Functionalized carbon nanotubes as suitable scaffold materials for proliferation and differentiation of canine mesenchymal stem cells

Nanoscale Morphologies on the Surface of Substrates/Scaffolds Enhance Chondrogenic Differentiation of Stem Cells: A Systematic Review of the Literature

Nanoscale morphologies on the surface of substrates/scaffolds have gained considerable attention in cartilage tissue engineering for their potential to improve chondrogenic differentiation and cartilage regeneration outcomes by mimicking the topographical and biophysical properties of the extracellular matrix (ECM). To evaluate the influence of nanoscale surface morphologies on chondrogenic differentiation of stem cells and discuss available strategies, we systematically searched evidence according to the PRISMA guidelines on PubMed, Embase, Web of Science, and Cochrane (until April 2024) and registered on the OSF (osf.io/3kvdb). The inclusion criteria were (in vitro) studies reporting the chondrogenic differentiation outcomes of nanoscale morphologies on the surface of substrates/scaffolds. The risk of bias (RoB) was assessed using the JBI-adapted quasi-experimental study assessment tool. Out of 1530 retrieved articles, 14 studies met the inclusion criteria. The evidence suggests that nanoholes, nanogrills, nanoparticles with a diameter of 10-40nm, nanotubes with a diameter of 70-100nm, nanopillars with a height of 127-330nm, and hexagonal nanostructures with a periodicity of 302-733nm on the surface of substrates/scaffolds result in better cell adhesion, growth, and chondrogenic differentiation of stem cells compared to the smooth/unpatterned ones through increasing integrin expression. Large nanoparticles with 300-1200nm diameter promote pre-chondrogenic cellular aggregation. The synergistic effects of the surface nanoscale topography and other environmental physical characteristics, such as matrix stiffness, also play important in the chondrogenic differentiation of stem cells. The RoB was low in 86% (12/14) of studies and high in 14% (2/14). Our study demonstrates that nanomorphologies with specific controlled properties engineered on the surface of substrates/scaffolds enhance stem cells' chondrogenic differentiation, which may benefit cartilage regeneration. However, given the variability in experimental designs and lack of reporting across studies, the results should be interpreted with caution.

Advancements and mechanisms of stem cell-based therapies for spinal cord injury in animals

Spinal cord injury (SCI) is a neurodegenerative disorder of the central nervous system that can lead to permanent loss of sensation and voluntary movement beyond the affected area. Extensive preclinical and clinical trials have been conducted to evaluate the safety and effectiveness of stem cells for the treatment of various central nervous system diseases or disorders, including SCI. However, several challenges hinder nerve cell regeneration in the injured spinal cord, such as extensive cell loss, limited neural cell regeneration capacity, axonal disruption, and the presence of growth-inhibiting molecules, particularly astroglial scarring or glial scars at the injury site in chronic cases. These obstacles pose significant challenges for physicians in restoring normal motor and sensory nerve function in both humans and animals following SCI. This review focuses on SCI pathogenesis, the mechanisms underlying the therapeutic potential of mesenchymal stem cells in SCI, and the potential of stem cell-based therapies as promising avenues for treatment. This review article also included relevant preclinical and clinical data from animal studies.

Canine umbilical cord tissue derived mesenchymal stem cells naturally express mRNAs of some antimicrobial peptides

Antimicrobial peptides (AMPs) are naturally produced by all living organisms at a constitutive rate. They represent the first line of active defence systems against invading microorganisms, helping in innate immunity. Besides their therapeutic applications, great attention has also been given to the mesenchymal stem cells (MSCs) due to their antimicrobial activities. The study aimed to observe the mRNA expression profile of few antimicrobial peptides (AMPs) in canine MSCs during standard in vitro culture. MSCs were isolated from canine umbilical cord tissue, propagated and characterized by morphology, surface markers and tri-lineage differentiation capability. The mRNA expression of eleven commonly known antimicrobial peptides was checked by Reverse Transcriptase PCR. It has been found for the first time that canine MSCs naturally express the mRNAs of AMPs like C-X-C motif chemokine ligand 8 (CXCL8), Elafin (PI3), Hepcidin (HAMP), Lipocalin 2 (LCN2) and Secretory leukocyte protease inhibitor (SLPI). However, their expressions at protein level and, relation with antimicrobial effect of canine MSCs need to be explored.

