Rigid Schiff Base Complex Supermolecular Aggregates as a High-Performance pH Probe: Study on the Enhancement of the Aggregation-Caused Quenching (ACQ) Effect via the Substitution of Halogen Atoms

The impact of halogen substitution quantities on the fluorescence intensity ratio of lanthanide Schiff base complexes

The signal intensity ratio (SIR) is a crucial factor in advancing probe technology due to its direct impact on sensitivity and precision, particularly in applications such as medical imaging, environmental monitoring, and food safety testing. However, the development of high-SIR probes is challenged by complexities in fabrication, cost, and mechanical stability. In this study, we address these limitations by investigating the role of halogen atom substitutions in modulating the intermolecular binding energy and aggregation behavior of Ce-Salen Schiff base complexes. We synthesized a novel Schiff base pH probe, Ce-3,5-Cl-Salpn (3,5-Cl-Salpn = N, N'-bis (3,5-dichlorosalicylidene)ethylene-1,3-diaminopropane), and introduced its analogues Ce-5-Cl-Salpn (5-Cl-Salpn = N, N'-bis (5-chlorosalicylidene)ethylene-1,3-diaminopropane) and Ce-Salpn (Salpn = N, N'-bis (salicylidene)ethylene-1,3-diaminopropane) for comparative analysis. Through fluorescence measurements, single-crystal analysis, and theoretical calculations, we demonstrate that halogen substitution leads to significant modulation of fluorescence intensity and SIR in the pH range of 6.0 to 7.0. Notably, Ce-3,5-Cl-Salpn exhibited the highest SIR, with a 182.5-fold increase, compared to the non-halogenated variant's 9.2-fold rise. Frontier molecular orbital (FMO) analysis revealed a reduction in the HOMO-LUMO energy gap as halogen substitution increased, resulting in enhanced optical properties and more efficient electronic transitions. Additionally, binding energy calculations confirmed that halogen atoms strengthen intermolecular interactions, thereby improving molecular stability and aggregation-caused quenching effects.

Ratiometric Fluorescence and Chromogenic Probe for Trace Detection of Selected Transition Metals

The design and development of a fluorescence sensor aimed at detecting and quantifying trace amounts of toxic transition metal ions within environmental, biological, and aquatic samples has garnered significant attention from diagnostic and testing laboratories, driven by the imperative to mitigate the health risks associated with these contaminants. In this context, we present the utilization of a heterocyclic symmetrical Schiff Base derivative for the purpose of fluorogenic and chromogenic detection of Co2+, Cu2+ and Hg2+ ions. The characterization of the ligand involved a comprehensive array of techniques, including physical assessments, optical analyses, NMR, FT-IR, and mass spectrometric examinations. The mechanism of ligand-metal complexation was elucidated through the utilization of photophysical parameters and FT-IR spectroscopic analysis, both before and after the interaction between the ligand and the metal salt solution. The pronounced alterations observed in absorption and fluorescence spectra, along with the distinctive chromogenic changes, following treatment with Co2+, Cu2+ and Hg2+, affirm the successful formation of complexes between the ligands and the treated metal ions. Notably, the receptor's complexation response exhibited selectivity towards Co(II), Cu(II), and Hg(II), with no observed chromogenic changes, spectral variations, or band shifts for the various tested metal ions, including Na+, Ag+, Ni2+, Mn2+, Pd2+, Pb2+, Cd2+, Zn2+, Sn2+, Fe2+, Fe3+, Cr3+ and Al3+. This absence of interaction between these metal ions and the ligand could be attributed to their compact or inadequately conducive conduction bands for complexation with the ligand's structural composition. To quantify the sensor's efficacy, fluorescence titration spectra were employed to determine the detection limits for Co2+, Cu2+ and Hg2+, yielding values of 2.92 × 10-8, 8.91 × 10-8, and 4.39 × 10-3 M, respectively. The Benesi-Hildebrand plots provided association constant values for the ligand-cobalt, ligand-copper, and ligand-mercury complexes as 0.74, 2.52, and 13.89 M-1, respectively.

Assessment of the Microbiological Potential and Spectroscopic Properties of New Imino-1,3,4-Thiadiazoles Showing the ESIPT Effect Strongly Enhanced by Aggregation

There is currently a growing interest in imino derivatives of compounds such as thiadiazoles and other groups of compounds whose extended π-electron systems enhance their photophysical properties. These compounds also show low toxicity and strong antifungal activity, making them effective against fungal pathogens in crops. For the above reasons, in the first part of the paper, the structure of the selected analogs was considered, and detailed spectroscopic analyses were conducted focusing on the excited state intramolecular proton transfer (ESIPT) process taking place in the same. Measurements were taken in terms of absorption spectroscopy and electron fluorescence, synchronous spectra, and fluorescence lifetimes, as well as calculations of fluorescence quantum efficiency in selected solvents and concentrations. In the spectral observations, the ESIPT process was manifested in several solvents as very distinct dual fluorescence. Moreover, in selected molecules, this phenomenon was strongly related to molecular aggregation, which was associated with not very efficient but nonetheless visible fluorescence of the AIE (Aggregation-Induced Emission) type. In the second part of the paper, a detailed preliminary study is presented exploring the microbiological properties of selected imino-1,3,4-thiadiazole derivatives in the context of their potential applicability as inhibitors affecting the development and growth of some of the most important fungal pathogens attacking cereal crops and posing an increasing threat to modern agriculture. Overall, the research presented in this article provides a detailed, experimental analysis of the spectroscopic properties of selected imino-thiadiazoles and points to their potential use as novel and effective solutions capable of limiting the growth and development of fungal pathogens in cereals.

