Amyloid fibril formation by human stefin B in vitro: immunogold labelling and comparison to stefin A

Assembly of Stefin B into Polymorphic Oligomers Probed by Discrete Molecular Dynamics

Assembly of an amyloidogenic protein stefin B into molten globule oligomers is studied by efficient discrete molecular dynamics. Consistent with in vitro findings, tetramers form primarily through dimer association, resulting in a decreased trimer abundance. Oligomers up to heptamers display elongated rod-like morphologies akin to protofibrils, whereas larger oligomers, decamers through dodecamers, form elongated, branched, as well as annular structures, providing structural insights into pore forming ability and toxicity of amyloidogenic proteins.

The role of initial oligomers in amyloid fibril formation by human stefin B

Oligomers are commonly observed intermediates at the initial stages of amyloid fibril formation. They are toxic to neurons and cause decrease in neural transmission and long-term potentiation. We describe an in vitro study of the initial steps in amyloid fibril formation by human stefin B, which proved to be a good model system. Due to relative stability of the initial oligomers of stefin B, electrospray ionization mass spectrometry (ESI MS) could be applied in addition to size exclusion chromatography (SEC). These two techniques enabled us to separate and detect distinguished oligomers from the monomers: dimers, trimers, tetramers, up to decamers. The amyloid fibril formation process was followed at different pH and temperatures, including such conditions where the process was slow enough to detect the initial oligomeric species at the very beginning of the lag phase and those at the end of the lag phase. Taking into account the results of the lower-order oligomers transformations early in the process, we were able to propose an improved model for the stefin B fibril formation.

Pore formation by human stefin B in its native and oligomeric states and the consequent amyloid induced toxicity

It is well documented that amyloid forming peptides and proteins interact with membranes and that this correlates with cytotoxicity. To introduce the theme we give a brief description of some amyloidogenic proteins and note their similarities with pore forming toxins (PFTs) and cell penetrating peptides. Human stefin B, a member of the family of cystatins, is an amyloidogenic protein in vitro. This review describes our studies of the interaction of stefin B oligomers and prefibrillar aggregates with model membranes leading to pore formation. We have studied the interaction between human stefin B and artificial membranes of various compositions. We also have prepared distinct sizes and morphologies of stefin B prefibrillar states and assessed their toxicity. Furthermore, we have measured electrical currents through pores formed by stefin B prefibrillar oligomers in a planar lipid bilayer setup. We finally discuss the possible functional and pathological significance of such pores formed by human stefin B.

The cross-road between the mechanisms of protein folding and aggregation; study of human stefin B and its H75W mutant

The role of the aromatic residue at site 75 to protein stability, the mechanism of folding and the mechanism of amyloid-fibril formation were investigated for the human stefin B variant (bearing Y at site 31) and its point mutation H75W. With an aim to reveal the conformation at the cross-road between folding and aggregation, first, the kinetics of folding and oligomer formation by human stefin B(Y31) variant were studied. It was found to fold in three kinetic phases at pH 4.8 and 10% TFE; the pH and solvent conditions that transform the protein into amyloid fibrils at longer times. The same pH leads to the formation of native-like intermediate (known from previous studies of this variant), meaning that the process of folding and amyloid-fibril formation share the same structural intermediate, which is in this case native-like and dimeric. At pH 5.8 and 7.0 stefin B folded to the native state in four kinetic phases over two intermediates. In distinction, the mutant H75W did not fold to completion, ending in intermediate states at all pH values studied: 4.8, 5.8 and 7.0. At pH 4.8 and 5.8, the mutant folded in one kinetic phase to the intermediate of the "molten globule" type, which leads to the conclusion that its mechanism of folding differs from the one of the parent stefin B at the same pH. At pH 7.0 the mutant H75W folded in three kinetic phases to a native-like intermediate, analogous to folding of stefin B at pH 4.8.

