Analysis of anatomical variations of bone and vascular structures around the posterior atlantal arch using three-dimensional computed tomography angiography

Does ponticulus posticus affect vertebral artery diameter

PURPOSE

Ponticulus Posticus, atlantooccipital ligament ossification-induced anomaly, surrounds the vertebral artery and the first cervical nerve root. It is believed to wrap around the first cervical nerve root and the vertebral artery, causing compression. We hypothesized that it would also reduce the diameter of the vertebral artery.

METHODS

Between January 1, 2022, and December 31, 2022, cervical spine CT scans taken for any reason were retrospectively reviewed. The images of 1365 patients suitable for evaluation were evaluated by two expert radiologists in 3 dimensions. Among patients with PP, those who underwent cervical angiography were identified for vertebral artery diameter measurement.

RESULTS

The average age of the 1365 individuals included in the study (732 males, 633 females) was 55.78 (± 18.85) with an age range of 1-96. Among this group, PP was detected in 288 individuals, resulting in a total prevalence of 21.1%. Right and left vertebral artery diameters were significantly lower in patients with complete PP compared to the absent group (p < 0,001, p < 0,001, respectively). Additionally, it was observed that width and height diameters and artery diameters were positively correlated in patients with Complete PP.

CONCLUSIONS

Ponticulus posticus can cause vertebrobasilar insufficiency by reducing the diameter of the vertebral artery. Therefore, imaging and detailed evaluation of this region are important in symptomatic patients.

A Prevalence Anatomic-Imaging Study of the Posterior Inferior Cerebellar Artery's Origin

Background and Objectives: Typically, the vertebral arteries (VAs) enter the posterior fossa through dural rings and further unite, forming the basilar artery. The posterior inferior cerebellar artery (PICA) is usually a branch of the V4 segment of the VA (intradural origin). It may also leave the V3 suboccipital segment of the VA (extradural origin). The transdural origin of the PICA within the VA's dural ring has been consistently overlooked. A study was designed to determine the topographical patterns of the PICA's origin. Materials and Methods: Determinations were performed in a retrospective sample of 225 computed tomography angiograms. Four types of PICA origin were documented: type 0, absent PICA; type 1, the extradural origin of the PICA from the V3 segment of the VA; type 2, the transdural origin of the PICA within the dural ring; and type 3, the intradural origin of the PICA from the V4 segment of the VA. The bilateral symmetry of types was also investigated. Results: Out of 450 VAs, type 0 (absent PICA) was found in 36%, type 1 (extradural) in 0.44%, type 2 (transdural) in 5.56%, and typical type 3 in just 58%. In types 1 and 2, the PICA entered the posterior fossa through the dural ring and the marginal sinus. In the overall group (N = 225), the type combinations 1_1, 1_2 and 1_3 were not found. Bilaterally absent PICAs occurred in 18.67%. The bilateral combinations 0_1/0_2/0_3/2_2/2_3/3_3 were found, respectively, in 0.89%/3.11%/30.67%/1.78%/4.44%/40.44%. Four of the seventy-eight PICAs opposite to an absent one, three intradural and one transdural, were true bihemispheric PICAs. Conclusions: The PICAs with extradural or transdural origins are facultative contents of the dural ring and are at risk during neurosurgical approaches in the foramen magnum. Rare bihemispheric PICAs could originate either intradurally or within the dural ring.

The impact of an anomalous third segment of the vertebral artery on bypass surgery: a case report and literature review

The horizontal part of the third segment (V3) of the vertebral artery (VA) is a critical anastomotic site for bypass procedures involving either donor or recipient vessels. It is rare for the V3 segment to deviate from its typical course of passing through the atlanto-transverse foramen. V3 anomaly encountered in occipital artery (OA)-V3 bypass surgery has not been previously reported. Here, we present a case involving a patient undergoing bypass surgery due to recurrent post-stent occlusion at the first segment (V1) of the left VA. During the operation, it was noted that the V3 horizontal segment could not be identified within the left VA groove, leading to initial suspicion of left V3 disuse atrophy attributed to prolonged chronic ischaemia. Consequently, there was a need to modify the operative method and to transition from an OA-V3 bypass to an OA-posterior inferior cerebellar artery bypass. Post-operative computed tomography angiography confirmed that indeed, the left V3 did not traverse through the transverse foramen of the atlas and instead entered the dural membrane between the first cervical vertebra (C1) and the second cervical vertebra (C2).

Ponticulus posticus and skeletal malocclusion: A pilot study in a Southern Italian pre-orthodontic court

Purpose

Ponticulus posticus (PP) is a bony protrusion located between the posterior portion of the superior articular process and the posterolateral portion of a posterior arch of the atlas vertebrae in the cervical spine. The aim of this study is to verify the presence of different types of PP in a Southern Italian pre-orthodontic cohort to understand its correlation with skeletal class and maturity.

Methods

A case-control retrospective study was conducted, utilizing 212 latero-lateral telecranium radiographs to analyze skeletal maturity according to the cervical vertebral maturation method, the Angle's classification of malocclusion (I, II, or III), and the presence or absence of the PP, whether complete (c-PP) or partial (p-PP). A total of 212 lateral cephalograms were analyzed.

Results

Of the 72 male patients, 67 (93%) exhibited PP, and 116 (88%) were PP. The chi-square value was 0.001, while Cramer's V was 0.270, indicating a significant correlation between age groups and PP presence, and a very strong association overall. Out of the 41 complete PP cases, class I was notably more prevalent than classes II and III.

Conclusion

Orthodontists should carefully consider PP when assessing and treating individuals with or without skeletal discrepancies and dental anomalies.

Bow hunter's syndrome due to an anomalous right vertebral artery origin and contralateral absence: a case report and literature review

BACKGROUND

Bow Hunter's syndrome (BHS), also known as rotational vertebral artery occlusion (RVAO), is a rare condition characterized by dynamic vertebrobasilar insufficiency due to position-dependent occlusion of the vertebral artery (VA). In the existing literature, most cases of BHS are attributed to osteophytic compression originating from the occipital condyle or within the transverse foramen, often accompanied by anatomical abnormalities of the VA. However, cases presenting solely with VA anomalies in the absence of any cervical vertebral structural abnormality are rare. This case report presents a unique instance of BHS in a 56-year-old male, attributed to the anomalous origin of the right VA and the absence of the left VA, without cervical structural abnormalities.

CASE PRESENTATION

The patient exhibited symptoms like episodic dizziness and vertigo, which were exacerbated by rightward head rotation and alleviated upon returning to a neutral position. Diagnostic evaluation, including digital subtraction angiography, revealed that the right VA originated from the right common carotid artery and compression-induced stenosis of the right VA during head rotation. Conservative management, including avoidance of certain head movements and anti-arteriosclerosis medication, led to symptom resolution over a two-year follow-up period.

CONCLUSIONS

This report contributes to the understanding of BHS by highlighting a rare vascular anomaly presentation and incorporates a review of 14 similar case reports in the literature describing that an anatomical abnormality of the VA is mainly responsible for the pathology of BHS in the absence of cervical vertebral anomalies, thus emphasizing the need for careful diagnostic and management strategies.

Unilateral C1-C2 Posterior Fusion in a Patient With Right Vertebral Artery Anomaly With Intracanal Trajectory: A Case Report

CASE

A 59-year-old woman presented with progressively worsening neck pain and radicular symptoms. Cervical radiographs revealed C1-C2 dynamic instability. Magnetic resonance imaging and computed tomographic angiogram revealed an anomalous right vertebral artery with intracanal trajectory at C1. A unilateral left C1-C2 fusion with a C1 lateral mass screw and C2 transarticular screw placement was performed due to the anomalous artery. At 14-month follow-up, the patient's cervical symptoms had resolved.

CONCLUSION

In this patient with an aberrant vertebral artery who was indicated for C1-C2 fusion, a unilateral contralateral fusion with a C1 lateral mass screw and C2 transarticular screw was a satisfactory treatment option.

