Antimicrobial Active Packaging including Chitosan Films with Thymus vulgaris L. Essential Oil for Ready-to-Eat Meat

Biopolymers as Sustainable and Active Packaging Materials: Fundamentals and Mechanisms of Antifungal Activities

Developing bio-based and biodegradable materials has become important to meet current market demands, government regulations, and environmental concerns. The packaging industry, particularly for food and beverages, is known to be the world's largest consumer of plastics. Therefore, the demand for sustainable alternatives in this area is needed to meet the industry's requirements. This review presents the most commonly used bio-based and biodegradable packaging materials, bio-polyesters, and polysaccharide-based polymers. At the same time, a major problem in food packaging is presented: fungal growth and, consequently, food spoilage. Different types of antifungal compounds, both natural and synthetic, are explained in terms of structure and mechanism of action. The main uses of these antifungal compounds and their degree of effectiveness are detailed. State-of-the-art studies have shown a clear trend of increasing studies on incorporating antifungals in biodegradable materials since 2000. The bibliometric networks showed studies on active packaging, biodegradable polymers, films, antimicrobial and antifungal activities, essential oils, starch and polysaccharides, nanocomposites, and nanoparticles. The combination of the development of bio-based and biodegradable materials with the ability to control fungal growth promotes both sustainability and the innovative enhancement of the packaging sector.

Unveiling the Future of Meat Packaging: Functional Biodegradable Packaging Preserving Meat Quality and Safety

Meat quality and shelf life are important parameters affecting consumer perception and safety. Several factors contribute to the deterioration and spoilage of meat products, including microbial growth, chemical reactions in the food's constituents, protein denaturation, lipid oxidation, and discoloration. This study reviewed the development of functional packaging biomaterials that interact with food and the environment to improve food's sensory properties and consumer safety. Bioactive packaging incorporates additive compounds such as essential oils, natural extracts, and chemical substances to produce composite polymers and polymer blends. The findings showed that the incorporation of additive compounds enhanced the packaging's functionality and improved the compatibility of the polymer-polymer matrices and that between the polymers and active compounds. Food preservatives are alternative substances for food packaging that prevent food spoilage and preserve quality. The safety of food contact materials, especially the flavor/odor contamination from the packaging to the food and the mass transfer from the food to the packaging, was also assessed. Flavor is a key factor in consumer purchasing decisions and also determines the quality and safety of meat products. Novel functional packaging can be used to preserve the quality and safety of packaged meat products.

Synthetic polyploidization induces enhanced phytochemical profile and biological activities in Thymus vulgaris L. essential oil

Essential oil from Thymus vulgaris L. has valuable therapeutic potential that is highly desired in pharmaceutical, food, and cosmetic industries. Considering these advantages and the rising market demand, induced polyploids were obtained using oryzalin to enhance essential oil yield. However, their therapeutic values were unexplored. So, this study aims to assess the phytochemical content, and antimicrobial, antioxidant, and anti-inflammatory activities of tetraploid and diploid thyme essential oils. Induced tetraploids had 41.11% higher essential oil yield with enhanced thymol and γ-terpinene content than diploid. Tetraploids exhibited higher antibacterial activity against all tested microorganisms. Similarly, in DPPH radical scavenging assay tetraploid essential oil was more potent with half-maximal inhibitory doses (IC50) of 180.03 µg/mL (40.05 µg TE/mg) than diploid with IC50 > 512 µg/mL (12.68 µg TE/mg). Tetraploids exhibited more effective inhibition of in vitro catalytic activity of pro-inflammatory enzyme cyclooxygenase-2 (COX-2) than diploids at 50 µg/mL concentration. Furthermore, molecular docking revealed higher binding affinity of thymol and γ-terpinene towards tested protein receptors, which explained enhanced bioactivity of tetraploid essential oil. In conclusion, these results suggest that synthetic polyploidization using oryzalin could effectively enhance the quality and quantity of secondary metabolites and can develop more efficient essential oil-based commercial products using this induced genotype.

Effect of edible coatings and films enriched with plant extracts and essential oils on the preservation of animal-derived foods

Edible coatings and films for food preservation are becoming more popular thanks to their environmentally friendly properties and active ingredient-carrying ability. Their application can be effective in contrasting quality decay by limiting oxidation and deterioration of foods. Many reviews analyze the different compounds with which films and coatings can be created, their characteristics, and the effect when applied to food. However, the possibility of adding plant extracts and essential oils in edible coatings and films to preserve processed animal-derived products has been not exhaustively explored. The aim of this review is to summarize how edible coatings and films enriched with plant extracts (EXs) and essential oils (EOs) influence the physico-chemical and sensory features as well as the shelf-life of cheese, and processed meat and fish. Different studies showed that various EXs and EOs limited both oxidation and microbial growth after processing and during food preservation. Moreover, encapsulation has been found to be a valid technology to improve the solubility and stability of EOs and EXs, limiting strong flavor, controlling the release of bioactive compounds, and maintaining their stability during storage. Overall, the incorporation of EXs and EOs in edible coating and film to preserve processed foods can offer benefits for improving the shelf-life, limiting food losses, and creating a food sustainable chain.

