Nanoantibiotics: Functions and Properties at the Nanoscale to Combat Antibiotic Resistance

Narrow spectrum nano-antibiotic for selective removal of ARB from contaminated water: New insights into stimuli response based on cellular attachment, lysis, and excretion

Narrow spectrum nano-antibiotics are supposedly the future trouble-shooters to improve the efficacy of conventional antimicrobials for treatment of severe bacterial infections, remove contamination from water and diminish the development of antibiotic resistance. In this study, antimicrobial peptide functionalized boron-carbon-nitride nanosheets ((Ant)pep@BCN NSs) are developed that are a promising wastewater disinfector and antibiotic resistant bactericide agent. These nanosheets are developed for selective removal and effective inactivation of antibiotic resistant bacteria (ARB) from water in presence of two virulent bacteria. The (Ant)pep@BCN NSs provide reactive surface receptors specific to the ARB. They mimic muralytic enzymes to damage the cell membrane of ARB. These NSs demonstrate 3-fold higher antimicrobial efficiency against the targeted ARB compared to pristine BCN even at lower concentrations. To the best of our knowledge, this is the first time that functionalized BCN has been developed to remove ARB selectively from wastewater. Furthermore, the (Ant)pep@BCN selectively reduced the microbiological load and led to morphological changes in Gram negative ARB in a mixed bacterial inoculum. These ARBs excreted outer-inner membrane vesicles (OIMVs) of triangular shape as a stimuli response to (Ant)pep@BCN NSs. These novel antimicrobial peptide-NSs have potential to improve treatment efficacy against ARB infections and water contamination.

Levofloxacin loaded chitosan and poly-lactic-co-glycolic acid nano-particles against resistant bacteria: Synthesis, characterization and antibacterial activity

BACKGROUND

With the global increase in antibacterial resistance, the challenge faced by developing countries is to utilize the available antibiotics, alone or in combination, against resistant bacterial strains. We aimed to encapsulate the levofloxacin (LVX) into polymeric nanoparticles using biodegradable polymers i.e. Chitosan and PLGA, estimating their physicochemical characteristics followed by functional assessment as nanocarriers of levofloxacin against the different resistant strains of bacteria isolated from biological samples collected from tertiary care hospital in Lahore, Pakistan.

METHODS

LVX-NPs were synthesized using ion gelation and double emulsion solvent-evaporation method employing chitosan (CS) and poly-lactic-co-glycolic acid (PLGA), characterized via FTIR, XRD, SEM, and invitro drug release studies, while antibacterial activity was assessed using Kirby-Bauer disc-diffusion method.

RESULTS

Data revealed that the levofloxacin-loaded chitosan nanoparticles showed entrapment efficiency of 57.14% ± 0.03 (CS-I), 77.30% ± 0.08(CS-II) and 87.47% ± 0.08 (CS-III). The drug content, particle size, and polydispersity index of CS-I were 52.22% ± 0.2, 559 nm ± 31 nm, and 0.030, respectively, whereas it was 66.86% ± 0.17, 595 nm ± 52.3 nm and 0.057, respectively for CS-II and 82.65% ± 0.36, 758 nm ± 24 nm and 0.1, respectively for CS-III. The PLGA-levofloxacin nanoparticles showed an entrapment efficiency of 42.80% ± 0.4 (PLGA I) and 23.80% ± 0.4 (PLGA II). The drug content, particle size and polydispersity index of PLGA-I were 86% ± 0.21, 92 nm ± 10 nm, and 0.058, respectively, whereas it was 52.41% ± 0.45, 313 nm ± 32 nm and 0.076, respectively for PLGA-II. The XRD patterns of both polymeric nanoparticles showed an amorphous nature. SEM analysis reflects the circular-shaped agglomerated nanoparticles with PLGA polymer and dense spherical nanoparticles with chitosan polymer. The in-vitro release profile of PLGA-I nanoparticles showed a sustained release of 82% in 120 h and it was 58.40% for CS-III. Both types of polymeric nanoparticles were found to be stable for up to 6 months without losing any major drug content. Among the selected formulations, CS-III and PLGA-I, CS-III had better antibacterial potency against gram+ve and gram-ve bacteria, except for K. pneumonia, yet, PLGA-I demonstrated efficacy against K. pneumonia as per CSLI guidelines. All formulations did not exhibit any signs of hemotoxicity, nonetheless, the CS-NPs tend to bind on the surface of RBCs.

CONCLUSION

These data suggested that available antibiotics can effectively be utilized as nano-antibiotics against resistant bacterial strains, causing severe infections, for improved antibiotic sensitivity without compromising patient safety.

Unleashing the promise of emerging nanomaterials as a sustainable platform to mitigate antimicrobial resistance

The emergence and spread of antibiotic-resistant (AR) bacterial strains and biofilm-associated diseases have heightened concerns about exploring alternative bactericidal methods. The WHO estimates that at least 700 000 deaths yearly are attributable to antimicrobial resistance, and that number could increase to 10 million annual deaths by 2050 if appropriate measures are not taken. Therefore, the increasing threat of AR bacteria and biofilm-related infections has created an urgent demand for scientific research to identify novel antimicrobial therapies. Nanomaterials (NMs) have emerged as a promising alternative due to their unique physicochemical properties, and ongoing research holds great promise for developing effective NMs-based treatments for bacterial and viral infections. This review aims to provide an in-depth analysis of NMs based mechanisms combat bacterial infections, particularly those caused by acquired antibiotic resistance. Furthermore, this review examines NMs design features and attributes that can be optimized to enhance their efficacy as antimicrobial agents. In addition, plant-based NMs have emerged as promising alternatives to traditional antibiotics for treating multidrug-resistant bacterial infections due to their reduced toxicity compared to other NMs. The potential of plant mediated NMs for preventing AR is also discussed. Overall, this review emphasizes the importance of understanding the properties and mechanisms of NMs for the development of effective strategies against antibiotic-resistant bacteria.

From Polymeric Nanoformulations to Polyphenols-Strategies for Enhancing the Efficacy and Drug Delivery of Gentamicin

Gentamicin is an essential broad-spectrum aminoglycoside antibiotic that is used in over 40 clinical conditions and has shown activity against a wide range of nosocomial, biofilm-forming, multi-drug resistant bacteria. Nevertheless, the low cellular penetration and serious side effects of gentamicin, as well as the fear of the development of antibacterial resistance, has led to a search for ways to circumvent these obstacles. This review provides an overview of the chemical and pharmacological properties of gentamicin and offers six different strategies (the isolation of specific types of gentamicin, encapsulation in polymeric nanoparticles, hydrophobization of the gentamicin molecule, and combinations of gentamicin with other antibiotics, polyphenols, and natural products) that aim to enhance the drug delivery and antibacterial activity of gentamicin. In addition, factors influencing the synthesis of gentamicin-loaded polymeric (poly (lactic-co-glycolic acid) (PLGA) and chitosan) nanoparticles and the methods used in drug release studies are discussed. Potential research directions and future perspectives for gentamicin-loaded drug delivery systems are given.

