Chitosan-based gastroretentive floating drug delivery technology: an updated review

3D printing of partially-coated floating systems for controlled release of drugs into the stomach

This work focused on the development of a retentive drug delivery system (DDS) able to float in the gastric fluids and to ensure prolonged release of drugs over a pre-defined period of time, being then safely emptied from the stomach. To this end, the design step played a pivotal role. The device was thus devised to be composed of a polyvinyl alcohol-based matrix with a tapered geometry, which was partially coated with an insoluble layer of thermoplastic elastomer. This way, release of allopurinol (ALP), used as model drug, could occur only from the uncoated surfaces, while the peculiar geometry of the hydrophilic swellable/erodible matrix was intended to balance the increase in the diffusional path over time with a wider release area. In addition, the coating featured air pockets, whose volume was sized to compensate for the weight force of the DDS once immersed in gastric fluids, thus ensuring its long-lasting buoyancy. By easing the entrance of gastric fluids when the matrix is completely exhausted, such air pockets would also favor sinking and removal of the DDS from the pylorus. Given the multi-layered geometry of the final floating device, including hard-to-fabricate details (e.g. uncoated surfaces, voids), fused deposition modeling 3D printing was identified as the technique of choice for its effectiveness in manufacturing complex shapes. Various formulations were tested for fabricating both the inner matrix and the outer coating, assessing their thermo-mechanical properties, printability and release behavior. The gastro-retentive system demonstrated prolonged buoyancy (> 12 h) and a wide portfolio of ALP release performances, differing in rate and duration, which would make it a promising platform for personalized delivery of drugs in the upper gastrointestinal tract.

The design principle of natural polysaccharide hydrogels for promoting wound healing: a prospective review

Acute skin injuries and chronic non-healing wounds are common in daily life, posing significant physical trauma to patients and creating substantial social and economic burdens. Polysaccharide-based hydrogels not only maintain optimal moisture levels for wound recovery but also act as effective barriers against bacterial infection. Polysaccharides, with their unique properties such as biocompatibility, biodegradability, and non-toxicity, are promising materials for constructing hydrogels designed for wound healing. This review discusses wound physiology, key design factors for wound-healing hydrogels, and the fundamental principles of hydrogel gelation. It also provides an overview of the current applications of polysaccharide-based hydrogels-including those derived from hyaluronic acid, chitosan, sodium alginate, cellulose, glucose, and starch-as advanced wound dressings. Finally, the review outlines current challenges and future research directions for polysaccharide-based hydrogels in wound healing, aiming to inspire further exploration and innovation in this field.

Revolutionizing Parkinson's treatment: Harnessing the potential of intranasal nanoemulsions for targeted therapy

Parkinson's disease (PD) is the most prominent and highly prevalent chronic neuro-degenerative disease generally recognized by classical motor symptoms which are linked with genetic mutation, Lewy bodies, and subsequently selective loss of nigrostriatal dopaminergic neurons. The blood-brain barrier (BBB) and blood-cerebrospinal fluid barrier protect the central nervous system against toxins and are the most significant barriers to effective brain drug delivery in managing Parkinsonism. In recent years, intranasal delivery has attracted remarkable attention for brain targeting as the drug can be administered to the brain directly from the nose employing the trigeminal and olfactory pathways. For brain targeting through nasal delivery, several advanced and promising formulation techniques have been investigated globally. Nanoemulsions are regarded as an innovative carrier approach for PD, where these provide targeted administration and enhanced bioavailability of neurotherapeutics. This manuscript provides deeper insight into the pathophysiology of PD, various drug delivery strategies to overcome BBB, and the potential role of nanoemulsions via the intranasal route. Various research findings on the intranasal administration of nanoemulsions and their pivotal applications in the treatment of PD have also been embarked. The potential role of phytoconstituents and surface-modified nanoemulsions for the effective treatment of PD has also been reflected along with current challenges and future perspectives in this avenue.

A floating 3D printed polypill formulation for the coadministration and sustained release of antihypertensive drugs