Helicobacter pylori exploits a unique repertoire of type IV secretion system components for pilus assembly at the bacteria-host cell interface

Colonization of the human stomach by Helicobacter pylori is an important risk factor for development of gastric cancer. The H. pylori cag pathogenicity island (cag PAI) encodes components of a type IV secretion system (T4SS) that translocates the bacterial oncoprotein CagA into gastric epithelial cells, and CagL is a specialized component of the cag T4SS that binds the host receptor α5β1 integrin. Here, we utilized a mass spectrometry-based approach to reveal co-purification of CagL, CagI (another integrin-binding protein), and CagH (a protein with weak sequence similarity to CagL). These three proteins are encoded by contiguous genes in the cag PAI, and are detectable on the bacterial surface. All three proteins are required for CagA translocation into host cells and H. pylori-induced IL-8 secretion by gastric epithelial cells; however, these proteins are not homologous to components of T4SSs in other bacterial species. Scanning electron microscopy analysis reveals that these proteins are involved in the formation of pili at the interface between H. pylori and gastric epithelial cells. ΔcagI and ΔcagL mutant strains fail to form pili, whereas a ΔcagH mutant strain exhibits a hyperpiliated phenotype and produces pili that are elongated and thickened compared to those of the wild-type strain. This suggests that pilus dimensions are regulated by CagH. A conserved C-terminal hexapeptide motif is present in CagH, CagI, and CagL. Deletion of these motifs results in abrogation of CagA translocation and IL-8 induction, and the C-terminal motifs of CagI and CagL are required for formation of pili. In summary, these results indicate that CagH, CagI, and CagL are components of a T4SS subassembly involved in pilus biogenesis, and highlight the important role played by unique constituents of the H. pylori cag T4SS.

Helicobacter pylori persistently colonizes the stomach in approximately half of the human population. People who are infected with H. pylori strains harboring the cag pathogenicity island (PAI) have an increased risk of developing gastric cancer. The cag PAI encodes a type IV secretion system (T4SS) that is utilized by the bacteria to inject the bacterial oncoprotein CagA into gastric epithelial cells. Related T4SSs found in several other bacteria have been studied in detail, but thus far there has been very little study of the H. pylori cag T4SS. Here, we utilized a mass spectrometry-based approach to reveal co-purification of three constituents of the H. pylori T4SS (CagH, CagI, and CagL) that lack homology to components of T4SSs in other bacterial species. These proteins are essential for CagA translocation into host cells, and scanning electron microscope studies reveal that the proteins are involved in the formation of pili at the bacterial-host cell interface. A conserved C-terminal motif present in CagH, CagI, and CagL is essential for functionality of the T4SS. This study highlights the important role played by unique constituents of the H. pylori cag T4SS, and illustrates the marked variation that exists among bacterial T4SSs.

Mechanisms of amyloid fibril formation--focus on domain-swapping

Conformational diseases constitute a group of heterologous disorders in which a constituent host protein undergoes changes in conformation, leading to aggregation and deposition. To understand the molecular mechanisms of the process of amyloid fibril formation, numerous in vitro and in vivo studies, including model and pathologically relevant proteins, have been performed. Understanding the molecular details of these processes is of major importance to understand neurodegenerative diseases and could contribute to more effective therapies. Many models have been proposed to describe the mechanism by which proteins undergo ordered aggregation into amyloid fibrils. We classify these as: (a) templating and nucleation; (b) linear, colloid-like assembly of spherical oligomers; and (c) domain-swapping. In this review, we stress the role of domain-swapping and discuss the role of proline switches.

Intracellular aggregation of human stefin B: confocal and electron microscopy study

BACKGROUND

Protein aggregation is a major contributor to the pathogenic mechanisms of human neurodegenerative diseases. Mutations in the CSTB (cystatin B) gene [StB (stefin B)] cause EPM1 (progressive myoclonus epilepsy of type 1), an epilepsy syndrome with features of neurodegeneration and increased oxidative stress. Oligomerization and aggregation of StB in mammalian cells have recently been reported. It has also been observed that StB is overexpressed after seizures and in certain neurodegenerative conditions, which could potentially lead to its aggregation. Human StB proved to be a good model system to study amyloid fibril formation in vitro and, as we show here, to study protein aggregation in cells.

