Formulation of nanoemulsion: a comparison between phase inversion composition method and high-pressure homogenization method

Exploring the potential of nanoemulgels for dermatological disorders

BACKGROUND AND PURPOSE

Nanoemulgels are an advanced innovation in dermatological formulations designed to treat various skin diseases. By combining the advantages of hydrogels and nanoemulsions, these hybrid systems optimise drug delivery and improve therapeutic results. Because of their nanoscale droplets, nanoemulsions improve solubility by increasing surface area and stability and bioavailability of medications.

METHODS AND RESULTS

When embedded in a hydrogel matrix, their transformation into nanoemulgels, provide regulated and prolonged drug release, ensuring sustained therapeutic action. The ability of nanoemulgels to penetrate deeply into the layers of skin and get past obstacles like the stratum corneum to improve drug penetration and efficacy makes them highly effective in dermatology. Since the gel component helps to reduce the surface and interfacial tension and a rise in spreading coefficient along with the viscosity. The benefits of using NEGs for external use include their thixotropic, greaseless, readily dispersed properties, longer shelf life, emollient, effortlessly removed, non-staining clear, cosmetically attractive and environment friendly characteristics.

CONCLUSIONS

By providing an overview of research on nanoemulgels' permeability mechanisms, pharmacokinetics, uses, properties and the difficulties involved in topical drug delivery for skin disorders, this review emphasises the potential of these materials as topical drug delivery systems in dermatology.

Nano-interventions for dengue: a comprehensive review of control, detection and treatment strategies

Dengue, a formidable life-threatening malady, currently exerts a profound impact upon the Western Pacific and Southeast-Asian developing and underdeveloped nations. The intricacies inherent in addressing dengue are manifold, requiring a concerted effort not only towards vector control but also the implementation of efficacious host treatments to forestall the progression of the disease into severe manifestations, such as hemorrhage and shock. The only vaccine available for dengue in the market is DENGVAXIA, with several other vaccine candidates which are currently in the clinical developmental stages. However, DENGVAXIA, owing to incidences of adverse events in among children, was withdrawn in Philippines. This warrants the development of new safer vaccine candidates. The existent control strategies, regrettably, demonstrate inadequacy in effectively mitigating the rampant dissemination of this ailment. Moreover, the diagnostic and therapeutic modalities exhibit potential for refinement, specifically through precision diagnostics and tailored therapeutic interventions, to enhance the precision and efficacy of dengue management. This comprehensive review endeavors to provide an in-depth elucidation of the utilization of nanotechnology-based approaches synergistically integrated with conventional methodologies in the overarching domains of dengue control, diagnosis, and treatment.

Tailoring moxifloxacin hydrochloride loaded oleic acid liposomes for the topical management of Methicillin-Resistant Staphylococcus aureus (MRSA)- Induced skin infection: In-vitro characterization and in-vivo assessment

Oleic acid liposomes (OALs) are novel vesicular carriers ofunsaturated fatty acids and their corresponding ionized species, arranged within an enclosed lipid bilayer. This study aimed to encapsulate moxifloxacin HCl (MOX), a broad-spectrum antibacterial drug into OALs for effective treatment of Methicillin-resistant Staphylococcus aureus (MRSA) infection through topical application. Various OALs were formulatedby combining varied quantities of phosphatidylcholine (PC), oleic acid (OA), and cholesterol (CH) with 50 mg of MOX. The OALs were produced utilizing varying sonication durations. MOX-loaded OALs were formulated using the thin film hydration method by applying (24) a full factorial design utilizing the Design-Expert® software. The formula for MOX-loaded OALs was OAL13, which consisted of 200 mg of PC and 20 mg of OA. The mixture was sonicated for 5 min. The OAL13 exhibited spherical vesicles with a small diameter and a smooth outer surface. Additionally, the entrapment efficiency was measured to be 75.00 ± 1.41 %, the particle size was 234.65 ± 4.74 nm, the polydispersity index was 0.53 ± 0.01, and the zeta potential was -38.50 ± 0.42 mV. The OAL13 formula exhibited an extended release profile. Moreover, the antibiofilm activity of OAL13 gel and MOX-loaded liposomes gel against MRSA infection demonstrates greater activity than the MOX gel at the maximum concentration used (MIC/2). Furthermore, the in-vivo study showed that OAL13 improved MOX's antimicrobial and immunomodulatory effects against MRSA infection by increasing TLR-2 and IL-1β, as well as their downstream molecules NF-κB and TNF-α. Moreover, the histopathological examination conducted by a skin irritation test has verified the safety of OAL13. Overall, the results demonstrated the significant efficacy of MOX-loaded OALs in the treatment of MRSA infected wounds when applied topically.

Turmeric-black pepper-honey nanoemulsion formulation and antiulcerogenic effect evaluation against ethanol-induced gastric ulcers in rats

Gastric ulcer is a common disorder of the digestive system. The combination of turmeric and honey is known to treat stomach ulcers. However, curcumin, an active component in turmeric, has limitations, i.e., poor water solubility and low oral bioavailability. Therefore, turmeric and honey were formulated into a nanoemulsion with black pepper to enhance curcumin bioavailability. The study followed a systematic approach to optimize the nanoemulsion formula, determine stability, and evaluate ulcer healing activity in rats with ethanol-induced gastric ulcers. Nanoemulsion was prepared using a low-energy emulsification method called emulsion phase inversion (EPI). Two stability evaluations were carried out, i.e., storage and freeze-thaw stability tests. The organoleptic, droplet size, polydispersity index, pH, viscosity, and curcumin content of the nanoemulsion were evaluated. Male Wistar albino rats were induced with 96% ethanol for six days. The rats were divided into six groups, i.e., healthy control, ulcerated control, omeprazole, two different doses of turmeric, honey, and black pepper nanoemulsion (NTBH1 and NTBH2), and turmeric and honey nanoemulsion (NTH). The antiulcer activity was determined by measuring the ulcer area, ulcer index, curative index, ulcer severity score, and histology. The best formula with the smallest droplet size, i.e., 144.6±3.8 nm, was obtained from the nanoemulsion using Tween 80 as surfactant, glycerin as cosolvent, and sodium alginate as viscosity enhancer. The result showed that the nanoemulsion was stable after being stored at 25 and 40°C for four weeks and after six cycles of freeze-thaw test. The ulcer index of the ulcerated rats from the lowest to the highest, i.e., NTBH2, omeprazole, NTH, and NTBH1. In conclusion, the nanoemulsion developed in this study containing turmeric, honey, and black pepper holds promising potential in treating gastric ulcers, offering a hopeful outlook for future treatments.

Addressing overlooked design considerations for nanoemulsions

Despite progress in genetic and molecular research, which has opened up a myriad of targeted therapeutic possibilities, the compromised solubility and absorption profile of therapeutic entities restrict their passage across lipid barriers compromising efficacy. Consequently, nanoemulsions accrued significance as futuristic, safe, and effective lipid-based drug delivery systems due to their inherent array of physicochemical properties and provide exquisite bioavailability, reduced toxicity, and improved solubility of hydrophobic entities based on size and surface area. However, a pronounced gap exists in understanding and addressing challenges that arise during design and development of nanoemulsions. In this context, we have attempted to reconsider overlooked aspects of nanoemulsion design, offering insight into its commercial viability.