An overview of the potential application of chitosan in meat and meat products

Chitosan is considered the second most ubiquitous polysaccharide next to cellulose. It has gained prominence in various industries including biomedicine, textile, pharmaceutical, cosmetic, and notably, the food industry over the last few decades. The polymer's continual attention within the food industry can be attributed to the increasing popularity of greener means of packaging and demand for foods incorporated with natural alternatives instead of synthetic additives. Its antioxidant, antimicrobial, and film-forming abilities reinforced by the polymer's biocompatible, biodegradable, and nontoxic nature have fostered its usage in food packaging and preservation. Microbial activity and lipid oxidation significantly influence the shelf-life of meat, resulting in unfavorable changes in nutritional and sensory properties during storage. In this review, the scientific studies published in recent years regarding potential applications of chitosan in meat products; and their effects on shelf-life extension and sensory properties are discussed. The utilization of chitosan in the form of films, coatings, and additives in meat products has supported the extension of shelf-life while inducing a positive impact on their organoleptic properties. The nature of chitosan and its compatibility with various materials make it an ideal biopolymer to be used in novel arenas of food technology.

Nanoemulsion-Based Multilayer Films for Ground Beef Preservation: Antimicrobial Activity and Physicochemical Properties

This study aimed to improve the physical, mechanical, and biological properties of a monolayer pectin (P) film containing nanoemulsified trans-Cinnamaldehyde (TC) by incorporating it between inner and outer layers of ethylcellulose (EC). The nanoemulsion had an average size of 103.93 nm and a zeta potential of -46 mV. The addition of the nanoemulsion increased the opacity of the film, reduced its moisture absorption capacity, and improved its antimicrobial activity. However, the tensile strength and elongation at break of the pectin films decreased after the incorporation of nanoemulsions. Multilayer films (EC/P/EC) showed a higher resistance to breaking and better extensibility compared to monolayer films. The antimicrobial activity of both mono and multilayer films was effective in inhibiting the growth of foodborne bacteria during storage of ground beef patties at 8 °C for 10 days. This study suggests that biodegradable antimicrobial multilayer packaging films can be effectively designed and applied in the food packaging industry.

White and honey Chlorella vulgaris: Sustainable ingredients with the potential to improve nutritional value of pork frankfurters without compromising quality

This study aimed to evaluate the effect of the chlorophyll-deficient microalgae mutants, honey (yellow) and white Chlorella vulgaris, (3%) on the nutritional, physicochemical, microbiological, and sensory characteristics of frankfurters. The presence of microalgae resulted in increased PUFA content and higher PUFA/SFA ratio, but lower n-6/n-3 ratio and lipid indices (P < 0.05). C. vulgaris inclusion in frankfurters increased (P < 0.05) Na, K, Ca, P, and Zn and improved the Na/K ratio, but lowered Mn, and in the case of white C. vulgaris, Cu content, compared to the control. The higher protein content decreased water release from emulsions elaborated with microalgae. White C. vulgaris inclusion decreased cohesiveness and springiness of the frankfurters. Due to the presence of pigment, microalgae inclusion led to a decrease in redness and an increase in yellowness of frankfurters. The presence of microalgae resulted in lower (P < 0.05) bacterial counts and did not affect TBARs during storage. The addition of microalgae in frankfurters produced acceptable sensory characteristics but resulted in lower scores compared to reference products.

Chitosan with Natural Additives as a Potential Food Packaging

Recently, the development of materials based on natural polymers have been observed. This is the result of increasing environmental degradation, as well as increased awareness and consumer expectations. Many industries, especially the packaging industry, face challenges resulting from legal regulations. Chitin is the most common biopolymer right after cellulose and is used to produce chitosan. Due to the properties of chitosan, such as non-toxicity, biocompatibility, as well as antimicrobial properties, chitosan-based materials are used in many industries. Many studies have been conducted to determine the suitability of chitosan materials as food packaging, and their advantages and limitations have been identified. Thanks to the possibility of modifying the chitosan matrix by using natural additives, it is possible to strengthen the antioxidant and antimicrobial activity of chitosan films, which means that, in the near future, chitosan-based materials will be a more environmentally friendly alternative to the plastic packaging used so far. The article presents literature data on the most commonly used natural additives, such as essential oils, plant extracts, or polysaccharides, and their effects on antimicrobial, antioxidant, mechanical, barrier, and optical properties. The application of chitosan as a natural biopolymer in food packaging extends the shelf-life of various food products while simultaneously reducing the use of synthetic plastics, which in turn will have a positive impact on the natural environment. However, further research on chitosan and its combinations with various materials is still needed to extent the application of chitosan in food packaging and bring its application to industrial levels.