Polypharmacy is a common issue, especially among elderly patients resulting in administration errors and patient inconvenience. Hypertension is a prevalent health condition that frequently leads to polypharmacy, as its treatment typically requires the co-administration of more than one different Active Pharmaceutical Ingredients (API's). To address these issues, floating hollow torus-shaped dosage forms were developed, aiming at providing prolonged gastric retention and sustained drug release. The dosage forms (polypills) containing three anti-hypertensive API's (diltiazem (DIL), propranolol (PRP) and hydrochlorothiazide (HCTZ)) were created via Fused Deposition Modelling 3D printing. A multitude of the dosage forms were loaded into a capsule and the resulting formulation achieved prolonged retention times over a 12-hour period in vitro, by leveraging both the buoyancy of the dosage forms, and the "cheerios effect" that facilitates the aggregation and retention of the dosage forms via a combination of surface tension and shape of the objects. Physicochemical characterization methods and imaging techniques were employed to investigate the properties and the internal and external structure of the dosage forms. Furthermore, an ex vivo porcine stomach model revealed substantial aggregation, adhesion and retention of the 3D printed dosage forms in porcine stomach. In vitro dissolution testing demonstrated almost complete first-order release of PRP and DIL (93.52 % and 99.9 %, respectively) and partial release of HCTZ (65.22 %) in the 12 h timeframe. Finally, a convolution-based single-stage approach was employed in order to predict the pharmacokinetic (PK) parameters of the API's of the formulation and the resemblance of their PK behavior with previously reported data.

Polysaccharide-based hydrogel promotes skin wound repair and research progress on its repair mechanism

Polysaccharides, being a natural, active, and biodegradable polymer, have garnered significant attention due to their exceptional properties. These properties make them ideal for creating multifunctional hydrogels that can be used as wound dressings for skin injuries. Polysaccharide hydrogel has the ability to both simulate the natural extracellular matrix, promote cell proliferation, and provide a suitable environment for wound healing while protecting it from bacterial invasion. Polysaccharide hydrogels offer a promising solution for repairing damaged skin. This review provides an overview of the mechanisms involved in skin damage repair and emphasizes the potential of polysaccharide hydrogels in this regard. For different skin injuries, polysaccharide hydrogels can play a role in promoting wound healing. However, we still need to conduct more research on polysaccharide hydrogels to provide more possibilities for skin damage repair.

Hydrophilic High Drug-Loaded 3D Printed Gastroretentive System with Robust Release Kinetics

Three-dimensional printing (3DP) technology enables an important improvement in the design of new drug delivery systems, such as gastroretentive floating tablets. These systems show a better temporal and spatial control of the drug release and can be customized based on individual therapeutic needs. The aim of this work was to prepare 3DP gastroretentive floating tablets designed to provide a controlled release of the API. Metformin was used as a non-molten model drug and hydroxypropylmethyl cellulose with null or negligible toxicity was the main carrier. High drug loads were assayed. Another objective was to maintain the release kinetics as robust as possible when varying drug doses from one patient to another. Floating tablets using 10–50% w/w drug-loaded filaments were obtained by Fused Deposition Modelling (FDM) 3DP. The sealing layers of our design allowed successful buoyancy of the systems and sustained drug release for more than 8 h. Moreover, the effect of different variables on the drug release behaviour was studied. It should be highlighted that the robustness of the release kinetics was affected by varying the internal mesh size, and therefore the drug load. This could represent a step forward in the personalization of the treatments, a key advantage of 3DP technology in the pharmaceutical field.

Polysaccharide-based hydrogels: New insights and futuristic prospects in wound healing

Polysaccharides elicit enormous and promising applications due to their extensive obtainability, innocuousness, and biodegradability. Various outstanding features of polysaccharides can be employed to fabricate biomimetic and multifunctional hydrogels as efficient wound dressings. These hydrogels mimic the natural extracellular matrix and also boost the proliferation of cells. Owing to distinctive architectures and abundance of functional groups, polysaccharide-derived hydrogels have exceptional physicochemical properties and unique therapeutic interventions. Hydrogels designed using polysaccharides can effectively safeguard wounds from bacterial attack. This review includes wound physiology and emphasises on numerous polysaccharide-based hydrogels for wound repair applications. Polysaccharide hydrogels for different wound types and diverse therapeutic agents loaded in hydrogels for wound repair with recent patents are portrayed in the current manuscript, debating the potential of fascinating hydrogels for effective wound healing. More research is required to engineer multifaceted advanced polysaccharide hydrogels with tuneable and adjustable properties to attain huge potential in wound healing.

