Expression, Solubilization, Refolding and Final Purification of Recombinant Proteins as Expressed in the form of "Classical Inclusion Bodies" in E. coli

A two-step method preparation of semaglutide through solid-phase synthesis and inclusion body expression

Semaglutide is currently the most promising antidiabetic drug, especially for the treatment of type 2 diabetes mellitus, due to its excellent efficacy in glycemic control and weight loss. However, the production of semaglutide remains high cost, and high yield, low cost, and high purity still remains a challenge. Herein, we reported a convenient and high-yield strategy for the preparation of semaglutide through fragmented condensation coupling, involving solid-phase peptide synthesis of tetrapeptide and on-column refolding and on-column enzyme cleavage based inclusion body expression of Lys26Arg34GLP-1 (11-37) with fused protein tags in an X-Y-D4K-G pattern. The optimized N-terminal protein tag significantly boosts inclusion body expression level, while on-column refolding and on-column enzyme cleavage avoid precipitation, enhancing efficiency and yield together with one-step purification. The successful preparation of semaglutide is expected to achieve large-scale industrial production with low cost, high yield and high purity.

Approaches to produce and characterize recombinant protein VP1-2A of HAV for serological rapid test application

Studies reporting the expression of hepatitis A virus (HAV) structural proteins, specifically recombinant VP1-2A containing an immunogenic activity, use the Escherichia coli system. Recombinant HAV proteins may represent a source of less expensive antigens for application in different diagnostic platforms. However, the formation of insoluble aggregates is an obstacle to obtaining large amounts of HAV proteins in their native form. To overcome this obstacle, some approaches were applied in this study to improve purification, solubility, and protein expression levels. Critical properties were evaluated. The introduction of another insertion codon to increase the protein concentration and vector activity was observed and verified by SDS-PAGE. The expression was established with 0.4 mM IPTG for 4 h at 37 °C. The VP1 protein was partially soluble at an isoeletric point (pI) of 6.45. The majority of HAV VP1-2A proteins measured 45.19 kDa in size and had a homogeneity of 53.58%. Multi-antigen print immunoassay (MAPIA) showed antigenicity at different HAV VP1-2A concentrations, and microsphere-based immunoassays showed a specificity of 100% and a sensitivity of 84%. HAV VP1-2A was characterized using different sensitivity methods to prove its biological activity, indicating its use as a tool for the diagnosis of Hepatitis A virus infection.

Application of Formulation Principles to Stability Issues Encountered During Processing, Manufacturing, and Storage of Drug Substance and Drug Product Protein Therapeutics

The field of formulation and stabilization of protein therapeutics has become rather extensive. However, most of the focus has been on stabilization of the final drug product. Yet, proteins experience stress and degradation through the manufacturing process, starting with fermentaition. This review describes how formulation principles can be applied to stabilize biopharmaceutical proteins during bioprocessing and manufacturing, considering each unit operation involved in prepration of the drug substance. In addition, the impact of the container on stabilty is discussed as well.

Biosynthesis of a VLP-type nanocarrier specific to cancer cells using the BEVS expression system for targeted drug delivery

OBJECTIVE

Canine parvovirus (CPV) is a small virus without an envelope that consists of three viral proteins including VP1, VP2, and VP3. Exclusively, the VP2 can form a typically CPV-sized virus-like particle (CPV-VLP) that can be used as a biological nanocarrier for diagnostic and therapeutic purposes since these VLPs can target cancer cells specially through the transferrin surface receptors (TFRs). Consequently, we aimed to produce these nanocarriers to be used for specific targeting of cancer cells.

METHODS

Sf9 insect cells were transfected with constructed recombinant bacmid shuttle vector encoding an enhanced green fluorescent protein (EGFP) and CPV-VP2 by the cationic lipids of Cellfectin II. Subsequently, two recombinant baculoviruses expressing EGFP and VP2 were produced and expression of VP2 was increased under the optimal condition. In consequence, the CPV-VLP nanoparticles composed of recombinant VP2 subunits were extracted. The purity of VLPs was then evaluated by SDS-PAGE, and the structural integrity and quality of the final product were evaluated by TEM and HA methods. Eventually, the size distribution of the produced biological nanoparticles and their uniformity were determined by the DLS method.