RESULTS

Endogenous human StB formed smaller, occasional cytoplasmic aggregates and chemical inhibition of the UPS (ubiquitin-proteasome system) led to an increase in the amount of the endogenous protein and also increased its aggregation. Further, we characterized both the untagged and T-Sapphire-tagged StB on overexpression in mammalian cells. Compared with wild-type StB, the EPM1 missense mutant (G4R), the aggregate-prone EPM1 mutant (R68X) and the Y31 StB variant (both tagged and untagged) formed larger cytosolic and often perinuclear aggregates accompanied by cytoskeletal reorganization. Non-homogeneous morphology of these large aggregates was revealed using TEM (transmission electron microscopy) with StB detected by immunogold labelling. StB-positive cytoplasmic aggregates were partially co-localized with ubiquitin, proteasome subunits S20 and S26 and components of microfilament and microtubular cytoskeleton using confocal microscopy. StB aggregates also co-localized with LC3 and the protein adaptor p62, markers of autophagy. Flow cytometry showed that protein aggregation was associated with reduced cell viability.

CONCLUSIONS

We have shown that endogenous StB aggregates within cells, and that aggregation is increased upon protein overexpression or proteasome inhibition. From confocal and TEM analyses, we conclude that aggregates of StB show some of the molecular characteristics of aggresomes and may be eliminated from the cell by autophagy. Intracellular StB aggregation shows a negative correlation with cell survival.

The mechanism of amyloid-fibril formation by stefin B: temperature and protein concentration dependence of the rates

Cystatins, a family of structurally related cysteine proteinase inhibitors, have proved to be useful model system to study amyloidogenesis. We have extended previous studies of the kinetics of amyloid-fibril formation by human stefin B (cystatin B) and some of its mutants, and proposed an improved model for the reaction. Overall, the observed kinetics follow the nucleation and growth behavior observed for many other amyloidogenic proteins. The minimal kinetic scheme that best fits measurements of changes in CD and thioflavin T fluorescence as a function of protein concentration and temperature includes nucleation (modeled as N(I) irreversible transitions with equivalent rates (k(I)), which fitted with N(I) = 64), fibril growth and nonproductive oligomerization, best explained by an off-pathway state with a rate-limiting escape rate. Three energies of activation were derived from global fitting to the minimal kinetic scheme, and independently through the fitting of the individual component rates. Nucleation was found to be a first-order process within an oligomeric species with an enthalpy of activation of 55 +/- 4 kcal mol(-1). Fibril growth was a second-order process with an enthalpy of activation (27 +/- 5 kcal mol(-1)), which is indistinguishable from that of tetramer formation by cystatins, which involves limited conformational changes including proline trans to cis isomerization. The highest enthalpy of activation (95 +/- 5 kcal mol(-1) at 35 degrees C), characteristic of a substantial degree of unfolding as observed prior to domain-swapping reactions, equated with the escape rate of the off-pathway oligomeric state.

Size and morphology of toxic oligomers of amyloidogenic proteins: a case study of human stefin B

Amyloid-induced toxicity is a well-known phenomenon but the molecular background remains unclear. One hypothesis relates toxicity to amyloid-membrane interactions, predicting that amyloid oligomers make pores into membranes. Therefore, the toxicity and membrane interaction of prefibrillar aggregates and individual oligomers of a non-pathological yet highly amyloidogenic protein human stefin B (cystatin B) was examined. By monitoring caspase-3 activity and by testing cell viability, we showed that the lag phase aggregates obtained at pH 5 and 3 were toxic to neuroblastoma cells. Of equal toxicity were the higher-order oligomers prepared at pH 7 by freeze-thaw cycles. The higher-order oligomers eluted on size-exclusion chromatography (SEC) as a broad peak comprising hexamers, octamers, 12- and 16-mers, well separated from monomers, dimers and tetramers. Only oligomers higher than the tetramers (Rh >3.5 nm) proved toxic, in contrast to dimers and tetramers. In accordance with data from SEC, dynamic light scattering and atomic force microscopy data indicate that the toxic oligomers have diameters larger than 4 nm. Critical pressure measurements showed that the toxic higher-order oligomers inserted more effectively into model lipid monolayers than dimers and tetramers. They also bound, similarly to prefibrillar aggregates, to the plasma membrane and became internalized. Taken together, our results confirm the importance of membrane interaction and perforation in the phenomenon of cytotoxicity.

