Green Synthesized Silver Nanoparticle-Loaded Liposome-Based Nanoarchitectonics for Cancer Management: In Vitro Drug Release Analysis

Anti-cancer efficiency of Campylobacter jejuni secretome loaded chitosan nanoparticles on colorectal cancer signaling pathways

Colorectal cancer (CRC) remains as a major health problem with high lethality rate in the world. The innovate therapeutic strategies are essential in CRC management. The purpose of this research was to evaluate the effect of chitosan nanoparticle containing Campylobacter jejuni culture supernatant (CNP/Cj-sup) on genes involved in CRC signaling pathways. CNP/Cj-sup was fabricated via ionotropic gelation method. Dynamic light scattering and transmission electron microscopy (TEM) techniques were employed to characterize of the CNP/Cj-sup including the electrical charge, size distribution, and morphological properties. The loaded protein, released protein, and entrapment efficacy (EE) were assayed utilizing a BCA assay kit. After the evaluation of the viability of Caco-2 (colon adenocarcinoma) and HDF (human dermal fibroblasts) cells against CNP/Cj-sup by MTT assay, subsequently anti-tumor effect of CNP/Cj-sup on genes associated with CRC signaling pathways was assessed via real-time PCR method. The size dispersion of CNP/Cj-sup was 400.6 ± 24.4 nm with an electrical charge of + 4.5 mV. The loaded protein was calculated 1100 µg. The release rate of protein from CNP/Cj-sup was 78% at pH of 6.8 after 48 h, with EE of 74.62%. The viability of Caco-2 and HDF cells against CNP/Cj-sup (1100 µg + 0.05%) was measured 75.8 and 96.5%, respectively after 48 h. CNP/Cj-sup exhibited the highest efficacy in inhibiting the expression of oncogenes TGF-α, Bcl2, TLR4, CEA, TGF-β, and PI3K by to 0.06, 0.34, 0.14, 0.13, 0.08, and 0.14-fold (p value < .0001). Moreover, it led to a significant increase in the expression of the suppressor genes caspase9 and PTEN by to 55.7 and 1.8- fold (p value < .0001). CNP/Cj-sup demonstrated the highest efficiency in suppressing TGF-α and enhancing caspase9 compared to CNP and Cj-sup. In conclusion, CNP/Cj-sup as an innovative potential anticancer agent, with the ability to modulate genes involved in CRC progression, represents a promising approach to CRC treatment.

Graphical abstract

The effect of CNP/Cj-sup on different colorectal cancer signaling pathways.

Polyallylamine Hydrochloride-Modified Bovine Serum Albumin Nanoparticles Loaded with α-Solanine for Chemotherapy of Pancreatic Cancer

Introduction

α-Solanine (α-Sol) shows promise for pancreatic cancer (PC) treatment by inhibiting PC cell proliferation, migration, and invasion. However, its clinical application is hindered by poor tumor targeting, significant toxicity, and undesirable pharmacokinetics. To address these issues, this study developed a nanoparticle delivery system (PBSO NPs) using bovine serum albumin as a carrier, with polyallylamine hydrochloride surface modification to enhance α-Sol delivery.

Methods

PBSO NPs were characterized using transmission electron microscopy, dynamic light scattering, nanoparticle size analyzers, and Fourier-transform infrared spectroscopy. Their in vitro drug release profile and cellular uptake capabilities were evaluated. Furthermore, in vitro experiments were conducted using mouse pancreatic cancer cells (Panc02) to investigate the effects of PBSO NPs on Panc02 cell viability, migration, invasion, and apoptosis. Additionally, a pancreatic cancer xenograft tumor model was established for in vivo experiments to explore the impact of PBSO NPs on tumor growth.

Results

This study successfully developed PBSO NPs with favorable morphology and physiological stability, capable of enhancing cellular uptake. In vitro experiments demonstrated that PBSO NPs significantly inhibited the viability, migration, and invasion of Panc02 cells while promoting apoptosis. Moreover, PBSO NPs enhanced the inhibitory effects of α-Sol on Panc02 cells. In vivo experiments further confirmed that PBSO NPs improved the therapeutic efficacy of α-Sol against PC while partially reducing its toxicity. Additionally, PBSO NPs exhibited good biocompatibility.

Discussion

PBSO NPs enhance the therapeutic efficacy of α-Sol against PC by inhibiting the viability, migration, and invasion of PC cells while promoting apoptosis, thereby suppressing the progression of PC. This provides a promising therapeutic strategy for pancreatic cancer treatment.

Development of Rapidly Dissolving Microneedles Integrated with Valsartan-Loaded Nanoliposomes for Transdermal Drug Delivery: In Vitro and Ex Vivo Evaluation

