Reutilization of Food Waste: One-Step Extration, Purification and Characterization of Ovalbumin from Salted Egg White by Aqueous Two-Phase Flotation

Bioactives derived from egg by-products: Preparation, health benefits, and high-value-added applications

Eggs are widely known for their rich nutritional profile, resulting in the production of numerous egg by-products. Recycling of egg by-products has become a key for achieving sustainable development. This work reviews recent advances on preparation of bioactives derived from egg by-products and their health benefits from the perspective of by-product valorization. Meanwhile, the potential for high-value-added applications of egg by-products is discussed. Egg by-products contain bioactives (proteins, minerals, glycosaminoglycans, and bioactive peptides) with various health benefits, including antioxidant, anti-inflammatory, metal ion-chelating, and protective activity against metabolic syndrome, but mechanisms behind these phenomena are still unclear. Therefore, combination of multiple models and multiple omics to reveal functional mechanisms of the bioactives is imperative, and further clinical trials are necessary to evaluate their bioaccessibility. Additionally, research on the product formulation based on egg by-products or their derived bioactives could expand the valorization of the by-products and contribute to global sustainable development.

Modification of the Endoplasmic Reticulum to Enhance Ovalbumin Secretion in Saccharomyces cerevisiae

Ovalbumin (OVA) is a high-quality protein for humans. Modifying microorganisms to produce proteins offers a solution to potential food protein shortages. In this study, OVA was expressed in Saccharomyces cerevisiae. Initially, screening signal peptides led to extracellular OVA reaching 3.4 mg/L using the INU1 signal peptide. Coexpressing Kar2 and PDI increased OVA production to 5.1 mg/L. Optimizing the expression levels of regulators OPI1, INO2, and INO4 expanded the endoplasmic reticulum membrane, raising yield to 5.5 mg/L. Combining both strategies increased OVA production to 6.2 mg/L, 82% higher than control. This strategy also enhanced secretion of other proteins. Finally, fed-batch fermentation in a 3-L bioreactor significantly boosted OVA production to 116.3 mg/L. This study provides insights for the heterologous synthesis of other high-quality proteins for future food applications.

Review of recent applications and modifications of aqueous two-phase system for the separation of biomolecules

Biomolecules, specifically proteins, polysaccharides, and secondary metabolites are potential lead compounds due to their remarkable pharmacological properties. However, the complex molecular structure of the biomolecules makes their separation processes of great challenges. The conventional downstream processes require multistep protocols that are less efficient, high solvent consumption, expensive, time-consuming, and laborious. Hence, aqueous two-phase system (ATPS) is a reliable technique for the extraction and purification of biomolecules from a complex mixture. ATPS is an environmentally friendly, simple, cost effective, and easily scalable process. It requires a short processing time to separate biomolecules of industrial values simultaneously in a single process. Modifications have also been performed by introducing deep eutectic solvents, ionic liquids, carbohydrates, amino acids or copolymers to enhance the process efficiency with an increased yield, purity and bioactivity of recovered biomolecules. This review attempts to review the recent developed ATPSs and their efficiency to extract, isolate, and purify biomolecules such as proteins, polysaccharides, secondary metabolites and other biological substances. The review provides insights into the feasibility and reliability of ATPS for biomolecule recovery.

Biodegradable gelatin/pectin films containing cellulose nanofibers and biguanide polymers: Characterization and application in sweet cherry packaging

To expand the utilization of gelatin and pectin derived from agricultural by-products, the composite films composed of gelatin, citrus pectin, cellulose nanofibers (CNF), and polyhexamethylene biguanide hydrochloride (PHMB) were prepared through the solvent casting method. Fourier infrared spectroscopy analysis verified the successful integration of CNF and PHMB into the gelatin-pectin matrix. The incorporation of CNF as a reinforcing agent substantially enhanced the barrier capabilities of the composite film. Moreover, the addition of PHMB, functioning as an antimicrobial agent, not only granted the film with antibacterial properties but also improved its physical characteristics and biodegradability. A water contact angle experiment revealed the film presented a certain degree of hydrophobicity. The optimal performances were attained with a composition in which CNF and PHMB constituted 8 % and 3 %, respectively, of the total weight of gelatin and pectin. As a packaging film, the composite film demonstrated its effectiveness by reducing the decay index and weight loss rate of sweet cherries during a 12-day storage period. In the soil degradation test, the composite film exhibited notable structural degradation by the 16th day. Consequently, the composite film will be used as an innovative and biodegradable packaging material to provide a sustainable solution for food packaging industries.

Allergenicity, assembly and applications of ovalbumin in egg white: a review

Ovalbumin (OVA), the most abundant protein in egg whites, has been widely used in various industries. Currently, the structure of OVA has been clearly established, and the extraction of high-purified OVA has become feasible. However, the allergenicity of OVA is still a serious problem because it can cause severe allergic reactions and may even be life-threatening. The structure and allergenicity of the OVA can be altered by many processing methods. In this article, a detailed description on the structure and a comprehensive overview on the extraction protocols and the allergenicity of OVA was documented. Additionally, the information on assembly and potential applications of OVA was summarized and discussed in detail. Physical treatment, chemical modification, and microbial processing can be applied to alter the IgE-binding capacity of OVA by changing its structure and linear/sequential epitopes. Furthermore, research indicated that OVA could assemble with itself or other biomolecules into various forms (particles, fibers, gels, and nanosheets), which expanded its application in the food field. OVA also shows excellent application prospects, including food preservation, functional food ingredients and nutrient delivery. Therefore, OVA demonstrates significant investigation value as a food grade ingredient.

