Improving hemocompatibility in tissue-engineered products employing heparin-loaded nanoplatforms

The enhancement of hemocompatibility through the use of nanoplatforms loaded with heparin represents a highly desirable characteristic in the context of emerging tissue engineering applications. The significance of employing heparin in biological processes is unquestionable, owing to its ability to interact with a diverse range of proteins. It plays a crucial role in numerous biological processes by engaging in interactions with diverse proteins and hydrogels. This review provides a summary of recent endeavors focused on augmenting the hemocompatibility of tissue engineering methods through the utilization of nanoplatforms loaded with heparin. This study also provides a comprehensive review of the various applications of heparin-loaded nanofibers and nanoparticles, as well as the techniques employed for encapsulating heparin within these nanoplatforms. The biological and physical effects resulting from the encapsulation of heparin in nanoplatforms are examined. The potential applications of heparin-based materials in tissue engineering are also discussed, along with future perspectives in this field.

Recent advances in the design and immobilization of heparin for biomedical application: A review

Heparin, a member of the glycosaminoglycan family, is renowned as the most negatively charged biomolecule discovered within the realm of human biology. This polysaccharide serves a vital role as a regulator for various proteins, cells, and tissues within the human body, positioning itself as a pivotal macromolecule of significance. The domain of biology has witnessed substantial interest in the intricate design of heparin and its derivatives, particularly focusing on heparin-based polymers and hydrogels. This intrigue spans a wide spectrum of applications, encompassing diverse areas such as protein adsorption, anticoagulant properties, controlled drug release, development of implants, stent innovation, enhancement of blood compatibility, acceleration of wound healing, and pioneering strides in tissue engineering. This comprehensive overview delves into a multitude of developed heparin conjugates, employing various methods, and explores their functions in both the biomedicine and electronics fields. The efficacy of materials derived from heparin is also thoroughly investigated, encompassing considerations such as thrombogenicity, drug release kinetics, affinity for growth factors (GFs), biocompatibility, and electrochemical analyses. We firmly believe that by redirecting focus towards research and advancements in heparin-related polymers/hydrogels, this study will ignite further research and accelerate potential breakthroughs in this promising and evolving field of discovery.

Sandwich-like electro-conductive polyurethane-based gelatin/soybean oil nanofibrous scaffolds with a targeted release of simvastatin for cardiac tissue engineering

Cardiac tissue engineering (CTE) is a promising way for the restoration of injured cardiac tissue in the healthcare system. The development of biodegradable scaffolds with appropriate chemical, electrical, mechanical, and biological properties is an unmet need for the success of CTE. Electrospinning is a versatile technique that has shown potential applications in CTE. Herein, four different types of multifunctional scaffolds, including synthetic-based poly (glycerol sebacate)-polyurethane (PGU), PGU-Soy scaffold, and a series of trilayer scaffolds containing two outer layers of PGU-Soy and a middle (inner) layer of gelatin (G) as a natural and biodegradable macromolecule without simvastatin (S) and with simvastatin (GS), an anti-inflammatory agent, were fabricated in the sandwich-like structure using electrospinning technique. This approach offers a combination of the advantages of both synthetic and natural polymers to enhance the bioactivity and the cell-to-cell and cell-to-matrix intercommunication. An in vitro drug release analysis was performed after the incorporation of soybean oil (Soy) and G. Soy is used as a semiconducting material was introduced to improve the electrical conductivity of nanofibrous scaffolds. The physicochemical properties, contact angle, and biodegradability of the electrospun scaffolds were also assessed. Moreover, the blood compatibility of nanofibrous scaffolds was studied through activated partial thromboplastin time (APTT), prothrombin time (PT), and hemolytic assay. The results showed that all scaffolds exhibited defect-free morphologies with mean fiber diameters in the range of 361 ± 109 to 417 ± 167 nm. A delay in blood clotting was observed, demonstrating the anticoagulant nature of nanofibrous scaffolds. Furthermore, rat cardiomyoblast cell lines (H9C2) were cultured on scaffolds for 7 days, and the morphology and cell arrangement were monitored. Data indicated an appropriate cytocompatibility. Of note, in the PGU-Soy/GS nanofibrous scaffold, a high survival rate was indicated compared to other groups. Our findings exhibited that the simvastatin-loaded polymeric system had positive effects on cardiomyoblasts attachment and growth and could be utilized as a drug release carrier in the field of CTE.