All-in-One Theranostic Platform Based on Hollow Microcapsules for Intragastric-Targeting Antiulcer Drug Delivery, CT Imaging, and Synergistically Healing Gastric Ulcer

Bismuth-containing therapies are suggested as first-line and rescue alternatives for gastric ulcer (GU) treatment and Helicobacter pylori eradication. The current treatment strategy is called quadruple therapy and includes proton pump inhibitors, bismuth, and two broad-band antibiotics. This fact may affect medication compliance, leading to a resistance rate of more than 25% to clarithromycin or metronidazole. To counter this, from the perspective of natural products, an intragastric-targeting all-in-one theranostic platform is established: a drug carrier microcapsule composed of multiple synergistic antiulcer drugs, including bismuth, gallotannin, and antibiotics is obtained (BiG@MCs), and the therapeutic effects of BiG@MCs in rodent models are further evaluated. The results show that the BiG@MCs are spherical with homogeneous particle size (3 ± 0.5 µm) and can be response-released to the acidic environment of the stomach (pH 2.0-3.0), preventing the premature release of the BiG@MCs in physiological conditions. It is worth noting that the bismuth component can be easily identified by computed tomography and other detection instruments, which provide the possibility for drug tracing. In summary, these results indicate that BiG@MCs provide a versatile intragastric-targeting drug delivery platform for GU therapeutics.

Implementation and in vitro characterization of calcium-free in situ gelling oral reconstituted suspension for potential overweight treatment

In this work, oral granules that were easily dissolved in aqueous dispersion, were prepared. These oral suspensions were formulated with sodium alginate (AlgNa), chitosan (CHI) and sodium carboxymethylcellulose (CMC Na). The gels were formulated by pouring the suspensions into 150 ml of simulated gastric fluid (SGF) pH 1.2 at 37° C. The in-situ gelling mechanism was based on the ionization states of the three biopolymers as a function of the pH of the medium. Fourier transform infrared analysis of gels confirmed the interactions between alginate and chitosan. According to the scanning electron microscopy analysis, the gels were characterized by a firm and homogeneous structure. The obtained values of the elastic storage modulus, G', varied between 10 1   and 10 7 Pa. The eliminated volume of the unabsorbed liquid by the gels fluctuated between 25% and 55% of the total liquid volume. The quality of the gels was improved when a maximum concentration of alginate ( 4   g / 100   ml ) , a minimum concentration of chitosan ( 0.5   g / 100   ml ) and a maximum amount of carboxymethylcellulose ( 4   g / 100   ml ) were used. The value of their elastic modulus, G' was around 10 5 Pa and the residual unabsorbed volume of the liquid was 25% of the total liquid volume. According to the obtained results, the prepared gels could induce a feeling of fullness by stimulating the gastric distension and they could potentially be applied as anti-obesity medication.

Construction of catechol-grafted chitosan alginate/barium sulfate microcapsules for computed tomography real-time imaging and gastroretentive drug delivery

Background: The gastroretentive drug delivery system is an effective administration route, which can improve the bioavailability of the drug and the therapeutic effect by prolonging the release time of the drug and controlling the release rate in the stomach. Methods: Inspired by the excellent adhesion properties of mussel protein, we prepared novel catechol-grafted chitosan alginate/barium sulfate microcapsules (Cat-CA/BS MCs) with mucoadhesive properties and computed tomography (CT) imaging function for gastric drug delivery. First, barium sulfate nanoclusters used as CT contrast agent were synthesized in situ in the Cat-CA/BS MCs through a one-step electronic spinning method. Next, catechol-grafted chitosan as the mucoadhesive moiety was coated on the surface of Cat-CA/BS MCs by polyelectrolyte molecule self-assembly. Results: The prepared Cat-CA/BS MCs could effectively retained in the stomach for 48 hours and successively released ranitidine hydrochloride, which could be used for the treatment of gastric ulcer. Cat-CA/BS MCs exhibited superior CT contrast imaging properties for real-time tracking in vivo after oral administration. Conclusion: These findings demonstrate that Cat-CA/BS MCs serving as multifunctional oral drug carriers possess huge potential in gastroretentive drug delivery and non-invasive visualization.

Modification of Chitosan for the Generation of Functional Derivatives

Today, chitosan (CS) is probably considered as a biofunctional polysaccharide with the most notable growth and potential for applications in various fields. The progress in chitin chemistry and the need to replace additives and non-natural polymers with functional natural-based polymers have opened many new opportunities for CS and its derivatives. Thanks to the specific reactive groups of CS and easy chemical modifications, a wide range of physico-chemical and biological properties can be obtained from this ubiquitous polysaccharide that is composed of β-(1,4)-2-acetamido-2-deoxy-d-glucose repeating units. This review is presented to share insights into multiple native/modified CSs and chitooligosaccharides (COS) associated with their functional properties. An overview will be given on bioadhesive applications, antimicrobial activities, adsorption, and chelation in the wine industry, as well as developments in medical fields or biodegradability.

