TLTC, a T5 exonuclease-mediated low-temperature DNA cloning method

Argonaute-driven programmable multi-enzyme complex assembly on ribosomal RNA scaffolds

Scaffold-based multi-enzyme assembly strategies have significantly advanced biocatalysis by enhancing reaction efficiency through precise spatial organization of enzymes. While DNA- and protein-based scaffolds have been extensively studied, RNA scaffolds present unique advantages, including structural flexibility, dynamic regulation, and functional diversity. However, their application in vitro has been limited due to challenges related to stability and cost. Here, we developed a programmable RNA scaffold system that leverages catalytically inactive MbpAgo to spatially organize natural protein macromolecules into multi-enzyme complexes for in vitro cascade reactions. This strategy significantly enhances the catalytic efficiency of multi-enzyme systems in vitro. We utilized Förster resonance energy transfer experiments demonstrated tunable protein localization along the scaffold. By designing short guide DNAs (gDNAs) to direct MbpAgo-enzyme assembly onto yeast ribosomal RNA scaffolds, we achieved precise positioning of three enzymes in the ATP biosynthesis pathway, resulting in a 5.5-fold increase in catalytic yield after 3 h compared to scaffold-free multi-enzyme complexes. Additionally, the modular design of the Ago-gDNA-RNA scaffold system allows for dynamic reconfiguration of enzyme arrangements through simple modifications of gDNAs, enabling adaptability to diverse multi-enzyme reactions. This study underscores the potential of Argonaute-mediated RNA scaffolds as a versatile and efficient platform for in vitro multi-enzyme assembly.

Engineered bacterial outer membrane vesicles co-delivering Angio-3 and doxorubicin to enhance tumor therapy

Bacterial outer membrane vesicles (OMVs) have emerged as versatile nanomaterial-based drug delivery systems that can stimulate systemic immune responses and facilitate precise co-delivery of multiple therapeutic agents. This study introduces a bioengineering approach that enables the co-delivery of the angiogenesis inhibitor Angio-3 and the chemotherapeutic agent doxorubicin (DOX) within OMVs, creating a potent antitumor therapeutic platform. Angio-3 displayed on the surface of OMVs inhibited angiogenesis and decreased vascular permeability, which in turn impeded the supply of nutrients necessary for tumor growth. Moreover, intrinsic properties of OMVs triggered a systemic immune response. Both in vitro and in vivo studies, including a CT26 tumor-bearing mouse model, have demonstrated that the OMV@A&D-based therapeutic regimen, which integrates antiangiogenesis, chemotherapy, and immune activation, significantly suppresses tumor proliferation. This study highlights the potential of bioengineered OMVs in revolutionizing cancer therapy by offering a multifaceted and synergistic platform that enhances therapeutic outcomes.

DAPE cloning with modified primers for producing designated lengths of 3' single-stranded ends in PCR products

For in vitro DNA assembly, enzymes with exonuclease activities have been utilized to generate relatively long recessed ends on DNA fragments, which can anneal to other DNA fragments if they have complementary nucleotide sequences. The combined construct can be directly delivered to competent cells, where the gaps and nicks between the fragments are completely rectified. We introduce a versatile sequence- and ligation-independent cloning (SLIC) method called 'DNA Assembly with Phosphorothioate (PT) and T5 Exonuclease' (DAPE), which generates precise lengths of 3' overhangs at both ends of linearized DNA. In contrast to conventional SLIC techniques, which are not suitable for cloning DNA fragments smaller than 50 base pairs (bp) due to overzealous exonuclease activity, such as with gRNA and epitope tags, DAPE can efficiently and precisely assemble several fragments in a single reaction regardless of the size of the DNA. Thus, DAPE, as an advanced toolkit for DNA cloning and synthetic biology, may further expedite the construction of more elaborate multi-gene circuitry.

Visual and High-Efficiency Secretion of SARS-CoV-2 Nanobodies with Escherichia coli

Nanobodies have gained attention as potential therapeutic and diagnostic agents for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) due to their ability to bind and neutralize the virus. However, rapid, scalable, and robust production of nanobodies for SARS-CoV-2 remains a crucial challenge. In this study, we developed a visual and high-efficiency biomanufacturing method for nanobodies with Escherichia coli by fusing the super-folder green fluorescent protein (sfGFP) to the N-terminus or C-terminus of the nanobody. Several receptor-binding domain (RBD)-specific nanobodies of the SARS-CoV-2 spike protein (S) were secreted onto the surface of E. coli cells and even into the culture medium, including Fu2, ANTE, mNb6, MR3-MR3, and n3113.1. The nanobodies secreted by E. coli retained equal activity as prior research, regardless of whether sfGFP was removed. Since some of the nanobodies bound to different regions of the RBD, we combined two nanobodies to improve the affinity. Fu2-sfGFP-ANTE was constructed to be bispecific for the RBD, and the bispecific nanobody exhibited significantly higher affinity than Fu2 (35.0-fold), ANTE (7.3-fold), and the combination of the two nanobodies (3.3-fold). Notably, Fu2-sfGFP-ANTE can be normally secreted into the culture medium and outer membrane. The novel nanobody production system enhances the efficiency of nanobody expression and streamlines the downstream purification process, enabling large-scale, cost-effective nanobody production. In addition, E. coli cells secreting the nanobodies on their surface facilitates screening and characterization of antigen-binding clones.