Evaluation of Lactobacillus plantarum and PRGF as a new bioactive multi-layered scaffold PU/PRGF/gelatin/PU for wound healing

The effect of tissue engineering strategies in combination with Lactobacillus plantarum and platelet-rich growth factor (PRGF) with the aim of creating an appropriate wound dressing can be useful in wound healing and infection prevention in patients suffering from acute and chronic skin damages. Therefore, in this study, a new approach was employed to create a bioactive multilayer electrospun scaffold composed of polyurethane (PU), PRGF, and gelatin fibers, then human adipose-derived mesenchymal stem cells (hAMSCs), fibroblast cells (HU-02) and L. plantarum were cultured on the scaffold. The physicochemical properties, biocompatibility, and antibacterial activity of the scaffold were evaluated. In addition, the expression of the migration and proliferation genes of fibroblast cells were investigated by real-time PCR (polymerase chain reaction). Mitochondrial activity assays revealed that PRFG and L. plantarum had a significant positive effect on the viability of target co-cultured cells.Fluorescent and SEM (scanning electron microscopy) images presented the cells and bacterial proliferation and adhesion in hydrophilic scaffolds within 21 days. The sustained release of PRGF from scaffolds with a zero-order pattern was confirmed. RT-PCR analysis revealed that PRGF elevated the expression of VEGF genes up to fourfold, but L. plantarum had a better effect on DDR2 gene expression compared to the TCPS group. Antibacterial tests showed that L. plantarum has a bacterial load reduction of more than 70% in CFU/mL. The present scaffold is an appropriate model for cell attachment, migration, proliferation, and infection prevention.

Research Progress on Emerging Polysaccharide Materials Applied in Tissue Engineering

The development and application of polysaccharide materials are popular areas of research. Emerging polysaccharide materials have been widely used in tissue engineering fields such as in skin trauma, bone defects, cartilage repair and arthritis due to their stability, good biocompatibility and reproducibility. This paper reviewed the recent progress of the application of polysaccharide materials in tissue engineering. Firstly, we introduced polysaccharide materials and their derivatives and summarized the physicochemical properties of polysaccharide materials and their application in tissue engineering after modification. Secondly, we introduced the processing methods of polysaccharide materials, including the processing of polysaccharides into amorphous hydrogels, microspheres and membranes. Then, we summarized the application of polysaccharide materials in tissue engineering. Finally, some views on the research and application of polysaccharide materials are presented. The purpose of this review was to summarize the current research progress on polysaccharide materials with special attention paid to the application of polysaccharide materials in tissue engineering.

A critical review of fibrous polyurethane-based vascular tissue engineering scaffolds

Certain polymeric materials such as polyurethanes (PUs) are the most prevalent class of used biomaterials in regenerative medicine and have been widely explored as vascular substitutes in several animal models. It is thought that PU-based biomaterials possess suitable hemo-compatibility with comparable performance related to the normal blood vessels. Despite these advantages, the possibility of thrombus formation and restenosis limits their application as artificial functional vessels. In this regard, various surface modification approaches have been developed to enhance both hemo-compatibility and prolong patency. While critically reviewing the recent advances in vascular tissue engineering, mainly PU grafts, this paper summarizes the application of preferred cell sources to vascular regeneration, physicochemical properties, and some possible degradation mechanisms of PU to provide a more extensive perspective for future research.

Fabrication of carboxymethyl chitosan/poly(ε-caprolactone)/doxorubicin/nickel ferrite core-shell fibers for controlled release of doxorubicin against breast cancer

The coaxial electrospinning for producing core-shell nanofibers due to control the release profile of drug by the shell layer has been developed. N-carboxymethyl chitosan (CMC)-polyvinyl alcohol (core)/poly(ε-caprolactone) (PCL) (shell) nanofibers were produced via coaxial electrospinning. Doxorubicin (DOX) and nickel ferrite nanoparticles were incorporated into the nanofibers for controlled release of DOX against MCF-7 breast cancer. The minimum CMC/PCL fiber diameter was found to be 300 nm by optimizing of three variables including voltage to distance ratio (1.5-2.5 kV/cm), CMC concentration (4-6 wt.%) and PCL concentration (8-12 wt.%). The synthesized core-shell fibers were characterized using FTIR, XRD, SEM, and TEM analysis. The extended release and controlled release of DOX from core-shell nanofibers were achieved under physiological pH without external magnetic field (EMF) and acidic pH with EMF during 25 and 7 days, respectively. The maximum cytotoxicity of MCF-7 breast cancer cells was about 83 % using CMC/PCL/nickel ferrite 10 % nanofibers and EMF.