Harnessing the potential of bimetallic nanoparticles: Exploring a novel approach to address antimicrobial resistance

The growing global importance of antimicrobial resistance (AMR) in public health has prompted the creation of innovative approaches to combating the issue. In this study, the promising potential of bimetallic nanoparticles (BMNPs) was investigated as a novel weapon against AMR. This research begins by elaborating on the gravity of the AMR problem, outlining its scope in terms of the effects on healthcare systems, and stressing the urgent need for novel solutions. Because of their unusual features and wide range of potential uses, bimetallic nanoparticles (BMNPs), which are tiny particles consisting of two different metal elements, have attracted a lot of interest in numerous fields. This review article provides a comprehensive analysis of the composition, structural characteristics, and several synthesis processes employed in the production of BMNPs. Additionally, it delves into the unique properties and synergistic effects that set BMNPs apart from other materials. This review also focuses on the various antimicrobial activities shown by bimetallic nanoparticles, such as the rupturing of microbial cell membranes, the production of reactive oxygen species (ROS), and the regulation of biofilm formation. An extensive review of in vitro studies confirms the remarkable antibacterial activity of BMNPs against a variety of pathogens and sheds light on the dose-response relationship. The efficacy and safety of BMNPs in practical applications are assessed in this study. It also delves into the synergistic effects of BMNPs with traditional antimicrobial drugs and their ability to overcome multidrug resistance, providing mechanistic insight into these phenomena. Wound healing, infection prevention, and antimicrobial coatings on medical equipment are only some of the clinical applications of BMNPs that are examined, along with the difficulties and possible rewards of clinical translation. This review covers nanoparticle-based antibacterial regulation and emerging uses. The essay concludes with prospects for hybrid systems, site-specific targeting, and nanoparticle-mediated gene and drug delivery. In summary, bimetallic nanoparticles have surfaced as a potential solution, offering the public a more promising and healthier future.

Innovative Biomedical and Technological Strategies for the Control of Bacterial Growth and Infections

Antibiotics comprise one of the most successful groups of pharmaceutical products. Still, they have been associated with developing bacterial resistance, which has become one of the most severe problems threatening human health today. This context has prompted the development of new antibiotics or co-treatments using innovative tools to reverse the resistance context, combat infections, and offer promising antibacterial therapy. For the development of new alternatives, strategies, and/or antibiotics for controlling bacterial growth, it is necessary to know the target bacteria, their classification, morphological characteristics, the antibiotics currently used for therapies, and their respective mechanisms of action. In this regard, genomics, through the sequencing of bacterial genomes, has generated information on diverse genetic resources, aiding in the discovery of new molecules or antibiotic compounds. Nanotechnology has been applied to propose new antimicrobials, revitalize existing drug options, and use strategic encapsulating agents with their biochemical characteristics, making them more effective against various bacteria. Advanced knowledge in bacterial sequencing contributes to the construction of databases, resulting in advances in bioinformatics and the development of new antimicrobials. Moreover, it enables in silico antimicrobial susceptibility testing without the need to cultivate the pathogen, reducing costs and time. This review presents new antibiotics and biomedical and technological innovations studied in recent years to develop or improve natural or synthetic antimicrobial agents to reduce bacterial growth, promote well-being, and benefit users.

Antibiotic action and resistance: updated review of mechanisms, spread, influencing factors, and alternative approaches for combating resistance

Antibiotics represent a frequently employed therapeutic modality for the management of bacterial infections across diverse domains, including human health, agriculture, livestock breeding, and fish farming. The efficacy of antibiotics relies on four distinct mechanisms of action, which are discussed in detail in this review, along with accompanying diagrammatic illustrations. Despite their effectiveness, antibiotic resistance has emerged as a significant challenge to treating bacterial infections. Bacteria have developed defense mechanisms against antibiotics, rendering them ineffective. This review delves into the specific mechanisms that bacteria have developed to resist antibiotics, with the help of diagrammatic illustrations. Antibiotic resistance can spread among bacteria through various routes, resulting in previously susceptible bacteria becoming antibiotic-resistant. Multiple factors contribute to the worsening crisis of antibiotic resistance, including human misuse of antibiotics. This review also emphasizes alternative solutions proposed to mitigate the exacerbation of antibiotic resistance.

Poly(ethylene glycol) Methyl Ether Acrylate-Grafted Chitosan-Based Micro- and Nanoparticles as a Drug Delivery System for Antibiotics

Nanotechnology is the science of creating materials at the nanoscale by using various devices, structures, and systems that are often inspired by nature. Micro- and nanoparticles (MPs, NPs) are examples of such materials that have unique properties and can be used as carriers for delivering drugs for different biomedical applications. Chitosan (CS) is a natural polysaccharide that has been widely studied, but it has a problem with low water solubility at neutral or basic pH, which limits its processability. The goal of this work was to use a chemically modified CS with poly(ethylene glycol) methyl ether acrylate (PEGA) to prepare CS micronic and submicronic particles (MPs/NPs) that can deliver different types of antibiotics, respectively, levofloxacin (LEV) and Ciprofloxacin (CIP). The particle preparation procedure employed a double crosslinking method, ionic followed by a covalent, in a water/oil emulsion. The studied process parameters were the precursor concentration, stirring speeds, and amount of ionic crosslinking agent. MPs/NPs were characterized by FT-IR, SEM, light scattering granulometry, and Zeta potential. MPs/NPs were also tested for their water uptake capacity in acidic and neutral pH conditions, and the results showed that they had a pH-dependent behavior. The MPs/NPs were then used to encapsulate two separate drugs, LEV and CIP, and they showed excellent drug loading and release capacity. The MPs/NPs were also found to be safe for cells and blood, which demonstrated their potential as suitable drug delivery systems for biomedical applications.

