Size and Charge Evaluation of Standard Humic and Fulvic Acids as Crucial Factors to Determine Their Environmental Behavior and Impact

Interference of PFAS sorption on zeolites from natural water characteristics

Per- and polyfluoroalkyl substances (PFAS) are emerging anthropogenic pollutants of concern and are associated with potential human and environmental health concerns. PFAS removal can be achieved using adsorbents such as activated carbon and ion exchange resins. Recently, zeolites have been identified as another potential adsorption technology with increased selectivity and product regenerability that is not currently achieved with other adsorbents. Zeolite CP814E∗ (BEA) was tested in batch reactions for PFAS removal in different water matrix characteristics, including pH, select cations, humic acids (HA), fulvic acids (FA), and natural organic matter (NOM). In synthetic EPA waters, BEA performance increased compared to ultrapure water testing. BEA performance also significantly increased in the presence of Na+, Ca2+, and Mg2+ ions compared to ultrapure waters. PFOA and PFOS sorption did not vary significantly in the 6-9 pH range. HA, FA, and NOM did not significantly impact the sorption of PFOA and PFOS on the BEA at 1 g/L zeolite loading. One organic interferent, Suwannee River humic acids, did reduce PFOA sorption when the ratio of adsorbent to liquid was reduced to 0.1 mg/L. BEA retained sorption capacity over seven thermal regeneration cycles, and a BEA test with a real water demonstrated PFOA, PFOS and PFHxS adsorption at the parts per trillion level.

Escherichia coli migration in saturated porous media: Mechanisms of humic acid regulation

The regulatory behavior of humic acid (HA) on the migration of Escherichia coli (E.coli) in saturated porous media has garnered considerable research interest. Although prior studies have confirmed that HA indeed facilitates the migration of E. coli in saturated porous media, investigating the migration process and regulatory mechanisms at the microscale remains challenging. This study compared the differences in the migration behavior of E. coli in saturated porous media under conditions with and without HA, revealing the dynamic mechanism by which HA regulates microbial migration through the "bacterium-medium-solution" triple interface interaction. The results indicated that E. coli achieves the transition of the "run-tumble" movement pattern (run ≈ 1 s, tumble ≈ 0.1 s) through flagellar morphological regulation, thus completing directed migration in a complex pore network. The addition of HA significantly enhanced the migration rate of E. coli, with an increase of at least 5 %. For the bacteria, HA induced the restructuring of lipopolysaccharides on the bacterial surface, altered the surface Zeta potential of the bacteria, and promoted the formation of stable hetero-aggregates between bacteria and HA. At the medium interface, HA modifies the surface charge of the medium, regulates pore structure, and increases hydrophilicity through the adsorption-desorption mechanism. In the solution system, the dissociation characteristics of HA's carboxyl and phenolic hydroxyl groups dynamically regulated the solution's ionic strength and pH value, creating a chemical microenvironment suitable for bacterial migration. This study systematically revealed the multi-dimensional mechanisms by which HA regulates microbial transport through molecular interface engineering. It provides theoretical support for establishing predictive models of pathogen migration in groundwater systems and offers important guidance for optimizing microbial control strategies in water treatment processes.

Molecular foundations for shear-induced dynamics of natural organic matter

The overall objective of the present work was to quantify how shear, coupled with varying salt concentration, affected the particle size distribution and relaxation/aggregation behavior for various organic sources of nonliving natural organic matter (NNOM) in surface water. NNOM has been implicated as a conditioning agent leading to the formation of biofilms such as algae. NNOM is also a responsible in surface waters for facilitated transport of a variety of anthropogenic pollutants. These are NNOM surface-related phenomena, yet the variable surface area and surface composition of NNOM, which can change dependent on shear rate, is not discussed in the literature. NNOM polymer-like dynamics can interact with stream water velocity differences to determine the process and result of aggregation. The fundamental role of post-shear NNOM molecular structure and dynamic aggregation (self-assembly) is examined here alongside fresh (hydrological) versus mined (terrestrial) NNOM. Shear rate can be seen as a change in the velocities of streamlines in hydrology. In this early work, the response to shear rate for three types of NNOM was measured using a stress-controlled rheometer under varying conditions of ionic strength. Samples were studied for rheological response after a variety of pre-shear conditions, and data then coupled with surface composition data from previously reported fluorescence studies. Interestingly, a size class of 5 μm aggregates disappeared when Aldrich humic acid samples were treated with 0.3 M Ca2+. Evidence is also presented that the environmental samples flocculated at shear rates up to 400 s-1, rather than exhibiting particle breakup, with implications for reducing NNOM surface area. Dynamic response of different NNOM sources was not the same, some sources showing evidence of self-assembly. The molecular response to shear may play an important role in understanding the surface area and composition of NNOM responsible for facilitated transport of pollutants and initiation of biofilms.

Groundwater solutes influence the adsorption of short-chain perfluoroalkyl acids (PFAA) to colloidal activated carbon and impact performance for in situ groundwater remediation

Subsurface injection of colloidal activated carbon (CAC) is an in situ remediation strategy for perfluoroalkyl acids (PFAA), but the influence of groundwater solutes on longevity is uncertain, particularly for short-chain PFAA. We quantify the impact of inorganic anions, dissolved organic matter (DOM), and stabilizing polymer on PFAA adsorption to a commercial CAC. Surface characterization supported PFAA chain-length dependent adsorption results and mechanisms are provided. Inorganic anions decreased adsorption for short-chain PFAA (<7 perfluorinated carbons) due to competitive effects, while long-chain PFAA (≥ 7 perfluorinated carbons) were less impacted. DOM decreased adsorption of all PFAA in a chain-length dependent manner. High DOM concentrations (10 mg/L, ∼5 mg OC/L) decreased PFOA adsorption by a factor of 2, PFPeA by one order of magnitude, and completely hindered PFBA adsorption. High MW DOM has less impact on short-chain PFAA than low MW DOM, possibly due to differences in the ability to access CAC micropores. Low DOM concentrations (1 mg/L, ∼0.5 mg OC/L) did not impact adsorption. CMC (90 kDa average MW) had negligible impact on PFAA adsorption likely due to minimal CAC surface coverage. Longevity modeling demonstrated that groundwater solutes limit the capacity for PFAA in a CAC barrier, particularly for short-chain PFAA.