Nanomaterial-Based Scaffolds for Tissue Engineering Applications: A Review on Graphene, Carbon Nanotubes and Nanocellulose

Nanoscale biomaterials have garnered immense interest in the scientific community in the recent decade. This review specifically focuses on the application of three nanomaterials, i.e., graphene and its derivatives (graphene oxide, reduced graphene oxide), carbon nanotubes (CNTs) and nanocellulose (cellulose nanocrystals or CNCs and cellulose nanofibers or CNFs), in regenerating different types of tissues, including skin, cartilage, nerve, muscle and bone. Their excellent inherent (and tunable) physical, chemical, mechanical, electrical, thermal and optical properties make them suitable for a wide range of biomedical applications, including but not limited to diagnostics, therapeutics, biosensing, bioimaging, drug and gene delivery, tissue engineering and regenerative medicine. A state-of-the-art literature review of composite tissue scaffolds fabricated using these nanomaterials is provided, including the unique physicochemical properties and mechanisms that induce cell adhesion, growth, and differentiation into specific tissues. In addition, in vitro and in vivo cytotoxic effects and biodegradation behavior of these nanomaterials are presented. We also discuss challenges and gaps that still exist and need to be addressed in future research before clinical translation of these promising nanomaterials can be realized in a safe, efficacious, and economical manner.

Evaluation of carbon nanotubes-hydroxyapatite nanocomposites as bioactive implant coats radiated by near infrared laser

This study aimed to evaluate carbon nanotubes-hydroxyapatite nanocomposites as bioactive titanium implant coats and to assess the effect of near-infrared radiation on these nanocomposites. Carbon nanotubes were acid-functionalized, and hydroxyapatite was prepared by the wet-chemical precipitation method. Both precursors were used to prepare the carbon nanotubes-hydroxyapatite nanocomposites in two concentrations of hydroxyapatite (0.5 and 1 wt.%). The formed nanocomposites were characterized and used to coat silanized titanium discs and cylinders. Half the specimens of each group were radiated by near-infrared laser, then wettability and shear bond strength were tested for all specimens. Bioactivity was tested by monitoring the formation of calcium phosphate compounds after soaking in simulated body fluid. A significant increase in wettability and bond strength was found in the radiated coats compared to the non-radiated ones with the 1% hydroxyapatite group showing the highest values followed by 0.5% hydroxyapatite then the carbon nanotubes group. The two-way ANOVA test showed that both the difference in material and the laser treatment have had a statistically significant contribution to the increase in wettability and bond strength. The radiated groups also contributed to the formation of more calcium phosphate crystals of larger sizes and higher degrees of crystallinity.

Interaction of Neural Stem Cells (NSCs) and Mesenchymal Stem Cells (MSCs) as a Promising Approach in Brain Study and Nerve Regeneration

Rapid developments in stem cell research in recent years have provided a solid foundation for their use in medicine. Over the last few years, hundreds of clinical trials have been initiated in a wide panel of indications. Disorders and injuries of the nervous system still remain a challenge for the regenerative medicine. Neural stem cells (NSCs) are the optimal cells for the central nervous system restoration as they can differentiate into mature cells and, most importantly, functional neurons and glial cells. However, their application is limited by multiple factors such as difficult access to source material, limited cells number, problematic, long and expensive cultivation in vitro, and ethical considerations. On the other hand, according to the available clinical databases, most of the registered clinical trials involving cell therapies were carried out with the use of mesenchymal stem/stromal/signalling cells (MSCs) obtained from afterbirth or adult human somatic tissues. MSCs are the multipotent cells which can also differentiate into neuron-like and glia-like cells under proper conditions in vitro; however, their main therapeutic effect is more associated with secretory and supportive properties. MSCs, as a natural component of cell niche, affect the environment through immunomodulation as well as through the secretion of the trophic factors. In this review, we discuss various therapeutic strategies and activated mechanisms related to bilateral MSC–NSC interactions, differentiation of MSCs towards the neural cells (subpopulation of crest-derived cells) under the environmental conditions, bioscaffolds, or co-culture with NSCs by recreating the conditions of the neural cell niche.