RESULTS

The expression of EGFP protein was confirmed by fluorescent microscopy, and the expression of VP2 protein was evaluated by SDS-PAGE and western blotting. Infected Sf9 insect cells also showed cytopathic effects (CPEs), and the maximum expression of VP2 occurred at MOI of 10 (pfu/cell) at the harvest time of 72 h post-infection (hpi). After performing various stages of purification, buffer exchange, and concentration, the quality and structural integrity of the VLP product were confirmed. The results of the DLS technique showed the presence of uniform particles (PdI below 0.5) with an approximate size of 25 nm.

CONCLUSION

The results indicate BEVS as an appropriate and efficient system for generating CPV-VLPs, and the used method based on two-stage ultracentrifugation was appropriate for purifying these nanoparticles. Produced nanoparticles can be used as the biologic nano-carriers in future studies.

D-Peptide and D-Protein Technology: Recent Advances, Challenges, and Opportunities

Total chemical protein synthesis provides access to entire D-protein enantiomers enabling unique applications in molecular biology, structural biology, and bioactive compound discovery. Key enzymes involved in the central dogma of molecular biology have been prepared in their D-enantiomeric forms facilitating the development of mirror-image life. Crystallization of a racemic mixture of L- and D-protein enantiomers provides access to high-resolution X-ray structures of polypeptides. Additionally, D-enantiomers of protein drug targets can be used in mirror-image phage display allowing discovery of non-proteolytic D-peptide ligands as lead candidates. This review discusses the unique applications of D-proteins including the synthetic challenges and opportunities.

High-Level Production of Soluble Cross-Reacting Material 197 in Escherichia coli Cytoplasm Due to Fine Tuning of the Target Gene's mRNA Structure

Cross-reacting material 197 (CRM197) is a non-toxic mutant of the diphtheria toxin and is widely used as a carrier protein in conjugate vaccines. This protein was first obtained from the supernatant of the mutant Corynebacterium diphtheriae strain. This pathogenic bacteria strain is characterized by a slow growth rate and a relatively low target protein yield, resulting in high production costs for CRM197. Many attempts have been made to establish high-yield protocols for the heterologous expression of recombinant CRM197 in different host organisms. In the present work, a novel CRM197-producing Escherichia coli strain was constructed. The target protein was expressed in the cytoplasm of SHuffle T7 E. coli cells without any additional tags and with a single potential mutation-an additional Met [-1]. The fine tuning of the mRNA structure (the disruption of the single hairpin in the start codon area) was sufficient to increase the CRM197 expression level several times, resulting in 150-270 mg/L (1.1-2.0 mg/g wet biomass) yields of pure CRM197 protein. Besides the high yield, the advantages of the obtained expression system include the absence of the necessity of CRM197 refolding or tag removal. Thus, an extensive analysis of the mRNA structure and the removal of the unwanted hairpins in the 5' area may significantly improve the target protein expression rate.

Protein Extraction and Purification by Differential Solubilization

The preparation of purified soluble proteins for biochemical studies is essential and the solubility of a protein of interest in various media is central to this process. Selectively altering the solubility of a protein is a rapid and economical step in protein purification and is based on exploiting the inherent physicochemical properties of a polypeptide. Precipitation of proteins, released from cells upon lysis, is often used to concentrate a protein of interest before further purification steps (e.g., ion exchange chromatography, size exclusion chromatography etc).Recombinant proteins may be expressed in host cells as insoluble inclusion bodies due to various influences during overexpression. Such inclusion bodies can often be solubilized to be reconstituted as functional, correctly folded proteins.In this chapter, we examine strategies for extraction/precipitation/solubilization of proteins for protein purification. We also present bioinformatic tools to aid in understanding a protein's propensity to aggregate/solubilize that will be a useful starting point for the development of protein extraction, precipitation, and selective re-solubilization procedures.

