Late Dislocation Following Total Hip Arthroplasty: Spinopelvic Imbalance as a Causative Factor

Dislocation incidence and risk factors following direct anterior primary total hip arthroplasty: a consecutive, single-surgeon cohort

BACKGROUNDS

Dislocation is one of the debilitating complications of total hip arthroplasty. It is a common reason for revision surgery after THA, along with other complications such as infection and instability. This study determined the incidence and risk factors of dislocation after primary total hip arthroplasty using the direct anterior approach.

METHODS

Retrospective Data from patients who underwent primary THA from 2013 to 2020 was analyzed. Anteversion and inclination angles were extracted from their imaging studies, and demographic data were also recorded from their medical records. Data were analyzed using SPSS version 26.

RESULTS

One thousand two hundred four cases of THA were reviewed in our study. 31 (2.57%) dislocations happened after a minimum follow-up of five years. Our study showed that DDH diagnosis as the underlying condition, using Wagner Cone and Wagner SL stem, cup size smaller than 52, head size smaller than 34, anteversion and inclination angle outside the Lewinnek safe zone can be risk factors for dislocation. Primary OA and Fitmore stem acted as protective factors for dislocation.

CONCLUSION

In the DA approach, the underlying disease, properties of the prosthesis used such as cup and head size, stem type, and anteversion and inclination angles can be the potential risk factors for dislocation.

LEVEL OF EVIDENCE

III.

Does Replication of Native Acetabular Anatomy Satisfy Recommended Hip-Spine Targets for Cup Orientation?

Background

The aim of this study was to assess whether replication of native acetabular anatomy would satisfy cup orientation targets using 3 commonly described hip-spine algorithms. Whether spinopelvic characteristics influence ability to achieve cup orientation targets when replicating native anatomy and the agreement between algorithm recommendations was tested.

Methods

A prospective database was queried to identify patients with adverse (n = 70) spinopelvic characteristics. These were matched for age and sex with patients without adverse characteristics (n = 70). Spinopelvic characteristics were obtained from radiographs and computed tomography (CT) scans. CT scans were segmented to determine native acetabular anatomy, particularly anteversion. Three hip-spine planning algorithms were evaluated for each patient (Optimized Positioning System [OPS], Combined-Sagittal Index [CSI], Hip-Spine Classification). Differences between target orientations and native anatomy were determined. Agreement between algorithms was tested.

Results

OPS plan had significantly reduced inclination compared with native (39° vs. 52°, p < 0.001). No significant difference between OPS and native anteversions was seen (18° vs. 18°, p = 0.1) for the adverse group. OPS-planned anteversion was greater than native (23° vs. 16°, p < 0.001) in the nonadverse group. Most native orientations met published CSI targets (90% nonadverse, 59% adverse). Most native acetabular orientations (61% adverse and 58% nonadverse) failed to meet Hip-Spine Classification targets. Overall, in 88% of cases, replication of native acetabular version and 40° of inclination satisfied at least one suggested target. Agreement of all 3 algorithms was 31%; greater agreement was seen between Hip-Spine Classification and OPS (64%).

Conclusions

Native acetabular anteversion and radiographic inclination of 40° are reliable targets, satisfying at least one hip-spine algorithm and thus justifying such practice, when advanced hip-spine analysis is not performed. The discrepancy between suggested orientations by the various published techniques, despite their validated low dislocation rates, emphasizes that although achieving a target cup orientation is important, the nature of hip stability is multifactorial and merits a holistic approach.

Achieving cup target as per spinopelvic assessment is associated with improved THA outcome: a prospective, multicentre study

BACKGROUND

Different methods can help to optimise sagittal cup orientation in total hip arthroplasty (THA) based on individual spinopelvic characteristics. This study aimed to: (1) assess how often combined sagittal index (CSI) and hip-spine-classification targets were achieved post THA; (2) compare anteversion/inclination between cups in-/outside optimal CSI zone; and (3) determine association with outcome.

METHODS

This is a multicentre, prospective, case-cohort study of 435 primary THA for osteoarthritis (53% females; age: 65 ± 12 years; follow-up: 2.4 ± 0.6 years) (58% lateral, 29% anterior, 13% posterior approach). No robotics or dual-mobility were used. Patients underwent spinopelvic radiographs to measure parameters including lumbar lordosis (LL), sacral slope (SS), pelvic tilt (PT), pelvic incidence (PI), pelvic femoral angle (PFA), and ante-inclination (AI) on lateral spinopelvic radiographs. Unbalanced spine was defined as PI - LL ⩾ 10° (PI: pelvic incidence; LL: lumbar lordosis), stiffness as ∆LL < 20°. Optimal cup orientation was based on CSI targets: 205-245° for balanced spine (n = 327), or 215-235° for unbalanced spine (n = 108), hip-spine classification targets (±5°), and conventional inclination/anteversion (40/20° ± 10°) target. Patient-reported outcome was measured using Oxford Hip Score (OHS).

RESULTS

CSI targets were achieved in 60% (n = 261/435), whilst 44% had cup position within hip-spine classification targets (n = 125/284). Anteversion was higher among cups within CSI targets (26° ± 8° vs. 22° ± 10°; p < 0.001). Overall dislocation rate was 0.9% (n = 4/435), without difference whether CSI targets were achieved (0.4% vs. 1.7%; p = 0.178). Postoperative OHS was better among those within CSI targets (42 ± 8 vs. 40 ± 9; p = 0.003) or within hip-spine-classification targets (p = 0.028), but not according to conventional orientation (p = 0.384).

CONCLUSIONS

Awareness of adverse spinopelvic characteristics and using sagittal characteristics (especially CSI) can help surgeons to achieve optimal cup orientation, improving outcome and reducing dislocation risk post-THA.

Acetabular component position significantly influences the rebalancing of pelvic sagittal inclination following total hip arthroplasty in patients with Crowe type III/IV developmental dysplasia of the hip

Aims

Sagittal lumbar pelvic alignment alters with posterior pelvic tilt (PT) following total hip arthroplasty (THA) for developmental dysplasia of the hip (DDH). The individual value of pelvic sagittal inclination (PSI) following rebalancing of lumbar-pelvic alignment is unknown. In different populations, PT regresses in a linear relationship with pelvic incidence (PI). PSI and PT have a direct relationship to each other via a fixed individual angle ∠γ. This study aimed to investigate whether the new PI created by acetabular component positioning during THA also has a linear regression relationship with PT/PSI when lumbar-pelvic alignment rebalances postoperatively in patients with Crowe type III/IV DDH.

Methods

Using SPINEPARA software, we measured the pelvic sagittal parameters including PI, PT, and PSI in 61 patients with Crowe III/IV DDH. Both PSI and PT represent the pelvic tilt state, and the difference between their values is ∠γ (PT = PSI + ∠γ). The regression equation between PI and PT at one year after THA was established. By substituting ∠γ, the relationship between PI and PSI was also established. The Bland-Altman method was used to evaluate the consistency between the PSI calculated by the linear regression equation (ePSI) and the actual PSI (aPSI) measured one year postoperatively.

Results

The mean PT and PSI changed from preoperative values of 7.0° (SD 6.5°) and -8.0° (SD 6.7°), respectively, to 8.4° (SD 5.5°) and -4.5° (SD 5.9°) at one year postoperatively. This change shows that the pelvis tilted posteriorly following THA. In addition, when lumbar-pelvic alignment rebalanced, the linear regression equation between PI and PT was PT = 0.45 × PI - 10.5°, and PSI could be expressed as PSI = 0.45 × PI - 10.5° - ∠γ. The absolute difference between ePSI and aPSI was less than 5° in 55 of 61 patients (90.16%).

Conclusion

The new PI created by the positioning of the acetabular component significantly affects the PSI when lumbar-pelvic alignment changes and rebalances after THA in patients with Crowe III/IV DDH.

Change in spinopelvic mobility 3 months after THA using a direct anterior approach

INTRODUCTION

Spinopelvic kinematics, reflected by the change in spinopelvic tilt (ΔSPT) from a standing position to a flexed seated position, has been associated with the risk of prosthetic impingement and hip dislocation. Some studies have suggested changes in spinopelvic mobility after total hip arthroplasty (THA), but none have explored changes in mobility in the first three months following THA using a direct anterior approach.

HYPOTHESIS

Our hypothesis was that changes in spinopelvic mobility occur in the first 3 months postoperatively, leading to increased hip mobility and increased spinopelvic kinematic abnormalities.

METHODS

This retrospective analysis of a consecutive series included 109 patients treated with primary anterior THA by a single senior surgeon. Lateral radiographs taken in standing and flexed seated positions before and three months after surgery were examined to analyze ΔSPT, pelvic femoral angle (PFA), lumbar lordosis (LL), and abnormal spinopelvic mobility (ΔSPT ≥20 °). Secondary objectives included examining the relationship between changes in lumbar flexion and hip flexion, and then analyzing preoperative spinopelvic parameters involved in postoperative pelvic mobility changes.

RESULTS

Between the two periods of analysis, the ΔSPT increased on average by 9.53 ° (-34.4/50.3 °), the ΔPFA increased by 7.68 ° (-74/49 °), and lumbar flexion (ΔLL) decreased by 4.26 ° (-20.8/26 °). The rate of ΔSPT ≥20 ° was 22.9% before the operation and 47.7% after the operation (OR = 8.98; CI [2.82; 28.56]; p < 0.001). A strong positive correlation was found between changes in ΔSPT and ΔPFA (ρ = 0.76; r2 = 0.574; p < 0.001) and no correlation between changes in ΔSPT and ΔLL (ρ=-0.019; r2 = 0.005; p = 0.842). The multivariate analysis demonstrated independent predictors of change in ΔSPT were body mass index (BMI, β = -0.59, [-1.15; -0.03], p = 0.0386), ΔPFA (β = -0.46, [-0.59; -0.34], p < 0.001), and ΔLL (β = -0.36, [-0.53; -0.19], p < 0.001). No dislocation was observed.

CONCLUSIONS

Spinopelvic mobility changes occur early on, within 3 months, after anterior THA. Patients with preoperative lumbar stiffness, associated with a stiff hip and lower BMI, should prompt surgeons to the risk of worsening spinopelvic kinematic abnormalities postoperatively.

LEVEL OF EVIDENCE

IV; retrospective study.

Lewinnek zone not "the be-all and end-all" functional planning for acetabular component positioning in total hip arthroplasty

BACKGROUND

Proper positioning of a total hip arthroplasty (THA) plays a crucial role in the success and long-term survivorship of the implant. Cup positioning within the Lewinnek Safe Zone (LSZ) does not, however, avoid implant dislocation. Thus, the concept of a functional cup position has been introduced. The purpose of this study was to assess the discrepancy between LSZ and the acetabular cup position suggested by the patient's specific functional planning. The hypothesis was that a mismatch does exist.