The transversoclasiotome: a novel instrument for examining the vertebral artery

Opening the foramen transversarium of the cervical vertebrae is necessary for accessing the vertebral vessels. There are no specialist tools for cutting the anterior lamina of the transverse processes, and alternatives lead to questionable results. A novel tool, the transversoclasiotome, is described and tested. The literature and patent databases were systematically reviewed. A blueprint of the transversoclasiotome was created, and the prototype was tested through autopsy on ten fresh-frozen cadavers within our Body Donation Program. The transversoclasiotome consists of two delicate branches mounted as a scissor, one a cutting jaw and the other a knocker with a rounded tip, both angled 30° to the principal axis. The jaws shut, facing each other in parallel. The cutting jaw corresponds to a slit on the knocker profile without protruding beyond it even when entirely closed. It acts by cutting and wedging. The testing autopsies demonstrated its suitability for its purpose, with an adequate response to the pressure exerted on the bone lamina. The section cut cleanly, without sliding off while closing on the bone. The vertebral vessels were not injured either during instrument insertion or cutting. Their morphological features are described. The transversoclasiotome has been proven appropriate for sectioning the anterior lamina of transverse processes of the cervical vertebrae. It meets the needs of clinical anatomy in teaching and training clinicians or surgeons, forensic clinical anatomy during medico-legal investigation, and research.

Perioperative complications associated with fluoroscopy C1 lateral mass screw fixation (Goel technique) versus computed tomography-guided navigation technique: A review of 202 cases from the German Spine Registry (DWG-Register)

Background

Overview of the literature - Fractures of the C1 constitute 3%-13% of all cervical spine injuries in adults. Most isolated C1 fractures are stable and can be treated nonoperatively with external immobilization. Traditional surgical options for C1 fracture treatment are occiput-to-C2 fusion or C1 with lateral mass screws (LMSs). Purpose - The aim is to assess the management and perioperative complications of C1 fractures undergoing LMS fusion between fluoroscopy and computed tomography (CT)-guided navigation.

Methods

This was a retrospective multicenter study of data from the DWG-Register of patients who underwent operative treatment for C1 traumatic fracture with LMSs from January 2017 to September 2022. Inclusion criteria - traumatic injury and age > 18 years old.

Results

In total, 202 patients with traumatic C1 fracture requiring spinal surgery were identified in the registry; n = 175 (Group 1) were treated conventionally without CT-guided navigation and n = 27 were treated with CT-guided navigation (Group 2). C1-LMS was principally performed by spine surgeons n = 90 (53.4%) and n = 72 (18.5%) by neurosurgeons in both the groups. Intraoperative adverse events were as follows: dural tear in group 1 n = 0 and in group 2 n = 1, vascular injury, with one case in group 1 and no cases in group 2. General complications were: cardiovasculars in group 1 n = 6 (3.4%) and Group 2 n = 4 (14.8%) (P = 0.03), pulmonary complications in group1 n = 2 (1.1%) and n = 9 in group 2 (33.3%) (P < 0.001), stroke n = 1 (0.57%) in group1 and n = 4 in group 2 (14.8%) (P < 0.001), gastrointestinal bleeding n = 1 (0.57%) in group1 and no cases in group 2, renal insufficiency n = 2 (1.1%) in group 1 and n = 3 (11.1%) in group 2 (P = 0.01). One death was recorded in group 2 (3.7%).

Conclusion

This series of 404 screws placed in 202 patients over 5 years who underwent two types of C1 fracture fixation had a considerably lower incidence of screw malposition and vertebral artery injury than has previously been reported in the literature. C1 screws can be safely placed with a low risk of vertebral artery and neurologic injury with and without CT-guided navigation support.

C2 Superior Facetal Osteotomy: A Novel Technique in Complex Craniovertebral Junction Surgery for C1 Lateral Mass Screw Placement

Complex craniovertebral junction (CVJ) defects account for a considerable proportion of CVJ diseases. Given the heavily assimilated C1, an unfavorable C1-C2 joint orientation, an overriding C2 superior facet, a low-hanging occiput, and an abnormal vertebral artery course with a high-riding vertebral artery, placement of C1 lateral mass screws might be difficult. To address this, a novel technique for placing C1 lateral mass screws that avoid vertebral artery injury, low-hanging occiput, and overriding C2 superior facet was developed in this study. This approach enables firm fixation of C1-C2 even in difficult situations where the placement of the C1 lateral mass is challenging.

Safety and Efficacy of Intraoperative Doppler Sonography-Assisted Cervical Pedicle Screw Fixation-A Retrospective Comparison with Conventional Pedicle Screw Implantation

STUDY DESIGN

A Retrospective Cohort Study.

OBJECTIVE

To introduce a new Doppler sonography-assisted pedicle screw fixation technique that enables vertebral artery (VA) monitoring during surgery and compares the accuracies of Doppler sonography-assisted cervical pedicle screw fixation and the conventional technique.

METHODS

This retrospective study was performed on 164 consecutive patients that underwent pedicle-based screw fixation from C2 to C6 between January 2013 and August 2020. Surgery was performed without intraoperative Doppler sonography in 84 cases (the Control group) or with intraoperative Doppler sonography in 80 cases (the Doppler group). Proper positioning of pedicle screws was graded, and the incidences of VA injury and screw breach in the Control and Doppler groups were compared.

RESULTS

Three hundred and ninety-nine screws were placed in the 164 patients (Doppler, 186 screws; Control, 213 screws). The percentages of well-positioned screws in the two groups were significantly different (Doppler, 97.8%; Control, 85.0%). There were two cases of VA injury in the Control group, an incidence of 2.4%, but no case in the Doppler group.

CONCLUSION

Doppler sonography can be used intraoperatively to help guide the trajectory of the cervical pedicle screw insertion. It can detect the VA inside the screw trajectory and may reduce the risk of VA injury during cervical pedicle screw fixation.

A comprehensive analysis and literature review of vertebral artery variation in craniovertebral junction using three-dimensional computed tomography angiography

PURPOSE

To describe vertebral artery (VA) variation in patients with or without osseous anomalies at congenital craniovertebral junction (CVJ).

METHODS

In the present study, we retrospectively analyzed 258 patients with VA variation who underwent three-dimensional computed tomography angiography (3D CTA) in our hospital from March 2017 to October 2019.

RESULTS

Among 258 patients, 180 were accompanied by skeleton structural malformation, including 105 cases of occipital ossification of the atlas, 8 cases of the bipartite atlas, 7 cases of hypoplasia of the posterior arch of the atlas, 45 cases of C2/3 congenital fusion, 2 cases of C2/3/4 congenital fusion, and 13 cases of congenital os odontoid. VA variation was divided into type A (VA variation in the CVJ area without osseous anomalies) and type B (VA variation in the CVJ area with osseous anomalies). There are totally 10 subtypes, including type A1 (atlas occipitalization with VA entrance approach close to middle line, 20.2%); type A2 (atlas occipitalization with VA entrance approach far from middle line, 30.2%); type A3 (first intersegmental VA in C1-C2, 1.9%); type A4 (fenestration of the VA, 2.3%); type A5 (VA bulging type, 6.6%); type A6 (VA exposures with the absence of the posterior atlas arch, 2.3%); type A7 (C2 inner wall type, 0.4%); type A8 (single vertebral artery, 2.3%); type B1 (posterior ponticuli, 2.7%); and type B2 (high-riding VA, 31.4%).

CONCLUSION

This study is expected to take the lead in the most comprehensive classification of VA variation.

Treatment of irreducible atlantoaxial dislocation by bony deformity osteotomy, remodeling, releasing, and plate fixating through transoral approach

OBJECTIVE

Investigate a novel method for treating irreducible atlantoaxial dislocation (IAAD) or with basilar invagination (BI) by bony deformity osteotomy, remodeling, releasing, and plate fixating through transoral approach.

METHOD

From March 2015 to December 2019, 213 consecutive patients diagnosed as IAAD/BI were treated with transoral bony deformity remodeling and releasing combined with plate fixation. The main clinical symptoms include neck pain, headache, numbness of the limbs, weakness, unstable walking, inflexible hand-held objects, and sphincter dysfunction. The bony factors that impact reduction were divided into as follows: type A1 (sloping of upper facet joint in C2), type A2 (osteophyte in lateral mass joints between C1 and C2), type A3 (ball-and-socket deformity of lateral mass joint), type A4 (vertical interlocking between lateral mass joints of C1-C2), type A5 (regional bone fusion in lateral mass joints), type B1 (bony factor hindering reduction between the atlas-dens gap), type B2 (uncinate odontoid deformity), and type B3 (hypertrophic odontoid deformity). All of them were treated with bony deformity osteotomy, remodeling, and releasing techs.