Background: Hypertension (HTN) is recognized as a major risk factor for cardiovascular disease, chronic kidney disease, and peripheral artery disease. Valsartan (VAL), an angiotensin receptor blocker drug for hypertension, has been limited due to its poor solubility and poor absorption from the GIT, which leads to low oral bioavailability. Objectives/Method: In the present research, firstly, VAL-loaded nanoliposomes were formulated and optimized using the Box-Behnken design (BBD). Optimized VAL-nanoliposomes were physically characterized and their fate was examined by scanning and transmission microscopy, DSC, FTIR, XRD, and ex vivo studies using rat skin. In vitro studies using human keratinocyte (HaCaT) cells showed a decrease in cell viability as the liposome concentration increased. Secondly, the formulation of VAL-loaded nanoliposomes was integrated into dissolvable microneedles (DMNs) to deliver the VAL transdermally, crossing the skin barrier for better systemic delivery. Results: The optimized nanoliposomes showed a vesicle size of 150.23 (0.47) nm, a ZP of -23.37 (0.50) mV, and an EE% of 94.72 (0.44)%. The DMNs were fabricated using a ratio of biodegradable polymers, sodium alginate (SA), and hydroxypropyl methylcellulose (HPMC). The resulting VAL-LP-DMNs exhibited sharp pyramidal microneedles, adequate mechanical properties, effective skin insertion capability, and rapid dissolution of the microneedles in rat skin. In the ex vivo analysis, the transdermal flux of VAL was significantly (5.36 (0.39) μg/cm2/h) improved by VAL-LP-DMNs. The enhancement ratio of the VAL-LP-DMNs was 1.85. In conclusion, liposomes combined with DMNs have shown high potential and bright prospects as carriers for the transdermal delivery of VAL. Conclusions: These DMNs can be explored in studies focused on in vivo evaluations to confirm their safety, pharmacokinetics profile, and pharmacodynamic efficacy.

Graphdiyne biomaterials: from characterization to properties and applications

Graphdiyne (GDY), the sole synthetic carbon allotrope with sp-hybridized carbon atoms, has been extensively researched that benefit from its pore structure, fully conjugated surfaces, wide band gaps, and more reactive C≡C bonds. In addition to the intrinsic features of GDY, engineering at the nanoscale, including metal/transition metal ion modification, chemical elemental doping, and other biomolecular modifications, endowed GDY with a broader functionality. This has led to its involvement in biomedical applications, including enzyme catalysis, molecular assays, targeted drug delivery, antitumor, and sensors. These promising research developments have been made possible by the rational design and critical characterization of GDY biomaterials. In contrast to other research areas, GDY biomaterials research has led to the development of characterization techniques and methods with specific patterns and some innovations based on the integration of materials science and biology, which are crucial for the biomedical applications of GDY. The objective of this review is to provide a comprehensive overview of the biomedical applications of GDY and the characterization techniques and methods that are essential in this process. Additionally, a general strategy for the biomedical research of GDY will be proposed, which will be of limited help to researchers in the field of GDY or nanomedicine.

Highly Stable Antitumor Silver-Lipid Nanoparticles Optimized for Targeted Therapy

Background

Silver nanoparticles (AgNPs) have a broad spectrum of biocidal effects, allowing also their antitumor application. To enhance bioavailability, minimize adverse effects and enable targeted drug delivery AgNPs may be encapsulated in liposomes. In this study we aimed to create highly stable and effective antitumor AgNP lipid formulations (LAgs).

Methods

Uncapped and citrate-stabilized AgNPs were encapsulated by the lipid film hydration method using several phospholipid mixtures, followed by the essential removal of unencapsulated AgNPs by size exclusion chromatography (SEC). Purified LAgs were characterized by UV-VIS, DLS, XRD, ICP-MS, transmission electron microscopy (TEM) and glycerol-based density gradient centrifugation (DGC). Liposomal stability was assessed by carboxyfluorescein (CF) leakage, while antitumor effects of purified LAgs were tested in MTT, clonogenic and 3D spheroid invasion experiments.

Results

The presence of AgNPs inside SEC-purified liposomes was confirmed by TEM, XRD and ICP-MS. Encapsulation efficiency was estimated to be between 18.7 and 25.5%. Purified LAgs had higher density as compared to free AgNPs revealed by DGC, indicating that a considerable fraction of liposomes contained AgNPs. LAgs with PC/PG, PC/PG/SM/Chol, and in particular PC/PG/SM displayed the highest stability assessed by CF leakage, whereas high content of neutral or negatively charged phospholipids was destabilizing. As shown by MTT and colony formation assays, viability and survival of A375 and RPMI-7951 melanoma cells were severely impaired by LAgs at a higher or comparable level as caused by free AgNPs. Used as a non-tumor control, HEK293 cells were less vulnerable to LAgs as compared to free AgNPs. Finally, applying the most stable lipid composition, PC/PG/SM-LAg-c, and in part PC/PG/SM-LAg-u effectively inhibited a tissue-like invasion of melanoma spheroids.

Conclusion

Altogether, highly stable purified LAg formulations were created, which effectively block survival, clonogenic potential and invasion of melanoma cells, therefore could be promising NP platforms for targeted tumor therapy.

Influence of Formulation Composition on the Characteristic Properties of 5-fluorouracil-loaded Liposomes

Objectives

Variations in the types and quantities of excipients used to prepare liposomes can affect the physicochemical properties of liposome formulations. This study aimed to provide information about the design and fabrication of 5-fluorouracil (5-FU)-loaded liposome formulations using different lipid and cholesterol (CHOL) derivatives.

Materials and Methods

Passive loading via a small-volume incubation method was used to prepare liposomes. The particle size, polydispersity index, zeta potential, and encapsulation efficiency (EE%) of the formulations were determined. The release studies of the formulations were conducted using a Franz diffusion cell at 37 °C. In this study, a high-pressure liquid chromatography device was used to measure the amount of 5-FU.

