Salmonella enterica Enteritidis and Heidelberg serotype-specific molecular detection in poultry samples by a rapid isothermal method

1. Loop-mediated isothermal amplification (LAMP) assays were developed to detect Salmonella enterica subspecies enterica serotypes Enteritidis and Heidelberg in poultry farms. These serotype-specific methods were evaluated in comparison with PCR in the analysis of different Salmonella spp. serotypes from a culture collection and poultry farm samples.2. The results demonstrated the specific amplification of the genetic targets safA in all S. Enteritidis (n = 10) and ACF69659 in all S. Heidelberg (n = 36) isolates from the culture collection. The remaining isolates from other Salmonella spp. serotypes (n = 84) and bacterial species (n = 8) were negative in both LAMP assays.3. The methods detected DNAs from S. Enteritidis and S. Heidelberg after a single-step pre-enrichment in buffered peptone water of the poultry samples, which agreed with previously developed PCR methods to detect these same two serotypes.4. In conclusion, LAMP assays were useful for rapid serotype-specific detection, being suitable for surveillance purposes in resource-limited environments such as poultry farms.

Research progress of loop-mediated isothermal amplification in the detection of Salmonella for food safety applications

Salmonella, the prevailing zoonotic pathogen within the Enterobacteriaceae family, holds the foremost position in global bacterial poisoning incidents, thereby signifying its paramount importance in public health. Consequently, the imperative for expeditious and uncomplicated detection techniques for Salmonella in food is underscored. After more than two decades of development, loop-mediated isothermal amplification (LAMP) has emerged as a potent adjunct to the polymerase chain reaction, demonstrating significant advantages in the realm of isothermal amplification. Its growing prominence is evident in the increasing number of reports on its application in the rapid detection of Salmonella. This paper provides a systematic exposition of the technical principles and characteristics of LAMP, along with an overview of the research progress made in the rapid detection of Salmonella using LAMP and its derivatives. Additionally, the target genes reported in various levels, including Salmonella genus, species, serogroup, and serotype, are summarized, aiming to offer a valuable reference for the advancement of LAMP application in Salmonella detection. Finally, we look forward to the development direction of LAMP and expect more competitive methods to provide strong support for food safety applications.

Isothermal nucleic acid amplification and its uses in modern diagnostic technologies

Nucleic acids are prominent biomarkers for diagnosing infectious pathogens using nucleic acid amplification techniques (NAATs). PCR, a gold standard technique for amplifying nucleic acids, is widely used in scientific research and diagnosis. Efficient pathogen detection is a key to adequate food safety and hygiene. However, using bulky thermal cyclers and costly laboratory setup limits its uses in developing countries, including India. The isothermal amplification methods are exploited to develop miniaturized sensors against viruses, bacteria, fungi and other pathogenic organisms and have been applied for in situ diagnosis. Isothermal amplification techniques have been found suitable for POC techniques and follow WHO's ASSURED criteria. LAMP, NASBA, SDA, RCA and RPA are some of the isothermal amplification techniques which are preferable for POC diagnostics. Furthermore, methods such as WGA, CPA, HDA, EXPAR, SMART, SPIA and DAMP were introduced for even more accuracy and robustness. Using recombinant polymerases and other nucleic acid-modifying enzymes has dramatically broadened the detection range of target pathogens under the scanner. The coupling of isothermal amplification methods with advanced technologies such as CRISPR/Cas systems, fluorescence-based chemistries, microfluidics and paper-based sensors has significantly influenced the biosensing and diagnosis field. This review comprehensively analyzed isothermal nucleic acid amplification methods, emphasizing their advantages, disadvantages and limitations.

"Lock-and-key" recognizer-encoded lateral flow assays toward foodborne pathogen detection: An overview of their fundamentals and recent advances

In light of severe health risks of foodborne pathogenic bacterial diseases, the potential utility of point-of-care (POC) sensors is recognized for pathogens detection. In this regard, lateral flow assay (LFA) is a promising and user-friendly option for such application among various technological approaches. This article presents a comprehensive review of "lock-and-key" recognizer-encoded LFAs with respect to their working principles and detection performance against foodborne pathogenic bacteria. For this purpose, we describe various strategies for bacteria recognition including the antibody-based antigen-antibody interactions, nucleic acid aptamer-based recognition, and phage-mediated targeting of bacterial cells. In addition, we also outline the technological challenges along with the prospects for the future development of LFA in food analysis. The LFA devices built based upon many recognition strategies are found to have great potential for rapid, convenient, and effective POC detection of pathogens in complex food matrixes. Future developments in this field should emphasize the development of high-quality bio-probes, multiplex sensors, and intelligent portable readers.