METHODS

One hundred consecutive patients with primary hip osteoarthritis undergoing primary THA with a personalized functional preoperative planning and patient-specific cup implantation system were enrolled. Anatomical and spino-pelvic functional parameters were recorded and, for each patient, a "safe cup orientation" was suggested. The suggested functional safe zone was compared to the LSZ.

RESULTS

The mean suggested inclination was 39° ± 3° (range 32°-45°). The mean suggested anteversion was 21° ± 3° (range 12°-28°). The patient's functional acetabular inclination (AI) corresponded to the LSZ in one of the 100 patients, whereas the acetabular anteversion (AV) was outside the LSZ in 8 of the 100 patients. The mean pelvic tilt while standing and sitting were 0.5° ± 7° (range 21°-45°) and -6° ± 16.7° (range -63°-33°), respectively. The mean pelvic incidence was 52° ± 9.7° (range 33°-83°).

CONCLUSION

When a functional patient's specific preoperative planning is performed, the LZS does not correspond to the patient's functional safe zone in about 8% of patients. The concept of a universal safe zone should be revisited, and a functional personalized safe zone may have to be more widely considered.

Variations in pelvic tilt between relaxed-seated and flexed-seated positions affect stability assessment in 3D modelling in total hip replacement

BACKGROUND

The spinopelvic axis is becoming recognized as an essential contributor to impingement and instability leading to dislocation. Computer-assisted hip surgery uses standing and relaxed-seated radiographs as a surrogate marker of pelvic tilt in all seated positions. However, the flexed-seated position is a high-risk position for dislocation, and the standing and relaxed-seated radiographs may not reflect this risk. This study aims to determine whether adding a flexed-seated radiograph affects stability assessment in 3D modelling of THR.

METHODS

Ninety patients with osteoarthritis underwent computer-assisted THR and received standing, relaxed-seated, and flexed-seated radiographs. Sacral slope (SS) was measured and analysed using Pearson correlation. Key measures were degree of tilt between positions, as well as correlations between dynamic hip movements.

RESULTS

Of the examined patients, 96.7% anteriorly tilted their pelvis moving from relaxed-seated to flexed-seated, and 50% of patients anteriorly tilted by >10° SS. There was a moderate correlation between standing SS and flexed-seated SS (r = 0.33, P ≤ 0.1). There was a strong correlation between relaxed-seated SS and flexed-seated SS (r = 0.77, P ≤ 0.001); however, there was a wide variance of flexed-seated SS for any given relaxed-seated or standing SS.

CONCLUSION

The flexed-seated position poses a higher risk of anterior impingement in 96.7% of patients compared to the relaxed seated-position. The flexed-seated position cannot be predicted by existing radiographs, making it a valuable marker in surgical planning to mitigate the risk of hip instability.

Hip Arthroscopy Patients With Lower Back Pain Show Delayed Clinical Improvement and Inferior Time-Dependent Survivorship: A Propensity Matched Study at Mid-Term Follow-Up

PURPOSE

To evaluate patient-reported outcomes (PROs) and survivorship at mid-term follow-up after hip arthroscopy (HA) for femoroacetabular impingement syndrome (FAIS) in patients with and without preoperative lower back pain (LBP).

METHODS

Patients with self-endorsed preoperative LBP who underwent HA for FAIS with mid-term follow-up were identified and propensity matched 1:1 to patients without back pain by age, sex, and body mass index (BMI). PROs collected preoperatively and at postoperative years 1, 2, and 5 included Hip Outcome Score-Activities of Daily Living (HOS-ADL) and Hip Outcome Score-Sports Subscale (HOS-SS), 12-item International Hip Outcome Tool (iHOT-12), modified Harris Hip Score (mHHS), and Visual Analog Scale (VAS) for Pain. Achievement of minimal clinically important difference (MCID) and patient acceptable symptom state (PASS) were compared. Survivorship was compared with Kaplan-Meier analysis.

RESULTS

In total, 119 patients with LBP were matched to 119 patients without LBP. Group demographic factors were as follows: age (37.4 ± 11.9 vs 37.6 ± 12.6 years, P = .880), sex (64.4% vs 67.7% female, P = .796), and BMI (25.3 ± 5.1 vs 25.3 ± 5.4, P = .930). Average follow-up duration was 6.0 ± 1.9 years. LBP patients showed similar preoperative PROs, yet lower 1-year scores for all PROs (P ≤ .044). At final follow-up, similar PROs were shown between groups (P ≥ .196). LBP and non-LBP patients had similar MCID achievement for HOS-ADL (59.3% vs 63.1%, P = .640), HOS-SS (73.9% vs 70.8%, P = .710), mHHS (66.7% vs 73.4%, P = .544), iHOT-12 (85.1% vs 79.4%, P = .500), and VAS Pain (75.6% vs 69.9%, P = .490). Groups also had similar PASS achievement for HOS-ADL (63.5% vs 61.3%, P = .777), HOS-SS (57.0% vs 62.5%, P = .461), mHHS (81.9% vs 79.1%, P = .692), iHOT-12 (54.6% vs 61.2%, P = .570), and VAS Pain (51.0% vs 55.4%, P = .570). Additionally, achievement of MCID ≥ 1 PRO (P ≥ .490) and PASS ≥ 1 PRO (P ≥ .370) was similar across groups. Conversion to total hip arthroplasty occurred in 3.4% of hips with LBP and 0.8% of hips without LBP (P = .370). Back pain patients demonstrated inferior time-dependent survivorship compared with patients without back pain on Kaplan-Meier survival analysis (P = .023).

CONCLUSIONS

Patients undergoing primary hip arthroscopy for FAIS with LBP achieve comparable PROs and clinically significant outcomes to patients without back pain at mid-term, despite lower 1-year PRO scores. LBP patients show inferior reoperation-free time-dependent survivorship compared with those without LBP.

LEVEL OF EVIDENCE

Level III, retrospective comparative case series.

Radiographic Subluxation Following Total Hip Arthroplasty in Flexed-Seated Position: A Report of 3 Cases

CASE

We present 3 cases demonstrating radiographic posterior subluxation in lateral functional radiographs taken in the flexed-seated position. Two of the patients were asymptomatic, and 2 showed the posterior translation of the femoral head, which is almost a dislocation, with spontaneous reduction. The subluxation can occur not only in patients after lumbar fusion surgery but also in patients with relatively normal lumbar spine due to excessive hip flexion.

CONCLUSION

Functional lateral radiographic assessment in the flexed-seated position may be useful in detecting asymptomatic subluxation and identifying patients at high risk of dislocation after THA.

Hip-lumbar mobility loss affects quality of life in patients undergoing both lumbar fusion and total hip arthroplasty

Aims

Overall sagittal flexion is restricted in patients who have undergone both lumbar fusion and total hip arthroplasty (THA). However, it is not evident to what extent this movement is restricted in these patients and how this influences quality of life (QoL). The purpose of this study was to determine the extent to which hip-lumbar mobility is decreased in these patients, and how this affects their QoL score.

Methods

Patients who underwent primary THA at our hospital between January 2010 and March 2021 were considered (n = 976). Among them, 44 patients who underwent lumbar fusion were included as cases, and 44 THA patients without lumbar disease matched by age, sex, and BMI as Control T. Among those who underwent lumbar fusion, 44 patients without hip abnormalities matched by age, sex, and BMI to the cases were considered as Control F. Outcome and spinopelvic parameters were measured radiologically in extension and flexed-seated positions. Hip, lumbar, and hip-lumbar mobility were calculated as parameter changes between positions.

Results

There were 20 male and 112 female patients in the case and control groups, with a mean age of 77 years (5 to 94) and a mean BMI of 24 kg/m2 (15 to 34). QoL score and hip-lumbar mobility were reduced in cases compared to Control T and F, and were further reduced as the number of fused levels increased. Hip-lumbar mobility was associated with reduction in activity-related QoL, mostly for those activities requiring sagittal flexion.

Conclusion

This study confirmed that hip-lumbar mobility is a factor that influences activity, most of all those requiring overall sagittal flexion. Clinicians should focus on hip-lumbar mobility and counteract disability by suggesting appropriate assistive devices.

The change in lumbar lordosis from the standing to the lateral position: implications for lateral interbody fusion

PURPOSE

The purpose of this cross-sectional, observational study was to establish the relationship between standing lumbar lordosis (LL) and lateral decubitus LL.

METHODS

Forty-nine subjects, 24 male and 25 female, were prospectively enrolled. Patients with pre-existing spinopelvic pathology were excluded. Standing, relaxed-seated, and lateral decubitus lateral radiographs were obtained. Radiographic variables measured included LL and lordosis change at each lumbar level (e.g. L1-L2). The change in LL when going from a standing to a lateral decubitus position (ΔLL), the correlation between standing and sitting LL compared to lateral decubitus LL, and the correlation between ΔLL and standing pelvic incidence (PI), pelvic tilt (PT), PI-LL mismatch, pelvic femoral angle (PFA), and sacral slope (SS) were calculated.

RESULTS

Subjects had an average age of 25.7 ± 2.3 years and body mass index of 24.1 ± 3.0 kg/m2. On average, 11.9°±8.2° (range - 7° to 29°) of LL was lost when transitioning from a standing to the lateral decubitus position. Lateral decubitus LL had a higher correlation with standing LL (R = 0.725, p < 0.001) than with relaxed-seated LL (R = 0.434, p < 0.001). Standing PT and PI-LL mismatch had moderately negative correlations with ΔLL (R=-0.58 and R=-0.59, respectively, both p < 0.05). Standing PI and standing PFA had a low negative correlation with ΔLL (R=-0.31 and R=-0.44, respectively, both p < 0.05) Standing SS and LL had no correlation with ΔLL.

CONCLUSIONS

Standing LL was strongly correlated to lateral decubitus LL, although subjects lost an average of 11.9° from the standing to the lateral decubitus position. This has important implications for fusion in the lateral position.

