and the development of medicinal and environmental solutions.

Application Prospect of Ion-Imprinted Polymers in Harmless Treatment of Heavy Metal Wastewater

With the rapid development of industry, the discharge of heavy metal-containing wastewater poses a significant threat to aquatic and terrestrial environments as well as human health. This paper provides a brief introduction to the basic principles of ion-imprinted polymer preparation and focuses on the interaction between template ions and functional monomers. We summarized the current research status on typical heavy metal ions, such as Cu(II), Ni(II), Cd(II), Hg(II), Pb(II), and Cr(VI), as well as metalloid metal ions of the As and Sb classes. Furthermore, it discusses recent advances in multi-ion-imprinted polymers. Finally, the paper addresses the challenges faced by ion-imprinted technology and explores its prospects for application.

Preparation and characterization of CS/PAT/ MWCNT@MgAl-LDHs nanocomposite for Cd2+ removal and 4-nitrophenol reduction

The present study evaluated the performance of multiwalled carbon nanotube (MWCNT)@MgAl-layered double hydroxide (LDH) nanoparticles loaded on poly-2 aminothiazole (PAT)/chitosan (CS) matrix (CPML) to remove Cd2+ ions from aqueous solution. The removal efficiency of modified CS/PAT with MWCNT@MgAl-LDHs was increased significantly compared to pure CS/PAT. The influence of heavy metal ion concentration, pH, temperature, adsorbent dosage, and contact time on the adsorption was examined. The optimum conditions for the adsorption of Cd2+ ions were 25 0C with the adsorbent dosage of 0.06 g and initial concentration for adsorption of the Cd2+ 100 mg/L at pH = 8. The maximum adsorption capacity was measured to be 1106.19 mg/g. The values of thermodynamic parameters namely Gibbs free energy (ΔG°), entropy change (ΔS°), and enthalpy change (ΔH°) indicated the feasibility, spontaneity and the endothermic nature of the adsorption process, respectively. The pseudo-second-order kinetics and the Langmuir model were selected as the best models for the adsorption process. Also, CPML nanocomposite (NC) was successfully tested for p-nitrophenol (p-NP) reduction in the presence of NaBH4. The reaction was nearly completed in 6 min. The fabricated CPML-NC could be reused for three consecutive cycles.

Evaluation of the lead and chromium removal capabilities of Bacillus subtilis-induced food waste compost-based biomedia

Food waste compost (FWC) is a sustainable recycling approach employed in soil media, offering extensive advantages to urban areas by promoting resource circulation and effectively managing water pollution. To improve value, Bacillus subtilis (B. subtilis)-induced FWC-based biomedia (BIBMFWCs) was produced via a secondary treatment involving selective meso-thermophilic stages. During the production of BIBMFWCs, physicochemical properties were found to have favorable characteristics for the efficient removal of metal ions. The produced organic-carbonate complex structure demonstrated the synergistic effect involving simultaneous sorption/precipitation mechanisms for the removal of Pb(II) and Cr(III). Also, the dose of B. subtilis has an impact on the pseudo-second-order (PSO) and intra-particle diffusion (IPD) reaction, leading to distinct removal capacities for Pb(II) and Cr(III) [24.26-24.74 mg g-1 in Pb(II) and 12.7-23.93 mg g-1 in Cr(III)]. Furthermore, B. subtilis, an inducing mediator for microbial metabolites, exhibits the potential to facilitate the removal of Pb(II) and Cr(III) through biological modification of raw materials, which are transformed, facilitating the presence of hydroxyl groups, immobilizing metal ions, and enabling ion exchange via biogenic carbonate formation processes. Finally, the developed BIBMFWCs could be used as a nature-based solution (NBS) material without in-situ pH control.

