Sprouting and Hydrolysis as Biotechnological Tools for Development of Nutraceutical Ingredients from Oat Grain and Hull

Biotechnological Tools for the Production of Low-FODMAP Wholegrain Wheat and Rye Cookies and Crackers

Fermentable oligosaccharides, di- and monosaccharides, and polyols defined as FODMAPs readily trigger the symptoms of irritable bowel syndrome (IBS), which affects up to 23% of the population, through several mechanisms. A low-FODMAP diet is a short-term solution due to significant nutrient deficiencies, especially in dietary fibre (DF). IBS patients must avoid cereals, especially wholegrain cereals such as wheat and rye, which are an important natural source of DF and therefore FODMAPs (part of soluble DF). This study is the first of its kind to employ biotechnological tools for the creation of wholegrain low-FODMAP cookies and crackers based on wholegrain wheat and rye flours with high FODMAP contents. Endogenous enzymes activated via prolonged dough resting and exogenously activated enzymes originating from chicory extract, wheat malt, and baker's yeast were employed. The prolonged dough resting time and the addition of wheat malt reduced the FODMAP content in the wholegrain wheat and rye cookies by 46% and 99.5%, respectively. The best result was achieved in the wholegrain wheat crackers, with a FODMAP content reduction of 59.3% based on the combination of a prolonged dough resting time and the addition of wheat malt and baker's yeast. In the wholegrain rye crackers, a prolonged resting time alone was sufficient to achieve an 83.6% reduction in the total oligosaccharide content.

Promoting the Emerging Role of Pulse By-Products as Valuable Sources of Functional Compounds and Novel Food Ingredients

The growth of the human population worldwide has increased food demand, generating the massive production of foods and consequently causing enormous production of waste every year. The indiscriminate exploitation of the already limited natural resources has also generated serious environmental and economic crises. The use, or reuse, of waste or by-products represents a viable solution to constrain the problem by promoting alternative routes of exploitation with multiple food and biotechnological applications. This review focuses on the most recent advances in the valorization of food by-products, with specific reference to legume-derived by-products. The main technological solutions for reintroducing and/or valorizing food waste are reported together with a critical discussion of the main pros and cons of each alternative, supported by practical case studies whenever available. First, the possibility to exploit the by-products as valuable sources of functional compounds is presented by reviewing both conventional and innovative extraction techniques tailored to provide functional extracts with multiple food, pharmaceutical, and biotechnological applications. Second, the possibility to valorize the by-products as novel food ingredients by inclusion in different formulations, either as a whole or as hydrolyzed/fermented derivatives, is also presented and discussed. To the best of our knowledge, several of the technological solutions discussed have found only limited applications for waste or by-products derived from the legume production chain; therefore, great efforts are still required to gain the full advantages of the intrinsic potential of pulse by-products.

High-Energy Fluidic Microfluidizer Produced Whole Germinant Oat Milk: Effects on Physical Properties and Nutritional Quality

Whole oat milk (WOM) was prepared from germinated oat by an innovatively designed high-energy fluidic microfluidizer (HEFM). The results indicated that germination treatment significantly raised the content of total protein, γ-aminobutyric acid, total phenolics, and reducing sugar, while it decreased the content of total starch and β-glucan. Oat with a germination time of 48 h had the best nutritional quality for producing WOM. The physical stability of the WOM prepared from germinated oat was effectively improved by HEFM treatment. The apparent viscosity increased, the instability index reduced from 0.67 to 0.37, and the precipitate weight ratio decreased from 13.54% to 9.51%. As the pressure of the HEFM increased from 0 to 120 MPa, the particle size decreased from 169.5 to 77.0 µm, which was helpful to improve the physical stability of the WOM. Meanwhile, the color of the WOM became whiter after the HEFM treatment. The content of β-glucan and soluble protein in the WOM significantly increased, which was due to the disruption of cells by the HEFM processing. The optimal HEFM pressure for WOM production is 120 MPa. This study provided a new way to produce whole oat milk with a high nutritional quality and good physical properties.