Lacticaseibacillus paracasei fermentation broth identified peptide, Y2Fr, and its antibacterial activity on Vibrio parahaemolyticus

Although Vibrio parahaemolyticus infections cause severe diseases of large yellow croaker (Larimichthys crocea), using antibiotics and other chemical agents to treat these infections could result in antimicrobial resistance, environmental pollution, and other associated problems. This study identified seven peptides from Lacticaseibacillus paracasei fermentation broth using ultra-high-performance liquid chromatography-mass spectrometry and screened antimicrobial peptide Y2Fr (VEIKNGLLKLNGKPLLIR) through its net charge, hydrophobicity and predicted secondary structure. Antibacterial activity analysis revealed that Y2Fr had a minimum inhibitory concentration (MIC) of 125 μg/mL, minimum bactericidal concentration (MBC) of 250 μg/mL against V. parahaemolyticus and a time-kill of 3 h. In a bacterial membrane environment, the secondary structure of peptide Y2Fr changed from a random coil to a β-sheet to enhance its membrane permeability and binding to bacteria DNA to exert its antibacterial effect. Further molecular docking analysis revealed that peptide Y2Fr could bind to the membrane protein KKI11460.1 and DNA polymerase A0A0L8TVA4 of V. parahaemolyticus through hydrogen bonds. Meanwhile, treatment of Y2Fr with mammalian red blood cells and plasma revealed that it was noncytotoxic, nonhemolytic, and stable under physiological conditions. Thus, peptide Y2Fr has great potential use in treating and preventing infections caused by V. parahaemolyticus or similar bacteria in aquatic animals.

Multidimensional applications and potential health implications of nanocomposites

This study reviews the concept, classifications, and techniques involved in the synthesis of nanocomposites. The environmental and health implications of nanoparticles and composite materials were detailed, as well as the applications of nanocomposites in water remediation, antibacterial application, and printed circuit boards. The study gave insights into the challenges of water pollution treatment and provided a broad list of nanocomposites that have been explored for water remediation. Moreover, the emergence of multi-drug resistance to many antibiotics has made current antibiotics inadequate in the treatment of disease. This has engineered the development of alternative strategies in the drug industries for the production of effective therapeutic agents, comprising nanocomposites with antibacterial agents. The new therapeutic agents known as nanoantibiotics are more efficient and have paved the way to handle the challenges of antibiotic resistance. In printed circuit boards, nanocomposites have shown promising applications because of their distinct mechanical, thermal, and electrical characteristics. The uniqueness of the write-up is that it provides a broad explanation of the concept, synthesis, application, toxicity, and harmful effects of nanocomposites. Thus, it will provide all-inclusive awareness to readers to identify research gaps and motivate researchers to synthesize novel nanocomposites for use in various fields.

Enhancing the Antibiotic Production by Thermophilic Bacteria Isolated from Hot Spring Waters via Ethyl Methanesulfonate Mutagenesis

Antibiotic-resistant bacteria represent a serious public health threat. For that reason, the development of new and effective antibiotics to control pathogens has become necessary. The current study aims to search for new microorganisms expressing antibiotic production capacity. Fifteen sites covering a wide range of harsh environmental conditions in Egypt were investigated. Two hundred and eighty bacterial isolates were obtained and then tested against pathogenic bacteria using the agar disk diffusion technique. Fifty-two (18.6% of the total) of the isolates exhibited antagonistic properties, which affected one or more of the tested pathogens. The isolate 113 was identified as Bacillus licheniformis and isolate 10 was identified as Brevibacillus borstelensis using the 16S rRNA technique. The B. licheniformis strain was stronger in antibiotic production against S. typhi, M. luteus, and P. ariginosa, whereas the strain Br. borstelensis was more efficient against B. cereus, E. coli, and Klebs. sp. The sensitivity of the strains to commercial antibiotics showed that B. licheniformis was highly sensitive to seven commercial antibiotics, whereas Br. borstelensis was sensitive to nine antibiotics. The two strains were subjected to ethyl methanesulfonate (EMS) mutagenesis to obtain mutants with a higher antibiotic production. The total bacterial count was measured after treatment with EMS mutagen and showed a significant gradual increase in the antimicrobial activity, which was achieved via shaking in the presence of EMS for 60 min. High antimicrobial activities were noted with 17 and 14 mutants from the B. licheniformis and Br. borstelensis strains, respectively. The mutant B. licheniformis (M15/Amo) was more active than the parent strain against S. aureus (212.5%), while the mutant Br. borstelensis (B7/Neo) was more effective against S. typhi (83.3%). The present study demonstrates the possibility of obtaining potent antibiotic-producing bacteria in hot spring waters and further improving the indigenous bacterial capacity to produce antibiotics by using EMS mutagenesis.

Fabrication of ZnO/Gypsum/Gelatine nanocomposites films and their antibacterial mechanism against Staphylococcus aureus

Staphylococcus aureus (S. aureus) has long been acknowledged as being one of the most harmful bacteria for human civilization. It is the main contributor to skin and soft tissue infections. The gram positive pathogen also contributes to bloodstream infections, pneumonia, or bone and joint infections. Hence, developing an efficient and targeted treatment for these illnesses is greatly desired. Recently, studies on nanocomposites (NCs) have significantly increased due to their potent antibacterial and antibiofilm properties. These NCs provide an intriguing way to control the growth of bacteria without causing the development of resistance strains that come from improper or excessive use of the conventional antibiotics. In this context, we have demonstrated the synthesis of a NC system by precipitation of ZnO nanoparticles (NPs) on Gypsum followed by encapsulation with Gelatine, in the present study. Fourier transform infrared (FTIR) spectroscopy was used to validate the presence of ZnO NPs and Gypsum. The film was characterized by X-ray diffraction (XRD) spectroscopy and scanning electron microscopy (SEM). The system exhibited promising antibiofilm action and was effective in combating S. aureus and MRSA in concentrations between 10 and 50 ug/ml. The bactericidal mechanism by release of reactive oxygen species (ROS) was anticipated to be induced by the NC system. Studies on cell survival and in-vitro infection support the film's notable biocompatibility and its potential for treating Staphylococcus infections in the future.

Exploring Nanotechnology as a Strategy to Circumvent Antimicrobial Resistance in Bone and Joint Infections

Bone and joint infections (BJIs) are difficult to treat, necessitating antimicrobial therapy at high doses for an extended period of time, in some cases different from our local guidelines. As a consequence of the rise in antimicrobial-resistant organisms, drugs that were previously reserved for last-line defense are now being used as first line treatment, and the pill burden and adverse effects on patients are leading to nonadherence, encouraging antimicrobial resistance (AMR) to these last-resort medicines. Nanodrug delivery is the field of pharmaceutical sciences and drug delivery which combines nanotechnology with chemotherapy and/or diagnostics to improve treatment and diagnostic outcomes by targeting specific cells or tissues affected. Delivery systems based on lipids, polymers, metals, and sugars have been used in an attempt to provide a way around AMR. This technology has the potential to improve drug delivery by targeting the site of infection and using the appropriate amount of antibiotics to treat BJIs caused by highly resistant organisms. This Review aims to provide an in-depth examination of various nanodrug delivery systems used to target the causative agents in BJI.