Unique hemispherical coordination-drivened pesticide residue probes: Enhanced stability in linear recognition for trifluralin

Trifluralin (TRL) is an effective and persistent herbicide, but its extensive and prolonged use has increasingly posed ecological and environmental health risks, making the development of convenient and rapid TRL detection methods essential for environmental protection and food safety. In the present research, a novel fluorescent probe was designed and developed, Zn-χ-L, for the rapid and selective detection of TRL in complex environments. The sensor demonstrates excellent sensitivity and stability, while also exhibiting significant resistance to interference from other pesticides and metal ions. Moreover, Zn-χ-L exhibited stable performance across various solvents and showed resistance to interference from other pesticides and metal ions. Molecular docking and theoretical calculations indicate that the unique recognition of TRL molecules by Zn-χ-L is related to its specific hemispheric structural feature, which forms strong coordination interactions between Zn-χ-L and TRL through coordination bonds, π-π stacking, and halogen bonds. This special conformation not only enables the formation of coordination bonds but also establishes multiple π-π stacking and halogen bonding interactions between Zn-χ-L and TRL, leading to efficient charge transfer and exceptional probe performance.

A Captivating Potential of Schiff Bases Derivatives for Antidiabetic Activity

A double bond between the nitrogen and carbon atoms characterizes a wide class of compounds known as Schiff bases. The flexibility of Schiff bases is formed from several methods and may be combined with alkyl or aryl substituents. The group is a part of organic compounds, either synthetic or natural, and it serves as a precursor and an intermediate in drugs that have therapeutic action. The review focuses on molecular docking and structure-activity relationship (SAR) analysis for antidiabetic effects of the different nonmetal Schiff bases. Many studies have found that Schiff bases are used as linkers in an extensive range of synthesized compounds and other activities. Thus, this current study aims to give the scientific community a thoughtful look at the principal ideas put forward by investigators regarding antidiabetic actions exhibited by certain Schiff-based derivatives, as this review covered many aspects, including docking and SAR analysis. For individuals who intend to create novel antidiabetic compounds with Schiff bases as pharmacophores or physiologically active moieties, it will be an invaluable informational resource.

Designing and Synthesis of Novel Fexofenadine-Derived Hydrazone-Schiff Bases as Potential Urease Inhibitors: In-Vitro, Molecular Docking and DFT Investigations

Thirteen novel hydrazone-Schiff bases (3-15) of fexofenadine were succesfully synthesized, structurally deduced and finally assessed their capability to inhibit urease enzyme (in vitro). In the series, six compounds 12 (IC50=10.19±0.16 μM), 11 (IC50=15.05±1.11 μM), 10 (IC50=17.01±1.23 μM), 9 (IC50=17.22±0.81 μM), 13 (IC50=19.31±0.18 μM), and 14 (IC50=19.62±0.21 μM) displayed strong inhibitory action better than the standard thiourea (IC50=21.14±0.24 μM), while the remaining compounds displayed significant to less inhibition. LUMO and HOMO showed the transferring of charges from molecules to biological transfer and MEP map showed the chemically reactive zone appropriate for drug action are calculated using DFT. AIM charges, non-bonding orbitals, and ELF are also computed. The urease protein binding analysis benefited from the docking studies.

Symmetrical Ligand's Fabricated Porous Silicon Surface Based Photoluminescence Sensor for Metal Detection and Entrapment

This study was based on the development of surface-based photoluminescence sensor for metal detection, quantification, and sample purification employing the solid sensory chip having the capability of metal entrapment. The Co(II), Cu(II) and Hg(II) sensitive fluorescence sensor (TP) was first synthesized and characterized its sensing abilities towards tested metal ions by using fluorescence spectral investigation while the synthesis and complexation of the receptor was confirmed by the chromogenic, optical, spectroscopic and spectrometric analysis. Under optical investigation, the ligand solution exhibited substantial chromogenic changes as well as spectral variations upon reacting with copper, cobalt, and mercuric ions, while these behaviors were not seen for the rest of tested metallic ions i.e., Na+, Ag+, Ni2+, Mn2+, Pd2+, Pb2+, Cd2+, Zn2+, Sn2+, Fe2+, Fe3+, Cr3+, and Al3+. These colorimetric alterations and spectral shifting could potentially be employed to detect and quantify these specific metal ions. After the establishment of the ligand's selective complexation ability towards selected metals, it was fabricated over the substituted porous silicon surface (FPS) keeping in view of the development of surface-based photoluminescence sensor (TP-FPS) for the selected metal sensation and entrapment to purify the sample just be putting off the metal entrapped sensory solid chip. Surface characterization and ligand fabrication was inspected by plan and cross sectional electron microscopic investigations, vibrational and electronic spectral analysis. The sensitivity of the ligand (TP) in the solution phase metal discrimination was determined by employing the fluorescence titration analysis of the ligand solution after progressive induction of Co2+, Cu2+, and Hg2+, which afford the detection limit values of 2.14 × 10- 8, 3.47 × 10- 8 and 3.13 × 10- 3, respectively. Concurrently, photoluminescence titration of the surface fabricated sensor (TP-FPS) revealed detection limit values of 3.14 × 10- 9, 7.43 × 10- 9, and 8.21 × 10- 4, respectively, for the selected metal ions.