The use of essential oils in chitosan or cellulose-based materials for the production of active food packaging solutions: a review

In recent decades, interest in sustainable food packaging systems with additional functionality, able to increase the shelf life of products, has grown steadily. Following this trend, the present review analyzes the state of the art of this active renewable packaging. The focus is on antimicrobial systems containing nanocellulose and chitosan, as support for the incorporation of essential oils. These are the most sustainable and readily available options to produce completely natural active packaging materials. After a brief overview of the different active packaging technologies, the main features of nanocellulose, chitosan, and of the different essential oils used in the field of active packaging are introduced and described. The latest findings about the nanocellulose- and chitosan-based active packaging are then presented. The antimicrobial effectiveness of the different solutions is discussed, focusing on their effect on other material properties. The effect of the different inclusion strategies is also reviewed considering both in vivo and in vitro studies, in an attempt to understand more promising solutions and possible pathways for further development. In general, essential oils are very successful in exerting antimicrobial effects against the most diffused gram-positive and gram-negative bacteria, and affecting other material properties (tensile strength, water vapor transmission rate) positively. Due to the wide variety of biopolymer matrices and essential oils available, it is difficult to create general guidelines for the development of active packaging systems. However, more attention should be dedicated to sensory analysis, release kinetics, and synergetic action of different essential oils to optimize the active packaging on different food products. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Chitosan Edible Films and Coatings with Added Bioactive Compounds: Antibacterial and Antioxidant Properties and Their Application to Food Products: A Review

Chitosan is the deacetylated form of chitin regarded as one of the most abundant polymers and due to its properties, both chitosan alone or in combination with bioactive substances for the production of biodegradable films and coatings is gaining attention in terms of applications in the food industry. To enhance the antimicrobial and antioxidant properties of chitosan, a vast variety of plant extracts have been incorporated to meet consumer demands for more environmentally friendly and synthetic preservative-free foods. This review provides knowledge about the antioxidant and antibacterial properties of chitosan films and coatings enriched with natural extracts as well as their applications in various food products and the effects they had on them. In a nutshell, it has been demonstrated that chitosan can act as a coating or packaging material with excellent antimicrobial and antioxidant properties in addition to its biodegradability, biocompatibility, and non-toxicity. However, further research should be carried out to widen the applications of bioactive chitosan coatings to more foods and industries as well was their industrial scale-up, thus helping to minimize the use of plastic materials.

Effect of Thymus vulgaris L. essential oil and thymol on the microbiological properties of meat and meat products: A review

Since foodborne diseases are often considered as one of the biggest public health threats worldwide, effective preservation strategies are needed to inhibit the growth of undesirable microorganisms in food commodities. Up to now, several techniques have been adopted for the production of safe and high-quality products. Although the traditional methods can improve the reliability, safety, and shelf-life of food, some of them cannot be applied without rising health concerns. Thereby, the addition of various phytochemicals has gained much attention during the last decades, especially for meat products that may be contaminated with pathogenic and spoilage organisms. Thyme (Thymus vulgaris L.), as an important medicinal and culinary herb, is a promising source of bioactive compounds that have a great impact on the microbiological stability of meat by suppressing the undesirable microflora. However, the use of these antimicrobials is still facing difficulties due to their aromatic properties and variable efficacy against targeted species. In this paper, we provide an overview on the potential effects of thyme essential oil (EO) and thymol as bio-preservative agents in meat products. Furthermore, this paper provides insights into the limitations and current challenges of the addition of EOs and their constituents to meat commodities and suggests viable solutions that can improve the applicability of these phytochemicals.

Encapsulation of Essential Oils in Nanocarriers for Active Food Packaging

Active packaging improves a packaging system's effectiveness by actively integrating additional components into the packaging material or the headspace around the packaging. Consumer demand and awareness have grown enough to replace chemical agents with natural active agents. Essential oils (EOs) are extensively distributed throughout nature but at low levels and sometimes with poor recovery yields, which poses an issue with their application in food. Due to the instability of EOs when added directly into a food product, they require encapsulation before being added to a packaging matrix such as liposomes, solid-lipid nanoparticles, nano-emulsions, cyclodextrins, and nanostructured lipid nano-carriers. This article is focused on the encapsulation of EOs in different types of nanocarriers. Nanocarriers can improve the efficiency of active substances by providing protection, stability, and controlled and targeted release. The advantages of the many types of nanocarriers that contain active substances that can be used to make antibacterial and antioxidant biopolymeric-based active packaging are discussed. A nanocarrier-encapsulated EO enables the controlled release of oil, stabilizing the packaging for a longer duration.