Cold Water Immersion Pretreatment of Post-Consuming Particleboards for Wood Chips Recovery by the Hydromechanical Process

In this research work, the effect of 20-day immersion of various types of reclaimed particleboards on thickness swelling and water absorption is investigated. This simple procedure has been chosen as the pretreatment to facilitate the chips’ recovery by the hydromechanical (water jet) method. Maximum swelling was achieved after 20-day immersion but the differences between 10 and 20-day immersion were small, indicating that the time of 10-day immersion can be chosen as the pretreatment time. It was found that the bond between wood chips’ particles was not completely failed since the permanent swelling after immersion and drying was lower than the maximum swelling. Hence, the proposed method needs to be improved by increasing the cross-section areas of particleboard samples after their breaking in order to create irregular pieces and facilitate the water action against the bond of wood particles.

Physicochemical, Mechanical, and Structural Properties of Bio-Active Films Based on Biological-Chemical Chitosan, a Novel Ramon (Brosimum alicastrum) Starch, and Quercetin

The properties of biological-chemical chitosan (BCh) films from marine-industrial waste and a non-conventional Ramon starch (RS) (Brosimum alicastrum) were investigated. Blended films of BCh/RS were prepared to a volume ratio of 4:1 and 1:4, named (BChRS-80+q, biological-chemical chitosan 80% v/v and Ramon starch, BChRS-20+q, biological-chemical chitosan 20% v/v and Ramon starch, both with quercetin), Films from commercial chitosan (CCh) and corn starch (CS), alone or blended (CChCS-80+q, commercial chitosan 80% v/v and corn starch, CChCS-20+q commercial chitosan 20% v/v and corn starch, both with quercetin) were also prepared for comparison purposes. Films were investigated for their physicochemical characteristics such as thickness, moisture, swelling, water-vapor permeability, and water solubility. In addition, their mechanical and structural properties were studied using Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric analysis (TGA) and Scanning Electron Microscopy (SEM) techniques. Antioxidant activity was evaluated as radical scavenging, and antimicrobial effect was also determined. The BCh and RS films presented similar tensile strength values compared with commercial biopolymers. Only films with chitosan presented antioxidant and antimicrobial activity. The FTIR spectra confirmed the interactions between functional groups of the biopolymers. Although, BChRS-80+q and BChRS-20+q films exhibited poor mechanical performance compared to their commercial counterparts, they showed good thermal stability, and improved antioxidant and antimicrobial activity in the presence of quercetin. BChRS-80+q and BChRS-20+q films have promising applications due to their biological activity and mechanical properties, based on a novel material that has been underutilized (Ramon starch) that does not compete with materials for human feeding and may be used as a coating for food products.

Latest Advances in Protein-Recovery Technologies from Agricultural Waste

In recent years, downstream bioprocessing industries are venturing into less tedious, simple, and high-efficiency separation by implementing advanced purification and extraction methods. This review discusses the separation of proteins, with the main focus on amylase as an enzyme from agricultural waste using conventional and advanced techniques of extraction and purification via a liquid biphasic system (LBS). In comparison to other methods, such as membrane extraction, precipitation, ultrasonication, and chromatography, the LBS stands out as an efficient, cost-effective, and adaptable developing method for protein recovery. The two-phase separation method can be water-soluble polymers, or polymer and salt, or alcohol and salt, which is a simpler and lower-cost method that can be used at a larger purification scale. The comparison of different approaches in LBS for amylase purification from agricultural waste is also included. Current technology has evolved from a simple LBS into microwave-assisted LBS, liquid biphasic flotation (LBF), thermoseparation (TMP), three-phase partitioning (TPP), ultrasound-assisted LBS, and electrically assisted LBS. pH, time, temperature, and concentration are some of the significant research parameters considered in the review of advanced techniques.

Aqueous Two-Phase System–Ion Chromatography for Determination of Thiocyanate in Raw Milk

Thiocyanate could effectively inhibit bacteria in milk and extend the shelf life of milk. However, excessive addition will lead to health risks. Therefore, the determination of thiocyanate in raw milk has received a lot of attention, but the determination could be interfered with by other components in raw milk and the pre-treatment of raw milk is complex. In this study, a new pretreatment method combined with ion chromatography (IC) for rapid and sensitive determination of thiocyanate is proposed. An acetonitrile/(NH4)2SO4 aqueous two-phase system (ATPS) was developed for the separation and enrichment of thiocyanate in raw milk. Response surface methodology was performed to optimize the extraction conditions and an efficient pretreatment were obtained using ATPS composed of 42% acetonitrile (w/w) and 16% (NH4)2SO4 (w/w), with the pH 4.7, and the recovery of thiocyanate reached 107.24 ± 0.5%, and the enrichment ratio was 10.74 ± 0.03. IC was used to establish a thiocyanate enrichment method. The linear range was from 0.05 to 15 mg/L and R2 = 0.998, the limit of detection (LOD) was 0.2 μg/L, the limit of quantification (LQD) was 0.6 μg/L. Hence, it is feasible to combine ATPS with IC for the enrichment and determination of thiocyanate in raw milk.