Simvastatin-loaded graphene oxide embedded in polycaprolactone-polyurethane nanofibers for bone tissue engineering applications

Here, the role of simvastatin-loaded graphene oxide embedded in polyurethane-polycaprolactone nanofibers for bone tissue engineering has been investigated. The scaffolds were physicochemically and mechanically characterized, and obtained polymeric composites were used as MG-63 cell culture scaffolds. The addition of graphene oxide-simvastatin to nanofibers generates a homogeneous and uniform microstructure as well as a reduction in fiber diameter. Results of water-scaffolds interaction indicated higher hydrophilicity and absorption capacity as a function of graphene oxide addition. Scaffolds’ mechanical properties and physical stability improved after the addition of graphene oxide. Inducing bioactivity after the addition of simvastatin-loaded graphene oxide terminated its capability for hard tissue engineering application, evidenced by microscopy images and phase characterization. Nanofibrous scaffolds could act as a sustained drug carrier. Using the optimal concentration of graphene oxide-simvastatin is necessary to avoid toxic effects on tissue. Results show that the scaffolds are biocompatible to the MG-63 cell and support alkaline phosphatase activity, illustrating their potential use in bone tissue engineering. Briefly, graphene-simvastatin-incorporated in polymeric nanofibers was developed to increase bioactive components’ synergistic effect to induce more bioactivity and improve physical and mechanical properties as well as in vitro interactions for better results in bone repair.

Titanium coating: introducing an antibacterial and bioactive chitosan-alginate film on titanium by spin coating

Coating of titanium (Ti) implants with biocompatible polymers were performed to improve bone healing. In this study, pure Ti implants were coated via chitosan and alginate by spin coating method at 1000, 4000, and 8000 rpm. The coating layer was cross-linked by calcium chloride. Their chemical structures were analyzed by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) evaluations. The morphology of the created coating was observed by scanning electron microscopy (SEM), and the best uniformity was observed in the prepared coating at 8000 rpm (6093× g) spinal speed. The adhesion strength of the coating layer on the substrate was evaluated by the adhesion pull-off test. Also, the best adhesion strength was achieved at an 8000 rpm (6093× g) coating rate. Bioactivity of the chitosan-alginate coating on Ti sheets was evaluated by soaking the samples in a simulated body fluid (SBF) solution. The apatite formation on prepared Ti sheets was investigated by SEM, XRD, and energy dispersive X-ray spectroscopy (EDS). A higher mineralization appeared on coated samples compared with pure Ti. The antibacterial behavior of the implants was analyzed by bacterial counting against Escherichia coli. The presence of chitosan and alginate on the Ti sheets resulted in a better antibacterial effect. In-vitro experiments, with L929 fibroblast cells, confirmed the biocompatibility of the implants. Coating the Ti implants with chitosan and alginate improved biomineralization and biological behavior of the implant especially at the spinal speed of 8000 rpm (6093× g). These implants can support osteoblast cell adhesion and facilitate bone regeneration.

Mussel-inspired polydopamine-mediated surface modification of freeze-cast poly (ε-caprolactone) scaffolds for bone tissue engineering applications

There are many methods used to fabricate the scaffolds for tissue regeneration, among which freeze casting has attracted a great deal of attention due to the capability to create a unidirectional structure. In this study, polycaprolactone (PCL) scaffolds were fabricated by freeze-casting technology in order to create porous microstructure with oriented open-pore channels. To induce biomineralization, and to improve hydrophilicity and cell interactions, mussel-inspired polydopamine (PDA) was coated on the surface of the freeze-cast PCL constructs. Then, the synergistic effects of oriented microstructure and deposited layer on efficient reconstruction of injured bone were studied. Microscopic observations demonstrated that, the coated layer did not show any special change in lamellar microstructure of the scaffolds. Water-scaffold interactions were evaluated by contact angle measurements, and they demonstrated strong enhancement in the hydrophilicity of the polymeric scaffolds after PDA coating. Biodegradation ratio and water uptake evaluation confirmed an increase in the measured values after PDA precipitation. The biomineralization of the PDA-coated scaffolds was characterized by field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX) and X-ray diffraction (XRD). Obtained results confirmed biomineralization of the constructs after a 28-day immersion in a simulated body fluid (SBF) solution. Mechanical analysis demonstrated higher compressive strength after PDA coating. L929 fibroblast cell viability and attachment illustrated that PDA-coated PCL scaffolds are able to support cell adhesion and proliferation. The increased secretion of alkaline phosphatase (ALP) after culturing osteosarcoma cell lines (MG-63) revealed the initial capability of scaffolds to induce bone regeneration. Therefore, the PDA-coated scaffolds introduce a promising approach for bone tissue engineering application.