Sensing potential of C6N8 for ammonia (NH3) and nitrogen triflouride (NF3): A DFT study

The detection of toxic gases (NH3 and NF3) in regulating and monitoring air quality in the atmosphere has drawn a lot of attention. Herein, we explored a novel material (C6N8) for the detection of the important but toxic gases (NH3 and NF3). We investigated the interactions of the NH3 and NF3 with C6N8 through DFT at B3LYP, ωB97XD, and non-DFT M06-2X. Counterpoise interaction energy values (Eint. cp.) of NH3@C6N8 and NF3@C6N8 are -0.45 eV and -3.51 eV (for B3LYP), -0.42 eV and 2.11 eV (for ωB97XD) and -0.44 eV and -3.41eV (for M06-2X), respectively. Complexes having the most stable configurations were then subjected to further analyses including frontier molecular orbitals, H-L gap, and conductivity of complexes. An increase in the H-L gap in complexes (NH3@C6N8 and NF3@C6N8) is observed. The conductivity of NH3@C6N8 and NF3@C6N8 decreases as compared to C6N8. A considerable change in dipole moment was seen in C6N8 before and after complex formation. This is because of the shifting of charge between C6N8 and gases (NH3 and NF3). CHELPG and NBO charge analysis were used to evaluate the amount of charge transfer between C6N8 and gases. These analyses demonstrate that NH3 and NF3 withdraw electron density from C6N8. It was found that NH3 tends to be physically adsorbed on C6N8 while NF3 adsorbs chemically on C6N8. NCI and QTAIM analyses were performed to investigate the kind of interactions between the surface (C6N8) and gases (NH3 and NF3). Furthermore, the recovery time of NH3@C6N8 and NF3@C6N8 shows that C6N8 can be a better choice for sensing NH3 and NF3 gases.

Novel hydrazone schiff's base derivatives of polyhydroquinoline: synthesis, in vitro prolyl oligopeptidase inhibitory activity and their Molecular docking study

This research work reports the synthesis of new derivatives of the hydrazone Schiff bases (1-17) based on polyhydroquinoline nucleus through multistep reactions. HR-ESIMS,1H- and 13C-NMR spectroscopy were used to structurally infer all of the synthesized compounds and lastly evaluated for prolyl oligopeptidase inhibitory activity. All the prepared products displayed good to excellent inhibitory activity when compared with standard z-prolyl-prolinal. Three derivatives 3, 15 and 14 showed excellent inhibition with IC50 values 3.21 ± 0.15 to 5.67 ± 0.18 µM, while the remaining 12 compounds showed significant activity. Docking studies indicated a good correlation with the biochemical potency of compounds estimated in the in-vitro test and showed the potency of compounds 3, 15 and 14. The MD simulation results confirmed the stability of the most potent inhibitors 3, 15 and 14 at 250 ns using the parameters RMSD, RMSF, Rg and number of hydrogen bonds. The RMSD values indicate the stability of the protein backbone in complex with the inhibitors over the simulation time. The RMSF values of the binding site residues indicate that the potent inhibitors contributed to stabilizing these regions of the protein, through formed stable interactions with the protein. The Rg. analysis assesses the overall size and compactness of the complexes. The maintenance of stable hydrogen bonds suggests the existence of favorable binding interactions. SASA analysis suggests that they maintained stable conformations without large-scale exposure to the solvent. These results indicate that the ligand-protein interactions are stable and could be exploited to design new drugs for disease treatment.

Preparation of polylactic acid reinforced with cellulose nanofibers toward photochromic self-healing adhesive for anti-counterfeiting applications

There are a number of drawbacks with photochromic adhesives, including their poor durability, high price tag, and lackluster performance. On the other hand, self-healable adhesives have shown to be durable and robust than conventional alternatives. Hydrogel adhesives that change color in response to ultraviolet light were created for usage in self-healable authenticating stamps. In this context, a combination of cellulose nanofibers (CNFs), polylactic acid (PLA) and nanoparticles of lanthanide aluminate (NLA) were prepared to generate an organic-inorganic hybrid hydrogel adhesive with self-healing properties. NLA agglomerates were avoided due to the use of CNFs as a nanofiller and dispersion agent. Colorless stamps require that NLA to be dispersed consistently in the CNFs/PLA hydrogel without clumping. This film becomes green when irradiated with ultraviolet, as indicated by luminescence spectra and CIE Lab coordinates. When illuminated at 365 nm, the paper sheets emitted light with a wavelength of 519 nm. The morphologies of prints were analyzed by different analytical methods. Diameter measurements from a transmission electron microscope (TEM) of the synthesized NLA ranged from 5 to 9 nm, whereas CNFs displayed diameters of 40-60 nm. The current NLA@CNFs/PLA hydrogel presents a reliable anti-counterfeiting solution for various authenticating products.