Machine learning in antibacterial discovery and development: A bibliometric and network analysis of research hotspots and trends

Machine learning (ML) methods are used in cheminformatics processes to predict the activity of an unknown drug and thus discover new potential antibacterial drugs. This article conducts a bibliometric study to analyse the contributions of leading authors, universities/organisations and countries in terms of productivity, citations and bibliographic linkage. A sample of 1596 Scopus documents for the period 2006-2022 is the basis of the study. In order to develop the analysis, bibliometrix R-Tool and VOSviewer software were used. We determined essential topics related to the application of ML in the field of antibacterial development (Computer model in antibacterial drug design, and Learning algorithms and systems for forecasting). We identified obsolete and saturated areas of research. At the same time, we proposed emerging topics according to the various analyses carried out on the corpus of published scientific literature (Title, abstract and keywords). Finally, the applied methodology contributed to building a broader and more specific "big picture" of ML research in antibacterial studies for the focus of future projects.

Ahmed E, Battah B, Abd Ellah NH, Zanetti S, Donadu MG. Nanotechnology as a Promising Approach to Combat Multidrug Resistant Bacteria: A Comprehensive Review and Future Perspectives

The wide spread of antibiotic resistance has been alarming in recent years and poses a serious global hazard to public health as it leads to millions of deaths all over the world. The wide spread of resistance and sharing resistance genes between different types of bacteria led to emergence of multidrug resistant (MDR) microorganisms. This problem is exacerbated when microorganisms create biofilms, which can boost bacterial resistance by up to 1000-fold and increase the emergence of MDR infections. The absence of novel and potent antimicrobial compounds is linked to the rise of multidrug resistance. This has sparked international efforts to develop new and improved antimicrobial agents as well as innovative and efficient techniques for antibiotic administration and targeting. There is an evolution in nanotechnology in recent years in treatment and prevention of the biofilm formation and MDR infection. The development of nanomaterial-based therapeutics, which could overcome current pathways linked to acquired drug resistance, is a hopeful strategy for treating difficult-to-treat bacterial infections. Additionally, nanoparticles' distinct size and physical characteristics enable them to target biofilms and treat resistant pathogens. This review highlights the current advances in nanotechnology to combat MDR and biofilm infection. In addition, it provides insight on development and mechanisms of antibiotic resistance, spread of MDR and XDR infection, and development of nanoparticles and mechanisms of their antibacterial activity. Moreover, this review considers the difference between free antibiotics and nanoantibiotics, and the synergistic effect of nanoantibiotics to combat planktonic bacteria, intracellular bacteria and biofilm. Finally, we will discuss the strength and limitations of the application of nanotechnology against bacterial infection and future perspectives.

Nanomaterials to address the genesis of antibiotic resistance in Escherichia coli

Escherichia is a genus of prokaryotic gram-negative bacteria which forms a vital component of the gut microbiota of homeotherms including humans. Many members of this genus are commensals and pathogenic strains, which are responsible for some of the most common bacterial infections and can be fatal, particularly in the case of newborns and children. The fecal matter in wastewater treatment plants serves as major environmental sinks for the accumulation of Escherichia. The rise in antibiotic pollution and the lateral gene exchange of antibiotic-resistant genes have created antibiotic-resistant Escherichia strains that are often called superbugs. Antibiotic resistance has reached a crisis level that nowadays existing antibiotics are no longer effective. One way of tackling this emerging concern is by using nanomaterials. Punitively, nanomaterials can be used by conjugating with antibodies, biomolecules, and peptides to reduce antibiotic usage, whereas, preventatively, they can be used as either nano-antimicrobial additives or nano-photocatalytic sheets to reduce the microbial population and target the superbugs of environmental Escherichia. In this review, we have explored the threat posed by pathogenic Escherichia strains in the environment, especially in the context of antibiotic-resistant strains. Along with this, we have discussed some nanomaterial-mediated strategies in which the problem can be addressed by using nanomaterials as nanophotocatalytics, antimicrobial additives, drugs, and drug conjugates. This review also presents a brief overview of the ecological threats posed by the overuse of nanomaterials which warrants a balanced and judicious approach to the problem.

Microenvironment-Adaptive Nanozyme for Accelerating Drug-Resistant Bacteria-Infected Wound Healing

Reactive oxygen species (ROS) are favorable for antibacterial infection but their overproduction results in serious inflammatory response and aggravates the hypoxic state of the wound tissue, which is detrimental to healing stages of proliferation and remodeling. Here, an atomic-dispersion Fe-doped oxygen-deficient molybdenum oxide MoO_{3- X} (ADFM) bifunctional nanozyme, featuring implanted peroxidase-like and enhanced catalase-like activity, is developed for decomposing H₂ O₂ into strongly oxidizing hydroxyl radicals (•OH) for prevention of bacterial infection and into plentiful O₂ for healing stages. Therein, the introduction of Fe into MoO_{3- X} primarily produces an asymmetric electron density difference by elongating the bond length between metal atoms, synchronously stabilizing adsorption of •OH and weakening the adsorption of O₂ . ADFM also shows unimaginably high aqueous dispersity and pH-adaptive ROS regulation in the wound microenvironment, both of which are favorable for ADFM to fully exert enzyme-like activity for timely antibacterial and efficient wound-healing action. ADFM thus achieves efficient healing of drug-resistant bacteria-infected wounds in vivo, at an ultralow dosage of 30 µg mL^-1 against 10⁶ CFU mL^-1 extended spectrum β-lactamases-producing Escherichia coli, exhibiting a wound-healing efficiency of ≈10 mm² per day, which sets a benchmark among these noble-metal-free nanozyme-based wound-healing agents.

Delivery of streptomycin to the rat colon by use of electrospun nanofibers

Drug-loaded electrospun nanofibers are potential drug carrier systems that may optimize disease treatment while reducing the impact on commensal microbes. The feasibility of streptomycin-loaded pullulan nanofibers fabricated from a green electrospinning procedure using water as the solvent was assessed. We conducted a rat study including a group treated with streptomycin-loaded nanofibers (STR-F, n = 5), a group treated with similar concentrations of streptomycin in the drinking water (STR-W, n = 5), and a non-treated control group (CTR, n = 5). Streptomycin was successfully loaded into nanofibers and delivered by this vehicle, which minimized the quantity of the drug released in the ileal compartment of the gut. Ingested streptomycin-resistant E. coli colonized of up to 10⁶ CFU/g feces, revealing a selective effect of streptomycin even when given in the low amounts allowed by the nanofiber-based delivery. 16S amplicon sequencing of the indigenous microbiota revealed differential effects in the three groups. An increase of Peptostreptococcaceae in the cecum of STR-F animals may indicate that the fermentation of nanofibers directly or indirectly promoted growth of bacteria within this family. Our results elucidate relevant properties of electrospun nanofibers as a novel vehicle for delivery of antimicrobials to the large intestine.