Augmentation of antifungal activity of fluconazole using a clove oil nanoemulgel formulation optimized by factorial randomized D-optimal design

In the present study, fluconazole (FLU) showed the highest solubility in clove oil and was selected as the oil phase for the FLU-loaded nanoemulsion (FLU-NE). Among the studied cosurfactants, Labrafac was better than ethanol at providing globules with acceptable sizes and a lower polydispersity index (PDI) when Tween 80 was the surfactant. This optimized FLU-NE was thermodynamically stable. Furthermore, FLU-NE stored at 40 ± 2 °C and 75 ± 5% relative humidity for 6 months demonstrated good stability. The FLU-NE was converted to a FLU-loaded nanoemulsion gel (FLU-NEG) using 2% w/v sodium carboxymethyl cellulose. The FLU-NEG was acceptable in terms of visual appearance and spreadability. Rheological studies revealed pseudoplastic behavior for FLU-NEG. The viscosity of FLU-NEG decreased when the applied rpm was increased. FLU-NEG showed greater drug release than that from a FLU-GEL formulation. Furthermore, the FLU release from FLU-NEG followed the Higuchi model. The results from the in vitro antifungal evaluation of FLU-NEG on Candida albicans ATCC 76615 strain confirmed the increase in the antifungal activity of FLU by clove oil. Significant differences were observed in the zones of inhibition produced by FLU-NEG compared to those produced by the blank nanoemulsion gel (B-NEG), fluconazole suspension (FLU-SUS), and nystatin samples. Thus, the increase in the antifungal activity of FLU using clove oil as the oil phase in its nanoemulsion formulation was quite evident from our results. Therefore, the developed FLU-NEG could be considered a potential candidate for further preclinical and clinical studies.

Innovations in Nanoemulsion Technology: Enhancing Drug Delivery for Oral, Parenteral, and Ophthalmic Applications

Nanoemulsions (NEs) are submicron-sized heterogeneous biphasic liquid systems stabilized by surfactants. They are physically transparent or translucent, optically isotropic, and kinetically stable, with droplet sizes ranging from 20 to 500 nm. Their unique properties, such as high surface area, small droplet size, enhanced bioavailability, excellent physical stability, and rapid digestibility, make them ideal for encapsulating various active substances. This review focuses on recent advancements, future prospects, and challenges in the field of NEs, particularly in oral, parenteral, and ophthalmic delivery. It also discusses recent clinical trials and patents. Different types of in vitro and in vivo NE characterization techniques are summarized. High-energy and low-energy preparation methods are briefly described with diagrams. Formulation considerations and commonly used excipients for oral, ocular, and ophthalmic drug delivery are presented. The review emphasizes the need for new functional excipients to improve the permeation of large molecular weight unstable proteins, oligonucleotides, and hydrophilic drugs to advance drug delivery rapidly.

Nanoparticles integrated with mild photothermal therapy and oxaliplatin for tumor chemotherapy and immunotherapy

Aims: Preparation and evaluation of nanoparticles for tumor chemotherapy and immunotherapy mild photothermal therapy and oxaliplatin. Methods: The double emulsion method was used for nanoparticle preparations. Polydopamine was deposited on the surface, which was further modified with folic acid. Cytotoxicity assays were carried out by cell counting kit-8. In vivo antitumor assays were carried out on 4T1 tumor-bearing mice. Results: The nanoparticles exhibited a 190 nm-diameter pomegranate-like sphere, which could increase temperature to 43-46°C. In vivo distribution showed enhanced accumulation. The nanoparticles generated stronger immunogenic cell death effects. By stimulating the maturation of dendritic cells, mild photothermal therapy combined with oxaliplatin significantly increased the antitumor effect by a direct killing effect and activation of immunotherapy. Conclusion: This study provided a promising strategy of combination therapy for tumors.

Balancing competing objectives in bigel formulations using many-objective optimization algorithms and different decision-making methods

Many-objective optimization, which deals with balancing multiple competing objectives to find compromised solutions, is essential for solving complex problems. This study explores evolutionary algorithms for optimizing the microstructural, rheological, stability, and drug release properties of bigel systems formulated using structured almond oil, mixed organogelators, and carbopol. The oleogel was identified as the dispersed phase, with droplet sizes ranging from 1.43 µm to 7.37 µm, indicating improved characteristics compared to other bigels. Each formulation exhibited non-Newtonian shear-thinning and thixotropic behaviors, which were positively influenced by the proportions of the excipients. After undergoing multiple stress cycles, highly concentrated bigels exhibited phase separation. Unexpectedly, bigels with lower viscosity exhibited reduced rates of drug release. FT-IR and HPLC analyses confirmed the compatibility and stability of drug-excipient interactions, with impurities remaining below 4%. This study emphasizes the complex interactions within mixed lipid-based bigels, requiring many-objective optimization techniques to address conflicting objectives. The objectives of optimization involve simultaneously minimizing microstructural properties while maximizing structural recovery and drug release properties. This led to conflicting objectives, where achieving higher structural recovery did not align with the desired drug release rate. Additionally, more stable formulations did not meet the optimal microstructural objectives. To resolve these conflicts, an RSM-MaOEAs approach was applied, employing various decision-making methods. Among EAs, RSM-RVEA notably achieved exceptional convergence. Furthermore, three MaOEAs-integrated decision-making methods-WSM, WPM, NED-and the RSM-desirability, offered potential solutions. Overall, this research proposes a robust framework for compromising the bigels' performance and stability, with broader applications in drug delivery and related fields.

Assessment of acute and subacute toxicity, pharmacokinetics, and biodistribution of eugenol nanoparticles after oral exposure in Wistar rats

The present study aimed to assess the safety, toxicity, biodistribution, and pharmacokinetics of eugenol nanoparticles (EONs) following oral administration in Wistar rat models. In the acute toxicity study, the rats were given a fixed dose of 50, 300, and 2000 mg/kg body weight per group orally and screened for 2 weeks after administration. In the subacute study, three different doses (500, 1000, and 2000 mg/kg BW) of EON were administered for 28 days. The results indicated no significant differences in food and water consumption, bodyweight change, hematological and biochemical parameters, relative organ weights, gross findings, or histopathology compared to the control. Additionally, no significant changes were observed in the expression profiles of inflammatory cytokines such as IL-1, IL-6, and TNFα in the plasma, confirming the absence of systemic inflammation. Biodistribution analysis revealed rapid absorption of eugenol and improved bioavailability due to gradual and sustained release, leading to a maximum eugenol concentration of 15.05 μg/mL (Cmax) at approximately 8 h (Tmax) in the blood plasma. Thus, the study provides valuable insights into the utilization of EON for enhancing the stability, solubility, and sustained release of eugenol and highlights its promising safety profile in vivo.