Combination of aqueous two-phase flotation and inverse transition cycling: Strategies for separation and purification of recombinant β-glucosidase from cell lysis solution

This work was developed to solve the problems of the restriction of non-specific adsorption and time-dependent denaturation in the purification of recombinant proteins by multistage chromatographic procedures. A novel purification method (ATPF-ITC) which combining aqueous two-phase flotation (ATPF) with inverse transition cycling (ITC) was established and used to efficiently purify recombinant β-glucosidase (GLEGB) from cell lysis solution. First, GLEGB would preferentially adsorb on the nitrogen bubble interface relied on the hydrophobic property of the graphene-binding (GB) tag and enter into the top phase of ATPF. Second, GLEGB was achieved further purification by one-round ITC method based on the thermosensitive of the elastin-like polypeptide (ELP) tag. Consequently, the enzymatic activity recovery of GLEGB was 124.92% ± 0.83%, and the purification factor reached 24.26 ± 0.22. The purification results remained stable after six polymer cycles, and the process of ATPF-ITC had no negative effect on the structure of recombinant protein.

Eco-Friendly Rice Straw Paper Coated with Longan (Dimocarpus longan) Peel Extract as Bio-Based and Antibacterial Packaging

This study aimed to develop active paper from rice straw fibers with its function as antibacterial activity obtained from longan (Dimocarpus longan) peels. The morphology and mechanical properties of fibers of rice straw were examined as quality parameters for paper production. Rice straw paper (RSP) with basis weight ca 106.42 g/m², 0.34 mm thickness, 34.15% brightness, and 32.26 N·m/g tensile index was successfully prepared from fibers and pulps without chemical bleaching process. Bioactive compounds of longan peels were extracted using maceration technique with a mixture of ethanol-water, and subsequently coated onto RSP at concentration of 10%, 15% and 20% (w/v). Fourier transform infrared (FTIR) spectroscopic analysis demonstrated the functional groups of phytochemicals in the peel extract. The results of physical properties showed that the coated RSP had similar thickness and tensile index, but had lower brightness compared to control papers. Scanning electron microscopy (SEM) confirmed the significantly different of surface and cross-section structures between coated and uncoated RSP. The coated RSP had relatively greater barrier properties to prevent water absorption. In addition, the RSP coated with longan peel extracts showed significant antibacterial activity against foodborne bacteria, Staphylococcus aureus and Bacillus cereus. This study reveals the benefits of natural byproducts as potential materials for active packaging prepared by environmentally friendly processes.

Extraction and purification of Aspergillus tamarii β-fructofuranosidase with transfructosylating activity using aqueous biphasic systems (PEG/phosphate) and magnetic field

β-fructofuranosidases (FFases) are enzymes involved in sucrose hydrolysis and fructo-oligosaccharides' production which are of great interest for the food industry. FFase from Aspergillus tamarii URM4634 was extracted using PEG/Phosphate Aqueous Biphasic Systems (ABS), and the impact of magnetic field on the extraction behavior was evaluated. A 2⁴-full experimental design was employed to study the influence of molar mass of PEG, concentrations of PEG and phosphate and pH on the selected response variables, i.e., partition coefficient (K), purification factor (PF), activity yield (Y) and selectivity (S). The influence of magnetic field during partition and NaCl concentration on the same responses was also studied. The best results of FFase extraction without magnetic field (K = 0.50, PF = 4.05, Y = 72.66% and S = 0.06) were observed at pH 8.0 using 12.5% (w/w) PEG 400 and 25% (w/w) NaH₂PO₄/K₂HPO₄. Application of the magnetic field allowed improving the performance, with the best results being obtained at the longest distance between magnets (lowest magnetic field) and absence of NaCl (K = 0.93, PF = 4.22, Y = 83.79% and S = 0.09). The outcomes obtained demonstrate that ABS combination with low intensity magnetic field can be used as an efficient FFase pre-purification method.

Direct separation and purification of α-lactalbumin from cow milk whey by aqueous two-phase flotation of thermo-sensitive polymer/phosphate

BACKGROUND

α-lactalbumin (α-La) is of great interest to the industry as a result of its excellent functional properties and nutritional value. Aqueous two-phase flotation (ATPF) of thermo-sensitive polymer poly (ethylene glycol-ran-propylene glycol) monobutyl ether (UCON) and KH₂ PO₄ was applied to directly separate and purify α-La from milk whey, which was purposed to simplify the production process and reduced cost of production.