Edible Polymers and Secondary Bioactive Compounds for Food Packaging Applications: Antimicrobial, Mechanical, and Gas Barrier Properties

Edible polymers such as polysaccharides, proteins, and lipids are biodegradable and biocompatible materials applied as a thin layer to the surface of food or inside the package. They enhance food quality by prolonging its shelf-life and avoiding the deterioration phenomena caused by oxidation, humidity, and microbial activity. In order to improve the biopolymer performance, antimicrobial agents and plasticizers are also included in the formulation of the main compounds utilized for edible coating packages. Secondary natural compounds (SC) are molecules not essential for growth produced by some plants, fungi, and microorganisms. SC derived from plants and fungi have attracted much attention in the food packaging industry because of their natural antimicrobial and antioxidant activities and their effect on the biofilm's mechanical properties. The antimicrobial and antioxidant activities inhibit pathogenic microorganism growth and protect food from oxidation. Furthermore, based on the biopolymer and SC used in the formulation, their specific mass ratio, the peculiar physical interaction occurring between their functional groups, and the experimental procedure adopted for edible coating preparation, the final properties as mechanical resistance and gas barrier properties can be opportunely modulated. This review summarizes the investigations on the antimicrobial, mechanical, and barrier properties of the secondary natural compounds employed in edible biopolymer-based systems used for food packaging materials.

A Comprehensive Review of the Development of Carbohydrate Macromolecules and Copper Oxide Nanocomposite Films in Food Nanopackaging

Background. Food nanopackaging helps maintain food quality against physical, chemical, and storage instability factors. Copper oxide nanoparticles (CuONPs) can improve biopolymers' mechanical features and barrier properties. This will lead to antimicrobial and antioxidant activities in food packaging to extend the shelf life. Scope and Approach. Edible coatings based on carbohydrate biopolymers have improved the quality of packaging. Several studies have addressed the role of carbohydrate biopolymers and incorporated nanoparticles to enhance food packets' quality as active nanopackaging. Combined with nanoparticles, these biopolymers create film coatings with an excellent barrier property against transmissions of gases such as O2 and CO2. Key Findings and Conclusions. This review describes the CuO-biopolymer composites, including chitosan, agar, cellulose, carboxymethylcellulose, cellulose nanowhiskers, carrageenan, alginate, starch, and polylactic acid, as food packaging films. Here, we reviewed different fabrication techniques of CuO biocomposites and the impact of CuONPs on the physical, mechanical, barrier, thermal stability, antioxidant, and antimicrobial properties of carbohydrate-based films.

Plant Extracts for the Control of Listeria monocytogenes in Meat Products

The antimicrobial activity of garlic (Allium sativum L.) and onion (Allium cepa L.) plant active extracts was determined against Listeria monocytogenes in two meat products. Samples of sausages “cacciatore” and cooked ham in vacuum-packaged slices were artificially contaminated, and the presence of Listeria was evaluated during the sausages ripening and throughout the shelf-life of the cooked ham. The test carried out on sausages did not show differences among treated and untreated samples. The antagonistic activity of the plant extracts against the pathogen was probably hidden by the competition from the sausages microbial flora and the pH and the water activity (aw) decrease. On the other hand, the plant extracts determined an initial reduction of about 1.00 log cfu/g of the L. monocytogenes viable count in the cooked ham slices contaminated with 103 cfu/g, but the best result was obtained with the contamination of 102 cfu/g of L. monocytogenes. In addition to the pathogen’s initial decrease, we observed an extension of the lag phase and a reduction of the Listeria growth rate. Considering that the presence of L. monocytogenes during the slicing phase of the cooked ham does not exceed 10 cfu/g, the use of plant extracts can lead to complete pathogen elimination.

Green Coating Polymers in Meat Preservation

Edible coatings, including green polymers are used frequently in the food industry to improve and preserve the quality of foods. Green polymers are defined as biodegradable polymers from biomass resources or synthetic routes and microbial origin that are formed by mono- or multilayer structures. They are used to improve the technological properties without compromising the food quality, even with the purpose of inhibiting lipid oxidation or reducing metmyoglobin formation in fresh meat, thereby contributing to the final sensory attributes of the food and meat products. Green polymers can also serve as nutrient-delivery carriers in meat and meat products. This review focuses on various types of bio-based biodegradable polymers and their preparation techniques and applications in meat preservation as a part of active and smart packaging. It also outlines the impact of biodegradable polymer films or coatings reinforced with fillers, either natural or synthesized, via the green route in enhancing the physicochemical, mechanical, antimicrobial, and antioxidant properties for extending shelf-life. The interaction of the package with meat contact surfaces and the advanced polymer composite sensors for meat toxicity detection are further considered and discussed. In addition, this review addresses the research gaps and challenges of the current packaging systems, including coatings where green polymers are used. Coatings from renewable resources are seen as an emerging technology that is worthy of further investigation toward sustainable packaging of food and meat products.

Recombinant production and characterisation of two chitinases from Rasamsonia emersonii, and assessment of their potential industrial applicability