Development of a starch-fermenting Zymomonas mobilis strain for bioethanol production

BACKGROUND

Biorefinery using microorganisms to produce biofuels and value-added biochemicals derived from renewable biomass offers a promising alternative to meet our sustainable energy and environmental goals. The ethanologenic strain Zymomonas mobilis is considered as an excellent chassis for constructing microbial cell factories for diverse biochemicals due to its outstanding industrial characteristics in ethanol production, high specific productivity, and Generally Recognized as Safe (GRAS) status. Nonetheless, the restricted substrate range constrains its application.

RESULTS

The truncated ice nucleation protein InaK from Pseudomonas syringae was used as an autotransporter passenger, and α-amylase was fused to the C- terminal of InaK to equip the ethanol-producing bacterium with the capability to ferment renewable biomass. Western blot and flow cytometry analysis confirmed that the amylase was situated on the outer membrane. Whole-cell activity assays demonstrated that the amylase maintained its activity on the cell surface. The recombinant Z. mobilis facilitated the hydrolysis of starch into oligosaccharides and enabled the streamlining of simultaneous saccharification and fermentation (SSF) processes. In a 5% starch medium under SSF, recombinant strains containing Peno reached a maximum titer of 13.61 ± 0.12 g/L within 48 h. This represents an increase of 111.0% compared to the control strain's titer of titer of 6.45 ± 0.25 g/L.

CONCLUSIONS

By fusing the truncated ice nucleation protein InaK with α-amylase, we achieved efficient expression and surface display of the enzyme on Z. mobilis. This fusion protein exhibited remarkable enzymatic activity. Its presence enabled a cost-effective bioproduction process using starch as the sole carbon source, and it significantly reduced the required cycle time for SSF. This study not only provides an excellent Z. mobilis chassis for sustainable bioproduction from starch but also highlights the potential of Z. mobilis to function as an effective cellular factory for producing high-value products from renewable biomass.

Heterologous Expression of Ketoreductase ChKRED20 Mutant in Pichia pastoris and Bioreductive Production of (R)-1, 3-Butanediol

(R)-1, 3-Butanediol (1, 3-BDO) is an important intermediate in the synthesis of aromatics, pheromones, insecticides, and beta-lactam antibiotics. The ChKRED20 is a robust NADH-dependent ketoreductase identified from Chryseobacterium sp. CA49. We obtained a ChKRED20 mutant (M12) through directed evolutionary screening of ChKRED20, the mutant with significantly improved activity to asymmetrically reduce 4-hydroxy-2-butanone (4H2B) to (R)-1, 3-BDO. So far, both ChKRED20 and its mutants have been expressed in intracellular in E. coli, the process of purification after intracellular expression is complicated, which leads to high cost. Here, we expressed M12 by constructing multicopy expression strains in P. pastoris, and the target protein yield was 302 mg/L in shake-flask fermentation and approximately 3.5 g/L in high-density fermentation. The recombinant M12 showed optimal enzyme activity at 30 °C and had high activity within a broad pH range of 6.0-8.0, and also showed high thermal stability. The recombinant M12 was further used for the reduction of 4H2B to (R)-1, 3-BDO, and 98.9% yield was achieved at 4540 mM 4H2B. The crude M12 enzyme extract was found to catalyze the bioreductive production of (R)-1, 3-BDO with excellent stereoselectivity (ee > 99%) and meet the production requirements. Our research shows that the M12 mutant can be used for the synthesis of (R)-1, 3-BDO, and the P. pastoris expression system is an ideal platform for the large-scale, low-cost preparation of ChKRED20 or its mutants, which may have applications in industrial settings.

Circular PCR as an efficient and precise umbrella of methods for the generation of circular dsDNA with staggered nicks: Mechanism and types

Here, we introduce the highly versatile circular polymerase chain reaction (CiPCR) technique, propose a mechanism of action, and describe a number of examples demonstrating the versatility of this technique. CiPCR takes place between two fragments of dsDNA with two homologous regions, as long as one of the fragments carries said regions at its 3'- and 5'-ends. Upon hybridization, elongation by a polymerase occurs from all 3'-ends continuously until a 5'-end is reached, leading to stable circular dsDNA with staggered nicks. When both dsDNA fragments carry the homology at their 3'- and 5'-ends (Type I CiPCR), all four 3'-ends effectively prime amplification of the intervening region and CiPCR products can function as template during the reaction. In contrast, when only one of the two dsDNA fragments carries the homologous regions at its 3'- and 5'-ends and the other carries such regions internally (Type II CiPCR), only two 3'-ends can be amplified and CiPCR products possess no template activity. We demonstrate the applicability of both CiPCR types via well-illustrated experimental examples. CiPCR is well adapted to the quick resolution of most of the molecular cloning challenges faced by the biology/biomedicine laboratory, including the generation of insertions, deletions, and mutations.