Amyloid fibril formation by human stefin B: influence of pH and TFE on fibril growth and morphology

As shown before, human stefin B (cystatin B) populates two partly unfolded species, a native-like state at pH 4.8 and a structured molten globule state at pH 3.3 (high ionic strength), from each of which amyloid fibrils grow. Here, we show that the fibrils obtained at pH 3.3 differ from those at pH 4.8 and that those obtained at pH 3.3 (protofibrils) do not transform readily to mature fibrils. In addition we show that amorphous aggregates are also a source of fibrils. The kinetics of amyloid fibril formation at different trifluoroethanol (TFE) concentrations were measured. TFE accelerates fibril growth at predenaturational concentrations of the alcohol. At concentrations higher than 10%, the fibrillar yield decreases proportionately as the population of an all alpha-helical, denatured form of the protein increases. At an optimum TFE concentration, the lag and the growth phases are observed, similarly to some other amyloidogenic proteins. Morphology of the protein species at the beginning and the end of the reactions was observed using atomic force microscopy and transmission electron microscopy. Final fibril morphologies differ depending on solvent conditions.

Folding and amyloid-fibril formation for a series of human stefins' chimeras: any correlation?

To study the influence of whole secondary structure elements to the process of folding and amyloid-fibril formation, chimeras of stefins have been prepared. GdnHCl denaturation curves and folding rates (chevron plots) have been analyzed based on a two-state mechanism. The order of stability is: stefin A > aAbbbb > bAbbbb > stefin B = aBaaaa > bBaaaa, where the make up of chimeric proteins is designated by small letters representing the source of individual strands (a for stefin A, b for stefin B) and a capital letter representing the source of the helix (A for stefin A and B for stefin B). Only the fast folding reactions were included in the analysis and it has been found that stefin B folds the fastest (657 s(-1)). Similarly, fast folders are the chimeric proteins aBaaaa and bBaaaa, both of which contain the alpha-helix of stefin B. Unfolding rates correlate very well with protein stability, with the slowest rate for the most stable protein, stefin A. Amyloid-fibril growth was measured for each protein by monitoring thioflavin T fluorescence and was visualized using electron microscopy. The propensity to form amyloid-fibrils is in the order: stefin B > bAbbbb > aAbbbb > bBaaaa > aBaaaa > stefin A. This order does not correlate with stability, or with the folding or unfolding rates. Instead, the propensity to fibrillize is related to selected parts of structure, such as the beta-sheet of stefin B, and can be predicted reasonably well by calculating the beta-strand propensity of the denatured states.

Interaction of human stefin B in the prefibrillar oligomeric form with membranes. Correlation with cellular toxicity

Protein aggregation is central to most neurodegenerative diseases, as shown by familial case studies and by animal models. A modified 'amyloid cascade' hypothesis for Alzheimer's disease states that prefibrillar oligomers, also called amyloid-beta-derived diffusible ligands or globular oligomers, are the responsible toxic agent. It has been proposed that these oligomeric species, as shown for amyloid-beta, beta2-microglobulin or prion fragments, exert toxicity by forming pores in membranes, initiating a cascade of detrimental events for the cell. Interaction of granular aggregates and globular oligomers of an amyloidogenic protein, human stefin B, with model lipid membranes and monolayers was studied. Prefibrillar oligomers/aggregates of stefin B are shown to cause concentration-dependent membrane leaking, in contrast to the homologous stefin A. Prefibrillar oligomers/aggregates of stefin B also increase the surface pressure at an air-water interface, i.e. they have amphipathic character and are surface seeking. In addition, they show stronger interaction with 1,2-dioleoyl-sn-glycero-3-phosphocholine and 1,2-dioleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] monolayers than native stefin A or nonaggregated stefin B. Prefibrillar aggregates interact predominantly with acidic phospholipids, such as dioleoylphosphatidylglycerol or dipalmitoylphosphatidylserine, as shown by calcein release experiments and surface plasmon resonance. The same preparations are toxic to neuroblastoma cells, as determined by the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium assay, again in contrast to the homologue stefin A, which does not aggregate under any of the conditions studied. This study is aimed to contribute to the general model of cellular toxicity induced by prefibrillar oligomers of amyloidogenic proteins, not necessarily involved in pathology.