Development of Novel PET-PAN Electrospun Nanocomposite Membrane Embedded with Layered Double Hydroxides Hybrid for Efficient Wastewater Treatment

Layered double hydroxides (LDHs) with their unique structural chemistry create opportunities to be modified with polymers, making different nanocomposites. In the current research, a novel PET-PAN embedded with Mg-AI-LDH-PVA nanocomposite membrane was fabricated through electrospinning. SEM, EDX, FTIR, XRD, and AFM were carried out to investigate the structure and morphology of the nanocomposite membrane. The characterization of the optimized nanocomposite membrane showed a beadless, smooth structure with a nanofiber diameter of 695 nm. The water contact angle and tensile strength were 16° and 1.4 Mpa, respectively, showing an increase in the hydrophilicity and stability of the nanocomposite membrane by the addition of Mg-Al-LDH-PVA. To evaluate the adsorption performance of the nanocomposite membrane, operating parameters were achieved for Cr(VI) and methyl orange at pH 2.0 and pH 4.0, respectively, including contact time, adsorbate dose, and pollutant concentration. The adsorption data of the nanocomposite membrane showed the removal of 68% and 80% for Cr(VI) and methyl orange, respectively. The process of adsorption followed a Langmuir isotherm model that fit well and pseudo-2nd order kinetics with R2 values of 0.97 and 0.99, respectively. The recycling results showed the membrane's stability for up to five cycles. The developed membrane can be used for efficient removal of pollutants from wastewater.

Construction of 1, 10-phenanthroline functionalized magnetic starch as a lead (II) tagged surface imprinted biopolymer for highly selective targeting of toxic lead ions

In this research 1, 10 - phenanthroline functionalized CaFe₂O₄ - starch was employed as a magnetic ion-imprinted polymer (IIP) for highly selective targeting toxic Pb²⁺ ions from aqueous media. VSM analysis revealed that the sorbent has magnetic saturation of 10 emu g^-1 which is appropriate for magnetic separation. Moreover, TEM analysis confirmed that the adsorbent is composed of particles with a mean diameter of 10 nm. According to XPS analysis, lead coordination with phenanthroline is the main adsorption mechanism that is along with electrostatic interaction. A maximum adsorption capacity of 120 mg g^-1 was obtained within 10 min at a pH of 6 and an adsorbent dosage of 20 mg. Kinetic and isotherm studies showed that lead adsorption followed the pseudo-second-order and Freundlich models, respectively. The selectivity coefficient of Pb (II) relative to Cu(II), Co(II), Ni(II), Zn(II), Mn(II), and Cd(II) was 4.7, 14, 20, 36, 13 and 25, respectively. Moreover, the IIP represents the imprinting factor of 1.32. The sorbent showed good regeneration after five cycles of the sorption/desorption process with an efficiency of >93 %. Finally represented IIP was used for lead preconcentration from various matrices i.e., water, vegetable, and fish samples.

New ion-imprinted polymer for selective removal of Cu2+ ion in aqueous solution using extracted Aloe vera leaves as a monomer

The objective of this project is to create a unique type of polymer known as an ion imprinted polymer (IIP) and a non-imprinted polymer (NIP) utilizing natural waste biosorbent materials. One example of this type of waste is Aloe vera, a plant with many medicinal uses that is grown globally. Aloe vera is considered one of the most valuable medicinal plants with a wide range of applications. Extracted Aloe vera was used as functional monomers for the first time to prepare new IIPs, epichlorohydrin, and Cu²⁺ ion as the cross-linking agent and template, respectively. The NIP was also synthesized for comparison, without the use of the Cu²⁺ salt. Following polymerization, the IIP particles were cleansed of template ions through a 0.1 M EDTA leaching process, resulting in the formation of cavities within the particles, these cavities in the polymer provide selective linking zones for these specific template ions. The synthesized IIPs were characterized using the most recent identification instruments. The experimental parameters for adsorption, such as pH of a solution, contact time, initial copper concentration, adsorbent dosage, and temperature have been optimized. The most effective conditions for metal adsorption onto the ionic imprinted polymer were found to be a pH of 8.0, a temperature of 30 °C, a concentration of 0.03 g/100 mL, and a contact time of 50 min. Based on the ANOVA statistical value, the adsorption of Cu²⁺ ion on IIP is significant with very low probability (p) values (<0.001). The Langmuir isotherm model and a second-order reaction were both used in the adsorption process. According to thermodynamic characteristics, Cu²⁺ adsorption over IIPs and NIP was an endothermic, spontaneous process. Compared to NIP, the imprinted polymer exhibits a significantly better capacity and selectivity for Cu²⁺ adsorption, the maximum removal percentage of IIPs and NIP was 96.02 % and 74.3 % respectively. Moreover, the research showed that ion imprinting can be a promising technique for preparing selective adsorbents to separate and preconcentrate metal in a medium of multiple competitive metals (Co²⁺, Cd²⁺, Ni²⁺, Zn²⁺, Fe²⁺, and Pb²⁺) The most important point for this new Cu²⁺-IIPs was shown superior reusability up to 8 cycles with small decrees in uptake capability.