Influence of silver ion release on the inactivation of antibiotic resistant bacteria using light-activated silver nanoparticles

The widespread increase in antibiotic resistance (AR), in an extensive range of microorganisms, demands the development of alternative antimicrobials with novel non-specific low-mutation bacterial targets. Silver nanoparticles (AgNPs) and photosensitizers (PSs) are promising antimicrobial agents with broad-spectrum activity and low tendency for antimicrobial resistance development. Herein, we investigated the light-mediated oxidation of AgNPs for accelerated release of Ag⁺ in the antibacterial synergy of PS-AgNP conjugates using protoporphyrin IX (PpIX) as a PS. Also, the influence of polyethyleneimine (PEI) coated AgNPs in promoting antibacterial activity was examined. We synthesized, characterized and tested the antimicrobial effect of three nanoparticles: AgNPs, PpIX-AgNPs, and PEI-PpIX-AgNPs against a methicillin-resistant Staphylococcus aureus strain (MRSA) and a wild-type multidrug resistant (MDR) E. coli. PpIX-AgNPs were the most effective material achieving >7 log inactivation of MRSA and MDR E. coli. The order of bacterial log inactivation was PpIX-AgNPs > PEI-PpIX-AgNPs > AgNPs. This order correlates with the trend of Ag⁺ concentration released by the NPs (PpIX-AgNPs > PEI-PpIX-AgNPs > AgNPs). Our study confirms a synergistic effect between PpIX and AgNPs in the inactivation of AR pathogens with about 10-fold increase in inactivation of ARB relative to AgNPs only. The concentration of Ag⁺ released from NPs determined the log inactivation of MRSA and MDR E. coli more than either the phototoxic effect or the electrostatic interaction promoted by surface charge of nanoparticles with bacteria cells. All NPs showed negligible cytotoxicity to mammalian cells at the bacterial inhibitory concentration after 24 h exposure. These observations confirm the crucial role of optimized Ag⁺ release for enhanced performance of AgNP-based antimicrobials against AR pathogens.

Antiviral activity of nano-monocaprin against Phi6 as a surrogate for SARS-CoV-2

The COVID-19 pandemic involving SARS-CoV-2 has raised interest in using antimicrobial lipid formulations to inhibit viral entry into their host cells or to inactivate them. Lipids are a part of the innate defense mechanism against pathogens. Here, we evaluated the use of nano-monocaprin (NMC) in inhibiting enveloped (phi6) and unenveloped (MS2) bacteriophages. NMC was prepared using the sonochemistry technique. Size and morphology analysis revealed the formation of ~ 8.4 ± 0.2-nm NMC as measured by dynamic light scattering. We compared the antiviral activity of NMC with molecular monocaprin (MMC) at 0.5 mM and 2 mM concentrations against phi6, which we used as a surrogate for SARS-CoV-2. The synthesized NMC exhibited 50% higher antiviral activity against phi6 than MMC at pH 7 using plaque assay. NMC inactivated phi6 stronger at pH 4 than at pH 7. To determine if NMC is toxic to mammalian cells, we used MTS assay to assess its IC₅₀ for HPDE and HeLa cell lines, which were ~ 203 and 221 µM, respectively. NMC may be used for prophylactic application either as a drop or spray since many viruses enter the human body through the mucosal lining of the nose, eyes, and lungs.

Metabolomic Profiling of the Responses of Planktonic and Biofilm Vibrio cholerae to Silver Nanoparticles

Vibrio cholerae causes cholera and can switch between planktonic and biofilm lifeforms, where biofilm formation enhances transmission, virulence, and antibiotic resistance. Due to antibiotic microbial resistance, new antimicrobials including silver nanoparticles (AgNPs) are being studied. Nevertheless, little is known about the metabolic changes exerted by AgNPs on both microbial lifeforms. Our objective was to evaluate the changes in the metabolomic profile of V. cholerae planktonic and biofilm cells in response to sublethal concentrations of AgNPs using MS2 untargeted metabolomics and chemoinformatics. A total of 690 metabolites were quantified among all groups. More metabolites were significantly modulated in planktonic cells (n = 71) compared to biofilm (n = 37) by the treatment. The chemical class profiles were distinct for both planktonic and biofilm, suggesting a phenotype-dependent metabolic response to the nanoparticles. Chemical enrichment analysis showed altered abundances of oxidized fatty acids (FA), saturated FA, phosphatidic acids, and saturated stearic acid in planktonic cells treated with AgNPs, which hints at a turnover of the membrane. In contrast, no chemical classes were enriched in the biofilm. In conclusion, this study suggests that the response of V. cholerae to silver nanoparticles is phenotype-dependent and that planktonic cells experience a lipid remodeling process, possibly related to an adaptive mechanism involving the cell membrane.

Prominent bactericidal characteristics of silver-copper nanocomposites produced via pulse laser ablation

This paper reports the characterization and antibacterial performance evaluation of some spherical and stable crystalline silver (Ag)/copper (Cu) nanocomposites (Ag-CuNCs) prepared in deionized water (DIW) using pulse laser ablation in liquid (PLAL) method. The influence of various laser fluences (LFs) on the structural, morphological, optical and antibacterial properties of these NCs were determined. The UV-Vis absorbance of these NCs at 403 nm and 595 nm was gradually increased accompanied by a blue shift. XRD patterns disclosed the nucleation of highly crystalline Ag-CuNCs with their face centered cubic lattice structure. TEM images showed the existence of spherical NCs with size range of 3-20 nm and lattice fringe spacing of approximately 0.145 nm. EDX profiles of Ag-CuNCs indicated their high purity. The antibacterial effectiveness of the Ag-CuNCs was evaluated by the inhibition zone diameter (IZD) and optical density (OD600) tests against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. The proposed NCs revealed the IZD values in the range of 22-26 mm and 20-25 mm when tested against E. coli and S. aureus bacteria, respectively. The Ag-CuNCs prepared at LF of 14.15 J/cm² revealed the best bactericidal activity. It is established that by controlling the laser fluence the bactericidal effectiveness of the Ag-CuNCs can be tuned.

