1
|
Ozer NE, Sahin Z, Yikici C, Duyan S, Kilicarslan MA. Bacterial adhesion to composite resins produced by additive and subtractive manufacturing. Odontology 2024; 112:460-471. [PMID: 37819468 DOI: 10.1007/s10266-023-00862-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Accepted: 09/26/2023] [Indexed: 10/13/2023]
Abstract
The aim of this study was to evaluate the surface roughness and contact angle of composite resins produced by CAD/CAM milling and three-dimensional (3D) printing for permanent restorations as well as the adhesion of S. mutans and S. sanguinis bacteria to these composites. Three CAD/CAM milling composite resins (Vita Enamic-VE, Cerasmart-CE, Lava Ultimate-LU) and three 3D printing resins (Varseo Smile Crown plus-VSC, Saremco print Crowntech-SPC, Formlabs 3B Permanent crown-FLP) were selected. Twenty samples were prepared for each group. Using a contact profilometer, the surface roughness was determined, and an optical goniometer was used to quantify the contact angle. To evaluate the bacterial adhesion, composite specimens were immersed in mucin containing artificial saliva. All samples were incubated for 24 h at 37°C in 5% CO2. CFUs were determined by counting colonies after the incubation period. Surface roughness values of test samples were the highest in the Group VSC [0.46 (0.14) µm], whereas the lowest values were found in the Group LU [0.23 (0.05) µm]. There was no statistically significant difference between the groups in contact angle values (p > 0.05). The S. mutans adhesion extent on the Group SPC was statistically higher compared to all other materials with p < 0.05. For S. sanguinis, the lowest bacterial adhesion value was recorded in Group CE (3.00 × 104 CFU/ml) and statistically significant differences were found with Group VE and VSC (p < 0.05). Different digital manufacturing techniques and material compositions can affect the surface roughnesses of composite resins. All composite resin samples have hydrophobic characteristics. Microbial adhesion of the tested composite resins may be varied depending on the bacterial species. S. mutans showed much more adhesion to these materials than S. sanguinis.
Collapse
Affiliation(s)
- Nazire Esra Ozer
- Department of Prosthodontics, Faculty of Dentistry, Lokman Hekim University, Söğütözü. 2179 St., 06510, Çankaya, Ankara, Turkey.
| | - Zeynep Sahin
- Department of Prosthodontics, Faculty of Dentistry, Lokman Hekim University, Söğütözü. 2179 St., 06510, Çankaya, Ankara, Turkey
| | - Cansu Yikici
- Department of Restorative Dentistry, Faculty of Dentistry, Lokman Hekim University, Çankaya, Ankara, Turkey
| | - Serhat Duyan
- Department of Medical Microbiology, Department of Microbiology, University of Health Sciences, Gülhane Training and Research Hospital, Etlik, Ankara, Turkey
| | - Mehmet Ali Kilicarslan
- Department of Prosthodontics, Faculty of Dentistry, Ankara University, Yenimahalle, Ankara, Turkey
| |
Collapse
|
2
|
Liang X, Yu B, Ye L, Lin D, Zhang W, Zhong HJ, He J. Recent Advances in Quaternary Ammonium Monomers for Dental Applications. MATERIALS (BASEL, SWITZERLAND) 2024; 17:345. [PMID: 38255513 PMCID: PMC10820831 DOI: 10.3390/ma17020345] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/02/2023] [Revised: 12/30/2023] [Accepted: 01/08/2024] [Indexed: 01/24/2024]
Abstract
Resin-based dental materials have been one of the ideal choices among various materials in the treatment of dental caries. However, resin-based dental materials still have some drawbacks, such as the lack of inherent antibacterial activity. Extensive research has been conducted on the use of novel quaternary ammonium monomers (QAMs) to impart antibacterial activity to dental materials. This review provides a comprehensive overview of the recent advances in quaternary ammonium monomers (QAMs) for dental applications. The current progress and limitations of QAMs are discussed based on the evolution of their structures. The functional diversification and enhancement of QAMs are presented. QAMs have the potential to provide long-term antibacterial activity in dental resin composites, thereby prolonging their service life. However, there is a need to balance antibacterial performance with other material properties and the potential impact on the oral microbiome and general health. Finally, the necessity for further scientific progress in the development of novel quaternary ammonium monomers and the optimization of dental resin formulations is emphasized.
Collapse
Affiliation(s)
- Xiaoxu Liang
- Foundation Department, Guangzhou Maritime University, Guangzhou 510725, China;
| | - Biao Yu
- School of Chemistry and Chemical Engineering, Lingnan Normal University, Zhanjiang 524048, China;
| | - Liuqi Ye
- International Cooperative Laboratory of Traditional Chinese Medicine Modernization and Innovative Drug Development of Chinese Ministry of Education (MOE), College of Pharmacy, Jinan University, Guangzhou 510632, China; (L.Y.); (D.L.); (W.Z.)
| | - Danlei Lin
- International Cooperative Laboratory of Traditional Chinese Medicine Modernization and Innovative Drug Development of Chinese Ministry of Education (MOE), College of Pharmacy, Jinan University, Guangzhou 510632, China; (L.Y.); (D.L.); (W.Z.)
| | - Wen Zhang
- International Cooperative Laboratory of Traditional Chinese Medicine Modernization and Innovative Drug Development of Chinese Ministry of Education (MOE), College of Pharmacy, Jinan University, Guangzhou 510632, China; (L.Y.); (D.L.); (W.Z.)
| | - Hai-Jing Zhong
- International Cooperative Laboratory of Traditional Chinese Medicine Modernization and Innovative Drug Development of Chinese Ministry of Education (MOE), College of Pharmacy, Jinan University, Guangzhou 510632, China; (L.Y.); (D.L.); (W.Z.)
| | - Jingwei He
- School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641, China
| |
Collapse
|
3
|
Paul M, Pramanik SD, Sahoo RN, Dey YN, Nayak AK. Dental delivery systems of antimicrobial drugs using chitosan, alginate, dextran, cellulose and other polysaccharides: A review. Int J Biol Macromol 2023; 247:125808. [PMID: 37460072 DOI: 10.1016/j.ijbiomac.2023.125808] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2023] [Revised: 06/20/2023] [Accepted: 07/01/2023] [Indexed: 07/24/2023]
Abstract
Dental caries, periodontal disease, and endodontic disease are major public health concerns worldwide due to their impact on individuals' quality of life. The present problem of dental disorders is the removal of the infection caused by numerous microbes, particularly, bacteria (both aerobes and anaerobes). The most effective method for treating and managing dental diseases appears to be the use of antibiotics or other antimicrobials, which are incorporated in some drug delivery systems. However, due to their insufficient bioavailability, poor availability for gastrointestinal absorption, and pharmacokinetics after administration via the oral route, many pharmaceutical medicines or natural bioactive substances have limited efficacy. During past few decades, a range of polysaccharide-based systems have been widely investigated for dental dug delivery. The polysaccharide-based carrier materials made of chitosan, alginate, dextran, cellulose and other polysaccharides have recently been spotlighted on the recent advancements in preventing, treating and managing dental diseases. The objective of the current review article is to present a brief comprehensive overview of the recent advancements in polysaccharide-based dental drug delivery systems for the delivery of different antimicrobial drugs.
Collapse
Affiliation(s)
- Mousumi Paul
- Department of Pharmacology, Dr. B.C. Roy College of Pharmacy and Allied Health Sciences, Durgapur 713206, West Bengal, India
| | - Siddhartha Das Pramanik
- Department of Biosciences and Bioengineering, Indian Institute Technology-Roorkee, Roorkee 247667, Uttarakhand, India
| | - Rudra Narayan Sahoo
- Department of Pharmaceutics, School of Pharmaceutical Sciences, Siksha 'O' Anusandhan (Deemed to be University), Bhubaneswar 751003, Odisha, India
| | - Yadu Nandan Dey
- Department of Pharmacology, Dr. B.C. Roy College of Pharmacy and Allied Health Sciences, Durgapur 713206, West Bengal, India.
| | - Amit Kumar Nayak
- Department of Pharmaceutics, School of Pharmaceutical Sciences, Siksha 'O' Anusandhan (Deemed to be University), Bhubaneswar 751003, Odisha, India.
| |
Collapse
|
4
|
Hollanders ACC, Kuper NK, Bronkhorst EM, Laske M, Huysmans MCDNJM. Effectiveness of adhesive containing MDPB: A practice-based clinical trial. Dent Mater 2023; 39:756. [PMID: 37394389 DOI: 10.1016/j.dental.2023.06.011] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2022] [Revised: 06/05/2023] [Accepted: 06/14/2023] [Indexed: 07/04/2023]
Abstract
OBJECTIVES This prospective practice-based trial assessed the longevity of composite restorations made with an adhesive containing an antibacterial monomer compared to a conventional adhesive. METHODS 9 general practices in the Netherlands were provided with two composite resin adhesives, each for a period of 9 months. Adhesive P contained the quaternary ammonium salt MDPB, and Adhesive S was a control. Patient's age and caries risk, as well as tooth type/number, reason for restoration placement, used restorative material and adhesive, and restored surfaces were recorded. All interventions carried out on these teeth in the 6 years after restoration were extracted from the electronic patient records, along with their date, type, reason, and surfaces. Two dependent variables were defined: general failure, and failure due to secondary caries. All data handling and multiple Cox regression analysis were carried out in R 4.0.5. RESULTS 11 dentists from 7 practices made 10,151 restorations over a period of two years in 5102 patients. 4591 restorations were made with adhesive P, whereas 5560 were made with adhesive S. The observation period was up to 6.29 years, median observation time was 3.74 years. Cox regression showed no significant difference between the two adhesive materials when corrected for age, tooth type and caries risk, for general failure nor failure due to caries. SIGNIFICANCE No difference in restoration survival could be shown between composite restorations made using an adhesive containing MDPB and control. Restorations made with the adhesive containing MDPB also did not fail more or less frequently due to secondary caries. This trial is registered on clinicaltrials.gov with identifier NCT05118100.
Collapse
Affiliation(s)
| | - N K Kuper
- Department of Dentistry, Radboudumc, Nijmegen, Netherlands
| | - E M Bronkhorst
- Department of Dentistry, Radboudumc, Nijmegen, Netherlands
| | - M Laske
- Department of Dentistry, Radboudumc, Nijmegen, Netherlands
| | | |
Collapse
|
5
|
Chrószcz-Porębska M, Kazek-Kęsik A, Chladek G, Barszczewska-Rybarek I. Novel mechanically strong and antibacterial dimethacrylate copolymers based on quaternary ammonium urethane-dimethacrylate analogues. Dent Mater 2023; 39:659-664. [PMID: 37217427 DOI: 10.1016/j.dental.2023.05.008] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/19/2022] [Accepted: 05/12/2023] [Indexed: 05/24/2023]
Abstract
OBJECTIVES This study assumed that the quaternary ammonium urethane-dimethacrylate derivative (QAUDMA-m, where m was 8, 10, 12, 14, 16, 18, and corresponded to the number of carbon atoms in the N-alkyl substituent) can be used to achieve copolymers with high mechanical performance and antibacterial activity. METHODS Photocured copolymers of bisphenol A glycerolate dimethacrylate (Bis-GMA) 40 wt%, QAUDMA-m 40 wt%, and triethylene glycol dimethacrylate (TEGDMA) 20 wt% (BG:QAm:TEG) were characterized by the degree of conversion (DC), flexural strength (FS), flexural modulus (E), hardness (HB), and antibacterial properties (the number of bacteria colonies adhered to copolymer surfaces and inhibition zone diameter (IZD)) against Staphylococcus aureus and Escherichia coli. Reference copolymers of Bis-GMA, urethane-dimethacrylate monomer (UDMA), and TEGDMA (BG:TEG and BG:UD:TEG) were also characterized. RESULTS The DC of BG:QAm:TEGs ranged from 0.59 to 0.68, HB from 83.84 to 153.91 MPa, FS from 50.81 to 74.47 MPa, and E from 1986.74 to 3716.68 MPa. The number of S. aureus and E. coli bacteria adhered to BG:QAm:TEG surfaces was from 0 (no bacteria observed) to 6.47 and 4.99 log(CFU/mL), respectively. IZD was from 10 and 5 mm (no inhibition zone) to 23 and 21 mm, respectively. Three copolymers: BG:QA8:TEG, BG:QA10:TEG, and BG:QA12:TEG had similar or better mechanical properties than the reference copolymers, but unlike them, they showed high antibacterial activity against both bacteria strains. SIGNIFICANCE The obtained copolymers can offer a good, mechanically efficient, bioactive alternative to BG:TEG and BG:UD:TEG copolymers. The use of such materials can help to make progress in dental health care.
