Occurrence of Antibiotics, Antibiotic Resistance Genes and Viral Genomes in Wastewater Effluents and Their Treatment by a Pilot Scale Nanofiltration Unit

Tetracycline degradation by a mixed culture of halotolerant fungi-bacteria under static magnetic field: Mechanism and antibiotic resistance genes transfer

Efficient antibiotics removal lowers the transmission risk of antibiotic resistance genes (ARGs). However, low efficiency limits the application of biological methods for antibiotics removal. Herein, a mixed culture of halotolerant fungi-bacteria was used for treatment of saline wastewater containing tetracycline (TC). Furthermore, static magnetic field (SMF) was used to increase TC removal. The study examined the effectiveness of SMF in removing antibiotics from saline wastewater and the associated risk of ARGs transmission. The results demonstrated that the application of a 40 mT SMF significantly improved the TC removal efficiency by 37.09 %, compared to the control (SMF=0) The TC was mainly removed through biodegradation and adsorption. In biodegradation, SMF enhanced electron transport system activity, and activities of lignin-degrading enzymes which led to higher TC biodegradation. The activity of lactate dehydrogenase and malondialdehyde decreased, lowering the damage of microbial cell membranes by TC. During the adsorption process, higher generation of extracellular polymeric substances was observed under SMF, which caused an increase in TC removal via adsorption. Microbial community analysis revealed that SMF facilitated the enrichment of TC-degrading microorganisms. Under SMF, vertical gene transfer of ARGs increased, while horizontal gene transfer risk decreased due to a reduction in mobile genetic elements (intl1) abundance. This study demonstrates that SMF is a promising strategy for enhancing TC removal efficiency, providing a basis for improved antibiotic wastewater management.

Effects of UVC doses on the removal of antimicrobial resistance elements from secondary treated sewage

Wastewater treatment plants (WWTPs) currently face major challenges toward the removal of microcontaminants and/or microbial matrices and consequently play an important role in the potential dissemination of biological resistance in freshwater. The ultraviolet (UV) system is a tertiary treatment strategy increasingly applied worldwide, although many studies have shown that disinfected effluent can still contain antibiotic-resistant bacteria and resistance genes. Therefore, to better understand the effects of UV radiation doses on the removal of all resistance elements (antibiotics, antibiotic-resistant bacteria, and antibiotic resistance genes), the present study was designed using a pilot-scale photoreactor. The UV doses could be varied to investigate whether there is an optimal UV dose capable of removing all resistance elements and also if the UV dose frequently applied in full-scale systems is able to reduce the resistance elements. The effect of different UV doses (A, 0-10 mJ/cm2; B, 10-15 mJ/cm2; and C, > 15 mJ/cm2) in a pilot-scale photoreactor on the removal of antibiotics, antibiotic-resistant bacteria, and genes from the effluent of a UASB reactor followed by a biological trickling filter system (UASB-TF) fed with real sanitary sewage was investigated. Samples of influent and effluent from the UVC photoreactor were collected, and the concentration levels of norfloxacin (NOR), ciprofloxacin (CIP), and levofloxacin (LEV) were assessed. The qnrB, sul1, ermB, integron-integrase (intI1), and 16S rRNA genes, total heterotrophic bacteria (THB), and bacterial resistance to azithromycin and sulfamethoxazole were also investigated. Results indicated that LEV and intI1 were found in the highest median concentrations in the photoreactor influent. Although most antibiotics (NOR and CIP) and ARGs (intI1, 16S rRNA, and qnrB) were apparently better removed with the highest UV dose (> 15 mJ/cm2) applied, except for LEV, sul1, and ermB genes, the Kruskal-Wallis test reported no significant difference between low and high doses. ARB removal (from 80 to 100%) was observed at all UV doses. Principal component analysis (PCA) suggested a clear pattern of pollutant groups, i.e., antibiotics, ARG, and ARB, which exhibited low (median of 8-16%), medium (37-96%), and high (> 97%) removal percentages, respectively. These results demonstrated that UVC photoreactors can be an alternative to complement biological treatment in sewage treatment plants at the dose normally applied in full-scale WWTPs (> 15 mJ/cm2). However, there was no optimal single dose capable of removing all the resistance elements investigated.