Spinopelvic Motion Evaluation in Patients Undergoing Total Hip Arthroplasty and Patient-Specific Target for Acetabular Cup Placement

Background/Objectives: Instability is a major reason for revision after total hip arthroplasty (THA), and acetabular cup placement in the "traditional" safe zone does not protect against dislocations. Spinopelvic mobility may play a role in impingement and dislocation after THA. Personalized acetabular cup placement that incorporates spinopelvic mobility is currently lacking in the literature. Methods: The spinopelvic motion of 116 patients was evaluated during preoperative planning. All patients underwent radiological assessments with an anteroposterior pelvis radiograph in the standing and supine positions and a lateral view of the lumbar spine and pelvis in the standing and sitting positions. The pelvic incidence, pelvic tilt, sacral slope, standing anterior pelvic plane tilt, sitting anterior pelvic plane tilt, and lumbar lordosis angle were measured, and the degree of pelvic motion from standing to sitting was calculated. The development of the patient-specific target for the acetabular cup was based on the mean mobility of the whole group and the specific posture of each patient. Results: The average pelvic incidence was 51.0 ± 13.1 degrees, the sacral slope was 35.0 ± 10.3 degrees, the pelvic tilt was 16.0 ± 13.3 degrees, the standing anterior pelvic plane tilt was 3.4 ± 12 degrees backward, and the degree of lumbar lordosis was 39.5 ± 11.3 degrees. The mean spinopelvic mobility was 27.3 ± 13.4 degrees. The measurements had good to excellent interobserver and intraobserver reliability. On the basis of these measurements, we developed a novel algorithm for a patient-specific target for acetabular cup placement. Conclusions: the evaluation of spinopelvic mobility has good to excellent interobserver and intraobserver reliability and can be used for personalized acetabular cup placement.

Patient-Specific Acetabular Safe Zones in Total Hip Arthroplasty: External Validation of a Quantitative Approach to Preoperatively Templating Spinopelvic Parameters

Background

Spinopelvic mechanics are critical in total hip arthroplasty; however, there is no established consensus for adjusting acetabular component positioning based on spinopelvic parameters. This study aimed to (1) validate a recently developed Patient-Specific acetabular safe-zone calculator that factors in spinopelvic parameters and (2) compare differences with hip-spine classification targets.

Methods

A total of 3750 patients underwent primary total hip arthroplasty across 3 academic referral centers, with 33 (0.88%) requiring revision for instability. Spinopelvic parameters were measured before initial total hip arthroplasty, and acetabular component position was measured following the index and revision procedures. Most operations employed either computer navigation or robotic assistance (94%). Surgical approaches included both anterior and posterior techniques. Utilizing our recently developed patient-specific safe-zone calculator, theoretical intraoperative positions were calculated and compared to true component positions before and after revision.

Results

Among 33 patients who underwent revision, none dislocated at an average follow-up of 5.1 years. In the external validation cohort, the average absolute differences between the patient-specific safe-zone and the median hip-spine classification recommendation were 3.8° ± 2.1° inclination and 5.0° ± 3.2° version. For the pooled cohort, the absolute differences between the patient-specific safe-zone targets and the prerevision component positions were 7.9° ± 5.1° inclination and 11.4° ± 6.9° version. After revision, the mean absolute differences decreased to 3.6° ± 3.1° inclination and 5.8° ± 3.5° version (P < .001).

Conclusions

A patient-specific approach improved acetabular component positioning accuracy within 6° of version and 4° of inclination of stable, revised hips. Patient-specific safe zones provide quantitative targets for nuanced spinopelvic preoperative planning that may mitigate risk of instability and may indicate use of assisted technologies.

Decreased "Polar Axis Angle" is Associated With Instability After Total Hip Arthroplasty: A New Method to Assess Functional Component Position on Lateral-Seated Radiographs

BACKGROUND

Research on hip instability has focused on establishing "safe" ranges of combined component position in supine posture or functional placement of the acetabular component based on the hip-spine relationship. A new angle, the polar axis angle (PAA), of the total hip arthroplasty (THA) components describes the concentricity of both components and can be evaluated in functional positions that confer a greater risk of instability (ie, sitting). The goal of this study was to compare the PAA in functional positions between patients who experienced a postoperative dislocation and a matched control group who did not have a dislocation.

METHODS

An institutional database was searched for patients experiencing a dislocation after primary THA. Patients who had postoperative full-length standing and lateral-seatedradiographs were included in the dislocator group. A control group of nondislocator patients was matched 2:1 by age, body mass index, sex, and hip-spine classification. Radiographic measurements of the neck angle, acetabular ante-inclination, and PAA were performed by 2 separate blinded, trained reviewers.

RESULTS

The lateral-seated neck angle and lateral-seated PAA measurements were significantly lower in the dislocator groups (n = 37) than the control group (n = 74) (23 versus 33 degrees, P < .001; 74 versus 83 degrees, P = .012, respectively). Significant differences were also observed in changes in the polar axes and neck angles between standing and seated positions (P < .001 and P < .001, respectively). When comparing patients who have mobile spines versus stiff spines within the dislocator group, there were no differences in the acetabular, neck, or PAAs. The effect of neck angle on the PAA showed a linear trend across cohorts.

CONCLUSIONS

Patients who experience postoperative instability have a significantly lower PAA on lateral-seated radiographs when matched for age, sex, body mass index, and hip-spine classification. In addition, the lower seated PAA is driven more strongly by decreased functional femoral anteversion, which emphasizes the role of functional femoral version on stability in THA.

Large cohort study on prevention strategies for dislocation in total hip arthroplasty

BACKGROUND

Dislocation is a major complication of total hip arthroplasty (THA). This study aimed to assess the dislocation rate after THA using the combined strategy of using CT-based navigation, large diameter heads, and posterior soft tissue repair in a large cohort.

METHODS

We included 1410 patients who had undergone primary cementless THA using the CT-based navigation system. The posterior approach was used by a single surgeon for all patients. The participants included 143 (10.1 %) men and 1267 (89.9 %) women, with a mean age of 65 years. The mean body mass index was 24 kg/m2. Additionally, the incidence rate of postoperative dislocation per year was calculated. The dislocation onset was classified as early when the dislocation occurred within 2 years of the primary THA and late when it occurred more than 2 years after the primary THA. Recurrence and revision rates in patients with dislocations were investigated.

RESULTS

The postoperative dislocation rate was 0.56 % (8 patients). The mean time to dislocation onset was 11.2 (0.5-20.0) months postoperatively. All postoperative dislocations occurred in the early phase whereas none in the late phase, showing a significant difference (p < 0.01). Six (0.43 %) patients experienced recurrent dislocations or required revision.

CONCLUSIONS

THA using the combined strategy resulted in low dislocation rates, especially without late dislocation.

A multicentre prospective assessment of the utility of robotic assisted total hip arthroplasty with virtual range of motion on intraoperative implant positioning

BACKGROUND

The growing adoption of robotic-assistance during total hip arthroplasty (THA) has provided novel means through which a patient's anatomy and dynamic spinopelvic relationship can be incorporated into surgical planning. However, the impact of enhanced technologies on intraoperative decision-making and changes to component positioning has not yet been described.

METHODS

A multicentre, prospective study included 105 patients (52% women) patients who underwent robotic-assisted THA with the integration of software that incorporates a patient's pelvic tilt (PT) and virtual range-of-motion (VROM) for impingement modeling. The primary outcome of the study was the percentage of patients who underwent changes to the preoperative plan for cup position after incorporating the data from the software.

RESULTS

Utilising the intraoperative VROM information, the preoperative plan for cup position was changed from the default (40° inclination and 20° anteversion) in 82/105 (78%) cases. When stratifying by spinopelvic mobility, 64% were considered normal (change ⩾ 10° and ⩽30°), 27% were stiff (change < 10°), and 9% were hypermobile (change > 30°). For all cohorts, the majority of cases (78%) deviated from the 40° inclination and 20° version target. When evaluating the proportion of cases within the Lewinnek and Callanan safe zones based on spinopelvic mobility, 19% of cases within the normal group were planned outside of both zones compared to 39% of stiff cases and 10% of hypermobile cases.

CONCLUSIONS

Utilising the latest version of robotic-assisted THA software, the preoperative plan for cup position was changed in the vast majority (78%) of patients, causing substantial deviations from traditional, generic cup targets.

Can we identify abnormal pelvic tilt using pre-THA anteroposterior pelvic radiographs?

BACKGROUND

Patients with increased pelvic tilt (PT) are at risk for instability following total hip arthroplasty (THA). Identification of increased PT using anteroposterior (AP) pelvic radiographs could avoid additional spinopelvic radiographs. This study aimed to (1) describe which AP pelvic parameters most accurately estimate sagittal PT, and (2) determine thresholds for these parameters that can identify patients with increased PT.

METHODS

This was a retrospective, consecutive, cohort study in a tertiary referral hospital on 225 patients (age: 66 ± 12 years-old; 52% female) listed for THA. Patients underwent pre-operative standing AP pelvic radiographs to measure distance- and angular- based parameters from several anatomical landmarks. Sagittal PT was measured on a standing lateral spinopelvic radiograph and considered high when ≥ 20°.

RESULTS

No AP pelvic parameters correlated strongly with sagittal PT. Ratio between horizontal and vertical diameter of the pelvic foramen (C/D ratio) (rho - 0.341; p < 0.001); and vertical distance between trans-SIJ and trans-ASIS line (SITA) (rho 0.307; p < 0.001) correlated moderately with sagittal PT. Sacro-femoral-pubic (SFP) angle < 60° had highest sensitivity (85%), but lowest specificity (52%) to differentiate between patients with and without increased PT. If SITA > 62 mm, C/D ratio < 0.5 and SFP < 60°, specificity increased (88%), but sensitivity was low (49%).

CONCLUSION

In the absence of computerized models, AP pelvic parameters cannot accurately predict sagittal PT. However, an SFP < 60° should alert a hip surgeon that a patient may have an increased PT, and would benefit from additional lateral spinopelvic imaging prior to THA.

LEVEL OF EVIDENCE

Level II, diagnostic study.

Reliability of the transverse acetabular ligament as a landmark for functional cup anteversion in total hip arthroplasty

BACKGROUND

The transverse acetabular ligament (TAL) can be a useful and reproducible landmark in the orientation of the acetabular cup in total hip arthroplasty (THA). Its role in guiding cup orientation when aiming to implant in a functional anteversion orientation is unclear. The aim of this study was to assess the relationship between the TAL and the planned acetabular cup anteversion when implanted in a function orientation.

MATERIAL AND METHODS

In a retrospective study the anteversion of the TAL in the contralateral un-replaced hip was measured in CT scans of patients undergoing THA and compared to the functional cup anteversion using the patient-specific spinopelvic parameters. Comparative measurements of the native acetabular version were made from the superior rim to the inferior rim and at 10 mm intervals between the 2, all in reference to the anterior pelvic plane.

RESULTS

96 hips were measured. The mean TAL anteversion angle was 17.2° ± 4.5°. The mean planned acetabular cup anteversion angle was 26.3° ± 4.7°. Pearson's correlation coefficient of this measurement with the TAL was -0.03 (p = 0.769). There was a significant difference between the planned acetabular cup anteversion and the measurement of the TAL (p < 0.0001).