A metal–organic framework nanocomposite with oxidation and near-infrared light cascade response for bacterial photothermal inactivation

Photothermal treatment is an effective and precise bacterial disinfection method that can reduce the occurrence of bacterial drug resistance. However, most conventional photothermal treatment strategies have the problem that the photothermal response range does not match the infection area. Herein, a metal–organic framework (MOF) nanocomposite responding to the oxidation state of the bacterial infection microenvironment was constructed for near-infrared (NIR) photothermal bacterial inactivation. In this strategy, the MOF was used as a nanocarrier to load tetramethylbenzidine (TMB) and horseradish peroxidase (HPR). The high oxidation state of the bacterial infection microenvironment can trigger the enzyme-catalyzed reaction of the nanocomposite, thereby generating oxidation products with the NIR photothermal effect for bacterial disinfection. The synthesis and characterization of the nanocomposite, oxidation state (H₂O₂) response effect, photothermal properties, and antibacterial activities were systematically studied. This study provides a new idea for building a precision treatment system for bacterial infection.

Catalytic nanomedicine: a brief review of bionanocatalysts

Catalytic nanomedicine is a research area and source of disruptive technology that studies the application of bionanocatalysts (organically functionalized mesoporous nanostructured materials with catalytic properties) in diverse areas such as disinfection, tissue regeneration in chronic wounds and oncology. This paper reviews the emergence of catalytic nanomedicine in 2006, its basic principles, main achievements and future perspectives, as well as giving a summary of the knowledge gaps that need to be addressed to exploit the full potential of this novel discipline. This review intends to foster knowledge dissemination regarding catalytic nanomedicine, and to encourage further research to elucidate the mechanisms and possible applications of these nanomaterials.

Nickel Nanoparticles: Applications and Antimicrobial Role against Methicillin-Resistant Staphylococcus aureus Infections

Methicillin-resistant Staphylococcus aureus (MRSA) has evolved vast antibiotic resistance. These strains contain numerous virulence factors facilitating the development of severe infections. Considering the costs, side effects, and time duration needed for the synthesis of novel drugs, seeking efficient alternative approaches for the eradication of drug-resistant bacterial agents seems to be an unmet requirement. Nickel nanoparticles (NiNPs) have been applied as prognostic and therapeutic cheap agents to various aspects of biomedical sciences. Their antibacterial effects are exerted via the disruption of the cell membrane, the deformation of proteins, and the inhibition of DNA replication. NiNPs proper traits include high-level chemical stability and binding affinity, ferromagnetic properties, ecofriendliness, and cost-effectiveness. They have outlined pleomorphic and cubic structures. The combined application of NiNPs with CuO, ZnO, and CdO has enhanced their anti-MRSA effects. The NiNPs at an approximate size of around 50 nm have exerted efficient anti-MRSA effects, particularly at higher concentrations. NiNPs have conferred higher antibacterial effects against MRSA than other nosocomial bacterial pathogens. The application of green synthesis and low-cost materials such as albumin and chitosan enhance the efficacy of NPs for therapeutic purposes.

Nano-Enabled Chronic Wound Healing Strategies: Burn and Diabetic Ulcer Wounds

The human skin serves as the body’s first line of defense against the environment. Diabetes mellitus (DM) and 2nd–4th degree burns, on the other hand, affect the skin’s protective barrier features. Burn wounds, hypermetabolic state, and hyperglycemia compromise the immune system leading to chronic wound healing. Unlike acute wound healing processes, chronic wounds are affected by reinfections which can lead to limb amputation or death. The conventional wound dressing techniques used to protect the wound and provide an optimal environment for repair have their limitations. Various nanomaterials have been produced that exhibit distinct features to tackle issues affecting wound repair mechanisms. This review discusses the emerging technologies that have been designed to improve wound care upon skin injury. To ensure rapid healing and possibly prevent scarring, different nanomaterials can be applied at different stages of healing (hemostasis, inflammation, proliferation, remodeling).

Green synthesis, characterizations of silver nanoparticles using sumac (Rhus coriaria L.) plant extract and their antimicrobial and DNA damage protective effects

Today, antimicrobial resistance against bacteria has become an important global public health problem. In this sense, the development of new biomedical solutions is becoming increasingly important. Especially plant-based nanoparticles produced by green synthesis are used in many fields. AgNPs have an important place in nanoscience and nanotechnology, especially in nanomedicine. Therefore, the present study was conducted to synthesize AgNPs using the medicinal plant extract sumac and to characterize them using advanced techniques and to determine the antibacterial activity of some bacteria that cause disease. Nanoparticles produced by green synthesis are used in a wide area around the world due to their many advantages such as environmentally friendly, economically and non-toxically. In this study, AgNPs were biosynthesized using sumac extract and evaluated for their antibacterial potency against Bacillus cereus, Bacillus subtilis, Enterococcus faecalis, Pseudomonas aeruginos, and Candida albicans. UV-Vis spectroscopy of the prepared sumac-mediated silver solution showed the absorption maximum at about 400 nm. According to the TEM results obtained, it was observed that the particles were spherical, approximately 4 nm in size, and showed a homogeneous distribution. The sizes of nanoparticles formed by XRD pattern were supported and silver nanoparticles were obtained. According to the obtained XRD results, the crystal nature of nanoparticles in face-centered cubic structure was confirmed by the peaks in the XRD model corresponding to the planes (111) (200) (220) and (311). It was observed that the synthesized AgNPs provided a strong protection against plasmid DNA damage. It was determined that the inhibition zone diameters of biosynthesized nanoparticles measured in terms of antibacterial activity were between 10 and 14 mm. As a result, the study revealed significant antibacterial activity of the synthesized AgNPs due to extensive membrane damage.

Promising advances in nanobiotic-based formulations for drug specific targeting against multidrug-resistant microbes and biofilm-associated infections

Antimicrobial agents and alternative strategies to combat bacterial infections have become urgent due to the rapid development of multidrug-resistant bacteria caused by the misuse and overuse of antibiotics, as well as the ineffectiveness of antibiotics against difficult-to-treat infectious diseases. Nanobiotics is one of the strategies being explored to counter the increase in antibiotic-resistant bacteria. Nanobiotics are antibiotic molecules encapsulated in nanoparticles or artificially engineered pure antibiotics that are ≤ 100 nm in size in at least one dimension. Formulation scientists recognize nanobiotic delivery systems as an effective strategy to overcome the limitations associated with conventional antibiotic therapy. This review highlights the general mechanisms by which nanobiotics can be used to target resistant microbes and biofilm-associated infections. We focus on the design elements, properties, characterization, and toxicity assessment of organic nanoparticles, inorganic nanoparticle and molecularly imprinted polymer-based nano-formulations that can be designed to improve the efficacy of nanobiotic formulation.