Efficient adsorptive removal of levofloxacin using sulfonated graphene oxide: Adsorption behavior, kinetics, and thermodynamics

Water pollution by antibiotic residues poses a potential threat to environmental and human health. Graphene-based materials are highly stable, recyclable and effective adsorbents for efficiently removing antibiotics from polluted water. In this study, the adsorption behavior of levofloxacin onto sulfonated graphene oxide (SGO) was investigated by varying the contact period, solution pH, adsorbent quantity, levofloxacin concentration, inorganic ions, and solution temperature. Spectroscopic and microscopic techniques were employed to confirm the adsorptive interaction between levofloxacin and SGO. The adsorption process was most accurately characterized by the pseudo-second-order kinetic model and the Langmuir isotherm model, as indicated by their high correlation coefficients (R 2) and low root-mean-square error (RMSE) values. The maximal quantity of levofloxacin that can be adsorbed onto SGO was determined to be 1250 μmol/g at pH 4 and 25 °C using the Langmuir model. Thermodynamic studies reveal that the process of levofloxacin adsorption onto SGO is endothermic and spontaneous in nature. Taking into consideration the results of adsorption, desorption and regeneration studies, it is proposed that SGO can be applied as an economic viable agent for the adsorptive removal of levofloxacin from the aqueous environment.

Temporal variations of antimicrobial resistance genes in aerosols: A one-year monitoring at the puy de Dôme summit (Central France)

The recent characterization of antibiotic resistance genes (ARGs) in clouds evidenced that the atmosphere actively partakes in the global spreading of antibiotic resistance worldwide. Indeed, the outdoor atmosphere continuously receives large quantities of particles of biological origins, emitted from both anthropogenic or natural sources at the near Earth's surface. Nonetheless, our understanding of the composition of the atmospheric resistome, especially at mid-altitude (i.e. above 1000 m a.s.l.), remains largely limited. The atmosphere is vast and highly dynamic, so that the diversity and abundance of ARGs are expected to fluctuate both spatially and temporally. In this work, the abundance and diversity of ARGs were assessed in atmospheric aerosol samples collected weekly between July 2016 and August 2017 at the mountain site of puy de Dôme (1465 m a.s.l., central France). Our results evidence the presence of 33 different subtypes of ARGs in atmospheric aerosols, out of 34 assessed, whose total concentration fluctuated seasonally from 59 to 1.1 × 105 copies m-3 of air. These were heavily dominated by genes from the quinolone resistance family, notably the qepA gene encoding efflux pump mechanisms, which represented >95 % of total ARGs concentration. Its abundance positively correlated with that of bacteria affiliated with the genera Kineococcus, Neorhizobium, Devosia or Massilia, ubiquitous in soils. This, along with the high abundance of Sphingomonas species, points toward a large contribution of natural sources to the airborne ARGs. Nonetheless, the increased contribution of macrolide resistance (notably the erm35 gene) during winter suggests a sporadic diffusion of ARGs from human activities. Our observations depict the atmosphere as an important vector of ARGs from terrestrial sources. Therefore, monitoring ARGs in airborne microorganisms appears necessary to fully understand the dynamics of antimicrobial resistances in the environment and mitigate the threats they may represent.

Passive Sampler Technology for Viral Detection in Wastewater-Based Surveillance: Current State and Nanomaterial Opportunities

Although wastewater-based surveillance (WBS) is an efficient community-wide surveillance tool, its implementation for pathogen surveillance remains limited by ineffective sample treatment procedures, as the complex composition of wastewater often interferes with biomarker recovery. Moreover, current sampling protocols based on grab samples are susceptible to fluctuant biomarker concentrations and may increase operative costs, often rendering such systems inaccessible to communities in low-to-middle-income countries (LMICs). As a response, passive samplers have emerged as a way to make wastewater sampling more efficient and obtain more reliable, consistent data. Therefore, this study aims to review recent developments in passive sampling technologies to provide researchers with the tools to develop novel passive sampling strategies. Although promising advances in the development of nanostructured passive samplers have been reported, optimization remains a significant area of opportunity for researchers in the area, as methods for flexible, robust adsorption and recovery of viral genetic materials would greatly improve the efficacy of WBS systems while making them more accessible for communities worldwide.