Results

The mean particle sizes of all formulations were between 134 and 166 nm, and they had a negative charge on their surface. Increasing the cholesteryl hemisuccinate content reduced the size of the liposomes. Additionally, all formulations exhibited a low polydispersity index (0.3). The EE% of all formulations exceeded 30%. The in vitro release of 5-FU from liposome formulations followed the Korsemeyer-Peppas model.

Conclusion

Modifying the lipid and CHOL content in the formulations, as indicated by the experimental results, can change the characteristic properties of liposomes. The use of soybean phosphatidylcholine and cholesteryl hemisuccinate appears to be a promising combination for the preparation of hydrophilic drug-loaded liposome formulations.

Preparation and evaluation of Puerarin-loaded PLGA nanoparticles for improving oral bioavailability in SD rats

BACKGROUND

Puerarin (Pue) is an isoflavone compound with significant therapeutic effect on cardiovascular diseases, but its poor water solubility and low oral bioavailability limit clinical application.

METHODS

In this study, Pue was prepared into PLGA nanoparticles (Pue-PLGA NPs) by emulsion solvent volatilization method. The morphology, particle size, Zeta potential, X-ray diffraction (XRD), and fourier transform infrared (FTIR) of the NPs were characterized. Additionally, their stability and in vitro release were evaluated. SD rats were orally administered wtih Pue and Pue-PLGA NPs, and a high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was established to determine the concentration of blood samples and to investigate the pharmacokinetic behaviour of Pue and Pue-PLGA NPs in rats.

RESULTS

The NPs were observed by transmission electron microscopy (TEM) as regular spheroids and uniformly dispersed. The average particle size of the NPs was (167.1±5.26）nm, the Zeta potential was (-29.88±2.46)mV, the encapsulation rate was (83.12 %±4.73 %) and the drug loading capacity was (7.75 %±1.81 %). The results of in vitro release showed that the drug was released slowly and continuously from the NPs, reaching the release platform in 24 h, and the cumulative release amount was (88.55±2.86) %. The pharmacokinetic results showed that the AUC0-24, AUC0-∞, Cmax, Tmax, t1/2, MRT0-24 and MRT0-∞ of Pue-PLGA NPs were 2.196, 1.978, 1.327, 1.5, 1.385, 3.915 and 3.140 times of Pue, respectively. The relative bioavailability was (197.82±25.28) %.

CONCLUSION

These results indicated that the prepared nanoparticles had small particle size, high encapsulation rate, drug loading capacity and good slow-release effect, and could significantly improve the oral bioavailability of Pue in rats.

Novel Liposome-Gel Formulations Containing a Next Generation Postbiotic: Characterization, Rheological, Stability, Release Kinetic, and In Vitro Antimicrobial Activity Studies

In recent years, in addition to the positive effects of probiotics and prebiotics on health, increasing research has shown that postbiotics also have significant potential in the health field. Postbiotics are bioactive components produced by probiotic bacteria during fermentation and may exhibit antimicrobial activity. This study investigated the antimicrobial effects of liposomal postbiotics formulated in gel. Various postbiotic-containing liposomal systems have been developed and optimized to prepare formulations. Optimized liposomes and liposomal postbiotic-containing gel forms were examined in terms of particle size, polydispersity index, zeta potential, structural properties, encapsulation efficiency, permeability, release profiles, and stability. Finally, the antimicrobial activities of the postbiotics and the optimum gel formulation LG1 were evaluated on Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, Enterococcus hirae, and Candida albicans strains using disk diffusion and microdilution methods. The optimum liposome formulation L1 was determined to have a particle size of 185.32 ± 0.80 nm, a polydispersity index of 0.206 ± 0.012, a zeta potential of 35.0 ± 0.5 mV, and an encapsulation efficiency of 17.52%. Its permeability was determined as 51.52% at the end of 6 h. In vitro release studies showed that the drug release profile was in accordance with first-order kinetics and suitable for controlled release. The findings show that formulated postbiotics have similar antimicrobial activity to free postbiotics. These results suggest that liposomal gel formulations support the antimicrobial effects of postbiotics while providing advantages of use. In conclusion, the findings contribute to a better understanding of the antimicrobial potential of postbiotics and lipogelosomal postbiotics and optimize their use in pharmaceutical applications.

Computational Designed and Optimized Liposomal Curcumin-Embedded Bifunctional Cross-Linked Hydrogels for Wound Healing

Curcumin (CUR) bifunctional cross-linked nanocomposite hydrogels are presented as an efficient method for CUR delivery in wound healing. CUR-loaded liposomes (CUR-Ls) were optimized using the Box-Behnken design to augment particle size, size distribution, zeta potential, and CUR concentration. The antioxidant activity and cytotoxicity of CUR-Ls were assessed. Hyaluronic acid (HA)/poly(vinyl alcohol) (PVA) hydrogels were optimized with a central composite design; then, poly(N-vinylpyrrolidone-co-itaconic acid) (PNVP-ITA) was synthesized to enrich the properties of the hydrogels. The drug release kinetics of the CUR-L@HA/PVA/PNVP-ITA hydrogels were studied. Skin recovery was investigated in vivo on rat dorsal skin. The optimized CUR-Ls were constructed from 2.7% Tween® 20, 0.04% oleic acid, and 8.1% CUR, yielding nano-CUR-L with a narrow size distribution, negative surface charge, and CUR content of 19.92 ± 0.54 µg/mg. CUR-Ls improved the antioxidant effects of CUR. The optimized hydrogel contained 5% HA and 10% PVA. PNVP-ITA improved the properties of the hydrogels via enhanced cross-linking. CUR-Ls exhibited a more rapid release than CUR, whereas the hydrogels enhanced CUR release via a diffusion-controlled mechanism. CUR-L@HA/PVA/PNVP-ITA hydrogels improved the skin recovery rate compared to the commercial patch after 5 days. Therefore, the optimized CUR-L@HA/PVA/PNVP-ITA hydrogels facilitated skin recovery and could be a promising nanocomposite for wound dressings.