Amino-modified chitosan/gold tailings composite for selective and highly efficient removal of lead and cadmium from wastewater

In this work, a novel amino-modified chitosan/tailings composite (CS-PEI-nGT) was successfully synthesized from gold tailings particle treated by ball milling (nGT), chitosan (CS) and polyethyleneimine (PEI) as raw materials, for Lead (Pb(Ⅱ)) and Cadmium (Cd(Ⅱ)) removal from aqueous solutions. The CS-PEI-nGT was characterized by using FTIR, XRD, SEM, BET, TGA and XPS techniques. The results showed that CS-PEI-nGT had maximum adsorption capacity of 192.78 mg·g^-1 and 99.46 mg·g^-1 for Pb(Ⅱ) and Cd(Ⅱ) respectively at pH 5. The adsorption kinetics was described well by pseudo-second-order kinetic adsorption model, and suggested that chemisorption as the rate-controlling step for adsorption of Pb(Ⅱ) and Cd(Ⅱ). The isotherm data was accurately explained by Langmuir model with higher correlation coefficient (R²) of 0.9911 and 0.9642 for Pb(Ⅱ) and Cd(Ⅱ) respectively. In addition, CS-PEI-nGT retained its selective adsorption capacity for Pb(Ⅱ) and Cd(Ⅱ), compared to other metals such as Zn(Ⅱ), Mn(Ⅱ), Mg(Ⅱ) and Al(Ⅲ). The mechanism of the adsorption was investigated and the results revealed that amino (-NH₂), silicon oxide groups (Si-O) and hydroxyl (-OH) functional groups on composite surface were accountable for metals adsorption, suggesting surface complexation, electrostatic interactions and ion exchange. Our work presents a promising strategy for tailings recycling and highly efficient removal of toxic metals ions from wastewater.

Simultaneous removal of lead, manganese, and copper released from the copper tailings by a novel magnetic modified biosorbent

Potentially toxic elements including lead (Pb), manganese (Mn), and copper (Cu) released from copper tailings would cause severe long-term environmental risks and potential threats to human health. To prevent these negative effects caused by the release of the metals, a novel magnetic carboxyl groups modified bagasse with high adsorption affinity and strong magnetism was synthesized through an in-situ precipitation method and used to simultaneously remove Pb, Mn, and Cu from the eluate of copper tailings. Results showed that release of Pb, Mn, and Cu from the copper tailings was pH, time, and particle size dependent, and maximum concentrations of them released in the eluate was 1.7, 1.9, and 4.1 mg L^-1 under weak acid conditions. Batch adsorption experiment showed that the as-synthesized magnetic modified bagasse could selectively absorb Pb, Mn, and Cu from a complex solution with adsorption capacity of 137.3, 13.1, and 90.0 mg g^-1, respectively. X-ray photoelectron spectroscopy (XPS) and energy dispersive spectroscopy-mapping (EDS-mapping) demonstrated that Pb, Mn, and Cu interacted with the magnetic modified biosorbent mainly through coordination and ion exchange. Column experiments showed that higher than 99.5% of the released Pb, Mn, and Cu could be simultaneously removed by the magnetic modified bagasse, and the maximum concentrations of them released in the eluate of the copper tailings were all decreased to lower than 0.01 mg L^-1, which reached the discharge standards. After recycled by a magnet, the magnetic modified bagasse could be collected easily and used repeatedly. Because of the high efficiency and easy recovery, the used method had great practical application value in removal of potentially toxic elements released from metallic tailings.

