An injectable nucleus pulposus cell-modified decellularized scaffold: biocompatible material for prevention of disc degeneration

Biomimetic gradient scaffolds for the tissue engineering and regeneration of rotator cuff enthesis

Rotator cuff tear is one of the most common musculoskeletal disorders, which often results in recurrent shoulder pain and limited movement. Enthesis is a structurally complex and functionally critical interface connecting tendon and bone that plays an essential role in maintaining integrity of the shoulder joint. Despite the availability of advanced surgical procedures for rotator cuff repair, there is a high rate of failure following surgery due to suboptimal enthesis healing and regeneration. Novel strategies based on tissue engineering are gaining popularity in improving tendon-bone interface (TBI) regeneration. Through incorporating physical and biochemical cues into scaffold design which mimics the structure and composition of native enthesis is advantageous to guide specific differentiation of seeding cells and facilitate the formation of functional tissues. In this review, we summarize the current state of research in enthesis tissue engineering highlighting the development and application of biomimetic scaffolds that replicate the gradient TBI. We also discuss the latest techniques for fabricating potential translatable scaffolds such as 3D bioprinting and microfluidic device. While preclinical studies have demonstrated encouraging results of biomimetic gradient scaffolds, the translation of these findings into clinical applications necessitates a comprehensive understanding of their safety and long-term efficacy.

Comparison of temporomandibular joint disc, meniscus, and intervertebral disc in fundamental characteristics and tissue engineering

The temporomandibular joint (TMJ) disc, meniscus and intervertebral disc (IVD) are three fibrocartilage discs, which play critical roles in our daily life. Their degeneration contributes to diseases such as TMJ disorders, osteoarthritis and degenerative disc disease, affecting patients' quality of life and causing substantial morbidity and mortality. Interestingly, similar in some aspects of fundamental characteristics, they exhibit differences in other aspects such as biomechanical properties. Highlighting these similarities and differences can not only benefit a comprehensive understanding of them and their pathology but also assist in future research of tissue engineering. Likewise, comparing their tissue engineering in cell sources, scaffold and stimuli can guide imitation and improvement of their engineered discs. However, the anatomical structure, function, and biomechanical characteristics of the IVD, TMJ, and Meniscus have not been compared in any meaningful depth needed to advance current tissue engineering research on these joints, resulting in incomplete understanding of them and their pathology and ultimately limiting future research of tissue engineering. This review, for the first time, comprehensively compares three fibrocartilage discs in those aspects to cast light on their similarities and differences.

Nucleus pulposus cell-derived efficient microcarrier for intervertebral disc tissue engineering

Adipose-derived stem cells (ADSCs) show great potential for the treatment of intervertebral disc (IVD) degeneration. An ideal carrier is necessary to transplant ADSCs into degenerated IVDs without influencing cell function. Nucleus pulposus cells (NPCs) can synthesize and deposit chondroitin sulfate and type II collagen which are NP-specific extracellular matrix (ECM) and can also regulate the NP-specific differentiation of stem cells. Bioscaffolds fabricated based on the ECM synthesis functions of NPCs have possible roles in cell transplantation and differentiation induction, but it has not been studied. In this study, we first aggregated NPCs into pellets, and then, NPC-derived efficient microcarriers (NPCMs) were fabricated by pellet cultivation under specific conditions and optimized decellularization. Thirdly, we evaluated the microstructure, biochemical composition, biostability and cytotoxicity of the NPCMs. Finally, we investigated the NP-specific differentiation of ADSCs induced by the NPCMsin vitroand NP regeneration induced by the ADSC-loaded NPCMs in a rabbit model. The results indicated that the injectable NPCMs retained maximal ECM and minimal cell nucleic acid after optimized decellularization and had good biostability and no cytotoxicity. The NPCMs also promoted the NP-specific differentiation of ADSCsin vitro. In addition, the results of MRI, x-ray, and the structure and ECM content of NP showed that the ADSCs-loaded NPCMs can partly restored the degenerated NPin vivo. Our injectable NPCMs regenerated the degenerated NP and provide a simplified and efficient strategy for treating IVD degeneration.