Comparative Bioaccesibility Study of Cereal-Based Nutraceutical Ingredients Using INFOGEST Static, Semi-Dynamic and Dynamic In Vitro Gastrointestinal Digestion

Efficient development of effective functional foods and nutraceuticals requires adequate estimation methods of the bioaccessibility of their bioactive compounds. Specially grain-based nutraceuticals and functional ingredients are often enriched in bound/low bioavailable bioactive phytochemicals. The objective of this work was to evaluate the differences in applying static or dynamic digestion models for the estimation of bioaccessibility of antioxidants present in cereal grain-based/fiber-rich ingredients produced using enzymatic hydrolysis and sprouting processes. Main liberated phenolic compounds, antioxidant activity (ABTS•+ and ORAC) and ferric reducing capacity were evaluated in the samples following three digestion protocols with differences based on their dynamism: static, semi-dynamic and dynamic. The samples digested with the dynamic method showed higher antioxidant and reducing capacities than those digested with the static and semi-dynamic protocols. The results obtained from the digests with the dynamic model showed a total phenol content (TPs) ranging from 1068.22 to 1456.65 μmol GAE 100 g-1 and antioxidant capacity values from 7944.62 to 15,641.90 μmol TE 100 g-1 (ORAC) and from 8454.08 to 11,002.64 μmol TE 100 g-1 (ABTS•+), with a reducing power ranging from 2103.32 to 2679.78 mmol Fe reduced 100 g-1 (FRAP). The dynamic character of the protocols used for developing bioactive cereal-based foods significantly affects the estimation of their bioaccessibility, probably giving a better approach to their potential bioavailability in in vivo systems.

Gomes PW, Fernández-Ochoa Á, Simões Larraz Ferreira M. Overview of the Metabolite Composition and Antioxidant Capacity of Seven Major and Minor Cereal Crops and Their Milling Fractions

Cereal grains play an important role in human health as a source of macro- and micronutrients, besides phytochemicals. The metabolite diversity was investigated in cereal crops and their milling fractions by untargeted metabolomics ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) of 69 samples: 7 species (barley, oat, pearl millet, rye, sorghum, triticale, and wheat), 23 genotypes, and 4 milling fractions (husk, bran, flour, and wholegrain). Samples were also analyzed by in vitro antioxidant activity. UHPLC-MS/MS signals were processed using XCMS, and metabolite annotation was based on SIRIUS and GNPS libraries. Bran and husk showed the highest antioxidant capacity and phenolic content/diversity. The major metabolite classes were phenolic acids, flavonoids, fatty acyls, and organic acids. Sorghum, millet, barley, and oats showed distinct metabolite profiles, especially related to the bran fraction. Molecular networking and chemometrics provided a comprehensive insight into the metabolic profiling of cereal crops, unveiling the potential of coproducts and super cereals such as sorghum and millet as sources of polyphenols.

Boosting Synergistic Antioxidant and Anti-Inflammatory Properties Blending Cereal-Based Nutraceuticals Produced Using Sprouting and Hydrolysis Tools

Nutraceuticals obtained from sprouted wheat and oat grains and processing by-products (bran and hull, respectively) naturally containing antioxidant and anti-inflammatory compounds were evaluated. The objective of this study was the development of a cereal-based nutraceutical formula combining extracts from sprouts and by-products and the exploration for potential synergetic effects in their bioactive properties. The antioxidant and anti-inflammatory capacities, glycemic index, phytic acid, and β-glucan of individual wheat bran hydrolysate (EH-WB), sprouted wheat (SW), oat hull hydrolysate (EH-OH), sprouted oat (SO), and combined ingredients (CI 1, CI 2, and CI3) were used to tailor an optimal nutraceutical formula. The three blend ingredients (CI 1, CI2, and CI3) were formulated at different ratios (EH-WB:SW:EH-OH:SO; 1:1:1:1, 2:1:2:1, and 1:2:1:2, w:w:w:w, respectively). The resulting mixtures showed total phenol (TPs) content ranging from 412.93 to 2556.66 µmol GAE 100 g-1 and antioxidant capacity values from 808.14 to 22,152.54 µmol TE 100 g-1 (ORAC) and 1914.05 to 7261.32 µmol TE 100 g-1 (ABTS•+), with Fe3+ reducing ability from 734. 02 to 8674.51 mmol reduced Fe 100 g-1 (FRAP) for the individual ingredients produced from EH-WB and EH-OH, where high antioxidant activity was observed. However, the anti-inflammatory results exhibited an interesting behavior, with a potentially synergistic effect of the individual ingredients. This effect was observed in CI2 and CI3, resulting in a higher ability to inhibit IL-6 and TNF-α than expected based on the anti-inflammatory values of their individual ingredients. Similar to the antioxidant properties, oat-based ingredients significantly contributed more to the anti-inflammatory properties of the overall mixture. This contribution is likely associated with the β-glucans and avenanthramides present in oats. To ensure the bioaccessibility of these ingredients, further studies including simulated digestion protocols would be necessary. The ingredient formulated with a 2:1 hydrolysate-to-sprout ratio was the most effective combination, reaching higher biological characteristics.

