Effect of calcium sprays on mechanical strength and cell wall fractions of herbaceous peony (Paeonia lactiflora pall.) inflorescence stems

Side chain of confined xylan affects cellulose integrity leading to bending stem with reduced mechanical strength in ornamental plants

The stem support for fresh-cut flowers exerts a profound influence on the display of their blossoms. During vase insertion, bending stems significantly affect the ornamental value, but much remains unclear about the underlying reasons. In this study, six pairs of ornamental plants were screened for the contrast of bending and straight stems. The bending stems have weakened mechanical force and biomass recalcitrance compared with the straight ones. Meanwhile, cells in the bending stems became more loosely packed, along with a decrease in cell wall thickness and cellulose levels. Furthermore, wall properties characterizations show bending stems have decreased lignocellulosic CrI and cellulose DP, and enhanced the branching ratio of hemicellulose which is trapped in the cellulose. Given the distinct cell wall factors in different species, all data are grouped in standardized to eliminate the variations among plant species. The principal composition analysis and correlation analysis of the processed dataset strongly suggest that cellulose association factors determine the stem mechanical force and recalcitrance. Based on our results, we propose a model for how branches of confined hemicellulose interacted with cellulose to modulate stem strength support for the straight or bending phenotype in cut flowers.

Transcriptome and hormone metabolome reveal the mechanism of stem bending in water lily (Nymphaea tetragona) cut-flowers

Water lilies are popular ornamental cut-flowers with significant economic and cultural value. However, stem bending affects the preservation of cut-flowers during their vase life. To gain further insights into the molecular mechanisms of stem bending, transcriptome profiling, hormone measurement, and morphological analysis were performed using the stems of the 'Blue Bird' water lily. Transcriptome analysis revealed that 607 differentially expressed genes (DEGs) were associated with the dorsal and ventral stems of the water lily, of which 247 were up-regulated and 360 were down-regulated. Significant differences in genes associated with plant hormones, calcium ions, glucose metabolism, and photosynthesis pathways genes involved in the dorsal and ventral areas of the curved stem. In particular, DEGs were associated with the hormone synthesis, gravity response, starch granules, Ca2+ ions, and photosynthesis. The results of qRT-PCR were consistent with that of the transcriptome sequence analysis. A total of 12 hormones were detected, of which abscisic acid, indole-3-carboxaldehyde, indole-3-carboxaldehyde and jasmonic acid were significantly differentially expressed in the dorsal and ventral stems, and were significantly higher in the dorsal stem than in the ventral stem. The cell morphology in the dorsal and ventral areas of the curved stem clearly changed during vase life. The direction of starch granule settlement was consistent with the bending direction of the water lily stem, as well as the direction of gravity. In conclusion, stem bending in water lily cut-flowers is regulated by multiple factors and genes. This study provides an important theoretical basis for understanding the complex regulatory mechanism of water lily stem bending.

Pre and postharvest characteristics of Dahlia pinnata var. pinnata, cav. As affected by SiO2 and CaCO3 nanoparticles under two different planting dates

Agriculture faces many challenges because of climate changes. The nutrients present in nano-sized form improve plant productivity, especially when used at the appropriate planting time. Field experiments were conducted as a factorial experiment for evaluating two planting dates (20th September and 20th October), foliar application with nanoparticles (NPs) including silica nanoparticles (SiO₂-NPs) at 1.5 and 3 mM, calcium carbonate nanoparticles (CaCO₃-NPs) at 5 and 10 mM and distilled water (control) on pre- and post-harvest characteristics of Dahlia pinnata var. pinnata Cav. The results indicate that the interactions during the late planting time (20th October) and exogenous applications of SiO₂-NPs at 1.5 mM or CaCO₃-NPs at 10 mM have improved plant growth including plant height, stem diameter, fresh and dry weights of plant, leaf area, inflorescence diameter, inflorescence stalk length, branches number, tuber numbers, inflorescences number on the plant, and the vase life. At the same time, insignificant differences appeared in the interaction during the planting dates and SiO₂ or CaCO₃ -NPs concentrations on inflorescence stalk diameter, total soluble solids, membrane stability index, maximum increase in fresh weight (FW), and Si and Ca contents. In addition, all exogenous applications of NPs at the late planting time promoted the plant growth characteristics like lignin %, cellulose %, inflorescence water content, change in FW, and total water uptake. Moreover, the controls through the two planting dates recorded the maximum change in water uptake and water loss values. In short, it can be recommended to use SiO₂-NPs at 1.5 mM or CaCO₃-NPs at 10 mM as a foliar application at the late planting time (20th October) for obtaining the optimum quantitative and qualitative parameters of D. pinnata.