RESULT

The operation time was 144 [Formula: see text] 25 min with blood loss of 102 [Formula: see text] 35 ml. The average pre-operative ADI improved from 7.5 [Formula: see text] 3.2 mm pre-surgery to 2.5 [Formula: see text] 1.5 mm post-surgery (p < 0.05). The average VDI improved from 12.3 [Formula: see text] 4.8 mm pre-surgery to 3.3 [Formula: see text] 2.1 mm post-surgery (p < 0.05). The average pre-operative CMA improved from 115 [Formula: see text] 25° pre-surgery to 158 [Formula: see text] 21° post-surgery (p < 0.05); the pre-operative CAA changed from 101 [Formula: see text] 28° pre-surgery to 141 [Formula: see text] 10° post-surgery. After the operation, the clinic symptoms improved, and the JOA score improved from 9.3 [Formula: see text] 2.8 pre-operatively to 13.8 [Formula: see text] 2.5 in the sixth months of follow-up.

CONCLUSION

In addition to soft tissue factors, bony obstruction was another important factor impeding atlantoaxial reduction. Transoral bony deformity osteotomy, remodeling, releasing combined with plate fixating was effective in treating IAAD/BI with bony obstruction factors.

Surgical, Clinical, and Radiological Outcomes Analysis of Craniovertebral Junction Anomalies Cases: An Institutional Experience

Objective  The aim of this study was to evaluate the clinical and radiological outcomes analysis of craniovertebral junction (CVJ) anomalies cases. Materials and Methods  Retrospective analysis of 43 CVJ anomalies cases, which were surgically managed at Uttar Pradesh University of Medical Sciences, Saifai, Etawah, Uttar Pradesh, India, from period between June 2015 and June 2019. They were analyzed for age, sex, clinical characteristics, radiological diagnosis, and treatment given. Patient's clinical and radiological status was assessed pre- and postoperatively during time of discharge and at 6 months of follow-up. For clinical assessment we used visual analogue scale (VAS) and Nurick grading system. Radiological assessment was done by atlantodental interval (ADI), craniobasal angle, and craniometric lines. Overall outcomes were depicted as favorable, stabilized, and mortality at 6 to 18 months (mean 12.69 ± 3.77) of follow-up. Results  The age range of our cases was 7 to 71 years (mean 29.93 ± 17.39). Male-to-female ratio was 2.91:1. Majority of the cases were presented with neck pain ( n  = 38; 88.37%), motor weakness ( n  = 35; 81.40%), and sensory deficits ( n  = 25; 58.14%). Congenital atlantoaxial dislocation ( n  = 31; 72.09) was the most common CVJ anomaly. Clinically, there were significant improvements in VAS ( p  = 0.001) and Nurick grade ( p  = 0.007) postoperatively. Radiologically, ADI ( p  = 0.003) had decreased, clivus canal angle ( p  = 0.005) become less acute, and odontoid process ( p  = 0.003 for McRae's line) goes downwards in postoperative period. Bony fusion was achieved in 41 (95.35%) cases. Out of 43, 73% cases had favorable outcomes, 21% were stabilized, and mortality was seen in 2.33% cases at 6 months (mean ± standard deviation = 12.69 ± 3.77) of follow-up. Conclusion  Proper preoperative evaluation and selection of individualized surgical technique was the key for excellent clinical and radiological outcomes with minimal complications.

Bilateral persistent intersegmental artery in a patient with posterior atlantoaxial subluxation after subaxial cervical laminoplasty

INTRODUCTION AND IMPORTANCE

To summarize the clinical manifestations and treatment of bilateral persistent first intersegmental artery (PFIA) in a patient with posterior subluxation of atlantoaxial joint.

CASE PRESENTATION

A-85-year-old woman with a two-months history of aggravating of gait disturbance and finger clumsiness was referred to our hospital. Magnetic resonance imaging revealed posterior subluxation of the atlantoaxial joint and spinal cord compression at C1 level. Three-dimensional computed tomography angiography (CTA) of cervical spine showed bilateral PFIA and left side high-riding VA. Because of the high risk of vertebral artery injury with posterior arch resection and lateral mass screw insertion due to the presence of PFIA, as well as the bony fragility of the cervical spine and the fact that the posterior atlantoaxial subluxation was reduced in the flexed position, the posterior occipito-thoracic fixation without posterior arch resection in the mildly flexed cervical position was underwent. The postoperative course was uneventful and her neurological symptoms improved gradually after surgery.

CLINICAL DISCUSSION

PFIA is a very rare condition representing between 0.01 % and 1.8 %. Most patients with this condition have a unilateral persistent segmental artery, but in a small minority of cases it occurs bilaterally. It may be more difficult to resect of posterior arch or insert the C1 lateral mass screw in cases of PFIA.

CONCLUSION

The best way to avoid IVAI may be careful examining the abnormal running of VA preoperatively especially on 3D-CT of cervical spine with arteriography and not to choose a technique with a high risk of VA injury.

How I do it: lateral approach for craniocervical junction tumors

BACKGROUND

The far lateral approach has been developed to access lesions at the craniocervical junction and upper cervical spinal canal. Associated morbidity triggered the development of less invasive tailored approaches.

METHOD

In this lateral approach to the craniocervical junction, the occipital condyle is kept intact, vertebral artery manipulation is minimized, and the sigmoid sinus is not skeletonized. A linear incision through skin and muscles and use of an abdominal wall fat graft minimize the risk of cerebrospinal fluid leakage.

CONCLUSIONS

The exposure provided is sufficient for the majority of tumors in this region and allows for low complication rates.

Posterior atlantoaxial internal fixation using Harms technique assisted by 3D-based navigation robot for treatment of atlantoaxial instability

BACKGROUND

To evaluate the accuracy of screw placement using the TiRobot surgical robot in the Harms procedure and to assess the clinical outcomes of this technique.

METHODS

This retrospective study included 21 patients with atlantoaxial instability treated by posterior atlantoaxial internal fixation (Harms procedure) using the TiRobot surgical robot between March 2016 and June 2021. The precision of screw placement, perioperative parameters and clinical outcomes were recorded. Screw placement was assessed based on intraoperative guiding pin accuracy measurements on intraoperative C-arm cone-beam computed tomography (CT) images using overlay technology and the incidence of screw encroachment identified on CT images.

RESULTS

Among the 21 patients, the mean age was 44.8 years, and the causes of atlantoaxial instability were os odontoideum (n = 11), rheumatoid arthritis (n = 2), unknown pathogenesis (n = 3), and type II odontoid fracture (n = 5). A total of 82 screws were inserted with robotic assistance. From intraoperative guiding pin accuracy measurements, the average translational and angular deviations were 1.52 ± 0.35 mm (range 1.14-2.25 mm) and 2.25° ± 0.45° (range 1.73°-3.20º), respectively. Screw placement was graded as A for 80.5% of screws, B for 15.9%, and C for 3.7%. No complications related to screw misplacement were observed. After the 1-year follow-up, all patients with a neurological deficit experienced neurological improvement based on Nurick Myelopathy Scale scores, and all patients with preoperative neck pain reported improvement based on Visual Analog Scale scores.

CONCLUSIONS

Posterior atlantoaxial internal fixation using the Harms technique assisted by a 3D-based navigation robot is safe, accurate, and effective for treating atlantoaxial instability.

Salvage posterior atlantoaxial fixation techniques: A retrospective study

OBJECT

Since the atlantoaxial region have critical neurovascular anatomy and limited bone surface for fusion, the application and choice of salvage fixation techniques are highly important. To discuss alternative posterior atlantoaxial fixation surgery techniques.

METHODS

We retrospectively surgical records of 22 patients that posterior atlantoaxial fixation techniques were applied.

RESULTS

The patients included 11 males and 11 females (mean age: 65.7 years). The fracture type that caused instability is type 2 odontoid fractures (22). In six of these patients alternative stabilization techniques were applied due to anatomical variations, huge venous bleeding and iatrogenic trauma of the screw entry points during surgery.

CONCLUSIONS

Owing to anatomical variations, intraoperative challenges, and/or instrumentation failures, performing alternative surgical fixation technique is an important factor that affects the success of stabilization of the atlantoaxial region. Knowledge of salvage techniques especially during the learning curve is vitally important. Surgeons should adapt to intraoperative surgical challenges as required.