Rasamsonia emersonii (previously Talaromyces emersonii) is a thermophilic filamentous fungus displaying optimum growth at 45 °C. It has a history of use in commercial food enzyme production. Its unfractionated chitinolytic secretome was partially characterised in the early 1990s; however, no individual chitinase from this source has been described in literature previously. This study describes two GH18 chitinases originating from the R. emersonii genome, expressed in the methylotrophic yeast P. pastoris. Chit1 comprises of a GH18 catalytic domain and Chit2 comprises of a GH18 catalytic domain and a chitin-binding motif at the C-terminal. The chitinases were expressed as glycoproteins. The apparent molecular weight of Chit1 was 35.8-42.1 kDa with a smearing tail associated with glyco-sidechains visible up to 72.2 kDa. This became two bands of 30.8 and 29.0 kDa upon de-glycosylation. The apparent molecular weight of Chit2 was 50.4 kDa, reducing to 48.2 kDa upon de-glycosylation. Both chitinases displayed endo-chitinase and chitobiosidase activity, temperature optima of 50-55 °C and low pH optima (pH 4.5 or lower); Chit1 displayed a pH optimum of 3.5, retaining > 60% maximum activity at pH 2.2, a pH range lower than most enzymes of fungal origin. Chit2 displayed the highest chitin-degrading ability at 3456 µmol/mg on 4-NP-triacetylchitotriose, but lost activity faster than Chit1, which displayed 403 µmol/mg on the same substrate. The predicted D values (time required to reduce the enzyme activity to 10% of its original value at 50 °C) were 19.2 and 2.3 days for Chit1 and Chit2, respectively. Thus, Chit1 can be considered one of few hyperthermostable chitinase enzymes described in literature to date. Their physicochemical properties render these chitinases likely suitable for shrimp chitin processing including one-step chitin hydrolysis and alternative sustainable protein processing and the attractive emerging application of mushroom food waste valorisation.Key points• Two GH18 chitinases originating from the industrially relevant thermophilic fungus R. emersonii were cloned and expressed in P. pastoris.• The purified recombinant chitinases showed low pH and high temperature optima and appreciable thermostability at industrially relevant temperatures.• The chitinases displayed characteristics that indicate their likely suitability to several industrial applications including sustainable alternative protein processing, food waste valorisation of commercial mushroom production and one-step shrimp chitin processing.

Overview on Innovative Packaging Methods Aimed to Increase the Shelf-Life of Cook-Chill Foods

The consumption of meals prepared, packaged, and consumed inside and outside the home is increasing globally. This is a result of rapid changes in lifestyles as well as innovations in advanced food technologies that have enabled the food industry to produce more sustainable and healthy fresh packaged convenience foods. This paper presents an overview of the technologies and compatible packaging systems that are designed to increase the shelf-life of foods prepared by cook–chill technologies. The concept of shelf-life is discussed and techniques to increase the shelf life of products are presented including active packaging strategies.

Antimicrobial Food Packaging with Biodegradable Polymers and Bacteriocins

Innovations in food and drink packaging result mainly from the needs and requirements of consumers, which are influenced by changing global trends. Antimicrobial and active packaging are at the forefront of current research and development for food packaging. One of the few natural polymers on the market with antimicrobial properties is biodegradable and biocompatible chitosan. It is formed as a result of chitin deacetylation. Due to these properties, the production of chitosan alone or a composite film based on chitosan is of great interest to scientists and industrialists from various fields. Chitosan films have the potential to be used as a packaging material to maintain the quality and microbiological safety of food. In addition, chitosan is widely used in antimicrobial films against a wide range of pathogenic and food spoilage microbes. Polylactic acid (PLA) is considered one of the most promising and environmentally friendly polymers due to its physical and chemical properties, including renewable, biodegradability, biocompatibility, and is considered safe (GRAS). There is great interest among scientists in the study of PLA as an alternative food packaging film with improved properties to increase its usability for food packaging applications. The aim of this review article is to draw attention to the existing possibilities of using various components in combination with chitosan, PLA, or bacteriocins to improve the properties of packaging in new food packaging technologies. Consequently, they can be a promising solution to improve the quality, delay the spoilage of packaged food, as well as increase the safety and shelf life of food.

Fabrication of bioactive binary composite film based on gelatin/chitosan incorporated with cinnamon essential oil and rutin

Chitosan/gelatin-based functional films were fabricated by incorporating cinnamon essential oil (CEO) and rutin for active packaging application. The functional fillers were evenly distributed in the polymer matrix and formed a film compatible with the chitosan/gelatin polymer matrix. However, the functional material did not affect the physical properties such as mechanical, thermal, and water vapor barrier properties of the film but exhibited high light transmittance with enhanced UV blocking properties. The rutin release from the composite film was evaluated using various food simulant solutions and found that rutin was released faster in acidic and alcoholic solutions. The chitosan/gelatin-based composite film showed potent antimicrobial and antioxidant activities. In addition, the combined use of CEO and rutin showed a synergistic effect of functional properties. The CEO and rutin-added chitosan/gelatin-based films with improved physical and functional properties can be used for active food packaging applications.