Removal of dyes (BG, MG, and SA) from aqueous solution using a novel adsorbent macrocyclic compound

The use of macrocyclic compounds to remove organic dyes is fascinating because they have a wide surface area range and can be used for different things. new (14E, 34E)-7-Hydroxy-7, 8, 22, 23, 24, 25, 26, 27-Octahydro-6H, 16H, 33H Tetrabenzo[f,k,u,z][1,5,13,20]Tetraoxacycloheptacosine-16,33-Dione (HOTTD) was obtained by a simple high-dilution method, and characterized by FTIR, 1H-NMR, FESEM, EDX, and XRD. It worked well in removing organic dyes from aqueous solutions. Contact time, pH, dosage, initial concentration and temperature were studied. The optimum conditions were achieved by using 20 mg/L dye concentration, 50 mg dose of adsorbent and pH 9.0 at room temperature. The adsorption process was remarkably fast and reached equilibrium within 10 min for both Brilliant Green and Malachite Green while 70 min for Safranin. The batch adsorption experiments followed a pseudo 2nd order and Langmuir model with maximum adsorption capacity 19.26 mg/g, 18.28 mg/g, and 14.35 mg/g for Brilliant Green, Malachite green and Safranin respectively. The process was endothermic and spontaneous in nature. Adsorbent regeneration test provides an excellent value 5 times.

Rapid adsorption of some heavy metals using extracted chitosan anchored with new aldehyde to form a schiff base

A new aldehyde 2,2’-[propane-1,3-diylbis(oxy)] dibenzaldehyde was synthesized from refluxing 2-hydroxy acetophenone and 2-hydroxy 1,3-dichloropropanean in an alcoholic medium. The compositions and properties of the new aldehyde compound were characterized by elemental analysis, FTIR, and nuclear magnetic resonance spectroscopy studies. The extracted chitosan was made to react with a new aldehyde to form a Schiff base by a suitable method. The effects of initial concentration of metal ions, exposure time, imine weight, and pH on the adsorption of Cu(II), Cr(III), and Zn(II) metal ions were examined. An adsorption batch experiment was conducted. The adsorption process followed a second-order reaction and Langmuir model with qe 25 mg/g, 121 mg/g, and 26.31 mg/g for Cu(II), Zn(II), and Cr(III) respectively. The Gibbs free energy showed a negative value and the adsorption/desorption tests provided a high value 5 times.

Highly efficient engineered waste eggshell-fly ash for cadmium removal from aqueous solution

Sustainable waste and water management are key components of the newest EU policy regarding the circular economy. Simple, performant and inexpensive water treatment methods based on reusing waste are prerequisites for human health, sustainable development and environmental remediation. The design of performant, cost-effective absorbents represents a topical issue in wastewater treatment. This study aimed to investigate the development of a newly engineered adsorbent by functionalizing two different types of waste (industrial and food) with magnetic nanoparticles as environmentally friendly, highly efficient, cheap material for cadmium removal from aqueous solutions. This nano-engineered adsorbent (EFM) derived from waste eggshell and fly ash was used to remove the cadmium from the aqueous solution. SEM analysis has demonstrated that magnetite nanoparticles were successfully loaded with each waste. In addition, was obtained a double functionalization of the eggshell particles with ash and magnetite particles. As a result of this, the EFM surface area substantially increased, as confirmed by BET. A comprehensive characterization (BET, FT-IR, SEM, XRD and TGA) was performed to study the properties of this newly engineered adsorbent. Batch experiments were conducted to investigate the influence of different reaction parameters: temperature, pH, contact time, dosage adsorbent, initial concentration. Results showed that cadmium adsorption reached equilibrium in 120 min., at pH 6.5, for 0.25 g of adsorbent. The maximum efficiency was 99.9%. The adsorption isotherms research displayed that the Cd2+ adsorption fitted on the Freundlich model indicated a multi-molecular layer adsorption process. In addition, the thermodynamic study (ΔG < 0, ΔH > 0; ΔS > 0) shows that cadmium adsorption is a spontaneous and endothermic process. The adsorbent kinetic study was described with the pseudo-second-order model indicating a chemisorption mechanism. Desorption results showed that the nano-engineered adsorbent (EFM) can be reused. These data confirmed the possibility to enrich relevant theoretical knowledge in the field of waste recovery for obtaining newly designed adsorbents, performant and inexpensive for wastewater remediation.