Collapse
Affiliation(s)
- Marta Chrószcz-Porębska
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9 Str., 44-100 Gliwice, Poland
| | - Alicja Kazek-Kęsik
- Department of Inorganic Chemistry, Analytical Chemistry and Electrochemistry, Faculty of Chemistry, Silesian University of Technology, Krzywoustego 6 Str., 44-100 Gliwice, Poland; Biotechnology Centre, Silesian University of Technology, Krzywoustego 8 Str., 44-100 Gliwice, Poland
| | - Grzegorz Chladek
- Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18a Str., 44-100 Gliwice, Poland
| | - Izabela Barszczewska-Rybarek
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9 Str., 44-100 Gliwice, Poland.
| |
Collapse
|
6
|
Chrószcz-Porębska MW, Barszczewska-Rybarek IM, Kazek-Kęsik A, Ślęzak-Prochazka I. Cytotoxicity and Microbiological Properties of Copolymers Comprising Quaternary Ammonium Urethane-Dimethacrylates with Bisphenol A Glycerolate Dimethacrylate and Triethylene Glycol Dimethacrylate. MATERIALS (BASEL, SWITZERLAND) 2023; 16:ma16103855. [PMID: 37241482 DOI: 10.3390/ma16103855] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/12/2023] [Revised: 05/15/2023] [Accepted: 05/18/2023] [Indexed: 05/28/2023]
Abstract
Using dental composite restorative materials with a copolymeric matrix chemically modified towards bioactive properties can help fight secondary caries. In this study, copolymers of 40 wt.% bisphenol A glycerolate dimethacrylate, 40 wt.% quaternary ammonium urethane-dimethacrylates (QAUDMA-m, where m represents 8, 10, 12, 14, 16 and 18 carbon atoms in the N-alkyl substituent), and 20 wt.% triethylene glycol dimethacrylate (BG:QAm:TEGs) were tested for (i) cytotoxicity on the L929 mouse fibroblast cell line; (ii) fungal adhesion, fungal growth inhibition zone, and fungicidal activity against C. albicans; and (iii) bactericidal activity against S. aureus and E. coli. BG:QAm:TEGs had no cytotoxic effects on L929 mouse fibroblasts because the reduction of cell viability was less than 30% compared to the control. BG:QAm:TEGs also showed antifungal activity. The number of fungal colonies on their surfaces depended on the water contact angle (WCA). The higher the WCA, the greater the scale of fungal adhesion. The fungal growth inhibition zone depended on the concentration of QA groups (xQA). The lower the xQA, the lower the inhibition zone. In addition, 25 mg/mL BG:QAm:TEGs suspensions in culture media showed fungicidal and bactericidal effects. In conclusion, BG:QAm:TEGs can be recognized as antimicrobial biomaterials with negligible biological patient risk.
Collapse
Affiliation(s)
- Marta W Chrószcz-Porębska
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9 Str., 44-100 Gliwice, Poland
| | - Izabela M Barszczewska-Rybarek
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9 Str., 44-100 Gliwice, Poland
| | - Alicja Kazek-Kęsik
- Department of Inorganic Chemistry, Analytical Chemistry and Electrochemistry, Faculty of Chemistry, Silesian University of Technology, Krzywoustego 6 Str., 44-100 Gliwice, Poland
- Biotechnology Centre, Silesian University of Technology, Krzywoustego 8 Str., 44-100 Gliwice, Poland
| | - Izabella Ślęzak-Prochazka
- Biotechnology Centre, Silesian University of Technology, Krzywoustego 8 Str., 44-100 Gliwice, Poland
- Department of Systems Biology and Engineering, Faculty of Automatic Control, Electronics and Computer Science, Silesian University of Technology, Akademicka 16 Str., 44-100 Gliwice, Poland
| |
Collapse
|
7
|
Synthesis, Characterization and Application of Novel Cationic Surfactants as Antibacterial Agents. SEPARATIONS 2023. [DOI: 10.3390/separations10020097] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023] Open
Abstract
It is of great necessity to develop new antimicrobial agents to overcome the accelerated increment in drug-resistant bacteria. The main aim of this work is to manufacture two cationic surfactants, QHETA-9 and QHETA-14, based on quaternary hexamethylenetetramine with long alkyl chains (C-9 and C-14) by simple one-step alkylation reaction. These surfactants were characterized by analytical and statistical data, including FTIR, 1H NMR, 13C NMR and DLS. The antibacterial activities of QHETA-9 and QHETA-14 against some pathogenic bacterial strains were tested using agar disk diffusion method. The results exhibited that QHETA-14 has higher antibacterial activity than that of QHETA-9. It displayed inhibitory zone values for Staphylococcus aureus, methicillin-resistant Staphylococcus aureus (MRSA) and Enterococcus faecalis, as Gram-positive bacteria, of 22.7, 21.5 and 25.9 mm, respectively, at 200 μg/disk. Meanwhile, it recorded inhibition zone values of 17.5, 25.2 and 23.8 mm for Escherichia coli, Agrobacterium tumefaciens and Erwinia carotovora, respectively, at 200 μg/disk. As a result, the current investigation verified that the antibacterial properties of QHETA-14 were greater than those of QHETA-9 due to the increase in the length of the alkyl chain. It is clear that QHETA-14 has the potential to be used as an antibacterial agent against bacteria that cause nosocomial infections and food poisoning diseases.
Collapse
|
8
|
Chrószcz-Porębska MW, Barszczewska-Rybarek IM, Chladek G. Physicochemical Properties of Novel Copolymers of Quaternary Ammonium UDMA Analogues, Bis-GMA, and TEGDMA. Int J Mol Sci 2023; 24:ijms24021400. [PMID: 36674915 PMCID: PMC9865015 DOI: 10.3390/ijms24021400] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/02/2022] [Revised: 01/03/2023] [Accepted: 01/09/2023] [Indexed: 01/13/2023] Open
Abstract
This study aimed to elucidate the physicochemical properties of copolymers comprising 40 wt.% bisphenol A glycerolate dimethacrylate (Bis-GMA), 40 wt.% quaternary ammonium urethane-dimethacrylate analogues (QAUDMA-m, where m corresponds to the number of carbon atoms in the N-alkyl substituent), and 20 wt.% triethylene glycol dimethacrylate (TEGDMA) copolymers (BG:QAm:TEGs). The BG:QAm:TEG liquid monomer compositions and reference compositions (40 wt.% Bis-GMA, 40 wt.% urethane-dimethacrylate (UDMA), 20 wt.% TEGDMA (BG:UD:TEG) and 60 wt.% Bis-GMA, 40 wt.% TEGDMA (BG:TEG)) were characterized in terms of their refractive index (RI) and monomer glass transition temperature (Tgm) and then photocured. The resulting copolymers were characterized in terms of the polymer glass transition temperature (Tgp), experimental polymerization shrinkage (Se), water contact angle (WCA), water sorption (WS), and water solubility (SL). The prepared BG:QAm:TEG liquid monomer compositions had RI in the range 1.4997-1.5129, and Tgm in the range -52.22 to -42.12 °C. The BG:QAm:TEG copolymers had Tgp ranging from 42.21 to 50.81 °C, Se ranging from 5.08 to 6.40%, WCA ranging from 81.41 to 99.53°, WS ranging from 25.94 to 68.27 µg/mm3, and SL ranging from 5.15 to 5.58 µg/mm3. Almost all of the developed BG:QAm:TEGs fulfilled the requirements for dental materials (except BG:QA8:TEG and BG:QA10:TEG, whose WS values exceeded the 40 µg/mm3 limit).
Collapse
Affiliation(s)
- Marta W. Chrószcz-Porębska
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9 Str., 44-100 Gliwice, Poland
| | - Izabela M. Barszczewska-Rybarek
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9 Str., 44-100 Gliwice, Poland
- Correspondence:
| | - Grzegorz Chladek
- Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A Str., 44-100 Gliwice, Poland
| |
Collapse
|
9
|
YU W, REN C, ZHANG N, CAO L, WEIR MD, YANG K, XU HHK, BAI Y. Dual function of anti-biofilm and modulating biofilm equilibrium of orthodontic cement containing quaternary ammonium salt. Dent Mater J 2023; 42:149-157. [PMID: 36464290 DOI: 10.4012/dmj.2022-142] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/04/2022]
Abstract
The objectives of this study were to incorporate dimethylaminohexadecyl methacrylate (DMAHDM) into resin-modified glass ionomer cement (RMGI) to develop a novel orthodontic cement which endowed RMGI with strong antibacterial ability and investigated its modulation biofilm equilibrium from cariogenic state to non-cariogenic state for the first time. Cariogenic Streptococcus mutans (S. mutans), and non-cariogenic Streptococcus sanguinis (S. sanguinis) and Streptococcus gordonii (S. gordonii) were selected to form a tri-species biofilm model. RMGI incorporated with different mass fraction of DMAHDM was examined: biofilm colony-forming units, metabolic activity, live/dead staining, lactic acid and exopolysaccharides productions. TaqMan real-time polymerase chain reaction was used to determine changes of biofilm species compositions. The results showed RMGI containing 3% DMAHDM achieved strong antibacterial ability and suppressed the cariogenic species in biofilm, modulating biofilm equilibrium from cariogenic state to non-cariogenic state tendency. The novel bioactive cement containing DMAHDM is promising in fixed orthodontic treatments and protecting tooth enamel.
Collapse
Affiliation(s)
- Wenqi YU
- Department of Orthodontics, School of Stomatology, Capital Medical University
| | - Chaochao REN
- Department of Orthodontics, School of Stomatology, Capital Medical University
| | - Ning ZHANG
- Department of Orthodontics, School of Stomatology, Capital Medical University
| | - Li CAO
- Department of Orthodontics, School of Stomatology, Capital Medical University
| | - Michael D. WEIR
- Biomaterials and Tissue Engineering Division, Department of Advanced Oral Science and Therapeutics
| | - Kai YANG
- Department of Orthodontics, School of Stomatology, Capital Medical University
| | - Hockin H. K. XU
- Biomaterials and Tissue Engineering Division, Department of Advanced Oral Science and Therapeutics
| | - Yuxing BAI
- Department of Orthodontics, School of Stomatology, Capital Medical University
| |
Collapse
|
10
|
He J, Lassila L, Garoushi S, Vallittu P. Tailoring the monomers to overcome the shortcomings of current dental resin composites - review. Biomater Investig Dent 2023; 10:2191621. [PMID: 37090482 PMCID: PMC10120559 DOI: 10.1080/26415275.2023.2191621] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/25/2023] Open
Abstract
Dental resin composites (DRCs) have become the first choice among different restorative materials for direct anterior and posterior restorations in the clinic. Though the properties of DRCs have been improved greatly in recent years, they still have several shortcomings, such as volumetric shrinkage and shrinkage stress, biofilm development, lack of radio-opacity for some specific DRCs, and estrogenicity, which need to be overcome. The resin matrix, composed of different monomers, constitutes the continuous phase and determine the performance of DRCs. Thus, the chemical structure of the monomers plays an important role in modifying the properties of DRCs. Numerous researchers have taken to design and develop novel monomers with specific functions for the purpose of fulfilling the needs in dentistry. In this review, the development of monomers in DRCs were highlighted, especially focusing on strategies aimed at reducing volumetric shrinkage and shrinkage stress, endowing bacteriocidal and antibacterial adhesion activities as well as protein-repelling activity, increasing radio-opacity, and replacing Bis-GMA. The influences of these novel monomers on the properties of DRCs were also discussed.