Biomimetic approach to articular cartilage tissue engineering using carbon nanotube-coated and textured polydimethylsiloxane scaffolds

There is a significant need to understand the complexity and heterogeneity of articular cartilage to develop more effective therapeutic strategies for diseases such as osteoarthritis. Here, we show that carbon nanotubes (CNTs) are excellent candidates as a material for synthetic scaffolds to support the growth of chondrocytes—the cells that produce and maintain cartilage. Chondrocyte morphology, proliferation, and alignment were investigated as nanoscale CNT networks were applied to macroscopically textured polydimethylsiloxane (PDMS) scaffolds. The application of CNTs to the surface of PDMS‐based scaffolds resulted in an up to 10‐fold increase in cell adherence and 240% increase in proliferation, which is attributable to increased nanoscale roughness and hydrophilicity. The introduction of macroscale features to PDMS induced alignment of chondrocytes, successfully mimicking the cell behavior observed in the superficial layer of cartilage. Raman spectroscopy was used as a noninvasive, label‐free method to monitor extracellular matrix production and chondrocyte phenotype. Chondrocytes on these scaffolds successfully produced collagen, glycosaminoglycan, and aggrecan. This study demonstrates that introducing physical features at different length scales allows for a high level of control over tissue scaffold design and, thus, cell behavior. Ultimately, these textured scaffolds can serve as platforms to improve the understanding of osteoarthritis and for early‐stage therapeutic testing.

Modelling of Stem Cells Microenvironment Using Carbon-Based Scaffold for Tissue Engineering Application-A Review

A scaffold is a crucial biological substitute designed to aid the treatment of damaged tissue caused by trauma and disease. Various scaffolds are developed with different materials, known as biomaterials, and have shown to be a potential tool to facilitate in vitro cell growth, proliferation, and differentiation. Among the materials studied, carbon materials are potential biomaterials that can be used to develop scaffolds for cell growth. Recently, many researchers have attempted to build a scaffold following the origin of the tissue cell by mimicking the pattern of their extracellular matrix (ECM). In addition, extensive studies were performed on the various parameters that could influence cell behaviour. Previous studies have shown that various factors should be considered in scaffold production, including the porosity, pore size, topography, mechanical properties, wettability, and electroconductivity, which are essential in facilitating cellular response on the scaffold. These interferential factors will help determine the appropriate architecture of the carbon-based scaffold, influencing stem cell (SC) response. Hence, this paper reviews the potential of carbon as a biomaterial for scaffold development. This paper also discusses several crucial factors that can influence the feasibility of the carbon-based scaffold architecture in supporting the efficacy and viability of SCs.

Cytocompatibility of carboxylated multi-wall carbon nanotubes in stem cells from human exfoliated deciduous teeth

Carboxylated multi-wall carbon nanotube (MWCNT-COOH) presents unique properties due to nanoscale dimensions and permits a broad range of applications in different fields, such as bone tissue engineering and regenerative medicine. However, the cytocompatibility of MWCNT-COOH with human stem cells is poorly understood. Thus, studies elucidating how MWCNT-COOH affects human stem cell viability are essential to a safer application of nanotechnologies. Using stem cells from the human exfoliated deciduous teeth model, we have evaluated the effects of MWCNT-COOH on cell viability, oxidative cell stress, and DNA integrity. Results demonstrated that despite the decreased metabolism of mitochondria, MWCNT-COOH had no toxicity against stem cells. Cells maintained viability after MWCNT-COOH exposure. MWCNT-COOH did not alter the superoxide dismutase activity and did not cause genotoxic effects. The present findings are relevant to the potential application of MWCNT-COOH in the tissue engineering and regenerative medicine fields.

Thin films of functionalized carbon nanotubes support long-term maintenance and cardio-neuronal differentiation of canine induced pluripotent stem cells

Induced pluripotent stem cells (iPSCs) are a promising cell source for regenerative medicine. However, their feeder-free maintenance in undifferentiated states remains challenging. In recent past extensive studies have been directed using pristine or functionalized carbon nanotube in tissue engineering. Here we proposed thin films of functionalized carbon nanotubes (OH-single-walled CNTs [SWCNTs] and OH-multiwalled CNTs [MWCNTs]), as alternatives for the feeder-free in vitro culture of canine iPSCs (ciPSCs), considered as the cellular model. The ciPSC colonies could maintain their dome-shaped compactness and other characteristics when propagated on CNT films. Concomitantly, high cell viability and upregulation of pluripotency-associated genes and cell adhesion molecules were observed, further supported by molecular docking. Moreover, CNTs did not have profound toxic effects compared to feeder cultures as evident by cytocompatibility studies. Further, cardiac and neuronal differentiation of ciPSCs was induced on these films to determine their influence on the differentiation process. The cells retained differentiation potential and the nanotopographical features of the substrates provided positive cues to enhance differentiation to both lineages as evident by immunocytochemical staining and marker gene expression. Overall, OH-SWCNT provided better cues, maintained pluripotency, and induced the differentiation of ciPSCs. These results indicate that OH-functionalized CNT films could be used as alternatives for the feeder-free maintenance of ciPSCs towards prospective utilization in regenerative medicine.