Mo-based MXenes: Synthesis, properties, and applications

Ti-MXene allows a range of possibilities to tune their compositional stoichiometry due to their electronic and electrochemical properties. Other than conventionally explored Ti-MXene, there have been ample opportunities for the non-Ti-based MXenes, especially the emerging Mo-based MXenes. Mo-MXenes are established to be remarkable with optoelectronic and electrochemical properties, tuned energy, catalysis, and sensing applications. In this timely review, we systematically discuss the various organized synthesis procedures, associated experimental tunning parameters, physiochemical properties, structural evaluation, stability challenges, key findings, and a wide range of applications of emerging Mo-MXene over Ti-MXenes. We also critically examined the precise control of Mo-MXenes to cater to advanced applications by comprehensively evaluating the summary of recent studies using artificial intelligence and machine learning tools. The critical future perspectives, significant challenges, and possible outlooks for successfully developing and using Mo-MXenes for various practical applications are highlighted.

Study on the modulating effect of halogen atom substitution on the detection range of water content detection probes in organic solvents

Fluorescence probes based on the variations of aggregation state (Aggregation-Induced Emission (AIE) and Aggregation-Caused Quenching (ACQ)) have received widespread attention due to their simplicity, efficiency and intuitiveness. However, typical probes are highly sensitive to changes in polarity and slight variations in the external environment can cause a complete change in the aggregation state. With the aim of expanding the detection range of the molecular probe, this work adopts a different design strategy from adjusting the molecular backbone but regulates the fluorescence behavior of the Schiff base molecular backbone by introducing different halogen atoms. Systematic studies show that when chlorine serves as substitutional atoms (3,5-Cl Salen), the probe can achieve full-range detection of water content (0-100 vol%) in ethanol and DMF. To our knowledge, the 3,5-Cl Salen represents the best water content probe in organic molecules. Experimental and theoretical studies have shown that the adjustment of halogen atoms can linearly change the charge distribution on the benzene ring and precisely control the strength of intermolecular interactions. At the same time, we developed a fluorescent filter paper based on 3,5-Cl Salen and used smartphones for rapid, sensitive and precise on-site measurement of water content in organic solvents.

4D printing light-driven actuator with lignin photothermal conversion module

Light-responsive shape memory polymers are attractive as they can be activated through remote and spatially-controlled light. In this work, 4D printing of poly(lactic acid) (PLA) composites with a near-infrared light-responsive was achieved by using the simple melt blending method and adding 3 wt% of lignin. Lignin with a conjugated structure was used as the photothermal conversion module. The composites exhibited significant photothermal effects under near-infrared (808 nm) laser irradiation, and the laser irradiation was also effective in initiating and controlling the shape memory. The structure of lignin can be improved by the action of dicumyl peroxide (DCP) to enhance the interfacial adhesion between polyamide elastomer (PAE) and polylactic acid (PLA), reduce the size of dispersed phases, and serve as an effective rheological modifier to exhibit the ideal melt viscosity required for 3D printing of composites. The good mechanical, thermal stability, and rheological properties provide assurance for the 4D printing of composites. This research provides an environmentally friendly and practical method for creating composites that have the potential to serve as ideal actuator components in a range of applications.

A graphene oxide/polyaniline nanocomposite biosensor: synthesis, characterization, and electrochemical detection of bilirubin

The level of free bilirubin is a considerable index for the characterization of jaundice-related diseases. Herein, a biosensor was fabricated via the immobilization of bilirubin oxidase (BOx) on graphene oxide (GO) and polyaniline (PANI) that were electrochemically co-precipitated on indium tin oxide (ITO) conductive glass. The structural enzyme electrode was characterized by FTIR, XRD, and Raman spectroscopy, while the spectral and thermal properties were investigated by UV-vis and thermogravimetric analysis (TGA). Owing to the activity of the fabricated BOx/GO@PANI/ITO biosensor, it could detect free bilirubin with good selectivity and sensitivity in a low response time. The electrochemical response was studied using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). At polarization potential 0.2 V vs. Ag/AgCl, the fabricated sensor illustrated a response in only 2 s at 30 °C and pH 7.5. The LOD and LOQ for the BOx/GO@PANI/ITO biosensor were calculated and found to be 0.15 nM and 2.8 nM, respectively. The electrochemical signal showed a linear response in the concentration range 0.01-250 μM. At 5 °C, the biosensor demonstrated a half-time of 120 days, through which it could be utilized 100 times at this temperature conditions. By using a common colorimetric method, the data on bilirubin levels in serum showed a determination coefficient (R2) of 0.97.