Recent advances of chitosan-based polymers in biomedical applications and environmental protection

Interest in polymer-based biomaterials such as chitosan and its modifications and also the methods of their application in various fields of science is uninterruptedly growing. Owing to unique physicochemical, biological, ecological, physiological properties, such as biocompatibility, biodegradability, stability in the natural environment, non-toxicity, high biological activity, economic affordability, chelating of metal ions, high sorption properties, chitosan is used in various biomedical and industrial processes. The reactivity of the amino and hydroxyl groups in the structure makes it more interesting for diverse applications in drug delivery, tissue engineering, wound healing, regenerative medicine, blood anticoagulation and bone, tendon or blood vessel engineering, dentistry, biotechnology, biosensing, cosmetics, water treatment, agriculture. Taking into account the current situation in the world with COVID-19 and other viruses, chitosan is also active in the form of a vaccine system, it can deliver antibodies to the nasal mucosa and load gene drugs that prevent or disrupt the replication of viral DNA/RNA, and deliver them to infected cells. The presented article is an overview of the nowaday state of the application of chitosan, based on literature of recent years, showing importance of fundamental and applied studies aimed to expand application of chitosan-based polymers in many fields of science.

Research progress in the removal of heavy metals by modified chitosan

Chitosan and its modifiers have been widely studied for their good biocompatibility and excellent adsorption properties for heavy metal ions. The synthesis and application of modified chitosan, the effects of process variables (such as pH, amount of adsorbent, temperature, contact time, etc.), adsorption kinetics, thermodynamics and the adsorption mechanism on the removal of heavy metal ions are reviewed. The purpose is to provide the latest information about chitosan as adsorbent and to promote the synthesis of modified chitosan and its application in the removal of heavy metals.

Fabrication and characterization of electrospun zein/nylon-6 (ZN6) nanofiber membrane for hexavalent chromium removal

Zein has drawn attention for its great potential for biodegradability and adsorption of hexavalent chromium Cr(VI) that is a carcinogenic industrial pollutant. Zein is a biopolymer extracted from corn and is used for many purposes, but because of its poor stability in aqueous solution, a novel composite of zein and nylon-6 was used to synthesize a nanofibrous membrane using electrospinning to improve its stability and tensile strength. The scanning electron microscope (SEM) image of the zein/nylon-6 (ZN6) nanofiber membrane showed a smooth, beadless, and continuous structure of the nanofibers, but the Fourier transform infrared (FTIR) spectrum of pristine and Cr(VI) saturated ZN6 showed that peaks of secondary amide, carbonyl, and hydroxyl functional groups were involved in adsorption. Optimized experimental parameters were obtained with pH 2.0, contact time 60 min, adsorbent dosage 25 mg, and adsorbate concentration 5.0 mg Cr-VI/mL. Experimental results show that the ZN6 nanofibers removed 87% Cr(VI) with an adsorption capacity of 4.73 mg/g at ambient temperature. Also, the Langmuir isotherm fits well, and the adsorption process followed a pseudo-2^nd-order kinetics with r² of 0.90 and 0.99 respectively.

Non-Invasive Assessment of PVA-Borax Hydrogel Effectiveness in Removing Metal Corrosion Products on Stones by Portable NMR

The cleaning of buildings, statues, and artworks composed of stone materials from metal corrosion is an important topic in the cultural heritage field. In this work the cleaning effectiveness of a PVA-PEO-borax hydrogel in removing metal corrosion products from different porosity stones has been assessed by using a multidisciplinary and non-destructive approach based on relaxation times measurement by single-sided portable Nuclear Magnetic Resonance (NMR), Scanning Electron Microscopy—Energy Dispersive Spectroscopy (SEM-EDS), and Raman Spectroscopy. To this end, samples of two lithotypes, Travertine and Carrara marble, have been soiled by triggering acidic corrosion of some copper coins in contact with the stone surface. Then, a PVA-PEO-borax hydrogel was used to clean the stone surface. NMR data were collected in untreated, soiled with corrosion products, and hydrogel-cleaned samples. Raman spectroscopy was performed on PVA-PEO-borax hydrogel before and after cleaning of metal corrosion. Furthermore, the characterization of the dirty gel was obtained by SEM-EDS. The combination of NMR, SEM-EDS and Raman results suggests that the mechanism behind the hydrogel cleaning action is to trap heavy metal corrosion products, such as Cu²⁺ between adjacent boron ions cross-linked with PVA. Moreover, the PVA-PEO-borax hydrogel cleaning effectiveness depends on the stone porosity, being better in Carrara marble compared to Travertine.