Accuracy and Safety of Robot-Assisted versus Fluoroscopy-Guided Posterior C1 Lateral Mass and C2 Pedicle Screw Internal Fixation for Atlantoaxial Dislocation: A Preliminary Study

Objective

To compare the accuracy, efficiency, and safety of robotic assistance (RA) and conventional fluoroscopy guidance for the placement of C1 lateral mass and C2 pedicle screws in posterior atlantoaxial fusion.

Methods

The data of patients who underwent posterior C1–C2 screw fixation (Goel-Harm's technique) in our hospital from August 2014 to March 2021 were retrospectively evaluated, including 14 cases under fluoroscopic guidance and 11 cases under RA. The hospital records, radiographic results, surgical data, and follow-up records were reviewed. Accuracy of screw placement was assessed using the Gertzbein and Robbins scale, and clinical outcomes were evaluated by Japanese Orthopedic Association (JOA) score, visual analogue scale (VAS), modified MacNab criteria, and postoperative complications.

Results

Baseline characteristics of both groups were similar. The mean estimated blood loss in the fluoroscopic guidance and RA groups was 205.7 ± 80.3 mL and 120.9 ± 31.9 mL, respectively (p = 0.03). The mean surgical duration was 34 min longer with RA compared to that performed with free-hand (FH) method (p = 0.15). In addition, lower intraoperative radiation exposure was detected in the RA group (12.4 ± 1.4 mGy/screw) versus the FH (19.9 ± 2.1 mGy/screw) group (p = 0.01). The proportion of “clinically acceptable” screws (graded 0 and I) was higher in the RA group (93.2%) than that in the FH group (87.5%, p = 0.04). There was no significant difference in the increase of JOA score and decrease of VAS score between the two surgical procedures. Furthermore, there were no significant differences in overall clinical outcome between the two groups and no neurovascular complications associated with screw insertion.

Conclusions

RA is a safe and potentially more accurate alternative to the conventional fluoroscopic-guided FH technique for posterior atlantoaxial internal fixation.

Posterior Surgery in the Treatment of Craniovertebral Junction Deformity with Torticollis

OBJECTIVE

To investigate the clinical effect of posterior surgery in the treatment of craniovertebral junction (CVJ) deformities with torticollis and methods for preventing and treating complications in order to obtain a reasonable treatment strategy.

METHODS

From January 2007 to December 2017, 78 patients who suffered from CVJ deformities with torticollis treated by posterior surgery were analyzed. The surgical techniques were all posterior correction and fusion to restore the anatomical alignment of the craniovertebral junction. The visual analog score (VAS) and Short Form-36 (SF-36) health survey questionnaire were utilized to evaluate preoperative and postoperative neck pain, and changes in the torticollis angle and atlas-dens interval (ADI) were evaluated through anteroposterior X-ray and computed tomography. Intra- and postoperative complications were all recorded. One-way ANOVA, LSD-t test, and χ² test were performed to evaluate the difference between the preoperative and postoperative data.

RESULTS

The mean follow-up time was 37.4 ± 15.7 months, the average operation time was 115.6 ± 12.8 min, and the average blood loss was 170.8 ± 26.3 mL. According to the deformity site, the range of posterior correction and fusion was as follows: 38 cases of C₁ -C₂ , 33 cases of C₀ -C₂ , and seven cases of C₀ -C₃ . The preoperative SF-36, VAS, torticollis angle, and ADI were 42.6 ± 8.8, 4.8 ± 1.1, 37.2 ± 11.2°, and 4.9 ± 2.3 mm, respectively. The difference was significant at 3 months post operation (p < 0.05), and there was no significant difference at the final follow-up compared with 3 months post operation (p > 0.05).

CONCLUSION

It can objectively achieve favorable correction and satisfactory clinical effects under posterior correction and fixation for CVJ deformities with torticollis. Intra- and postoperative complications can be settled by proper management.

Research Progress of Ponticulus Posticus: A Narrative Literature Review

Study Design

Narrative review.

Objective

The purpose of this review was to consolidate the current literature related to ponticulus posticus (PP) and to improve the systematic understanding of this anatomical variant of atlas among spine surgeons.

Methods

Articles reviewed were searched in PubMed, Ovid MEDLINE, and Embase. All articles of any study design discussing on PP were considered for inclusion. Two independent authors read article titles and abstracts and included appropriate articles. The relevant articles were studied in full text.

Results

A total of 113 literatures were reviewed and consolidated in this narrative review. These articles are roughly divided into the following five subcategories: (1) epidemiology, (2) pathology and anatomy, (3) clinical presentation, (4) surgical significance, and (5) radiographic examination.

Conclusion

The PP is non-negligible with a high prevalence. The PP compresses the V3 segment of the artery, the suboccipital nerve, and the venous plexus, consequently contributing to the incidence of neurological pathologies. When a PP is observed or suspected on a lateral radiograph, we recommend that a computed tomography (CT) scan of a patient who is about to receive a C1 lateral mass screw (C1LMS) should be performed, which could determine a safe entry point and the right trajectory of screw insertion.

The association between atlantoaxial instability and anomalies of vertebral artery and axis

BACKGROUND CONTEXT

A screw-rod system is the most widely used technique for atlantoaxial instability (AAI). However, neglecting anomalies of the vertebral artery and axis could lead to fatal complications. Whether or not the presence of AAI is associated with a more complicated anatomy for instrumentation is unclear.

PURPOSE

To analyze the association between AAI and anomalies of the vertebral artery and axis in patients with and without AAI.

STUDY DESIGN

A retrospective comparative study.

PATIENT SAMPLE

One hundred and twenty patients who underwent preoperative 3-dimensional computed tomography with vertebral angiography of the cervical spine at our institution from 2012 to 2020.

OUTCOME MEASURES

The C2 isthmus height, internal height of the C2 lateral mass, and C2 pedicle width were radiologically assessed.

METHODS

A case control study with matched cohort analysis was conducted. One hundred and twenty patients were divided into 2 groups according to presence of AAI, and the presence of high-riding vertebral artery (HRVA) and a narrow pedicle for insertion of the C2 pedicle screw was assessed, as was the prevalence of extraosseous vertebral artery anomaly.

RESULTS

The C2 isthmus height, C2 internal height, and C2 pedicle width were significantly narrower in the AAI group (p<.01, <.01, and <.01, respectively). A significantly greater proportion of patients with AAI had HRVA and a narrow pedicle than those without (p<.01 and < 0.01, respectively). Among patients with AAI, the C2 internal height was significantly narrower in patients with rheumatoid arthritis (p<.01). Five patients (8.3%) with AAI had vertebral artery anomaly (3 fenestration, 2 persistent first intersegmental artery), while there were no vertebral artery anomalies in patients without AAI (p<.01).

CONCLUSIONS

Vertebral artery anomalies are more common in patients with AAI. Furthermore, posterior instrumentation in patients with AAI has a narrower safe zone compared to that in patients without AAI, which may be caused by a long-lasting deformity rather than a congenital deformity. Therefore, more thorough preoperative evaluation of the anatomy should be performed in these patients.

Vertebral Artery Variations at the Craniovertebral Junction in "Sandwich" Atlantoaxial Dislocation Patients

Objective

To summarize the vertebral artery (VA) pattern of 96 “sandwich” atlantoaxial dislocation (AAD) patients and to describe the strategies of reducing the injury of VA during surgery.

Methods

From 2009 to 2020, we retrospectively reviewed the 3-dimensional computed tomography angiography data of 96 AAD patients combined with atlas occipitalization and C2–3 fusion, which were diagnosed as “sandwich” AAD and 96 patients as control group patients who were without atlas occipitalization, C2–3 fusion and any other cervical bone deformity at our institution. The variations of each side of VA were described in 3 different parts (C0–1, C1–2, and C2–3) according to the characteristics of the 3-part pathological structures in “sandwich” subgroup.

Results

One hundred ninety-two sides of VAs in every group of patients were analyzed and every VA was described separately at 3 different level regions. There were different variations in these 3 different regions: 4 variations in the upper fusion region, 5 variations in the sandwiched region, and 6 variations in the lower fusion region in sandwich AAD patients. And the rate of VA deformity in sandwich AAD patients was much higher and more types of VA variations existed.

Conclusion

In “sandwich” AAD patients, deformities of vertebral arteries in craniovertebral junction are more common, and the same VA may have deformities at different levels that severely affect surgical procedures. Therefore, preoperative imaging examination of VA for “sandwich” AAD patients is vital of guiding surgeons to avoid injury of VA during surgery.