Impact of temperature and humidity conditions as abiotic stressors on the phytochemical fingerprint of oat (Avena sativa L.) sprouts

This study aimed to evaluate the effect of temperature (20, 25, and 30 °C) and relative humidity (RH, 50, 55, and 60 %) as abiotic stressors during oat (Avena sativa L.) germination using a 2-level factorial design with central point. UPLC-QToF-MSE identified eighty polyphenols, nine avenanthramides, twelve lignans, and five phytosterols Notably, 100 % germination was achieved at 25 °C/60 % RH from day 3, yielding the longest radicle size. The highest content of most phenolic acids, avenanthramides, and lignans occurred at 30 °C/65 % RH, where 100 % germination was attained by day 5, but with a shorter radicle size. The best flavonoid and phytosterol profle was obtained at 20 °C/55 % RH, achieving only a 67 % germination rate. Therefore, while these conditions enhance the bioactive compound profile, the associate decrease in germination metrics suggests potential distress effects. Consideration of both photochemical outcomes and germination yield is crucial for comprehensive assessments in future applications.

Comprehensive study of the effect of oat grain germination on the content of avenanthramides

The chemical profile and the levels of AVNs in oat varieties after germination have been examinated. In the present study, 12 distinct oat varieties were germinated for 0-192 h and a total of 28 AVNs and 3 AVN-hexosides were determined in these samples. Among them, three novel AVNs were synthesized (AVN 1a, AVN 2a, and AVN 2ad), characterized using NMR techniques (1D- and 2D-NMR), and assessed in real samples for the first time. The most abundant AVNs in the samples were AVN 2c, AVN 2p, AVN 2f, and their long-chained analogues AVN 2 cd, AVN 2pd, AVN 2fd, together representing 75-85 % of the total AVNs content. The highest total AVN level was observed on average after 48-72 h of germination time and it reached a value 1-1.2 mg/g. Out of 12 investigated oat varieties, CDC Boyer, Diadem, and Rozmar have proved to be the most suitable genotypes for germination.

Combined Strategy Using High Hydrostatic Pressure, Temperature and Enzymatic Hydrolysis for Development of Fibre-Rich Ingredients from Oat and Wheat By-Products

Wheat bran (WB) and oat hull (OH) are two interesting undervalued cereal processing sources rich in total dietary fibre (TDF) and other associated bioactive compounds, such as β-glucans and polyphenols. The aim of this study was to optimise a combination chemical (enzymes) and physical (high hydrostatic pressure-temperature) strategies to increase the bioaccessibility of bioactive compounds naturally bound to the bran and hull outer layers. WB and OH were hydrolysed using food-grade enzymes (UltraFloXL and Viscoferm, for WB and OH, respectively) in combination with HPP at different temperatures (40, 50, 60 and 70 °C) and hydrolysis either before or after HPP. Proximal composition, phytic acid, β-glucans, total phenolics (TPs) and total antioxidant activity (TAC) were evaluated to select the processing conditions for optimal nutritional and bioactive properties of the final ingredients. The application of the hydrolysis step after the HPP treatment resulted in lower phytic acid levels in both matrices (WB and OH). On the other hand, the release of β-glucan was more effective at the highest temperature (70 °C) used during pressurisation. After the treatment, the TP content ranged from 756.47 to 1395.27 µmol GAE 100 g-1 in WB, and OH showed values from 566.91 to 930.45 µmol GAE 100 g-1. An interaction effect between the temperature and hydrolysis timing (applied before or after HPP) was observed in the case of OH. Hydrolysis applied before HPP was more efficient in releasing OH TPs at lower HPP temperatures (40-50 °C); meanwhile, at higher HPP temperatures (60-70 °C), hydrolysis yielded higher TP values when applied after HPP. This effect was not observed in WB, where the hydrolysis was more effective before HPP. The TP results were significantly correlated with the TAC values. The results showed that the application of optimal process conditions (hydrolysis before HPP at 60 or 70 °C for WB; hydrolysis after HPP at 70 °C for OH) can increase the biological value of the final ingredients obtained.