Collapse
Affiliation(s)
- Jingwei He
- College of Materials Science and Engineering, South China University of Technology, Guangzhou, China
- Department of Biomaterials Science and Turku Clinical Biomaterials Center-TCBC, Institute of Dentistry, University of Turku, Turku, Finland
- CONTACT Jingwei He College of Materials Science and Engineering, South China University of Technology, Guangzhou, China
| | - Lippo Lassila
- Department of Biomaterials Science and Turku Clinical Biomaterials Center-TCBC, Institute of Dentistry, University of Turku, Turku, Finland
| | - Sufyan Garoushi
- Department of Biomaterials Science and Turku Clinical Biomaterials Center-TCBC, Institute of Dentistry, University of Turku, Turku, Finland
| | - Pekka Vallittu
- Department of Biomaterials Science and Turku Clinical Biomaterials Center-TCBC, Institute of Dentistry, University of Turku, Turku, Finland
- Wellbeing Services County of South-West Finland, Turku, Finland
| |
Collapse
|
11
|
He X, Ye L, He R, He J, Ouyang S, Zhang J. Antibacterial dental resin composites (DRCs) with synthesized bis-quaternary ammonium monomethacrylates as antibacterial agents. J Mech Behav Biomed Mater 2022; 135:105487. [PMID: 36179614 DOI: 10.1016/j.jmbbm.2022.105487] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Revised: 09/20/2022] [Accepted: 09/21/2022] [Indexed: 11/28/2022]
Abstract
Three bi-quaternary ammonium methacrylates (biQAMA-12, biQAMA-14, and biQAMA-16) with different alkyl chain length were synthesized with the purpose of endowing dental resin composites (DRCs) with antibacterial activity without sacrificing physicochemical properties of DRCs. All of biQAMAs were confirmed by 1H-NMR spectra and incorporated into Bis-GMA/TEGDMA (60 wt/40 wt) resin matrix with a mass fraction of 5 wt% as antibacterial agent. The obtained resin matrixes were mixed with commercial silaned glass fillers at a mass ratio of 30 wt/70 wt to prepare antibacterial DRCs. The double bond conversion (DC), antibacterial activity against S. mutans., surface charge density, water contact angle, water sorption (WS) and solubility (SL), mechanical properties, and cytotoxicity of biQAMAs containing DRCs were investigated. The DRC without biQAMAs was used as control. The results showed that all biQAMAs containing DRCs had antibacterial rate higher than 90%, and DRC with biQAMA-12 had the highest antibacterial rate due to its highest surface charge density. Adding 5 wt% of biQAMAs would not bring out negative effect on physicochemical properties of DRCs, except for increasing WS, but the resultant WS still met the ISO requirement on WS of restorative materials. Both biQAMA-14 and biQAMA-16 containing DRCs showed higher cytotoxicity than control, thus biQAMA-12 was considered as the optimal antibacterial agent in this research.
Collapse
Affiliation(s)
- Xiaoling He
- Key Laboratory of 3D Printing Technology in Stomatology, The First Dongguan Affiliated Hospital, Guangdong Medical University, Dongguan, 523710, Guangdong, China
| | - Linyan Ye
- Key Laboratory of 3D Printing Technology in Stomatology, The First Dongguan Affiliated Hospital, Guangdong Medical University, Dongguan, 523710, Guangdong, China
| | - Rouye He
- Key Laboratory of 3D Printing Technology in Stomatology, The First Dongguan Affiliated Hospital, Guangdong Medical University, Dongguan, 523710, Guangdong, China
| | - Jingwei He
- College of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, Guangdong, China.
| | - Suidong Ouyang
- Guangdong Provincial Key Laboratory of Medical Molecular Diagnostics, Guangdong Medical University, Dongguan, 523710, Guangdong, China
| | - Jingying Zhang
- Key Laboratory of 3D Printing Technology in Stomatology, The First Dongguan Affiliated Hospital, Guangdong Medical University, Dongguan, 523710, Guangdong, China.
| |
Collapse
|
12
|
Chrószcz-Porębska MW, Barszczewska-Rybarek IM, Chladek G. Characterization of the Mechanical Properties, Water Sorption, and Solubility of Antibacterial Copolymers of Quaternary Ammonium Urethane-Dimethacrylates and Triethylene Glycol Dimethacrylate. MATERIALS (BASEL, SWITZERLAND) 2022; 15:ma15165530. [PMID: 36013665 PMCID: PMC9414361 DOI: 10.3390/ma15165530] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/07/2022] [Revised: 07/27/2022] [Accepted: 08/10/2022] [Indexed: 06/01/2023]
Abstract
The use of dental composites based on dimethacrylates that have quaternary ammonium groups is a promising solution in the field of antibacterial restorative materials. This study aimed to investigate the mechanical properties and behaviors in aqueous environments of a series of six copolymers (QA:TEG) comprising 60 wt.% quaternary ammonium urethane-dimethacrylate (QAUDMA) and 40 wt.% triethylene glycol dimethacrylate (TEGDMA); these copolymers are analogous to a common dental copolymer (BG:TEG), which comprises 60 wt.% bisphenol A glycerolate dimethacrylate (Bis-GMA) and 40 wt.% TEGDMA. Hardness (HB), flexural strength (FS), flexural modulus (E), water sorption (WS), and water solubility (SL) were assessed for this purpose. The pilot study of these copolymers showed that they have high antibacterial activity and good physicochemical properties. This paper revealed that QA:TEGs cannot replace BG:TEG due to their insufficient mechanical properties and poor behavior in water. However, the results can help to explain how QAUDMA-based materials work, and how their composition should be manipulated to produce the best performance. It was found that the longer the N-alkyl chain, the lower the HB, WS, and SL. The FS and E increased with the lengthening of the N-alkyl chain from eight to ten carbon atoms. Its further extension, to eighteen carbon atoms, caused a decrease in those parameters.
Collapse
Affiliation(s)
- Marta W. Chrószcz-Porębska
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9 Str., 44-100 Gliwice, Poland
| | - Izabela M. Barszczewska-Rybarek
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9 Str., 44-100 Gliwice, Poland
| | - Grzegorz Chladek
- Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 18a Konarskiego Str., 41-100 Gliwice, Poland
| |
Collapse
|
13
|
Rao S, B.T N, Preman NK, Johnson RP, Ginjupalli K, P. P, Prabhu A, Das R, K J, Pai V. Synthesis, characterization, and evaluation of quaternary ammonium-based polymerizable antimicrobial monomers for prosthodontic applications. Heliyon 2022; 8:e10374. [PMID: 36090206 PMCID: PMC9449575 DOI: 10.1016/j.heliyon.2022.e10374] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/25/2022] [Revised: 05/19/2022] [Accepted: 08/15/2022] [Indexed: 11/17/2022] Open
Abstract
The present study aims to synthesize and characterize two quaternary ammonium (QAM) based monomers such as - dimethyl-hexadecyl-methacryloxyethyl-ammonium iodide (DHMAI) and 2-dimethyl-2-dodecyl-1-methacryloxyethyl ammonium iodine (DDMAI) and assess their cytotoxicity and antimicrobial properties. The study also aims to incorporate the optimized concentration of these monomers as copolymerizing monomers into conventional Polymethyl methacrylate (PMMA) denture base resin and evaluate their suitability for prosthetic applications. DHMAI and DDMAI monomers were synthesized through a Menschutkin reaction and their chemical structure was characterized using FT-IR and 1H-NMR spectroscopy. Cytotoxicity was determined using Methyl Thiazolyl Tetrazolium (MTT) assay whereas antimicrobial activity was assessed using the agar-disc diffusion method. Subsequently, optimized concentrations of DHMAI or DDMAI, based on the cytotoxicity results, were added to conventional PMMA resin. Antimicrobial activity, cytotoxicity, surface hardness, and water sorption of PMMA denture base rein incorporated with DHMAI or DDMAI were evaluated. FT-IR and 1H-NMR results confirmed the structure of monomers and copolymerization of DHMAI and DDMAI with PMMA resin. DHMAI and DDMAI monomers were found to be cytocompatible with mouse fibroblast cells up to a concentration of 5 μg/mL and 20 μg/mL respectively. In addition, incorporation of DHMAI or DDMAI at 5 μg/mL and 20 μg/mL respectively into PMMA denture base material did not affect their cytocompatibility. PMMA denture base resin incorporated with DHMAI or DDMAI significantly reduced the adhesion of microbes. Further, an increase in the surface hardness and a reduction in the water sorption was observed. Hence DHMAI and DDMAI can be considered as potential candidates for imparting antimicrobial activity to polymeric denture base materials.
Collapse
|
14
|
Chrószcz MW, Barszczewska-Rybarek IM, Kazek-Kęsik A. Novel Antibacterial Copolymers Based on Quaternary Ammonium Urethane-Dimethacrylate Analogues and Triethylene Glycol Dimethacrylate. Int J Mol Sci 2022; 23:ijms23094954. [PMID: 35563344 PMCID: PMC9103508 DOI: 10.3390/ijms23094954] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/07/2022] [Revised: 04/26/2022] [Accepted: 04/28/2022] [Indexed: 02/01/2023] Open
Abstract
The growing scale of secondary caries and occurrence of antibiotic-resistant bacterial strains require the development of antibacterial dental composites. It can be achieved by the chemical introduction of quaternary ammonium dimethacrylates into dental composites. In this study, physicochemical and antibacterial properties of six novel copolymers consisting of 60 wt. % quaternary ammonium urethane-dimethacrylate analogues (QAUDMA) and 40 wt. % triethylene glycol dimethacrylate (TEGDMA) were investigated. Uncured compositions had suitable refractive index (RI), density (dm), and glass transition temperature (Tgm). Copolymers had low polymerization shrinkage (S), high degree of conversion (DC) and high glass transition temperature (Tgp). They also showed high antibacterial effectiveness against S. aureus and E. coli bacterial strains. It was manifested by the reduction in cell proliferation, decrease in the number of bacteria adhered on their surfaces, and presence of growth inhibition zones. It can be concluded that the copolymerization of bioactive QAUDMAs with TEGDMA provided copolymers with high antibacterial activity and rewarding physicochemical properties.
Collapse
Affiliation(s)
- Marta W. Chrószcz
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9 Str., 44-100 Gliwice, Poland;
- Correspondence: ; Tel.: +48-32-237-1793
| | - Izabela M. Barszczewska-Rybarek
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, Strzody 9 Str., 44-100 Gliwice, Poland;
| | - Alicja Kazek-Kęsik
- Department of Inorganic Chemistry, Analytical Chemistry and Electrochemistry, Faculty of Chemistry, Silesian University of Technology, Krzywoustego 6 Str., 44-100 Gliwice, Poland;
- Biotechnology Centre, Silesian University of Technology, Krzywoustego 8 Str., 44-100 Gliwice, Poland
| |
Collapse
|
15
|
Fu W, Liu Q, Wang L, Huang X, Su Z, Huang Z, He J. Synthesis of polymerizable quaternary thiazole salts and their application as antibacterial agents for dental resin. J Mech Behav Biomed Mater 2022; 130:105183. [DOI: 10.1016/j.jmbbm.2022.105183] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/16/2022] [Revised: 03/11/2022] [Accepted: 03/13/2022] [Indexed: 12/24/2022]
|
16
|
Zhou X, He J, Xiong S, Zhou F, Xiang H, Liu F. Preparation and properties of antibacterial styrene‐acrylic emulsion based on bis‐quaternary ammonium salt‐containing mono‐methacrylates as polymerizable antibacterial agents. POLYM ADVAN TECHNOL 2021. [DOI: 10.1002/pat.5597] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Affiliation(s)
- Xiaopei Zhou
- School of Materials Science and Engineering South China University of Technology Guangzhou China
- Key Lab of Guangdong Province for High Properties and Functional Macromolecular Materials South China University of Technology Guangzhou China
| | - Jingwei He
- School of Materials Science and Engineering South China University of Technology Guangzhou China
- Key Lab of Guangdong Province for High Properties and Functional Macromolecular Materials South China University of Technology Guangzhou China
| | | | - Furong Zhou
- Guangzhou Nippon Paint Co., Ltd Guangzhou China
| | - Hui Xiang
- Guangzhou Nippon Paint Co., Ltd Guangzhou China
| | - Fang Liu
- School of Materials Science and Engineering South China University of Technology Guangzhou China
- Key Lab of Guangdong Province for High Properties and Functional Macromolecular Materials South China University of Technology Guangzhou China
| |
Collapse
|
17
|
Rios-Madrigal AM, Orea-Vega DC, Vega-González M, Espinosa-Cristóbal LF, Arenas-Arrocena MC, Castro-Ruiz JE, Correa-Prado R, Domínguez-Pérez RA. Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites. J Appl Biomater Funct Mater 2021; 19:22808000211065260. [PMID: 34915756 DOI: 10.1177/22808000211065260] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022] Open
Abstract
OBJECTIVE Dental caries is the most prevalent disease globally, and Streptococcus mutans (S. mutans) is a common associated oral bacteria. Additionally, S. mutans possess esterase activity capable of degrading resin composites (RC). However, the effect of degradation on the physical-mechanical properties of the RC has not been extensively studied. We evaluated the flexure strength (FS), the diametral tensile strength (DTS), the modulus of elasticity (ME), and the microhardness of three contemporary RC to establish if S. mutans could affect them. METHODS One hundred thirty-eight bar-shaped and 276 disc-shaped specimens were fabricated with Enamel Plus HRi, IPS Empress Direct, and Clearfil AP-X, and physical-mechanical testing was done after been incubated during 30 and 60 days in culture media with or without S. mutans. Also, a scanning electron microscope was used to identify surface changes. RESULTS None of the tested RC were affected in their mechanical properties (FS, ME, and DTS). However, Clearfil AP-X and Enamel Plus HRI showed eroded surfaces and a decreased microhardness after 30 and 60 days S. mutans incubation. IPS Empress Direct presented the lowest values in all the tests, but its physical-mechanical features and surface were not affected by bacteria's exposure. CONCLUSIONS Exposure to S. mutans could affect some contemporary RC; however, the effect seems superficial since its mechanical features were not affected.