Novel Therapeutic Hybrid Systems Using Hydrogels and Nanotechnology: A Focus on Nanoemulgels for the Treatment of Skin Diseases

Topical and transdermal drug delivery are advantageous administration routes, especially when treating diseases and conditions with a skin etiology. Nevertheless, conventional dosage forms often lead to low therapeutic efficacy, safety issues, and patient noncompliance. To tackle these issues, novel topical and transdermal platforms involving nanotechnology have been developed. This review focuses on the latest advances regarding the development of nanoemulgels for skin application, encapsulating a wide variety of molecules, including already marketed drugs (miconazole, ketoconazole, fusidic acid, imiquimod, meloxicam), repurposed marketed drugs (atorvastatin, omeprazole, leflunomide), natural-derived compounds (eucalyptol, naringenin, thymoquinone, curcumin, chrysin, brucine, capsaicin), and other synthetic molecules (ebselen, tocotrienols, retinyl palmitate), for wound healing, skin and skin appendage infections, skin inflammatory diseases, skin cancer, neuropathy, or anti-aging purposes. Developed formulations revealed adequate droplet size, PDI, viscosity, spreadability, pH, stability, drug release, and drug permeation and/or retention capacity, having more advantageous characteristics than current marketed formulations. In vitro and/or in vivo studies established the safety and efficacy of the developed formulations, confirming their therapeutic potential, and making them promising platforms for the replacement of current therapies, or as possible adjuvant treatments, which might someday effectively reach the market to help fight highly incident skin or systemic diseases and conditions.

Chitosan-Based Nanocarriers for Pulmonary and Intranasal Drug Delivery Systems: A Comprehensive Overview of their Applications

The optimization of respiratory health is important, and one avenue for achieving this is through the application of both Pulmonary Drug Delivery System (PDDS) and Intranasal Delivery (IND). PDDS offers immediate delivery of medication to the respiratory system, providing advantages, such as sustained regional drug concentration, tunable drug release, extended duration of action, and enhanced patient compliance. IND, renowned for its non-invasive nature and swift onset of action, presents a promising path for advancement. Modern PDDS and IND utilize various polymers, among which chitosan (CS) stands out. CS is a biocompatible and biodegradable polysaccharide with unique physicochemical properties, making it well-suited for medical and pharmaceutical applications. The multiple positively charged amino groups present in CS facilitate its interaction with negatively charged mucous membranes, allowing CS to adsorb easily onto the mucosal surface. In addition, CS-based nanocarriers have been an important topic of research. Polymeric Nanoparticles (NPs), liposomes, dendrimers, microspheres, nanoemulsions, Solid Lipid Nanoparticles (SLNs), carbon nanotubes, and modified effective targeting systems compete as important ways of increasing pulmonary drug delivery with chitosan. This review covers the latest findings on CS-based nanocarriers and their applications.

Nanoemulsion based edible coatings for quality retention of fruits and vegetables-decoding the basics and advancements in last decade

Fruits and vegetables (F&V) are highly perishable and have important contributions to nutritional and economic sustainability. Although the developing nations have shown an immense increase in the production of horticultural commodities, the post-harvest losses are significant and have an adverse impact on the resources, economy, and environment as well. Nanoemulsion-based carriers are recognized for their diversity, natural origin, and immense potential to restrict losses while boosting the functional attributes of produce. The recent findings attest to nanoemulsions potential for extending the shelf life, managing quality, and reducing the losses of the perishables for sustainable livelihood of the farmers. However, further studies are required to evaluate the biological fate, safety, or potential toxicity of the nanoemulsion-based edible coatings. This review precisely focuses on various matrices used in the production of nanoemulsions, fabrication methods, characterization techniques, and the use of natural emulsifiers instead of chemicals. The future research focus stresses on developing low-cost fabrication techniques for nanoemulsion, improvement of the transmission properties i. e gas transmission rate (GTR), water vapor transmission rate (WVTR), and enhancing the performance of monolayer, bilayer, and other composite nanoemulsion base films. This beyond reducing the postharvest losses shall also restrict burden of the food waste management and related environmental issues at the same time.

Neuroprotective Role of Phytoconstituents-based Nanoemulsion for the Treatment of Alzheimer's Disease

Alzheimer's disease (AD) is the most prevalent form of neurodegenerative disorder (ND), affecting more than 44 million individuals globally as of 2023. It is characterized by cognitive dysfunction and an inability to perform daily activities. The progression of AD is associated with the accumulation of amyloid beta (Aβ), the formation of neurofibrillary tangles (NFT), increased oxidative stress, neuroinflammation, mitochondrial dysfunction, and endoplasmic reticulum stress. Presently, various phytomedicines and their bioactive compounds have been identified for their neuroprotective effects in reducing oxidative stress, alleviating neuroinflammation, and mitigating the accumulation of Aβ and acetylcholinesterase enzymes in the hippocampus and cerebral cortex regions of the brain. However, despite demonstrating promising anti-Alzheimer's effects, the clinical utilization of phytoconstituents remains limited in scope. The key factor contributing to this limitation is the challenges inherent in traditional drug delivery systems, which impede their effectiveness and efficiency. These difficulties encompass insufficient drug targeting, restricted drug solubility and stability, brief duration of action, and a lack of control over drug release. Consequently, these constraints result in diminished bioavailability and insufficient permeability across the blood-brain barrier (BBB). In response to these challenges, novel drug delivery systems (NDDS) founded on nanoformulations have emerged as a hopeful strategy to augment the bioavailability and BBB permeability of bioactive compounds with poor solubility. Among these systems, nanoemulsion (NE) have been extensively investigated for their potential in targeting AD. NE offers several advantages, such as ease of preparation, high drug loading, and high stability. Due to their nanosize droplets, NE also improves gut and BBB permeability leading to enhanced permeability of the drug in systemic circulation and the brain. Various studies have reported the testing of NE-based phytoconstituents and their bioactives in different animal species, including transgenic, Wistar, and Sprague-Dawley (SD) rats, as well as mice. However, transgenic mice are commonly employed in AD research to analyze the effects of Aβ. In this review, various aspects such as the neuroprotective role of various phytoconstituents, the challenges associated with conventional drug delivery, and the need for NDDS, particularly NE, are discussed. Various studies involving phytoconstituent-based NE for the treatment of AD are also discussed.

Crisaborole loaded nanoemulgel for the mitigation of atopic dermatitis in mice model

OBJECTIVE

The present work aims to formulate nanoemulgel of crisaborole (CB) and evaluate its effectiveness against 2,4-Di-nitrochlorobenzene induced (DNCB) atopic dermatitis (AD) in mice.

SIGNIFICANCE

AD is a chronic inflammation of the skin affecting the quality of life. CB is a topical PDE4 inhibitor marketed as a 2% ointment. It, however, possesses poor aqueous solubility. An o/w nanoemulsion shall exhibit an enhanced therapeutic effect owing to the increased solubility of CB and an augmented skin penetration. The addition of a gelling agent to form a nanoemulgel further provides ease of application to the patients.

METHODS

Nanoemulsion was prepared by aqueous titration method using caproyl PGMC, cremophore EL and propylene glycol as the oil, surfactant, and cosurfactant respectively. The formulations were characterized by their size, zeta potential and polydispersity index (PDI). 1% Carbopol 934 was used as the gelling agent to formulate nanoemulgel comprising of optimized nanoemulsion (NE 9). Ex vivo skin permeation of the CB nanoemulgel was compared with the CB ointment. Its therapeutic effect was evaluated in Balb/c mice.

RESULTS

NE 9 comprised of 7.49% oil, 37.45% Smix (1:3) and water 55.06%. Its particle size, PDI and zeta potential were 15.45 ± 5.265 nm, 0.098 and -17.9 ± 8.00 mV respectively. The nanoemulgel exhibited a 3-fold higher permeation flux as compared to the ointment. In vivo studies demonstrated that the nanoemulgel provided better therapeutic effect than the ointment.

CONCLUSION

We can thereby conclude that nanoemulgel formulation can be a successful drug delivery strategy for enhancing the therapeutic effect of CB.