Effect of Sprouting on Biomolecular and Antioxidant Features of Common Buckwheat (Fagopyrum esculentum)

Buckwheat is a pseudo-cereal widely grown and consumed throughout the world. Buckwheat is recognized as a good source of nutrients and, in combination with other health-promoting components, is receiving increasing attention as a potential functional food. Despite the high nutritional value of buckwheat, a variety of anti-nutritional features makes it difficult to exploit its full potential. In this framework, sprouting (or germination) may represent a process capable of improving the macromolecular profile, including reducing anti-nutritional factors and/or synthesizing or releasing bioactives. This study addressed changes in the biomolecular profile and composition of buckwheat that was sprouted for 48 and 72 h. Sprouting increased the content of peptides and free-phenolic compounds and the antioxidant activity, caused a marked decline in the concentration of several anti-nutritional components, and affected the metabolomic profile with an overall improvement in the nutritional characteristics. These results further confirm sprouting as a process suitable for improving the compositional traits of cereals and pseudo-cereals, and are further steps towards the exploitation of sprouted buckwheat as a high-quality ingredient in innovative products of industrial interest.

Assessment of Variability Sources in Grape Ripening Parameters by Using FTIR and Multivariate Modelling

The variability in grape ripening is associated with the fact that each grape berry undergoes its own biochemical processes. Traditional viticulture manages this by averaging the physicochemical values of hundreds of grapes to make decisions. However, to obtain accurate results it is necessary to evaluate the different sources of variability, so exhaustive sampling is essential. In this article, the factors "grape maturity over time" and "position of the grape" (both in the grapevine and in the bunch/cluster) were considered and studied by analyzing the grapes with a portable ATR-FTIR instrument and evaluating the spectra obtained with ANOVA-simultaneous component analysis (ASCA). Ripeness over time was the main factor affecting the characteristics of the grapes. Position in the vine and in the bunch (in that order) were also significantly important, and their effect on the grapes evolves over time. In addition, it was also possible to predict basic oenological parameters (TSS and pH with errors of 0.3 °Brix and 0.7, respectively). Finally, a quality control chart was built based on the spectra obtained in the optimal state of ripening, which could be used to decide which grapes are suitable for harvest.

Selection of Enzymatic Treatments for Upcycling Lentil Hulls into Ingredients Rich in Oligosaccharides and Free Phenolics

In this study, the comprehensive chemical characterization of red lentil hulls obtained from the industrial production of football and split lentils was described. The lentil hulls were rich in dietary fiber (78.43 g/100 g dry weight with an insoluble to soluble fiber ratio of 4:1) and polyphenols (49.3 mg GAE/g dry weight, of which 55% was bound phenolics), which revealed the suitability of this lentil by-product as a source of bioactive compounds with recognized antioxidant and prebiotic properties. The release of oligosaccharides and phenolic compounds was accomplished by enzymatic hydrolysis, microwave treatment and a combination of both technologies. The key role played by the selection of a suitable enzymatic preparation was highlighted to maximize the yield of bioactive compounds and the functional properties of the lentil hull hydrolysates. Out of seven commercial preparations, the one with the most potential for use in a commercial context was Pectinex^® Ultra Tropical, which produced the highest yields of oligosaccharides (14 g/100 g lentil hull weight) and free phenolics (45.5 mg GAE/100 g lentil hull weight) and delivered a four-fold increase in terms of the original antioxidant activity. Finally, this enzyme was selected to analyze the effect of a microwave-assisted extraction pretreatment on the yield of enzymatic hydrolysis and the content of free phenolic compounds and oligosaccharides. The integrated microwave and enzymatic hydrolysis method, although it increased the solubilization yield of the lentil hulls (from 25% to 34%), it slightly decreased the content of oligosaccharides and proanthocyanidins and reduced the antioxidant activity. Therefore, the enzymatic hydrolysis treatment alone was more suitable for producing a lentil hull hydrolysate enriched in potential prebiotics and antioxidant compounds.