In-situ fabrication of resveratrol loaded sodium alginate coated silver nanoparticles for in vitro studies of mitochondrial-targeted anticancer treatment against MCF-7 cell lines

The study aims to improve the viability and stability of resveratrol by encapsulating metal-based biocompatible nanocarrier for mitochondrial-targeted delivery and breast cancer treatment. For this purpose, sodium alginate coated silver nanoparticles were synthesized by in-situ reduction of silver nitrate using sodium borohydride. The prepared nanoparticles and resveratrol-loaded nanoparticles were characterized by utilizing the following instruments including X-ray diffraction (XRD), UV visible spectroscopy, Photoluminescence (PL) spectroscopy, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray (EDX), Fourier Transform Infrared (FTIR), Raman spectroscopy, Zeta potential. The dialysis method revealed increased resveratrol release in pH 5 phosphate buffer. The incorporation of resveratrol significantly stimulated the antioxidant activity of sodium alginate coated silver nanoparticles. MTT assay was employed to evaluate the biocompatibility and anticancer potential of developed sodium alginate coated silver nanoparticles and resveratrol-loaded nanoparticles with increasing concentrations against normal HaCaT and breast cancer MCF-7 cell lines respectively. Further, the apoptotic morphology of MCF-7 cells treated with sodium alginate coated nanoparticles and resveratrol loaded nanoparticles was evaluated by AO/EtBr staining and apoptosis was demonstrated in the form of green and red fluorescence. Mitochondrial staining with Mito-Tracker Red evaluated the targeted delivery of RES into mitochondria leading to apoptosis of cancer cells.

A Comparative Mathematical Analysis of Drug Release from Lipid-Based Nanoparticles

Mathematical modeling of drug release from drug delivery systems is crucial for understanding and optimizing formulations. This research provides a comparative mathematical analysis of drug release from lipid-based nanoparticles. Drug release profiles from various types of lipid nanoparticles, including liposomes, nanostructured lipid carriers (NLCs), solid lipid nanoparticles (SLNs), and nano/micro-emulsions (NEMs/MEMs), were extracted from the literature and used to assess the suitability of eight conventional mathematical release models. For each dataset, several metrics were calculated, including the coefficient of determination (R2), adjusted R2, the number of errors below certain thresholds (5%, 10%, 12%, and 20%), Akaike information criterion (AIC), regression sum square (RSS), regression mean square (RMS), residual sum of square (rSS), and residual mean square (rMS). The Korsmeyer-Peppas model ranked highest among the evaluated models, with the highest adjusted R2 values of 0.95 for NLCs and 0.93 for other liposomal drug delivery systems. The Weibull model ranked second, with adjusted R2 values of 0.92 for liposomal systems, 0.94 for SLNs, and 0.82 for NEMs/MEMs. Thus, these two models appear to be more effective in forecasting and characterizing the release of lipid nanoparticle drugs, potentially making them more suitable for upcoming research endeavors.

Development of Chlorhexidine-loaded Lipid Nanoparticles Incorporated in a Bioceramic Endodontic Sealer

INTRODUCTION

This study aimed to assess BioRoot RCS (BR) incorporating liposomal chlorhexidine digluconate (CHX) for its antibacterial activity, drug release capacity, and physicochemical properties.

METHODS

Drug release of CHX liposomal formulations in combination with BR was evaluated spectrophotometrically and through mathematical release models for 30 days. A selected combination was evaluated for antimicrobial properties against Enterococcus faecalis biofilm growth on human dentin. Cytotoxicity was assessed following the ISO 10993-5:2019 standard on days 1, 3, and 7. Physicochemical properties were evaluated through setting time, Fourier transform infrared spectroscopy, solubility, contact angle, and film thickness.

RESULTS

From BR, liposomal CHX released up to 7-fold higher CHX than CHX solution (P < .05), following a triphasic drug release pattern compared to the CHX solution, which followed a quasi-Fickian diffusion. BR combined with a selected liposomal CHX completely inhibited E. faecalis biofilm growth compared to the combination of BR with CHX solution and the control group (P < .05). Liposomal CHX decreased the contact angle (P < .05) and solubility but increased cytotoxicity (P < .05) of BR, staying above the ISO threshold. None of the other physicochemical characteristics tested differed from BR (P > .05).

CONCLUSION

This liposomal formulation improved CHX release from BR, enhancing the antibacterial effectiveness. It presents a promising approach for local antibiofilm therapy in endodontics without substantially altering the physicochemical characteristics of BR.