CONCLUSIONS

If cups are implanted parallel to the TAL, almost 80% will be >5° different to targeted functional cup version. It should be aimed to implant cups with more anteversion than the TAL indicates.

How Do Spinopelvic Characteristics Change Post-Total Hip Arthroplasty? A Longitudinal Assessment Raising Awareness of the Postoperative Period

BACKGROUND

Spinopelvic characteristics, including sacral slope (SS), are commonly evaluated in different positions pre-total hip arthroplasty (THA). This study aimed to: 1) investigate the change in spinopelvic parameters at 7 days (early) and 1-year post-THA; and 2) identify patient characteristics associated with a change in SS of more than 7° post-THA.

METHODS

We prospectively studied 250 patients who underwent unilateral THA [132 women, age 66 years (range, 32 to 88)] and underwent biplanar images preoperatively and at 7 days and 1-year post-THA. Parameters measured included pelvic incidence, standing lumbar lordosis, SS, and proximal femoral angle (PFA). A SS change ≥ 7° was considered the threshold as it would result in more than a 5° change in cup orientation.

RESULTS

Early post-THA SSstanding remained within ± 6º from preoperative measurements in 75% of patients, reduced by ≥ 7° in 9%, and increased by ≥ 7° in 16%. Those that showed a reduction in SS had the lowest PFA and the highest SS pre-THA (P = .028, .107, and < 0.001, respectively). From 7 days until the 1-year mark, pelvic tilt increased, SS reduced (mean: -4º, range: -29 to 17º, P < .001), and patients stood with greater hip extension ΔPFAstanding (mean 7°, range: -34 to 37°, P < .001). At 1 year, SSseated had remained within ± 6º, relative to the pre-THA value, in 49% of patients.

CONCLUSIONS

Standing spinopelvic characteristics, especially SSstanding, remain within ±6° in three-quarters of patients both early- and at 1-year post-THA. In the remaining cases, pelvic tilt changes significantly. In 9% of cases, SS reduces ≥ 7° early THA, probably due to the alleviation of fixed-flexion contractures. The SSseated changes by ≥ ± 7° in almost 50% of cases in this study, and its clinical value as a preoperative planning tool should be questioned.

LEVEL OF EVIDENCE

Level II, diagnostic study.

Patients with Hip Osteoarthritis Have a Higher Rate of Spinal Reoperation Following Lumbar Spinal Fusion

BACKGROUND

Lumbar spinal pathology is known to affect outcomes following total hip arthroplasty (THA). However, the effect of hip osteoarthritis (OA) on outcomes following lumbar fusion has not been well studied. The purpose of this study was to determine the association between hip OA and spinal reoperation following lumbar spinal fusion.

METHODS

The 5% Medicare Part B claims database was queried for all patients who underwent primary elective lumbar fusion from 2005 to 2019. Patients were divided into 2 groups: those who underwent elective THA within 1 year after primary lumbar fusion, indicating that they had severe hip OA at the time of lumbar fusion, and those who underwent lumbar fusion with no diagnosed hip OA and no THA during the study period. Exclusion criteria included THA as a result of trauma, revision THA or primary THA in the 5-year period before primary lumbar fusion, <65 years of age, and no enrollment in the database for 5 years before and 1 year after primary lumbar fusion. The primary outcome was spinal reoperation within 1, 3, and 5 years. Multivariable Cox regression was performed with age, sex, diabetes, heart disease, obesity, smoking status, osteoporosis, number of levels fused, use of posterior instrumentation, use of an interbody device, use of bone graft, and surgical approach as covariates.

RESULTS

Overall, 1,123 patients (63.4% female; 91.3% White; mean age, 76.8 ± 4.1 years) were included in the hip OA group and 8,893 patients (56.2% female; 91.3% White; mean age, 74.8 ± 4.9 years) were included in the control group. After multivariable analysis, patients with severe hip OA had significantly greater rates of revision surgery at 3 years (odds ratio [OR], 1.61; p < 0.001) and 5 years (OR, 1.87; p < 0.001) after the index lumbar fusion.

CONCLUSIONS

Patients with severe hip OA at the time of primary lumbar fusion had a significantly increased risk of spinal reoperation at 3 and 5 years postoperatively. These data provide further evidence to support performing THA prior to lumbar fusion in the unsettled debate regarding which surgery should be prioritized for patients with simultaneous degenerative diseases of the hip and lumbar spine.

LEVEL OF EVIDENCE

Prognostic Level III . See Instructions for Authors for a complete description of levels of evidence.

Hip-spine parameters change with increasing age

Aims

Spinopelvic pathology increases the risk for instability following total hip arthroplasty (THA), yet few studies have evaluated how pathology varies with age or sex. The aims of this study were: 1) to report differences in spinopelvic parameters with advancing age and between the sexes; and 2) to determine variation in the prevalence of THA instability risk factors with advancing age.

Methods

A multicentre database with preoperative imaging for 15,830 THA patients was reviewed. Spinopelvic parameter measurements were made by experienced engineers, including anterior pelvic plane tilt (APPT), spinopelvic tilt (SPT), sacral slope (SS), lumbar lordosis (LL), and pelvic incidence (PI). Lumbar flexion (LF), sagittal spinal deformity, and hip user index (HUI) were calculated using parameter measurements.

Results

With advancing age, patients demonstrate increased posterior APPT, decreased standing LL, decreased LF, higher pelvic incidence minus lumbar lordosis (PI-LL) mismatch, higher prevalence of abnormal spinopelvic mobility, and higher HUI percentage. With each decade, APPT progressed posteriorly 2.1°, LF declined 6.0°, PI-LL mismatch increased 2.9°, and spinopelvic mobility increased 3.8°. Significant differences were found between the sexes for APPT, SPT, SS, LL, and LF, but were not felt to be clinically relevant.

Conclusion

With advancing age, spinopelvic biomechanics demonstrate decreased spinal mobility and increased pelvic/hip mobility. Surgeons should consider the higher prevalence of instability risk factors in elderly patients and anticipate changes evolving in spinopelvic biomechanics for young patients.

Spinopelvic interactions in total hip arthroplasty: 295 patients followed for a minimum follow-up of 10 years

BACKGROUND

Concurrent spinal pathology is frequent in patients undergoing total hip arthroplasty (THA). In this study we examined whether spinopelvic interactions affect THA outcomes at a minimum follow-up of 10 years.

PATIENTS AND METHODS

295 patients with a mean age of 63.3 (range 56‒80) years receiving a THA between 2006 and 2009 were assessed. Of these, 195 had mild lumbar disc degeneration and 100 had advanced lumbar spondylosis. We analysed the changes in the Harris Hip Score (HHS) and the survival rate for postoperative low back pain (LBP) and dislocation. Changes in acetabular component position, sacro-femoral-pubic (SFP) and pelvic obliquity (PO) angles were assessed with radiological images.

RESULTS

The mean HHS was lower in female patients (p = 0.009), patients >65 years of age (p < 0.001) and those with advanced lumbar spondylosis (p = 0.002). 52 (71.2%) of the patients reporting preoperative LBP experienced improvement after THA while 47 (21.1%) of those without preoperative LBP postoperatively reported new onset LBP. Female patients (p = 0.025; hazard ratio [HR]: 1.831; 95% CI, 1.081-3.101) and those with preoperative LBP (p = 0.007; HR 2.068; 95% CI, 1.221-3.504) were at a higher risk of developing postoperative LBP at 10 years. 4 out of 9 THA dislocations were late and had shown decreasing SFP angle values over time. Acetabular component inclination and anteversion angles increased over time, whereas the SFP angle was associated with sex and age and the PO angle with age and the severity of any preoperative lumbar degeneration.

CONCLUSIONS

Concurrent spinal pathology influences THA outcomes at a minimum follow-up of 10 years. Sex, age, and associated lumbar degeneration can affect clinical and radiological changes over time. A decrease in SFP angle values over time was found in patients sustaining late dislocation.

The Relationship of Cup Inclination and Anteversion in the Coronal Plane with Ante-Inclination in the Sagittal Plane: Exposing the Fallacy of Cup Safe Zones

Background

This study aimed to establish an equation for calculating cup ante-inclination (AI) from radiographic cup inclination and anteversion, to validate this equation in a total hip arthroplasty (THA) cohort, and to test whether achieving previously described radiographic cup inclination and anteversion targets would also satisfy sagittal cup AI targets.

Methods

A mathematical equation linking cup AI, radiographic inclination (RI), and anteversion (RA) was determined: tan(AI) = tan(RA)/cos(RI). Supine and standing anteroposterior and lateral radiographs of 440 consecutive THAs were assessed to measure cup RI and RA and spinopelvic parameters, including cup AI, using a validated software tool. Whether orientation within previously defined RI and RA targets was associated with achieving the AI target and satisfying the sagittal component orientation (combined sagittal index, 205° to 245°) was tested.

Results

The cups in the THA cohort had a measured mean inclination (and standard deviation) of 43° ± 7°, anteversion of 26° ± 9°, and AI of 34° ± 10°. The calculated cup AI was 34° ± 12°. A strong correlation existed between measured and calculated AI (r = 0.75; p < 0.001), with a mean error of 0° ± 8°. The inclination and anteversion targets were both satisfied in 194 (44.1%) to 330 (75.0%) of the cases, depending on the safe zone targets that were used, and 311 cases (70.7%) satisfied the AI target. Only 125 (28.4%) to 233 (53.0%) of the cases satisfied the AI target as well as the inclination and anteversion targets. Satisfying inclination and anteversion targets was not associated with increased chances of satisfying the AI target.

Conclusions

Achieving optimal cup inclination and anteversion does not ensure optimal orientation in the sagittal plane. The equation and nomograms provided can be used to determine and visualize how the 2 planes used for evaluating the cup orientation and the pertinent angles relate, potentially aiding in preoperative planning.

Dislocation of primary total hip arthroplasty: Analysis of risk factors and preventive options

Total hip arthroplasty (THA) is one of the most successful elective operations in orthopedic surgery for improving pain and functional disability in patients with end-stage joint disease. However, dislocation continues to be a troublesome complication after THA, as it is a leading cause of revision and is associated with substantial social, health, and economic costs. It is a relatively rare, usually early occurrence that depends on both the patients' characteristics and the surgical aspects. The most recent and important finding is the special attention to be given preoperatively to spinopelvic mobility, which is closely related to the incidence of dislocation. Consequently, clinical and radiographic assessment of the lumbar spine is mandatory to identify an altered pelvic tilt that could suggest a different positioning of the cup. Lumbar spinal fusion is currently considered a risk factor for dislocation and revision regardless of whether it is performed prior to or after THA. Surgical options for its treatment and prevention include the use of prostheses with large diameter of femoral head size, dual mobility constructs, constrained liners, and modular neck stems.