Basil Essential Oil: Composition, Antimicrobial Properties, and Microencapsulation to Produce Active Chitosan Films for Food Packaging

The essential oil (EO) from basil-Ocimum basilicum-was characterized, microencapsulated by vibration technology, and used to prepare a new type of packaging system designed to extend the food shelf life. The basil essential oil (BEO) chemical composition and antimicrobial activity were analyzed, as well as the morphological and biological properties of the derived BEO microcapsules (BEOMC). Analysis of BEO by gas chromatography demonstrated that the main component was linalool, whereas the study of its antimicrobial activity showed a significant inhibitory effect against all the microorganisms tested, mostly Gram-positive bacteria. Moreover, the prepared BEOMC showed a spheroidal shape and retained the EO antimicrobial activity. Finally, chitosan-based edible films were produced, grafted with BEOMC, and characterized for their physicochemical and biological properties. Since their effective antimicrobial activity was demonstrated, these films were tested as packaging system by wrapping cooked ham samples during 10 days of storage, with the aim of their possible use to extend the shelf life of the product. It was demonstrated that the obtained active film can both control the bacterial growth of the cooked ham and markedly inhibit the pH increase of the packaged food.

The influence of PBAT content in the nanocapsules preparation and its effect in essential oils release

Nanoencapsulation provides new alternatives for the food industry, enabling a controlled and slow release of active antimicrobial agents, such as essential oils (EO). Poly (butylene adipate-co-terephthalate) (PBAT) nanocapsules loaded with linalool EO were prepared using an extrusion method with 1, 3, and 5% w/v (PBAT to chloroform). Nanocapsules' sizes ranged from 100 to 250 nm and were spherical. The release profile was studied using an ethanoic medium over 24 h, and according to the Korsmeyer-Peppas model, a Fick diffusion mechanism was involved. FT-IR and thermogravimetric analyses confirmed EO encapsulation with an encapsulation efficiency of 55%, 71%, and 74% for 1, 3, and 5%, respectively. The results indicated that encapsulation depended on organic phase concentration, with higher PBAT contents achieving better results. The resulting nanocapsules had antimicrobial activity against E. coli, which could be extended to develop active packaging systems.

Application of Supercritical Solvent Impregnation for Production of Zeolite Modified Starch-Chitosan Polymers with Antibacterial Properties

In the present study, supercritical solvent impregnation (SSI) has been applied to incorporate thymol into bio-composite polymers as a potential active packaging material. Thymol, a natural component with a proven antimicrobial activity, was successfully impregnated into starch-chitosan (SC) and starch-chitosan-zeolite (SCZ) films using supercritical carbon dioxide (scCO₂) as a solvent. Experiments were performed at 35 °C, pressures of 15.5 and 30 MPa, and an impregnation time in the range of 4–24 h. The highest impregnation yields of SC films with starch to chitosan mass ratios of 1:1 and 1:2 were 10.80% and 6.48%, respectively. The addition of natural zeolite (15–60%) significantly increased the loading capacity of films enabling thymol incorporation in a quantity of 16.7–27.3%. FTIR and SEM analyses were applied for the characterization of the films. Mechanical properties and water vapor permeability of films before and after the impregnation were tested as well. Thymol release kinetics in deionized water was followed and modeled by the Korsmeyer-Peppas and Weibull model. SCZ films with thymol loading of approximately 24% exhibited strong antibacterial activity against E. coli and methicillin-resistant Staphylococcus (S.) aureus (MRSA).

The Effects of Processing and Preservation Technologies on Meat Quality: Sensory and Nutritional Aspects

This review describes the effects of processing and preservation technologies on sensory and nutritional quality of meat products. Physical methods such as dry aging, dry curing, high pressure processing (HPP), conventional cooking, sous-vide cooking and 3D printing are discussed. Chemical and biochemical methods as fermentation, smoking, curing, marination, and reformulation are also reviewed. Their technical limitations, due to loss of sensory quality when nutritional value of these products is improved, are presented and discussed. There are several studies focused either on the nutritional or sensorial quality of the processed meat products, but more studies with an integration of the two aspects are necessary. Combination of different processing and preservation methods leads to better results of sensory quality; thus, further research in combinations of different techniques are necessary, such that the nutritional value of meat is not compromised.

Polysaccharide and Protein Films with Antimicrobial/Antioxidant Activity in the Food Industry: A Review

From an economic point of view, the spoilage of food products during processing and distribution has a negative impact on the food industry. Lipid oxidation and deterioration caused by the growth of microorganisms are the main problems during storage of food products. In order to reduce losses and extend the shelf-life of food products, the food industry has designed active packaging as an alternative to the traditional type. In the review, the benefits of active packaging materials containing biopolymers (polysaccharides and/or proteins) and active compounds (plant extracts, essential oils, nanofillers, etc.) are highlighted. The antioxidant and antimicrobial activity of this type of film has also been highlighted. In addition, the impact of active packaging on the quality and durability of food products during storage has been described.

Antimicrobial-loaded nanocarriers for food packaging applications

Increasing the demands of consumers for organic and safer foods has led to applying new technologies for food preservation. Active packaging (AP) containing natural antimicrobial agents is a good candidate for promoting the shelf life of food products. The efficiency of AP has been enhanced through nanoencapsulation methods, in which antimicrobial-loaded nanocarriers could provide a controlled release of antimicrobial active packaging for keeping the quality of foods during storage. The main objective of this review is to introduce common methods for designing novel encapsulation delivery systems offering controlled release of antimicrobials in the AP systems. The common nanocarriers for enveloping antimicrobial agents are described and the current state of art in the application of nanoencapsulated antimicrobials in development of antimicrobial APs have been summarized and tabulated. Incorporation of a carrier loaded with natural antimicrobial agents is the most effective method for developing AP in the food packaging sector which has become possible by using nanoencapsulated antimicrobials in films or coating structures, instead of using their free form. Nanoencapsulation approaches provide many advantages including protection against environmental stresses, release control, and improving the solubility and absorption of natural antimicrobials in AP, which are the main achievements overcoming the barriers for using natural antimicrobials in food packaging.