A practical guide to the discovery of biomolecules with biostimulant activity

The growing demand for sustainable solutions in agriculture, which are critical for crop productivity and food quality in the face of climate change and the need to reduce agrochemical usage, has brought biostimulants into the spotlight as valuable tools for regenerative agriculture. With their diverse biological activities, biostimulants can contribute to crop growth, nutrient use efficiency, and abiotic stress resilience, as well as to the restoration of soil health. Biomolecules include humic substances, protein lysates, phenolics, and carbohydrates have undergone thorough investigation because of their demonstrated biostimulant activities. Here, we review the process of the discovery and development of extract-based biostimulants, and propose a practical step-by-step pipeline that starts with initial identification of biomolecules, followed by extraction and isolation, determination of bioactivity, identification of active compound(s), elucidation of mechanisms, formulation, and assessment of effectiveness. The different steps generate a roadmap that aims to expedite the transfer of interdisciplinary knowledge from laboratory-scale studies to pilot-scale production in practical scenarios that are aligned with the prevailing regulatory frameworks.

Occurrence and cycle of dissolved iron mediated by humic acids resulting in continuous natural photodegradation of 17α-ethinylestradiol

17α-ethinylestradiol (EE2), a synthetic endocrine-disrupting chemical, can degrade in natural waters where humic acids (HA) and dissolved iron (DFe) are present. The iron is mostly bound in Fe(III)-HA complexes, the formation process of Fe(III)-HA complexes and their effect on EE2 degradation were explored in laboratory experiments. The mechanism of ferrihydrite facilitated by HA was explored with results indicating that HA facilitated the dissolution of ferrihydrite and the generation of Fe(III)-HA complexes with the stable chemical bonds such as C-O, CO in neutral, alkaline media with a suitable Fe/C ratio. 1O2, •OH, and 3HA* were all found to be important in the photodegradation of EE2 mediated by Fe(III)-HA complexes. Fe(III)-HA complexes could produce Fe(II) and hydrogen peroxide (H2O2) to create conditions suitable for photo-Fenton reactions at neutral pH. HA helped to maintain higher dissolved iron concentrations and alter the Fe(III)/Fe(II) cycling. The natural EE2 photodegradation pathway elucidated here provides a theoretical foundation for investigating the natural transformation of other trace organic contaminants in aquatic environments.

Terrigenous humic substances regulate the concentrations of dissolved Fe and Cu (but not Al, Mn, Ni or Zn) in the Gaoping River plume

The small mountainous rivers of Oceania discharge a large fraction of their dissolved and particulate load of materials within a very small percentage of the time. As a result, the yearly inputs and physicochemical forms of dissolved metals exported to the ocean by these rivers are poorly quantified. We investigated the wet-season distribution patterns of metals and fluorescent organic substances in the surface waters of the Gaoping River plume, SW Taiwan, under both moderate (Sep 2020) and strong flow conditions (Aug 2021). The mixing behaviour of both soluble (<5 kDa) and colloidal (>5 kDa) metals and fluorescent components was examined over the salinity range 3.0-32.2 in 2020 and 5.8-31.1 in 2021. We detected two humic-like and one protein-like fluorescent components, the same on both surveys. The humic-like components, C1 and C3, originated from the Gaoping River and correlated strongly with Cu and Fe, respectively. Component C3 showed a greater enrichment relative to C1 in the colloidal (C3/C1 > 0.8) than in the soluble phase (C3/C1 = 0.4). The protein-like component, C2, came from both terrestrial and marine sources and displayed a more complex mixing behaviour than the other two. One striking result was that the effective zero-salinity concentrations of Fe (∼300 nM) and Cu (∼23 nM) did not change significantly in response to a 10-fold increase in river discharge between Sep 2020 and Aug 2021. Similarly to Fe and Cu, the distribution patterns of Components C1 and C3 did not change significantly between the moderate and the strong plume, and C3 and C1 correlated strongly with Fe and Cu, respectively. We conclude that subtropical mountainous rivers can provide soil-derived humic substances which facilitate and regulate the delivery of Fe and Cu to the ocean, provided mountain forests are preserved.

Evolution from basic to advanced structure of fulvic acid and humic acid prepared by food waste

Fulvic acid (FA) and humic acid (HA) are common polyacids in nature. However, the evolutionary process of their basic and advanced structures is still unclear. FA and HA were separated into five molecular weight components to investigate the process of evolution from small to large molecules. The primary structure analysis showed that FA were rich in CN, COOH and OH content, while HA were rich in (CH2)n, NH2 and CC. Moreover, with the molecular weight increasing, the structures could complement each other to maintain the hydrophilic or hydrophobic balance. The 2D-COS spectroscopy demonstrated that during the growth of FA, COOH, NH2 and OH firstly respond. On the other hand, during the growth of HA, NH2 and (CH2)n firstly respond. In addition, advanced structure of FA was affected by intramolecular hydrogen bonds and π - π interaction. HA was affected by hydrophobic interactions due to the abundance of hydrophobic groups, primarily (CH2)n and benzene rings. 3D conformational fitting and particle size characterization confirmed that the interaction forces determine that FA and HA become tightly and loosely molecules respectively. This study is to further explore the geochemical formation and evolution process of FA and HA molecules.