Decellularized matrix for repairing intervertebral disc degeneration: Fabrication methods, applications and animal models

Intervertebral disc degeneration (IDD)-induced low back pain significantly influences the quality of life, placing a burden on public health systems worldwide. Currently available therapeutic strategies, such as conservative or operative treatment, cannot effectively restore intervertebral disc (IVD) function. Decellularized matrix (DCM) is a tissue-engineered biomaterial fabricated using physical, chemical, and enzymatic technologies to eliminate cells and antigens. By contrast, the extracellular matrix (ECM), including collagen and glycosaminoglycans, which are well retained, have been extensively studied in IVD regeneration. DCM inherits the native architecture and specific-differentiation induction ability of IVD and has demonstrated effectiveness in IVD regeneration in vitro and in vivo. Moreover, significant improvements have been achieved in the preparation process, mechanistic insights, and application of DCM for IDD repair. Herein, we comprehensively summarize and provide an overview of the roles and applications of DCM for IDD repair based on the existing evidence to shed a novel light on the clinical treatment of IDD.

Evaluation of Tissue Engineering Approaches for Intervertebral Disc Regeneration in Relevant Animal Models

Translation of tissue engineering strategies for the regeneration of intervertebral disc (IVD) requires a strong understanding of pathophysiology through the relevant animal model. There is no relevant animal model due to differences in disc anatomy, cellular composition, extracellular matrix components, disc physiology, and mechanical strength from humans. However, available animal models if used correctly could provide clinically relevant information for the translation into humans. In this review, we have investigated different types of strategies for the development of clinically relevant animal models to study biomaterials, cells, biomolecular or their combination in developing tissue engineering-based treatment strategies. Tissue engineering strategies that utilize various animal models for IVD regeneration are summarized and outcomes have been discussed. The understanding of animal models for the validation of regenerative approaches is employed to understand and treat the pathophysiology of degenerative disc disease (DDD) before proceeding for human trials. These animal models play an important role in building a therapeutic regime for IVD tissue regeneration, which can serve as a platform for clinical applications.

Proper animal experimental designs for preclinical research of biomaterials for intervertebral disc regeneration

Low back pain is a vital musculoskeletal disease that impairs life quality, leads to disability and imposes heavy economic burden on the society, while it is greatly attributed to intervertebral disc degeneration (IDD). However, the existing treatments, such as medicines, chiropractic adjustments and surgery, cannot achieve ideal disc regeneration. Therefore, advanced bioactive therapies are implemented, including stem cells delivery, bioreagents administration, and implantation of biomaterials etc. Among these researches, few reported unsatisfying regenerative outcomes. However, these advanced therapies have barely achieved successful clinical translation. The main reason for the inconsistency between satisfying preclinical results and poor clinical translation may largely rely on the animal models that cannot actually simulate the human disc degeneration. The inappropriate animal model also leads to difficulties in comparing the efficacies among biomaterials in different reaches. Therefore, animal models that better simulate the clinical charateristics of human IDD should be acknowledged. In addition, in vivo regenerative outcomes should be carefully evaluated to obtain robust results. Nevertheless, many researches neglect certain critical characteristics, such as adhesive properties for biomaterials blocking annulus fibrosus defects and hyperalgesia that is closely related to the clinical manifestations, e.g., low back pain. Herein, in this review, we summarized the animal models established for IDD, and highlighted the proper models and parameters that may result in acknowledged IDD models. Then, we discussed the existing biomaterials for disc regeneration and the characteristics that should be considered for regenerating different parts of discs. Finally, well-established assays and parameters for in vivo disc regeneration are explored.

The application of decellularized nucleus pulposus matrix/chitosan with transforming growth factor β3 for nucleus pulposus tissue engineering

Low back pain caused by intervertebral disc degeneration has become a global problem that seriously affects public health. The application of nucleus pulposus tissue engineering to disc degeneration has attracted increasing attention. A scaffold is important for nucleus pulposus tissue engineering, which provides a three-dimensional growth space with an appropriate biomechanical and biochemical microenvironment for seed cell differentiation and proliferation. In this study, a decellularized nucleus pulposus matrix/chitosan (DNPM/chitosan) hydrogel scaffold was prepared with crosslinker genipin. Nucleus pulposus stem cells (NPSCs) were cultured in hybrid hydrogels with or without transforming growth factor-β3 (TGF-β3) and then cell morphology, proliferation, and nucleus pulposus-related gene expression were analyzed. TGF-β3 was successfully incorporated into the DNPM/chitosan hydrogel and NPSCs grew well on both kinds of hydrogel. Moreover, gene expression of collagen-I, collagen-II, and aggrecan was enhanced in the DNPM/chitosan hydrogel with TGF-β3. These results indicate that the DNPM/chitosan hybrid hydrogel is a promising candidate scaffold for nucleus pulposus tissue engineering.