Essential Oil Based PVP-CMC-BC-GG Functional Hydrogel Sachet for 'Cheese': Its Shelf Life Confirmed with Anthocyanin (Isolated from Red Cabbage) Bio Stickers

‘Gouda cheese’ is one of the most popular varieties of cheese eaten worldwide. The preservation problem of gouda arises due to microbial contamination and infestation. Therefore, essential oil (EO) based PVP-CMC-BC-GG hydrogel film was prepared to solve the problem and to extend the shelf-life of ‘Gouda cheese’. Anthocyanin (isolated from red cabbage) based pH stickers are integrated into the packaging system to recognize the spoilage of ‘cheese’. EOs (clove and/or cinnamon) are added to PVP-CMC-BC-GG hydrogel film to improve its antimicrobial, physical, mechanical, and thermal properties as well as shelf-life of cheese. The films are assessed based on their physical, structural, and functional properties, real-time assessment on cheese, and biodegradability. The results revealed that although the addition of oils to the PVP-CMC-BC-GG hydrogel films enhanced its mechanical, hydrophobic, and antimicrobial properties, the biodegradability of PVP-CMC-BC-GG films declined with the addition of EOs. The thermal properties remained the same irrespective of the addition of EOs. The shelf life of cheese was extended for more than 10–12 days, inside the PVP-CMC-BC-GG hydrogel sachet compared to the conventional PE packaging system. Hence the use of the PVP-CMC-BC-GG sachet (containing EO or without EO) is recommended for cheese packaging along with the use of PVP-CMC-BC-GG anthocyanin bio stickers for monitoring the quality of cheese.

Materiality of Edible Film Packaging in Muscle Foods: A Worthwhile Conception

Muscle foods are extremely extensive food products that are relished throughout the world. They are known for their exclusive nutritional content and bio-availability however, at the same time, they also provide apposite media for the growth of pathogenic and spoilage microorganisms. Packaging seems to be a substantial approach to overcome this problem, but most of the packaging involves the usage of non-biodegradable and non-renewable material like plastic, nylon, polyester, etc. The alarming situation caused by synthetic material has been realized worldwide and several scientists, agencies, and the food industry are working globally to explore materials that are derived from the natural source. Biodegradable films are an excellent alternative to conventional plastics. These biodegradable films and coatings are derived from various biological sources and are receiving considerable importance in recent years. Different meat and meat product needs specific packaging condition and these active, composite bio-based films are having a wide potential in the meat sector. This review gathers the research and findings over the period of time-related to biodegradable edible film applied to muscle foods.

Chitosan Composites in Packaging Industry-Current Trends and Future Challenges

Chitosan-based composites play an important role in food packaging applications and can be used either as films or as edible coatings. Due to their high costs and lower performance (i.e., lower barrier against water vapor, thermal, and mechanical properties) when compared to the traditional petroleum-based plastics, the use of such biopolymers in large-scale is still limited. Several approaches of chitosan composites in the packaging industry are emerging to overcome some of the disadvantages of pristine polymers. Thus, this work intends to present the current trends and the future challenges towards production and application of chitosan composites in the food packaging industry.

Food Safety through Natural Antimicrobials

Microbial pathogens are the cause of many foodborne diseases after the ingestion of contaminated food. Several preservation methods have been developed to assure microbial food safety, as well as nutritional values and sensory characteristics of food. However, the demand for natural antimicrobial agents is increasing due to consumers' concern on health issues. Moreover, the use of antibiotics is leading to multidrug resistant microorganisms reinforcing the focus of researchers and the food industry on natural antimicrobials. Natural antimicrobial compounds from plants, animals, bacteria, viruses, algae and mushrooms are covered. Finally, new perspectives from researchers in the field and the interest of the food industry in innovations are reviewed. These new approaches should be useful for controlling foodborne bacterial pathogens; furthermore, the shelf-life of food would be extended.

Antimicrobial and Antioxidant Active Food Packaging: Technological and Scientific Prospection

BACKGROUND

Antimicrobial and antioxidant packaging play an important role in the food industry by ensuring food quality and prolonging the product's shelf life. Therefore, this scientific survey covers the technological domain in the active food packaging development processes and types of packaging.

METHODS

This paper aims to provide a review of patents and scientific publications on active packaging with antimicrobial and antioxidant properties in order to show technological advances in this field of knowledge and its applicability in the food industry.