Multifunctional fluorescent gold nanoclusters with enhanced aggregation-induced emissions (AIEs) and excellent antibacterial effect for bacterial imaging and wound healing

To explore new alternatives to combat increasing risk of bacterial infection, in this work, a cationic antimicrobial peptide (HHC10) and glutathione (GSH) co-ligand protected ultra-small gold nanoclusters (Au NCs) was constructed by a simple one-pot method. The intrinsic luminescent property of GSH-protected Au NCs (Au_xGSH) endowed enhanced aggregation-induced emissions (AIEs) of co-ligand-protected Au NCs (Au_xGSH-HHC10), which exhibited a very strong orange luminescence. Based on the AIE effect, for one thing, Au_xGSH could be applied to rapidly and selectively detect Gram-positive bacteria. For another, Au_xGSH-HHC10 exhibited potential for multicolor imaging of both Gram-negative and Gram-positive bacteria. Besides, as-synthesized Au_xGSH-HHC10 could act as potent nanoantibiotics against both Gram-negative and Gram-positive bacteria, which could not only avoid drug tolerance but also be effective toward drug-resistance bacteria. The antibacterial mechanism indicated that the synergetic effect of the generation of reactive oxygen species (ROS), binding with DNA, and broad-spectrum antibacterial activity of HHC10 led to the membrane damage, depolarization, and interference of biological function, thus enhancing the antibacterial effect. More importantly, such an Au NCs could realize excellent therapeutic outcomes for wound healing in vivo, and showed good biocompatibility and biosafety toward health tissues. The results will provide a great potential for the application of Au NCs for imaging-guided antibacterial platform.

Recent Developments in Methicillin-Resistant Staphylococcus aureus (MRSA) Treatment: A Review

Staphylococcus aureus (S. aureus) is a Gram-positive bacterium that may cause life-threatening diseases and some minor infections in living organisms. However, it shows notorious effects when it becomes resistant to antibiotics. Strain variants of bacteria, viruses, fungi, and parasites that have become resistant to existing multiple antimicrobials are termed as superbugs. Methicillin is a semisynthetic antibiotic drug that was used to inhibit staphylococci pathogens. The S. aureus resistant to methicillin is known as methicillin-resistant Staphylococcus aureus (MRSA), which became a superbug due to its defiant activity against the antibiotics and medications most commonly used to treat major and minor infections. Successful MRSA infection management involves rapid identification of the infected site, culture and susceptibility tests, evidence-based treatment, and appropriate preventive protocols. This review describes the clinical management of MRSA pathogenesis, recent developments in rapid diagnosis, and antimicrobial treatment choices for MRSA.

Nanoantibiotics to fight multidrug resistant infections by Gram-positive bacteria: hope or reality?

The spread of antimicrobial resistance in Gram-positive pathogens represents a threat to human health. To counteract the current lack of novel antibiotics, alternative antibacterial treatments have been increasingly investigated. This review covers the last decade's developments in using nanoparticles as carriers for the two classes of frontline antibiotics active on multidrug-resistant Gram-positive pathogens, i.e., glycopeptide antibiotics and daptomycin. Most of the reviewed papers deal with vancomycin nanoformulations, being teicoplanin- and daptomycin-carrying nanosystems much less investigated. Special attention is addressed to nanoantibiotics used for contrasting biofilm-associated infections. The status of the art related to nanoantibiotic toxicity is critically reviewed.

Overcoming the rising incidence and evolving mechanisms of antibiotic resistance by novel drug delivery approaches - An overview

Antimicrobial resistance is a normal evolutionary process for microorganisms. Antibiotics exerted accelerated selective pressure that hasten bacterial resistance through mutation, and acquisition external genes. These genes often carry multiple antibiotic resistant determinants allowing the recipient microbe an instant "super-bug" status. The extent of Antimicrobial Resistance (AMR) has reached a level of global crisis, existing antimicrobials are no long effective in treating infections caused by AMR pathogens. The great majority of clinically available antimicrobial agents are administered through oral and intra-venous routes. Overcoming antibacterial resistance by novel drug delivery approach offered new hopes, particularly in the treatment of AMR pathogens in sites less assessible through systemic circulation such as the lung and skin. In the current review, we will revisit the mechanism and incidence of important AMR pathogens. Finally, we will discuss novel drug delivery approaches including novel local antibiotic delivery systems, hybrid antibiotics, and nanoparticle-based antibiotic delivery systems.

Optical clearing of tissues: Issues of antimicrobial phototherapy and drug delivery

This review presents principles and novelties in the field of tissue optical clearing (TOC) technology, as well as application for optical monitoring of drug delivery and effective antimicrobial phototherapy. TOC is based on altering the optical properties of tissue through the introduction of immersion optical cleaning agents (OCA), which impregnate the tissue of interest. We also analyze various methods and kinetics of delivery of photodynamic agents, nanoantibiotics and their mixtures with OCAs into the tissue depth in the context of antimicrobial and antifungal phototherapy. In vitro and in vivo studies of antimicrobial phototherapies, such as photodynamic, photothermal plasmonic and photocatalytic, are summarized, and the prospects of a new TOC technology for effective killing of pathogens are discussed.

The Analysis of Chitosan-Coated Nanovesicles Containing Erythromycin-Characterization and Biocompatibility in Mice

Nanoantibiotics have proved improved pharmacokinetic characteristics and antimicrobial features. Recent studies have shown non-toxicity, non-immunogenicity, antioxidant, anti-hyperlipidemic, and hepatocyte protective actions, among other advantages of chitosan-based nanoparticles. The purpose of our study was the structural analysis of novel chitosan-coated vesicles entrapping erythromycin (ERT) and the assessment of their biocompatibility in mice. According to the group in which they were randomly assigned, the mice were treated orally with one of the following: distilled water; chitosan; ERT; chitosan vesicles containing ERT. Original nanosystems entrapping ERT in liposomes stabilized with chitosan were designed. Their oral administration did not produce sizeable modifications in the percentages of the leukocyte formula elements, of some blood constants useful for evaluating the hepatic and renal function, respectively, and of some markers of oxidative stress and immune system activity, which suggests a good biocompatibility in mice. The histological examination did not reveal significant alterations of liver and kidney architecture in mice treated with chitosan liposomes entrapping ERT. The results indicate the designed liposomes are a promising approach to overcome disadvantages of conventional ERT treatments and to amplify their benefits and can be further studied as carrier systems.

Nanoantibiotics Based in Mesoporous Silica Nanoparticles: New Formulations for Bacterial Infection Treatment

This review focuses on the design of mesoporous silica nanoparticles for infection treatment. Written within a general context of contributions in the field, this manuscript highlights the major scientific achievements accomplished by professor Vallet-Regí's research group in the field of silica-based mesoporous materials for drug delivery. The aim is to bring out her pivotal role on the envisage of a new era of nanoantibiotics by using a deep knowledge on mesoporous materials as drug delivery systems and by applying cutting-edge technologies to design and engineer advanced nanoweapons to fight infection. This review has been divided in two main sections: the first part overviews the influence of the textural and chemical properties of silica-based mesoporous materials on the loading and release of antibiotic molecules, depending on the host-guest interactions. Furthermore, this section also remarks on the potential of molecular modelling in the design and comprehension of the performance of these release systems. The second part describes the more recent advances in the use of mesoporous silica nanoparticles as versatile nanoplatforms for the development of novel targeted and stimuli-responsive antimicrobial nanoformulations for future application in personalized infection therapies.