In Vitro and In Silico Analyses of Nicotine Release from a Gelisphere-Loaded Compressed Polymeric Matrix for Potential Parkinson's Disease Interventions

This study aimed to develop a prolonged-release device for the potential site-specific delivery of a neuroprotective agent (nicotine). The device was formulated as a novel reinforced crosslinked composite polymeric system with the potential for intrastriatal implantation in Parkinson's disease interventions. Polymers with biocompatible and bioerodible characteristics were selected to incorporate nicotine within electrolyte-crosslinked alginate-hydroxyethylcellulose gelispheres compressed within a release rate-modulating external polymeric matrix, comprising either hydroxypropylmethylcellulose (HPMC), polyethylene oxide (PEO), or poly(lactic-co-glycolic) acid (PLGA) to prolong nicotine release. The degradation and erosion studies showed that the produced device had desirable robustness with the essential attributes for entrapping drug molecules and retarding their release. Zero-order drug release was observed over 50 days from the device comprising PLGA as the external matrix. Furthermore, the alginate-nicotine interaction, the effects of crosslinking on the alginate-hydroxyethycellulose (HEC) blend, and the effects of blending PLGA, HPMC, and PEO on device performance were mechanistically elucidated using molecular modelling simulations of the 3D structure of the respective molecular complexes to predict the molecular interactions and possible geometrical orientation of the polymer morphologies affecting the geometrical preferences. The compressed polymeric matrices successfully retarded the release of nicotine over several days. PLGA matrices offered minimal rates of matrix degradation and successfully retarded nicotine release, leading to the achieved zero-order release for 50 days following exposure to simulated cerebrospinal fluid (CSF).

Development and Evaluation of Compression Coating Gastro-Floating Tablet of Alfuzosin Hydrochloride for Zero-Order Controlled Release

Alfuzosin hydrochloride is an appropriate candidate drug to prepare a gastro-retention controlled release dosage form since it demonstrates a narrow absorption window in the proximal section of the gastrointestinal tract with a short half-life. The purpose of the present study was to develop and optimize a gastro-floating tablet of alfuzosin hydrochloride by using the compression coating method for controlling drug release in a controlled manner. The floating tablets were developed utilizing hydroxypropyl methylcellulose and carbomer as matrix materials. The impact of formulation factors on buoyancy property and in vitro drug release of the floating tablet was investigated. The "similarity factor" (f₂) was used as the indicator for the optimization of the formulations. Furthermore, in vivo pharmacokinetic study in rabbits and correlation of in vitro/in vivo study were also performed. It was found that the optimized formulation F9 could float immediately less than 2 min and remain lastingly buoyant over 24 h and follow zero-order release kinetics well. In comparison with the commercially available prolonged release tablets XATRAL® XL, the prepared floating tablet exhibited similar pharmacokinetic parameters (C_max, T_max, t_1/2, and AUC_0 - t) and plasma concentration versus time profile. Moreover, it indicated from the correlation of in vitro/in vivo study that the floating tablets exhibited a good correlation of in vitro/in vivo. In summary, the compression coating gastro-floating tablets might be a promising drug delivery system for alfuzosin hydrochloride to control drug release.

Formulation and in vitro evaluation of a fast-disintegrating/sustained dual release bucoadhesive bilayer tablet of captopril for treatment of hypertension crises

Hypertension crisis is one of the main health problems and its effective treatment is of high importance. For this purpose, fast-disintegrating and sustained release formulations of captopril, as a drug of choice, were prepared using conventional mucoadhesive polymers hydroxypropyl methylcellulose (HPMC), sodium carboxymethyl cellulose (Na-CMC), hydroxypropyl cellulose (HPC), Carbopol 934 (CP934) and sodium alginate (Na-alg). The optimum sustained release formulations were selected based on mean dissolution time (MDT). The swellability and mucoadhesive properties of selected formulations were assessed and compared. A direct relationship between swelling and release rates/adhesiveness of sustained release formulations was observed. The results showed that formulations containing combination of CP934 and cellulose-based polymers had the highest swellability, sustainability and adhesion strength. These formulations prolonged drug release up to 8 h showing good fitness to Korsemeyer-Peppas model. Moreover, the adopted fast-disintegrating tablet could release up to 100% of drug within 3 min in oral pH. Finally, a dual fast-disintegrating/sustained release bucoadhesive bilayer tablet consisting of optimized formulations was prepared releasing 30% of the drug initially within 15 min and the remaining up to 8 h which could be considered as an appropriate formulation for the treatment of hypertension crises.