Pongamia pinnata seed extract-mediated green synthesis of silver nanoparticle loaded nanogel for estimation of their antipsoriatic properties

This research describes the eco-friendly green synthesis of silver nanoparticles employing Pongamia pinnata seed extracts loaded with nanogel formulations (AgNPs CUD NG) to improve the retention, accumulation, and the penetration of AgNPs into the epidermal layer of psoriasis. AgNPs were synthesized using the Box-Behnken design. Optimized AgNPs and AgNPs CUD NG were physico-chemically evaluated using UV-vis spectroscopy, SEM, FT-IR, PXRD, viscosity, spreadability, and retention studies. It was also functionally assessed using an imiquimod-induced rat model. The entrapment efficiency of AgNPs revealed ~ 79.35%. Physico-chemical parameters announced the formation of AgNPs via surface plasmon resonance and interaction between O-H, C = O, and amide I carbonyl group of protein extract and AgNO3. Optimized AgNPs showed spherical NPs ~ 116 nm with better physical stability and suitability for transdermal applications. AgNPs CUD NG revealed non-Newtonian, higher spreadability, and better extrudability, indicating its suitability for a transdermal route. AgNPs CUD NG enhanced the retention of AgNPs on the psoriatic skin compared to normal skin. Optimized formulations exhibit no irritation by the end of 72 h, indicating formulation safety. AgNPs CUD NG at a dose of 1 FTU showed significant recovery from psoriasis with a PASI score of ~ 0.8 compared to NG base and marketed formulations. Results indicated that seed extract-assisted AgNPs in association with CUD-based NG formulations could be a promising nanocarrier for psoriasis and other skin disorders.

Enhancement of lemongrass essential oil physicochemical properties and antibacterial activity by encapsulation in zein-caseinate nanocomposite

Essential oils (EOs) represent a pivotal source for developing potent antimicrobial drugs. However, EOs have seldom found their way to the pharmaceutical market due to their instability and low bioavailability. Nanoencapsulation is an auspicious strategy that may circumvent these limitations. In the current study, lemongrass essential oil (LGO) was encapsulated in zein-sodium caseinate nanoparticles (Z-NaCAS NPs). The fabricated nanocomposite was characterized using dynamic light scattering, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and transmission electron microscopy. The antimicrobial activity of LGO loaded NPs was assessed in comparison to free LGO against Staphylococcus epidermidis, Enterococcus faecalis, Escherichia coli, and Klebsiella pneumoniae. Furthermore, their antibacterial mechanism was examined by alkaline phosphatase, lactate dehydrogenase, bacterial DNA and protein assays, and scanning electron microscopy. Results confirmed the successful encapsulation of LGO with particle size of 243 nm, zeta potential of - 32 mV, and encapsulation efficiency of 84.7%. Additionally, the encapsulated LGO showed an enhanced thermal stability and a sustained release pattern. Furthermore, LGO loaded NPs exhibited substantial antibacterial activity, with a significant 2 to 4 fold increase in cell wall permeability and intracellular enzymes leakage versus free LGO. Accordingly, nanoencapsulation in Z-NaCAS NPs improved LGO physicochemical and antimicrobial properties, expanding their scope of pharmaceutical applications.

Bio-gel nanoarchitectonics in tissue engineering

Given the creation of materials based on nanoscale science, nanotechnology must be combined with other disciplines. This role is played by the new concept of nanoarchitectonics, the process of constructing functional materials from nanocomponents. Nanoarchitectonics may be highly compatible with applications in biological systems. Conversely, it would be meaningful to consider nanoarchitectonics research oriented toward biological applications with a focus on materials systems. Perhaps, hydrogels are promising as a model medium to realize nanoarchitectonics in biofunctional materials science. In this review, we will provide an overview of some of the defined targets, especially for tissue engineering. Specifically, we will discuss (i) hydrogel bio-inks for 3D bioprinting, (ii) dynamic hydrogels as an artificial extracellular matrix (ECM), and (iii) topographical hydrogels for tissue organization. Based on these backgrounds and conceptual evolution, the construction strategies and functions of bio-gel nanoarchitectonics in medical applications and tissue engineering will be discussed.

Liposome-siderophore conjugates loaded with moxifloxacin serve as a model for drug delivery against Mycobacterium tuberculosis

Tuberculosis (TB) is an infectious disease that annually affects millions of people, and resistance to available antibiotics has exacerbated this situation. Another notable characteristic of Mycobacterium tuberculosis, the primary causative agent of TB, is its ability to survive inside macrophages, a key component of the immune system. In our quest for an effective and safe treatment that facilitates the targeted delivery of antibiotics to the site of infection, we have proposed a nanotechnology approach based on an iron chelator. Iron chelators are the primary mechanism by which bacteria acquire iron, a metal essential for their metabolism. Four liposomes were synthesized and characterized using the dynamic light scattering technique (DLS), nanoparticle tracking analysis (NTA), and transmission electron microscopy (TEM). All of these methods revealed the presence of spherical particles, approximately 200 nm in size. NTA indicated a concentration of around 1011 particles/mL. We also developed and validated a high-performance liquid chromatography method for quantifying Moxifloxacin to determine encapsulation efficiency (EE) and release profiles (RF). The EE was 51.31 % for LipMox and 45.76 % for LipIchMox. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed the phagocytosis of liposomal vesicles by macrophages. Functionalizing liposomes with iron chelators can offer significant benefits for TB treatment, such as targeted drug delivery to intracellular bacilli through the phagocytosis of liposomal particles by cells like macrophages.