Enhancement of the chemical stability of nanoemulsions loaded with curcumin by unsaturated mannuronate oligosaccharide

Unsaturated mannuronate oligosaccharide (MOS) is an acidic oligosaccharide prepared from alginate-derived polymannuronate by enzymatic depolymerization, followed by double bond formation between C-4 and C-5 at the nonreducing end. In this study, MOS was used as a stabilizer to fabricate O/W nanoemulsions loaded with curcumin (MOS-CUR) for the first time. The results revealed that the MOS-CUR showed small droplet sizes and narrow size distributions and was slightly more stable than normal oil-in-water (O/W) curcumin nanoemulsions (water-CUR). Additionally, MOS can improve the superoxide anion scavenging ability and iron ion reducing ability of the curcumin nanoemulsion system. Although the digestion behaviour of MOS-CUR and water-CUR was similar, the bioavailability of curcumin in MOS-CUR was significantly higher than that in water-CUR. All these results indicated that MOS could be used as a stabilizer for preparing nanoemulsions to easily encapsulate labile nutrients and to enhance the bioavailability and antioxidant capacity of these nutrients.

New trends towards glaucoma treatment: Topical osmoprotective microemulsions loaded with latanoprost

The chronic use of hypotensive agents eventually leads to ocular surface damage and poor patient compliance during glaucoma management. Thus, new sustained drug delivery systems are needed. This work aimed to develop osmoprotective latanoprost-loaded microemulsion formulations as new potential glaucoma treatments with ocular surface protective properties. The microemulsions were characterized and latanoprost encapsulation efficacy determined. In-vitro tolerance, osmoprotective efficacy, cell internalization as well as cell-microemulsion interactions and distribution were performed. In vivo hypotensive activity was conducted in rabbits to assess intraocular pressure reduction and relative ocular bioavailability. Physicochemical characterization showed nanodroplet sizes within 20-30 nm, being in vitro tolerance within 80 and 100% viability in corneal and conjunctival cells. Besides, microemulsions exhibited higher protection under hypertonic conditions than untreated cells. Cell fluorescence lasted for 11 days after short exposure to coumarin-loaded microemulsions (5 min) showing extensive internalization in different cell compartments by electronic microscopy. In vivo studies exhibited that a single instillation of latanoprost-loaded microemulsions reduced the intraocular pressure for several days (4-6 days without polymer and 9-13 days with polymers). Relative ocular bioavailability was 4.5 and 19 times higher than the marketed formulation. These findings suggest the use of these microemulsions as potential combined strategies for extended surface protection and glaucoma treatment.

Meloxicam emulgel potently suppressed cartilage degradation in knee osteoarthritis: Optimization, formulation, industrial scalability and pharmacodynamic analysis

BACKGROUND AND OBJECTIVE

Meloxicam (MLX) is prescribed for the management of pain and inflammation allied with osteoarthritis (OA). However, MLX causes intestinal damage in long term administration. Hence, meloxicam loaded emulgel (MLX-emulgel) was optimized, formulated and examined under stringent parameters in monosodium-iodoacetate (MIA) induced knee OA in Wistar rats.

METHODS AND RESULTS

Nanoemulsion of MLX was fabricated by ultrasonication and microfluidization method with a droplet size of 66.81 ± 5.31-nm and zeta potential of -24.6 ± 0.72-mV. Further, MLX nanoemulsion was optimized with centrifugation, heating-cooling cycles and transmittance parameters in addition to scale-up feasibility with microfluidizer. Post optimization, MLX-nanoemulsion was tailored as emulgel with Carbopol Ultrez 10 NF and assessed for pH, rheology, textural properties, assay and stability features. The in-vitro release study revealed the Korsmeyer-Peppas release kinetics and ex-vivo skin permeation was improved by 6.71-folds. The skin distribution of MLX-emulgel evinced the transfollicular mode of permeation. In-vivo study indicated the protective action of MLX-emulegl expressed in terms of inflammatory cyctokines level, X-ray analysis of knee joints of rats, histopathology and OARSI (Osteoarthritis Research Society International) scoring. MLX-emulgel treated group displayed lower (P < 0.001) level of COX-2 intensity as compared to positive control group. However, it was comparable (P > 0.05) to the normal control group, MLX oral dispersion, i.v. solution and etoricoxib gel groups. MLX-emulgel showcased an alternative to the long term usage of analgesics for relieving the symptoms of knee OA.

CONCLUSION

MLX-emulgel may be a potential candidate for translating in to a clinically viable dosage form in the management of knee OA.

Chia Oil and Mucilage Nanoemulsion: Potential Strategy to Protect a Functional Ingredient

Nanoencapsulation can increase the stability of bioactive compounds, ensuring protection against physical, chemical, or biological degradations, and allows to control of the release of these biocompounds. Chia oil is rich in polyunsaturated fatty acids-8% corresponds to omega 3 and 19% to omega 6-resulting in high susceptibility to oxidation. Encapsulation techniques allow the addition of chia oil to food to maintain its functionality. In this sense, one strategy is to use the nanoemulsion technique to protect chia oil from degradation. Therefore, this review aims to present the state-of-the-art use of nanoemulsion as a new encapsulation approach to chia oil. Furthermore, the chia mucilage-another chia seed product-is an excellent material for encapsulation due to its good emulsification properties (capacity and stability), solubility, and water and oil retention capacities. Currently, most studies of chia oil focus on microencapsulation, with few studies involving nanoencapsulation. Chia oil nanoemulsion using chia mucilage presents itself as a strategy for adding chia oil to foods, guaranteeing the functionality and oxidative stability of this oil.

Optimized Green Nanoemulsions to Remove Pharmaceutical Enoxacin from Contaminated Bulk Aqueous Solution

We attempted to develop green nanoemulsions (ENE1-ENE5) using capryol-C90 (C90), lecithin, Tween 80, and N-methyl-2-pyrrolidone (NMP). HSPiP software and experimentally obtained data were used to explore excipients. ENE1-ENE5 nanoemulsions were prepared and evaluated for in vitro characterization parameters. An HSPiP based QSAR (quantitative structure-activity relationship) module established a predictive correlation between the Hansen solubility parameter (HSP) and thermodynamic parameters. A thermodynamic stability study was conducted under stress conditions of temperature (from -21 to 45 °C) and centrifugation. ENE1-ENE5 were investigated for the influence of size, viscosity, composition, and exposure time on emulsification (5-15 min) on %RE (percent removal efficiency). Eventually, the treated water was evaluated for the absence of the drug using electron microscopy and optical emission spectroscopy. HSPiP program predicted excipients and established the relationship between enoxacin (ENO) and excipients in the QSAR module. The stable green nanoemulsions ENE-ENE5 possessed the globular size range of 61-189 nm, polydispersity index (PDI) of 0.1-0.53, viscosity of 87-237 cP, and ζ potential from -22.1 to -30.8 mV. The values of %RE depended upon the composition, globular size, viscosity, and exposure time. ENE5 showed %RE value as 99.5 ± 9.2% at 15 min of exposure time, which may be due to the available maximized adsorption surface. SEM-EDX (scanning electron microscopy-X-ray dispersive energy mode) and inductively coupled plasma-optical emission spectroscopy (ICP-OES) negated the presence of ENO in the treated water. These variables were critical factors for efficient removal of ENO during water treatment process design. Thus, the optimized nanoemulsion can be a promising approach to treat water contaminated with ENO (a potential pharmaceutical antibiotics).