Super adsorption performance of carboxymethyl cellulose/copper oxide-nickel oxide nanocomposite toward the removal of organic and inorganic pollutants

A novel nanocomposite bead based on polymeric matrix of carboxymethyl cellulose and copper oxide-nickel oxide nanoparticles was synthesized, characterized, and applied for adsorptive removal of inorganic and organic contaminants at trace level of part per million (mgL^-1) from aqueous sample. Carboxymethyl cellulose/copper oxide-nickel oxide (CMC/CuO-NiO) adsorbent beads were selective toward the removal of Pb(II) among other metal ions. The removal percentage of Pb(II) was more than 99% with 3 mgL^-1. The waste beads after Pb (II) adsorption (Pb@CMC/CuO-NiO) and CMC/CuO-NiO nanocomposite beads were employed as adsorbents for removing of various dyes. It was found that Pb@CMC/CuO-NiO can be reused as adsorbent for the removal of Congo Red (CR), while CMC/CuO-NiO nanocomposite beads were more selective for removal of Eosin Yellow (EY) from aqueous media. The adsorption of CR and EY was optimized, and the removal percentages were 93% and 96.4%, respectively. The influence of different parameters was studied on the uptake capacity of Pb(II), CR, and EY, and lastly, the CMC/CuO-NiO beads exhibited responsive performance in relation to pH and other parameters. Thus, the prepared CMC/CuO-NiO beads were found to be a smart material which is effective and played super adsorption performance in the removal of Pb(II), CR, and EY from aqueous solution. These features make CMC/CuO-NiO beads suitable for numerous scientific and industrial applications and may be used as an alternative to high-cost commercial adsorbents.

Graphene Oxide as a Pb(II) Separation Medium: Has Part of the Story Been Overlooked?

A key problem associated with the design of graphene oxide (GO) materials and their tuning for nanoscale separations is how specific functional groups influence the competitive adsorption of solvated ions and water at liquid/graphene interfaces. Computation accompanied by experiment shows that OH and COOH exert an influence on water adsorption properties stronger than that of O and H functional groups. The COO- anions, following COOH deprotonation, stabilize Pb(II) through strong electrostatic interactions. This suggests that, among the functional groups under study, COOH offers the best Pb(II) adsorption capacity and the ability to regenerate the sorbent through a pH swing. In line with computation, striking experimental observations revealed that a substantial increase in Pb(II) adsorption occurs with increasing pH. Our findings provide a systematic framework for controlled design and implementation of regenerable C-based sorbents used in separations and desalination.

Green synthesis, characterization, application and functionality of nitrogen-doped MgO/graphene nanocomposite

A facile, feasible, and green synthesis via an electrochemical exfoliation process was applied to synthesize nitrogen-doped MgO/graphene nanocomposite (N-MgO/G). The N-MgO/G nanocomposite was characterized by several analytical techniques including X-ray photoelectron spectroscopy, X-ray powder diffraction, transmission electron microscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, selected area electron diffraction, and elemental mapping analysis. N-MgO/G nanocomposite was then applied to adsorb lead metal ions (Pb²⁺) from aqueous solutions. The N-MgO/G nanocomposite demonstrated a remarkably high Langmuir maximum adsorption capacity (294.12 mg/g) for Pb²⁺ ions under the optimum experimental conditions at a pH of 5.13, time of 35 min, dose of 0.025 g, the concentration of 400 mg/L, and a temperature of 36 °C. Adsorption kinetics results fitted with a pseudo-second-order model and a thermodynamic study showed that Pb²⁺ adsorption is an endothermic process. The practical application of N-MgO/G was also investigated to test its applicability in real water samples collected from different sources such as deionized water, tap water, wastewater, and river water.

Coal Fly Ash Decorated with Graphene Oxide-Tungsten Oxide Nanocomposite for Rapid Removal of Pb2+ Ions and Reuse of Spent Adsorbent for Photocatalytic Degradation of Acetaminophen

Coal fly ash was decorated with a graphene oxide-tungsten oxide nanorods nanocomposite (CFA/GO/WO3NRs nanocomposite) via a hydrothermal method and applied for the remediation of lead (Pb2+ ions). The Pb2+ ion-loaded spent adsorbent (CFA/GO/WO3NRs + Pb2+ nanocomposite) was reused for the photodegradation of acetaminophen. CFA/GO/WO3NRs + Pb2+ nanocomposite displayed rapid removal of Pb2+ ions. Pseudo-second-order kinetics and the Langmuir isotherm model described the adsorption data. The adsorption capacity of the CFA/GO/WO3NRs nanocomposite was 41.51 mg/g for the removal of Pb2+ ions. Additionally, the Pb2+ ion-loaded spent adsorbent significantly influenced the degradation of acetaminophen by photocatalysis where 93% degradation was observed. It is worthy to note the reuse application of Pb2+ ion-loaded spent adsorbent as a photocatalyst, which will significantly reduce the secondary waste obtained from conventional adsorption methods.