Study effect and mechanism of levofloxacin on the neurotoxicity of Rana nigromaculata tadpoles exposed to imidacloprid based on the microbe-gut-brain axis

Aquatic organisms may be simultaneously exposed to antibiotics and pesticides. After levofloxacin (LVFX), imidacloprid (IMI) exposure and co-exposure at environmental levels, we found LVFX and IMI had antagonistic effect on the neurotoxicity of tadpoles. IMI-induced neurotoxicity on tadpoles can be explained by oxidative stress and hormone levels in some degree. By regulating ornithine, l-asparagine, putrescine and tryptamine in the intestine, LVFX affected glutathione metabolism, arginine and proline metabolism, alanine, aspartate and glutamate metabolism, tyrosine metabolism and aminoacyl tRNA biosynthesis, so then eased the neurotoxicity caused by IMI. More interestingly, Fusobacteriota and Cetobacterium might play an important role on easing the neurotoxicity caused by IMI. In addition, LVFX might have a laxation effect on the increased relative abundance of Bacteroidota caused by IMI. In conclusion, IMI not only affected oxidative stress and hormone levels in the brain, but also affected the synthesis of neurotransmitters in the intestine by regulating intestinal microbiota. In LVFX and IMI co-exposed groups, LVFX alleviated the neurotoxicity caused by IMI through regulating the intestinal microbiota, showing as an antagonistic effect. Our results provided a new perspective for aquatic ecological risk assessment under co-exposure of antibiotics and pesticides.

Quantification of antibiotic resistance genes (ARGs) in clouds at a mountain site (puy de Dôme, central France)

Antibiotic resistance in bacteria is becoming a major sanitary concern worldwide. The extensive use of large quantities of antibiotics to sustain human activity has led to the rapid acquisition and maintenance of antibiotic resistant genes (ARGs) in bacteria and to their spread into the environment. Eventually, these can be disseminated over long distances by atmospheric transport. Here, we assessed the presence of ARGs in clouds as an indicator of long-distance travel potential of antibiotic resistance in the atmosphere. We hypothesized that a variety of ARGs can reach the altitude of clouds mainly located within the free troposphere. Once incorporated in the atmosphere, they are efficiently transported and their respective concentrations should differ depending on the sources and the geographical origin of the air masses. We deployed high-flow rate impingers and collected twelve clouds between September 2019 and October 2021 at the meteorological station of the puy de Dôme summit (1465 m a.s.l., France). Total airborne bacteria concentration was assessed by flow cytometry, and ARGs subtypes of the main families of antibiotic resistance (quinolone, sulfonamide, tetracycline; glycopeptide, aminoglycoside, β-lactamase, macrolide) including one mobile genetic element (transposase) were quantified by qPCR. Our results indicate the presence of 29 different ARGs' subtypes at concentrations ranging from 1.01 × 10³ to 1.61 × 10⁴ copies m^-3 of air. Clear distinctions could be observed between clouds in air masses transported over marine areas (Atlantic Ocean) and clouds influenced by continental surfaces. Specifically, quinolones (mostly qepA) resistance genes were prevalent in marine clouds (54 % of the total ARGs on average), whereas higher contributions of sulfonamide, tetracycline; glycopeptide, β-lactamase and macrolide were found in continental clouds. This study constitutes the first evidence for the presence of microbial ARGs in clouds at concentrations comparable to other natural environments. This highlights the atmosphere as routes for the dissemination of ARGs at large scale.

N-doped and activated porous biochar derived from cocoa shell for removing norfloxacin from aqueous solution: Performance assessment and mechanism insight

Environmental pollution has worsened as a result of antibiotic overuse. Nitrogen doping of biochar increases its ability to adsorb antibiotics and has been widely applied as an adsorbent. In this study, we synthesized nitrogen-doped biochar (N-A) from cocoa shell wastes calcined with urea and sodium bicarbonate (NaHCO₃) as nitrogen sources and green activators, respectively. An analysis of the biochar morphology, structure, specific surface area, and functional groups provided an understanding of its properties. As indicated by increased surface area, micropores, and surface functional groups, biochar was enhanced in its performance for norfloxacin adsorption when activated using NaHCO₃ and nitrogen doped. Adsorption experiments revealed that N-A biochar at 700 and 400 °C had a high adsorption capacity for NOR of 134 mg/g (N-A-CSB700) and 112.31 mg/g (N-A-CSB400) when compared to pristine biochar at 59.27 mg/g (CSB700) and 56.34 mg/g (CSB400), indicating that N-A doped modification on biochar greatly improved adsorption capacity. The Langmuir model demonstrated better NOR adsorption isotherms. The pseudo-second order and Elovich models closely followed the adsorption kinetics. Further investigations were conducted to determine how environmental factors influence biochar interaction with NOR. The results indicated a stable NOR removal efficiency was kept at a wide pH range, whereas the ionic strength inhibited the NOR adsorption process. The investigation into the sorption mechanism revealed that pore filling, H-bonding, π-π EDA interactions, ion exchange, and electrostatic attraction may all be implicated in the NOR adsorption process. Specifically, pore filling played the dominant role for N-A-CSB700, while N-A-CSB400 sorption occurred mainly via H-bonding. Since N-A-CSB700 doped biochar combines high adsorption capacity with a low inhibition effect of environmental factors (Na⁺/Ca²⁺), it has a high potential for future practical applications as an environmentally sustainable alternative. It uses low-cost solid waste to produce an adsorbent to cope with emerging contaminants such as antibiotics.