Physical, morphological and storage stability of clove oil nanoemulsion based delivery system

Clove oil based Nanoemulsions (NE) were prepared ultrasonically using Tween 80 and soy lecithin as synthetic and natural surfactants, respectively. The developed NEs were characterized for various parameters (particle size, polydispersity index, zeta potential, morphology, viscosity, colour, turbidity and pH) and the comparative effect of both the surfactants at variable levels (oil:tween 80-1:1, 1:2, 1:3 and 1:4 and oil: soy lecithin- 1:1, 1:1.5 and 1:2) was assessed. It was found that the type of surfactant and oil to surfactant ratio significantly affected particle size and stability of NEs. The NE prepared using tween 80 @1:3 had smallest average droplet diameter (40.9 nm). The formulated NEs were stored at 25 °C and 4 °C and analyzed for turbidity, pH and phase separation up to 90 days. Results revealed that the type and concentration of the surfactant significantly influenced the particle size and stability of NEs. NEs prepared using tween 80 were found to be more viscous than those prepared with soy lecithin. The prepared clove oil NEs have important implication to be used as a natural delivery system to increase the shelf life of food products.

In Vivo Evaluation of Nanoemulsion Formulations for Metformin and Repaglinide Alone and Combination

Repaglinide and Metformin are used to treat Type 2 diabetes. Repaglinide with poor water solubility has relatively low oral bioavailability (56%) and undergoes hepatic first-pass metabolism. The oral bioavailability of metformin HCl is also low (about 50-60%). The purpose of this study was to prepare nanoemulsion formulations containing metformin HCl or repaglinide alone or in combination and characterize them in vitro and in vivo. Nanoemulsion formulations containing metformin HCl and/or repaglinide were successfully prepared and in vitro characterized. In addition, in vivo efficacy of nanoemulsion formulations was evaluated in a streptozotocin-nicotinamide-induced diabetic rat model. Biochemical, histopathological, and immunohistochemical evaluations were also performed. The mean droplet size and zeta potential values of nanoemulsion formulations were in the range of 110.15±2.64-120.23±2.16 nm and -21.95 - -24.33 mV, respectively. The percent entrapment efficiency values of nanoemulsion formulations were in the range of 93.600%-96.152%. All nanoemulsion formulations had a PDI of ≤0.223. A statistically significant decrease was observed in the blood glucose values of the diabetic rats treated with nanoemulsion formulations containing active substance/substances, compared to diabetic rats (control) (p<0.05). Nanoemulsion formulations (especially nanoemulsion containing metformin HCl and repaglinide combination) have a better antidiabetic activity and are more effective in reducing oxidative stress caused by diabetes.

Nanoemulgel: A Novel Nano Carrier as a Tool for Topical Drug Delivery

Nano-emulgel is an emerging drug delivery system intended to enhance the therapeutic profile of lipophilic drugs. Lipophilic formulations have a variety of limitations, which includes poor solubility, unpredictable absorption, and low oral bioavailability. Nano-emulgel, an amalgamated preparation of different systems aims to deal with these limitations. The novel system prepared by the incorporation of nano-emulsion into gel improves stability and enables drug delivery for both immediate and controlled release. The focus on nano-emulgel has also increased due to its ability to achieve targeted delivery, ease of application, absence of gastrointestinal degradation or the first pass metabolism, and safety profile. This review focuses on the formulation components of nano-emulgel for topical drug delivery, pharmacokinetics and safety profiles.

Fortification by design: A rational approach to designing vitamin D delivery systems for foods and beverages

Over the past few decades, vitamin D deficiency has been recognized as a serious global public health challenge. The World Health Organization has recommended fortification of foods with vitamin D, but this is often challenging because of its low water solubility, poor chemical stability, and low bioavailability. Studies have shown that these challenges can be overcome by encapsulating vitamin D within well-designed delivery systems containing nanoscale or microscale particles. The characteristics of these particles, such as their composition, size, structure, interfacial properties, and charge, can be controlled to attain desired functionality for specific applications. Recently, there has been great interest in the design, production, and application of vitamin-D loaded delivery systems. Many of the delivery systems reported in the literature are unsuitable for widespread application due to the complexity and high costs of the processing operations required to fabricate them, or because they are incompatible with food matrices. In this article, the concept of "fortification by design" is introduced, which involves a systematic approach to the design, production, and testing of colloidal delivery systems for the encapsulation and fortification of oil-soluble vitamins, using vitamin D as a model. Initially, the challenges associated with the incorporation of vitamin D into foods and beverages are reviewed. The fortification by design concept is then described, which involves several steps: (i) selection of appropriate vitamin D form; (ii) selection of appropriate food matrix; (iii) identification of appropriate delivery system; (iv) identification of appropriate production method; (vii) establishment of appropriate testing procedures; and (viii) system optimization.

Self-nanoemulsifying drug delivery system (SNEDDS) mediated improved oral bioavailability of thymoquinone: optimization, characterization, pharmacokinetic, and hepatotoxicity studies

Thymoquinone (TQ) is an antioxidant, anti-inflammatory, and hepatoprotective compound obtained from the black seed oil of Nigella sativa. However, high hydrophobicity, instability at higher pH levels, photosensitivity, and low oral bioavailability hinder its delivery to the target tissues. A self-nanoemulsifying drug delivery system (SNEDDS) was fabricated using the microemulsification technique to address these issues. Its physicochemical properties, thermodynamic stability studies, drug release kinetics, in vivo pharmacokinetics, and hepatoprotective activity were evaluated. The droplet size was in the nano-range (< 90 nm). Zeta potential was measured to be -11.35 mV, signifying the high stability of the oil droplets. In vivo pharmacokinetic evaluation showed a fourfold increase in the bioavailability of TQ-SNEDDS over pure TQ. Furthermore, in a PCM-induced animal model, TQ-SNEDDS demonstrated significant (p < 0.05) hepatoprotective activity compared to pure TQ and silymarin. Reduction in liver biomarker enzymes and histopathological examinations of liver sections further supported the results. In this study, SNEDDS was demonstrated to be an improved oral delivery method for TQ, since it potentiates hepatotoxicity and enhances bioavailability.

Green Nanoemulsion Water/Ethanol/Transcutol/LabM-Based Treatment of Pharmaceutical Antibiotic Erythromycin-Contaminated Aqueous Bulk Solution

Contaminated wastewater released from hospital, domestic, and industrial sources is a major challenge to aquatic animals and human health. In this study, we addressed removal of erythromycin (ERN) from contaminated water employing water/ethanol/Transcutol/Labrafil M 1944 CS (LabM) green nanoemulsions as a nanocarrier system. ERN is a major antibiotic contaminant harming aquatic and human lives. Green nanoemulsions were prepared and evaluated for size, size distribution (measuring polydispersity index), stability, zeta potential, refractive index, and viscosity. Transmission electron microscopy (TEM) was used to visualize morphological behavior. The treated-water was analyzed for ERN by the spectroscopy, scanning electron microscopy-energy-dispersive X-ray analysis mode (SEM-EDX), and inductively coupled plasma-optical emission spectroscopy (ICP-OES) techniques. We studied factors (composition, size, viscosity, and time of exposure) affecting removal efficiency (%RE). The obtained green nanoemulsions (ENE1-ENE5) were stable and clear (<180 nm). ENE5 had the smallest size (58 nm), a low polydispersity index value (0.19), optimal viscosity (∼121.7 cP), and a high negative zeta potential value (-25.4 mV). A high %RE value (98.8%) was achieved with a reduced size, a high water amount, a low Capryol 90 content, and optimal viscosity as evidenced by the obtained results. Moreover, contact time had insignificant effect on %RE. UV-vis spectroscopy, SEM-EDX, and ICP-OES confirmed the absence of ERN from the treated water. Conclusively, ERN can easily be removed from polluted water employing green nanoemulsions prepared from the optimized excipients, and evaluated characteristics.