Transdifferentiation of canine mesenchymal stem cells into neuron-like cells by induction with β-mercaptoethanol

The objective of this study was to check whether β- mercaptoethanol in a culture medium can induce the neuronal differentiation of canine MSCs. The canine bonemarrow derived MSCs were first pre-inducted with 1 mM BME for 24 hrs followed by induction in a serum-free medium supplemented with 4 mM BME without FBS for another 6 days. Morphological changes in MSCs from spindle-shaped to neuron-like branching from the edges of the cells were noticed at the end of induction. These neuronlike cells were found positive for the immunophenotypic expression of different neural cell markers β-tubulin III, MAP-2 and Nestin. In RT-PCR analysis, it was also evident that the relative expressions of these representative genes were significantly higher in the differentiated cells. On the basis of our observations, it can be summarized that the BME induction of canine MSCs resulted in morphological changes that resembled neuron-like cells which were found to express the representative neuronal markers. Therefore, inducing canine MSCs with BME resulted in the generation of neuron-like cells that might be utilized for the prospective therapeutic applications in veterinary medicine.

In vitro propagation and cardiac differentiation of canine induced pluripotent stem cells on carbon nanotube substrates

Induced pluripotent stem cells (iPSCs) have attracted an interest for personalized cell based therapy along with various other applications. There have been few studies that effective nanomaterial based scaffolds act as alternative to the commonly used feeder dependent in vitro maintenance of iPSCs. The present study provides the fundamental information on ex vivo behavior of canine iPSC (ciPSCs) maintained on carboxylic acid (COOH) functionalized single-walled carbon nanotubes (COOH-SWCNTs) and multi-walled carbon nanotubes (COOH-MWCNTs) substrates. Here in we evaluated the comparative colony morphology, propagation, characterization, cytocompatibility and differentiation capability of ciPSC cultured on MEF feeder taken as control, and COOH-SWCNTs and COOH-MWCNTs substrates. We observed a healthy growth of ciPSCs on both the types of carbon nanotubes (CNTs) similar to feeder. The ciPSC colonies grown on both CNTs were positive for alkaline phosphatase staining and expressed pluripotent markers with notable significance. Further, the ciPSC colonies grew on these CNTs retained the in vitro differentiation ability into three germ layers as well as cardiac cell. Cytotoxicity analysis revealed that (COOH) functionalized CNTs provided a culture condition of low cytotoxicity. The results of the present study indicated that (COOH) functionalized CNTs could be used as xeno-free substrate to support the maintenance of iPSCs.

Post-calving umbilical cord tissue offcut: A potential source for the isolation of bovine mesenchymal stem cells

Background and Aim:

Veterinary health care is an emergent area in animal sciences and innovative therapeutic approaches happen to be imperative in the present days. In view of the importance of cattle health and production, it is necessary to take up contemporary approach of stem cell therapy in this sector also. This study aimed to standardize an explant culture method of bovine umbilical tissue offcut to isolate mesenchymal stem cells (MSCs) because considerable efforts are required for ensuring easy accessibility and availability of MSCs in bulk quantity, as well as in establishing and characterizing the cell lines.

Materials and Methods:

The umbilical cord (UC) tissue matrix offcut was collected after calving. A simplified in vitro cell isolation technique was followed to collect the emerged out cells from the explants of UC. Further, we expanded these isolated cells in vitro, observed its growth kinetics, and characterized to confirm as per the criterion of bovine MSCs.

Results:

A considerable exponential growth rate of the UC-derived cells was noticed. In addition to their confirmation as MSCs, the cells also exhibited plastic adherent property and maintained the spindle-shaped morphology throughout the in vitro culture. The cultured cells were found positive MSC-specific surface markers CD105, CD90, and CD73 and were negative for hematopoietic cell marker CD45. Cytochemical studies revealed the ability of the cells to differentiate into osteogenic, chondrogenic, and adipogenic lineages.

Conclusion:

This simplified method of isolation and culture of bovine multipotent MSCs from the UC offcut collected after calving could be extrapolated for the greater availability of the cells for prospective therapeutic applications.