Enhanced efficacy of β-carotene loaded solid lipid nanoparticles optimized and developed via central composite design on breast cancer cell lines

β-carotene is obtained from both plants and animals and has been the subject of intense research because of its provitamin-A, antioxidant, and anticancer effects. Its limited absorption and oxidative degradation significantly reduce its antitumor efficacy when taken orally. In our study, we utilize a central composite design to develop "bio-safe and highly bio-compatible" solid lipid nanoparticles (SLNs) by using only the combination of palmitic acid and poloxamer-407, a block co-polymer as a surfactant. The current research aim to develop and characterize SLNs loaded with β-carotene to improve their bioavailability and therapeutic efficacy. In addition, the improved cytotoxicity of solid lipid nanoparticles loaded with β-carotene was screened in-vitro in human breast cancer cell lines (MCF-7). The nanoparticles exhibits good stability, as indicated by their mean zeta potential of -26.3 ± 1.3 mV. The particles demonstrated high drug loading and entrapment capabilities. The fabricated nanoparticle's prolonged release potential was shown by the in-vitro release kinetics, which showed a first-order release pattern that adhered to the Higuchi model and showed a slow, linear, and steady release over 48 h. Moreover, a diffusion-type release mechanism was used to liberate β-carotene from the nanoparticles. For six months, the nanoparticles also showed a notable degree of physical stability. Lastly, using the MTT assay, the anti-cancer properties of β-carotene-loaded solid lipid nanoparticles were compared with intact β-carotene on MCF-7 cell lines. The cytotoxicity tests have shown that the encapsulation of β-carotene in the lipid bilayers of the optimized formulation does not interfere with the anti-cancer activity of the drug. When compared to standard β-carotene, β-carotene loaded SLNs showed enhanced anticancer efficacy and it is a plausible therapeutic candidate for enhancing the solubility of water-insoluble and degradation-sensitive biotherapeutics like β-carotene.

Layer-by-layer designer nanoarchitectonics for physical and chemical communications in functional materials

Nanoarchitectonics, as a post-nanotechnology concept, constructs functional materials and structures using nanounits of atoms, molecules, and nanomaterials as materials. With the concept of nanoarchitectonics, asymmetric structures, and hierarchical organization, rather than mere assembly and organization of structures, can be produced, where rational physical and chemical communications will lead to the development of more advanced functional materials. Layer-by-layer assembly can be a powerful tool for this purpose, as exemplified in this feature paper. This feature article explores the possibility of constructing advanced functional systems based on recent examples of layer-by-layer assembly. We will illustrate both the development of more basic methods and more advanced nanoarchitectonics systems aiming towards practical applications. Specifically, the following sections will provide examples of (i) advancement in basics and methods, (ii) physico-chemical aspects and applications, (iii) bio-chemical aspects and applications, and (iv) bio-medical applications. It can be concluded that materials nanoarchitectonics based on layer-by-layer assembly is a useful method for assembling asymmetric structures and hierarchical organization, and is a powerful technique for developing functions through physical and chemical communication.

2D Materials Nanoarchitectonics for 3D Structures/Functions

It has become clear that superior material functions are derived from precisely controlled nanostructures. This has been greatly accelerated by the development of nanotechnology. The next step is to assemble materials with knowledge of their nano-level structures. This task is assigned to the post-nanotechnology concept of nanoarchitectonics. However, nanoarchitectonics, which creates intricate three-dimensional functional structures, is not always easy. Two-dimensional nanoarchitectonics based on reactions and arrangements at the surface may be an easier target to tackle. A better methodology would be to define a two-dimensional structure and then develop it into a three-dimensional structure and function. According to these backgrounds, this review paper is organized as follows. The introduction is followed by a summary of the three issues; (i) 2D to 3D dynamic structure control: liquid crystal commanded by the surface, (ii) 2D to 3D rational construction: a metal-organic framework (MOF) and a covalent organic framework (COF); (iii) 2D to 3D functional amplification: cells regulated by the surface. In addition, this review summarizes the important aspects of the ultimate three-dimensional nanoarchitectonics as a perspective. The goal of this paper is to establish an integrated concept of functional material creation by reconsidering various reported cases from the viewpoint of nanoarchitectonics, where nanoarchitectonics can be regarded as a method for everything in materials science.

Optimization, In Vitro and Ex Vivo Assessment of Nanotransferosome Gels Infused with a Methanolic Extract of Solanum xanthocarpum for the Topical Treatment of Psoriasis