Development of a lateral flow dipstick test for the detection of 4 strains of Salmonella spp. in animal products and animal production environmental samples based on loop-mediated isothermal amplification

OBJECTIVE

This study aimed to develop loop-mediated isothermal amplification (LAMP) combined with lateral flow dipstick (LFD) and compare it with LAMP-AGE, polymerase chain reaction (PCR), and standard Salmonella culture as reference methods for detecting Salmonella contamination in animal products and animal production environmental samples.

METHODS

The SalInvA01 primer, derived from the InvA gene and designed as a new probe for LFD detection, was used in developing this study. Adjusting for optimal conditions by temperature, time, and reagent concentration includes evaluating the specificity and limit of detection. The sampling of 120 animal product samples and 350 animal production environmental samples was determined by LAMP-LFD, comparing LAMP-AGE, PCR, and the culture method.

RESULTS

Salmonella was amplified using optimal conditions for the LAMP reaction and a DNA probe for LFD at 63°C for 60 minutes. The specificity test revealed no cross-reactivity with other microorganisms. The limit of detection of LAMP-LFD in pure culture was 3×102 CFU/mL (6 CFU/reaction) and 9.01 pg/μL in genomic DNA. The limit of detection of the LAMP-LFD using artificially inoculated in minced chicken samples with 5 hours of pre-enrichment was 3.4×104 CFU/mL (680 CFU/reaction). For 120 animal product samples, Salmonella was detected by the culture method, LAMP-LFD, LAMP-AGE, and PCR in 10/120 (8.3%). In three hundred fifty animal production environmental samples, Salmonella was detected in 91/350 (26%) by the culture method, equivalent to the detection rates of LAMP-LFD and LAMP-AGE, while PCR achieved 86/350 (24.6%). When comparing sensitivity, specificity, positive predictive value, and accuracy, LAMP-LFD showed the best results at 100%, 95.7%, 86.3%, and 96.6%, respectively. For Kappa index of LAMP-LFD, indicated nearly perfect agreement with culture method.

CONCLUSION

The LAMP-LFD Salmonella detection, which used InvA gene, was highly specific, sensitive, and convenient for identifying Salmonella. Furthermore, this method could be used for Salmonella monitoring and primary screening in animal products and animal production environmental samples.

Rapid point-of-need detection of bacteria and their toxins in food using gold nanoparticles

Biosensors need to meet the rising food industry demand for sensitive, selective, safe, and fast food safety quality control. Disposable colorimetric sensors based on gold nanoparticles (AuNPs) and localized surface plasmon resonance are low-cost and easy-to-perform devices intended for rapid point-of-need measurements. Recent studies demonstrate various facile and versatile AuNPs-based analytical platforms for the detection of bacteria and their toxins in milk, meat, and other foods. In this review, we introduce the general characteristics and mechanisms of AuNPs calorimetric biosensors, and highlight optimizations needed to strengthen and improve the quality of devices for their application in food matrices.

Advancement in Salmonella Detection Methods: From Conventional to Electrochemical-Based Sensing Detection

Large-scale food-borne outbreaks caused by Salmonella are rarely seen nowadays, thanks to the advanced nature of the medical system. However, small, localised outbreaks in certain regions still exist and could possess a huge threat to the public health if eradication measure is not initiated. This review discusses the progress of Salmonella detection approaches covering their basic principles, characteristics, applications, and performances. Conventional Salmonella detection is usually performed using a culture-based method, which is time-consuming, labour intensive, and unsuitable for on-site testing and high-throughput analysis. To date, there are many detection methods with a unique detection system available for Salmonella detection utilising immunological-based techniques, molecular-based techniques, mass spectrometry, spectroscopy, optical phenotyping, and biosensor methods. The electrochemical biosensor has growing interest in Salmonella detection mainly due to its excellent sensitivity, rapidity, and portability. The use of a highly specific bioreceptor, such as aptamers, and the application of nanomaterials are contributing factors to these excellent characteristics. Furthermore, insight on the types of biorecognition elements, the principles of electrochemical transduction elements, and the miniaturisation potential of electrochemical biosensors are discussed.