Creating Structured Hydrogel Microenvironments for Regulating Stem Cell Differentiation

The development of distinct biomimetic microenvironments for regulating stem cell behavior and bioengineering human tissues and disease models requires a solid understanding of cell-substrate interactions, adhesion, and its role in directing cell behavior, and other physico-chemical cues that drive cell behavior. In the past decade, innovative developments in chemistry, materials science, microfabrication, and associated technologies have given us the ability to manipulate the stem cell microenvironment with greater precision and, further, to monitor effector impacts on stem cells, both spatially and temporally. The influence of biomaterials and the 3D microenvironment's physical and biochemical properties on mesenchymal stem cell proliferation, differentiation, and matrix production are the focus of this review chapter. Mechanisms and materials, principally hydrogel and hydrogel composites for bone and cartilage repair that create "cell-supportive" and "instructive" biomaterials, are emphasized. We begin by providing an overview of stem cells, their unique properties, and their challenges in regenerative medicine. An overview of current fabrication strategies for creating instructive substrates is then reviewed with a focused discussion of selected fabrication methods with an emphasis on bioprinting as a critical tool in creating novel stem cell-based biomaterials. We conclude with a critical assessment of the current state of the field and offer our view on the promises and potential pitfalls of the approaches discussed.

Nanocarrier Mediated siRNA Delivery Targeting Stem Cell Differentiation

Stem cell-based regenerative medicine holds exceptional therapeutic potential and hence the development of efficient techniques to enhance control over the rate of differentiation has been the focus of active research. One of the strategies to achieve this involves delivering siRNA into stem cells and exploiting the RNA interference (RNAi) mechanism. Transport of siRNA across the cell membrane is a challenge due to its anionic property, especially in primary human cells and stem cells. Moreover, naked siRNA incites immune responses, may cause off-target effects, exhibits low stability and is easily degraded by endonucleases in the bloodstream. Although siRNA delivery using viral vectors and electroporation has been used in stem cells, these methods demonstrate low transfection efficiency, cytotoxicity, immunogenicity, events of integration and may involve laborious customization. With the advent of nanotechnology, nanocarriers which act as novel gene delivery vehicles designed to overcome the problems associated with safety and practicality are being developed. The various nanomaterials that are currently being explored and discussed in this review include liposomes, carbon nanotubes, quantum dots, protein and peptide nanocarriers, magnetic nanoparticles, polymeric nanoparticles, etc. These nanodelivery agents exhibit advantages such as low immunogenic response, biocompatibility, design flexibility allowing for surface modification and functionalization, and control over the surface topography for achieving the desired rate of siRNA delivery and improved gene knockdown efficiency. This review also includes discussion on siRNA co-delivery with imaging agents, plasmid DNA, drugs etc. to achieve combined diagnostic and enhanced therapeutic functionality, both for in vitro and in vivo applications.

An in situ hydrogel-forming scaffold loaded by PLGA microspheres containing carbon nanotube as a suitable niche for neural differentiation

The cell-extracellular matrix (ECM) interactions are known to have a strong impact on cell behaviors in neural tissues. Due to complex physiology system and limited regenerative capacity of nervous system, neural tissue engineering has attracted attention as a promising strategy. In this study, we designed a hydrogel loaded by poly (lactic-co-glycolic acid) (PLGA) microspheres containing carbon nanotubes (CNT) and the biochemical differentiation factors, as a scaffold, in order to replicate the neural niche for stem cell growth (and/or differentiation). Different formulations from Hyaluronic acid (H), Poloxamer (P), Ethoxy-silane-capped poloxamer (PE), and cross-linked Alginate (Alg) were utilized as an in situ gel structure matrix to mirror the mechanical properties of the ECM of CNS. Subsequently, conductivity, surface morphology, size of microspheres, and CNT dispersion in microsphere were measured using two probes electrical conductometer, scanning electron microscopy (SEM), dynamic light scattering (DLS), and Raman spectroscopy, respectively. According to SEM and fluorescent microscopy images, CNTs increased the porosity of polymeric structure, which, in turn, facilitated the adhesion of stem cells on the surface of microspheres compared with control. Microstructure and rheological behaviors of different gel compositions were investigated using SEM and parallel-plate oscillatory rheometer, respectively. The MTT assay showed the toxicity profile of hydrogels was appropriate for cell transplantation. The confocal images illustrated the 3D platform of P15%H10% and P20%H5% gel formulations containing the PLGA-CNT microspheres, which allows the proliferation of neural stem cells (NSCs) derived from MSC. The results of real-time PCR and immunocytochemistry showed neuronal differentiation capacity of cultured NSCs derived from MSC in the alginate gel that contained PLGA-CNT microspheres as well as other control groups. The dispersion of the CNT-PLGA microspheres, covered by NSCs, into alginate gel in the presence of induction factors was found to notably enhance the expression of Sox2-SYP and β-Tubulin III neuronal markers.