Adsorption/desorption of mercury (II) by artificially weathered microplastics: Kinetics, isotherms, and influencing factors

While both mercury (Hg) and microplastics (MPs) are well-studied global pollutants, comparatively little is known about the interactions between them and the mobilization of Hg from MPs into organisms. We examined the affinity of Hg(II) to artificially weathered MPs, including polyamide (w-PA), polyethylene (w-PE), polyethylene terephthalate (w-PET), polyester fibers (w-PEST), polyvinyl chloride (w-PVC), and polylactic acid (w-PLA), along with crumb rubber (CR) and PE collected from a wastewater treatment plant (WWTP-PE). WWTP-PE, CR, and w-PEST had particularly high Hg(II) affinities, which can be attributed to electrostatic interaction and pore filling. The adsorption followed a pseudo-second-order kinetic process and fitted the Freundlich model, suggesting multi-step (mass transfer and intraparticle diffusion) and heterogeneous adsorptions. Hydrochemical conditions (pH, dissolved organic matter (DOM), salinity and co-existent metal ions) all impacted Hg-MP behavior. Changes in Hg speciation and MP surface properties contributed to the different Hg(II) adsorption capacities for the MPs. Weathering of MPs generally increased the adsorption of Hg(II) onto MPs, but CR, PET and PEST did not follow this trend. Less than 3% of adsorbed Hg(II) was mobilized from the MPs in freshwater, but that increased up to 73% under simulated avian digestive conditions, suggesting increased bioavailability of Hg(II) from ingested MPs. Overall, weathered MPs adsorb and retain Hg(II) under environmentally relevant conditions but desorb much of it in simulated avian digestion fluid, suggesting that birds that ingest MPs may have increased Hg(II) exposure.

Effects of different types of vegetation cover on soil microorganisms and humus characteristics of soda-saline land in the Songnen Plain

Introduction

In the soda-saline grasslands of the Songnen Plain, Jilin Province, China, the prohibition of grazing has led to significant changes in plant communities and soil properties. However, the intricate interplay between soil physical and chemical attributes, the soil microbial community, and their combined influence on soil humus composition remains poorly understood.

Methods

Our study aimed to evaluate the impact of natural vegetation restoration on soil properties, microbial community diversity, and composition in the soda-saline soil region of the Songnen Plain. We conducted assessments of soil physical and chemical properties, analyzed community diversity, and composition at a soil depth range of 0-20 cm. The study covered soils with dominant soda-saline vegetation species, including Suaeda glauca Bunge, Puccinellia chinampoensis Ohwi, Chloris virgata Swarta, Phragmites australis (Clay.), Leymus chinensis (Trin.), and Tzvelev. We compared these vegetated soils to bare land devoid of any plants.

Results

We found that soil organic content (SOC) in vegetation restoration areas was higher than in bare land, with SOC content varying between 3.64 and 11.15 g/kg in different vegetated areas. Notably, soil pH emerged as a pivotal factor, explaining 11.4% and 12.2% of the variance in soil bacteria and fungi, respectively. There were correlations between SOC content and the relative abundance of specific microbial groups, with Acidobacteria and Mortierella showing a positive correlation, while Actinobacteria, Gemmatimonadetes, and Ascomycota exhibited significant negative correlations with SOC.

Discussion

The disparities in SOC composition and content among the soda-saline vegetation types were primarily attributed to variations in pH. Consequently, reducing soil pH is identified as a critical step in the process of vegetation restoration in soda-saline land. Prohibiting grazing has the potential to increase soda-saline SOC content and enhance microbial diversity, with Leymus chinensis and Phragmites australis showing particularly promising results in terms of higher SOC carbon content and microbial diversity.

Synthesis of PES membranes modified with polyurethane-paraffin wax nanocapsules and performance of bovine serum albumin and humic acid rejection

Membrane fouling is a serious handicap of membrane-based separation, as it reduces permeation flux and hence increases operational and maintenance expenses. Polyurethane-paraffin wax (PU/PW) nanocapsules were integrated into the polyethersulfone membrane to manufacture a composite membrane with higher antifouling and permeability performance against humic acid (HA) and bovine serum albumin (BSA) foulants. All manufactured membranes were characterized by scanning electron microscopy (SEM), scanning electron microscopy-energy dispersive spectrometry (SEM-EDS), and contact angle. The contact angle of the pristine polyethersulfone (PES) membrane was measured 73.40 ± 1.32. With the embedding of nanocapsules, the contact angle decreased to 64.55 ± 1.23 for PES/PU/PW 2.0 wt%, and the pure water flux of all composite membranes increased when compared to pristine PES. The pristine PES membrane also has shown the lowest steady-state fluxes at 45.84 and 46.59 L/m2h for BSA and HA, respectively. With the increase of PU/PW nanocapsule ratio from 0.5 to 1.0 wt%, steady-state fluxes increased from 51.96 to 71.61 and from 67.87 to 98.73 L/m2h, respectively, for BSA and HA. The results depicted that BSA and HA rejection efficiencies of PU/PW nanocapsules blended PES membranes increased when compared to pristine PES membranes.