Proteomic Analysis of the Inflorescence Stem Mechanical Strength Difference in Herbaceous Peonies (Paeonia lactiflora Pall.)

The herbaceous peony (Paeonia lactiflora Pall.) is a traditional rare flower in China, and production of its cut flowers has developed gradually in many places of the world. However, the inflorescence stems of some P. lactiflora cultivars have such low mechanical strength that the cut flower production was severely restricted. To better understand the causes of this problem from a protein expression level, two P. lactiflora cultivars with different inflorescence stem mechanical strengths were analyzed by two-dimensional electrophoresis and MALDI-TOF/MS. More than 1700 clear protein spots were detected, 53 of which varied significantly. Moreover, 23 of the differentially expressed proteins were identified and confirmed and are involved in various biological processes such as metabolism, protein biosynthesis and transport, signal transduction, and defensive response. Especially, cinnamyl alcohol dehydrogenase (CAD) and xyloglucan endotransglucosylase/hydrolase (XTH) were strongly connected to the inflorescence stem mechanical strength in P. lactiflora.

Transcriptome provides potential insights into how calcium affects the formation of stone cell in Pyrus

Background

The content of stone cells in pears has a great influence on taste. Stone cells are formed by the accumulation of lignin. The treatment of exogenous calcium can affect the lignin synthesis, but this Ca-mediated mechanism is still unclear. In this study, the author performed a comparative transcriptomic analysis of callus of pears (Pyrus x bretschneideri) treated with calcium nitrate Ca (NO₃)₂ to investigate the role of calcium in lignin synthesis.

Results

There were 2889 differentially expressed genes (DEGs) detected between the Control and Ca (NO₃)₂ treatment in total. Among these 2889 DEGs, not only a large number of genes related to Ca single were found, but also many genes were enriched in secondary metabolic pathway, especially in lignin synthesis. Most of them were up-regulated during the development of callus after Ca (NO₃)₂ treatment. In order to further explore how calcium nitrate treatment affects lignin synthesis, the author screened genes associated with transduction of calcium signal in DEGs, and finally found CAM, CML, CDPK, CBL and CIPK. Then the author identified the PbCML3 in pears and conducted relevant experiments finding the overexpression of PbCML3 would increase the content of pear stone cells, providing potential insights into how Ca treatment enhances the stone cell in pears.

Conclusions

Our deep analysis reveals the effects of exogenous calcium on calcium signal and lignin biosynthesis pathway. The function of PbCML3 on stone cells formation was verified in pear.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-021-08161-5.

The relationship between fluoride accumulation in tea plant and changes in leaf cell wall structure and composition under different fluoride conditions

Tea plant is capable of hyper-accumulating fluoride (F) in leaves, suggesting drinking tea may cause excessive F intake in our body and threaten the health. This study investigated the changes in the structure, composition, and F content in the leaf cell wall of the tea (Camellia sinensis) under different F conditions to demonstrate the role of cell wall in F enrichment in tea plants. The cell wall was shown as the main part for F accumulation (67%-92%), with most of F distributed in the pectin fraction (56%-71%). With increasing F concentration, a significant increase (p < 0.05) was observed in the F content of cell wall and its components, the level of cell wall metal ions (i.e. Cu, Mg, Zn, Al, Ca, Ba, Mn), as well as the content of total cell wall materials, cellulose, and pectin. Meanwhile, the level of Cu, Mg, Zn, pectin, and cellulose was significantly positively correlated with the F content in the leaf cell wall. F addition was shown to increase the fluorescence intensity of LM19 and 2F4 antibody-labeled low-methylesterified homogalacturonans (HGs), while decrease LM20-labeled high-methylesterified HGs, coupled with an increase in the activity and gene expression of pectin methyl esterases (PMEs) in tea leaves. All these results suggest that F addition can increase pectin content and demethylesterification, leading to increased absorption of metal cations and chelation of F in the cell wall through the action of metal ions.

Transcriptome and weighted correlation network analyses provide insights into inflorescence stem straightness in Paeonia lactiflora

Lack of structural components results in inflorescence stem bending. Differentially expressed genes involved in lignin and hemicellulose biosynthesis are vital; genes involved in cellulose and glycan biosynthesis are also relevant. An erect inflorescence stem is essential for high-quality cut herbaceous peony flowers. To explore the factors underlying inflorescence stem bending, major cell walls contents were measured, and stem structure was observed in two herbaceous peony varieties with contrasting stem straightness traits ('Da Fugui', upright; 'Chui Touhong', bending). In addition, Illumina sequencing was performed and weighted correlation network analysis (WGCNA) was used to analyze the results. The results showed significant differences in lignin, hemicellulose and soluble sugar contents, sclerenchyma and xylem areas and thickening in cell walls in pith at stage S3, when bending begins. In addition, 44,182 significantly differentially expressed genes (DEGs) were found, and these DEGs were mainly enriched in 36 pathways. Among the DEGs, hub genes involved in lignin, cellulose, and xylan biosynthesis and transcription factors that regulated these process were identified by WGCNA. These results suggested that the contents of compounds that provided cell wall rigidity were vital factors affecting inflorescence stem straightness in herbaceous peony. Genes involved in or regulating the biosynthesis of these compounds are thus important; lignin and hemicellulose are of great interest, and cellulose and glycan should not be ignored. This paper lays a foundation for developing new herbaceous peony varieties suitable for cut flowers by molecular-assisted breeding.