In Vivo Regeneration of Large Bone Defects by Cross-Linked Porous Hydrogel: A Pilot Study in Mice Combining Micro Tomography, Histological Analyses, Raman Spectroscopy and Synchrotron Infrared Imaging

The transplantation of engineered three-dimensional (3D) bone graft substitutes is a viable approach to the regeneration of severe bone defects. For large bone defects, an appropriate 3D scaffold may be necessary to support and stimulate bone regeneration, even when a sufficient number of cells and cell cytokines are available. In this study, we evaluated the in vivo performance of a nanogel tectonic 3D scaffold specifically developed for bone tissue engineering, referred to as nanogel cross-linked porous-freeze-dry (NanoCliP-FD) gel. Samples were characterized by a combination of micro-computed tomography scanning, Raman spectroscopy, histological analyses, and synchrotron radiation-based Fourier transform infrared spectroscopy. NanoCliP-FD gel is a modified version of a previously developed nanogel cross-linked porous (NanoCliP) gel and was designed to achieve highly improved functionality in bone mineralization. Spectroscopic imaging of the bone tissue grown in vivo upon application of NanoCliP-FD gel enables an evaluation of bone quality and can be employed to judge the feasibility of NanoCliP-FD gel scaffolding as a therapeutic modality for bone diseases associated with large bone defects.

Anisotropically Conductive Biodegradable Scaffold with Coaxially Aligned Carbon Nanotubes for Directional Regeneration of Peripheral Nerves

Fascicular rearrangement of an injured peripheral nerve requires reconnection of nerve sprouts from anterior and Büngner bands from distal sides of the lesion, failing to which leads to inefficient regeneration of the injured nerve. However, existing neural scaffolds have limited neuroregeneration efficiency because of either the lack of alignment of fibers and a conductive second phase, leading to compromised electrical conductivity, or the lack of extracellular matrix components and in vivo validation. The present study reports a biocompatible, multiwall carbon nanotube (MWCNT)-reinforced, anisotropically conductive, electrospun, aligned nanofibrous scaffold, ensuring maximal peripheral nerve regeneration. Electrospinning parameters were modulated to deposit random and parallel fibers in separate scaffolds for comparative analysis on the effect of fiber alignment on regeneration. Both types of scaffolds were reinforced with MWCNTs to impart electrical conductivity. Nonreinforced scaffolds were nonconductive. In this comparative study, MWCNT-reinforced, aligned scaffolds showed better tensile property with increased conductivity along the direction of alignment, thereby ensuring an escalated neural-regeneration rate. Collectively, in vitro studies established the scaffolds to be highly biocompatible, promoting cell growth and proliferation. With 85% more anisotropic conductivity in the direction of the alignment and the degradation kinetics tuned to the regeneration regime, the MWCNT-reinforced, aligned scaffold efficiently healed injured sciatic nerves in rats within 30 days. Rigorous revivification of the tissue was due to coordinated Wallerian degeneration and expedited guided axonal regeneration. Structural and functional analysis of nerves in vivo showed the aligned, MWCNT-reinforced scaffold to be very efficient in peripheral sciatic nerve regeneration. This study notes the efficacy of the coaxially aligned, MWCNT-reinforced neural scaffold, with a capability of establishing remarkable advancement in the field of peripheral neural regeneration.