Effects of humic acids on the adsorption of Pb(II) ions onto biofilm-developed microplastics in aqueous ecosystems

Microplastics (MPs), as emerging contaminants can behave as carriers for heavy metals in the water environments. Although the adsorption performance of heavy metals on MPs has been widely investigated, the effects of humic acids (HA) on the adsorption have seldom been explored. The authors were compared the Pb(II) adsorption onto biofilm-developed polyvinyl chloride (Bio-PVC) MPs with Pb(II) adsorption onto virgin PVC MPs (V-PVC), and explored the relationship between surface characteristics and the adsorption properties in the coexistence of HA. Our results showed that due to a larger specific surface area and more oxygen containing groups, Bio-PVC had a larger adsorption capability with a value of 3.57 mg/g than original ones (1.85 mg/g) due to its huge specific surface area and more oxygen containing groups. Microbial community analysis showed that the predominate bacteria in biofilms as Proteobacteria, Acidobacteria, Cyanobacteria, Firmicutes, and Bacteroidetes. Notably, the Pb(II) adsorption onto the V-PVC surfaces was increased, but the adsorption capacities of Pb(II) on Bio-PVC were suppressed with increasing HA. With the co-existence of HA, the increasing complexation and electrostatic attraction had attributed to the increased Pb(II) adsorption ability on V-PVC. Except for its competitive ability, HA has a shield effect which decreases the sorption sites on Bio-PVC. Overall, our findings provide a better understanding of the HA effect on the adsorption mechanism of heavy metals onto MPs in aquatic ecosystems.

Seasonal Changes in Qualitative and Quantitative Characteristics of Humic Substances in Waters of Different Genesis: Membrane Technologies and Equilibrium Processes

Membrane filtration methods were applied in this study to research natural waters specification (and speciation). Lysimetric waters (soil waters) of background territories in different seasons are considered. Features of the change in molecular weights, elemental composition, and zeta potential of organic matter during fractionation from 8 μm to 100 kDa were found. The number of labile and non-labile speciation of some elements obtained by membrane filtration and ion-exchange separation methods were found and compared. The highest molecular weights of organic substances were found in summer samples of lysimetric waters (more than 100 kDa) with a predominance of the aromatic component in the IR spectra of the samples. Several maxima were also found in the molecular weight distribution, including the increase in autochthonous organic substances. The most stable negative zeta potential, as a stabilized colloid matter, are represented in summer (near -26 mV) and in autumn (near -22 mV) lysimetric water. A slight increase in metal ions bound into organic complexes is typical for summer and autumn samples.

Measurement of lead complexation by humic acids and humic acid analogues using competitive ligand exchange

In soil and water, metal complexation by humic substances has been demonstrated to have great importance in determining the bioavailability of many trace metals including lead. The binding of lead by humic acids has important implications for lead toxicity, and remediation. In this study we demonstrate the use of 4-(2-pyridylazo)-resorcinol (PAR) as a competitive ligand for the purposed of determining sorption isotherms for Pb²⁺ on humic acids and humic acid analogs. Equilibration rates at pH 8 were very rapid and the sorption isotherms measured were fit to the Langmuir isotherm equation and values for the stability constants (K_HA) and complexing site concentrations (L_t) are reported. At a PAR concentration of 0.24 mM and humic acid concentrations of 25-200 mg/L, the mass normalized log K_HA values for the humic substances ranged from 7.2 to 7.9, while the log L_t values ranged from -2.8 to -3.8. At lower PAR concentrations both K_HA and L_t tended to increase in magnitude indicating the role of the PAR concentration in establishing the measurement window for the interaction of Pb²⁺ with humic materials.

Effects of soil colloids on the aggregation and degradation of engineered nanoparticles (Ti3C2Tx MXene)

Soil colloid is a nonnegligible factor when evaluating the environmental risk of engineered nanoparticles (ENPs) in the groundwater. In this study, the environmental fate of an emerging ENP (Ti₃C₂T_x MXene) in the groundwater was investigated for the first time, which currently poses a severe environmental risk due to its cytotoxicity but has received little attention. The colloidal dispersion stability and degradation kinetics of Ti₃C₂T_x MXene in the groundwater were evaluated by considering the effects of soil colloids prepared from sodium humate (SH), montmorillonite (MT), and a natural soil (NS) under variable solution chemistry. The results showed that the affinity of soil colloids with Ti₃C₂T_x followed an SH > MT > NS sequence. Increasing SH concentration led to Ti₃C₂T_x disaggregation by enhancing the electrical and steric repulsive forces, while MT and NS resulted in hetero-aggregation because of the elevated collision frequency. SH and MT enhanced the critical coagulation concentrations of Ti₃C₂T_x by 100 and 10 folders, respectively, via surface coating process, while NS slightly reduced due to the bridging effects induced by the soluble cations. The soil colloids promoted Ti₃C₂T_x degradation compared with their absence and in an SH > MT ≫ NS sequence. SH and MT were through forming Ti-O-C and Si-O-Ti bonds with Ti₃C₂T_x via their carboxyl and hydroxyl groups, respectively, rendering the Ti₃C₂T_x surface more reactive and faster degradation. NS showed a weak promotion effect because of its less affinity with Ti₃C₂T_x and limited organic matter and clay contents with hydroxyl and carboxyl groups. This study demonstrated the unstable environmental behaviors of Ti₃C₂T_x in the groundwater and mitigated its environmental risk concerns.