Assessments of Prevalence of Ponticulus Posticus, Atlas Posterior Arch Deficiency, Sella Turcica Bridging, Maxillary Canine Impaction, and Associations Among Them in 500 CBCTs of Italian Orthodontic Patients

Background: The ponticulus posticus (PP) is an important anomaly of the atlas (C1 vertebra) with a complete or partial bone bridge that transforms the groove of the vertebral artery (VA) into a canal (arcuate foramen). The aim was to retrospectively determine prevalence of PP evaluating morphological features and the possible association with other dentoskeletal anomalies in the midface and neck area such as maxillary canine impaction (MCI), atlas posterior arch deficiency (APAD), and sella turcica bridging (SB).

Methods: This study was conducted in the Department of Medical, Oral and Biotechnological Sciences of the University “G. D'Annunzio” in Chieti. The detection of PP was performed on 500 patients with cone beam CT (CBCT) images (6 to 87 years).

Results: Analysis revealed the presence of uni- and bi-lateral PP in 110 patients (22%): 24 (4.8%) patients with bilateral complete PP, 12 (2.4%) patients with complete PP on the left, 6 (1.2%) patients with complete PP on the right, 8 (1.6%) patients with complete PP on the right and partial PP on the left, 6 (1.2%) patients with complete PP on the left and partial PP on the right, 26 (5.2%) patients with partial bilateral PP, 18 (3.6%) patients with partial left PP, and 10 (2%) patients with partial PP on the right. The Chi-squared statistic confirmed that there are significant associations between MCI and PP (p = 0.020) and between SB and MCI (p &lt;0.00001). No correlation between chronological age and presence of the PP (p = 0.982), between chronological age and morphotypes of the PP (p = 0.779), between APAD and the PP (p = 0.0757), between SB and the PP (p = 0.111), and between APAD and MCI (p = 0.222) were found.

Conclusion: This observational study showed how bilateral partial variant and bilateral complete variant are the most represented morphotypes in all the age groups. The prevalence of MCI is positively associated with PP and with SB.

The craniovertebral junction, between osseous variants and abnormalities: insight from a paleo-osteological study

The bony components of the craniovertebral junction (CVJ) have been investigated in 172 skeletons, dug up from several archaeological sites, to define the frequency of developmental dysmorphisms, and to acquire qualitative and quantitative data about their morphology. A review of the pertinent literature is also presented. Twenty-five individuals (14.5%) exhibited at least one dysmorphism, which ranged from a condition of simple variant to a true malformation. Four individuals presented two or more anomalies at the same time (2.3% of the whole sample, 16% of the affected individuals). The most frequently observed abnormalities were: (i) the presence of a complete bony bridge in the atlas, forming a canal surrounding the vertebral artery (arcuate foramen, supertransverse foramen, and the simultaneous occurrence of arcuate foramen and supertransverse foramen); (ii) the presence of basilar processes. Basilar processes displayed a great variety in shape and dimension. They also differed with respect to their relationship with atlas and axis. The less frequently detected anomalies were: (i) complete absence of the posterior arch of C1, (ii) fusion of C2 and C3, and (iii) irregular segmentation of C2. A broad array of structural defects has been described at the CVJ. They may occur either isolated or as part of complex multisystem syndromes. Although harmless in many cases, they can notwithstanding cause severe, even life-threatening complications. When unrecognized, they may generate trouble during surgery. Hence, accurate knowledge of CVJ arrangement, including its multifarious variations, is a critical issue for radiologists, clinicians, surgeons, and chiropractors.

Prevalence of Vertebral artery anomaly in upper cervical and its surgical implications: a systematic review

BACKGROUND

The presence vertebral artery (VA) abnormalities in the upper cervical may be a potential cause of catastrophic complication in the posterior approach of the upper cervical spine surgery. The aim of this study was to demonstrate the real incidence of the V3 segment anomaly in patients who need upper cervical surgery, and tried to find out the risk factors of V3 segment anomaly to evaluate the necessary of computed tomographic angiography (CTA) for upper cervical surgery.

METHOD

This systematic review was conducted following the preferred reporting items for systematic reviews and meta-Analyses (PRISMA). Retrospective studies and reports of case series involving human subjects with data on anomalies of vertebral artery in upper cervical spine were included. Data on the prevalence of persistent first intersegmental artery (PIA), fenestration of the VA (FA), posterior inferior cerebellar artery (PICA) were extracted.

RESULTS

A total of 16 articles involving 5927 subjects met the inclusion criteria. The total incidence of V3 segment anomaly in the patients with bony abnormalities was 25.9% (74/286): PIA was 17.5%, FA was 6.6% and PICA was 1.8%. The total incidence of V3 segment anomaly in the patients without bony abnormalities was 2.7% (152/5671): PIA was 1.76%, FA was 0.4% and PICA was 0.5%. The total incidence of V3 segment anomaly in Asian population without bony abnormalities was 5.8%, while in European and American population was 0.8 and 0.6%, respectively.

CONCLUSION

Patients with bone abnormalities are high risk factor for VA abnormalities, CTA is of paramount importance to evaluate the variant VA anatomy. However, regarding to the low incidence of V3 variation in normal population, we do not recommend preoperative CT angiography as mandatory part of preoperative.

Atlanto-axial rotary instability (Fielding type 1): characteristic clinical and radiological findings, and treatment outcomes following alignment, fusion, and stabilization

Atlanto-axial instability (AAI) is common in the connective tissue disorders, such as rheumatoid arthritis, and increasingly recognized in the heritable disorders of Stickler, Loeys-Dietz, Marfan, Morquio, and Ehlers-Danlos (EDS) syndromes, where it typically presents as a rotary subluxation due to incompetence of the alar ligament. This retrospective, IRB-approved study examines 20 subjects with Fielding type 1 rotary subluxation, characterized by anterior subluxation of the facet on one side, with a normal atlanto-dental interval. Subjects diagnosed with a heritable connective tissue disorder, and AAI had failed non-operative treatment and presented with severe headache, neck pain, and characteristic neurological findings. Subjects underwent a modified Goel-Harms posterior C1-C2 screw fixation and fusion without complication. At 15 months, two subjects underwent reoperation following a fall (one) and occipito-atlantal instability (one). Patients reported improvement in the frequency or severity of neck pain (P < 0.001), numbness in the hands and lower extremities (P = 0.001), headaches, pre-syncope, and lightheadedness (all P < 0.01), vertigo and arm weakness (both P = 0.01), and syncope, nausea, joint pain, and exercise tolerance (all P < 0.05). The diagnosis of Fielding type 1 AAI requires directed investigation with dynamic imaging. Alignment and stabilization is associated with improvement of pain, syncopal and near-syncopal episodes, sensorimotor function, and exercise tolerance.

First reported use of real-time intraoperative computed tomography angiography image registration using the Machine-vision Image Guided Surgery system: illustrative case

BACKGROUND

Vertebral artery injury is a devastating potential complication of C1–2 posterior fusion. Intraoperative navigation can reduce the risk of neurovascular complications and improve screw placement accuracy. However, the use of intraoperative computed tomography (CT) increases radiation exposure and operative time, and it is unable to image vascular structures. The Machine-vision Image Guided Surgery (MvIGS) system uses optical topographic imaging and machine vision software to rapidly register using preoperative imaging. The authors presented the first report of intraoperative navigation with MvIGS registered using a preoperative CT angiogram (CTA) during C1–2 posterior fusion.

OBSERVATIONS

MvIGS can register in seconds, minimizing operative time with no additional radiation exposure. Furthermore, surgeons can better adjust for abnormal vertebral artery anatomy and increase procedure safety.

LESSONS

CTA-guided navigation generated a three-dimensional reconstruction of cervical spine anatomy that assisted surgeons during the procedure. Although further study is needed, the use of intraoperative MvIGS may reduce the risk of vertebral artery injury during C1–2 posterior fusion.

Double-trajectory lumbar screw placement guided by a set of 3D-printed surgical guide templates: a cadaver study

Background

To improve the strength of posterior spine fixation in patients with osteoporosis, some scholars have proposed a method of simultaneously inserting traditional pedicle screws and cortical bone trajectory screws into the pedicle. However, due to the difficulty of the operation and few clinical applications, the safety and accuracy of this method are still unclear. The purpose of this study was to investigate the safety and accuracy of double-trajectory lumbar screw placement guided by surgical guide templates.