An Enhanced Lateral Flow Assay Based on Aptamer-Magnetic Separation and Multifold AuNPs for Ultrasensitive Detection of Salmonella Typhimurium in Milk

In this paper, a novel and ultrasensitive lateral flow assay (LFA) based on aptamer-magnetic separation, and multifold Au nanoparticles (AuNPs) was developed for visual detecting Salmonella enterica ser. Typhimurium (S. Typhimurium). The method realized magnetic enrichment and signal transduction via magnetic separation and achieved signal amplification through hybridizing AuNPs-capture probes and AuNPs-amplification probes to form multifold AuNPs. Two different thiolated single-strand DNA (ssDNA) on the AuNPs-capture probe played different roles. One was combined with the AuNPs-amplification probe on the conjugate pad to achieve enhanced signals. The other was connected to transduction ssDNA1 released by aptamer-magnetic capture of S. Typhimurium, and captured by the T-line, forming a positive signal. This method had an excellent linear relationship ranging from 8.6 × 102 CFU/mL to 8.6 × 107 CFU/mL with the limit of detection (LOD) as low as 8.6 × 100 CFU/mL in pure culture. In actual samples, the visual LOD was 4.1 × 102 CFU/mL, which did not carry out nucleic acid amplification and pre-enrichment, increasing three orders of magnitudes than unenhanced assays with single-dose AuNPs and no magnetic separation. Furthermore, the system showed high specificity, having no reaction with other nontarget strains. This visual signal amplificated system would be a potential platform for ultrasensitive monitoring S. Typhimurium in milk samples.

Screening of specific nucleic acid targets for Cronobacter sakazakii and visual detection by loop-mediated isothermal amplification and lateral flow dipstick method in powdered infant formula

Due to the lack of specific genes for rapid detection methods of Cronobacter sakazakii in food samples, whole genome sequence analysis was performed in this investigation using the basic local alignment search tool. Forty-two DNA fragments unique to C. sakazakii were mined, then primers were designed and screened by PCR and loop-mediated isothermal amplification (LAMP). Two primer sets, CS1 and CS31, were found as specific and stable primers, with their corresponding nucleic acid targets the CSK29544_00235 gene and CSK29544_03484 gene, respectively. Furthermore, compared with 3 genes reported previously, these 2 genes were verified as more specific to C. sakazakii among Cronobacter species, by sequence similarity alignment using Cronobacter MLST databases (http://pubmlst.org/cronobacter). The specificity of the LAMP reaction approached 100% by using 48 bacterial strains, which included 22 C. sakazakii strains. Subsequently, LAMP was combined with visual lateral flow dipstick (LFD) based on the above 2 nucleic acid targets, and was demonstrated as a rapid, efficient method with high specificity. Finally, the detection sensitivity of this assay system for pure cultures and artificially contaminated milk was measured as 4.5 × 10⁰ cfu/mL and 5.7 × 10¹ cfu/g, respectively. Total time to detection for this assay was within 2 h. Thus, the establishment of this LAMP-LFD method shows great significance and potential for rapid detection of C. sakazakii in powdered infant formula.

Evaluation of different target genes for the detection of Salmonella sp. by loop-mediated isothermal amplification

The loop-mediated isothermal amplification (LAMP) technique was used to investigate six salmonella-specific sequences for their suitability to serve as targets for the pathogen identification. Sequences selected for designing LAMP primers were genes invA, bcfD, phoP, siiA, gene62181533 and a region within the ttrRSBCA locus. Primers including single nucleotide polymorphisms were configured as degenerate primers. Specificity of the designed primer sets was determined by means of 46 salmonella and 32 other food- and waterborne bacterial reference species and strains. Primers targeting the ttrRSBCA locus showed 100 % inclusivity of target and exclusivity of other test species and strains. Other primer sets revealed deficiencies, especially regarding Salmonella enterica subsp. II-IV and Salmonella bongori. Additionally, primers targeting the siiA gene failed to detect S. enterica subsp. enterica serotypes Newport and Stanley, whereas bcfD primers did not amplify DNA of S. enterica subsp. enterica serotype Schleissheim. TtrRSBCA primers, providing short detection times and constant melting temperatures of amplification products, achieved best overall performance.

Direct detection of Salmonella from poultry samples by DNA isothermal amplification

1. Salmonellosis is one of the most important diseases in public health and it is usually associated with poultry product consumption. This study aimed to validate rapid methods to detect Salmonella spp. from poultry samples. 2. A DNA isothermal amplification method, previously developed for other matrices, was applied for the specific detection of Salmonella spp. from various samples, including poultry tissues, drag and boot swabs, faeces and feed. A new procedure was validated with Salmonella spp. serotypes and isolates from other enteric bacterial species, as well as naturally contaminated poultry samples. 3. The study demonstrated the successful development and implementation of a procedure, including a DNA isothermal amplification method, for the detection of Salmonella spp. directly from tissues, drag and boot swabs, faeces and feed. The whole procedure can be performed in less than 24 hours and it has been successfully used in a veterinary diagnostic laboratory.