Literature Review: Evaluation of Drug Removal Techniques in Municipal and Hospital Wastewater

There are several techniques for the removal of pharmaceuticals (drugs) from wastewater; however, strengths and weaknesses have been observed in their elimination processes that limit their applicability. Therefore, we aimed to evaluate the best techniques for the removal of pharmaceuticals from municipal and hospital wastewater. For this, a non-experimental, descriptive, qualitative-quantitative design was used, corresponding to a systematic review without meta-analysis. Based on established inclusion and exclusion criteria, 31 open-access articles were selected from the Scopus, ProQuest, EBSCOhost, and ScienceDirect databases. The results showed that high concentrations of analgesics such as naproxen (1.37 mg/L) and antibiotics such as norfloxacin (0.561 mg/L) are frequently found in wastewater and that techniques such as reverse osmosis, ozonation, and activated sludge have the best removal efficiency, achieving values of 99%. It was concluded that reverse osmosis is one of the most efficient techniques for eliminating ofloxacin, sulfamethoxazole, carbamazepine, and diclofenac from municipal wastewater, with removal rates ranging from 96 to 99.9%, while for hospital wastewater the activated sludge technique proved to be efficient, eliminating analgesics and antibiotics in the range of 41-99%.

Removal of Diverse and Abundant ARGs by MF-NF Process from Pig Manure and Digestate

Antimicrobial resistances are emerging as one main threat to worldwide human health and are expected to kill 10 million people by 2050. Intensive livestock husbandry, along with biogas digestate, are considered as one of the biggest ARG reservoirs. Despite major concerns, little information is available on the diversity and abundance of various ARGs in small to large scale pig farms and biogas digestate slurry in Germany, followed by their consequent removal using microfiltration (MF)-nanofiltration (NF) process. Here, we report the identification and quantification of 189 ARGs in raw manure and digestate samples, out of which 66 ARGs were shared among manures and 53 ARGs were shared among both manure and digestate samples. The highest reported total ARG copy numbers in a single manure sampling site was 1.15 × 10⁸ copies/100 µL. In addition, we found the absolute concentrations of 37 ARGs were above 10⁵ copies/100 μL. Filtration results showed that the highly concentrated ARGs (except aminoglycoside resistance ARGs) in feed presented high log retention value (LRV) from 3 to as high as 5 after the MF-NF process. Additionally, LRV below 2 was noticed where the initial absolute ARG concentrations were ≤10³ copies/100 μL. Therefore, ARG removal was found to be directly proportional to its initial concentration in the raw manure and in digestate samples. Consequently, some ARGs (tetH, strB) can still be found within the permeate of NF with up to 10⁴ copies/100 μL.

Nanofiltration as an Efficient Tertiary Wastewater Treatment: Elimination of Total Bacteria and Antibiotic Resistance Genes from the Discharged Effluent of a Full-Scale Wastewater Treatment Plant

Wastewater reuse for agricultural irrigation still raises important public health issues regarding its safety, due to the increasing presence of emerging contaminants, such as antibiotic resistant bacteria and genes, in the treated effluents. In this paper, the potential for a commercial Desal 5 DK nanofiltration membrane to be used as a tertiary treatment in the wastewater treatment plants for a more effective elimination of these pollutants from the produced effluents was assessed on laboratory scale, using a stainless steel cross-flow cell. The obtained results showed high concentrations of total bacteria and target carbapenem and (fluoro)quinolone resistance genes (blaKPC, blaOXA-48, blaNDM, blaIMP, blaVIM, qnrA, qnrB and qnrS) not only in the discharged, but also in the reused, effluent samples, which suggests that their use may not be entirely safe. Nevertheless, the applied nanofiltration treatment achieved removal rates superior to 98% for the total bacteria and 99.99% for all the target resistance genes present in both DNA and extracellular DNA fractions, with no significant differences for these microbiological parameters between the nanofiltered and the control tap water samples. Although additional studies are still needed to fully optimize the entire process, the use of nanofiltration membranes seems to be a promising solution to substantially increase the quality of the treated wastewater effluents.