Robotic-assisted Total Hip Arthroplasty and Spinopelvic Parameters: A Review

Total hip arthroplasty (THA) is an effective treatment for osteoarthritis, and the popularity of the direct anterior approach has increased due to more rapid recovery and increased stability. Instability, commonly caused by component malposition, remains a significant concern. The dynamic relationship between the pelvis and lumbar spine, deemed spinopelvic motion, is considered an important factor in stability. Various parameters are used in evaluating spinopelvic motion. Understanding spinopelvic motion is critical, and executing a precise plan for positioning the implant can be difficult with manual instrumentation. Robotic and/or navigation systems have been developed in the effort to enhance THA outcomes and for implementing spinopelvic parameters. These systems can be classified into three categories: X-ray/fluoroscopy-based, imageless, and computed tomography (CT)-based. Each system has advantages and limitations. When using CT-based systems, preoperative CT scans are used to assist with preoperative planning and intraoperative execution, providing feedback on implant position and restoration of hip biomechanics within a functional safe zone developed according to each patient's specific spinopelvic parameters. Several studies have demonstrated the accuracy and reproducibility of robotic systems with regard to implant positioning and leg length discrepancy. Some studies have reported better radiographic and clinical outcomes with use of robotic-assisted THA. However, clinical outcomes comparable to those for manual THA have also been reported. Robotic systems offer advantages in terms of accuracy, precision, and potentially reduced rates of dislocation. Additional research, including conduct of randomized controlled trials, will be required in order to evaluate the long-term outcomes and cost-effectiveness of robotic-assisted THA.

Challenges in Total Hip Arthroplasty with Prior Spinal Arthrodesis: A Comprehensive Review of Biomechanics, Complications, and Surgical Strategies

Total hip arthroplasty (THA) has revolutionized patients' lives with hip osteoarthritis. However, the increasing prevalence of THA in individuals with prior lumbar arthrodesis (LA) poses unique challenges. This review delves into the biomechanical alterations, complications, and surgical strategies specific to this patient subset, highlighting the need for tailored preoperative assessments and planning. Due to altered pelvic and spinal biomechanics, patients with LA undergoing THA face a higher risk of dislocation and revision. The complex interplay between spinal and hip biomechanics underscores the need for meticulous preoperative planning. Comprehensive clinical examination and radiographic evaluation are vital for understanding patient-specific challenges. Various radiographic techniques, including computed tomography (CT)/X-ray matching and standing/seated studies, provide insights into postural changes affecting pelvic and spinal alignment. Complications following THA in patients with LA highlight the necessity for personalized surgical strategies. Careful consideration of implant selection, the surgical approach, and component positioning are essential to prevent complications. In summary, THA in patients with prior LA demands individualized preoperative assessments and planning. This approach is crucial to optimize outcomes and mitigate the heightened risks of complications, underlining the importance of tailored surgical strategies.

The Impact of Pelvic Incidence on Spinopelvic and Hip Alignment and Mobility in Asymptomatic Subjects

BACKGROUND

The influence of pelvic incidence (PI) on spinopelvic and hip alignment and mobility has not been well investigated. The aim of this study was to evaluate the influence of PI on spinopelvic and hip alignment and mobility, including the pelvic-femoral angle (PFA) and motion (ΔPFA), in functional positions in a cohort of asymptomatic volunteers.

METHODS

This was a single-center, prospective, cross-sectional study. We included 136 healthy volunteers (69% female; mean age, 38 ± 11 years; mean body mass index, 22 ± 3 kg/m2) divided into 3 subgroups on the basis of their PI: PI < 45° (low PI), 45° ≤ PI ≤ 60° (medium PI), and PI > 60° (high PI). We made full-body lateral radiographs in free-standing, standing with extension, relaxed-seated, and flexed-seated positions. We measured the sacral slope (SS), lumbar lordosis (LL), and PFA. We calculated lumbar (∆LL), pelvic (∆SS), and hip (∆PFA) mobilities as the change between the standing (i.e., standing with or without extension) and sitting (i.e., relaxed-seated or flexed-seated) positions.

RESULTS

There were significant differences between some of the 3 subgroups with respect to the LL, SS, and PFA in each of the 4 positions. There were no significant differences in ΔLL, ΔSS, or ΔPFA between the 3 groups when moving from a standing to a sitting position. PI had an inverse linear correlation with PFAextension (R = -0.48; p < 0.0001), PFAstanding (R = -0.53; p < 0.0001), PFArelaxed-seated (R = -0.37; p < 0.0001), and PFAflexed-seated (R = -0.47; p < 0.0001). However, PI was not correlated with ΔPFAstanding/relaxed-seated (R = -0.062; p = 0.48) or ΔPFAextension/flexed-seated (R = -0.12; p = 0.18). Similarly, PI was not significantly correlated with ΔLL or ΔSS in either pair of positions.

CONCLUSIONS

This study confirmed that spinopelvic and hip parameters in functional positions were affected by PI, whereas lumbar, pelvic, and hip mobilities did not depend on PI. These findings suggest that hip surgeons should consider the PI of the patient to determine the patient's specific functional safe zones before and after total hip arthroplasty.

LEVEL OF EVIDENCE

Prognostic Level II. See Instructions for Authors for a complete description of levels of evidence.

Mobility of the lumbo-pelvic-hip complex (spinopelvic mobility) and sagittal spinal alignment - implications for surgeons performing hip arthroplasty

INTRODUCTION

The optimal positioning of the hip prosthesis components is influenced by the mobility and balance of the spine. The present study classifies patients with pathology of the spino-pelvic-hip complex, showing possible methods of preventing hip dislocations after arthroplasty.

HYPOTHESIS

Hip-Spine Classification helps arthroplasty surgeons to implant components in more patient-specific position.

MATERIALS AND METHODS

The group of 100 patients treated with total hip arthroplasty. Antero-posterior (AP) X-rays of the pelvis in a standing position, lateral spine (standing and sitting) and AP of the pelvis (supine after the procedure) were analyzed. We analyzed a change in sacral tilt value when changing from standing to sitting (∆SS), Pelvic Incidence (PI), Lumbar Lordosis (LL) Mismatch, sagittal lumbar pelvic balance (standing position). Patients were classified according to the Hip-Spine Classification. Postoperatively, the inclination and anteversion of the implanted acetabular component were measured.

RESULTS

In our study 1 A was diagnosed in 61% of all cases, 1B in 18%, 2 A in 16%, 2B in 5%. 50 out of 61 (82%) in group 1 A were placed within the Levinnek "safe zone". In 1B, 2 A, 2B, the position of the acetabular component was influenced by both the spinopelvic mobility and sagittal spinal balance. The mean inclination was 43.35° and the anteversion was 17.4°.

CONCLUSIONS

Categorizing patients according to Hip-Spine Classification one can identify possible consequences the patients at risk. Pathology of the spino-pelvic-hipcomplex can lead to destabilization or dislocation of hip after surgery even though implanted according to Lewinnek's indications. Our findings suggest that Lewinnek safe zone should be abandoned in favor of the concept of functional safe zones.

What patient parameters influence lumbar stiffness in patients with hip pathology?

Lumbar stiffness leads to greater hip dependence to achieve sagittal motion and increases instability after total hip arthroplasty (THA). We aimed to determine parameters that influence lumbar stiffness among patients with hip pathology. We hypothesized that modifiable (degenerative changes, spinal canal stenosis, facet orientation) and nonmodifiable factors (muscle condition) would be associated with lumbar spine stiffness. In this retrospective case-cohort study from a tertiary referral center, consecutive patients presenting at a hip specialist clinic underwent standing and deep-seated radiographic assessment to measure lumbar lordosis (∆LL) (stiffness: ∆LL < 20°), hip flexion (∆PFA: pelvic femoral angle), and degree of degenerative-disc-disease (DDD) (facet osteoarthritis, disc height, endplate proliferative changes). Of these, 65 patients were selected with previous lumbar spine magnetic resonance imaging, allowing to determine lumbar facet orientation, spinal canal stenosis (Schizas classification), and flexor- and extensor-muscle atrophy (Goutallier classification). Mean ∆LL was 45° (range: 11°-72°) and four patients (6%) exhibited spine stiffness. Patients with multilevel DDD (n = 22) had less ∆LL than those with no/single level (n = 43) DDD (34° [range: 11°-53°] vs. 51° [21°-72°]; p < 0.001). Number of DDD levels correlated strongly with ∆LL (ρ = -0.642; p < 0.001). Spinal stiffness was only seen in patients with ≥4 DDD levels. There was no correlation between ∆LL and facet orientation (p > 0.05). ∆LL correlated strongly with extensor atrophy at L3-L4 (ρ = -0.473), L4-L5 (ρ = -0.520), and L5-S1 (ρ = -0.473) and poorly with flexors at L4-L5 (ρ = -0.134) and L5-S1 (ρ = -0.227). Lumbar stiffness is dependent on modifiable (muscle atrophy) and nonmodifiable (extend of DDD) factors. This can guide nonoperative management of hip pathology, emphasizing the relevance of core muscle rehabilitation to improve posture and stiffness. Identification ≥4 DDD levels should alert surgeons of increased THA instability risk. Level of evidence: level IV, cohort series.

Instability in Patients With Lumbar Spine Disease Undergoing Posterior Approach and Lateral Approach Primary Total Hip Arthroplasty

INTRODUCTION

Dislocation rates in patients who have fixed spinopelvic motion have been reported up to 20%. Few studies have directly compared dislocation rates in patients who have spine pathology undergoing total hip arthroplasty (THA) through different surgical approaches. This study compared postoperative dislocation rates in patients who had lumbar spine disease and underwent primary THA using a posterior or direct lateral approach.

METHODS

Between 2011 and 2017, consecutive cohorts of primary THAs were retrospectively reviewed. One surgeon routinely used a posterior approach, while the other used a direct lateral approach. Chart and radiographic review were conducted to identify patients who had lumbar spine disease. Dislocations among cohorts with and without lumbar spine disease were compared by posterior and direct lateral approaches.

RESULTS

The overall dislocation rate was 1.3% (15/1,198). The top four predictors of dislocation were presence of lumbar spine disease (odds ratio [OR] 5.0; P = 0.014), posterior surgical approach (OR, 6.5; P = 0.074), cases performed for fracture (OR, 4.4; P = 0.035), and women (OR, 4.6; P = 0.050). Dislocation rates among direct lateral approach patients who had lumbar spine pathology were significantly lower than posterior approach patients who had lumbar spine pathology (0.0% versus 3.6%; P = 0.011).

DISCUSSION

Although dislocation rates were low in both groups, study results suggest that a direct lateral approach for primary THA may reduce postoperative dislocations for patients who have limited spinopelvic motion due to lumbar spine pathology. Furthermore, surgeons using the posterior approach might consider optimizing the femoral head to acetabular cup ratio in patients who have lumbar spine disease.