Relation of the chondromalatia patellae to proximal tibial anatomical parameters, assessed with MRI

Background Magnetic resonance imaging (MRI) is a non-invasive highly sensitive tool for diagnosing chondromalacia patellae in the early stages. Many studies have evaluated patellar and trochlear morphology with different radiologic indices. We aimed to assess the discriminative power of tibial, patellar, and femoral indices in MRI for chondromalacia patellae. Patients and methods 100 cases of chondromalacia, as well as 100 age-matched controls among the patients who underwent knee MRI between February 2017 and March 2019, were included. The standard protocol of knee MRI was applied and the diagnosis of chondromalacia was made on MRI findings. Chondromalacia subjects were also classified as grade 1 to 4 according to the Modified Outerbridge's MRI grading system. We measured 25 MRI parameters in the knee and adjacent structures to determine the relation between chondromalacia patellae and anatomical MRI parameters. Results Tibial slope, trochlear depth, lateral trochlear inclination, and lateral patellar tilt angle had significant correlation with chondromalacia. Any increase in lateral trochlear inclination and lateral patellar tilt angle could increase the probability of the disease (Odds ratio [OR] 1.15, 1.13; 95% CI: 1.03-1.30; 1.02-1.26, respectively), while any increase in medial tibial slope and trochlear depth could decrease the probability of chondromalacia (OR 0.85, 0.06; 95% CI: 0.73-0.98, 0.02-0.17, respectively). We also designed a model for the severity of disease by using the patellar height index (relative odds ratio: 75.9). Conclusions The result of this study showed the novelty role of tibial anatomy in developing chondromalacia and its mechanism. We also concluded that patellar height might be an important factor in defining disease severity.

An efficient functionalization of dexamethasone-loaded polymeric scaffold with [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane coupling agent for bone regeneration: Synthesis, characterization, and in vitro evaluation

In this study, dexamethasone-loaded gelatin–starch scaffolds were fabricated by the freeze-drying technique under different cooling temperatures and polymeric compositions. The constructs were modified via [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane coupling agent in order to produce a bioactive network structure for bone tissue engineering applications. Herein, the synergistic effect of [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane and dexamethasone was examined on the bioactivity and osteogenic behavior of scaffolds. Based on scanning electron microscopy micrographs, more fine pores were formed at higher freezing temperatures. The prepared microstructure at a rapid freezing rate resulted in diminished mechanical properties and a greater level of swelling and durability compared with a slow freezing rate. According to the acquired results, the mechanical strength decreased, while both absorption capacity and mass loss rate increased as a function of starch addition. Furthermore, the enhancement of hydrophilicity and reduction of mechanical stability enhanced the dexamethasone release levels. In addition, the synthesized constructs confirmed the positive effect of [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane and dexamethasone on biomimetic mineralization of the scaffolds. Supporting the cellular adhesion and proliferation alongside the expression of alkaline phosphatase, especially in the presence of dexamethasone, was the other advantage of synthetic scaffolds as a bone reconstructive substitute. Accordingly, drug-loaded hybrid constructs seem to be promising for further preclinical and clinical investigations in bone tissue engineering.