Methods

Six wet lumbar specimens were selected for computed tomography (CT) scanning, a three-dimensional (3D) model of the lumbar spine was established using computer software, and surgical guide templates for double-trajectory [traditional pedicle trajectory (TPT) and cortical bone trajectory (CBT)] lumbar screw placement at various segments of the lumbar spine were designed and printed using a 3D printer. Screw placement was guided only by the surgical guide template, with no fluoroscopy. Postoperative CT examination was performed to determine whether the screw penetrated the screw path and the location and depth of penetration of the cortex. The preoperative and postoperative sagittal and axial angles of CBT screws or TPT screws were also measured and compared.

Results

Four screws were placed in each vertebral body of six lumbar specimens for a total of 120 screws. Screw grades: 99 screws as grade 0, 15 as grade 1, six as grade 2, and zero as grade 3. Thus, grade 0 accounted for 82.5% of the screws. No significant differences in the preoperative and postoperative angles of the screws were found (P > 0.05).

Conclusions

3D-printed surgical guide templates for double-trajectory screw placement can reduce the difficulty of surgery and the use of intraoperative fluoroscopy. Using such templates is a safe, feasible, and accurate screw placement method.

Multiple Fractures of Cervical Vertebrae Combined with Arcuate Foramen and Vertebral Artery Occlusion: A Case Report and Literature Review

BACKGROUND

The arcuate foramen is a complete or partial bony bridge over the vertebral artery groove of atlas. The mechanism of the arcuate foramen is not clearly understood. Omission of the arcuate foramen sometimes causes lethal iatrogenic injury during spinal surgery.

CASE PRESENTATION

We describe a patient who was diagnosed with multiple fractures of the cervical vertebrae, arcuate foramen, and right vertebral artery occlusion based on clinical and radiological exams. After conservative treatment, he resumed a normal and productive life.

CONCLUSIONS

Arcuate foramen is a common variation that causes symptoms such as dizziness, headache, and migraine. If the patient does not develop severe symptoms, conservative treatment can achieve very good results without the necessity to remove the bone bridge. When serious symptoms occur, surgical treatment to resect the bony ridges can relieve the symptoms dramatically.

Vertebral Artery Injury in the Cervical Spine: Anatomy, Diagnosis, and Management

»

Although rare, injury to the vertebral artery (VA) can occur after blunt trauma or iatrogenically during surgery. Clinicians should be aware of the anatomic variants of the VA, the presence of which may increase the risk of iatrogenic VA injury (VAI).

»

If VAI is suspected following blunt trauma, rapid identification via advanced imaging modalities, such as computed tomography angiography, can help clarify the site of injury and guide management.

»

VAI can be classified according to the Denver grading scale for blunt cerebrovascular injury, ranging from grade I to grade V, which includes intimal narrowing, pseudoaneurysm formation, complete occlusion, and arterial transection.

»

Treatment modalities remain controversial and include anticoagulation, endovascular interventions, surgical tamponade, ligation, and microvascular repair. The choice of treatment is influenced by the setting of the injury (iatrogenic injury in the operating room versus blunt trauma in the field) and the laterality of the dominant VA with respect to brain perfusion.

Intraoperative surveillance of the vertebral artery using indocyanine green angiography and Doppler sonography in craniovertebral junction surgeries

OBJECTIVE

The authors sought to evaluate the usefulness of indocyanine green (ICG) angiography and Doppler sonography for monitoring the vertebral artery (VA) during craniovertebral junction (CVJ) surgery and compare the incidence of VA injury (VAI) between the groups with and without the monitoring of VA using ICG angiography and Doppler sonography.

METHODS

In total, 344 consecutive patients enrolled who underwent CVJ surgery. Surgery was performed without intraoperative VA monitoring tools in 262 cases (control group) and with VA monitoring tools in 82 cases (monitoring group). The authors compared the incidence of VAI between groups. The procedure times of ICG angiography, change of VA flow velocity measured by Doppler sonography, and complication were investigated.

RESULTS

There were 4 VAI cases in the control group, and the incidence of VAI was 1.5%. Meanwhile, there were no VAI cases in the monitoring group. The procedure time of ICG angiography was less than 5 minutes (mean [± SD] 4.6 ± 2.1 minutes) and VA flow velocity was 11.2 ± 4.5 cm/sec. There were several cases in which the surgical method had to be changed depending on the VA monitoring. The combined use of ICG angiography and Doppler sonography was useful not only to monitor VA patency but also to assess the quality of blood flow during CVJ surgery, especially in the high-risk group of patients.

CONCLUSIONS

The combined use of ICG angiography and Doppler sonography enables real-time intraoperative monitoring of the VA by detecting blood flow and flow velocity. As the arteries get closer, they provide auditory and visual feedback to the surgeon. This real-time image guidance could be a useful tool, especially for high-risk patients and inexperienced surgeons, to avoid iatrogenic VAI during any CVJ surgery.

Atlantoaxial dislocation with congenital "sandwich fusion" in the craniovertebral junction: a retrospective case series of 70 patients

BACKGROUND

In the setting of congenital C1 occipitalization and C2-3 fusion, significant strain is placed on the atlantoaxial joint. Vertebral fusion both above and below the atlantoaxial joint (i.e., a "sandwich") creates substantial instability. We retrospectively report on a case series of "sandwich fusion" atlantoaxial dislocation (AAD), describing the associated clinical characteristics and detailing surgical treatment. To the best of our knowledge, the present study is the largest investigation to date of this congenital subgroup of AAD.

METHODS

Seventy consecutive patients with sandwich fusion AAD, from one senior surgeon, were retrospectively reviewed. The clinical features and the surgical treatment results were assessed using descriptive statistics. No funding sources or potential conflict of interest-associated biases exist.

RESULTS

The mean patient age was 42.2 years (range: 5-77 years); 36 patients were male, and 34 were female. Fifty-eight patients (82.9%) had myelopathy, with Japanese Orthopaedic Association (JOA) scores ranging 4-16 (mean: 12.9). Cranial neuropathy was involved in 10 cases (14.3%). The most common presentation age group was 31 to 40 years (24 cases, 34.3%). Radiological findings revealed brainstem and/or cervical-medullar compression (58 cases, 82.9%), syringomyelia (16 cases, 22.9%), Chiari malformation (12 cases, 17.1%), cervical spinal stenosis (10 cases, 14.3%), high scapula deformity (1 case, 1.4%), os odontoideum (1 case, 1.4%), and dysplasia of the atlas (1 case, 1.4%). Computed tomography angiography was performed in 27 cases, and vertebral artery (VA) anomalies were identified in 14 cases (51.9%). All 70 patients underwent surgical treatment, without spinal cord or VA injury. Four patients (5.7%) suffered complications, including 1 wound infection, 1 screw loosening, and 2 cases of bulbar paralysis. In the 58 patients with myelopathy, the mean JOA score increased from 12.9 to 14.5. The average follow-up time was 50.5 months (range: 24-120 months). All 70 cases achieved solid atlantoaxial fusion at the final follow-up.

CONCLUSIONS

Sandwich fusion AAD, a unique subgroup of AAD, has distinctive clinical features and associated malformations such as cervical-medullar compression, syringomyelia, and VA anomalies. Surgical treatment of AAD was associated with myelopathy improvement and minimal complication occurrence.

CT angiographic evaluation of the V3 vertebral artery course in cases of occipitalized atlas, a study of 25 cases

OBJECTIVES

To study the relationship of the 3rd segment of the vertebral artery to the posterior arch of the atlas in patients with occipitalized atlas, using CT angiography.

METHODS

A retrospective study of 25 cases with complete or partially occipitalized atlas who underwent CT angiography evaluation. Fifty vertebral arteries were analyzed in relation to the respective/related half of the posterior arch of the atlas.

RESULTS

Out of 50 vertebral arteries, 35 (70%) were anomalous; 31 (62%) traversed though bony canal between the fused occiput and atlas, and 4 (8%) coursed between C1 and C2 (C2 segmental type of vertebral artery). Except one, all anomalous vertebral arteries were associated with a fused corresponding side of posterior arch of atlas.

CONCLUSION

The V3 portion of the vertebral artery assumes an anomalous course at the craniovertebral junction in most cases of occipitalized atlas, and this is strongly determined by the fusion status of the posterior arch of the atlas. Aberrations in its course are still seen despite expectations based on this fusion status. Preprocedural CT Angiography provides accurate information of its course to prevent iatrogenic VA injuries.