Collapse
Affiliation(s)
| | - Dulce Carolina Orea-Vega
- Prostodontic Specialization Program, Facultad de Medicina, Universidad Autónoma de Querétaro, Santiago de Querétaro, México
| | - Marina Vega-González
- Centro de Geociencias, Universidad Nacional Autónoma de México, Campus Juriquilla, Santiago de Querétaro, México
| | - León Francisco Espinosa-Cristóbal
- Master Program in Dental Sciences, Stomatology Department, Institute of Biomedical Sciences, Autonomous University of Juarez, Ciudad Juárez, México
| | - Ma Concepción Arenas-Arrocena
- Escuela Nacional de Estudios Superiores, Unidad León, Licenciatura en Odontología, Universidad Nacional Autónoma de México, León Guanajuato, México
| | - Jesus Eduardo Castro-Ruiz
- Prostodontic Specialization Program, Facultad de Medicina, Universidad Autónoma de Querétaro, Santiago de Querétaro, México
| | - Rodrigo Correa-Prado
- Prostodontic Specialization Program, Facultad de Medicina, Universidad Autónoma de Querétaro, Santiago de Querétaro, México
| | - Rubén Abraham Domínguez-Pérez
- Prostodontic Specialization Program, Facultad de Medicina, Universidad Autónoma de Querétaro, Santiago de Querétaro, México.,Laboratory of Multidisciplinary Dentistry Research, Facultad de Medicina, Universidad Autónoma de Querétaro, Santiago de Querétaro, México
| |
Collapse
|
18
|
Duarte de Oliveira FJ, Ferreira da Silva Filho PS, Fernandes Costa MJ, Rabelo Caldas MRG, Dutra Borges BC, Gadelha de Araújo DF. A comprehensive review of the antibacterial activity of dimethylaminohexadecyl methacrylate (DMAHDM) and its influence on mechanical properties of resin-based dental materials. JAPANESE DENTAL SCIENCE REVIEW 2021; 57:60-70. [PMID: 33995712 PMCID: PMC8102164 DOI: 10.1016/j.jdsr.2021.03.003] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/06/2020] [Revised: 03/04/2021] [Accepted: 03/21/2021] [Indexed: 02/08/2023] Open
Abstract
The repetitive restorative cycle should be avoided, aiming at the smallest number of restorations' replacements to ensure greater tooth longevity. Antibacterial materials associated with the control of caries etiological factors can help improve restoration's durability. This review aimed to analyze the results of in vitro studies that added Dimethylaminohexadecyl methacrylate (DMAHDM), an antibacterial monomer, to restorative materials. The PubMed, SCOPUS, Web of Science, and Biblioteca Virtual em Saúde databases were screened for studies published between 2015 and 2020. After full-text reading, 24 articles were included in the final sample. DMAHDM has demonstrated antibacterial efficacy against several bacteria related to dental caries and periodontal diseases, causing a transition in the biofilm balance without inducing resistance. When DMAHDM was included in acrylic resin, the material cytotoxicity increased, and changes in mechanical properties were observed. In contrast, resin composites had their mechanical properties maintained in most studies; however, toxicity was not examined. The association between DMAHDM and 2-methacryloyloxyethyl phosphorylcholine or silver nanoparticles improved the antibacterial effect. Besides, the association with nanoparticles of amorphous calcium phosphate or nanoparticles of calcium fluoride can provide remineralization capacity. There is a lack of information on the cytotoxicity and bacteria resistance induction, and further studies are needed to address this.
Collapse
|
19
|
Parhi S, Pal S, Das SK, Ghosh P. Strategies toward development of antimicrobial biomaterials for dental healthcare applications. Biotechnol Bioeng 2021; 118:4590-4622. [PMID: 34599764 DOI: 10.1002/bit.27948] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/28/2021] [Revised: 08/19/2021] [Accepted: 09/26/2021] [Indexed: 12/25/2022]
Abstract
Several approaches for elimination of oral pathogens are being explored at the present time since oral diseases remain prevalent affecting approximately 3.5 billion people worldwide. Need for antimicrobial biomaterials in dental healthcare include but is not restricted to designing resin composites and adhesives for prevention of dental caries. Constant efforts are also being made to develop antimicrobial strategies for clearance of endodontic space prior root canal treatment and for treatment of periimplantitis and periodontitis. This article discusses various conventional and nanotechnology-based strategies to achieve antimicrobial efficacy in dental biomaterials. Recent developments in the design and synthesis of antimicrobial peptides and antifouling zwitterionic polymers to effectively lessen the risks of antimicrobial drug resistance are also outlined in this review. Further, the role of contemporary strategies such as use of smart biomaterials, ionic solvent-based biomaterials and quorum quenchers incorporated biomaterials in the elimination of dental pathogens are described in detail. Lastly, we mentioned the approach of using polymers to print custom-made three-dimensional antibacterial dental products via additive manufacturing technologies. This review provides a critical perspective on the chemical, biomimetic, and engineering strategies intended for developing antimicrobial biomaterials that have the potential to substantially improve the dental health.
Collapse
Affiliation(s)
- Shivangi Parhi
- Division of Structural Biology and Bioinformatics, CSIR-Indian Institute of Chemical Biology, Kolkata, India.,Academy of Scientific and Innovative Research (AcSIR), AcSIR Headquarters CSIR-HRDC Campus, Ghaziabad, India
| | - Sreyasi Pal
- Division of Structural Biology and Bioinformatics, CSIR-Indian Institute of Chemical Biology, Kolkata, India
| | - Sujoy K Das
- Academy of Scientific and Innovative Research (AcSIR), AcSIR Headquarters CSIR-HRDC Campus, Ghaziabad, India.,Division of Infectious Diseases and Immunology, CSIR-Indian Institute of Chemical Biology, Kolkata, India
| | - Paulomi Ghosh
- Division of Structural Biology and Bioinformatics, CSIR-Indian Institute of Chemical Biology, Kolkata, India.,Academy of Scientific and Innovative Research (AcSIR), AcSIR Headquarters CSIR-HRDC Campus, Ghaziabad, India
| |
Collapse
|
20
|
Lai YJ, Takahashi R, Lin PY, Kuo L, Zhou Y, Matin K, Chiang YC, Shimada Y, Tagami J. Anti-Demineralization Effects of Dental Adhesive-Composites on Enamel-Root Dentin Junction. Polymers (Basel) 2021; 13:polym13193327. [PMID: 34641143 PMCID: PMC8512347 DOI: 10.3390/polym13193327] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2021] [Revised: 09/26/2021] [Accepted: 09/26/2021] [Indexed: 12/28/2022] Open
Abstract
Oral biofilm reactor (OBR) and pH cycling (pHC) artificial caries model were employed to evaluate the anti-demineralization effects of four composite filling systems on enamel-root dentin junction. Sixty-four enamel-root dentin blocks (6 mm × 6 mm × 2 mm) each with a cylindrical cavity were randomly assigned to the pHC and OBR group, then four subgroups (n = 8) and filled with either the Beautifil II (BEF, SPRG-filler-containing) or Estelite (EST) composite after the adhesive (either Single Bond Universal (SBU) or FL Bond II (FL, SPRG-filler-containing)). The demineralization lesions of filling interface were examined by micro-computerized tomography (μCT) and swept-source-optical coherence tomography (SS-OCT). According to the degree of interface damage, the caries lesions were sorted into four types: Type A and B (no attachment loss); Type C and D (attachment loss). EST/SBU showed the worst demineralization lesion and attachment loss (100% Type D), while BEF/FL exhibited the shallowest lesion depth (p < 0.05, 145 ± 45 μm on enamel, 275 ± 35 μm on root dentin) and no attachment loss (75% Type A and 25% Type B). Using FL adhesive alone does not effectively reduce enamel demineralization. BEF plays a leading role in acid resistance. The combination of BEF and FL showed a cumulative synergistic effect on anti-demineralization.
Collapse
Affiliation(s)
- Yu-Jung Lai
- School of Dentistry, Graduate Institute of Clinical Dentistry, National Taiwan University, Taipei 10048, Taiwan;
- Dental Department, Division of Restorative and Aesthetic Dentistry, National Taiwan University Hospital, Taipei 100229, Taiwan;
| | - Rena Takahashi
- Department of Cariology and Operative Dentistry, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo 113-8549, Japan; (R.T.); (Y.Z.); (K.M.); (Y.S.); (J.T.)
| | - Po-Yen Lin
- Department of Dentistry, School of Dentistry, National Yang Ming Chiao Tung University, Taipei 112, Taiwan;
| | - Ling Kuo
- Dental Department, Division of Restorative and Aesthetic Dentistry, National Taiwan University Hospital, Taipei 100229, Taiwan;
| | - Yuan Zhou
- Department of Cariology and Operative Dentistry, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo 113-8549, Japan; (R.T.); (Y.Z.); (K.M.); (Y.S.); (J.T.)
| | - Khairul Matin
- Department of Cariology and Operative Dentistry, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo 113-8549, Japan; (R.T.); (Y.Z.); (K.M.); (Y.S.); (J.T.)
| | - Yu-Chih Chiang
- School of Dentistry, Graduate Institute of Clinical Dentistry, National Taiwan University, Taipei 10048, Taiwan;
- Dental Department, Division of Restorative and Aesthetic Dentistry, National Taiwan University Hospital, Taipei 100229, Taiwan;
- Molecular Imaging Center, National Taiwan University, Taipei 10617, Taiwan
- Correspondence: ; Tel: +886-2-23123456; Fax: +886-2-23831346
| | - Yasushi Shimada
- Department of Cariology and Operative Dentistry, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo 113-8549, Japan; (R.T.); (Y.Z.); (K.M.); (Y.S.); (J.T.)
| | - Junji Tagami
- Department of Cariology and Operative Dentistry, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo 113-8549, Japan; (R.T.); (Y.Z.); (K.M.); (Y.S.); (J.T.)
| |
Collapse
|
21
|
Mitwalli H, AlSahafi R, Albeshir EG, Dai Q, Sun J, Oates TW, Melo MAS, Xu HHK, Weir MD. Novel Nano Calcium Fluoride Remineralizing and Antibacterial Dental Composites. J Dent 2021; 113:103789. [PMID: 34455017 DOI: 10.1016/j.jdent.2021.103789] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/17/2021] [Revised: 08/06/2021] [Accepted: 08/17/2021] [Indexed: 02/06/2023] Open
Abstract
OBJECTIVE Composites with remineralizing and antibacterial properties are favorable for caries inhibition. The objectives of this study were to develop a new bioactive nanocomposite with remineralizing and antibiofilm properties by incorporating dimethylaminohexadecyl methacrylate (DMAHDM) and nano-calcium fluoride (nCaF2). METHODS nCaF2 was produced via a spray-drying method and integrated at 15% mass fraction into composite. DMAHDM was added at 3% mass fraction. Mechanical properties and F and Ca ion releases were assessed. Colony-forming units (CFU), lactic acid and metabolic activity of biofilms on composites were performed. RESULTS The new composites had flexural strengths of (95.28±6.32) MPa and (125.93±7.49) MPa, which were within the ISO recommendations. Biofilm CFU were reduced by 3-4 log (p<0.05). The composites achieved high F releases of (0.89±0.01) mmol/L and (0.44±0.01) mmol/L, and Ca releases of (1.46±0.05) mmol/L and (0.54±0.005) mmol/L. CONCLUSIONS New nanocomposites were developed with good mechanical properties, potent antibacterial activity against salivary biofilms, and high F and Ca ion releases with potential for remineralization. CLINICAL SIGNIFICANCE Novel nanocomposites using nCaF2 and DMAHDM were developed with potent antibacterial and remineralizing effects and high F and Ca ion releases. They are promising to inhibit recurrent caries, promote remineralization, and possess long-term sustainability.