Garlic and ginger essential oil-based neomycin nano-emulsions as effective and accelerated treatment for skin wounds' healing and inflammation: In-vivo and in-vitro studies

Skin, largest organ of human, is directly exposed to environment and hence is prone to high rates of injuries and microbial infections. Over the passage of time these microbes have developed resistance to antibiotics making them ineffective especially in lower doses and hence, higher dosages or new drugs are required. The current study deals with designing of nano-emulsion (NE) formulations composed of garlic and ginger oils (0.1 %) with neomycin sulphate used in different ratios (0.001, 0.01 and 0.1 %) and combinations. The resulting NEs were characterized for droplet size (145-304 nm), zetapotential (-3.0-0.9 mV), refractive index (1.331-1.344), viscosity (1.10-1.23cP), transmittance (96-99 %), FT-IR and HPLC and found stable over a period of three months. All NEs were also found effective against both gram positive and negative bacterial strains i.e., B. spizizenii, S. aureus, E. coli and S. enterica as compared to pure neomycin sulphate (NS) used as control with highest activity recorded for NE-2 and NE-4 against all strains showing zone of inhibition in range of 22-30 mm and 21-19 mm, respectively. NEs were also tested using rabbit skin excision wound model which potentiates that all the NEs resulted in early recovery with 86-100 % wound healing achieved in 9 days as compared to NS ointment (71 %). The studies confirmed that essential oils when used in combination with traditional drug can lead to much higher efficacies as compared to pure drugs.

Formulation development, optimization and characterization of Pemigatinib-loaded supersaturable self-nanoemulsifying drug delivery systems

Background

Pemigatinib is a small molecule tyrosine kinase inhibitor of fibroblast growth factor receptor inhibitors. The oral bioavailability of Pemigatinib is constricted due to its limited solubility at physiological pH. It is essential to develop a novel formulation of Pemigatinib to improve the intrinsic solubility and to reduce the pharmacokinetic variability. Self-nanoemulsifying drug delivery system is an effective, smart and more adequate formulation approach for poorly soluble drugs. Different from conventional self-nanoemulsifying drug delivery system, a supersaturable self-nanoemulsifying drug delivery system of Pemigatinib was prepared by using a supersaturation promoter.

Results

Among all the oils, Captex® 300 have shown maximum solubility of Pemigatinib. Considering the solubilization potential and emulsification ability Kolliphor®RH 40 was selected as surfactant. Transcutol®HP was selected as co-surfactant. The composition of oil, surfactant and co-surfactant was identified using phase diagrams and further adjusted by simplex-lattice design. HPMC K4M as precipitation inhibitor at 5% concentration resulted in effective supersaturating with increased self-emulsification time. The droplet of sSNEDDS ranges from 166.78 ± 3.14 to 178.86 ± 1.24 nm with PDI 0.212 – 0.256, which is significantly smaller than that observed with plain SNEDDS. TEM images revealed the spherical shape of the nanodroplets. The final optimized formulation formed spontaneous nanoemulsion within 15 secs when added to physiological fluids. The percent transmittance of the diluted formulation was found to be 99.12 ± 0.46. The viscosity was found to be 574 ± 26 centipoises indicating the good flow ability. FTIR and DSC studies indicated the amorphization of the drug. The dissolution profile of sSNEDDS indicated the faster release of drug compared to both pure drug suspension and SNEDDS formulation. The drug release rate is directly proportional to the concentration of the drug. The drug release from the insoluble matrix is a square root of time-dependent Fickian diffusion process. The formulation was found to be stable and transparent at all pH values and the percent transmittance was more than 95%. Any kind of separation or precipitation was not observed at different temperatures cycles. No significant difference was observed with all the samples exposed at different storage conditions.

Conclusions

This study demonstrated the feasibility of stabilizing and improving the in-vitro performance of self-nanoemulsifying drug delivery systems of Pemigatinib by incorporating HPMC K4M as precipitation inhibitor.

Unsaturated guluronate oligosaccharide used as a stabilizer of oil-in-water nanoemulsions loaded with bioactive nutrients

Unsaturated guluronate oligosaccharide (GOS) is generated via alginate-derived polyguluronate (PG) degradation by alginate lyase, followed by formation of a double bond between C-4 and C-5 at the nonreducing end. In this study, GOS was first used as a stabilizer to fabricate O/W nanoemulsions loaded with resveratrol (GOS-RES). Our results revealed that both the GOS-RES and normal O/W resveratrol nanoemulsions (water-RES) showed small droplet sizes and narrow size distributions under certain experimental conditions. However, the particle size and stability of the GOS-RES were slightly greater than those of the water-RES in acidic and neutral environments and at high temperatures. Furthermore, the GOS-RES exhibited a better sustained release effect for resveratrol than the water-RES. Moreover, the GOS-RES showed a significant superoxide radical scavenging effect. All these results demonstrated that GOS has good prospects for preparing nanoemulsions to encapsulate hydrophobic nutrients, which could be applied as food-grade components in beverages and other foods.

Omani Frankincense nanoemulsion formulation efficacy and its latent effects on biological aspects of the spiny bollworm Earias insulana (Boisd.)

Our research shed light on the perspective of formulation technology regarding its responsibility to provide phyto-insecticides that are worthy of research into potential novel applications. There has been an increase in interest in using nanoemulsion as a new formulation in a variety of sectors during the last several decades. Boswellia sacra essential oil (Fam: Burseraceae) from the resin of frankincense trees has been recently proposed as a promising ingredient in a new generation of botanical insecticides. Frankincense nanoemulsion was formulated in 5% ratios comprising frankincense oil, surfactants, and water. A frankincense nanoemulsion was prepared using a high-energy ultra-sonication process and characterized by dynamic light scattering transmission electron microscopy surface tension, viscosity, and zeta potential value. Gas chromatography/mass spectrometry (GC/MS) was used to identify the chemical profiles of frankincense essential oil. Furthermore, insecticidal effects against second instar larvae of the spiny bollworm, Earias insulana, as well as their latent effects on the larvae were studied. In the present study, the formulation was a good nanoemulsion. The surface tension was 53.69, the viscosity was 4.76 cPs, the zeta potential was-10 mV, and the size distribution was 41.30 nm. The polydispersity index (PDI) of the nanoemulsion was found to be 0.26, and the morphology of the frankincense nanoemulsion was visualized in a spherical shape. The main constituents identified in frankincense oil were α-pinene (15.52%); monolinolenin (12.92%); and geranylgeranyl acetate (9.99%). The results showed significant insecticidal activity against the larval stage and considerably decreased the pupation percentage with increasing the volume of the frankincense nanoemulsion. On the other hand, the latent effects of the frankincense nanoemulsion on E. insulana resulted in a higher prolongation of larval and pupal durations as well as a significant reduction in the weight of larvae and pupae of E. insulana. Additionally, frankincense nanoemulsion dramatically influenced the adult emergence percentage. It also caused a significantly lower hatchability percentage compared to the untreated control. The concentrations used and the types of mating combination have a significant effect on the fecundity of E. insulana. This novel frankincense nanoemulsion formulation could be used in strategies to control the spiny bollworm on cotton plants.