Pseudomonas fluorescens and L-tryptophan application triggered the phytoremediation potential of sunflower (Heliantus annuus L.) in lead-contaminated soil

Lead, a toxic heavy metal present in soil, hampers biological activities and affects the metabolism of plants, animals, and human beings. Its higher concentration may disturb the various physio-chemical processes, which result in stunted and poor plant growth. An interactive approach of plant growth promoting rhizobacteria (PGPR) and L-tryptophan can be used to mitigate the lethal effects of lead. A pot experiment was conducted, and two weeks before sowing, the level of lead (300 mg kg-1) was maintained by spiking the PbCl2 salt. Pseudomonas fluorescens and L-tryptophan were applied individually as well as in combination to segregate the effect of both in contaminated soil under a completely Randomized Design (CRD). Statistical analysis revealed that plant growth was significantly reduced up to 22% due to lead contamination. However, the interactive approach of PGPR and L-tryptophan significantly improved the plant growth, physiology, and yield with relative productive index (RPI) under a lead-stressed environment. Moreover, integrated use of PGPR and L-tryptophan demonstrated a considerable increase (22%) in lead removal efficiency (LRE) by improving bioconcentration factor (BCF) and translocation factor (TF) for shoot without increasing the lead concentration in achenes. The reduced lead concentration in achene was due to its immobilization in shoot and root by negatively charged particles and improved the lead sequestration in vegetative parts which abridged the translocation of lead into achenes.

Palladium complex supported on the surface of magnetic Fe3O4 nanoparticles: an ecofriendly catalyst for carbonylative Suzuki-coupling reactions

Diaryl ketone derivatives include well-known compounds with important physiological and biological properties. In order to prepare diaryl ketone derivatives, we constructed a pallidum (0) complex immobilized on Fe3O4 nanoparticles modified with aminobenzoic acid and phenanthroline [Fe3O4@ABA/Phen-DCA-Pd(0)], and evaluated its catalytic performance for carbonylative Suzuki-coupling reactions of aryl iodides with aryl boronic acid in the presence of Mo(CO)6 as the CO source under mild conditions. FT-IR, SEM, TEM, EDX, VSM, TGA, XRD, ICP-OES and Elemental mapping techniques were employed to identify the structure of the Fe3O4@ABA/Phen-DCA-Pd(0) nanocatalyst. Different derivatives of aryl iodides and aryl boronic acids containing withdrawing and donating functional groups were studied for the preparation of diaryl ketones. Also, various derivatives of heteroaryl iodides and boronic acids were used and the desired products were prepared with high yields. The Fe3O4@ABA/Phen-DCA-Pd(0) nanocatalyst was separated magnetically and reused 7 consecutive times without reducing its catalytic activity. VSM, TEM and ICP-OES spectroscopic techniques confirmed that the synthesized Fe3O4@ABA/Phen-DCA-Pd(0) catalyst was still stable and maintained its structure despite repeated reuse.

Pillaring Behavior of Organic Molecules on MXene: Insights from Molecular Dynamics Simulations

Pillaring MXene with organic molecules is an effective approach to expand the interlayer spacing and increase the accessible surface area for enhanced performance in energy storage applications. Herein, molecular dynamics simulations are employed to explore the pillaring effect of six organic molecules on Ti3C2O2. The interlayer spacing and structural characteristics of MXene after the insertion of different organic molecules are examined, and the influence of the type and quantity of organic molecules on the pillared MXene structure is systematically investigated. The results demonstrate that the inserted molecules are influenced by interactions between MXene layers, resulting in a thinner morphology. Effective pillar support on MXene is achieved only when a specific quantity of organic molecules is inserted between the layers. Furthermore, different organic molecules occupy distinct surface areas on MXene when acting as pillars. Pillaring molecules with a Pi-conjugated ring structure require a larger surface area on MXene, whereas those with a branched structure occupy a smaller surface area. Additionally, organic molecules containing oxygen functional groups tend to aggregate due to hydrogen bonding, impeding their diffusion within MXene sheets. Considering the interlayer expansion of MXene, surface area occupation, and diffusion characteristics, the isopropylamine demonstrates the most favorable pillaring effect on MXene. These findings provide valuable insights into the design and application of pillared MXenes in energy storage and other applications. Further studies on the properties and applications of the optimized pillared MXene structures will be conducted in the future.

Magnetic nanoparticles modified with a copper(i) complex as a novel and efficient reusable catalyst for A3 coupling leading to C-N bond formation

Propargylamines are an important and valuable family of nitrogen-containing compounds with many applications in the fields of medical, industrial, and chemical processes. One-pot multicomponent A3 coupling reactions of aldehydes, amines, and alkynes in the presence of transition metals as catalysts is an efficient strategy for preparing propargylamines. In this study, we fabricated a novel magnetically reusable copper nanocatalyst [Fe3O4-BIm-Pyrim-CuI] through the immobilization of the copper(i) complex on the surface of the magnetic nanoparticles modified with benzimidazole-pyrimidine ligand and evaluated its catalytic activity in the preparation of propargylamines through one-pot multicomponent A3 coupling reactions of aldehydes, amines, and alkynes. Under this catalytic system, aryl substrates with both electron-donating and electron-withdrawing substituents also gave the desired products in excellent yields under standardized conditions. The Fe3O4-BIm-Pyrim-CuI catalyst was easily separated using an external magnet, and the recovered catalyst was reused in 8 cycles without significant loss of activity.