Catalytic Use toward the Redox Reaction of Toxic Industrial Wastes in Innocuous Aqueous Medium and Antibacterial Activity of Novel Cu x Ag x Zn1-2x O Nanocomposites

In this work, we report the redox properties in organic catalytic transformation and antibacterial activity of novel Cu x Ag x Zn1-2x O nanocomposites. Cu- and Ag-doped ZnO [Cu x Ag x Zn1-2x O (x = 0.1)] (CAZ), Cu-doped ZnO [Cu x Zn1-x O (x = 0.1)] (CZ), and Ag-doped ZnO [Ag x Zn1-x O (x = 0.1)] (AZ) were prepared via a chemical co-precipitation method. The synthesized nanocomposites were characterized using different spectroscopic techniques. The catalytic activity of CAZ, CZ, and AZ was examined for the reduction of 4-nitrophenol (4-NP) and 4-nitroaniline (4-NA) in the presence of NaBH4 in an aqueous medium. The photocatalytic oxidation efficiency of these catalysts was also observed against naphthol orange (NO) under ultraviolet light. It was found that the catalytic reduction and oxidation efficiency of CAZ is higher than that of CZ and AZ in 4-NP/4-NA and NO in a water solvent, respectively. The antibacterial property of CAZ was also studied against Gram-positive and Gram-negative bacteria by agar well diffusion and the minimum inhibitory concentration methods. It was found that CAZ shows better antimicrobial activity compared to its parental Cu(NO3)2·3H2O, AgNO3, and ZnO. Therefore, the incorporation of Cu and Ag into ZnO increases its catalytic and antimicrobial activity remarkably. Fourier-transform infrared and X-ray diffraction (XRD) studies of CAZ indicate the incorporation of Cu and Ag into the lattice of ZnO. The phase structure of CAZ was wurtzite hexagonal, and the average crystallite size was 93 ± 1 nm measured from XRD. The average grain size and particle size of CAZ were found to be 200 and 100 ± 5 nm originating from SEM and transmission electron microscopy studies, respectively. The optical energy band gap of CAZ is 3.15 eV, which supports the excellent photocatalyst under UV light. CAZ also exhibits good agreement for photoluminescence properties with a high intensity peak at 571 nm, indicating surface oxygen vacancies and defects which might be responsible for higher photocatalytic activity compared to others. The nanocomposite shows excellent reusability without any significant loss of activity.

The Emerging Role of Ionic Liquid-Based Approaches for Enhanced Skin Permeation of Bioactive Molecules: A Snapshot of the Past Couple of Years

Topical and transdermal delivery systems are of undeniable significance and ubiquity in healthcare, to facilitate the delivery of active pharmaceutical ingredients, respectively, onto or across the skin to enter systemic circulation. From ancient ointments and potions to modern micro/nanotechnological devices, a variety of approaches has been explored over the ages to improve the skin permeation of diverse medicines and cosmetics. Amongst the latest investigational dermal permeation enhancers, ionic liquids have been gaining momentum, and recent years have been prolific in this regard. As such, this review offers an outline of current methods for enhancing percutaneous permeation, highlighting selected reports where ionic liquid-based approaches have been investigated for this purpose. Future perspectives on use of ionic liquids for topical delivery of bioactive peptides are also presented.

State of the Art in the Antibacterial and Antiviral Applications of Carbon-Based Polymeric Nanocomposites

The development of novel approaches to prevent bacterial infection is essential for enhancing everyday life. Carbon nanomaterials display exceptional optical, thermal, and mechanical properties combined with antibacterial ones, which make them suitable for diverse fields, including biomedical and food applications. Nonetheless, their practical applications as antimicrobial agents have not been fully explored yet, owing to their relatively poor dispersibility, expensiveness, and scalability changes. To solve these issues, they can be integrated within polymeric matrices, which also exhibit antimicrobial activity in some cases. This review describes the state of the art in the antibacterial applications of polymeric nanocomposites reinforced with 0D fullerenes, 1D carbon nanotubes (CNTs), and 2D graphene (G) and its derivatives such as graphene oxide (GO) and reduced graphene oxide (rGO). Given that a large number of such nanocomposites are available, only the most illustrative examples are described, and their mechanisms of antimicrobial activity are discussed. Finally, some applications of these antimicrobial polymeric nanocomposites are reviewed.

Multifunctional SGQDs-CORM@HA nanosheets for bacterial eradication through cascade-activated "nanoknife" effect and photodynamic/CO gas therapy

Infection associated with multidrug-resistant (MDR) bacteria has become a serious threat to public health, and there is an urgent demand of developing new antibiotics that offer combinatorial therapy to effectively combat MDR. Herein, a multifunctional two-dimensional nanoantibiotic was facilely designed and established on the basis of the covalent conjugation of CO-releasing molecule (CORM-401) and electrostatic adsorption of hyaluronic acid (HA) onto single-layered graphene quantum dots (SGQDs) to assemble SGQDs-CORM@HA nanosheets, abbreviated as SCH. Upon the enrichment of as-prepared nanoantibiotics in the community of targeted microbe, bacterial-secreted hyaluronidase (HAase) would cleave HA on SCH, and the sharp edges as well as the reactive sites on SGQDs-CORM nanosheets were exposed for cascade activation of synergistic antibacterial effects. Specifically, ultrathin SGQDs-CORM nanosheets can penetrate into bacterial cells deemed as the unique "nanoknife" effect. Under white light irradiation, SGQDs-CORM nanosheets can act as a high-efficient photosensitizer to generate cytotoxic singlet oxygen (¹O₂), as a well-recognized reactive oxygen species (ROS), to produce high oxidative stress and damage bacteria. As a complementary to photodynamic therapy (PDT), the accumulation of local ROS further triggered the release of CO to hinder the bacterial growth via causing plasma membrane damage and inducing metabolic disorders. Such synergistic treatment regimen arising from cascade-activated "nanoknife" effect and photodynamic/CO gas therapy, was devoted to outstanding on-demand antibacterial performance both in vitro and in vivo. Fascinatingly, the nanoplatform showed good biocompatibility toward both normal somatic cells and non-targeted bacteria. The remarkable antibacterial capability and admirable biocompatibility endow SCH with great potential to fight against MDR pathogens for in-coming clinical translations.