Investigation of Factors Influencing Formation of Nanoemulsion by Spontaneous Emulsification: Impact on Droplet Size, Polydispersity Index, and Stability

Interest in nanoemulsion technology has increased steadily in recent years for its widespread applications in the delivery of pharmaceuticals, nutraceuticals, and cosmeceuticals. Rational selection of the composition and the preparation method is crucial for developing a stable nanoemulsion system with desired physicochemical characteristics. In the present study, we investigate the influence of intricate factors including composition and preparation conditions that affect characteristic parameters and the stability of the nanoemulsion formation prepared by the spontaneous emulsification method. Octanoic acid, capryol 90, and ethyl oleate were selected to represent oil phases of different carbon–chain lengths. We explored the impact of the addition mode of the oil–S_mix phase and aqueous phase, vortexing time, K_m (surfactant/cosurfactant) ratio, and the replacement of water by buffers of different pH as an aqueous system. The phase behavior study showed that the S_mix phase had a significant impact on the nanoemulsifying ability of the nanoemulsions composed of oil phases of varying carbon-chain lengths. The mode of mixing of the oil–S_mix phase to the aqueous phase markedly influenced the mean droplet size and size distribution of the nanoemulsions composed of oil phases as capryol 90. Vortexing time also impacted the mean droplet size and the stability of the generated nanoemulsion system depending on the varying carbon-chain length of the oil phase. The replacement of the water phase by aqueous buffers of pH 1.2, 5.5, 6.8, and 7.4 has altered the mean droplet size and size distribution of the nanoemulsion system. Further, the K_m ratio also had a significant influence on the formation of the nanoemulsion system. The findings of this investigation are useful in understanding how the formulation composition and process parameters of the spontaneous emulsification technique are responsible for affecting the physicochemical characteristics and stability of the nanoemulsion system composed of oil of varying carbon-chain (C₈-C₁₈) length.

The Impact of the Oil Phase Selection on Physicochemical Properties, Long-Term Stability, In Vitro Performance and Injectability of Curcumin-Loaded PEGylated Nanoemulsions

A nanotechnology-based approach to drug delivery presents one of the biggest trends in biomedical science that can provide increased active concentration, bioavailability, and safety compared to conventional drug-delivery systems. Nanoemulsions stand out amongst other nanocarriers for being biodegradable, biocompatible, and relatively easy to manufacture. For improved drug-delivery properties, longer circulation for the nanoemulsion droplets should be provided, to allow the active to reach the target site. One of the strategies used for this purpose is PEGylation. The aim of this research was assessing the impact of the oil phase selection, soybean or fish oil mixtures with medium chain triglycerides, on the physicochemical characteristics and injectability of curcumin-loaded PEGylated nanoemulsions. Electron paramagnetic resonance spectroscopy demonstrated the structural impact of the oil phase on the stabilizing layer of nanoemulsions, with a more pronounced stabilizing effect of curcumin observed in the fish oil nanoemulsion compared to the soybean oil one. The design of the experiment study, employed to simultaneously assess the impact of the oil phase, different PEGylated phospholipids and their concentrations, as well as the presence of curcumin, showed that not only the investigated factors alone, but also their interactions, had a significant influence on the critical quality attributes of the PEGylated nanoemulsions. Detailed physicochemical characterization of the NEs found all formulations were appropriate for parenteral administration and remained stable during two years of storage, with the preserved antioxidant activity demonstrated by DPPH and FRAP assays. In vitro release studies showed a more pronounced release of curcumin from the fish oil NEs compared to that from the soybean oil ones. The innovative in vitro injectability assessment, designed to mimic intravenous application, proved that all formulations tested in selected experimental setting could be employed in prospective in vivo studies. Overall, the current study shows the importance of oil phase selection when formulating PEGylated nanoemulsions.

Development of Nanogel Loaded with Lidocaine for Wound-Healing: Illustration of Improved Drug Deposition and Skin Safety Analysis

A wound refers to a cut or blow that may result in primary or secondary infection or even death, if untreated. In the current study, we have explored the wound-healing properties of lidocaine nanogel, owing to its antioxidant and neutrophilic modulatory potential. Initially, the pre-formulation study was performed and then using central composite design (CCD) fabrication and the characterization of lidocaine-loaded nanoemulsion was carried out. After the preparation of a nanogel of lidocaine-loaded nanoemulsion, it was evaluated on various parameters, such as pH, spreadability, extrudability, drug content, in vitro drug release, dermatokinetic study and in vivo skin safety. Based on the pre-formulation study, the maximum solubility of lidocaine was found in oleic acid (324.41 ± 4.19 mg/mL) and in Tween 20 (192.05 ± 8.25 mg/mL), selected as a suitable emulsifier. The refractive index of the optimized nanoemulsion was found to be 1.35 ± 0.04, the electrokinetic potential was recorded as −15.47 ± 0.95 mV. The pH, spreadability and extrudability of nanogel was found to be 6.87 ± 0.51, 73.32 ± 4.59 gm.cm/sec and 107.41 ± 6.42 gm/cm2, respectively. The percentage of the cumulative drug content and drug release from nanogel was found to be 99.94 ± 1.70% and 93.00 ± 4.67%, respectively. Moreover, dermatokinetic study showed significantly (p < 0.0005) improved drug deposition and the in vivo skin safety study showed no sign of dermal erythematous lesion or any visible damage. Stability studies also testified the secureness of nanogel after storage in a prescribed environmental condition. Thus, this study provides substantial evidence for healing wounds effectively and the further evaluation of the in vivo model. The patent related to this work was published in the Indian Official Journal of the Patent Office (Issue number: 20/2022).

Thermosensitive Hydrogels Loaded with Resveratrol Nanoemulsion: Formulation Optimization by Central Composite Design and Evaluation in MCF-7 Human Breast Cancer Cell Lines

The second most common cause of mortality among women is breast cancer. A variety of natural compounds have been demonstrated to be beneficial in the management of various malignancies. Resveratrol is a promising anticancer polyphenolic compound found in grapes, berries, etc. Nevertheless, its low solubility, and hence its low bioavailability, restrict its therapeutic potential. Therefore, in our study, we developed a thermosensitive hydrogel formulation loaded with resveratrol nanoemulsion to enhance its bioavailability. Initially, resveratrol nanoemulsions were formulated and optimized utilizing a central composite-face-centered design. The independent variables for optimization were surfactant level, homogenization speed, and time, while the size and zeta potential were the dependent variables. The optimized nanoemulsion formulation was converted into a sensitive hydrogel using poloxamer 407. Rheological studies proved the formation of gel consistency at physiological temperature. Drug loading efficiency and in vitro drug release from gels were also analyzed. The drug release mechanisms from the gels were assessed using various mathematical models. The effect of the optimized thermosensitive resveratrol nanoemulsion hydrogel on the viability of human breast cancer cells was tested using MCF-7 cancer cell lines. The globule size of the selected formulation was 111.54 ± 4.16 nm, with a zeta potential of 40.96 ± 3.1 mV. Within 6 h, the in vitro release profile demonstrated a release rate of 80%. According to cell line studies, the produced hydrogel of resveratrol nanoemulsion was cytotoxic to breast cancer cells. Overall, the results proved the developed nanoemulsion-loaded thermosensitive hydrogel is a promising platform for the effective delivery of resveratrol for the management of breast cancer.