Effects of Humic Substances on the Growth of Pseudomonas plecoglossicida 2,4-D and Wheat Plants Inoculated with This Strain

Both rhizosphere bacteria and humic substances (HSs) can promote plant growth when applied individually and even greater effects of their combination have been demonstrated. We aimed to elucidate the relative importance of the stimulating effects of HSs on bacterial growth and the effects of the combination of bacteria and HSs on plants themselves. The effects of humic (HA) and fulvic acids (FA) (components of humic substances) on the growth of Pseudomonas plecoglossicida 2,4-D in vitro were studied. We also studied the effects of this bacterial strain and HSs applied individually or in combination on the growth of wheat plants. Although the 2,4-D strain showed low ability to use HSs as the sole source of nutrition, the bacterial growth rate was increased by FA and HA, when other nutrients were available. HSs increased root colonization with bacteria, the effect being greater in the case of HA. The effects on roots and shoots increased when bacteria were associated with HSs. FA+ 2,4-D was more effective in stimulating shoot growth, while HA + 2,4-D was in the case of root growth. The latter effect is likely to be beneficial under edaphic stresses.

Quality and In Vivo Assessment of a Fulvic Acid Complex: A Validation Study

The present work aimed to re-assess the bioavailability enhancement potential of fulvic acid (FA). Carbamazepine (CBZ) and peat were used as a model drug and FA source, respectively. Our group has already evaluated the bioavailability enhancement potential of a less commercially viable source of FA, i.e., shilajit. In the present work, the phase solubility of CBZ was analyzed with varying concentrations of peat-sourced FA (2–12% w/v). The prepared complex (CBZ-FA) was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). Dissolution, pharmacokinetic, and pharmacodynamic studies were also carried out. The results showed the presence of an interaction between the drug and FA within the complex, which led to 98.99 ± 2.0% enhancement in drug solubility. The results also showed 79.23 ± 2.1% dissolution of the complexed drug over 60 min and 69.32 ± 2.2% permeation from the intestinal gut sac over 90 min, which led to a significant enhancement of bioavailability and a reduction in the duration of epileptic seizures. Thus, this study re-authenticates our earlier results and suggests switching the FA source (shilajit to peat) for commercial product development.

Biochar increases soil carbon pools: Evidence from a global meta-analysis

Biochar is a carbon-rich material that increases soil C sequestration and mitigates climate change. However, due to the variability of experimental conditions, types of biochar and soil, the influence of biochar on the accumulation of different soil carbon fractions remains unclear. Therefore, a meta-analysis was performed that included 586 paired comparisons obtained from 169 studies conducted in various countries around the globe. The data set average showed significant relative increases of 64.3, 84.3, 20.1, 22.9 and 42.1% for total C, organic C, microbial biomass C, labile C and fulvic acid, respectively. The dissolved organic C, humic acid and humin fractions showed no significant variations. The relative increase in TC was favored by increasing biochar rates applied to fine-textured soils with low C content in temperate climate regions seen through short-term experiments conducted under controlled conditions. This behavior was different for each soil C fraction. Therefore, variations between experimental conditions, types of biochar and soil show that it is necessary to consider multiple factors when choosing the conditions of biochar use to maximize C sequestration in the soil and/or the increase of labile C fractions in the soil.

The Effect of Supramolecular Humic Acids on the Diffusivity of Metal Ions in Agarose Hydrogel

Humic acids are known as natural substances of a supramolecular nature. Their self-assembly ability can affect the migration of heavy metals and other pollutants in nature. The formation of metal-humic complexes can decrease their mobility and bioavailability. This study focuses on metal ions diffusion and immobilization in humic hydrogels. Humic acids were purchased from International Humic Substances Society (isolated from different matrices—peat, soil, leonardite, water) and extracted from lignite mined in Czech Republic. Copper(II) ions were chosen as a model example of reactive metals for the diffusion experiments. The model of instantaneous planar source was used for experimental data obtained from monitoring the time development of copper(II) ions distribution in hydrogel. The effective diffusion coefficients of copper(II) ions showed the significant dependence on reaction ability of humic hydrogels. Lower amounts of the acidic functional groups caused an increase in the effective diffusion coefficient. In general, diffusion experiments seem to act as a valuable method for reactivity mapping studies on humic substances.

Dissolution of Silver Nanoparticles in Stratified Estuarine Mesocosms and Silver Accumulation in a Simple Planktonic Freshwater Trophic Chain

The increasing presence of nanomaterials in consumer products has led the scientific community to study the environmental fate of these contaminants of emerging concern. Silver nanoparticles, used mainly for their antibacterial properties, are among the most common nanomaterials. Understanding their transformations and interactions with living organisms, especially under environmentally relevant conditions that can modify metal bioavailability, is a crucial step in the study of their impacts on aquatic ecosystems. In the present study, citrate-coated silver nanoparticles (20 nm; 10 µg/L) were added to the surface freshwater layer of mesocosms simulating a stratified estuary. The investigation by dialysis of the nanoparticle dissolution showed that a large amount of total silver was found in the freshwater layer (and a very low amount in the seawater layer) and that 5–15% was in the form of dissolved silver. These results indicate that the halocline, separating fresh water from seawater, acted as a strong density barrier limiting the sedimentation of the nanoparticles. A simple trophic chain, composed of the freshwater alga Chlamydomonas reinhardtii and the invertebrate Daphnia magna, was used to determine silver bioavailability. This study suggests that citrate-coated silver nanoparticles do not significantly contribute to Ag accumulation by algae but may do so for invertebrates.