Collapse
Affiliation(s)
- Heba Mitwalli
- Program in Dental Biomedical Sciences, University of Maryland School of Dentistry, Baltimore, MD 21201, United States; Department of Restorative Dental Science, College of Dentistry, King Saud University, Riyadh 11451, Saudi Arabia
| | - Rashed AlSahafi
- Program in Dental Biomedical Sciences, University of Maryland School of Dentistry, Baltimore, MD 21201, United States; Department of Restorative Dental Sciences, College of Dentistry, Umm Al-Qura University, Makkah 24211, Saudi Arabia
| | - Ebtehal G Albeshir
- Program in Dental Biomedical Sciences, University of Maryland School of Dentistry, Baltimore, MD 21201, United States; Department of Restorative Dentistry, King Abdul-Aziz Medical City, Riyadh 11426, Saudi Arabia
| | - Quan Dai
- Program in Dental Biomedical Sciences, University of Maryland School of Dentistry, Baltimore, MD 21201, United States; Clinical Research Center of Shaanxi Province for Dental and Maxillofacial Diseases, Key Laboratory of Shaanxi Province for Craniofacial Precision Medicine Research; College of Stomatology, Xi'an Jiaotong University, Xi'an, Shaanxi 710004, China
| | - Jirun Sun
- The Forsyth Institute, A Harvard School of Dental Medicine Affiliate, 245 First Street, Cambridge, MA 02142, United States
| | - Thomas W Oates
- Department of Advanced Oral Sciences and Therapeutics, School of Dentistry, University of Maryland, Baltimore, MD 21201, United States
| | - Mary Anne S Melo
- Department of Advanced Oral Sciences and Therapeutics, School of Dentistry, University of Maryland, Baltimore, MD 21201, United States; Division of Operative Dentistry, Department of General Dentistry, University of Maryland School of Dentistry, Baltimore, MD 21201, United States
| | - Hockin H K Xu
- Department of Advanced Oral Sciences and Therapeutics, School of Dentistry, University of Maryland, Baltimore, MD 21201, United States; Center for Stem Cell Biology & Regenerative Medicine, University of Maryland School of Medicine, Baltimore, MD 21201, United States; Marlene and Stewart Greenebaum Cancer Center, University of Maryland School of Medicine, Baltimore, MD 21201, United States.
| | - Michael D Weir
- Department of Advanced Oral Sciences and Therapeutics, School of Dentistry, University of Maryland, Baltimore, MD 21201, United States.
| |
Collapse
|
22
|
Li H, Chen X, Lu W, Wang J, Xu Y, Guo Y. Application of Electrospinning in Antibacterial Field. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:1822. [PMID: 34361208 PMCID: PMC8308247 DOI: 10.3390/nano11071822] [Citation(s) in RCA: 27] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/07/2021] [Revised: 06/07/2021] [Accepted: 06/08/2021] [Indexed: 02/06/2023]
Abstract
In recent years, electrospun nanofibers have attracted extensive attention due to their large specific surface area, high porosity, and controllable shape. Among the many applications of electrospinning, electrospun nanofibers used in fields such as tissue engineering, food packaging, and air purification often require some antibacterial properties. This paper expounds the development potential of electrospinning in the antibacterial field from four aspects: fiber morphology, antibacterial materials, antibacterial mechanism, and application fields. The effects of fiber morphology and antibacterial materials on the antibacterial activity and characteristics are first presented, then followed by a discussion of the antibacterial mechanisms and influencing factors of these materials. Typical application examples of antibacterial nanofibers are presented, which show the good prospects of electrospinning in the antibacterial field.
Collapse
Affiliation(s)
- Honghai Li
- Key Laboratory of Photochemical Conversion and Optoelectronic Material, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China; (H.L.); (X.C.)
- School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Xin Chen
- Key Laboratory of Photochemical Conversion and Optoelectronic Material, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China; (H.L.); (X.C.)
- School of Future Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Weipeng Lu
- Key Laboratory of Photochemical Conversion and Optoelectronic Material, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China; (H.L.); (X.C.)
| | - Jie Wang
- School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Yisheng Xu
- School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Yanchuan Guo
- School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
| |
Collapse
|
23
|
Mahkam M, Bazmi Zeynabad F, Alizadeh E, Rahimi M, Rahimi F, Salehi R. Novel Methotrexate-Ciprofloxacin Loaded Alginate-Clay Based Nanocomposite as Anticancer and Antibacterial Co-Drug Delivery System. Adv Pharm Bull 2021; 11:477-489. [PMID: 34513622 PMCID: PMC8421626 DOI: 10.34172/apb.2021.055] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2019] [Revised: 05/22/2020] [Accepted: 06/30/2020] [Indexed: 01/03/2023] Open
Abstract
Purpose: In last decades, by increasing multi-drug resistant microbial pathogens an urgent demand was felt in the development of novel antimicrobial agents. Methods: Promising nanocomposites composed of clay/alginate/imidazolium-based ionic liquid, have been developed via intercalation of calcium alginate and ionic liquid by ion exchange method. These tailored nanocomposites were used as nanocarriers to simultaneously deliver methotrexate (MTX), and ciprofloxacin (CIP), as anticancer and antibacterial agents, respectively to MCF-7 breast cancer cells. Nanocomposites were fully characterized by scanning electron microscopy studies (SEM), X-ray diffraction (XRD), Fourier transforms infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA) methods. The in vitro antimicrobial potential of the mentioned nanocomposites in free and dual-drug loaded form was investigated on Pseudomonas aeruginosa and Escherichia coli bacteria. The antitumor activity of nano-formulations was evaluated by both MTT assay and cell cycle arrest. Results: The dual drug-loaded nanocomposites with exceptionally high loading efficiency (MTX: 99 ±0.4% and CIP: 98 ±1.2%) and mean particle size of 70 nm were obtained with obvious pH-responsive MTX and CIP release (both drugs release rate was increased at pH 5.8 compared to 7.4). The antibacterial activity of CIP-loaded nanocomposites was significantly higher in comparison with free CIP (P <0.001). The antitumor activity results revealed that MTX cytotoxicity on MCF-7 cells was significantly higher in nano-formulations compared to free MTX (P <0.001). Both MTX-loaded nanocomposites caused S-phase arrest in MCF-7 cells compared to non-treated cells (P ˂ 0.001). Conclusion: Newly developed smart nanocomposites are potentially effective pH-sustainable delivery systems for enhanced tumor therapy.
Collapse
Affiliation(s)
- Mehrdad Mahkam
- Chemistry Department, Azarbaijan Shahid Madani University, Tabriz, Iran
| | | | - Effat Alizadeh
- Department of Medical Biotechnology, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Mahdi Rahimi
- Department of Organic and Biochemistry, Faculty of Chemistry, University of Tabriz, Tabriz, Iran
| | - Fariborz Rahimi
- Department of Electrical Engineering, University of Bonab, Bonab, Iran
| | - Roya Salehi
- Drug Applied Research Center and Department of Medical Nanotechnology, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences, Tabriz, Iran
| |
Collapse
|
24
|
Clarin A, Ho D, Soong J, Looi C, Ipe DS, Tadakamadla SK. The Antibacterial and Remineralizing Effects of Biomaterials Combined with DMAHDM Nanocomposite: A Systematic Review. MATERIALS (BASEL, SWITZERLAND) 2021; 14:1688. [PMID: 33808198 PMCID: PMC8037094 DOI: 10.3390/ma14071688] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/03/2021] [Revised: 03/23/2021] [Accepted: 03/26/2021] [Indexed: 12/14/2022]
Abstract
Researchers have developed novel nanocomposites that incorporate additional biomaterials with dimethylaminohexadecyl methacrylate (DMAHDM) in order to reduce secondary caries. The aim of this review was to summarize the current literature and assess the synergistic antibacterial and remineralizing effects that may contribute to the prevention of secondary caries. An electronic search was undertaken in MEDLINE using PubMed, Embase, Scopus, Web of Science and Cochrane databases. The initial search identified 954 papers. After the removal of duplicates and screening the titles and abstracts, 15 articles were eligible for this review. The amalgamation of 2-methacryloyloxyethyl phosphorylcholine (MPC) and silver nanoparticles (AgNPs) with DMAHDM resulted in increased antibacterial potency. The addition of nanoparticles of amorphous calcium phosphate (NACP) and polyamidoamine dendrimers (PAMAM) resulted in improved remineralization potential. Further clinical studies need to be planned to explore the antibacterial and remineralizing properties of these novel composites for clinical success.
Collapse
Affiliation(s)
- Alison Clarin
- School of Dentistry and Oral Health, Griffith University, Gold Coast 4217, Australia; (A.C.); (D.H.); (J.S.); (C.L.); (D.S.I.)
| | - Daphne Ho
- School of Dentistry and Oral Health, Griffith University, Gold Coast 4217, Australia; (A.C.); (D.H.); (J.S.); (C.L.); (D.S.I.)
| | - Jana Soong
- School of Dentistry and Oral Health, Griffith University, Gold Coast 4217, Australia; (A.C.); (D.H.); (J.S.); (C.L.); (D.S.I.)
| | - Cheryl Looi
- School of Dentistry and Oral Health, Griffith University, Gold Coast 4217, Australia; (A.C.); (D.H.); (J.S.); (C.L.); (D.S.I.)
| | - Deepak Samuel Ipe
- School of Dentistry and Oral Health, Griffith University, Gold Coast 4217, Australia; (A.C.); (D.H.); (J.S.); (C.L.); (D.S.I.)
- Menzies Health Institute Queensland, Gold Coast 4217, Australia
| | - Santosh Kumar Tadakamadla
- School of Dentistry and Oral Health, Griffith University, Gold Coast 4217, Australia; (A.C.); (D.H.); (J.S.); (C.L.); (D.S.I.)
- Menzies Health Institute Queensland, Gold Coast 4217, Australia
| |
Collapse
|
25
|
Bilgili Can D, Dündar A, Barutçugil Ç, Koyuncu Özyurt Ö. Evaluation of surface characteristic and bacterial adhesion of low-shrinkage resin composites. Microsc Res Tech 2021; 84:1783-1793. [PMID: 33586287 DOI: 10.1002/jemt.23735] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/18/2020] [Revised: 01/21/2021] [Accepted: 02/01/2021] [Indexed: 11/10/2022]
Abstract
This study aimed to examine the surface characteristics of low shrinkage composites and adhesion of Streptococcus mutans and Streptococcus mitis to these materials. Control material (glass) and three low shrinkage composites (Charisma Diamond, Kalore GC, Beatiful II LS) were used. After polishing procedure was applied to composite specimens, surface roughness (SR), surface free energy (SFE), and contact angle measurements were performed. Surfaces of composite were analyzed using scanning electron microscope and energy-dispersive X-ray spectroscopy. After pellicle formation with artificial saliva, S. mutans and S. mitis biofilms were incubated in 5% CO2 for 24 h at 37°C and were analyzed using confocal laser scanning microscopy. The lowest SR and highest SFE values were found in the control group. While the contact angle of control was statistically lower than composites, statistically difference was not found between composite groups. S. mutans adhesion of composites was significantly lower than control group, but there was no significant difference between composites. S. mitis adhesion of all groups was statistically similar. SR did not affect the S. mutans and S. mitis adhesion. Less adherence of S. mutans to low shrinkage composites was associated with low SFE and high contact angle values. Even though the highest SR was observed in the Charisma Diamond, no difference was found between the composites in terms of bacterial adhesion.