ADVANCES IN KNOWLEDGE

CT Angiography should be performed before any procedures at the craniovertebral junction in cases of occipitalized atlas to prevent iatrogenic, potentially catastrophic injuries to vertebral artery due to its anomalous course in most of these cases. There are very few such studies in the literature, none in radiology literature. We also describe some rare cases, including a case never described in any literature.

Comparative anatomy and 3D geometric morphometrics of the El Sidrón atlases (C1)

The first cervical vertebra (atlas, C1) is an important element of the vertebral column because it connects the cranial base with the cervical column, thus helping to maintain head posture and contributing to neck mobility. However, few atlases are preserved in the fossil record because of the fragility of this vertebra. Consequently, only eight well-preserved atlases from adult Neandertals have been recovered and described. Here, we present nine new atlas remains from the El Sidrón Neandertal site (Asturias, Spain), two of which (SD-1643 and SD-1605/1595) are sufficiently well preserved to allow for a detailed comparative and three-dimensional geometric morphometric analysis. We compared standard linear measurements of SD-1643 and SD-1605/1595 with those of other Neandertal atlases and carried out three-dimensional geometric morphometric analyses to compare size and shape of SD-1643 and SD-1605/1595 with those of 28 Pan (Pan troglodytes and Pan paniscus), a broad comparative sample of 55 anatomically modern humans from African and European populations, and other fossil hominins (Neandertals, Homo antecessor, Paranthropus boisei). The El Sidrón atlas fossils show typical features of the Neandertal atlas morphology, such as caudal projection of the anterior tubercle, gracility of both the posterior tubercle and the tuberosity for the insertion of the transverse ligament, and an anteroposteriorly elongated neural canal. Furthermore, when compared with atlases from the other taxa, Neandertals exhibit species-specific features of atlas morphology including a relatively lower lateral mass height, relatively narrower transverse foramina, and flatter and more horizontally oriented articular facets. Some of these features fit with previous suggestions of shorter overall length of the cervical spine and potential differences in craniocervical posture and mobility. Our results may support a different spinopelvic alignment in this species, as the atlas morphology suggests reduced cervical lordosis.

Computed tomographic angiography to analyze dangerous vertebral artery anomalies at the craniovertebral junction in patients with basilar invagination

OBJECTIVE

Failure to detect dangerous anatomic vertebral artery anomalies (AVAAs) and dangerous functional vertebral artery anomalies (FVAAs) at the craniovertebral junction (CVJ) in patients with basilar invagination (BI) can result in major complications such as intraoperative vertebral artery injury, brain infarctions, and even death. Iatrogenic vertebral artery injury is a rare but severe complication of cervical spine surgery. We aimed to evaluate dangerous vertebral artery anomalies at the CVJ in patients with BI using computed tomographic angiography (CTA).

METHODS

CTA images of 61 BI patients were retrospectively analyzed to evaluate AVAAs and FVAAs at the CVJ. Dangerous AVAAs include a persistent first intersegmental artery (FIA), fenestration of the vertebral artery (FEN), and posterior inferior cerebellar artery with an extradural C1/2 origin (PICA-C1/2). Dangerous FVAAs include a dominant vertebral artery (DVA) and hypoplastic vertebral artery ending in the PICA (HVA-PICA) without joining the basilar artery.

RESULTS

Overall, 31 female and 30 male patients (mean age, 42.3 years) were included. The incidences of FIA, FEN, and PICA-C1/2 were 29.5 % (18/61), 3.3 % (2/61), and 3.3 % (2/61), respectively, whereas the incidences of DVA and HVA-PICA were 36.1 % (22/61) and 1.65 % (1/61), respectively.

CONCLUSION

Dangerous vertebral artery anomalies at the CVJ have a high incidence in patients with BI. Preoperative CTA is highly recommended in such patients to identify anomalous vertebral arteries and reduce the risk of intraoperative injury.

Analysis of Risk Factors for Posterior C1 Screw-Related Complication: A Retrospective Study of 358 Posterior C1 Screws

BACKGROUND

Although C1 screw fixation is becoming popular, only a few studies have discussed about the risk factors and the patterns of C1 screw complications.

OBJECTIVE

To investigate the incidence of C1 screw complications and analyze the risk factors of the C1 screw complications.

METHODS

A total of 358 C1 screws in 180 consecutive patients were analyzed for C1 screw complications. Screw malposition, occipital neuralgia, major complications, and total C1 screw complications were analyzed.

RESULTS

The distribution of C1 screw entry point is as follows: inferior lateral mass, 317 screws (88.5 %); posterior arch (PA), 38 screws (10.7 %); and superior lateral mass, 3 screws (0.8 %). We sacrificed the C2 root for 127 screws (35.5 %). C1 instrumentation induced 3.1 % screw malposition, 6.4 % occipital neuralgia, 0.6 % vascular injury, and 3.4 % major complications. In multivariate analysis, deformity (odds ratio [OR]: 2.10, P = .003), traumatic pathology (OR: 4.97, P = .001), and PA entry point (OR: 3.38, P = .001) are independent factors of C1 screw malposition. C2 root resection can decrease the incidence of C1 screw malposition (OR: 0.38, P = .012), but it is a risk factor of occipital neuralgia (OR: 2.62, P = .034). Advanced surgical experience (OR: 0.09, P = .020) correlated with less major complication.

CONCLUSION

The incidence of C1 screw complications might not be uncommon, and deformity or traumatic pathology and PA entry point could be the risk factors to total C1 screw complications. The PA screw induces more malposition, but less occipital neuralgia. C2 root resection can reduce screw malposition, but increases occipital neuralgia.

Evaluation and Surgical Planning for Craniovertebral Junction Deformity

Craniovertebral junction (CVJ) deformity is a challenging pathology that can result in progressive deformity, myelopathy, severe neck pain, and functional disability, such as difficulty swallowing. Surgical management of CVJ deformity is complex for anatomical reasons; given the discreet relationships involved in the surrounding neurovascular structures and intricate biochemical issues, access to this region is relatively difficult. Evaluation of the reducibility, CVJ alignment, and direction of the mechanical compression may determine surgical strategy. If CVJ deformity is reducible, posterior in situ fixation may be a viable solution. If the deformity is rigid and the C1–2 facet is fixed, osteotomy may be necessary to make the C1–2 facet joint reducible. C1–2 facet release with vertical reduction technique could be useful, especially when the C1–2 facet joint is the primary pathology of CVJ kyphotic deformity or basilar invagination. The indications for transoral surgery are becoming as narrow as a treatment for CVJ deformity. In this article, we will discuss CVJ alignment and various strategies for the management of CVJ deformity and possible ways to prevent complications and improve surgical outcomes.

Interobserver reliability of the Gehweiler classification and treatment strategies of isolated atlas fractures: an internet-based multicenter survey among spine surgeons

Purpose

Atlas (C1) fractures are commonly rated according to the Gehweiler classification, but literature on its reliability is scarce. In addition, evaluation of fracture stability and choosing the most appropriate treatment regime for C1-injuries are challenging. This study aimed to investigate the interobserver reliability of the Gehweiler classification and to identify whether evaluation of fracture stability as well as the treatment of C1-fractures are consistent among spine surgeons.

Methods

Computed tomography images of 34 C1-fractures and case-specific information were presented to six experienced spine surgeons. C1-fractures were graded according to the Gehweiler classification, and the suggested treatment regime was recorded in a questionnaire. For data analyses, SPSS was used, and interobserver reliability was calculated using Fleiss’ kappa (κ) statistics.

Results

We observed a moderate reliability for the Gehweiler classification (κ = 0.50), the evaluation of fracture stability (κ = 0.50), and whether a surgical or non-surgical therapy was indicated (κ = 0.53). Type 1, 2, 3a, and 5 fractures were rated stable and treated non-surgically. Type 3b fractures were rated unstable in 86.7% of cases and treated by surgery in 90% of cases. Atlas osteosynthesis was most frequently recommended (65.4%). Overall, 25.8% of type 4 fractures were rated unstable, and surgery was favoured in 25.8%.

Conclusion

We found a moderate reliability for the Gehweiler classification and for the evaluation of fracture stability. In particular, diverging treatment strategies for type 3b fractures emphasise the necessity of further clinical and biomechanical investigations to determine the optimal treatment of unstable C1-fractures.