RESULTS

The effect of ATPF composition and operating parameters on the flotation efficiency (E) and purity of α-La were investigated. The optimal conditions included 2 min of premixing time, 30 mL min^-1 flow velocity and 20 min of flotation time, whereas the composition conditions comprised 35.0 mL 0.18 g mL^-1 phosphate solution (containing 10% (cow milk whey/salt solution, v/v) cow milk whey, 50 ppm defoamer and 2 g NaCl) and 5.0 mL of 40% (w/w) UCON solution. Under the optimal conditions, E of α-La was 95.67 ± 1.04% and purity of α-La was 98.78 ± 1.19%. UCON was recovered by a thermally-induced phase separation and reused in next ATPF process without reducing E of α-La. Purified α-La was characterized by several key technologies. The results indicated that α-La in cow milk whey could be directly separated and purified by the ATPF and the purity was satisfactory. Moreover, it was suggested there was no obvious structure difference between the α-La separated by ATPF and the α-La standard.

CONCLUSION

The present study enabled the recycling of UCON, providing an effective, economically viable and environmentally friendly approach for the separation and purification of protein. © 2021 Society of Chemical Industry.

Development of Antioxidant and Stable Conjugated Linoleic Acid Pickering Emulsion with Protein Nanofibers by Microwave-Assisted Self-Assembly

Whey protein isolate nanofibrils (WPNFs) can be used as a novel stabilizer in the Pickering emulsion system to improve the water solubility, stability and bioavailability of lipophilic bioactive ingredients. In this study, conjugated linoleic acid (CLA) and WPNFs were used to prepare a stable Pickering emulsion. We used a transmission electron microscope, low-temperature scanning electron micrographs and other methods to evaluate the micromorphology, surface hydrophobicity and structural units of the obtained WPNFs. Compared with whey protein isolate/CLA Pickering emulsion, the WPNFs/CLA Pickering emulsion has greater ability to remove 2,2-Diphenyl-1-picrylhydrazyl and 2,2′-amino-di(2-ethyl-benzothiazoline sulphonic acid-6) ammonium salt free radicals. Furthermore, the WPNFs/CLA Pickering emulsion has a more stable effect in terms of droplet size and zeta potential over a wider range of ionic strength and temperature conditions. These findings indicate that Pickering emulsion stabilized by WPNFs is more suitable as a carrier of CLA, as it increases the solubility of CLA and has better active applications in biology and food.

Extraction and Characterization of Hemicelluloses from a Softwood Acid Sulfite Pulp

Hemicelluloses were extracted from a softwood acid sulfite pulp in a three-step procedure. Further delignification step resulted in a holocellulose pulp containing only 1.7 wt.% of the lignin left. Cold caustic extraction (CCE) with 18 wt.% NaOH at 60 °C for 1 h was performed to solubilize hemicelluloses of the holocellulose. An unbleached cellulose pulp was then obtained 97% pure, which indicates that 89% of the hemicelluloses were removed. After purification, extraction yields between 1.1 wt.% and 9.5 wt.% were obtained from the delignified pulp and the hemicelluloses’ chemical compositions and structures were investigated by ¹H, ¹³C nuclear magnetic resonance spectroscopy (NMR) and two-dimensional NMR by correlation spectroscopy (2D-COSY) and proton-detected heteronuclear single-quantum correlation (2D-HSQC), high-performance anion-exchange chromatography coupled with a pulsed amperometry detector (HPAEC-PAD), size-exclusion chromatography coupled with a refractive index detector (SEC-RI) and thermogravimetric analyses (TGA). Hemicelluloses were obtained with a purity of 96%, with short cellulosic chains as the only residue. Sulfite pulping modified the hemicelluloses’ structure, and it was found that two types of hemicelluloses were isolated, glucomannans, predominant at 67%, and methylglucuronoxylans. Finally, alkali-soluble hemicelluloses displayed relatively narrow size distributions and low molar masses, M_w varying between 18,900 and 30,000 g/mol after acid sulfite pulping.

Temperature Effect of Water Coagulation Bath on Chitin Fiber Prepared through Wet-Spinning Process

Chitin was chemically extracted from crab shell waste and dissolved in N,N-dimethyl acetamine/5% lithium chloride (DMAc/5% LiCl) at room temperature to obtain 1% and 2% concentrations of chitin solution. Chitin fibers were prepared by phase inversion at different temperatures of water coagulation bath at 5, 20, and 60 °C. The deconvolution of FTIR spectra indicated that the area portion of the intermolecular hydrogen bonding NH…OC increased at 60 °C due to the higher density of the chitin segment in the fiber. As a result, scanning electron microscope (SEM) measurement suggests that a denser structure of the chitin fiber was observed when the temperature of the coagulation bath increased. In addition, the resultant chitin fibers generated better mechanical properties relative to the amount of chitin concentration and temperature. At 2% of chitin solution, the tensile strength significantly increased from 80 to 182 MPa for the fiber obtained at temperatures of 5 and 60 °C of the water coagulation bath, respectively. Meanwhile, the water content in the fiber significantly decreased from 1101% to 335%. This green synthesis route has high potential for the fabrication of the fiber as future material of interest for biomedical application.