Collapse
Affiliation(s)
- Dilber Bilgili Can
- Department of Restorative Dentistry, Faculty of Dentistry, Yüzüncü Yıl University, Van, Turkey
| | - Ayşe Dündar
- Department of Restorative Dentistry, Faculty of Dentistry, Akdeniz University, Antalya, Turkey
| | - Çağatay Barutçugil
- Department of Restorative Dentistry, Faculty of Dentistry, Akdeniz University, Antalya, Turkey
| | - Özlem Koyuncu Özyurt
- Department of Medical Microbiology, Faculty of Medicine, Akdeniz University, Antalya, Turkey
| |
Collapse
|
26
|
Application of Antimicrobial Polymers in the Development of Dental Resin Composite. Molecules 2020; 25:molecules25204738. [PMID: 33076515 PMCID: PMC7587579 DOI: 10.3390/molecules25204738] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/28/2020] [Revised: 10/12/2020] [Accepted: 10/15/2020] [Indexed: 12/20/2022] Open
Abstract
Dental resin composites have been widely used in a variety of direct and indirect dental restorations due to their aesthetic properties compared to amalgams and similar metals. Despite the fact that dental resin composites can contribute similar mechanical properties, they are more likely to have microbial accumulations leading to secondary caries. Therefore, the effective and long-lasting antimicrobial properties of dental resin composites are of great significance to their clinical applications. The approaches of ascribing antimicrobial properties to the resin composites may be divided into two types: The filler-type and the resin-type. In this review, the resin-type approaches were highlighted. Focusing on the antimicrobial polymers used in dental resin composites, their chemical structures, mechanical properties, antimicrobial effectiveness, releasing profile, and biocompatibility were included, and challenges, as well as future perspectives, were also discussed.
Collapse
|
27
|
Torres Jr L, Bienek DR. Use of Protein Repellents to Enhance the Antimicrobial Functionality of Quaternary Ammonium Containing Dental Materials. J Funct Biomater 2020; 11:E54. [PMID: 32752169 PMCID: PMC7565790 DOI: 10.3390/jfb11030054] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2020] [Revised: 07/22/2020] [Accepted: 07/23/2020] [Indexed: 12/27/2022] Open
Abstract
An advancement in preventing secondary caries has been the incorporation of quaternary ammonium containing (QAC) compounds into a composite resin mixture. The permanent positive charge on the monomers allows for electrostatic-based killing of bacteria. Spontaneous adsorption of salivary proteins onto restorations dampens the antimicrobial capabilities of QAC compounds. Protein-repellent monomers can work with QAC restorations to achieve the technology's full potential. We discuss the theory behind macromolecular adsorption, direct and indirect characterization methods, and advances of protein repellent dental materials. The translation of protein adsorption to microbial colonization is covered, and the concerns and fallbacks of the state-of-the-art protein-resistant monomers are addressed. Last, we present new and exciting avenues for protein repellent monomer design that have yet to be explored in dental materials.
Collapse
Affiliation(s)
| | - Diane R. Bienek
- ADA Science & Research Institute, LLC, Innovative & Technology Research, Frederick, MD 21704, USA;
| |
Collapse
|
28
|
Study of the Mechanism of the Antimicrobial Activity of Novel Water Soluble Ammonium Quaternary Benzanthrone on Model Membranes. J Membr Biol 2020; 253:247-256. [PMID: 32393995 DOI: 10.1007/s00232-020-00121-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/30/2020] [Accepted: 05/02/2020] [Indexed: 10/24/2022]
Abstract
The increasing resistance of many pathogens to most of the common antimicrobials requires the development of new substances with more effective antimicrobial properties. In the present work, we investigated the mechanism of the antimicrobial activity of novel water soluble ammonium quaternary benzanthrone (Compound B) on model membranes, composed of dipalmitoylphosphatidylcholine, 1-palmitoyl-2-oleoylphosphatidylcholine, dipalmitoylphosphatidylglycerol, 1-palmitoyl-2-oleoylphosphatidylglycerol, and dipalmitoylphosphatidylethanolamine (DPPE). The lipids were chosen to represent a model of a bacterial membrane. The changes in surface pressure of the model membranes, before and after the addition of Compound B, were studied by the Langmuir's monolayer method, and the compressional modulus for each monolayer was determined. In addition, the surface morphology of the lipid monolayers before and after injection of Compound B was monitored by Brewster Angle Microscopy. The results showed that Compound B penetrated all the monolayers studied. The most noticeable effects were found with the negatively charged phosphatidylglycerols and with DPPE leading to the conclusion that the electrostatic interactions between the compound and the lipid head groups and the possible formation of hydrogen bonds between the amino group of the ethanolamine and the keto groups in the structure of Compound B are of great importance. In addition, the penetration ability of the benzoquinone with all phospholipids studied was stable even at higher values of the surface pressure, i.e. thicker monolayers, due to the hydrophobic interaction, which plays also an important role for the antimicrobial activity of Compound B.
Collapse
|
29
|
Bienek DR, Giuseppetti AA, Okeke UC, Frukhtbeyn SA, Dupree PJ, Khajotia SS, Esteban Florez FL, Hiers RD, Skrtic D. Antimicrobial, biocompatibility, and physicochemical properties of novel adhesive methacrylate dental monomers. J BIOACT COMPAT POL 2020. [DOI: 10.1177/0883911520911660] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
For the advancement of Class V restoratives, our goal was to evaluate the physicochemical and mechanical properties, antimicrobial functionality, and cytotoxic potential of novel antimicrobial copolymers. 5-Carboxy-N-(2-(methacryloyloxy)ethyl)-N,N-dimethylpentan-1-aminium bromide (AMadh1) and 10-carboxy-N-(2-(methacryloyloxy)ethyl)-N,N-dimethyldecan-1-aminium bromide (AMadh2) were incorporated into light-curable urethane dimethacrylate, polyethylene glycol–extended urethane dimethacrylate, ethyl 2-(hydroxymethyl) acrylate resin (UPE resin). In the AMadhs-UPE resin, the hydrophobic/hydrophilic balance, degree of vinyl conversion, flexural strength, elastic modulus, and shear bond strength were assessed. Antimicrobial properties were measured using Streptococcus mutans (planktonic and biofilm). Cytotoxicity was tested using human gingival fibroblasts and mouse connective tissue fibroblasts (ATCC® CCL-1™) exposed to two-fold serial dilutions (≤10.6 mmol/L AMadh1 or ≤8.8 mmol/L AMadh2). At 10% mass of AMadh, the attained degree of vinyl conversion values (AMadh1 = 90.1% and AMadh2 = 88.5%) were not statistically different from the UPE resin (88.1%). At both AMadh levels, the flexural strength was reduced in a dose-dependent manner. Elastic modulus and contact angle were not significantly affected by AMadh1. Variations in elastic modulus and contact angle were observed with AMadh2; however, this does not disqualify it in future design of Class V restoratives. Compared to UPE resin, AMadh1-UPE and AMadh2-UPE (10% mass) copolymers reduced S. mutans biofilm 4.2- and 1.6-fold, respectively (p ≤ 0.006). In direct contact with human gingival fibroblasts or ATCC CCL-1 cells, at biologically relevant concentrations, the AMadhs did not adversely affect cell viability or their metabolic activity. This effort addresses a significant oral health issue associated with elderly populations. Its successful completion is expected to yield dental restoratives with well-controlled biofunction.
Collapse
Affiliation(s)
- Diane R Bienek
- Innovative & Technology Research, ADA Science & Research Institute, LLC, Frederick, MD, USA
| | - Anthony A Giuseppetti
- Innovative & Technology Research, ADA Science & Research Institute, LLC, Frederick, MD, USA
| | - Ugochukwu C Okeke
- Agricultural Research Service, US Department of Agriculture, Washington, DC, USA
| | - Stanislav A Frukhtbeyn
- Innovative & Technology Research, ADA Science & Research Institute, LLC, Frederick, MD, USA
| | - Peter J Dupree
- School of Dentistry, Louisiana State University Health Sciences Center, New Orleans, LA, USA
| | - Sharukh S Khajotia
- College of Dentistry, The University of Oklahoma, Oklahoma City, OK, USA
| | | | - Rochelle D Hiers
- College of Dentistry, The University of Oklahoma, Oklahoma City, OK, USA
| | - Drago Skrtic
- Innovative & Technology Research, ADA Science & Research Institute, LLC, Frederick, MD, USA
| |
Collapse
|
30
|
Bhadila G, Baras BH, Weir MD, Wang H, Melo MAS, Hack GD, Bai Y, Xu HHK. Novel antibacterial calcium phosphate nanocomposite with long-term ion recharge and re-release to inhibit caries. Dent Mater J 2020; 39:678-689. [PMID: 32295987 DOI: 10.4012/dmj.2019-203] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/08/2023]
Abstract
Short-term studies on calcium-phosphate (CaP) ion-rechargeable composites were reported. The long-term rechargeability is important but unknown. The objectives of this study were to investigate nanocomposite with strong antibacterial and ion-recharge capabilities containing dimethylaminododecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP), and evaluate long-term ion-recharge by testing for 12 cycles (taking 6 months to complete) for the first time. Three groups were tested: (1) Heliomolar control; (2) Resin+20%NACP+50%glass; (3) Resin+3%DMAHDM+20%NACP+50%glass. Biofilm acid and colony-forming units (CFU) were measured. Ion-recharge was tested for 12 cycles. NACP-DMAHDM composite reduced biofilm acid, and reduced CFU by 4 logs. High levels of ion releases were maintained throughout 12 cycles of recharge, maintaining steady-state releases without reduction in 6 months (p>0.1), representing long-term remineralization potential. Bioactive nanocomposite demonstrated long-term ion-rechargeability for the first time, showed remineralization and potent anti-biofilm functions, with promise for tooth restorations to combat caries.
Collapse
Affiliation(s)
- Ghalia Bhadila
- Biomedical Sciences, Biomaterials and Tissue Engineering Division, University of Maryland School of Dentistry.,Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry.,Department of Pediatric Dentistry, Faculty of Dentistry, King AbdulAziz University
| | - Bashayer H Baras
- Biomedical Sciences, Biomaterials and Tissue Engineering Division, University of Maryland School of Dentistry.,Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry.,Department of Restorative Dental Science, College of Dentistry, King Saud University
| | - Michael D Weir
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry
| | - Haohao Wang
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry.,State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology
| | - Mary Ann S Melo
- Division of Operative Dentistry, Department of General Dentistry, University of Maryland School of Dentistry
| | - Gary D Hack
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry
| | - Yuxing Bai
- Department of Orthodontics, School of Stomatology, Capital Medical University
| | - Hockin H K Xu
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry.,Center for Stem Cell Biology & Regenerative Medicine, University of Maryland School of Medicine.,Marlene and Stewart Greenebaum Cancer Center, University of Maryland School of Medicine
| |
Collapse
|
31
|
Wieczorek D, Kwaśniewska D, Hsu LH, Shen TL, Chen YL. Antifungal Activity of Morpholine and Piperidine Based Surfactants. TENSIDE SURFACT DET 2020. [DOI: 10.3139/113.110667] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
Abstract
Abstract
Microorganisms have the remarkable capacity to develop resistance to antimicrobial agents. This is of particular concern for fungal pathogens which cause devastating invasive infections with limited treatment options. Thus the need for new antifungal agents is undeniable. This work presents the antifungal properties of four surfactant groups, namely two groups of sulfobetaines and two groups of quaternary ammonium compounds, all morpholine and piperidine derivatives, against drug susceptible or drug resistant Candida albicans and Cryptococcus neoformans. The values of minimum inhibitory and fungicidal concentrations were determined. As follows from the results, the activities of the obtained compounds differed, however the most active agents from each homologous series of compounds, such as P16S3, P16S4 and C16S3, were pointed out.