Stable Cu Isotope Ratios Show Changes in Cu Uptake and Transport Mechanisms in Vitis vinifera Due to High Cu Exposure

Even though copper (Cu) is an essential plant nutrient, it can become toxic under certain conditions. Toxic effects do not only depend on soil Cu content, but also on environmental and physiological factors, that are not well understood. In this study, the mechanisms of Cu bioavailability and the homeostasis of Vitis vinifera L. cv. Tannat were investigated under controlled conditions, using stable Cu isotope analysis. We measured Cu concentrations and δ⁶⁵Cu isotope ratios in soils, soil solutions, roots, and leaves of grapevine plants grown on six different vineyard soils, in a 16-week greenhouse experiment. The mobility of Cu in the soil solutions was controlled by the solubility of soil organic matter. No direct relationship between Cu contents in soils or soil solutions and Cu contents in roots could be established, indicating a partly homeostatic control of Cu uptake. Isotope fractionation between soil solutions and roots shifted from light to heavy with increasing Cu exposure, in line with a shift from active to passive uptake. Passive uptake appears to exceed active uptake for soil solution concentrations higher than 270 μg L^-1. Isotope fractionation between roots and leaves was increasingly negative with increasing root Cu contents, even though the leaf Cu contents did not differ significantly. Our results suggest that Cu isotope analysis is a sensitive tool to monitor differences in Cu uptake and translocation pathways even before differences in tissue contents can be observed.

New insight into the adsorption mechanism of PCP by humic substances with different degrees of humification in the presence of Cr(VI)

Humic substances (HSs) have great retention effects on pentachlorophenol (PCP) migration in subsurface environment, but the adsorption mechanism of PCP by HSs with various aromatic/aliphatic moieties and acidic functional groups in the presence of Cr(VI) is still unclear. In this study, the adsorption mechanism of PCP by undissolved humic acid (HA) and humin (HM) extracted from peat, black soil, lignite and coal was investigated under the presence of Cr(VI). According to the results, HA samples had much lower adsorption capacity for hydrophobic PCP than HM samples due to their higher contents of hydrophilic polar oxygen-containing functional groups. In respect to PCP adsorption mechanism, the molecular unsaturation of HSs associated with humification degree was found to be the determinant instead of polarity. Notably, after reacting with Cr(VI), significant decreasing of PCP adsorption quantities occurred on HSs extracted from lignite and coal with higher degrees of unsaturation (H/C < 0.64), while HSs extracted from peat and black soil with lower degrees of unsaturation (H/C > 0.83) kept almost unchanged, which can be attributed to the much higher reactivity of aromatic domains of HSs for Cr(VI) reduction compared with aliphatic moieties. This indicated that the adsorption mechanism of PCP by HSs with higher and lower degrees of unsaturation might be respectively driven by π-π interaction and hydrophobic interaction. This study highlighted the diverse adsorption mechanisms of PCP on HSs with different degrees of humification, and emphasized the coexisting Cr(VI) only have significant effect on PCP adsorption by HSs with higher humification degrees instead of the lower ones.

Combined supplementation of sodium humate and glutamine reduced diarrhea incidence of weaned calves by intestinal microbiota and metabolites changes

This study was conducted to investigate the effects of combined supplementation of sodium humate (HNa) and glutamine (Gln) on growth performance, diarrhea incidence, serum parameters, intestinal microbiome, and metabolites of weaned calves. In Exp. 1, 40 calves were randomly assigned to four treatments: 1) NC (negative control, basal diet), 2) 1% H+1% G (basal diet extra orally gavaged with 1 g of HNa and 1 g of Gln daily), 3) 3% H+1% G (basal diet extra orally gavaged with 3 g of HNa and 1 g of Gln daily), and 4) 5% H+1% G (basal diet extra orally gavaged with 5 g of HNa and 1 g of Gln daily). The HNa and Gln were together mixed with 100 mL of milk replacer (51 to 58 d of age) or water (59 to 72 d of age) and orally administrated to each calf from a bottle before morning feeding. In a 21-d trial, calves on the 5% HNa+1% Gln group had higher (P < 0.05) average daily gain (ADG) and lower (P < 0.05) diarrhea incidence than those in the control group. In Exp. 2, 20 calves were randomly assigned to two treatments fed with a basal diet and a basal diet supplemented with 100 mL of 5% HNa+1% Gln. In a 21-d trial, calves supplemented with HNa and Gln had higher (P < 0.05) ADG, IgG concentration and glutathione peroxidase (GSH-Px), and total antioxidant capacity (T-AOC) activities in the serum, but lower (P < 0.05) diarrhea incidence, as well as serum diamine oxidase (DAO), D-isomer of lactic acid (D-lac), tumor necrosis factor-α (TNF-α), and malondialdehyde (MDA) concentrations compared with control group. Results of intestinal microbiota indicated that supplementation with HNa and Gln significantly increased (P < 0.05) the abundance of intestinal beneficial microbiota. Moreover, supplementation with HNa and Gln altered 18 metabolites and enriched 6 Kyoto Encyclopedia of Genes and Genomes pathways in weaned calves. In conclusion, combined supplementation with HNa and Gln could decrease diarrhea incidence of weaned calves via altering intestinal microbial ecology and metabolism profile.

Sewage sludge and solid residues from biogas production derived biochar as an effective bio-waste adsorbent of fulvic acids from water or wastewater

Due to environmental concern, direct utilization of sewage sludge or residues from biogas production is restricted. Conversion of problematic bio-wastes into biochars can be a very effective solution. In the presented study, the adsorption of fulvic acids onto series of biochars produced from bio-wastes such as sewage sludge, residues from biogas production, and plant (Miscanthus sp.) were performed to examine the behavior of biochars in the environment and interactions with fulvic acids as the representatives of dissolved organic matter. The results clearly indicate that the highest excess of fulvic acids, 93-96 mg g^-1, was chemisorbed onto biochar obtained specifically from sewage sludge. The mechanism of the adsorption was independent from applied biochar feedstock. Monolayer coverage was dominant onto all biochars. Generally, adsorption was assumed to be controlled by polar interactions between fulvic acids and the biochars or pre-adsorbed and residual fulvic acids molecules (which were dominant) and the strong π-π interactions. The obtained high values of the adsorption capacity of sewage sludge derived biochars confirmed that thermal treatment is a very effective tool of bio-waste management.