Sagittal balance in sitting and standing positions: A systematic review of radiographic measures

Background

Sagittal imbalance can be caused by various etiologies and is among the most important indicators of spinal deformity. Sagittal balance can be restored through surgical intervention based on several radiographic measures. The purpose of this study is to review the normal parameters in the sitting position, which are not well understood and could have significant implications for non-ambulatory patients.

Methods

A systematic review was performed adhering to PRISMA Guidelines. Using R-software, the weighted means and 95% confidence intervals of the radiographic findings were calculated using a random effect model and significance testing using unpaired t-tests.

Results

10 articles with a total of 1066 subjects reported radiographic measures of subjects with no spinal deformity in the sitting and standing position. In the healthy individual, standing sagittal vertical axis -16.8°was significantly less than sitting 28.4° (p < 0.0001), while standing lumbar lordosis 43.3°is significantly greater than sitting 21.3° (p < 0.0001). Thoracic kyphosis was not significantly different between the two groups (p = 0.368). Standing sacral slope 34.3° was significantly greater than sitting 19.5° (p < 0.0001) and standing pelvic tilt 14.0° was significantly less than sitting 33.9° (p < 0.0001).

Conclusions

There are key differences between standing and sitting postures, which could lead to undue stress on surgical implants and poor outcomes, especially for non-ambulatory populations. There is a need for more studies reporting sitting and standing radiographic measures in different postures and spinal conditions.

Hip-spine relationship: clinical evidence and biomechanical issues

The hip-spine relationship is a critical consideration in total hip arthroplasty (THA) procedures. While THA is generally successful in patient, complications such as instability and dislocation can arise. These issues are significantly influenced by the alignment of implant components and the overall balance of the spine and pelvis, known as spinopelvic balance. Patients with alteration of those parameters, in particular rigid spines, often due to fusion surgery, face a higher risk of THA complications, with an emphasis on complications in instability, impingement and dislocation. For these reasons, over the years, computer modelling and simulation techniques have been developed to support clinicians in the different steps of surgery. The aim of the current review is to present current knowledge on hip-spine relationship to serve as a common platform of discussion among clinicians and engineers. The offered overview aims to update the reader on the main critical aspects of the issue, from both a theoretical and practical perspective, and to be a valuable introductory tool for those approaching this problem for the first time.

Spinal fusion and total hip arthroplasty: why timing is important

BACKGROUND

There is increasing debate among orthopaedic surgeons over the temporal relationship between lumbar spinal fusion (LSF) and total hip arthroplasty (THA) for patients with hip-spine syndrome. Few large studies have directly compared the results of patients who undergo LSF prior to THA (LSF-THA) to those who undergo LSF after THA (THA-LSF). The current study matched THA patients with a prior LSF to patients who underwent LSF after THA to assess: 90-day and 1-year (1) medical/surgical complications; and (2) revisions.

METHODS

We queried a national, all-payer database to identify all patients undergoing THA between 2010 and 2018 (n = 716,084). The LSF-THA patients and THA-LSF patients were then matched 1:1 on age, sex, Charleson Comorbidity Index, and obesity. Medical/surgical complications and revisions at 90 days and 1 year were recorded. Categorical and continuous variables were analysed utilising t-tests and chi-square, respectively.

RESULTS

LSF-THA patients experienced significantly more postoperative dislocations at 90 days and 1 year compared to THA-LSF patients (p = 0.048 and p < 0.001). There were a similar number of revisions performed for LSF-THA and THA-LSF patients at both 90 days and 1 year (p = 0.183 and p = 0.426). Furthermore, at 1 year, LSF-THA patients experienced more pneumonia (p = 0.005) and joint infection (p = 0.020).

CONCLUSIONS

Prior LSF has been demonstrated to increase the risk of postoperative dislocation in patients undergoing THA. The results of the present study demonstrate increased dislocations with LSF-THA compared to THA-LSF. For "hip spine syndrome" patients requiring both LSF and THA, it may be more beneficial to undergo THA prior to LSF. Arthroplasty surgeons may wish to collaborate with spinal surgeons to ensure optimal outcomes for this group of patients.

Excessive posterior pelvic tilt from preoperative supine to postoperative standing after total hip arthroplasty

Aims

Excessive posterior pelvic tilt (PT) may increase the risk of anterior instability after total hip arthroplasty (THA). The aim of this study was to investigate the changes in PT occurring from the preoperative supine to postoperative standing position following THA, and identify factors associated with significant changes in PT.

Methods

Supine PT was measured on preoperative CT scans and standing PT was measured on preoperative and one-year postoperative standing lateral radiographs in 933 patients who underwent primary THA. Negative values indicate posterior PT. Patients with > 13° of posterior PT from preoperative supine to postoperative standing (ΔPT ≤ -13°) radiographs, which corresponds to approximately a 10° increase in functional anteversion of the acetabular component, were compared with patients with less change (ΔPT > -13°). Logistic regression analysis was used to assess preoperative demographic and spinopelvic parameters predictive of PT changes of ≤ -13°. The area under receiver operating characteristic curve (AUC) determined the diagnostic accuracy of the predictive factors.

Results

PT changed from a mean of 3.8° (SD 6.0°)) preoperatively to -3.5° (SD 6.9°) postoperatively, a mean change of -7.4 (SD 4.5°; p < 0.001). A total of 95 patients (10.2%) had ≤ -13° change in PT from preoperative supine to postoperative standing. The strongest predictive preoperative factors of large changes in PT (≤ -13°) from preoperative supine to postoperative standing were a large posterior change in PT from supine to standing, increased supine PT, and decreased standing PT (p < 0.001). Flexed-seated PT (p = 0.006) and female sex (p = 0.045) were weaker significant predictive factors. When including all predictive factors, the accuracy of the AUC prediction was 84.9%, with 83.5% sensitivity and 71.2% specificity.

Conclusion

A total of 10% of patients had > 13° of posterior PT postoperatively compared with their supine pelvic position, resulting in an increased functional anteversion of > 10°. The strongest predictive factors of changes in postoperative PT were the preoperative supine-to-standing differences, the anterior supine PT, and the posterior standing PT. Surgeons who introduce the acetabular component with the patient supine using an anterior approach should be aware of the potentially large increase in functional anteversion occurring in these patients.

Superior outcomes of total hip arthroplasty without prior lumbar arthrodesis: a systematic review and meta-analysis

PURPOSE

The number of patients undergoing total hip arthroplasty (THA) surgery after previous lumbar arthrodesis (LA) is rising. Literature suggests that LA may significantly impact pelvic biomechanics and potentially compromise the success of prosthetic hip replacement. This study aims to evaluate complication rates, dislocation rates, and revision rates in patients with prior LA undergoing THA surgery compared to those undergoing THA surgery without prior LA.

METHODS

A systematic review and meta-analysis were conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A PICOS template was developed to ensure a structured approach. The search for relevant studies was performed across five databases, including Pubmed, Scopus, Embase, Medline, and Cochrane. The selected articles were evaluated based on the Levels of Evidence (LoE) criteria. The Coleman Methodology Score (mCMS) was employed to analyze the retrospective studies. This systematic review and meta-analysis were registered in the International Prospective Register of Systematic Reviews (PROSPERO). For the outcomes that allowed for a meta-analysis performed using R software, a p < 0.05 was considered statistically significant.

RESULTS

The final analysis included seventeen studies comprising a total of 3,139,164 cases of THA. Among these cases, 3,081,137 underwent THA surgery alone, while 58,027 patients underwent THA with a previous LA. The study investigated various factors, including dislocation rates, revision rates, and complication, as well as the surgical approach and type of implant used, for both the THA-only group and the group of patients who underwent THA with prior LA. The analysis revealed a statistically significant difference (p < 0.05) for all variables studied, favoring the group of patients who underwent THA alone without prior LA.

CONCLUSIONS

This systematic review and meta-analysis demonstrated a statistically significant superiority in all analyzed outcomes for patients who underwent THA-only without prior LA. Specifically, patients with isolated THA implants experienced significantly lower incidences of THA dislocation, wound complications, periprosthetic joint infection, revision, and mechanical complications.

LEVEL OF EVIDENCE

Level IV.

The Empty Ischial Fossa Sign: A Visual Representation of Relative Inadequate Anteversion in the Posteriorly Tilted Pelvis

Background

Instability is a known complication following total hip arthroplasty (THA) and is influenced by spinopelvic alignment. Radiographic markers have been investigated to optimize the acetabular cup position. This study evaluated if the empty ischial fossa (EIF) sign and the position of the trans-teardrop line were predictive of postoperative instability.

Methods

All patients who underwent THA from 2011 to 2018 at a single institution were retrospectively reviewed. Pelvic tilt was measured using a trans-teardrop line compared to the superior aspect of the pubic symphysis on standing anteroposterior pelvis radiographs. Postoperative dislocations were identified through chart review and radiographic review. The EIF sign was determined by the presence of uncovered bone below the posterior inferior edge of the acetabular component at the level of the native ischium and posterior wall on standing postoperative anteroposterior radiographs.

Results

One thousand seven hundred fifty patients (952 anterior approach and 798 posterior approach) were included. The EIF sign was present in 458 patients (26.2%) and associated with an increased dislocation rate (3.9% vs 0.9%, P < .0001). Patients with spondylosis/instrumented fusion, and positive EIF sign had a dislocation risk of 5.1% vs 1.3% (P = .001). A postoperative outlet pelvis was not significant for increased dislocation risk (odds ratio 2.16, P = .058). Patients with combined spondylosis/fusion, posterior approach, outlet pelvis, and EIF sign had a dislocation rate of 14.5%.

Conclusions

The EIF sign was an independent risk factor for postoperative instability and may represent failure to account for pelvic tilt. Avoidance of the EIF sign during cup positioning may help reduce dislocations following THA.

Insufficient stem antetorsion and lower cup abduction is a combined risk factor for posterior hip dislocation in patients undergoing THA for femoral neck fractures: a retrospective analysis

BACKGROUND

The role of acetabular and femoral component positions with respect to the risk of post-operative instability and dislocation remains debated. In this study, we aimed to identify potential risk factors for early dislocation following primary total hip arthroplasty (THA) for displaced intracapsular femoral neck fractures (FNF) using radiological measurements.

METHODS

We retrospectively analyzed data for patients who underwent cementless primary THA for FNF using a posterolateral approach between January 2018 and December 2021. Follow-up duration, age, sex, affected side, and mean time from THA to dislocation were recorded. Leg-length inequality, abductor lever arm, vertical and horizontal femoral offsets, vertical and horizontal hip centers of rotation, abduction, anteversion of the acetabulum and femoral prosthesis, and combined anteversion were measured.