Collapse
Affiliation(s)
- Daria Wieczorek
- Department of Technology and Instrumental Analysis , Faculty of Commodity Science, Poznan , Poland
| | - Dobrawa Kwaśniewska
- Department of Technology and Instrumental Analysis , Faculty of Commodity Science, Poznan , Poland
| | - Li-Hang Hsu
- Department of Plant Pathology and Microbiology , National Taiwan University, Taipei , Taiwan
| | - Tang-Long Shen
- Department of Plant Pathology and Microbiology , National Taiwan University, Taipei , Taiwan
| | - Ying-Lien Chen
- Department of Plant Pathology and Microbiology , National Taiwan University, Taipei , Taiwan
| |
Collapse
|
32
|
Li S, Yu X, Liu F, Deng F, He J. Synthesis of antibacterial dimethacrylate derived from niacin and its application in preparing antibacterial dental resin system. J Mech Behav Biomed Mater 2019; 102:103521. [PMID: 31877526 DOI: 10.1016/j.jmbbm.2019.103521] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/17/2019] [Revised: 11/02/2019] [Accepted: 11/04/2019] [Indexed: 12/15/2022]
Abstract
In this research, a bio-based monomer 1,3-bis(methacryloyloxy)propyl-carbonyl- hexylpyridinium bromide (QANMA) that derived from niacin was synthesized and incorporated into Bisphenol A glycidyl methacrylate (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA) (50 wt/50 wt) with a series of mass fraction as antibacterial agent. The double bond conversion (DC), volumetric shrinkage (VS), mechanical properties, water sorption (WS) and solubility (SL) were investigated among groups with different QANMA concentrations. Antibacterial activity against S. mutans were conducted by bacteria colony counting and bacteria LIVE/DEAD staining. The results showed that QANMA had no influence on DC of dental resin (p > 0.05), but would lead to lower volumetric shrinkage (p < 0.05). Only dental resin with 10 wt% and 20 wt% of QANMA showed obviously antibacterial activity. Mechanical properties, WS and SL of dental resin could be impaired by incorporation QANMA, flexural strength and modulus were decreased with the increasing of QANMA concentration (p < 0.05), while WS and SL were increased with the increasing of QANMA concentration (p < 0.05). Dental resin with 10 wt% of QANMA seemed to be the optimal resin system in this research, for it showed significant antibacterial activity and its flexural strength was still met the requirement of ISO standard. This work suggested that bio-based monomer QANMA could be used as antibacterial agent in dental materials, but further optimization experiment and biocompatibility evaluation should be taken in future.
Collapse
Affiliation(s)
- Shuang Li
- College of Materials Science and Engineering, South China University of Technology, Guangzhou, PR China
| | - Xiaolin Yu
- Department of Oral Implantology, Guanghua School of Stomatology, Hospital of Stomatology, Guangdong Provincial Key Laboratory of Stomatology, Sun Yat-sen University, Guangzhou, PR China
| | - Fang Liu
- College of Materials Science and Engineering, South China University of Technology, Guangzhou, PR China
| | - Feilong Deng
- Department of Oral Implantology, Guanghua School of Stomatology, Hospital of Stomatology, Guangdong Provincial Key Laboratory of Stomatology, Sun Yat-sen University, Guangzhou, PR China.
| | - Jingwei He
- College of Materials Science and Engineering, South China University of Technology, Guangzhou, PR China.
| |
Collapse
|
33
|
Synthesis, Surface and Antimicrobial Activity of New Lactose-Based Surfactants. MOLECULES (BASEL, SWITZERLAND) 2019; 24:molecules24214010. [PMID: 31694341 PMCID: PMC6864828 DOI: 10.3390/molecules24214010] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/23/2019] [Revised: 10/22/2019] [Accepted: 10/31/2019] [Indexed: 12/13/2022]
Abstract
This work presents a synthesis method for new surfactants based on lactose. The compounds obtained belong to the homologous series of O-β-D-Galactopyranosyl-(1→4)-N-alkyl-(3-sulfopropyl)-D-glucosamine hydrochloride, containing 12 and 14 carbon atoms in the alkyl chain, and they may serve as an example of cationic surfactants. The newly synthesized compounds exhibit good surface properties, low value of CMC (Critical Micelle Concentration) and good wetting properties. These surfactants' ability to produce foam is considerably higher than in the commercial surfactants. Moreover, antibacterial and fungistatic activity was carried out by well diffusion assay against the selected bacteria (Staphylococcus aureus, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa), yeasts (Candida albicans) and filamentous fungi (Fusarium graminearum, F. avenaceum, F. oxysporum, F. culmorum, F. equiseti, Alternaria alternata and Botrytis cinerea). It was shown that the resulting quaternary salts significantly inhibit the growth of tested microorganisms. Antibacterial and fungistatic activity of the surfactant compounds varied depending on the species of bacteria or fungi. The results of antimicrobial activity of new lactose derivatives indicate that the compounds exhibit larger or similar antagonistic activity against tested bacteria and fungi than typical cationic surfactant cetylpyridinium chloride.
Collapse
|
34
|
Kumar Tiwari S, Guo X, Huang Y, Zhou X, Xu HHK, Ren B, Peng X, Weir MD, Li M, Cheng L. The inhibitory effect of quaternary ammonium salt on bacteria in root canal. Sci Rep 2019; 9:12463. [PMID: 31462657 PMCID: PMC6713705 DOI: 10.1038/s41598-019-48666-4] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/31/2019] [Accepted: 08/05/2019] [Indexed: 02/05/2023] Open
Abstract
Persisting apical periodontitis is a primary reason for multiple intervention in root canal. Persisting bacteria in root canal is related with the persisting infection. Despite the advancement in treatment strategies the persisting infection is a major challenge for endodontist. Here we tested two newly developed quaternary ammonium methacrylates (QAMs) against endodontic bacteria and their biofilms. Their antibacterial and antibiofilm efficiency were compared with chlorhexidine (CHX) and sodium hypochlorite (NaOCl). We measured the MIC, MBC and MBIC of DMADDM and DMAHDM respectively. We also detected the ratio of live/dead bacteria and bacterial composition in the biofilms treated by DMADDM and DMAHDM. We found that DMADDM and DMAHDM could inhibit the growth of bacteria and biofilms formation. The result showed that novel QAMs were remarkably efficient than CHX against biofilms. In addition, we found that Streptococcus gordonii (S. gordonii) and Enterococcus faecalis (E. faecalis) were frequent isolates after treatment with antimicrobial compounds.
Collapse
Affiliation(s)
- Sanjay Kumar Tiwari
- State Key Laboratory of Oral Diseases & National Clinical Research Centre for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
- Department of Operative Dentistry and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Xiao Guo
- State Key Laboratory of Oral Diseases & National Clinical Research Centre for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
- Department of Operative Dentistry and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Yannan Huang
- State Key Laboratory of Oral Diseases & National Clinical Research Centre for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
- Department of Operative Dentistry and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Xuedong Zhou
- State Key Laboratory of Oral Diseases & National Clinical Research Centre for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
- Department of Operative Dentistry and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Hockin H K Xu
- Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School, Baltimore, MD21201, USA
| | - Biao Ren
- State Key Laboratory of Oral Diseases & National Clinical Research Centre for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Xian Peng
- State Key Laboratory of Oral Diseases & National Clinical Research Centre for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Michael D Weir
- Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School, Baltimore, MD21201, USA
| | - Mingyun Li
- State Key Laboratory of Oral Diseases & National Clinical Research Centre for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China.
| | - Lei Cheng
- State Key Laboratory of Oral Diseases & National Clinical Research Centre for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China.
- Department of Operative Dentistry and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China.
| |
Collapse
|
35
|
Liu Q, Wu B, Yu Q, Wang Y. Immobilization of quaternary ammonium based antibacterial monomer onto dentin substrate by non-thermal atmospheric plasma. Dent Mater J 2019; 38:821-829. [PMID: 31366767 DOI: 10.4012/dmj.2018-267] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
Use of non-thermal atmospheric plasma (NTAP) brush on immobilization of dimethylaminohexadecyl methacrylate (DMAHDM) onto dentin bonding substrate, and resulting antibacterial activity against Streptococcus mutans were investigated. A bonding substrate with several-micron-demineralized layer was created from human dentin. DMAHDM was applied onto the demineralized layer with or without plasma exposure. Scanning electron microscopy (SEM) and Fourier transformed infrared (FTIR) spectroscopy were employed to verify immobilization/grafting of DMAHDM onto the substrate. Antibacterial activity of the resulting substrate was assessed by using colony-forming unit (CFU) and confocal scanning laser microscopy. Effects of saliva pellicle treatment and aging process on the above substrate were also evaluated. The SEM/FTIR results demonstrated that NTAP could induce DMAHDM immobilization onto dentin substrate, which was further verified via quantitative FTIR analysis. Comparing with non-plasma-treated, the plasmatreated substrate, with CFU 4 log lower, exhibited much stronger inhibitory effects, which were minimally affected by saliva or aging. The DMAHDM-immobilized dentin substrate showed effective and sustained antibacterial characteristics.
Collapse
Affiliation(s)
- Qi Liu
- Department of Stomatology, Nanfang Hospital, Southern Medical University.,Department of Oral and Craniofacial Sciences, School of Dentistry, University of Missouri-Kansas City School of Dentistry
| | - Buling Wu
- Department of Stomatology, Nanfang Hospital, Southern Medical University
| | - Qingsong Yu
- Department of Mechanical and Aerospace Engineering, University of Missouri
| | - Yong Wang
- Department of Oral and Craniofacial Sciences, School of Dentistry, University of Missouri-Kansas City School of Dentistry
| |
Collapse
|
36
|
Maia AC, Mangabeira A, Vieira R, Neves ADA, Lopes RT, Pires TM, Viana GM, Cabral LM, Cavalcante LM, Portela MB. Experimental composites containing quaternary ammonium methacrylates reduce demineralization at enamel-restoration margins after cariogenic challenge. Dent Mater 2019; 35:e175-e183. [PMID: 31204047 DOI: 10.1016/j.dental.2019.05.021] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/10/2018] [Revised: 05/20/2019] [Accepted: 05/22/2019] [Indexed: 11/29/2022]
Abstract
OBJECTIVE This study evaluated the influence of experimental composites containing quaternary ammonium monomers (QAM) at different concentrations and alkyl chains on demineralization at enamel-composite margins after cariogenic challenge. METHODS Standardized 4×4mm cavities were cut into 35 bovine enamel blocks, which were randomly divided into seven groups (n=5) and restored with the following experimental composites and commercial materials: (G12.5) - 5% dimethylaminododecyl methacrylate (DMADDM) with a 12-carbon alkyl chain (G12.10) - 10% DMADDM, (G16.5) - 5% dimethylaminohexadecyl methacrylate (DMAHDM) with a 16-carbon alkyl chain (G16.10) - 10% DMAHDM, (CG) - control group (without QAM), (GZ250) - commercial composite (Filtek Z250®), and (GIC) - glass ionomer cement (Maxxion R®). After restorative procedures, initial microhardness was measured and experimental composites were subjected to Streptococcus mutans biofilm formation for 48h. After cariogenic challenge, the samples were washed and microhardness was reassessed. A 3D non-contact profilometer was used to determine surface roughness and enamel demineralization was assessed by micro-CT. Microhardness results were analyzed by the Kruskal-Wallis and Mann-Whitney tests and micro-CT results were analyzed by Tukey's HSD test (95% confidence interval). RESULTS None of the materials could prevent mineral loss at the enamel-restoration margins. The addition of 10% DMAHDM yielded the lowest, albeit statistically significant, mineral loss (p<0.05). 3D non-contact profilometry showed enamel surface roughness modification after biofilm exposure. The CG had the highest roughness values. Micro-CT analysis revealed mineral loss, except for GIC. SIGNIFICANCE The addition of 10% QAM with a 16-carbon chain in experimental composites reduced mineral loss at the enamel-restoration margins after cariogenic challenge.