A comprehensive review on recent advances toward sequestration of levofloxacin antibiotic from wastewater

Among various classes of antibiotics, fluoroquinolones, especially Levofloxacin, are being administered on a large scale for numerous purposes. Being highly stable to be completely metabolized, residual quantities of Levofloxacin get accumulated into the food chain proving a great global threat for aquatic as well as terrestrial ecosystems. Various removal techniques including both conventional and advanced methods have been reported for this purpose. This review is a novel attempt to make a critical analysis of the recent advances made exclusively toward the sequestration of Levofloxacin from wastewater through an extensive literature survey (2015-2021). Adsorption and advanced oxidation processes especially photocatalytic degradation are the most tested techniques in which assorted nanomaterials play a significant role. Several photocatalysts exhibited up to 100% degradation of LEV which makes photocatalytic degradation the best method among other tested methods. However, the degraded products need to be further monitored in terms of their toxicity. Biological degradation may prove to be the most environment-friendly with the least toxicity, unfortunately, not much research is reported in the field. With these key findings and knowledge gaps, authors suggest the scope of hybrid techniques, which have been experimented on other antibiotics. These can potentially minimize the disadvantages of the individual techniques concurrently improving the efficiency of LEV removal. Besides, techniques like column adsorption, membrane treatment, and ozonation, being least reported, reserve good perspectives for future research. With these implications, the review will certainly serve as a breakthrough for researchers working in this field to aid their future findings.

A High Flux Electrochemical Filtration System Based on Electrospun Carbon Nanofiber Membrane for Efficient Tetracycline Degradation

In this work, an electrochemical filter using an electrospun carbon nanofiber membrane (ECNFM) anode fabricated by electrospinning, stabilization and carbonization was developed for the removal of antibiotic tetracycline (TC). ECNFM with 2.5 wt% terephthalic acid (PTA) carbonized at 1000 °C (ECNFM-2.5%-1000) exhibited higher tensile stress (0.75 MPa) and porosity (92.8%), more graphitic structures and lower electron transfer resistance (23.52 Ω). Under the optimal condition of applied voltage 2.0 V, pH 6.1, 0.1 mol L−1 Na2SO4, initial TC concentration 10 ppm and membrane flux 425 LMH, the TC removal efficiency of the electrochemical filter of ECNFM-2.5%-1000 reached 99.8%, and no obvious performance loss was observed after 8 h of continuous operation. The pseudo-first-order reaction rate constant in flow-through mode was 2.28 min−1, which was 10.53 times higher than that in batch mode. Meanwhile, the energy demand for 90% TC removal was only 0.017 kWh m−3. TC could be converted to intermediates with lower developmental toxicity and mutagenicity via the loss of functional groups (-CONH2, -CH3, -OH, -N(CH3)2) and ring opening reaction, which was mainly achieved by direct anodic oxidation. This study highlights the potential of ECNFM-based electrochemical filtration for efficient and economical drinking water purification.

Overview of Membrane Science and Technology in Portugal

Membrane research in Portugal is aligned with global concerns and expectations for sustainable social development, thus progressively focusing on the use of natural resources and renewable energy. This review begins by addressing the pioneer work on membrane science and technology in Portugal by the research groups of Instituto Superior Técnico-Universidade de Lisboa (IST), NOVA School of Science and Technology-Universidade Nova de Lisboa (FCT NOVA) and Faculdade de Engenharia-Universidade do Porto (FEUP) aiming to provide an historical perspective on the topic. Then, an overview of the trends and challenges in membrane processes and materials, mostly in the last five years, involving Portuguese researchers, is presented as a contribution to a more sustainable water-energy-material-food nexus.

Advances and Applications of Hollow Fiber Nanofiltration Membranes: A Review

Hollow fiber nanofiltration (NF) membranes have gained increased attention in recent years, partly driven by the availability of alternatives to polyamide-based dense separation layers. Moreover, the global market for NF has been growing steadily in recent years and is expected to grow even faster. Compared to the traditional spiral-wound configuration, the hollow fiber geometry provides advantages such as low fouling tendencies and effective hydraulic cleaning possibilities. The alternatives to polyamide layers are typically chemically more stable and thus allow operation and cleaning at more extreme conditions. Therefore, these new NF membranes are of interest for use in a variety of applications. In this review, we provide an overview of the applications and emerging opportunities for these membranes. Next to municipal wastewater and drinking water processes, we have put special focus on industrial applications where hollow fiber NF membranes are employed under more strenuous conditions or used to recover specific resources or solutes.