Integration of Transcriptome, Proteome, and Metabolome Provides Insights into How Calcium Enhances the Mechanical Strength of Herbaceous Peony Inflorescence Stems

Weak stem mechanical strength severely restrains cut flowers quality and stem weakness can be alleviated by calcium (Ca) treatment, but the mechanisms underlying Ca-mediated enhancement of stem mechanical strength remain largely unknown. In this study, we performed a comparative transcriptomic, proteomic, and metabolomic analysis of herbaceous peony (Paeonia lactiflora Pall.) inflorescence stems treated with nanometer Ca carbonate (Nano-CaCO₃). In total, 2643 differentially expressed genes (DEGs) and 892 differentially expressed proteins (DEPs) were detected between the Control and nano-CaCO₃ treatment. Among the 892 DEPs, 152 were coregulated at both the proteomic and transcriptomic levels, and 24 DEPs related to the secondary cell wall were involved in signal transduction, energy metabolism, carbohydrate metabolism and lignin biosynthesis, most of which were upregulated after nano-CaCO₃ treatment during the development of inflorescence stems. Among these four pathways, numerous differentially expressed metabolites (DEMs) related to lignin biosynthesis were identified. Furthermore, structural observations revealed the thickening of the sclerenchyma cell walls, and the main wall constitutive component lignin accumulated significantly in response to nano-CaCO₃ treatment, thereby indicating that Ca can enhance the mechanical strength of the inflorescence stems by increasing the lignin accumulation. These results provided insights into how Ca treatment enhances the mechanical strength of inflorescence stems in P. lactiflora.

EGTA reduces the inflorescence stem mechanical strength of herbaceous peony by modifying secondary wall biosynthesis

The mechanical strength of inflorescence stems is an important trait in cut flowers. Calcium ions (Ca²⁺) play a pivotal role in maintaining stem strength, but little is known about the underlying molecular mechanisms. In this study, we treated herbaceous peony (Paeonia lactiflora Pall.) with ethyl glycol tetraacetic acid (EGTA), an effective Ca²⁺ chelator, and used morphology indicators, spectroscopic analysis, histochemical staining, electron microscopy, and proteomic techniques to investigate the role of Ca²⁺ in inflorescence stem mechanical strength. The EGTA treatment reduced the mechanical strength of inflorescence stems, triggered the loss of Ca²⁺ from cell walls, and reduced lignin in thickened secondary walls in xylem cells as determined by spectroscopic analysis and histochemical staining. Electron microscopy showed that the EGTA treatment also resulted in significantly fewer xylem cell layers with thickened secondary walls as well as in reducing the thickness of these secondary walls. The proteomic analysis showed 1065 differentially expressed proteins (DEPs) at the full-flowering stage (S4). By overlapping the Kyoto encyclopedia of genes and genomes (KEGG) and gene ontology (GO) analysis results, we identified 43 DEPs involved in signal transduction, transport, energy metabolism, carbohydrate metabolism, and secondary metabolite biosynthesis. Using quantitative real-time polymerase chain reaction (qRT-PCR) analysis, we showed that EGTA treatment inhibited Ca²⁺ sensors and secondary wall biosynthesis-related genes. Our findings revealed that EGTA treatment reduced the inflorescence stem mechanical strength by reducing lignin deposition in xylem cells through altering the expression of genes involved in Ca²⁺ binding and secondary wall biosynthesis.

Relating the mechanics of the primary plant cell wall to morphogenesis

Regulation of the mechanical properties of the cell wall is a key parameter used by plants to control the growth behavior of individual cells and tissues. Modulation of the mechanical properties occurs through the control of the biochemical composition and the degree and nature of interlinking between cell wall polysaccharides. Preferentially oriented cellulose microfibrils restrict cellular expansive growth, but recent evidence suggests that this may not be the trigger for anisotropic growth. Instead, non-uniform softening through the modulation of pectin chemistry may be an initial step that precedes stress-induced stiffening of the wall through cellulose. Here we briefly review the major cell wall polysaccharides and their implication for plant cell wall mechanics that need to be considered in order to study the growth behavior of the primary plant cell wall.