RESULTS

The patent review indicates an increase in the number of documents deposited in recent decades regarding various types of packaging formulations, particularly active packaging to preserve foods and their shelf life. In the last few decades, the scientific publication also includes several studies concerning the development of active food packaging using natural products with antimicrobial and antioxidant proprieties. Overall, the results show the advantages of incorporating natural products into polymer matrices to develop industrial packaging, providing a safe and high-quality food product to the consumer. On the other hand, the review also highlighted lack of cooperation between inventors and companies of active packaging development.

CONCLUSION

Further study in this regard would help provide data form research and patents on the active food-packaging field as well as economic issues, indicating the global development scenario of this innovative area.

In vitro and in vivo evaluation of thyme (Thymus vulgaris) essential oil as an alternative for antibiotic in quail diet1

The thyme (Thymus vulgaris) essential oil was assessed as antibiotic growth promoter replacement in quail chick diet and in vitro test. In total, 250-d-old Japanese quail chicks (mixed sex) were allocated into 5 dietary treatments of 5 replications (6 females and 4 males in each cage with the size of 40× 90× 25 cm) under a completely randomized design. The dietary treatments were included the control diet, control diet without any additive, control diet plus 100 ppm flavophospholipol as an antibiotic growth promoter, control diet plus 200 ppm TVE, control diet plus 300 ppm TVE, and control diet plus 400 ppm T. vulgaris essential (TVE) oil. Feed intake, BW gain, feed conversion ratio (FCR), organs weight, morphology of intestine, serum lipids, and microbial population were measured on day 35. Lipid oxidation of stored muscle tissue was measured by TBARS test. GC-MS assay, DPPH method, and well diffusion method were evaluated for determination of components, antioxidant, and antimicrobial properties, respectively. FCR improved significantly in 400 ppm TVE compared with 200 and 300 ppm TVE (P < 0.05). The serum triglyceride decreased significantly in both sexes receiving 400 ppm TVE compared with control. Villi height increased significantly in duodenum accompanied by decreasing crypt dept at all TVE levels compared with control and antibiotic. The breast muscle tissue of quail fed on 300 and 400 ppm TVE reduced the rate of oxidation during refrigerated storage compared with control. Thymol was the main component (35.40%) of the thymus oil. The considerable antioxidant activity of TVE was identified by IC50 of 58.48 µg/mL. Moreover, zones of growth inhibition of Gram-positive bacteria and Escherichia coli were numerically greater in different doses of TVE than antibiotics. Therefore, The TVE is suitable alternative component for antibiotic growth promoters by dosing consideration. However, it is possible that antibiotic resistance would increase for these natural compounds along the time.

The Influence of Accelerated UV-A and Q-SUN Irradiation on the Antibacterial Properties of Hydrophobic Coatings Containing Eucomis comosa Extract

The purpose of this research was to examine the antimicrobial properties against Gram-positive bacteria, as well as the water vapour characteristic of polylactic acid (PLA) films covered with a methyl⁻hydroxypropyl⁻cellulose (MHPC)/cocoa butter carrier containing Eucomis comosa extract as an active substance. The second purpose of the study was to evaluate the influence of accelerated UV-A and Q-SUN irradiation (UV-aging) on the antimicrobial properties and the barrier characteristic of the coatings. The results of the study revealed that MHPC/cocoa butter coatings had no influence on the growth of Staphylococcus aureus, Bacillus cereus, and Bacillus atrophaeus. MHPC/cocoa butter coatings containing E. comosa extract reduced the number of bacterial strains. MHPC/cocoa butter coatings also decreased the water vapour permeability of PLA. It was shown that accelerated UV-A and Q-SUN irradiations altered the chemical composition of the coatings containing cocoa butter. Despite the alteration of the chemical composition of the layers, the accelerated Q-SUN and UV-A irradiation had no influence on the antimicrobial properties of E. comosa extract coatings against S. aureus and B. cereus. It was found that only Q-SUN irradiation decreased the coating activity with an extract against B. atrophaeus, though this was to a small degree.

Intermolecular interaction and solid state characterization of abietic acid/chitosan solid dispersions possessing antimicrobial and antioxidant properties

The aim of this work was to prepare and characterize solid dispersions of abietic acid (AB) and chitosan (CS) to investigate how formulation of the mixture may help in the battle against microbial colonization in different areas, such as the biomedical field or the food industry. Solid dispersions were characterized by differential scanning calorimetry, infrared spectroscopy, Raman spectroscopy, polarized optical microscopy, zeta potential and size analysis. The data showed that the dispersion/solvent evaporation method formed solid dispersions in which abietic acid was molecularly dispersed in the carrier. A synergistic effect between the two components in terms of antioxidant and antimicrobial properties was found, especially in the formulations obtained with 1/1 AB/CS molar ratio. Interestingly, the aggregation state (amorphous/crystalline) of AB seemed to affect the antimicrobial activity of the formulation, suggesting increased bioactivity when the drug was in the amorphous state. These findings, together with the demonstrated biocompatibility of the formulations, seem to open promising perspectives for a successful application of the developed AB/CS formulations in the biomedical field or in the food industry.