A regenerable ion-imprinted magnetic biocomposite for selective adsorption and detection of Pb2+ in aqueous solution

A regenerable ion-imprinted magnetic biocomposite (IIMB) was successfully synthesized for simultaneous removal of Pb²⁺ using Serratia marcescens and carboxymethyl chitosan (CMC) as functional carriers, Pb²⁺ was utilized as the imprinted ion, while Fe₃O₄ served as the magnetic component. The structure and properties of IIMB were characterized by various techniques. The adsorption kinetics, isotherms and thermodynamics were applied to interpret the Pb²⁺ adsorption process on IIMB. The results showed the IIMB possessed prominent uptake ability toward Pb²⁺. The pseudo-second-order kinetic (R² = 0.9989) and Langmuir models (R² = 0.9555) fitted the data well. Adsorption thermodynamics revealed that the adsorption was a spontaneous endothermic reaction. The possible adsorption mechanisms involved physical adsorption, electrostatic attraction and complexing. Moreover, because Pb²⁺ can be specifically and strongly adsorbed on IIMB, a simple method for detection of Pb²⁺ was established by coupling IIMB with flame atomic absorption spectrometry (IIMB-FAAS). The developed IIMB-FAAS assay can sensitively detect Pb²⁺ with a linear range from 5.0 to 500.0 μg/L. The detection limit (LOD) of 0.95 μg/L as well as a quantification limit (LOQ) of 3.20 μg/L were obtained. This work proved that the IIMB could selective and efficient adsorb Pb²⁺, which provided some insights into wastewater treatment, water quality inspection and environmental remediation.

Ion exchange based approach for rapid and selective Pb(II) removal using iron oxide decorated metal organic framework hybrid

Polyacrylic acid capped Fe₃O₄ - Cu-MOF (i-MOF) hybrid was prepared for rapid and selective lead removal, with 93% removal efficiency, exceptional selectivity, and adsorption capacity of 610 mg/g and 91% of i-MOF hybrid could be easily separated from the contaminated water using magnetic separation. The adsorption process followed a pseudo-second-order model and the adsorption efficiency decreased from 93% to 83% on raising the temperature from 25 °C to 40 °C. The change in equilibrium adsorption capacity with respect to equilibrium adsorbate concentration followed the Langmuir isotherm model. i-MOF had a high selectivity coefficient and removal efficiency for lead ions even when exposed simultaneously with naturally abundant cations (Na(I), Ca(II), Mg(II)). Release of Cu(II) ions from the i-MOF after Pb(II) removal suggested suggested ion-exchange to be the dominant removal mechanism. This new finding for Pb(II) removal with excellent adsorption performance using i-MOF through ion exchange based approach is a viable option for treating lead contaminated water.

Effective Removal of Pb(II) from Aqueous Media by a New Design of Cu-Mg Binary Ferrite

Metal oxides and their composites have been extensively studied as effective adsorbents for the removal of heavy metals from aqueous solutions in environmental remediation. In this work, Cu_0.5Mg_0.5Fe₂O₄ was synthesized by a co-precipitation method followed by calcination (900 °C) and investigated for Pb(II) adsorption. The resultant samples were characterized by various analytical techniques including X-ray diffraction, N₂ adsorption-desorption, scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The results revealed that single-phase cubic spinel was obtained by the calcination of as-synthesized samples at a temperature of 900 °C. Cu_0.5Mg_0.5Fe₂O₄ ferrite is a mesoporous material with a surface area, a total pore volume, and an average pore size of 41.3 m²/g, 0.2 cm³/g, and 15.1 nm, respectively. Pb(II) adsorption on Cu_0.5Mg_0.5Fe₂O₄ fitted well to the Langmuir model, indicating monolayer adsorption with a maximum capacity of 57.7 mg/g. The pseudo-second-order kinetic model can exactly describe Pb(II) adsorption with the normalized standard deviation (Δq) of 1.24%. The obtained results confirmed that the Cu_0.5Mg_0.5Fe₂O₄ ternary oxides exhibit a high adsorption capacity toward Pb(II), thanks to the increase in active adsorptive sites of ferrite.