Citrus Pomace Biomass as a Source of Pectin and Lignocellulose Fibers: From Waste to Upgraded Biocomposites for Mulching Applications

Citrus pomace derived from the industrial processing of juice and essential oils mostly consists of pectin, cellulose, hemicellulose, and simple sugars. In this work, citrus pomace waste from an agricultural company in South Italy was used as source of pectin. The extraction conditions of the polysaccharide were optimized using a suitable combination of time and a concentration of a mild organic solvent, such as acetic acid; thus recovering high Mw pectin and bioactive molecules (flavonoids and polyphenols). The pectin was structurally (GPC, FTIR), morphologically (SEM), thermally (TGA/DTG), and mechanically characterized, while bioactive molecules were separated and the total phenolic content (TPC) and total flavonoids content (TFC) were evaluated. With the aim to develop novel biocomposite-based materials, the pectin extracted from citrus waste was reinforced with different amounts of lignocellulose fractions also recovered from citrus waste after polysaccharide extraction, according to a "zero waste" circular economy approach. The prepared biocomposites were morphologically and mechanically characterized to be used as biodegradable mulching systems for crop protection. Thus, the citrus waste biomass was recovered, fractionated into its main raw materials, and these were recombined to develop novel upgraded biocomposites for mulching applications, by means of a cost-effective and eco-sustainable approach.

Extractive fermentation for process integration of protease production by Aspergillus tamarii Kita UCP1279 and purification by PEG-Citrate Aqueous Two-Phase System

The present study evaluated the influence of the variables polyethylene glycol (PEG) molar mass, pH, PEG concentration and sodium citrate concentration in the integrated production of the protease from Aspergillus tamarii Kita UCP1279 by extractive fermentation, obtaining as a response the partition coefficient (K), activity yield (Y) and concentration factor (CF). The enzyme preferably partitioned to the top phase and obtained in the system formed by variables M_PEG = 400 g mol^-1, C_PEG = 20% (w w^-1), and C_CIT = 20% (w w^-1) and pH 6, in this condition were obtained CF = 1.90 and Y = 79.90%. The protease showed stability at a temperature of 60 °C for 180 min, with optimum temperature 40 °C and pH 8.0. For the ions and inhibitors effects, the protease activity increased when exposed to Fe²⁺, Ca²⁺ and Zn^{2 +} and inhibited by EDTA, being classified as metalloprotease. The kinetic parameters K_m (35.63 mg mL^-1) and V_max (1.205 mg mL^-1min^-1) were also estimated. Thus, the protease showed desirable characteristics that enable future industrial applications, especially, for beer industry.

pH-Stat Titration: A Rapid Assay for Enzymatic Degradability of Bio-Based Polymers

Bio-based polymers have been suggested as one possible opportunity to counteract the progressive accumulation of microplastics in the environments. The gradual substitution of conventional plastics by bio-based polymers bears a variety of novel materials. The application of bioplastics is determined by their stability and bio-degradability, respectively. With the increasing implementation of bio-based plastics, there is also a demand for rapid and non-elaborate methods to determine their bio-degradability. Here, we propose an improved pH Stat titration assay optimized for bio-based polymers under environmental conditions and controlled temperature. Exemplarily, suspensions of poly(lactic acid) (PLA) and poly(butylene succinate) (PBS) microparticles were incubated with proteolytic and lipolytic enzymes. The rate of hydrolysis, as determined by counter-titration with a diluted base (NaOH), was recorded for two hours. PLA was hydrolyzed by proteolytic enzymes but not by lipase. PBS, in contrast, showed higher hydrolysis rates with lipase than with proteases. The thermal profile of PLA hydrolysis by protease showed an exponential increase from 4 to 30 °C with a temperature quotient Q₁₀ of 5.6. The activation energy was 110 kJ·mol^-1. pH-Stat titration proved to be a rapid, sensitive, and reliable procedure supplementing established methods of determining the bio-degradability of polymers under environmental conditions.

Development and Characterization of Weft-Knitted Fabrics of Naturally Occurring Polymer Fibers for Sustainable and Functional Textiles

This study focuses on the potential uses in textiles of fibers of soy protein (SP) and chitin, which are naturally occurring polymers that can be obtained from agricultural and food processing by-products and wastes. The as-received natural fibers were first subjected to a three-step manufacturing process to develop yarns that were, thereafter, converted into fabrics by weft knitting. Different characterizations in terms of physical properties and comfort parameters were carried out on the natural fibers and compared to waste derived fibers of coir and also conventional cotton and cotton-based fibers, which are widely used in the textile industry. The evaluation of the geometry and mechanical properties revealed that both SP and chitin fibers showed similar fineness and tenacity values than cotton, whereas coir did not achieve the expected properties to develop fabrics. In relation to the moisture content, it was found that the SP fibers outperformed the other natural fibers, which could successfully avoid variations in the mechanical performance of their fabrics as well as impair the growth of microorganisms. In addition, the antimicrobial activity of the natural fibers was assessed against different bacteria and fungi that are typically found on the skin. The obtained results indicated that the fibers of chitin and also SP, being the latter functionalized with biocides during the fiber-formation process, showed a high antimicrobial activity. In particular, reductions of up to 100% and 60% were attained for the bacteria and fungi strains, respectively. Finally, textile comfort was evaluated on the weft-knitted fabrics of the chitin and SP fibers by means of thermal and tactile tests. The comfort analysis indicated that the thermal resistance of both fabrics was similar to that of cotton, whereas their air permeability was higher, particularly for chitin due to its higher fineness, which makes these natural fibers very promising for summer clothes. Both the SP and chitin fabrics also presented relatively similar values of fullness and softness than the pure cotton fabric in terms of body feeling and richness. However, the cotton/polyester fabric was the only one that achieved a good range for uses in winter-autumn cloths. Therefore, the results of this work demonstrate that non-conventional chitin and SP fibers can be considered as potential candidates to replace cotton fibers in fabrics for the textile industry due to their high comfort and improved sustainability. Furthermore, these natural fibers can also serve to develop novel functional textiles with antimicrobial properties.