RESULTS

The study sample included 17 men and 34 women, with 21 and 30 patients undergoing left- and right-hip operations, respectively. The mean patient age was 70.18 ± 7.64 years, and the mean follow-up duration was 27.73 ± 13.52 months. The mean time between THA and dislocation was 1.58 ± 0.79 months. Seven patients (13.73%) sustained posterior dislocation of the hip. The abduction angle (36.05 ± 6.82° vs. 45.68 ± 8.78°) (p = 0.008) and anteversion of the femoral prosthesis (8.26 ± 4.47° vs. 19.47 ± 9.01°) (p = 0.002) were significantly lower in the dislocation group than in the control group. There were no significant differences in other parameters.

CONCLUSIONS

Insufficient stem antetorsion combined with lower abduction angle of the acetabular component were associated with a high risk of dislocation, especially in patients with deep flexion or internal rotation of the flexed hip joint and knees, or in patients with a stiff spine or anterior pelvic tilt, impingement may then occur in the neck of the prosthesis and cup component, ultimately resulting in posterior dislocation. These findings could remind surgeons to avoid simultaneous occurrence of both in THA surgery. These results provide new insight into risk factors for hip dislocation in patients undergoing primary THA for FNF and may aid in reducing the risk of instability and dislocation.

LEVEL OF EVIDENCE

Prospective comparative study Level II.

Evaluation of changes in radiographic spinopelvic parameters after primary total hip arthroplasty and its relationship with short-term patient function

PURPOSE

Total hip arthroplasty (THA) is commonly used worldwide in pelvic osteoarthritis treatment. This surgery can change the spinopelvic parameters, which in turn affects the performance of the patients after surgery. However, the relationship between functional disability following THA and spinopelvic alignment is not completely understood. The limited available studies have also been conducted on the population with spinopelvic malalignments. This study aimed to examine the changes in spinopelvic parameters after primary THA in patients with normal preoperative spinopelvic characteristics and the association of these parameters with the performance, gender, and age of the patients after THA.

METHODS

Fifty-eight eligible patients with unilateral primary hip osteoarthritis (HOA) scheduled for total hip arthroplasty between February and September 2021 were studied. Spinopelvic parameters including pelvic incidence (PI), sacral slope (SS), and pelvic tilt (PT) were measured before surgery and three months after surgery, and the relationship between these parameters and patients' performance (Harris hip score) was assessed. Also, the relationship between the age and gender of the patients with these parameters was evaluated.

RESULTS

The mean age of study participants was 46.03 ± 14.25. Three months after THA, sacral slope decreased with the mean difference of 4.31 ± 10.26 degrees (p = 0.002) and Harris hip score (HHS) increased by 19.41 ± 26.55 points (p < 0.001). With increasing age in patients, the mean SS and PT decreased. Among the spinopelvic parameters, SS (β = 0.11) had a greater effect than PT on postoperative HHS changes and among the demographic parameters, age (β = -0.18) had a greater effect on HHS changes than gender.

CONCLUSION

Spinopelvic parameters are associated with age, gender, and patient's function after THA as sacral slope decreased and HHS increased after THA, and aging is accompanied by lowering of PT and SS.

A patient-specific algorithm for predicting the standing sagittal pelvic tilt one year after total hip arthroplasty

Aims

The aim of this study was to evaluate the reliability and validity of a patient-specific algorithm which we developed for predicting changes in sagittal pelvic tilt after total hip arthroplasty (THA).

Methods

This retrospective study included 143 patients who underwent 171 THAs between April 2019 and October 2020 and had full-body lateral radiographs preoperatively and at one year postoperatively. We measured the pelvic incidence (PI), the sagittal vertical axis (SVA), pelvic tilt, sacral slope (SS), lumbar lordosis (LL), and thoracic kyphosis to classify patients into types A, B1, B2, B3, and C. The change of pelvic tilt was predicted according to the normal range of SVA (0 mm to 50 mm) for types A, B1, B2, and B3, and based on the absolute value of one-third of the PI-LL mismatch for type C patients. The reliability of the classification of the patients and the prediction of the change of pelvic tilt were assessed using kappa values and intraclass correlation coefficients (ICCs), respectively. Validity was assessed using the overall mean error and mean absolute error (MAE) for the prediction of the change of pelvic tilt.

Results

The kappa values were 0.927 (95% confidence interval (CI) 0.861 to 0.992) and 0.945 (95% CI 0.903 to 0.988) for the inter- and intraobserver reliabilities, respectively, and the ICCs ranged from 0.919 to 0.997. The overall mean error and MAE for the prediction of the change of pelvic tilt were -0.3° (SD 3.6°) and 2.8° (SD 2.4°), respectively. The overall absolute change of pelvic tilt was 5.0° (SD 4.1°). Pre- and postoperative values and changes in pelvic tilt, SVA, SS, and LL varied significantly among the five types of patient.

Conclusion

We found that the proposed algorithm was reliable and valid for predicting the standing pelvic tilt after THA.

How to Screen for Lumbar Spine Stiffness in Patients Awaiting Total Hip Arthroplasty

BACKGROUND

This study aimed to (1) define the prevalence of spinopelvic abnormalities among patients who have hip osteoarthritis (OA) and controls (asymptomatic volunteers) and (2) identify factors that reliably predict the presence of lumbar spine stiffness.

METHODS

This is a prospective, cross-sectional, case-cohort study of patients who have end-stage primary hip OA, who underwent primary total hip arthroplasty (THA). Patients were compared with a cohort of asymptomatic volunteers, matched for age, sex, and body mass index (BMI), serving as a control group. Spinopelvic pathologies were defined as: lumbar spine flatback deformity (difference of 10 or more degrees for pelvic incidence minus lumbar lordosis angle), a standing sagittal pelvic tilt of 19° or more and lumbar spine stiffness (lumbar flexion of less than 20° between both postures).

RESULTS

The prevalence of spinopelvic pathologies was similar between patients and controls (flatback deformity: 16% versus 10%, P = .209; standing pelvic tilt >19°: 17% versus 24%, P = .218; lumbar spine stiffness: 6% versus 5%, P = .827). Age over 65 years-old and standing lumbar lordosis angle less than 45° were associated with high sensitivity and specificity for identifying lumbar spine stiffness (age >65 years: 82% and 66%; standing lumbar lordosis angle <45°: 85% and 73%).

CONCLUSION

The presence of end-stage hip osteoarthritis was not associated with increased prevalence of adverse spinopelvic characteristics compared to matched, asymptomatic volunteers. Age and LLstanding are the strongest predictors of lumbar spine flexion and can guide clinical practice on when to obtain additional radiographs for patients who have hip OA before arthroplasty to identify at-risk patients.

LEVEL OF EVIDENCE

II (prospective, cohort study).

Increased dislocation rates following total hip arthroplasty in patients with ankylosing spondylitis

BACKGROUND

Patients with ankylosing spondylitis (AS) experience abnormal spinopelvic motion due to chronic inflammation of the axial skeleton, predisposing them to impingement and dislocation. The purpose of this study was to evaluate total hip arthroplasty (THA) dislocation rates in AS patients and evaluate the effects of age and gender on dislocation risk.

METHODS

Patients who underwent primary THA from 2005 to 2014 were identified using the PearlDiver database. AS patients were compared to age- and gender-matched controls without AS. Patients with a history of spine pathology or spine surgery were excluded. Univariate analyses were performed based on age and sex to evaluate dislocation rates at 90 days, 6 months, 1 year, and 5 years postoperatively.

RESULTS

A total of 2792 THA patients (59.6% male) with AS were identified and compared to an age- and gender-matched control group of 5582 THA patients (59.5% male) without AS or known spine pathology. At final follow-up, there were 96 dislocations (3.4%) in the AS group and 138 (2.5%) dislocations in the control group (OR 1.40; 95% CI, 1.08-1.83; p = 0.0118). AS patients ⩾70 years old had higher dislocation rates at all time points (OR range, 1.75-2.09; p < 0.05) compared to controls. At 5-year follow-up, dislocation-free survivorship was 95.7% (95% CI, 94.5-96.9%) for AS patients ⩾70 years old compared to 97.3% (95% CI, 96.6-98.0%) for patients ⩾70 years old without AS.

CONCLUSIONS

Older AS patients have higher dislocation rates following THA. This effect is likely related to decreased spinopelvic motion in the sagittal plane, predisposing patients to impinge and dislocate.

Is Timing of Total Hip Arthroplasty and Lumbar Spine Fusion Associated With Risk of Hip Dislocation?

Background

In patients with concomitant hip and lumbar spine disease, the question of which surgery-total hip arthroplasty (THA) or lumbar spine fusion (LSF)-to address first has not been adequately answered. We aimed to evaluate the risk of dislocation after THA in patients with LSF first or after THA.

Methods

Retrospective review utilizing the PearlDiver database querying Current Procedural Terminology codes for LSF in the year prior (LSF first) or in the year after primary or revision THA (THA first). International Classification of Disease codes identified postoperative hip dislocation as our primary outcome variable. Demographic data collected included age, sex, and obesity. Dislocation rates were described as a proportion of the cohort and compared with chi-square tests.

Results

We identified 280,857 primary THA and 42,314 revision THA cases from 2012-2019. Of these, 2090 underwent primary THA and LSF, and 283 underwent revision THA and LSF within a year of each procedure. No differences in age, sex, or obesity between groups were noted. No difference in rate of all-time dislocation for primary THA was noted for the LSF first 51/1429 (3.6%) compared to the THA first 30/661 (4.0%) groups (P = .34), or for revision THA with LSF first 48/204 (23.5%) compared to THA first 27/117 (23.1%) groups (P = 1.0).

Conclusions

There was no difference in the risk of dislocation after primary or revision THA if LSF occurred prior to or after the THA. These findings can help surgeons as they counsel patients with concomitant lumbar spine and hip degeneration.

Increased Cup Anteversion May Not Prevent Posterior Dislocation in Patients With Abnormal Spinopelvic Characteristics in Total Hip Arthroplasty

Background

The aims of this study were to (1) assess the degree of variation in acetabular component placement and combined anteversion in a large cohort of dislocating total hip arthroplasties; (2) assess the spinopelvic characteristics of the cohort; and (3) examine the association between cup anteversion and reported direction of instability.

Methods

A commercial database of 245 dislocating total hip arthroplasties referred for postoperative computed tomography and functional radiographic imaging and analysis were reviewed. Spinopelvic parameters and cup and stem positions were measured in the supine, standing, flex-seated, and anterior pelvic plane (APP) positions. Spinopelvic characteristics were stratified by high, neutral, and low cup anteversion using thresholds of >35° and <15° anteversion in standing, respectively.