A Whole-Process Visible Strategy for the Preparation of Rhizomucor miehei Lipase with Escherichia coli Secretion Expression System and the Immobilization

BACKGROUND

Rhizomucor miehei (RM) lipase is a regioselective lipase widely used in food, pharmaceutical and biofuel industries. However, the high cost and low purity of the commercial RM lipase limit its industrial applications. Therefore, it is necessary to develop cost-effective strategies for large-scale preparation of this lipase. The present study explored the high-level expression of RM lipase using superfolder green fluorescent protein (sfGFP)-mediated Escherichia coli secretion system.

RESULTS

The sfGFP(-15) mutant was fused to the C-terminus of RM lipase to mediate its secretion expression. The yield of the fusion protein reached approximately 5.1 g/L with high-density fermentation in 5-L fermentors. Unlike conventional secretion expression methods, only a small portion of the target protein was secreted into the cell culture while majority of the fusion protein was still remained in the cytoplasm. However, in contrast to intracellular expression, the target protein in the cytoplasm could be transported efficiently to the supernatant through a simple washing step with equal volume of phosphate saline (PBS), without causing cell disruption. Hence, the approach facilitated the downstream purification step of the recombinant RM lipase. Moreover, contamination or decline of the engineered strain and degradation or deactivation of the target enzyme can be detected efficiently because they exhibited bright green fluorescence. Next, the target protein was immobilized with anion-exchange and macropore resins. Diethylaminoethyl sepharose (DEAE), a weak-basic anion-exchange resin, exhibited the highest bind capacity but inhibited the activity of RM lipase dramatically. On the contrary, RM lipase fixed with macropore resin D101 demonstrated the highest specific activity. Although immobilization with D101 didn't improve the activity of the enzyme, the thermostability of the immobilized enzyme elevated significantly. The immobilized RM lipase retained approximately 90% of its activity after 3-h incubation at 80 °C. Therefore, D101 was chosen as the supporting material of the target protein.

CONCLUSION

The present study established a highly efficient strategy for large-scale preparation of RM lipase. This innovative technique not only provides high-purity RM lipase at a low cost but also has great potential as a platform for the preparation of lipases in the future.

Overexpression of salusin‑β downregulates adipoR1 expression to prevent fatty acid oxidation in HepG2 cells

Salusin‑β and adiponectin receptor 1 (adipoR1) serve important roles in the development of certain cardiovascular diseases and lipid metabolism. However, to the best of our knowledge, the relationship between salusin‑β and adipoR1, and their underlying mechanisms of action, currently remain unclear. In the present study, lentiviral vectors designed to overexpress salusin‑β or knock down salusin‑β expression were used in 293T and HepG2 cells. Semi‑quantitative PCR was performed to investigate the relationship between salusin‑β and adipoR1 mRNA expression in 293T cells. Western blotting was used to assess the protein expression levels of adipoR1, adenosine monophosphate‑activated protein kinase (AMPK), acetyl‑CoA carboxylase (ACC) and carnitine palmitoyl transferase 1A (CPT‑1A) in transfected HepG2 cells. Simultaneously, HepG2 cells were treated with an adipoR1 inhibitor (thapsigargin) or agonist (AdipoRon) and the resultant changes in the expression levels of the aforementioned proteins were observed. Oil Red O staining and measurements of cellular triglyceride levels were performed to assess the extent of lipid accumulation in HepG2 cells. The results demonstrated that salusin‑β overexpression downregulated adipoR1 expression and inhibited the phosphorylation of AMPK and ACC, which led to decreased CPT‑1A protein expression. By contrast, salusin‑β knockdown increased adipoR1 expression and promoted the phosphorylation of AMPK and ACC, which conversely enhanced CPT‑1A protein expression. Treatment with adipoR1 agonist, AdipoRon, reversed the effects of salusin‑β overexpression. In addition, salusin‑β overexpression enhanced intracellular lipid accumulation in HepG2 cells induced by free fatty acid treatment. These findings highlighted the potential regulatory role of salusin‑β in adipoR1‑mediated signaling pathways. To conclude, the present study provided insights into the regulation of fatty acid metabolism by the liver. In particular, salusin‑β may serve as a potential target for the therapeutic intervention of metabolic disorders of lipids.