Eco-Friendly Fiberboard Panels from Recycled Fibers Bonded with Calcium Lignosulfonate

The potential of using residual softwood fibers from the pulp and paper industry for producing eco-friendly, zero-formaldehyde fiberboard panels, bonded with calcium lignosulfonate (CLS) as a lignin-based, formaldehyde free adhesive, was investigated in this work. Fiberboard panels were manufactured in the laboratory by applying CLS addition content ranging from 8% to 14% (on the dry fibers). The physical and mechanical properties of the developed composites, i.e., water absorption (WA), thickness swelling (TS), modulus of elasticity (MOE), bending strength (MOR), as well as the free formaldehyde emission, were evaluated according to the European norms. In general, only the composites, developed with 14% CLS content, exhibited MOE and MOR values, comparable with the standard requirements for medium-density fiberboards (MDF) for use in dry conditions. All laboratory-produced composites demonstrated significantly deteriorated moisture-related properties, i.e., WA (24 h) and TS (24 h), which is a major drawback. Noticeably, the fiberboards produced had a close-to-zero formaldehyde content, reaching the super E0 class (≤1.5 mg/100 g), with values, ranging from 0.8 mg/100 g to 1.1 mg/100 g, i.e., equivalent to formaldehyde emission of natural wood. The amount of CLS adhesive had no significant effect on formaldehyde content.

α-Cellulose Fibers of Paper-Waste Origin Surface-Modified with Fe3O4 and Thiolated-Chitosan for Efficacious Immobilization of Laccase

The utilization of waste-paper-biomass for extraction of important α-cellulose biopolymer, and modification of extracted α-cellulose for application in enzyme immobilization can be extremely vital for green circular bio-economy. Thus, in this study, α-cellulose fibers were super-magnetized (Fe3O4), grafted with chitosan (CTNs), and thiol (-SH) modified for laccase immobilization. The developed material was characterized by high-resolution transmission electron microscopy (HR-TEM), HR-TEM energy dispersive X-ray spectroscopy (HR-TEM-EDS), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) analyses. Laccase immobilized on α-Cellulose-Fe3O4-CTNs (α-Cellulose-Fe3O4-CTNs-Laccase) gave significant activity recovery (99.16%) and laccase loading potential (169.36 mg/g). The α-Cellulose-Fe3O4-CTNs-Laccase displayed excellent stabilities for temperature, pH, and storage time. The α-Cellulose-Fe3O4-CTNs-Laccase applied in repeated cycles shown remarkable consistency of activity retention for 10 cycles. After the 10th cycle, α-Cellulose-Fe3O4-CTNs possessed 80.65% relative activity. Furthermore, α-Cellulose-Fe3O4-CTNs-Laccase shown excellent degradation of pharmaceutical contaminant sulfamethoxazole (SMX). The SMX degradation by α-Cellulose-Fe3O4-CTNs-Laccase was found optimum at incubation time (20 h), pH (3), temperatures (30 °C), and shaking conditions (200 rpm). Finally, α-Cellulose-Fe3O4-CTNs-Laccase gave repeated degradation of SMX. Thus, this study presents a novel, waste-derived, highly capable, and super-magnetic nanocomposite for enzyme immobilization applications.

Effective separation of prolyl endopeptidase from Aspergillus Niger by aqueous two phase system and its characterization and application

Aspergillus niger prolyl endopeptidase (An-PEP) has become a research focus because of its advantages in specifically cleaving the C-terminal peptide bond of proline residues, especially it was an industrial food-grade acidic PEP. Aqueous two-phase system (ATPS) was first applied for separating An-PEP from fermentation broth. Via response surface method (RSM) experiment, an effectively separation of An-PEP was achieved by ATPS containing27% (w/w) ethanol and 14.5% (w/w) (NH₄)₂SO₄ at pH 6.0 with the recovery of 90.29 ± 0.23% and purification coefficient of 15.35 ± 0.30. The purified An-PEP was characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), fourier transform infrared (FTIR) and fluorescence spectrometry. The optimum temperature and pH of An-PEP were 40 °C and 4.5-5.0, respectively. An-PEP was activated and stabilized by Ca²⁺ but inhibited by Fe³⁺. The enzymatic application of purified An-PEP was evaluated by hydrolyzing egg white protein (EWP) to prepare bioactive peptides. The obtained hydrolysates had good scavenging ability of OH and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) free radicals, angiotensin converting enzyme (ACE) inhibitory activity and anti-gout activity. This research realized a low-cost, high-efficiency and simple separation technology of An-PEP and provided a broader idea for the preparation of bioactive peptides and the application of An-PEP.