Macro-, Micro- and Nano-Roughness of Carbon-Based Interface with the Living Cells: Towards a Versatile Bio-Sensing Platform

Integration of living cells with nonbiological surfaces (substrates) of sensors, scaffolds, and implants implies severe restrictions on the interface quality and properties, which broadly cover all elements of the interaction between the living and artificial systems (materials, surface modifications, drug-eluting coatings, etc.). Substrate materials must support cellular viability, preserve sterility, and at the same time allow real-time analysis and control of cellular activity. We have compared new substrates based on graphene and pyrolytic carbon (PyC) for the cultivation of living cells. These are PyC films of nanometer thickness deposited on SiO2 and black silicon and graphene nanowall films composed of graphene flakes oriented perpendicular to the Si substrate. The structure, morphology, and interface properties of these substrates are analyzed in terms of their biocompatibility. The PyC demonstrates interface biocompatibility, promising for controlling cell proliferation and directional intercellular contact formation while as-grown graphene walls possess high hydrophobicity and poor biocompatibility. By performing experiments with C6 glioma cells we discovered that PyC is a cell-friendly coating that can be used without poly-l-lysine or other biopolymers for controlling cell adhesion. Thus, the opportunity to easily control the physical/chemical properties and nanotopography makes the PyC films a perfect candidate for the development of biosensors and 3D bioscaffolds.

Bioactive multiple-bent MWCNTs for sensitive and reliable electrochemical detection of picomolar-level C-reactive proteins

We present multiple-bent multi-walled carbon nanotubes (MWCNTs) that enable the picomolar detection of C-reactive protein (CRP), which is considered to be a promising biomarker for various diseases. The MWCNTs were grown via chemical vapor deposition repeating the asymmetric catalytic CNT growth on atypical carbon nanoparticles that were generated by carbon coating on a silicon substrate. The multiple-bent MWCNTs with the carbon film (CF) possessed abundant hydrophilic functional groups (-COOH and -OH) at their bending sites, resulting in enhanced bioadhesion to collagen and platelets, compared to MWCNTs grown without a CF layer. Interestingly, the bent MWCNTs enhanced the reliability and sensitivity of the electrochemical detection at low CRP concentrations, possibly due to molecular affinity at the bent site. The bioactive bent MWCNTs can play a significant role in ultrasensitive biosensors to improve their detection limit, thereby achieving early detection and monitoring of CRP-related diseases such as cardiovascular events and melanoma.

Applications of Carbon Nanotubes in Bone Regenerative Medicine

Scaffolds are essential for bone regeneration due to their ability to maintain a sustained release of growth factors and to provide a place where cells that form new bone can enter and proliferate. In recent years, scaffolds made of various materials have been developed and evaluated. Functionally effective scaffolds require excellent cell affinity, chemical properties, mechanical properties, and safety. Carbon nanotubes (CNTs) are fibrous nanoparticles with a nano-size diameter and have excellent strength and chemical stability. In the industrial field, they are used as fillers to improve the performance of materials. Because of their excellent physicochemical properties, CNTs are studied for their promising clinical applications as biomaterials. In this review article, we focused on the results of our research on CNT scaffolds for bone regeneration, introduced the promising properties of scaffolds for bone regeneration, and described the potential of CNT scaffolds.

In vitro proliferation and differentiation of canine bone marrow derived mesenchymal stem cells over hydroxyl functionalized CNT substrates

Nanotopography of culture substrate acts as a positive cue in cell-biomaterial based tissue regeneration. Considering the potentiality of carbon nanotubes (CNTs) this study was designed to evaluate its two functionalized form by an in vitro culture condition using canine mesenchymal stem cells as cellular model. Cells were isolated and its behaviour, proliferation and differentiation processes were elucidated onto CNT substrates. Beside the variations in cellular behaviour it was remarkably noted that even though proliferation was reduced but osteogenic and chondrogenic differentiation was enhanced over multi-walled CNTs, whereas neuronal differentiation was better supported by single walled CNTs as evidenced by our cytochemical, immunocytochemical, gene expression and flow cytometry assays. The former one was noticed more cytocompatible by our different apoptosis studies. The outcome of these experiments collectively indicated that hydroxylated functionalized CNTs could be a potential scaffold constituent for future experimentations as well as for the application in regenerative medicine.

Versatile Biomaterial Platform Enriched with Graphene Oxide and Carbon Nanotubes for Multiple Tissue Engineering Applications