Synthesis of palladium nanoparticles stabilized on Schiff base-modified ZnO particles as a nanoscale catalyst for the phosphine-free Heck coupling reaction and 4-nitrophenol reduction

Recently, the development of heterogeneous nanocatalytic systems using solid supports has been gaining importance due to some advantages such as easy handling, high thermal stability, high efficiency, reusability, and so on. Therefore, the design of catalyst supports for the preparation of stable heterogeneous catalytic systems is of great importance. In this work, Schiff base-modified ZnO particles have been developed (ZnO-Scb) as a novel support. A heterogeneous nanocatalyst system has then been prepared by immobilizing palladium nanoparticles (Pd NPs) on the ZnO-Scb surface as the support. The resulting palladium nanocatalyst (Pd-ZnO-Scb) structure has been characterized by different analytical techniques (FT-IR, XRD, TEM, FE-SEM, elemental mapping and EDS) and used to catalyze the Heck coupling reactions and 4-nitrophenol (4-NP) reduction. Test results revealed that Pd-ZnO-Scb could effectively couple various aryl halides with styrene in yields of up to 98% in short reaction times. Pd-ZnO-Scb was also efficiently used in the complete 4-NP reduction within 135 s at room temperature. Additionally, it was found that Pd-ZnO-Scb was more effective than other reported catalysts in the Heck coupling reaction. Moreover, the recycling tests indicated that Pd-ZnO-Scb could be easily isolated from the reaction medium and reused in seven consecutive catalytic runs while retaining its nanostructure.

Microfluidic synthesis of pH-responsive molecularly imprinted silica nanospheres for fluorescence sensing target glycoprotein

Here, fluorescent artificial antibodies for sensing ovalbumin in food were synthesized by molecular imprinting technique in a microfluidic reactor. A phenylboronic acid-functionalized silane was employed as the functional monomer to enable the polymer has pH-responsive property. Fluorescent molecularly imprinted polymers (FMIPs) could be produced continuously in a short time. Both fluorescein isothiocyanate (FITC) and rhodamine B isothiocyanate (RB)-based FMIPs can specifically recognize the target ovalbumin, particularly FITC-based FMIP, giving an imprinting factor of 2.5 and cross-reactivity factors of 2.7 (ovotransferrin), 2.8 (β-lactoglobulin) and 3.4 (bovine serum albumin), and was applied for the detection of ovalbumin in milk powder with recovery rates of 93-110%; moreover, the FMIP can be reused at least four times. Such FMIPs have promising future in replacing the fluorophore-labelled antibodies to fabricate fluorescent sensing devices or establish immunoassay methods, which have extra merits of low-cost, high stability and recyclability, easy to carry and store at ambient environments.

Supramolecular Dimer as High-Performance pH Probe: Study on the Fluorescence Properties of Halogenated Ligands in Rigid Schiff Base Complex

The development of high-performance fluorescence probes has been an active area of research. In the present work, two new pH sensors Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn based on a halogenated Schiff ligand (3,5-Cl-saldmpn = N, N'-(3,3'-dipropyhnethylamine) bis (3,5-chlorosalicylidene)) with linearity and a high signal-to-noise ratio were developed. Analyses revealed an exponential intensification in their fluorescence emission and a discernible chromatic shift upon pH increase from 5.0 to 7.0. The sensors could retain over 95% of their initial signal amplitude after 20 operational cycles, demonstrating excellent stability and reversibility. To elucidate their unique fluorescence response, a non-halogenated analog was introduced for comparison. The structural and optical characterization suggested that the introduction of halogen atoms can create additional interaction pathways between adjacent molecules and enhance the strength of the interaction, which not only improves the signal-to-noise ratio but also forms a long-range interaction process in the formation of the aggregation state, thus enhancing the response range. Meanwhile, the above proposed mechanism was also verified by theoretical calculations.

Alkali metal-doped borospherenes M@C4B32 (M = K, Na, and Li) as a highly efficient alternative for the drug delivery

CONTEXT

Nanomaterials enjoy a great surface-to-surface area ratio, small size, extremely high stability, satisfactory bio-compatibility, improved permeability, specificity in receptor targeting, and tunable lifetime. This paper investigates alkali metal-doped borospherenes M@C4B32 (in which M denotes K, Na, and Li) as a highly efficient alternative for the delivery of drugs using density functional theory (DFT) calculations. A borospherene with a B36 nanocage doped with four C atoms (i.e., C4B32) recently showed promising performance. Therefore, the present work investigates C4B32 nanoclusters doped with alkali metals for the effective delivery of drugs.

METHODS

This paper primarily seeks to evaluate the interaction between thioguanine (TG) as a cancer drug and pristine M@C4B32 through DFT (PBE/6-31 + G (d)) calculations. The UV-Vis spectroscopy indicated a redshift in the complex electronic spectra to higher wavelengths (i.e., lower energy levels). Hence, K@C4B32 was concluded to be effective in TG delivery.