Characterization of biomaterials intended for use in the nucleus pulposus of degenerated intervertebral discs

Biomaterials for regeneration of the intervertebral disc must meet complex requirements conforming to biological, mechanical and clinical demands. Currently no consensus on their characterization exists. It is crucial to identify parameters and their method of characterization for accurate assessment of their potential efficacy, keeping in mind the translation towards clinical application. This review systematically analyses the characterization techniques of biomaterial systems that have been used for nucleus pulposus (NP) restoration and regeneration. Substantial differences in the approach towards assessment became evident, hindering comparisons between different materials with respect to their suitability for NP restoration and regeneration. We have analysed the current approaches and identified parameters necessary for adequate biomaterial characterization, with the clinical goal of functional restoration and biological regeneration of the NP in mind. Further, we provide guidelines and goals for their measurement. STATEMENT OF SIGNIFICANCE: Biomaterials intended for restoration of regeneration of the nucleus pulposus within the intervertebral disc must meet biological, biomechanical and clinical demands. Many materials have been investigated, but a lack of consensus on which parameters to evaluate leads to difficulties in comparing materials as well as mostly partial characterization of the materials in question. A gap between current methodology and clinically relevant and meaningful characterization is prevalent. In this article, we identify necessary methods and their implementation for complete biomaterial characterization in the context of clinical applicability. This will allow for a more unified approach to NP-biomaterials research within the field as a whole and enable comparative analysis of novel materials yet to be developed.

Ethanol-mediated compaction and cross-linking enhance mechanical properties and degradation resistance while maintaining cytocompatibility of a nucleus pulposus scaffold

Intervertebral disc degeneration is a complex, cell-mediated process originating in the nucleus pulposus (NP) and is associated with extracellular matrix catabolism leading to disc height loss and impaired spine kinematics. Previously, we developed an acellular bovine NP (ABNP) for NP replacement that emulated human NP matrix composition and supported cell seeding; however, its mechanical properties were lower than those reported for human NP. To address this, we investigated ethanol-mediated compaction and cross-linking to enhance the ABNP's dynamic mechanical properties and degradation resistance while maintaining its cytocompatibility. First, volumetric and mechanical effects of compaction only were confirmed by evaluating scaffolds after various immersion times in buffered 28% ethanol. It was found that compaction reached equilibrium at ~30% compaction after 45 min, and dynamic mechanical properties significantly increased 2-6× after 120 min of submersion. This was incorporated into a cross-linking treatment, through which scaffolds were subjected to 120 min precompaction in buffered 28% ethanol prior to carbodiimide cross-linking. Their dynamic mechanical properties were evaluated before and after accelerated degradation by ADAMTS-5 or MMP-13. Cytocompatibility was determined by seeding stem cells onto scaffolds and evaluating viability through metabolic activity and fluorescent staining. Compacted and cross-linked scaffolds showed significant increases in DMA properties without detrimentally altering their cytocompatibility, and these mechanical gains were maintained following enzymatic exposure. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2488-2499, 2019.

Roles of miR-494 in Intervertebral Disk Degeneration and the Related Mechanism

OBJECTIVE

In this study, we focused on the regulatory roles of miR-494 in the pathogenesis of intervertebral disk degeneration (IDD) and the related mechanism.

METHODS

First, rat IDD models were established, and the expression levels of miR-494 in IDDs of the rats were examined. Next, human nucleus pulposus (NP) cells were cultured and transfected with miR-494 mimics and inhibitors, and the roles of miR-494 on the proliferation and apoptosis of cells were determined using MTT cell proliferation assay and flow cytometry methods. Furthermore, the targeting relationship between miR-494 and neuro-oncological ventral antigen 1 (NOVA1) was examined by dual luciferase reporter assay. Finally, the expression of NOVA1, Caspase-3, Bcl-2-associated X protein (BAX), and B-cell lymphoma-2 (BCL-2) was examined using real-time quantitative polymerase chain reaction and western blot methods.

RESULTS

The results demonstrated that the expression of miR-494 was significantly upregulated in IDD rats. Moreover, transfection of miR-494 inhibitors induced a significant increase in the proliferation and marked decrease in the apoptosis of the degenerated human NP cells. Transfection of miR-494 mimics has shown the opposite effects. Furthermore, NOVA1 has been confirmed as a target of miR-494, and the expressions of NOVA1 were significantly downregulated in IDD rats. In addition, transfection of miR-494 inhibitors significantly decreased the expression of Caspase-3 and BAX and markedly increased the expression of NOVA1 and BCL-2. Transfection of miR-494 mimics has shown the opposite effects.

CONCLUSIONS

miR-494 was upregulated in IDD, and miR-494 might regulate the proliferation and apoptosis of NP cells through targeting NOVA1.