Inclusion Bodies: Status Quo and Perspectives

Multiple E. coli cultivations, producing recombinant proteins, lead to the formation of inclusion bodies (IBs). IBs historically were considered as nondesired by-products, due to their time- and cost-intensive purification. Nowadays, many obstacles in IB processing can be overcome. As a consequence, several industrial processes with E. coli favor IB formation over soluble production options due to the high space time yields obtained. Within this chapter, we discuss the state-of-the art biopharmaceutical IB process, review its challenges, highlight the recent developments and perspectives, and also propose alternative solutions, compared to the state-of-the art processing.

Bioprocessing of recombinant proteins from Escherichia coli inclusion bodies: insights from structure-function relationship for novel applications

The formation of inclusion bodies (IBs) during expression of recombinant therapeutic proteins using E. coli is a significant hurdle in producing high-quality, safe, and efficacious medicines. The improved understanding of the structure-function relationship of the IBs has resulted in the development of novel biotechnologies that have streamlined the isolation, solubilization, refolding, and purification of the active functional proteins from the bacterial IBs. Together, this overall effort promises to radically improve the scope of experimental biology of therapeutic protein production and expand new prospects in IBs usage. Notably, the IBs are increasingly used for applications in more pristine areas such as drug delivery and material sciences. In this review, we intend to provide a comprehensive picture of the bio-processing of bacterial IBs, including assessing critical gaps that still need to be addressed and potential solutions to overcome them. We expect this review to be a useful resource for those working in the area of protein refolding and therapeutic protein production.

Development of alkaline phosphatase-scFv and its use for one-step enzyme-linked immunosorbent assay for His-tagged protein detection

A histidine (His)-tag is composed of six His residues and typically exerts little influence on the structure and solubility of expressed recombinant fusion proteins. Purification methods for recombinant proteins containing His-tags are relatively well-established, thus His-tags are widely used in protein recombination technology. We established a one-step enzyme-linked immunosorbent assay (ELISA) for His-tagged recombinant proteins. We analyzed variable heavy and light chains of the anti-His-tag monoclonal antibody 4C9 and used BLAST analyses to determine variable zones in light (VL) and heavy chains (VH). VH, VL, and alkaline phosphatase (ALP) regions were connected via a linker sequence and ligated into the pGEX-4T-1 expression vector. Different recombinant proteins with His tags were used to evaluate and detect ALP-scFv activity. Antigen and anti-His-scFv-ALP concentrations for direct ELISA were optimized using the checkerboard method. ZIKV-NS1, CHIKV-E2, SCRV-N, and other His-tag fusion proteins demonstrated specific reactions with anti-His-scFv-ALP, which were accurate and reproducible when the antigen concentration was 50 µg mL−1 and the antibody concentration was 6.25 µg mL−1. For competitive ELISA, we observed a good linear relationship when coating concentrations of recombinant human anti-Müllerian hormone (hAMH) were between 0.78 and 12.5 µg mL−1. Our direct ELISA method is simple, rapid, and accurate. The scFv antibody can be purified using a prokaryotic expression system, which provides uniform product quality and reduces variations between batches.

Bacteria-derived chimeric toxins as potential anticancer agents

Cancer is one of the major causes of death globally, requiring everlasting efforts to develop novel, specific, effective, and safe treatment strategies. Despite advances in recent years, chemotherapy, as the primary treatment for cancer, still faces limitations such as the lack of specificity, drug resistance, and treatment failure. Bacterial toxins have great potential to be used as anticancer agents and can boost the effectiveness of cancer chemotherapeutics. Bacterial toxins exert anticancer effects by affecting the cell cycle and apoptotic pathways and regulating tumorigenesis. Chimeric toxins, which are recombinant derivatives of bacterial toxins, have been developed to address the low specificity of their conventional peers. Through their targeting moieties, chimeric toxins can specifically and effectively detect and kill cancer cells. This review takes a comprehensive look at the anticancer properties of bacteria-derived toxins and discusses their potential applications as therapeutic options for integrative cancer treatment.