Differences in aggregation properties of three site-specific mutants of recombinant human stefin B

We describe expression, purification, and characterization of three site-specific mutants of recombinant human stefin B: H75W, P36G, and P79S. The far- and near-UV CD spectra have shown that they have similar secondary and tertiary structures to the parent protein. The elution on gel-filtration suggests that recombinant human stefin B and the P36G variant are predominantly monomers, whereas the P79S variant is a dimer. ANS dye binding, reflecting exposed hydrophobic patches, is highest for the P36G variant, both at pH 5 and 3. ANS dye binding also is increased for stefin B and the other two variants at pH 3. Under the chosen conditions the highest tendency to form amyloid fibrils has been shown for the recombinant human stefin B. The P79S variant demonstrates a longer lag phase and a lower rate of fibril formation, while the P36G variant is most prone to amorphous aggregation. This was demonstrated by ThT fluorescence as a function of time and by transmission electron microscopy.

Different propensity to form amyloid fibrils by two homologous proteins-Human stefins A and B: searching for an explanation

By using ThT fluorescence, X-ray diffraction, and atomic force microscopy (AFM), it has been shown that human stefins A and B (subfamily A of cystatins) form amyloid fibrils. Both protein fibrils show the 4.7 A and 10 A reflections characteristic for cross beta-structure. Similar height of approximately 3 nm and longitudinal repeat of 25-27 nm were observed by AFM for both protein fibrils. Fibrils with a double height of 5.6 nm were only observed with stefin A. The fibril's width for stefin A fibrils, as observed by transmission electron microscopy (TEM), was in the same range as previously reported for stefin B (Zerovnik et al., Biochem Biophys Acta 2002;1594:1-5). The conditions needed to undergo fibrillation differ, though. The amyloid fibrils start to form at pH 5 for stefin B, whereas in stefin A, preheated sample has to be acidified to pH < 2.5. In both cases, adding TFE, seeding, and alignment in a strong magnetic field accelerate the fibril growth. Visual analysis of the three-dimensional structures of monomers and domain-swapped dimers suggests that major differences in stability of both homologues stem from arrangement of specific salt bridges, which fix alpha-helix (and the alpha-loop) to beta-sheet in stefin A monomeric and dimeric forms.

Comparison of backbone dynamics of monomeric and domain-swapped stefin A

Three-dimensional domain swapping has been observed in increasing number of proteins and has been implicated in the initial stages of protein aggregation, including that of the cystatins. Stefin A folds as a monomer under native conditions, while under some denaturing conditions domain-swapped dimer is formed. We have determined the backbone dynamics of the monomeric and domain-swapped dimeric forms of stefin A by (15)N relaxation using a model-free approach. The overall correlation times of the molecules were determined to be 4.6 +/- 0.1 ns and 9.2 +/- 0.2 ns for the monomer and the dimer, respectively. In the monomer, decreased order parameters indicate an increased mobility for the N-terminal trunk, the first and the second binding loops. At the opposite side of the molecule, the loop connecting the alpha-helix with strand B, the beginning of strand B and the loop connecting strands C and D show increased localized mobility. In the domain-swapped dimer, a distinctive feature of the structure is the concatenation of strands B and C into a single long beta-strand. The newly formed linker region between strands B and C, which substitutes for the first binding loop in the monomer, has order parameters typical for the remainder of the beta-strands. Thus, the interaction between subunits that occurs on domain-swapping has consequences for the dynamics of the protein at long-range from the site of conformational change, where an increased rigidity in the newly formed linker region is accompanied by an increased mobility of loops remote from that site.