Biodegradation of microcystin-RR and nutrient pollutants using Sphingopyxis sp. YF1 immobilized activated carbon fibers-sodium alginate

A novel biological material named activated carbon fibers-sodium alginate@Sphingopyxis sp. YF1 (ACF-SA@YF1) was synthesized for microcystin-RR (MC-RR) and nutrient pollutant degradation in eutrophic water. The synthesized biomaterial was characterized by scanning electron microscopy (SEM). Box-Behnken design and response surface methodology (RSM) were utilized for the optimization of conditions during the MC-RR degradation. The degradation of MC-RR and nutrient pollutants was dynamically detected. The results revealed that the optimal conditions were temperature 32.51 °C, pH 6.860, and inoculum 14.97%. The removal efficiency of MC-RR, nitrogen, phosphorus, and chemical oxygen demand were 0.76 μg/mL/h, 32.45%, 94.57%, and 64.07%, respectively. In addition, ACF-SA@YF1 also performed satisfactory cyclic stability, while the MC-RR removal efficiency was 70.38% after seven cycles and 78.54% of initial activity after 20 days of storage. Therefore, it is reasonable to believe that ACF-SA@YF1 is an effective material which has a great prospect in removing MC-RR and nutrients from freshwater ecosystems.

Enhanced Heavy Metal Removal from Acid Mine Drainage Wastewater Using Double-Oxidized Multiwalled Carbon Nanotubes

Due to the unique properties of carbon nanotubes (CNTs), they have attracted great research attention as an emergent technology in many applications including water and wastewater treatment. However, raw CNTs have few functional groups, which limits their use in heavy metal removal. Nevertheless, their removal properties can be improved by oxidation processes that modify its surface. In this study, we assessed the capacity of oxidized and double-oxidized multiwalled carbon nanotubes (MWCNTs) to remove heavy metals ions from acidic solutions. The MWCNTs were tested for copper (Cu), manganese (Mn), and zinc (Zn) removal, which showed an increment of 79%, 78%, and 48%, respectively, with double-oxidized MWCNTs compared to oxidized MWCNTs. Moreover, the increase in pH improved the sorption capacity for all the tested metals, which indicates that the sorption potential is strongly dependent on the pH. The kinetic adsorption process for three metals can be described well with a pseudo-second-order kinetic model. Additionally, in multimetallic waters, the sorption capacity decreases due to the competition between metals, and it was more evident in the removal of Zn, while Cu was less affected. Besides, XPS analysis showed an increase in oxygen-containing groups on the MWCNTs surface after oxidation. Finally, these analyses showed that the chemical interactions between heavy metals and oxygen-containing groups are the main removal mechanism. Overall, these results contribute to a better understanding of the potential use of CNTs for water treatment.

A composite prepared from carboxymethyl chitosan and aptamer-modified gold nanoparticles for the colorimetric determination of Salmonella typhimurium

An aptamer-based assay is described for the determination of Salmonella typhimurium (S. typh). Carboxymethyl chitosan was loaded with amino-modified aptamer against S. typh, and then adsorbed on gold nanoparticles by electrostatic interaction to form a composite that acts as the molecular recognition element. In the presence of S. typh, it will be bound by the aptamer, and this changes the structure of the recognition element. On addition of salt solution, the gold nanoparticles agglomerate so that the color of the solution changes from red to blue. S. typh can be detected via measurement of the absorbance at 550 nm. Absorbance increases linearly with the logarithm of the S. typh concentration in the range from 100 to 10⁹ cfu·mL^-1. The limit of detection is 16 cfu·mL^-1. The specificity and practicability of the assay were evaluated. The recoveries of S. typh from spiked milk samples are between 92.4 and 97.2%. The analytical results are basically consistent with those of a plate counting method. Graphical abstract Schematic representation of the colorimetric assay for Salmonella typhimuium (S. typh) using carboxymethyl chitosan (CMCS)-aptamer (Apt)-gold nanoparticles (AuNPs) composites.