Iron(II) Mediated Supramolecular Architectures with Schiff Bases and Their Spin-Crossover Properties

Supramolecular architectures, which are formed through the combination of inorganic metal cations and organic ligands by self-assembly, are one of the techniques in modern chemical science. This kind of multi-nuclear system in various dimensionalities can be implemented in various applications such as sensing, storage/cargo, display and molecular switching. Iron(II) mediated spin-crossover (SCO) supramolecular architectures with Schiff bases have attracted the attention of many investigators due to their structural novelty as well as their potential application possibilities. In this paper, we review a number of supramolecular SCO architectures of iron(II) with Schiff base ligands exhibiting varying geometrical possibilities. The structural and SCO behavior of these complexes are also discussed in detail.

Investigation of the substituted-titanium nanocages using computational chemistry

We are investigated substitution effects of titanium heteroatoms on band gap, charge and local reactivity of C_20-nTi_n heterofullerenes (n = 1-5), at different levels and basis sets. The C₁₈Ti_2-2 nanocage is considered as the most kinetically stable species with the widest band gap of 2.86 eV, in which two carbon atoms are substituted by two Ti atoms in equatorial position, individually. The charges on carbon atoms of C₂₀ are roughly zero, while high positive charge (1.256) on the surface of C₁₉Ti₁ prompts this heteofullerene for hydrogen storage. The positive atomic charge on Ti atoms and negative atomic charge on their adjacent C atoms implies that these sites can be influenced more readily by nucleophilic and electrophilic regents, respectively. We examined the usefulness of local reactivity descriptors to predict the reactivity of Ti-C atomic sites on the external surface of the heterofullerenes. The properties determined include Fukui function (F.F.); f (k) and local softness s (k) on the surfaces of the investigated hollow cages. Geometry optimization results reveal that titanium atoms can be comfortably incorporated into the CC network of fullerene. It is most likely associated with the triple-coordination characteristic of titanium atoms, which can well match with the sp²-hybridized carbon bonding structure. According to the values of f (k) and s (k) for the C₁₅Ti₅ heterofullerene; the carbon atoms in the cap regions exhibit a different reactivity pattern than those in the equatorial portion of the heterofullerene. The titanium impurity can significantly improve the fullerene's surface reactivity and it allows controlling their surface properties. The band gap of C_20-nTi_n …..(H₂)_n structures is decreased with increasing n. Hence, C₁₅Ti₅ is found as the best hydrogen adsorbent.

Using the aluminum decorated graphitic-C3N4 quantum dote (QD) as a sensor, sorbent, and photocatalyst for artificial photosynthesis; a DFT study

In this project, we have investigated the possibility of mimicking the natural photosynthesis, as well as sensing and adsorption application of aluminum decorated graphitic C₃N₄ (Al-g-C₃N₄) QDs (toward some air pollutants containing CO, CO₂, and SO₂). The results of the potential energy surface (PES) studies show that in all three adsorption processes, the energy changes are negative (-10.70 kcal mol^-1, -16.81 kcal mol^-1, and -79.97 kcal mol^-1 for CO, CO₂, and SO₂ gasses, respectively). Thus, all of the adsorption processes (mainly SO₂) are spontaneous. Moreover, the frontier molecular orbital (FMO) investigations indicate that the Al-g-C₃N₄ QD could be used as a suitable semiconductor sensor for detection of CO, and CO₂ (as carbon oxides) in one hand, and SO₂ gaseous species on the other hand. Finally, the results reveal that those QDs could be applied for artificial photosynthesis (in presence of CO₂; Δμ^h-e = 1.43 V), and for water splitting process for the H₂ generation (Δμ^h-e = 1.23 V) as a clean fuel for near future.

[5-Bromo-2-(2-(dimethylamino)ethyliminomethyl)phenolato-κ3 N,N′,O]-isothiocyanato-nickel(II), C12H14BrN3NiOS

C12H14BrN3NiOS, monoclinic, P21/c (no. 14), a = 7.0191(5) Å, b = 10.8476(7) Å, c = 19.0237(12) Å, β = 95.564(2), V = 1441.65(17) Å3, Z = 4, R gt (F) = 0416, wR ref (F 2) = 0.1007, T = 148 K.

High efficiency of Ag0 decorated Cu2MoO4 nanoparticles for heterogeneous photocatalytic activation, bactericidal system, and detection of glucose from blood sample

The novel Ag0/Cu2MoO4 nanoparticles was simply synthesized via chemical method. Ag/Cu2MoO4 nanoparticles was characterized by FESEM image, XRD curve, UV-vis spectroscopy, BET analysis, and XPS spectrum. XRD pattern depicts that the cubic crystalline phase of particles. The band gap of Ag/Cu2MoO4 nanoparticles was achieved to 2.04 eV, which that depicted the best activity under visible light irradiation. Ag/Cu2MoO4 nanoparticles exhibits 99.74% degradation under light and persulfate ion which was higher response than Cu2MoO4 nanoparticles (83.56%) under this condition. The scavenging test indicates the important reactive species in removal process were •OH, and •SO4-. The Ag/Cu2MoO4 nanoparticles was indicated highly photo-stability for the MG degradation after 5th cycle. Ag/Cu2MoO4 exhibits substantial antibacterial properties against P. aeruginosa and S. pneumoniae. Moreover, Ag/Cu2MoO4 nanoparticles was experimented to peroxidase-like performance for the colorimetric detection of glucose with the Limit of Detection about 52.23 nM.