Validation of Droplet Digital Polymerase Chain Reaction for Salmonella spp. Quantification

Salmonellosis is a foodborne disease caused by Salmonella spp. Although cell culture is the gold standard for its identification, validated molecular methods are becoming an alternative, because of their rapidity, selectivity, and specificity. A simplex and duplex droplet digital polymerase chain reaction (ddPCR)-based method for the identification and quantification of Salmonella using ttr, invA, hilA, spaQ, and siiA gene sequences was validated. The method has high specificity, working interval between 8 and 8,000 cp/μL in ddPCR reaction, a limit of detection of 0.5 copies/μL, and precision ranging between 5 and 10% measured as a repeatability standard deviation. The relative standard measurement uncertainty was between 2 and 12%. This tool will improve food safety in national consumption products and will increase the competitiveness in agricultural product trade.

Electricity-free amplification and visual detection of Cronobacter species in powdered infant formula

Due to the lack of electricity and thermostatic instruments in certain settings for convenient detection of Cronobacter species in powdered infant formula (PIF), a novel investigation was conducted to establish an electricity-free visual detection system for rapid detection of Cronobacter species in PIF. This system included a portable electricity-free heater that could use the exothermic reaction of calcium oxide and water and 3 kinds of phase change materials to supply 3 constant temperatures for immunomagnetic separation, DNA extraction, and loop-mediated isothermal amplification assay. Meanwhile, the amplified reaction combined with hydroxynaphthol blue could achieve rapid visual detection. Primers designed based on the 16S-23S ribosomal RNA internal transcribed spacer were used in loop-mediated isothermal amplification to specifically monitor Cronobacter species, and the detection limit can reach 4.2 × 10² cfu/g in PIF by an electricity-free heater in 2 h 30 min. Moreover, 2 h of pre-enrichment was necessary when the level of the PIF samples with Cronobacter spp. was 10⁰ cfu/g. The stability of the system was evaluated in ambient temperature at 4°C, 25°C, and 37°C. The results suggested that the electricity-free heater can maintain 3 constant temperatures to support different processes. Therefore, this amplification and visual system is applicable for use in many fields for rapid and specific detection of Cronobacter species in PIF.

Multiplex loop-mediated isothermal amplification-based lateral flow dipstick for simultaneous detection of 3 food-borne pathogens in powdered infant formula

In this study, we established a rapid, simple, and sensitive method for visual and point-of-care detection of Salmonella spp., Cronobacter spp., and Staphylococcus aureus in powdered infant formula (PIF) based on multiplex loop-mediated isothermal amplification (mLAMP) combined with lateral flow dipstick (LFD). Three different species-specific target genes, siiA of Salmonella spp., internal transcribed space (ITS) of Cronobacter spp., and nuc of Staph. aureus, were applied in the mLAMP with biotin-, digoxin-, and Texas Red-modified forward inner primers and fluorescein isothiocyanate (FITC)-modified backward inner primers. After mLAMP, a large number of modified amplicons were detected with LFD; one end of the amplicon was conjugated to the anti-FITC antibody on gold nanoparticles and the other end to streptavidin (anti-digoxin or anti-Texas Red antibody) on test lines. Visual inspection of the device relies on the presence of a red band formed by accumulation of sandwich composites. The detection limits of this mLAMP-LFD assay for Salmonella spp., Cronobacter spp., and Staph. aureus in PIF without enrichment were 4.2, 2.6, and 3.4 cfu/g, respectively. The whole method can be completed in less than 1 h. Thus, mLAMP-LFD is a rapid and efficient method for simultaneously detecting Salmonella spp., Cronobacter spp., and Staph. aureus in PIF.

Development of a test kit for visual loop-mediated isothermal amplification of Salmonella in spiked ready-to-eat fruits and vegetables

The purpose of this study was to assemble two types of loop-mediated isothermal amplification (LAMP) kit that have the ability to visually detect Salmonella in ready-to-eat fruits and vegetables. The reaction results were obtained within 20-40 min after addition of DNA and can be discerned by the naked eye or an amplification plot. The stability of the LAMP wet kit was evident after multiple freezing and thawing cycles, and the one-step LAMP lyophilized kit was further evolved to allow ambient temperature transport for deployment in resource-limited settings. The cost-effective wet kit had the ability to detect minimum amounts of 1.8 CFU/ml Salmonella DNA without enrichment, while the sensitivity of the one-step LAMP lyophilized kit was only 9.8 × 10³ CFU/ml. They both have good anti-interference, as they were both able to detect 2.1 × 10² CFU/ml Salmonella mixed with 10⁶ CFU/ml four non-Salmonella strain mixture. Moreover, cucumber and lettuce that were contaminated with an initial inoculation of 1.7 CFU of Salmonella/10 g showed detection within a reaction time of 30 min after 10 h enrichment. The present research setup is a convenient and practical kit for Salmonella rapid detection that has good application prospects in food safety monitoring.