Vertebral Artery Terminating Posterior Inferior Cerebellar Artery (PICA-VA) as a Potential Risk Factor in Cervical Spine Surgery

OBJECTIVE

Unilateral vertebral artery (VA) injury is thought to not result in serious complications. The dominant-side VA should be preserved, although the importance of the nondominant-side VA has not been discussed. The injury of VA terminating posterior inferior cerebellar artery (PICA-VA) may result in cerebellar infarction. The characteristics of PICA-VA were evaluated.

METHODS

In study 1, results of head and neck magnetic resonance angiography were reviewed for 358 consecutive cases. VA diameter was measured at the V2 segment. Relationships between frequency of PICA-VA and asymmetry and diameter of the VA were analyzed. In study 2, results of magnetic resonance angiography were measured for 62 consecutive cases aged ≤39 years. Frequency of PICA-VA was compared between this young age group and 324 of the 358 cases aged ≥50 years.

RESULTS

Mean age for the total cohort was 67.8 ± 13.8 years (range, 10-94 years). PICA-VA was identified in 44 cases (12.3%). Mean diameter of all VAs was 3.2 ± 0.76 mm. Mean diameter of PICA-VA was 2.0 ± 0.55 mm, significantly smaller than the nondominant side in Confluence (+) (2.8 ± 0.59 mm; P < 0.001). Among the 56 VAs <2.0 mm, 26 (46.4%) were PICA-VA. PICA-VA was seen in 1 of the 62 cases aged ≤39 years (1.6%), and in 43 of the 324 cases aged ≥50 years (13.3%), showing a significantly lower frequency in the younger population (P < 0.001).

CONCLUSIONS

Whether PICA-VA injury causes complications is not obvious. However, PICA-VA should also be preserved considering that potential risks exist. If the VA is small or shows a large difference in diameter between sides, special care should be taken during cervical spine surgery.

Microanatomy of the dura mater at the craniovertebral junction and spinal region for safe and effective surgical treatment

OBJECTIVE

Few reports have been published regarding the detailed microsurgical anatomy of the dura mater at the craniovertebral junction (CVJ), although many neurosurgeons have had the opportunity to conduct surgeries in this region, such as in cases of Chiari malformation. The authors aimed to evaluate the detailed and precise microsurgical anatomy of the dura mater at the CVJ for safe and effective surgical treatment at this area.

METHODS

This study consisted of dissection of 4 formalin-fixed, continuous, human cadaveric dura maters, extending from the posterior fossa to the C2 level. After removing the occipital bone and C1 laminae, a dural incision was made to harvest the specimen. The following structural and topographical aspects of the dura mater in each region were studied: 1) thickness, 2) morphological characteristics, and 3) vascular structures.

RESULTS

The average thicknesses of the dura mater were 313.4 ± 137.0 μm, 3051.5 ± 798.8 μm, and 866.5 ± 359.0 μm in the posterior cranial fossa, CVJ, and spinal region, respectively. The outer layer of the posterior cranial dura mater and the tendon of the rectus capitis posterior minor muscle were connected, forming the "myodural bridge." The dura mater at the CVJ had a well-developed vascular network. These vascular structures were determined to be veins or the venous sinus, and were mainly located around the interface between the inner layer of the cranial dura mater and the rectus capitis posterior minor muscle layer. Regarding the morphological features, the bulging located in the inner layer of the dura mater at the CVJ was determined to be the marginal sinus, and contained a pacchionian granulation that allowed for CSF circulation. In the spinal region, the dura mater was characterized by a single, thick layer enclosing the collagen fibers with almost the same orientation.

CONCLUSIONS

The dura mater at the CVJ displayed dynamic morphological changes within an extremely short segment. Its characteristic anatomical features were not similar to those in the cranial regions. The dural bulging at the CVJ was determined to be the venous sinus. During surgery in the posterior fossa, CVJ, and spinal cord, different procedures should be used because of the specific microsurgical anatomy of each region.

Avoiding iatrogenic injuries to the vertebral artery: A morphometric study of the vertebral artery-free dissection area

OBJECTIVE

To determine the area of a safety window that excludes the vertebral artery for the safe access of the occipital condyle screws during occipitocervical fixation.

METHODS

This study included 138 cervical computed tomography angiograms. Six measurements per side were made in each imaging study. These measurements are from the vertebral artery to (A) the mastoid process, (B) the mastoid incisura, (C) the posterior condylar fossa, (D) the occipital condyle in its midline, and (E) the medial border of the condyle. We also measured from the tip of the mastoid process to the lower border of the occipital condyle on its lateral side (F).

RESULTS

A total of 276 areas from 138 individuals were included, of which 51.4 % were men. The mean age was 54.2 ± 18.63 years. The mean variable measurements (mm) for all the population were 21 ± 4, 16 ± 3, 6 ± 2, 3 ± 2, 2 ± 1 and 35 ± 4 for variables A-F, respectively. We found significant differences between sex when we compared measurements A (p = 0.003), C (p = 0.001), D (p = 0.000) and F (p = 0.000). The incidence rate of dominance for the vertebral artery was 18.8 % and 30.4 % for right and left respectively.

CONCLUSION

Women had significantly smaller measures than men. This could indicate a higher risk of iatrogenic injury secondary to a smaller vertebral artery-free area. Results may guide surgeons in the pre-surgical planning aiming to reduce the risk of iatrogenic injuries to the vertebral artery.

Paracondylar process combined with persistent first intersegmental vertebral artery: an anatomic case report and literature review

The paracondylar process (PCP) and the persistent first intersegmental vertebral artery (PFIA) are both rare variations at the craniovertebral junction. We report the above two variations coexisting in one cadaveric head during the training of far lateral approach in our skull base lab. The specimen simultaneously had a left occipitalized atlas associated with a PFIA and a right PCP. The previous reports, the embryogenesis, and the clinical implications of the two variations were also reviewed. Preoperative recognition of the rare variations is essential to a safe far lateral approach.

Posterior atlantoaxial fusion: a comprehensive review of surgical techniques and relevant vascular anomalies

Posterior atlantoaxial fusion is an important surgical technique frequently used to treat various pathologies involving the cervical 1-2 joint. Since the beginning of the 20th century, various fusion techniques have been developed with improved safety profile, higher fusion rates, and superior clinical outcome. Despite the advancement of technology and surgical techniques, posterior C1-2 fusion is still a technically challenging procedure given the complex bony and neurovascular anatomy in the craniovertebral junction (CVJ). In addition, vascular anomalies in this region are not uncommon and can lead to devastating neurovascular complications if unrecognized. Thus, it is important for spine surgeons to be familiar with various posterior atlantoaxial fusion techniques along with a thorough knowledge of various vascular anomalies in the CVJ. Intimate knowledge of the various surgical techniques in combination with an appreciation for anatomical variances, allows the surgeon develop a customized surgical plan tailored to each patient's particular pathology and individual anatomy. In this article, we aim to provide a comprehensive review of existing posterior C1-2 fusion techniques along with a review of common vascular anomalies in the CVJ.

Guideline for Posterior Atlantoaxial Internal Fixation Assisted by Orthopaedic Surgical Robot

Atlantoaxial transarticular facet screw fixation (Magerl technique) and C₁ lateral mass screws combined with C₂ pedicle screws fixation (Harms technique) are the most commonly used techniques for posterior internal fixation in the upper cervical spine. Upper cervical spinal surgery is a technically demanding and challenging procedure because of complicated anatomical structures and frequent occurrence of anomalies. Accurate insertion of screws allows for stable and secure internal fixation, which is necessary for both techniques. Traditional methods under fluoroscopic assistance in this region cannot meet the requirements of high levels of accuracy and security during the procedure. Robot-assisted spinal surgery can provide accurate and reliable guidance during the screw insertion, which is evidenced in the literature. As a recently developed technique, robot-assisted surgery is supposed to be performed by skilled surgeons who have received standard training for robotic surgery. The standardized upper cervical spinal surgery assisted by the robot system needs to be introduced to these surgeons. Based on the consensus of consultant specialists, the literature review, and our local experience, this guideline included the introduction of the robotic system, the workflow of robot-assisted procedures, and the precautions to take during procedures. This guideline aims to provide a standardization of the robotic surgery for posterior atlantoaxial internal fixation.