The design of pH-sensitive chitosan-based formulations for gastrointestinal delivery

Chitosan, a nontoxic and biocompatible polysaccharide, has been widely explored for the gastrointestinal delivery of drugs, proteins, peptides and genes for different therapeutic purposes. Because a pH gradient exists in the gastrointestinal tract, chitosan-based formulations in response to specific pH conditions, such as the low pH in the stomach and a high pH in the intestine, have been developed as a general strategy for disease diagnosis and therapy. Tailored pH-responsive drug release in the gastrointestinal tract can be achieved with various chitosan-based formulations such as nanoparticles, microspheres, hydrogels and nanocomposites. This review focuses on the most recent development of chitosan-based pH-sensitive formulations for gastrointestinal delivery, covering various types of chitosan-based formulations, their pH-responsive mechanisms and biomedical applications.

Acrylate-tethering drug carrier: covalently linking carrier to biological surface and application in the treatment of Helicobacter pylori infection

The development of carriers to sustain drugs at stomach surface is an attractive strategy to increase drug bioavailability locally and systematically. So far, the only reported carrier that can form a covalent bond with mucus, the thiolated carrier, relies on a reversible disulfide exchange reaction between thiols on the carrier and disulfide bridges on the mucus. Here we show the design and fabrication of a cellulose carrier with tethering acrylate groups (denoted here as clickable carrier) that, under a nontoxic condition, can efficiently react with thiols on biomaterials in situ through the thermodynamically driven and kinetically probable Michael thiol-ene click reaction. Here we show the attachments of the clickable carriers to a mucin protein, a surface of human laryngeal carcinoma cells, and a surface of a fresh porcine stomach. We also show that the required thiol moieties can be generated in situ by reducing existing cystine disulfide bridges with either the edible vitamin C or the relatively nontoxic tris(2-carboxyethyl) phosphine. Comparing to a control carrier, the clickable carrier can increase some drug concentrations in an ex vivo stomach tissue, and improve the Helicobacter pylori treatment in infected C57BL/6 mice.

Trimethyl and carboxymethyl chitosan carriers for bio-active polymer-inorganic nanocomposites

The carrier properties of carboxymethyl chitosan (CMC) and trimethyl chitosan (TMC) in combination with polyoxometalates (POMs) as inorganic drug prototypes are compared with respect to the influence of polymer matrix charge and structure on the emerging composites. A direct crosslinking approach with TMC and K(6)H(2)[CoW(11)TiO(40)]·13H(2)O ({CoW(11)TiO(40)}) as a representative anticancer POM affords nanocomposites with a size range of 50-90nm. The obtained POM-chitosan composites are characterized with a wide range of analytical methods, and POM encapsulation into positively charged TMC brings forward different nanocomposite morphologies and properties than CMC as a carrier material. Furthermore, uptake of fluorescein isothiocyanate (FITC) labeled POM-CMC and POM-TMC by HeLa cells was monitored, and the influence of chlorpromazine (CP) as inhibitor of the clathrin mediated pathway revealed different cellular uptake behavior of composites and pristine carriers. TMC/{CoW(11)TiO(40)} nanocomposites are taken up by HeLa cells after short incubation times around 30 min at low concentrations. The anticancer activity of pristine {CoW(11)TiO(40)} and its TMC-nanocomposites was investigated in vitro with MTT assays and compared to a reference POM.

Preparation and evaluation of gastroretentive floating pellets of metronidazole using Na-alginate and hydroxyl propyl methyl cellulose polymers

Gastroretentive floating pellets of metronidazole were formulated to prolong the gastric residence time in order to obtain controlled release characteristics of the drug. Nine formulations of metronidazole floating pellets such as AX, BX, CX, AY, BY, CY, AZ, BZ and CZ were prepared by extrusion method using different quantities of hydroxyl propyl methyl cellulose (HPMC) polymers such as methocel K4M premium and methocel K100LV premium in the ratio of 2:1, 1:2 and 1.5:1.5 while the amount of Na-alginate used in the formulations was 3.50, 5.25 and 7.0 g, respectively. The in vitro dissolution studies were carried out in 900 mL of phosphate buffer (pH 1.2) at 37 +/- 0.5 degrees C and 50 rpm for 6 h using USP XXIV paddle method and the content of drug release was done by UV spectrophotometer at 277 nm. It was found that the percent release of metronidazole from different formulations was different with passing of time. The drug release profile of the formulation (AX) having Na-alginate 3.50 g methocel K4M premium and methocel K100LV premium in the ratio of 2:1 showed best fit to Higuchi release kinetics with R2 value of 0.994. Finally, it might be concluded that the polymers had significant effect on drug release kinetics of metronidazole from floating pellets. The selection and use of suitable polymers in appropriate ratio might be very important in designing floating pellets and using the capabilities of these polymers, suitable floating pellets of metronidazole with desirable release rate could be formulated. Thus, in vivo research studies by the future researchers will confirm the appropriateness of these formulated metronidazole floating pellets.