Reduced graphene oxide: osteogenic potential for bone tissue engineering

Collagen (Col) type I, as the major component of the bone extracellular matrix has been broadly studied for bone tissue engineering. However,inferior mechanical properties limit its usage for load bearing applications. In this research, freeze dried Col scaffolds are coated with graphene oxide (GO) through a covalent bond of the amine Col with the graphene carboxyl groups. The prepared scaffolds were then reduced using a chemical agent. Scanning electron microscopy exhibited a porous structure for the synthesized scaffolds with an approximate pore size of 100-220 ± 12 µm, which is in the suitable range for bone tissue engineering application. Reducing the GO coating improved the compressive modulus of the Col from 250 to 970 kPa. Apatite formation was also indicated by immersing the scaffolds in simulated body fluid after five days. The cytocompatibility of the scaffolds, using human bone marrow-derived mesenchymal stem cells, was confirmed with MTT analysis. Alkaline phosphatase assay revealed that reducing the Col-GO scaffolds can effectively activate the differentiation of hBM-MSCs into osteoblasts after 14 days, even without the addition of an osteogenic differentiation medium. The results of this study highlight that GO and its reduced form have considerable potential as bone substitutes for orthopaedic and dental applications.

Fabrication Strategies of Scaffolds for Delivering Active Ingredients for Tissue Engineering

Designing scaffolds with optimum properties is an essential factor for tissue engineering success. They can be seeded with isolated cells or loaded with drugs to stimulate the body ability to repair or regenerate the injured tissues by acting as centers for new tissue formation. Recently, scaffolds gained a significant interest as principal candidates for tissue engineering due to overcoming the autograft or allograft's associated problems. The advancement of the tissue engineering field relies mainly on the introduction of new biomaterials for scaffolds' fabrication. This review presents and criticizes different scaffolds' fabrication techniques with particular emphasis on the fibrous, injectable in situ forming, foam, 3D freeze-dried, 3D printed, and 4D scaffolds. This article highlights on scaffolds' composition which would be beneficial for developing scaffolds that could potentially help to meet the demand for both drug delivery and tissue regeneration.

A facile method to synthesize mussel-inspired polydopamine nanospheres as an active template for in situ formation of biomimetic hydroxyapatite

In this study, Mussel-inspired polydopamine (PDA) nanospheres were synthesized via spontaneous oxidative polymerization of dopamine hydrochloride (dopa-HCl) in a deionized water-alcohol mixed solvent at room temperature and atmospheric air, under alkaline condition. Field-emission scanning electron microscopy (FE-SEM) demonstrated production of sphere-like shape with a smooth surface and tunable size, while monodispersity increased by utilizing isopropanol instead of ethanol owing to lower R_a values based on Hansen solubility parameter (HSP) theory. Dropwise addition of monomer played an undeniable role in the fabrication of uniform and smaller spheres. The difference of the charge repulsion of constructs in the range of pH led to different dispersive behavior in a variety of solvents, exhibiting versatile applications. The presence of active functional groups on the surface of PDA spheres made them an appropriate option for PDA-assisted biomimetic mineralization of hydroxyapatite (HA), which is the result of the interaction between abundant catecholamine moieties in PDA and Ca⁺² ions in simulated body fluid. Bio-adhesive nature of PDA in water and the presence of amino and hydroxyl functional groups support desirable L929 mouse fibroblast cell spreading. The viability of >90% fibroblast cells proved the biocompatibility of polymerized structure. All the achievements indicated that PDA nanospheres provide a biocompatible and bioactive template for green synthesizing hydroxyapatite and the innovative basis for further tissue engineering applications.

In vitro and in vivo investigation of PLA/PCL scaffold coated with metformin-loaded gelatin nanocarriers in regeneration of critical-sized bone defects

Large bone defects constitute a major challenge in bone tissue engineering and usually fail to heal due to the incomplete differentiation of recruited mesenchymal stem cells (MSCs) into osteogenic precursor cells. As previously proposed, metformin (MET) induces differentiation of MSCs into osteoblastic lineages in vitro. We fabricated a Poly (lactic acid) and Polycaprolactone (PLA/PCL) scaffold to deliver metformin loaded gelatin nanocarriers (MET/GNs) to critical-sized calvarial bone defects in a rat model. The scaffolds were evaluated regarding their morphology, porosity, contact angle, degradation rate, blood compatibility, biomechanical, cell viability and their osteogenic differentiation. In animal study, the defects were filled with autograft, scaffolds and a group was left empty. qRT-PCR analyses showed the expression level of osteogenic and angiogenic markers considerably increased in MET/GNs-PLA/PCL. The in vivo results showed that MET/GNs-PLA/PCL improved bone ingrowth, angiogenesis and defect reconstruction. Our results represent the applicability of MET/GNs-PLA/PCL for successful bone regeneration.