Results

In the dislocation cohort, 62%, 45%, and 42% of cups were within the safe zone in supine, standing, and the APP, respectively (P < .001). Patients with high vs neutral or low cup anteversion had significantly stiffer spines, more posterior pelvic tilt in standing, greater changes in pelvic tilt, and higher sagittal imbalance. Of the 45 patients with high cup anteversion and reported instability direction, 60% and 40% were reported to have posterior and anterior instability, respectively, with no differences in spinopelvic characteristics.

Conclusions

In this dislocating cohort, there is a decreased percentage of cups within the safe zone in the APP and standing position compared to the supine reference. In addition, we found that patients having poor spinopelvic characteristics and high cup anteversion can still dislocate, suggesting that adjusting cup anteversion alone may not be sufficient for preventing instability.

Revealing the Effect of Spinopelvic Alignment on Hip Disorders

Background

Hip osteoarthritis (HOA) is a growing burden and one of the leading causes of hip pain. The relationship between the HOA and the alignment of the spinopelvic region has been intensively studied, however the issue remains controversial. Spinopelvic imbalance, HOA, and dysplasia were investigated in relation to sagittal spinopelvic parameters in this study.

Methods

We collected computerized tomography (CT) topograms of the pelvis or abdomen from 380 patients. In antero-posterior (AP) topograms, Tonnis grading, center-edge angle (CEA) and Sharp's acetabular angle (AA) measurements were performed on each patient. Lateral topograms were used to evaluate the following spinopelvic parameters for each patient: pelvic incidence (PI), pelvic tilt (PT), sacral slope (SS), sacral table angle (STA), lumbar lordosis (LL), proximal lumbar lordosis (PLL), distal lumbar lordosis (DLL), and PI-LL difference. Initially, the cohort was divided into two subgroups based on whether or not they had HOA. Then, they were divided into two subgroups based on whether or not they had dysplasia. Ultimately, it was divided in half based on the PI-LL imbalance. Statistical analyses were conducted to determine the likely correlations between the spinopelvic parameters of these subgroups. In addition, the correlations between spinopelvic parameters were investigated.

Results

There were 380 patients evaluated. We found no association between HOA or dysplasia and spinopelvic parameters. In addition, there was no association between PI-LL imbalance and HOA or dysplasia.

Conclusion

There was no difference in constant PI and STA angle, besides other variable parameters, between groups having HOA and dysplasia or not. PI-LL imbalance has no effect on HOA and dysplasia.

Current Concepts in Diagnosis and Management of Patients Undergoing Total Hip Replacement with Concurrent Disorders of Spinopelvic Anatomy: A Narrative Review

Despite the high success rate of primary total hip replacement (THR), a significant early revision rate remains, which is largely attributed to instability and dislocations. Despite the implants being placed according to the safe zone philosophy of Lewinnek, occurrence of THR dislocation is not an uncommon complication. Large diagnostic and computational model studies have shown variability in patients' mobility based on the individual anatomic and functional relationship of the hip-pelvis-spine complex. The absolute and relative position of hip replacement components changes throughout motion of the patient's body. In the case of spinopelvic pathology such as spine stiffness, the system reaches abnormal positional states, as shown with computerized models. The clinical result of such pathologic hip positioning is edge loading, implant impingement, or even joint dislocation. To prevent such complications, surgeons must change the dogma of single correct implant positioning and take into account patients' individualized anatomy and function. It is essential to broaden the standard diagnostics and their anatomical interpretation, and correct the pre-operative surgical planning. The need for correct and personalized implant placement pushes forward the development and adaptation of novel technologies in THR, such as robotics. In this current concepts narrative review, we simplify the spinopelvic biomechanics and pathoanatomy, the relevant anatomical terminology, and the diagnosis and management algorithms most commonly used today.

Patient-Specific Safe Zones for Acetabular Component Positioning in Total Hip Arthroplasty: Mathematically Accounting for Spinopelvic Biomechanics

BACKGROUND

Despite a growing understanding of spinopelvic biomechanics in total hip arthroplasty (THA), there is no validated approach for executing patient-specific acetabular component positioning. The purpose of this study was to (1) validate quantitative, patient-specific acetabular "safe zone" component positioning from spinopelvic parameters and (2) characterize differences between quantitative patient-specific acetabular targets and qualitative hip-spine classification targets.

METHODS

From 2,457 consecutive primary THA patients, 22 (0.88%) underwent revision for instability. Spinopelvic parameters were measured prior to index THA. Acetabular position was measured following index and revision arthroplasty. Using a mathematical proof, we developed an open-source tool translating a surgeon-selected, preoperative standing acetabular target to a patient-specific safe zone intraoperative acetabular target. Difference between the patient-specific safe zone and the actual component position was compared before and after revision. Hip-spine classification targets were compared to patient-specific safe zone targets.

RESULTS

Of the 22 who underwent revision, none dislocated at follow-up (4.6 [range, 1 to 6.9]). Patient-specific safe zone targets differed from prerevision acetabular component position by 9.1 ± 4.2° inclination/13.3 ± 6.7° version; after revision, the mean difference was 3.2 ± 3.0° inclination/5.3 ± 2.7° version. Differences between patient-specific safe zones and the median and extremes of recommended hip-spine classification targets were 2.2 ± 1.9° inclination/5.6 ± 3.7° version and 3.0 ± 2.3° inclination/7.9 ± 3.5° version, respectively.

CONCLUSION

A mathematically derived, patient-specific approach accommodating spinopelvic biomechanics for acetabular component positioning was validated by approximating revised, now-stable hips within 5° version and 3° inclination. These patient-specific safe zones augment the hip-spine classification with prescriptive quantitative targets for nuanced preoperative planning.

An Analysis of the Preoperative Factors, Spinopelvic Mobility and Sagittal Spinal Alignment in Pre-THA Patients

Hip arthroplasty is a very effective medical procedure. The optimal positioning of the components and the functioning of the endoprosthesis are influenced, among other things, by the mobility and balance of the spine. The aim of the study was to analyze the factors influencing the mobility of the lumbar-pelvic-iliac complex (spinopelvic mobility) together with the assessment of sagittal spinal alignment in patients prior to THA (total hip arthroplasty). Patients who underwent hip replacement surgery due to advanced osteoarthritis of the hip were enrolled in the study (n = 103). The sociodemographic characteristics, BMI, radiological advancement of the degenerative disease, quality of life, and range of joint mobility were completed using a proprietary questionnaire, the EQ-5D-5L questionnaire, and a clinical examination. X-ray images were analyzed: AP of the pelvis standing up, lateral of the spine standing and sitting. Key parameters were measured as ∆SS-change in sacrum angle value when changing from standing to sitting position and pelvic incidence (PI)-lumbar lordosis (LL) mismatch-sagittal lumbar pelvic balance measured in standing position. The patients were assigned to the appropriate groups according to the Hip-Spine Classification: normal group: 1A (n = 65; 63.1%), abnormal groups: 1B (n = 17; 16.5%), 2A (n = 16; 15.5%), 2B (n = 5; 4.9%). A correlation was shown between the abnormal groups and the individual components of PROMs in the scope of the self-service and normal activities categories (EQ-5D and EQ-VAS). However, the strength of the relationship turned out to be moderate, and the remaining components of the survey were statistically insignificant. The remaining factors analyzed, i.e., age, BMI, the range of hip motion, the presence of contracture in the joint in a clinical examination, and the radiological advancement of osteoarthritis on the Tonnis scale, do not predict abnormal relationships between the spine and the pelvis in our patients waiting for THA. Therefore, further investigations are needed to evaluate the correlation between preoperative factors and the lumbar-pelvic-iliac complex in patients prior to planned hip arthroplasty.

Did the dislocation risk after primary total hip arthroplasty decrease over time? A meta-analysis across six decades

BACKGROUND

While continuous optimization is attempted to decrease the incidence of dislocation after total hip arthroplasty (THA), dislocation remains a major complication. This meta-analysis aims to analyze the evolution of the dislocation risk after primary THA over the decades and to evaluate its potential publication bias.

PATIENTS AND METHODS

A systematic search was performed according to the PRISMA guidelines for this meta-analysis in the literature published between 1962 and 2020. MEDLINE, Cochrane and Embase databases were searched for studies reporting the dislocation risk and length of follow-up. Studies that reported on revision rates only and did not mention separate dislocations were excluded. All study designs were eligible. Study quality was assessed by existing quality assessment tools adjusted for arthroplasty research. Overall risk and yearly dislocation rates were calculated and related to historical time frame, study design, sample size and length of follow-up.

RESULTS

In total, 174 studies were included with an overall moderate quality. In total there were 85.209 dislocations reported in 5.030.293 THAs, showing an overall dislocation risk of 1.7%, with a median follow-up of 24 months. The overall dislocation risk classified per decade decreased from 3.7% in 1960-1970 to 0.7% in 2010-2020. The yearly dislocation rate decreased from 1.8 to 0.7% within these same decades. There was no significant correlation between the reported dislocation risk and the duration of follow-up (p = 0.903) or sample size (p = 0.755). The reported dislocation risk was higher in articles with registry data compared to other study designs (p = 0.021).

CONCLUSION

The dislocation risk in THA has been decreasing over the past decades to 0.7%. Non-selective registry studies reported a higher dislocation risk compared to studies with selective cohorts and RCTs. This indicates that the actual dislocation risk is higher than often reported and 'real-world data' are reflected better in large-scale cohorts and registries.

Creating Consensus in the Definition of Spinopelvic Mobility

INTRODUCTION

The term "spinopelvic mobility" is most often applied to motion within the spinopelvic segment. It has also been used to describe changes in pelvic tilt between various functional positions, which is influenced by motion at the hip, knee, ankle and spinopelvic segment. In the interest of establishing a consistent language for spinopelvic mobility, we sought to clarify and simplify its definition to create consensus, improve communication, and increase consistency with research into the hip-spine relationship.

METHODS

A literature search was performed using the Medline (PubMed) library to identify all existing articles pertaining to spinopelvic mobility. We reported on the varying definitions of spinopelvic mobility including how different radiographic imaging techniques are used to define mobility.

RESULTS

The search term "spinopelvic mobility" returned a total of 72 articles. The frequency and context for the varying definitions of mobility were reported. 41 papers used standing and upright relaxed-seated radiographs without the use of extreme positioning, and 17 papers discussed the use of extreme positioning to define spinopelvic mobility.

DISCUSSION

Our review suggests that the definitions of spinopelvic mobility is not consistent in the majority of published literature. We suggest descriptions of spinopelvic mobility independently consider spinal motion, hip motion, and pelvic position, while recognizing and describing their interdependence.