Role of extracellular polymeric substances in leaching and bioconcentration of benzophenone-3 from microplastic fragments

Adverse effects of microplastics (MPs) are exacerbated by plastic additives such as benzophenone-3 (BP-3). The aim of the present study was to evaluate the role of extracellular polymeric substances (EPS) of Chlorella vulgaris in leaching BP-3 additive (3.0 ± 0.2% wt/wt) from polyethylene MP fragments (99.8 ± 4.1 µm) and subsequent bioconcentration in Daphnia magna. BP-3 leaching in M4 medium was higher at pH 8 than at pH 6, because of the higher solubility of BP-3 (pK_a=7.07) at pH 8. However, EPS reduced BP-3 leaching in M4 medium, possibly because of repulsive interactions between the negatively charged EPS and anionic BP-3. Thus, BP-3 leaching was greater at lower pH (6 >8) and EPS concentration (20 >50 mg L^-1 as total organic carbon), which was well related to BP-3 sorption capacity of EPS. Although BP-3 uptake in D. magna was decreased at pH 8 by increasing EPS concentration, the bioconcentration of BP-3 in D. magna was increased, possibly because of reduced BP-3 elimination. These findings suggest the important role of EPS in the bioconcentration of anionic plastic additives, which should be further evaluated to understand the underlying toxicokinetic mechanisms.

Determination of Organic Compounds, Fulvic Acid, Humic Acid, and Humin in Peat and Sapropel Alkaline Extracts

Black, brown, and light peat and sapropel were analyzed as natural sources of organic and humic substances. These specific substances are applicable in industry, agriculture, the environment, and biomedicine with well-known and novel approaches. Analysis of the organic compounds fulvic acid, humic acid, and humin in different peat and sapropel extracts from Lithuania was performed in this study. The dominant organic compound was bis(tert-butyldimethylsilyl) carbonate, which varied from 6.90% to 25.68% in peat extracts. The highest mass fraction of malonic acid amide was in the sapropel extract; it varied from 12.44% to 26.84%. Significant amounts of acetohydroxamic, lactic, and glycolic acid derivatives were identified in peat and sapropel extracts. Comparing the two extraction methods, it was concluded that active maceration was more efficient than ultrasound extraction in yielding higher amounts of organic compounds. The highest amounts of fulvic acid (1%) and humic acid and humin (15.3%) were determined in pure brown peat samples. This research on humic substances is useful to characterize the peat of different origins, to develop possible aspects of standardization, and to describe potential of the chemical constituents.

Solution-state NMR evaluation of molecular interaction between monoaromatic carboxylic acids and dissolved humic acid

Understanding the nature of interactions between the aromatic organic pollutants with dissolved humic acid (HA) is fundamental for the prediction of their environmental fate and subsequent development of efficient remediation methods. The present study employs solution-state ¹H/¹⁹F NMR methods to investigate the non-covalent interaction between aqueous peat humic acid (Aldrich HA) and monoaromatic carboxylic acids (CA), viz., 2, 6 diflourobenzoic acid (DFBA) and its non-fluorinated analog, benzoic acid (BA). NMR self-diffusion measurement of HA protons confirmed micellar nature indicating possibility of encapsulation of small molecules through host-guest interaction. ¹⁹F-¹H and ¹H-¹H saturation transfer difference (STD) experiments reveal the mode of insertion of CA into HA superstructure. The strength of interaction has been evaluated by analyzing T₁/T₂ relaxation times and self-diffusion coefficients of CA as a function of HA concentration. Association constants extracted for CA-HA complexes from NMR diffusion experiments reflected that the association between DFBA-HA (2.34 mM^-1) is significantly higher than that of BA-HA (0.97 mM^-1). The experimental outcome reiterated that substitution of -H with halogen atoms (-F in specific) to aromatic ring plays a dominant role in modulating the strength of association and mode of insertion of organic pollutants into HA superstructure. The present study emphasizes that AHA can be a potential remediating agent for organic contaminants due to its superior binding affinity compared to less humified extracted HA (EHA) from Karwar, Rajasthan, India.

Selective removal of pharmaceuticals and personal care products from water by titanium incorporated hierarchical diatoms in the presence of natural organic matter

Natural organic matter (NOM), such as humic acids, fulvic acids, and tannic acids, is ubiquitous in water bodies and hinders the photodegradation of pharmaceuticals and personal care products (PPCPs). We prepared titanium incorporated hierarchical diatoms as a novel photocatalyst to selectively remove PPCPs (triclosan, bisphenol A or BPA, and N, N-Diethyl-meta-toluamide or DEET) in the presence of NOM (humic acid). Diatom (Stephanodiscus hantzschii) grown in a titanium(IV) bis(ammonium lactato) dihydroxide solution integrated 7.2% ± 1.4% (mass fraction) of titanium in their cell wall and formed silica-titania frustules. The photodegradation of triclosan, BPA, and DEET by both silica-titania frustules and titania nanopowder (a control photocatalyst) follows pseudo-first-order kinetics. Under ultraviolent light irradiation, the titanium-content-normalized pseudo-first-order removal rate constants of triclosan, BPA, and DEET by silica-titania frustules were 3, 4, and 4-times those by titania nanopowder, respectively, at a humic acid concentration of 10 mg•L^-1. Incorporation of titanium did not alter the morphology and hierarchical nano/microstructures of the diatom. The silica-titania frustules were rich in nanopores with a diameter of 20 ± 4 nm (mean ± standard deviation), allowing PPCPs with a small molecular weight (typically < 600 g•mol^-1) to pass through while efficiently rejecting NOM with high molecular weights. The silica-titania frustules with hierarchical nano/microstructures served as a prefiltration unit by selectively allowing PPCPs to pass through the nanopores and are therefore promising for photodegradation and environmental remediation applications.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