Biodegradable Antimicrobial Food Packaging: Trends and Perspectives

This review presents a perspective on the research trends and solutions from recent years in the domain of antimicrobial packaging materials. The antibacterial, antifungal, and antioxidant activities can be induced by the main polymer used for packaging or by addition of various components from natural agents (bacteriocins, essential oils, natural extracts, etc.) to synthetic agents, both organic and inorganic (Ag, ZnO, TiO2 nanoparticles, synthetic antibiotics etc.). The general trend for the packaging evolution is from the inert and polluting plastic waste to the antimicrobial active, biodegradable or edible, biopolymer film packaging. Like in many domains this transition is an evolution rather than a revolution, and changes are coming in small steps. Changing the public perception and industry focus on the antimicrobial packaging solutions will enhance the shelf life and provide healthier food, thus diminishing the waste of agricultural resources, but will also reduce the plastic pollution generated by humankind as most new polymers used for packaging are from renewable sources and are biodegradable. Polysaccharides (like chitosan, cellulose and derivatives, starch etc.), lipids and proteins (from vegetal or animal origin), and some other specific biopolymers (like polylactic acid or polyvinyl alcohol) have been used as single component or in blends to obtain antimicrobial packaging materials. Where the package's antimicrobial and antioxidant activities need a larger spectrum or a boost, certain active substances are embedded, encapsulated, coated, grafted into or onto the polymeric film. This review tries to cover the latest updates on the antimicrobial packaging, edible or not, using as support traditional and new polymers, with emphasis on natural compounds.

Production and partial purification by PEG/citrate ATPS of a β-galactosidase from the new promising isolate Cladosporium tenuissimum URM 7803

β-Galactosidase production, partial purification and characterization by a new fungal were investigated. Partial purification was performed by aqueous two-phase system (ATPS) using polyethylene glycol (PEG) molar mass, PEG concentration, citrate concentration and pH as the independent variables. Purification factor (PF), partition coefficient (K) and yield (Y) were the responses. After identification by rDNA sequencing and classification as Cladosporium tenuissimum URM 7803, this isolate achieved a maximum cell concentration and β-galactosidase activity of 0.48 g/L and 462.1 U/mL, respectively. β-Galactosidase partitioned preferentially for bottom salt-rich phase likely due to hydrophobicity and volume exclusion effect caused in the top phase by the high PEG concentration and molar mass. The highest value of PF (12.94) was obtained using 24% (w/w) PEG 8000 g/mol and 15% (w/w) citrate, while that of Y (79.76%) using 20% (w/w) PEG 400 g/mol and 25% (w/w) citrate, both at pH 6. The enzyme exhibited optimum temperature in crude and ATPS extracts in the ranges 35-50 °C and 40-55 °C, respectively, and optimum pH in the range 3.0-4.5, with a fall of enzyme activity under alkaline conditions. Some metal ions and detergents inhibited, while others stimulated enzyme activity. Finally, C. tenuissimum URM 7803 β-galactosidase showed a profile suitable for prebiotics production.

Targeting Delivery System for Lactobacillus Plantarum Based on Functionalized Electrospun Nanofibers

With the increased interest in information on gut microbes, people are realizing the benefits of probiotics to health, and new technologies to improve the viability of probiotics are still explored. However, most probiotics have poor resistance to adverse environments. In order to improve the viability of lactic acid bacteria, polylactic acid (PLA) nanofibers were prepared by coaxial electrospinning. The electrospinning voltage was 16 kV, and the distance between spinneret and collector was 15 cm. The feed rates of the shell and core solutions were 1.0 and 0.25 mL/h, respectively. The lactic acid bacteria were encapsulated in the coaxial electrospun nanofibers with PLA and fructooligosaccharides (FOS) as the shell materials. Scanning electron microscopy, transmission electron microscopy, and laser scanning confocal microscopy showed that lactic acid bacteria were encapsulated in the coaxial electrospun nanofibers successfully. The water contact angle test indicated that coaxial electrospun nanofiber films had good hydrophobicity. An in vitro simulated digestion test exhibited that the survival rate of lactic acid bacteria encapsulated in coaxial electrospun nanofiber films was more than 72%. This study proved that the viability of probiotics can be improved through encapsulation within coaxial electrospun PLA nanofibers and provided a novel approach for encapsulating bioactive substances.

Agricultural and Food Waste: Analysis, Characterization and Extraction of Bioactive Compounds and Their Possible Utilization

The characterization and reutilization of agricultural and food waste is an important strategy to ensure the sustainable development of the agricultural and food industries. As a result, the environmental impact of these industries can be reduced, thus contributing to the fight against environmental problems, mainly to those related to a potential mitigation of climatic change. This Special Issue includes five papers that reported important findings from research activities related to the reutilization of by-products from food processing industries, which help to increase the knowledge in this field.

Fabrication and Characterization of a Microemulsion Stabilized by Integrated Phosvitin and Gallic Acid

The purpose of this work was to conjugate phosvitin (Pv) with gallic acid (GA) to explore a new emulsifier that had both good emulsifying properties and antioxidant activity. The Pv-GA complex was prepared at a GA concentration of 1.5 mg/mL with pH 9.0. The Pv-GA complex obtained was identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and characterized with infrared, ultraviolet, and fluorescence spectra. The emulsifying activity and stability of the Pv-GA complex were slightly improved, and antioxidant activities was significantly enhanced. Furthermore, the Pv-GA complex was used to load conjugated linoleic acid (CLA) for microemulsion preparation. Results showed that the Pv-GA complex could increase the viscosity and lipid antioxidant capacity of Pv-GA/CLA microemulsion. The Pv-GA/CLA microemulsion had remarkable emulsifying activity, emulsifying stability, pH, and thermal stability and poor salt stability.