Fluorescent and Phosphorescent Nitrogen-Containing Heterocycles and Crown Ethers: Biological and Pharmaceutical Applications

Fluorescent molecules absorb photons of specific wavelengths and emit a longer wavelength photon within nanoseconds. Recently, fluorescent materials have been widely used in the life and material sciences. Fluorescently labelled heterocyclic compounds are useful in bioanalytical applications, including in vivo imaging, high throughput screening, diagnostics, and light-emitting diodes. These compounds have various therapeutic properties, including antifungal, antitumor, antimalarial, anti-inflammatory, and analgesic activities. Different neutral fluorescent markers containing nitrogen heterocycles (quinolones, azafluoranthenes, pyrazoloquinolines, etc.) have several electrochemical, biological, and nonlinear optic applications. Photodynamic therapy (PDT), which destroys tumors and keeps normal tissues safe, works in the presence of molecular oxygen with light and a photosensitizing drugs (dye) to obtain a therapeutic effect. These compounds can potentially be effective templates for producing devices used in biological research. Blending crown compounds with fluorescent residues to create sensors has been frequently investigated. Florescent heterocyclic compounds (crown ether) increase metal solubility in non-aqueous fluids, broadening the application window. Fluorescent supramolecular polymers have widespread use in fluorescent materials, fluorescence probing, data storage, bio-imaging, drug administration, reproduction, biocatalysis, and cancer treatment. The employment of fluorophores, including organic chromophores and crown ethers, which have high selectivity, sensitivity, and stability constants, opens up new avenues for research. Fluorescent organic compounds are gaining importance in the biological world daily because of their diverse functionality with remarkable structural features and positive properties in the fields of medicine, photochemistry, and spectroscopy.

Crystal structure of 2-chloro-6-formylphenolato-κ2O,O′-(6,6′-(((2,2-dimethylpropane-1,3-diyl)bis(azaneylylidene))bis(methaneylylidene))bis(2-chlorophenolato)κ4 N,N,O,O′)cobalt(III), C26H22Cl3CoN2O4

C26H22Cl3CoN2O4, triclinic, P 1 ‾ $P\overline{1}$ (no. 2), a = 11.1835(5) Å, b = 11.6782(5) Å, c = 11.9295(5) Å, α = 83.900(3)°, β = 66.911(4)°, γ = 64.232(4)°, V = 1286.83(11) Å3, Z = 2, R gt (F) = 0375, wR ref (F 2) = 0.0899, T = 213.0 K.

DFT calculations, structural analysis, solvent effects, and non-covalent interaction study on the para-aminosalicylic acid complex as a tuberculosis drug: AIM, NBO, and NMR analyses

In this study, the effect of non-covalent interactions on the para-aminosalicylic acid complex is explored using density functional theory (DFT) in the gas phase and the solution. Our findings exhibit that the achieved binding energies considerably change on going from the gas phase to the solution. Based on the obtained results, the absolute value of the binding energy of the complex in the polar solvents is lower than the non-polar ones while in the gas phase it is higher than the solution. The atoms in molecules (AIM) and the natural bond orbital (NBO) analyses are applied to estimate the topological properties and the charge transfer during complexation, respectively. The results indicate that the presence of the cation-π interaction increases the strength of the intramolecular hydrogen bond in the studied complex. Finally, the various electronic descriptors such as energy gap, hardness, softness, and electronic chemical potential are investigated to gain further insight into these interactions. According to the achieved results, the high energy gap of the complex in the water solvent indicates high chemical stability and low reactivity compared to the others. On the other hand, the most reactive as well as the softest complex belongs to the gas phase.

Adsorption of thiotepa anticancer drugs on the C3N nanotube as promising nanocarriers for drug delivery

This paper focused on the efficiency of carbon nitride nanotubes functionalized with alanine amino acid (f-C₃NNTs) in thiotepa (TPA) anti-cancerous drug delivery via density functional theory (DFT). Pristine C₃NNTs were incorporated for comparison. TPA was found to spontaneously undergo exothermic adsorption onto the nanostructures. The f-C₃NNT/TPA complexes showed the highest interaction strength. The adsorption distance of TPA was found to be smaller, with a greater adsorption capacity and solubility on the f-C₃NNT surface than on the pristine C₃NNT surface. As they were polar, all the complexes were concluded to be insoluble within an aqueous phase. The quantum molecular descriptors revealed the f-C₃NNT nanocarriers to be more reactive than the C₃NNT carrier. The drug was found to spontaneously and exothermically interact with f-C₃NNT. As a result, f-C₃NNT would be promising for TPA adsorption in drug delivery applications.