Instrument-Free and Visual Detection of Salmonella Based on Magnetic Nanoparticles and an Antibody Probe Immunosensor

Salmonella, a common foodborne pathogen, causes many cases of foodborne illness and poses a threat to public health worldwide. Immunological detection systems can be combined with nanoparticles to develop sensitive and portable detection technologies for timely screening of Salmonella infections. Here, we developed an antibody-probe-based immuno-N-hydroxysuccinimide (NHS) bead (AIB) system to detect Salmonella. After adding the antibody probe, Salmonella accumulated in the samples on the surfaces of the immuno-NHS beads (INBs), forming a sandwich structure (INB–Salmonella–probes). We demonstrated the utility of our AIB diagnostic system for detecting Salmonella in water, milk, and eggs, with a sensitivity of 9 CFU mL⁻¹ in less than 50 min. The AIB diagnostic system exhibits highly specific detection and no cross-reaction with other similar microbial strains. With no specialized equipment or technical requirements, the AIB diagnostic method can be used for visual, rapid, and point-of-care detection of Salmonella.

Single and multiple detections of foodborne pathogens by gold nanoparticle assays

A late detection of pathogenic microorganisms in food and drinking water has a high potential to cause adverse health impacts in those who have ingested the pathogens. For this reason there is intense interest in developing precise, rapid and sensitive assays that can detect multiple foodborne pathogens. Such assays would be valuable components in the campaign to minimize foodborne illness. Here, we discuss the emerging types of assays based on gold nanoparticles (GNPs) for rapidly diagnosing single or multiple foodborne pathogen infections. Colorimetric and lateral flow assays based on GNPs may be read by the human eye. Refractometric sensors based on a shift in the position of a plasmon resonance absorption peak can be read by the new generation of inexpensive optical spectrometers. Surface-enhanced Raman spectroscopy and the quartz microbalance require slightly more sophisticated equipment but can be very sensitive. A wide range of electrochemical techniques are also under development. Given the range of options provided by GNPs, we confidently expect that some, or all, of these technologies will eventually enter routine use for detecting pathogens in food. This article is categorized under: Diagnostic Tools > Biosensing.

Development of rapid dipstick assay for food pathogens, Salmonella, by optimized parameters

Salmonella is among the very important pathogens threating the human and animal health. Rapid and easy detection of these pathogens is crucial. In this context, antibody (Ab) based lateral flow assays (LFAs) which are simple immunochromatographic point of care test kits were developed by gold nanoparticles (GNPs) as labelling agent for Salmonella detection. For that purpose some critical parameters such as reagent concentrations on the capture zones, conjugate concentrations and ideal membrane type needed for LFAs for whole cell detection were tested for naked eye analysis. Therefore, prepared LFAs were applied to the live and heat inactivated cells when they were used alone or included in different bacterial mixtures. Among the test platforms, membrane 180 (M180) was found as an ideal membrane and 36 nm GNPs showed highly good labelling in the developed LFAs. Diluted conjugates and low concentrations of reagents affected the test signal negatively. Salmonella was detected in different bacterial mixtures, selectively in 4-5 min. The best recognized species by used Ab were S. enteritidis and S. infantis. 5 × 105 S. typhimurium cells were also determined as a limit of detection of this study with mentioned parameters.

Loop-Mediated Isothermal Amplification for Salmonella Detection in Food and Feed: Current Applications and Future Directions

Loop-mediated isothermal amplification (LAMP) has become a powerful alternative to polymerase chain reaction (PCR) for pathogen detection in clinical specimens and food matrices. Nontyphoidal Salmonella is a zoonotic pathogen of significant food and feed safety concern worldwide. The first study employing LAMP for the rapid detection of Salmonella was reported in 2005, 5 years after the invention of the LAMP technology in Japan. This review provides an overview of international efforts in the past decade on the development and application of Salmonella LAMP assays in a wide array of food and feed matrices. Recent progress in assay design, platform development, commercial application, and method validation is reviewed. Future perspectives toward more practical and wider applications of Salmonella LAMP assays in food and feed testing are discussed.