Topical non-aqueous nanoemulsion of Alpinia galanga extract for effective treatment in psoriasis: in vitro and in vivo evaluation

Non-aqueous nanoemulsion (NANE) of Alpinia galanga extract (AGE) was prepared using Palmester 3595 (MCT oil) as oil phase, Cremophor RH 40-Transcutol P® as surfactant-co-surfactant (S_mix), and glycerin as non-aqueous polar continuous phase. The composition was optimized by applying three-level, four factor Box-Behnken design (BBD). The mean droplet size and zeta potential of the optimized AGE NANE was found to be 60.81 ± 18.88 nm and -7.99 ± 4.14 mV, respectively. The ex vivo permeation studies of AGE NANE and AGE per se on porcine skin reported flux of 125.58 ± 8.36 µg/cm² h^-1 and 12.02 ± 1.64 µg/cm²h^-1, respectively. Therefore, the enhancement ratio has shown 10-folds increase in the flux for AGE NANE when compared to extract per se. Later, confocal laser scanning microcopy confirmed that AGE NANE were able to penetrate into skin's stratum by trans-follicular transport mechanism. The stability studies of AGE NANE confirmed its stability at 30 ± 2℃ /75 ± 5 % RH and 5 ± 3℃. The efficacy of AGE NANE was evaluated in vivo on imiquimod (IMQ) induced mouse model. The mice treated with low and high doses of AGE NANE (groups VI and VII) showed significant (p<0.05) amelioration of psoriasis. Results of histopathology indicated reduction in psoriasis area severity index in AGE NANE treated mice (group VI and group VII).

Transdermal Delivery of Indirubin-Loaded Microemulsion Gel: Preparation, Characterization and Anti-Psoriatic Activity

Psoriasis is an immune disease caused by rapid and incomplete differentiation of skin basal cells. Natural products such as indirubin have historically served as excellent sources for the treatments of psoriasis. However, the poor solubility and bioavailability due to its plane and rigid crystal structure, which limits its efficacy. Herein, to improve the efficacy of indirubin, a hydrogel-based microemulsion drug delivery system was developed for transdermal delivery. The mean droplet size of the optimized microemulsion was 84.37 nm, with a polydispersity index (PDI) less than 0.2 and zeta potential value of 0~−20 mV. The transdermal flux and skin retention of indirubin at 24 h were 47.34 ± 3.59 μg/cm² and 8.77 ± 1.26 μg/cm², respectively. The optimized microemulsion was dispersed in carbomer 934 hydrogel to increase the consistency. The indirubin-loaded microemulsion gel was tested on an imiquimod-induced psoriasis mouse model. Results showed that this preparation can improve psoriasis symptoms by down-regulating the expression of IL-17A, Ki67, and CD4⁺T. This experiment provides great scalability for researchers to treat psoriasis, avoid first-pass effects, and increase the concentration of targeted drugs.

Nanoemulsion-based dosage forms for the transdermal drug delivery applications: A review of recent advances

INTRODUCTION

Nanoemulsion-based drug delivery approaches have witnessed massive acceptance over the years and acquired a significant foothold owing to their tremendous benefits over the others. It has widely been used for transdermal delivery of hydrophobic and hydrophilic drugs with solubility, lipophilicity, and bioavailability issues.

AREAS COVERED

The review highlights the recent advancements and applications of transdermal nanoemulsions. Their utilities and characteristics, clinical pertinence showcasing intellectual properties and advancements, potential in treating disorders accompanying liquid, semisolid, and solid dosage forms, the ability to modulate a drug's physicochemical properties, and regulatory status are thoroughly summarized.

EXPERT OPINION

Despite tremendous therapeutic utilities and extensive investigations, this field of transdermal nanoemulsion-based technologies yet tackles several challenges such as optimum use of surfactant mixtures, economic burden due to high energy consumption during production, lack of concrete regulatory requirement, etc. Provided with the concrete guidelines on the safe use of surfactants, stability, use of scalable and economical methods, and the use of NE as a transdermal system would solve the purpose best as nanoemulsion shows remarkable improvement in drug release profiles and bioavailability of many drugs. Nevertheless, a better understanding of nanoemulsion technology holds a promising outlook and would land more opportunities and better delivery outcomes.

Fabrication of Microfiber-Templated Microfluidic Chips with Microfibrous Channels for High Throughput and Continuous Production of Nanoscale Droplets

A polydimethylsiloxane (PDMS) microfluidic chip with well-interconnected microfibrous channels was fabricated by using an electrospun poly(ε-caprolactone) (PCL) microfibrous matrix and 3D-printed pattern as templates. The microfiber-templated microfluidic chip (MTMC) was used to produce nanoscale emulsions and spheres through multiple emulsification at many small micro-orifice junctions among microfibrous channels. The emulsion formation mechanisms in the MTMC were the cross-junction dripping or Y-junction splitting at the micro-orifice junctions. We demonstrated the high throughput and continuous production of water-in-oil emulsions and polyethylene glycol-diacrylate (PEG-DA) spheres with controlled size ranges from 2.84 μm to 83.6 nm and 1.03 μm to 45.7 nm, respectively. The average size of the water droplets was tuned by changing the micro-orifice diameter of the MTMC and the flow rate of the continuous phase. The MTMC theoretically produced 58 trillion PEG-DA nanospheres per hour without high shear force. In addition, we demonstrated the higher encapsulation efficiency of the PEG-DA microspheres in the MTMC than that of the microspheres fabricated by ultrasonication. The MTMC can be used as a powerful platform for the large-scale and continuous productions of emulsions and spheres.

Preparation of Liposomal Raloxifene-Graphene Nanosheet and Evaluation of Its In Vitro Anticancer Effects

BACKGROUND

In current years, researchers have shown their prime interest in developing multifunctional drug delivery systems, especially against cancers, for effective anticancer outcomes.

METHODOLOGY

Raloxifene (RLX) loaded liposomal-graphene nanosheet (GNS) was developed. The novelty of this work was to enhance the solubilization of RLX and improvement of its bioavailability in the disease area. So, the selection of optimized formula design of experiment was implemented which produced the desired formula with the particle size of 156.333 nm. Further, encapsulation efficiency, in vitro release, and thermodynamic stability of optimized formulation were evaluated. The optimized formulation exhibited prolonged release of RLX for a longer period of 24 h, which can minimize the dose-related toxicity of the drug. Furthermore, optimized formulation demonstrated remarkable thermodynamic stability in terms of phase separation, creaming, and cracking.

RESULTS

The cytotoxicity study on the A549 cell line exhibited significant (P < .05) results in favor of optimized formulation than the free drug. The apoptotic activity was carried out by Annexin V staining and Caspase 3 analysis, which demonstrated remarkable promising results for optimized liposomal formulation.

CONCLUSION

From the findings of the study, it can be concluded that the novel optimized liposomal formulation could be pondered as a novel approach for the treatment of lung cancer.