How the Supramolecular Nature of Lignohumate Affects Its Diffusion in Agarose Hydrogel

Lignohumate, as an industrially produced analog of natural humic substances, is studied from the point of view of its diffusion properties. This work focuses on its permeation ability, important in agricultural and horticultural applications, connected with its penetration into plant organs as leaves and roots. The hydrogel based on agarose was used as a model material for the diffusion of lignohumate. Two types of experiments were realized: the diffusion of lignohumate in the hydrogel diffusion couple and the diffusion of lignohumate from its solution into hydrogel. The diffusion coefficient of lignohumate in the hydrogel was determined and used for the modelling of the time development of concentration profiles. It was found that the model agrees with experimental data for short times but an accumulation of lignohumate in front of the interface between donor and acceptor hydrogels was observed after several days. The particle size distribution of lignohumate and changes in the E₄/E₆ ratio used as an indicator of molecular weight of humic substances were determined. The results showed that the supramolecular structure of lignohumate can react sensitively to actual changes in its environs and thus affect their mobility and permeability into different materials. A filtration effect at the interface can be observed as an accompanying phenomenon of the re-arrangement in the lignohumate secondary structure.

Co-addition of humic substances and humic acids with urea enhances foliar nitrogen use efficiency in sugarcane (Saccharum officinarum L.)

Humic substances (HS) and humic acids (HA) are proven to enhance nutrient uptake and growth in plants. Foliar application of urea combined with HS and HA offers an alternative strategy to increase nitrogen use efficiency (NUE). The objective of this study was to understand the effects of foliar application of HA and HS along with urea on NUE and response of different biometric, biochemical and physiological traits of sugarcane with respect to cultivar, mode of foliar application, geographic location and intervals of foliar application. To study this, two different independent Experiments were conducted in green house facilities at two different agro-climatic zones (USA and Brazil) using two different predominant varieties, modes and intervals of foliar applications. The three different foliar applications used in this study were (1) urea (U), (2) mixture of urea and HS (U+HS) and (3) HA (U+HA). In both Experiments, ¹⁵N (nitrogen isotope) recovery or NUE was higher in U+HS followed by U+HA. However, magnitude of NUE changed according to the differences in two Experiments. Results showed that foliar application of U+HS and U+HA was rapidly absorbed and stored in the form of protein and starch. Also induced changes in photosynthesis, intrinsic water use efficiency, protein, total soluble sugars and starch signifying a synergistic effect of U+HS and U+HA on carbon and nitrogen metabolism. These results showed promising use of HS and HA with urea to improve NUE in sugarcane compared to using the urea alone. Simultaneously, mode, quantity, and interval of foliar application should be standardized based on the geographic locations and varieties to optimize the NUE.

An acidic-groups detection method and its application to analysis of Chinese humic acid samples

The method of non-aqueous conductivity titration (NACT) of organic weak acids was applied to quickly and accurately determine the phenolic-hydroxyl and carboxyl-groups contents in humic acid. By varying the pH of the humic-acid sample, the concentration of the titrant, and the nitrogen-gas flow rate, the optimal titration conditions were determined to be a sample pH of 4, titrant concentration of 0.05 mol/L, and nitrogen-gas flow rate of 80 mL/min. Applying the detection method to p-hydroxybenzoic acid showed that its phenolic-hydroxyl content was 758.82±111.76 cmol/kg and carboxyl content was 744.44±51.11 cmol/kg. The theoretical phenolic-hydroxyl and carboxyl-groups contents of the p-hydroxybenzoic acid were 723.96 cmol/kg respectively, indicating that the method can accurately quantify the carboxyl and phenolic-hydroxyl groups in the sample. The NACT was used to measure the phenolic-hydroxyl and carboxyl-groups contents in humic acid quickly and accurately. In addition, 29 humic acid samples from 8 provinces of China covering the main humic-acid producing areas were collected and analyzed for acidic-groups content using the reported method.

Characterization of coal-based fulvic acid and the construction of a fulvic acid molecular model

Fulvic acid (FA) is composed of many molecular units with similar characteristic structures. The characterization and molecular model construction of coal-based FA is the key for the scientific basis and applied science of FA.

The combined influence of hydrophobicity, charge and molecular weight on natural organic matter removal by ion exchange and coagulation

Three different source waters were investigated using virgin and pre-used anion exchange resins, coagulation, and ion exchange combined with coagulation (IEX&Coagulation). The hydrophobicity, size distribution and charge of natural organic matter (NOM) were used to evaluate its removal. Dissolved organic carbon (DOC) removal by pre-used IEX resin was 67-79%. A consistent ratio of different hydrophobicity fractions was found in the removed DOC, while the proportion and quantity of the molecular weight fraction around 1 kDa was important in understanding the treatability of water. For pre-used resin, organic compounds were hypothesised to be restricted to easily accessible exchange sites. Comparatively, virgin resin achieved higher DOC removals (86-89%) as resin fouling was absent. Charge density and the proportion of the hydrophobic fraction were found to be important indicators for the specific disinfection byproduct formation potential (DBP-FP). Treatment of raw water with pre-used resin decreased the specific DBP-FP by between 2 and 43%, while the use of virgin resin resulted in a reduction of between 31 and 63%. The highest water quality was achieved when the combination of IEX and coagulation was used, reducing DOC and the specific DBP-FP well below that seen for either process alone.