Preparation and Characterization of Coating Based on Protein Nanofibers and Polyphenol and Application for Salted Duck Egg Yolks

Salted duck egg yolk (SDEY) is one of the traditional pickled egg products in Asian countries, which suffers from the weight loss and deterioration of texture characteristics during storage. To better maintain the texture of SDEY, an edible coating based on whey protein isolate nanofibers (WPNFs) with glycerol (Gly) as a plasticizer and incorporating carvacrol (CA) as an antimicrobial agent was developed. Whey protein isolate (WPI, 5%) was used to self-assemble into WPNFs at 80 °C for 10 h. The particle size, zeta-potential and microstructure of WPNFs–CA emulsion were investigated to evaluate the distribution. Results proved that WPNFs–CA emulsion had smaller particle size and better distribution than WPI–CA emulsion. WPNFs–CA/Gly edible coating was then prepared based on WPNFs–CA emulsion. The WPNFs–CA/Gly edible coating exhibited higher antibacterial activity while the WPNFs–CA/Gly film had smooth and continuous surfaces and better transmittance compared with other samples. Furthermore, weight losses and textural properties changes of SDEYs with WPNFs–CA/Gly coating were evaluated. Results proved that salted duck egg yolks with WPNFs–CA/Gly coating exhibited lower weight losses. Textural properties were significantly improved by the WPNFs–CA/Gly coating on SDEYs than those uncoated samples. It was noted that the egg yolks coated with the WPNFs–CA/Gly coating had the lowest hardness increase rate (18.22%). Hence, WPNF-based coatings may have a good development prospect in the food industry.

Study on the Preparation and Conjugation Mechanism of the Phosvitin-Gallic Acid Complex with an Antioxidant and Emulsifying Capability

To develop a novel emulsifier with an antioxidant capacity, a phosvitin-gallic acid (Pv–GA) complex was prepared via a free-radical method. This emulsifier characterizes some key technologies. Changes in the molecular weight of the Pv–GA complex were analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS–PAGE) and the matrix-assisted laser desorption/ionization time of light mass spectrometry (MALDI-TOF-MS). Fourier transform infrared spectroscopy (FTIR) indicated that C=O, C–N and N–H groups were also likely to be involved in the formation of the complex. A redshift was obtained in the fluorescence spectrogram, thereby proving that the covalent combination of Pv and GA was a free radical-forming complex. The results indicated that Pv and GA were successfully conjugated. Meanwhile, the secondary structure of Pv showed significant changes after conjugation with GA. The antioxidant activity and emulsifying properties of the Pv–GA complex were studied. The antioxidant activity of the Pv–GA complex proved to be much higher than that of the Pv, via assays of the scavenging activities of 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radicals and because of their ability to reduce power. The emulsification activity of the Pv–GA complex was also slightly higher than that of Pv. To function with the most demanding antioxidant and emulsification activities, the optimum conjugation condition was Pv (5 mg/mL) conjugated 1.5 mg/mL GA. Furthermore, the mechanism of Pv–GA conjugation was studied. This study indicated that GA could quench the inner fluorescence of Pv, and this quenching was static. There was a strong interaction between GA and Pv, which was not obviously affected by the temperature. Furthermore, several binding sites were close to 1, indicating that there was an independent class of binding sites on Pv for GA at different temperatures. The conjugation reaction was a spontaneous reaction, and the interaction forces of GA and Pv were hydrogen bonds and van der Waals force.

Ultrasonic Thermal-Assisted Extraction of Phosvitin from Egg Yolk and Evaluation of Its Properties

Phosvitin (Pv) is the principal phosphoprotein in chicken egg yolk and the most highly phosphorylated protein in nature. Pv is a good natural food antioxidant and emulsifier. However, the current extraction methods present disadvantages of complicated operation and are time-consuming. In this paper, Pv was extracted from the egg yolk by ultrasonic thermal-assisted extraction (UTAE). The effects of heating time, ultrasonic power and ultrasonic time on the extraction of Pv were investigated by a single factor. The purity of Pv, ratio of nitrogen to phosphorus (N/P), and activity were used as evaluation indexes. An efficient extraction of Pv was achieved when the sample was heated for 15 min at 80 °C and then processed for 10 min of ultrasonic treatment with an ultrasonic power of 600 W. Under optimal conditions, the purity and activity of Pv were 80% and 98%, respectively, whereas the ratio of N/P was 3.1. The obtained Pv was identified by sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE), Fluorescence analyses, fourier-transform infrared (FT-IR), and liquid chromatography-nanoelectrospray ionization mass spectrometry (Nano LC-ESI-MS/MS) analysis. The results showed there is no significant difference in the properties of Pv obtained by UTAE and Pv standard. The developed extraction approach is a simple, industrial compatible method without the use of any organic solvents.