The goal of this investigation is to improve the topical delivery of medicine by preparing and maximizing the potential of a nanotransferosome gel infused with Solanum xanthocarpum methanolic extract (SXE) to provide localized and regulated distribution. Thin-film hydration was used to create SXE-infused nanotransferosomes (SXE-NTFs), and a Box-Behnken design was used to improve them. Phospholipon 90G (X1), cholesterol (X2) and sodium cholate (X3) were chosen as the independent variables, and their effects on vesicle size (Y1), polydispersity index (PDI) (Y2) and the percentage of entrapment efficiency (EE) (Y3) were observed both individually and in combination. For the SXE-NTFs, the vesicle size was 146.3 nm, the PDI was 0.2594, the EE was 82.24 ± 2.64%, the drug-loading capacity was 8.367 ± 0.07% and the drug release rate was 78.86 ± 5.24%. Comparing the antioxidant activity to conventional ascorbic acid, it was determined to be 83.51 ± 3.27%. Ex vivo permeation tests revealed that the SXE-NTF gel (82.86 ± 2.38%) considerably outperformed the SXE gel (35.28 ± 1.62%) in terms of permeation. In addition, it seemed from the confocal laser scanning microscopy (CLSM) picture of the Wistar rat's skin that the rhodamine-B-loaded SXE-NTF gel had a higher penetration capability than the control. Dermatokinetic studies showed that the SXE-NTF gel had a better retention capability than the SXE gel. According to the experimental results, the SXE-NTF gel is a promising and successful topical delivery formulation.

Construction and Application of an Electrochemical Sensor for Determination of D-Penicillamine Based on Modified Carbon Paste Electrode

D-penicillamine (D-PA) is a sulfur-containing drug that has been used for various health conditions. However, like any medication, overdosing on D-PA can have adverse effects and may require additional treatment. Therefore, developing simple and sensitive methods for sensing D-PA can play a crucial role in improving its efficacy and reducing its side effects. Sensing technologies, such as electrochemical sensors, can enable accurate and real-time measurement of D-PA concentrations. In this work, we developed a novel electrochemical sensor for detecting D-PA by modifying a carbon paste electrode (CPE) with a multi-walled carbon nanotube-Co3O4 nanocomposite, benzoyl-ferrocene (BF), and ionic liquid (IL) (MWCNT-Co3O4/BF/ILCPE). Cyclic voltammetry (CV), differential pulse voltammetry (DPV), and chronoamperometry (CHA) were employed to explore the electrochemical response of D-PA on the developed sensor, the results of which verified a commendable electrochemical performance towards D-PA. Under optimized conditions, the developed sensor demonstrated a rapid response to D-PA with a linear dynamic range of 0.05 μM-100.0 μM, a low detection limit of 0.015 μM, and a considerable sensitivity of 0.179 μA μM-1. Also, the repeatability, stability, and reproducibility of the MWCNT-Co3O4/BF/ILCPE sensor were studied and showed good characteristics. In addition, the detection of D-PA in pharmaceutical and biological matrices yielded satisfactory recoveries and relative standard deviation (RSD) values.

Cytotoxicity Enhancement in Osteosarcoma with Multifunctional I-131 Radiotherapeutic Nanoparticles: In Vitro Three-Dimensional Spheroid Model and Release Kinetics Modeling

This novel radiolabeled chitosan nanoparticle, facilitated with curcumin, increased doxorubicin cytotoxicity and radiosensitivity to MG-63 osteosarcoma cells in a three-dimensional model. Delivery of the anti-epidermal growth factor receptor (EGFR) targeted carboxymethyl chitosan nanoparticles, directly labeled with Na131I (ICED-N), achieved deep tumor penetration in a three-dimensional model. Of three kinetic models, the Higuchi model more closely matched the experimental curve and release profiles. The anti-EGFR targeting resulted in a 513-fold greater targeting efficacy to MG-63 (EGFR+) cells than the control fibroblast (EGFR-) cells. The curcumin-enhanced ICED-N (4 × 0.925 MBq) fractionated-dose regime achieved an 18.3-fold increase in cell cytotoxicity compared to the single-dose (1 × 3.70 MBq) doxorubicin-loaded nanoparticle, and a 13.6-fold increase in cell cytotoxicity compared to the single-dose Na131I nanoparticle. Moreover, the ICED-N fractionated dose increased cells in the G2/M phase 8.78-fold, indicating the cell cycle arrest in the G2/M phase is associated with DNA fragmentation, and the intracellular damage is unable to be repaired. Overall, the results indicate that the fractionated dose was more efficacious than a single dose, and curcumin substantially increased doxorubicin cytotoxicity and amplified osteosarcoma cell radiosensitivity to Na131I.

Materials Nanoarchitectonics at Dynamic Interfaces: Structure Formation and Functional Manipulation

The next step in nanotechnology is to establish a methodology to assemble new functional materials based on the knowledge of nanotechnology. This task is undertaken by nanoarchitectonics. In nanoarchitectonics, we architect functional material systems from nanounits such as atoms, molecules, and nanomaterials. In terms of the hierarchy of the structure and the harmonization of the function, the material created by nanoarchitectonics has similar characteristics to the organization of the functional structure in biosystems. Looking at actual biofunctional systems, dynamic properties and interfacial environments are key. In other words, nanoarchitectonics at dynamic interfaces is important for the production of bio-like highly functional materials systems. In this review paper, nanoarchitectonics at dynamic interfaces will be discussed, looking at recent typical examples. In particular, the basic topics of "molecular manipulation, arrangement, and assembly" and "material production" will be discussed in the first two sections. Then, in the following section, "fullerene assembly: from zero-dimensional unit to advanced materials", we will discuss how various functional structures can be created from the very basic nanounit, the fullerene. The above examples demonstrate the versatile possibilities of architectonics at dynamic interfaces. In the last section, these tendencies will be summarized, and future directions will be discussed.