Evaluating the angiogenic potential of a novel temperature-sensitive gel scaffold derived from porcine skeletal muscle tissue

Our previous study fabricated decellularized porcine muscle tissues (DPMTs) and demonstrated that DPMTs with few cell residues possess highly preserved protein components and good biocompatibility. In the physical state, skeletal muscle equips an abundant vascular network due to the vast demand of energy from aerobic metabolism. Vascular bioactive factors which are rich in skeletal muscle tissues may contribute to the angiogenic effect of DPMTs. However, implanting DPMTs in vivo in a less invasive way is unfeasible. Hence, the purpose of this study was to fabricate DPMTs into hydrogel and investigate the effects of DPMT gel on promoting neovessel formation in vitro and in vivo. The results demonstrated that the surface topographies of the DPMT gel were looser and more homogeneous than the DPMTs. The rates of retained VEGF, bFGF, and PDGF-BB in DPMT gel were almost half of the corresponding content in fresh skeletal muscle tissues. Human umbilical endothelial cells displayed better proliferation ability and enhanced the formation of neovascular loops when seeded on DPMT gel compared to small intestinal submucosa gels at the same concentration of 2% (W/V). Furthermore, the increased neovessel formation was detected after subcutaneous injection of DPMT gel. Taken together, these findings suggested that DPMT gel may possess the potential of promoting neovascular formation.

Fetal subcutaneous cells have potential for autologous tissue engineering

Major congenital malformations affect up to 3% of newborns. Infants with prenatally diagnosed soft tissue defects should benefit from having autologous tissue readily available for surgical implantation in the perinatal period. In this study, we investigate fetal subcutaneous cells as cellular source for tissue engineering. Fetal subcutaneous biopsies were collected from elective terminations at gestational Week 20-21. Cells were isolated, expanded, and characterized in vitro. To determine cell coverage, localization, viability, and proliferation in different constructs, the cells were seeded onto a matrix (small intestine submucosa) or in collagen gel with or without poly(ε-caprolactone) mesh and were kept in culture for up to 8 weeks before analysis. Angiogenesis was analysed through a tube-forming assay. Fetal subcutaneous cells could be expanded until 43 ± 3 population doublings, expressed mesenchymal markers, and readily differentiate into adipogenic and osteogenic lineages. The cells showed low adherence to small intestine submucosa and did not migrate deep into the matrix. However, in collagen gels, the cells migrated into the gel and proliferated with sustained viability for up to 8 weeks. The cells in the matrices expressed Ki67, CD73, and α-smooth muscle actin but not cytokeratin or CD31. Fetal cells derived from subcutaneous tissue demonstrated favourable characteristics for preparation of autologous tissue transplants before birth. Our study supports the theory that cells could be obtained from the fetus during pregnancy for tissue engineering purposes after birth. In a future clinical situation, autologous transplants could be used for reconstructive surgery in severe congenital malformations.

The role of lncRNA MALAT1 in intervertebral degenerative disc disease

Intervertebral degenerative disc disease (IDDD) is a common disease in clinic that causes pain and heavy financial burden on patients with poor prognosis. However, the pathogenesis of IDDD is not clear. Long non-coding RNA (LncRNA) is involved in regulating various body growth and pathological processes by affecting cell proliferation, differentiation, and apoptosis. However, the role of lncRNAs in IDDD is rarely reported. This study aims to investigate the role and mechanism of lncRNA MALAT1 in the development of IDDD. The nucleus pulposus of the intervertebral disc were collected and the primary nucleus pulposus cells were isolated and cultured. The cells were divided into three groups, including IDDD group, empty plasmid group transfected by pcDNA3.1, or MALAT1 group transfected by pcDNA3.1-MALAT1. MALAT1 expression was detected by real-time PCR. Cell proliferation was assessed by MTT assay. Caspase 3 activity was tested by the activity detection kit. IL-1 and IL-6 levels were analyzed by ELISA. The expression of MALAT1 in IDDD nucleus pulposus cells was significantly lower than that in control group (P < 0.05). The expression of MALAT1 was significantly increased after transfection with pcDNA3.1-MALAT1 plasmid in IDDD nucleus pulposus cells, which obviously inhibited cell proliferation, enhanced Caspase 3 activity, and promoted the secretion of IL-1 and IL-6 compared with IDDD group (P < 0.05). MALAT1 level decreased in IDDD nucleus pulposus cells. Upregulation of MALAT1 expression restrained IDDD through suppressing inflammation; inhibiting nucleus pulposus cell apoptosis, and promoting cell proliferation.