Carbon-based nanomaterials, such as graphene oxide (GO) or carbon nanotubes (CNTs) are currently used in various medical applications due to their positive influence on biocompatibility, adhesion, proliferation, and differentiation, as well as their contribution to modulating cell behavior in response to nanomaterial substrates. In this context, in this study, novel flexible membranes based on cellulose acetate (CA) enriched with CNT and GO in different percentages were tested for their versatility to be used as substrates for soft or hard tissue engineering (TE), namely, for their ability to support human adipose-derived stem cells (hASCs) adhesion during adipogenic or osteogenic differentiation. For this purpose, differentiation markers were assessed both at gene and protein levels, while histological staining was performed to show the evolution of the processes in response to CA-CNT-GO substrates. Micro-CT analysis indicated porous morphologies with open and interconnected voids. A slightly lower total porosity was obtained for the samples filled with the highest amount of GO and CNTs, but thicker walls, larger and more uniform pores were obtained, providing beneficial effects on cell behavior and increased mechanical stability. The addition of 1 wt% GO and CNT to the biocomposites enhanced hASCs adhesion and cytoskeleton formation. The evolution of both adipogenic and osteogenic differentiation processes was found to be augmented proportionally to the GO-CNT concentration. In conclusion, CA-CNT-GO biomaterials displayed good properties and versatility as platforms for cell differentiation with potential as future implantable materials in TE applications.

Toxicity of functionalized multi-walled carbon nanotubes on bone mesenchymal stem cell in rats

Carbon nanotubes (CNTs) are promising biomaterials in the medical field, especially in tissue engineering of bone. However, the use of CNTs is largely confined by its unfavorable solubility and toxicity. To improve solubility and biocompatibility of CNTs, functionalization has been proven to be an effective strategy. Although various functionalized CNTs have been extensively studied, only few CNTs have the desired qualities. We compared the toxicity of several promising functionalized multi-walled carbon nanotubes (MWCNTs) on rat bone-marrow derived stem cells (BMSCs). Cell experiments showed that while acid oxidation (AO)-MWCNTs and Raw-MWCNTs exhibited significant toxicity on BMSCs, polyethylene glycols (PEG)-MWCNTs and hydroxyapatit (HA)-MWCNTs had favorable biocompatibility and a trivial effect on BMSCs. Possible mechanisms for the cytotoxicity on BMSCs included mitochondrisome and deoxyribonucleic acid damage, increased oxidative stress and damaging of cellular membranes. Our data indicated that PEG-MWCNTs and HA-MWCNTs may be promising materials for bio-related applications.

Nanogel tectonic porous 3D scaffold for direct reprogramming fibroblasts into osteoblasts and bone regeneration

Transplantation of engineered three-dimensional (3D) bone tissue may provide therapeutic benefits to patients with various bone diseases. To achieve this goal, appropriate 3D scaffolds and cells are required. In the present study, we devised a novel nanogel tectonic material for artificial 3D scaffold, namely the nanogel-cross-linked porous (NanoCliP)-freeze-dried (FD) gel, and estimated its potential as a 3D scaffold for bone tissue engineering. As the osteoblasts, directly converted osteoblasts (dOBs) were used, because a large number of highly functional osteoblasts could be induced from fibroblasts that can be collected from patients with a minimally invasive procedure. The NanoCliP-FD gel was highly porous, and fibronectin coating of the gel allowed efficient adhesion of the dOBs, so that the cells occupied the almost entire surface of the walls of the pores after culturing for 7 days. The dOBs massively produced calcified bone matrix, and the culture could be continued for at least 28 days. The NanoCliP-FD gel with dOBs remarkably promoted bone regeneration in vivo after having been grafted to bone defect lesions that were artificially created in mice. The present findings suggest that the combination of the NanoCliP-FD gel and dOBs may provide a feasible therapeutic modality for bone diseases.

Functionalized carbon nanotubes as emerging delivery system for the treatment of cancer

In recent time, carbon nanotubes (CNTs) have gained vital importance for pharmaceutical formulation scientist for delivering drugs and genes, owing to their excellent surface properties. For example, their aspect ratio is thought to be responsible for their excellent cell penetration aptitude; anisotropic conductivity/semi-conductivity along their axis is ideal for integration with nervous and muscular tissue; an ultrahigh surface area maximizes their ability to "talk" with biological matter; the hollow interior provides an enormous cargo-carrying capacity for drug delivery; and their exteriors are readily functionalized to permit tailoring of solubility and biological recognition. Despite their immense capabilities for the delivery of drugs, genes and other biomedically essential materials, there use is restricted primarily because of the severe toxicity. However, the reactive nature of the surface of the CNTs allowed attaching the guest molecules (drug, siRNA, and diagnostics) of interest which helps in increasing the biocompatibility of these novel nanocarriers. As per the need, CNTs can be modified with peptides, organic molecules, carbohydrates, polymers and used mainly for cancer targeting and tumor cell accumulation. This review expounds different functionalization strategies employed for CNTs that created new opportunities for scientists to improve the potential of delivered therapeutics.