Encapsulation of propolis extracts in aqueous formulations by using nanovesicles of lipid and poly(styrene-alt-maleic acid)

Bee propolis has been used in alternative medicine to treat various diseases. Due to its limited water solubility, it is often used in combination with alcohol solvents, causing skin irritation and immune response. To solve this, the new drug delivery system, based on the lipid nanodiscs of 1,2-dimyristoyl-sn-glycero-3-phosphochline (DMPC) and poly(styrene-alt-maleic acid) (PSMA), were created in an aqueous media. At the excess polymer concentrations, the PSMA/DMPC complexation produced the very fine nanoparticles (18 nm). With the increased molar ratio of styrene to maleic acid (St/MA) in the copolymer structure, the lipid nanodisc showed the improved encapsulation efficiency (EE%), comparing to their corresponding aqueous formulations. The maximum value had reached to around 20% when using the 2:1 PSMA precursor. Based on the cytotoxicity test, these nanoparticles were considered to be non-toxic over the low dose administration region (<78 µg/mL). Instead, they possessed the ability to promote the Vero cell growth. The new PSMA/DMPC nanovesicles could thus be used to improve aqueous solubility and therapeutic effects of poorly water-soluble drugs, thus extending their use in modern therapies.

Bio-Inspired Nanomaterials for Micro/Nanodevices: A New Era in Biomedical Applications

Exploring bio-inspired nanomaterials (BINMs) and incorporating them into micro/nanodevices represent a significant development in biomedical applications. Nanomaterials, engineered to imitate biological structures and processes, exhibit distinctive attributes such as exceptional biocompatibility, multifunctionality, and unparalleled versatility. The utilization of BINMs demonstrates significant potential in diverse domains of biomedical micro/nanodevices, encompassing biosensors, targeted drug delivery systems, and advanced tissue engineering constructs. This article thoroughly examines the development and distinctive attributes of various BINMs, including those originating from proteins, DNA, and biomimetic polymers. Significant attention is directed toward incorporating these entities into micro/nanodevices and the subsequent biomedical ramifications that arise. This review explores biomimicry's structure-function correlations. Synthesis mosaics include bioprocesses, biomolecules, and natural structures. These nanomaterials' interfaces use biomimetic functionalization and geometric adaptations, transforming drug delivery, nanobiosensing, bio-inspired organ-on-chip systems, cancer-on-chip models, wound healing dressing mats, and antimicrobial surfaces. It provides an in-depth analysis of the existing challenges and proposes prospective strategies to improve the efficiency, performance, and reliability of these devices. Furthermore, this study offers a forward-thinking viewpoint highlighting potential avenues for future exploration and advancement. The objective is to effectively utilize and maximize the application of BINMs in the progression of biomedical micro/nanodevices, thereby propelling this rapidly developing field toward its promising future.

Hybrid Nanoplatforms Comprising Organic Nanocompartments Encapsulating Inorganic Nanoparticles for Enhanced Drug Delivery and Bioimaging Applications

Organic and inorganic nanoparticles (NPs) have attracted significant attention due to their unique physico-chemical properties, which have paved the way for their application in numerous fields including diagnostics and therapy. Recently, hybrid nanomaterials consisting of organic nanocompartments (e.g., liposomes, micelles, poly (lactic-co-glycolic acid) NPs, dendrimers, or chitosan NPs) encapsulating inorganic NPs (quantum dots, or NPs made of gold, silver, silica, or magnetic materials) have been researched for usage in vivo as drug-delivery or theranostic agents. These classes of hybrid multi-particulate systems can enable or facilitate the use of inorganic NPs in biomedical applications. Notably, integration of inorganic NPs within organic nanocompartments results in improved NP stability, enhanced bioavailability, and reduced systemic toxicity. Moreover, these hybrid nanomaterials allow synergistic interactions between organic and inorganic NPs, leading to further improvements in therapeutic efficacy. Furthermore, these platforms can also serve as multifunctional agents capable of advanced bioimaging and targeted delivery of therapeutic agents, with great potential for clinical applications. By considering these advancements in the field of nanomedicine, this review aims to provide an overview of recent developments in the use of hybrid nanoparticulate systems that consist of organic nanocompartments encapsulating inorganic NPs for applications in drug delivery, bioimaging, and theranostics.

Mitochondria-Targeted Delivery Strategy of Dual-Loaded Liposomes for Alzheimer's Disease Therapy

Liposomes modified with tetradecyltriphenylphosphonium bromide with dual loading of α-tocopherol and donepezil hydrochloride were successfully designed for intranasal administration. Physicochemical characteristics of cationic liposomes such as the hydrodynamic diameter, zeta potential, and polydispersity index were within the range from 105 to 115 nm, from +10 to +23 mV, and from 0.1 to 0.2, respectively. In vitro release curves of donepezil hydrochloride were analyzed using the Korsmeyer-Peppas, Higuchi, First-Order, and Zero-Order kinetic models. Nanocontainers modified with cationic surfactant statistically better penetrate into the mitochondria of rat motoneurons. Imaging of rat brain slices revealed the penetration of nanocarriers into the brain. Experiments on transgenic mice with an Alzheimer's disease model (APP/PS1) demonstrated that the intranasal administration of liposomes within 21 days resulted in enhanced learning abilities and a reduction in the formation rate of Aβ plaques in the entorhinal cortex and hippocampus of the brain.