Collapse
Affiliation(s)
- André Coimbra Maia
- Faculdade de Odontologia, Universidade Federal Fluminense, Niterói, RJ, Brazil
| | - Adrielle Mangabeira
- Faculdade de Odontologia, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil
| | - Renato Vieira
- Faculdade de Odontologia, Universidade Federal Fluminense, Niterói, RJ, Brazil
| | - Aline de Almeida Neves
- Faculdade de Odontologia, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil
| | - Ricardo Tadeu Lopes
- Laboratório de Instrumentação Nuclear, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil
| | - Thais Maria Pires
- Laboratório de Instrumentação Nuclear, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil
| | - Gil Mendes Viana
- Faculdade de Farmácia, Laboratório TIF, Universidade Federal do Rio de Janeiro - UFRJ, Rio de Janeiro, RJ, Brazil
| | - Lúcio Mendes Cabral
- Faculdade de Farmácia, Laboratório TIF, Universidade Federal do Rio de Janeiro - UFRJ, Rio de Janeiro, RJ, Brazil
| | - Larissa Maria Cavalcante
- Faculdade de Odontologia, Universidade Federal Fluminense, Niterói, RJ, Brazil; Núcleo de Pesquisa em Biomateriais Dentários, Faculdade de Odontologia, Universidade Veiga de Almeida - UVA, Rio de Janeiro, RJ, Brazil
| | | |
Collapse
|
37
|
Galiano F, Mancuso R, Guzzo MG, Lucente F, Gukelberger E, Losso MA, Figoli A, Hoinkis J, Gabriele B. New Polymeric Films with Antibacterial Activity Obtained by UV-induced Copolymerization of Acryloyloxyalkyltriethylammonium Salts with 2-Hydroethyl Methacrylate. Int J Mol Sci 2019; 20:E2696. [PMID: 31159299 PMCID: PMC6600214 DOI: 10.3390/ijms20112696] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2019] [Revised: 05/29/2019] [Accepted: 05/30/2019] [Indexed: 11/16/2022] Open
Abstract
New polymeric films with antibacterial activity have been prepared, by simple UV-induced copolymerization of readily available ω-(acryloyloxy)-N,N,N-triethylalcan-1-aminium bromides (or acryloyloxyalkyltriethylammonium bromides, AATEABs) with commercially available 2-hydroethyl methacrylate (HEMA), at different relative amounts. In particular, the antibacterial activity of polymeric films derived from 11-(acryloyloxy)-N,N,N-triethylundecan-1-aminium bromide (or acryloyloxyundecyltriethylammonium bromide, AUTEAB; bearing a C-11 alkyl chain linker between the acrylate polymerization function and the quaternary ammonium moiety) and 12-(acryloyloxy)-N,N,N-triethyldodecan-1-aminium bromide (or acryloyldodecyltriethylammonium bromide, ADTEB, bearing a C-12 alkyl chain linker) has been assessed against Gram-negative Escherichia Coli and Gram-positive Staphylococcus aureus cells. The results obtained have shown a clear concentration-dependent activity against both bacterial strains, the films obtained from homopolymerization of pure AUTEAB and ADTEAB being the most effective. Moreover, ADTEAB-based films showed a higher antibacterial activity with respect to the AUTEAB-based ones. Interestingly, however, both types of films presented a significant activity not only toward Gram-positive S. aureus, but also toward Gram-negative E. Coli cells.
Collapse
Affiliation(s)
- Francesco Galiano
- Institute on Membrane Technologies (ITM-CNR), Via Pietro Bucci 17/C, 87036 Arcavacata di Rende (CS), Italy.
| | - Raffaella Mancuso
- Laboratory of Industrial and Synthetic Organic Chemistry (LISOC), Department of Chemistry and Chemical Technologies, University of Calabria, 87036 Arcavacata di Rende (CS), Italy.
| | - Maria Grazia Guzzo
- Department of Biology, Ecology, and Earth Sciences (DiBEST), University of Calabria, 87036 Arcavacata di Rende (CS), Italy.
| | - Fabrizio Lucente
- Department of Biology, Ecology, and Earth Sciences (DiBEST), University of Calabria, 87036 Arcavacata di Rende (CS), Italy.
| | - Ephraim Gukelberger
- Laboratory of Industrial and Synthetic Organic Chemistry (LISOC), Department of Chemistry and Chemical Technologies, University of Calabria, 87036 Arcavacata di Rende (CS), Italy.
- University of Applied Sciences Karlsruhe, Center of Applied Research (CAR), Moltkestraße 30, 76133 Karlsruhe, Germany.
| | - Maria Adele Losso
- Department of Biology, Ecology, and Earth Sciences (DiBEST), University of Calabria, 87036 Arcavacata di Rende (CS), Italy.
| | - Alberto Figoli
- Institute on Membrane Technologies (ITM-CNR), Via Pietro Bucci 17/C, 87036 Arcavacata di Rende (CS), Italy.
| | - Jan Hoinkis
- University of Applied Sciences Karlsruhe, Center of Applied Research (CAR), Moltkestraße 30, 76133 Karlsruhe, Germany.
| | - Bartolo Gabriele
- Laboratory of Industrial and Synthetic Organic Chemistry (LISOC), Department of Chemistry and Chemical Technologies, University of Calabria, 87036 Arcavacata di Rende (CS), Italy.
| |
Collapse
|
38
|
Chi M, Qi M, A L, Wang P, Weir MD, Melo MA, Sun X, Dong B, Li C, Wu J, Wang L, Xu HHK. Novel Bioactive and Therapeutic Dental Polymeric Materials to Inhibit Periodontal Pathogens and Biofilms. Int J Mol Sci 2019; 20:E278. [PMID: 30641958 PMCID: PMC6359151 DOI: 10.3390/ijms20020278] [Citation(s) in RCA: 40] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/19/2018] [Revised: 01/09/2019] [Accepted: 01/09/2019] [Indexed: 12/19/2022] Open
Abstract
Periodontitis is a common infectious disease characterized by loss of tooth-supporting structures, which eventually leads to tooth loss. The heavy burden of periodontal disease and its negative consequence on the patient's quality of life indicate a strong need for developing effective therapies. According to the World Health Organization, 10⁻15% of the global population suffers from severe periodontitis. Advances in understanding the etiology, epidemiology and microbiology of periodontal pocket flora have called for antibacterial therapeutic strategies for periodontitis treatment. Currently, antimicrobial strategies combining with polymer science have attracted tremendous interest in the last decade. This review focuses on the state of the art of antibacterial polymer application against periodontal pathogens and biofilms. The first part focuses on the different polymeric materials serving as antibacterial agents, drug carriers and periodontal barrier membranes to inhibit periodontal pathogens. The second part reviews cutting-edge research on the synthesis and evaluation of a new generation of bioactive dental polymers for Class-V restorations with therapeutic effects. They possess antibacterial, acid-reduction, protein-repellent, and remineralization capabilities. In addition, the antibacterial photodynamic therapy with polymeric materials against periodontal pathogens and biofilms is also briefly described in the third part. These novel bioactive and therapeutic polymeric materials and treatment methods have great potential to inhibit periodontitis and protect tooth structures.
Collapse
Affiliation(s)
- Minghan Chi
- Department of Oral Implantology, School of Dentistry, Jilin University, Changchun 130021, China.
- Jilin Provincial Key Laboratory of Sciences and Technology for Stomatology Nanoengineering, Changchun 130021, China.
| | - Manlin Qi
- Department of Oral Implantology, School of Dentistry, Jilin University, Changchun 130021, China.
- Jilin Provincial Key Laboratory of Sciences and Technology for Stomatology Nanoengineering, Changchun 130021, China.
| | - Lan A
- Department of Oral Implantology, School of Dentistry, Jilin University, Changchun 130021, China.
- Jilin Provincial Key Laboratory of Sciences and Technology for Stomatology Nanoengineering, Changchun 130021, China.
| | - Ping Wang
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA.
| | - Michael D Weir
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA.
| | - Mary Anne Melo
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA.
| | - Xiaolin Sun
- Department of Oral Implantology, School of Dentistry, Jilin University, Changchun 130021, China.
- Jilin Provincial Key Laboratory of Sciences and Technology for Stomatology Nanoengineering, Changchun 130021, China.
| | - Biao Dong
- State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012, China.
| | - Chunyan Li
- Department of Oral Implantology, School of Dentistry, Jilin University, Changchun 130021, China.
- Jilin Provincial Key Laboratory of Sciences and Technology for Stomatology Nanoengineering, Changchun 130021, China.
| | - Junling Wu
- Shandong Provincial Key Laboratory of Oral Tissue Regeneration, Department of Prosthodontics, School of Stomatology, Shandong University, Jinan 250012, China.
| | - Lin Wang
- Department of Oral Implantology, School of Dentistry, Jilin University, Changchun 130021, China.
- Jilin Provincial Key Laboratory of Sciences and Technology for Stomatology Nanoengineering, Changchun 130021, China.
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA.
| | - Hockin H K Xu
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA.
- Center for Stem Cell Biology and Regenerative Medicine, University of Maryland School of Medicine, Baltimore, MD 21201, USA.
- University of Maryland Marlene and Stewart Greenebaum Cancer Center, University of Maryland School of Medicine, Baltimore, MD 21201, USA.
| |
Collapse
|
39
|
Preparation of surface-modified monodisperse polystyrene microspheres with cationic functional comonomer. Colloid Polym Sci 2018. [DOI: 10.1007/s00396-018-4452-2] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
|
40
|
WANG B, ZHANG N, WANG X, PARK SR, WEIR MD, OATES TW, XU HHK, BAI Y. Novel self-etch adhesive with antibacterial and protein-repellent functions to prevent enamel demineralization. Dent Mater J 2018; 37:904-911. [DOI: 10.4012/dmj.2017-422] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Affiliation(s)
- Bo WANG
- Department of Orthodontics, School of Stomatology, Capital Medical University
- Department of Orthodontics, The First Affiliated Hospital of Dalian Medical University
| | - Ning ZHANG
- Department of Orthodontics, School of Stomatology, Capital Medical University
| | - Xiaomeng WANG
- Department of Orthodontics, School of Stomatology, Capital Medical University
| | - Soo Ro PARK
- Department of Orthodontics, School of Stomatology, Capital Medical University
| | - Michael D. WEIR
- Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School
| | - Thomas W. OATES
- Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School
| | - Hockin H. K. XU
- Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School
- Center for Stem Cell Biology & Regenerative Medicine, University of Maryland School of Medicine
- Marlene and Stewart Greenebaum Cancer Center, University of Maryland School of Medicine
- Department of Mechanical Engineering, University of Maryland
| | - Yuxing BAI
- Department of Orthodontics, School of Stomatology, Capital Medical University
| |
Collapse
|
41
|
Cai Q, Yang S, Zhang C, Li Z, Li X, Shen Z, Zhu W. Facile and Versatile Modification of Cotton Fibers for Persistent Antibacterial Activity and Enhanced Hygroscopicity. ACS APPLIED MATERIALS & INTERFACES 2018; 10:38506-38516. [PMID: 30360113 DOI: 10.1021/acsami.8b14986] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Natural fibers with functionalities have attracted considerable attention. However, developing facile and versatile strategies to modify natural fibers is still a challenge. In this study, cotton fibers, the most widely used natural fibers, were partially oxidized by sodium periodate in aqueous solution, to give oxidized cotton fibers containing multiple aldehyde groups on their surface. Then poly(hexamethylene guanidine) was chemically grafted onto the oxidized cotton fibers forming Schiff bases between the terminal amines of poly(hexamethylene guanidine) and the aldehyde groups of oxidized cotton fibers. Finally, carbon-nitrogen double bonds were reduced by sodium cyanoborohydride, to bound poly(hexamethylene guanidine) covalently to the surface of cotton fibers. These functionalized fibers show strong and persistent antibacterial activity: complete inhibition against Escherichia coli and Staphylococcus aureus was maintained even after 1000 consecutive washing in distilled water. On the other hand, cotton fibers with only physically adsorbed poly(hexamethylene guanidine) lost their antibacterial activity entirely after a few washes. According to Cell Counting Kit-8 assay and hemolytic analysis, toxicity did not significantly increase after chemical modification. Attributing to the hydrophilicity of poly(hexamethylene guanidine) coatings, the modified cotton fibers were also more hygroscopic compared to untreated cotton fibers, which can improve the comfort of the fabrics made of modified cotton fibers. This study provides a facile and versatile strategy to prepare modified polysaccharide natural fibers with durable antibacterial activity, biosecurity, and comfortable touch.
Collapse
Affiliation(s)
- Qiuquan Cai
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , People's Republic of China
| | - Shuliang Yang
- Department of Oral and Maxillofacial Surgery, Affiliated Stomatology Hospital, School of Medicine , Zhejiang University , Hangzhou 310006 , China
| | - Chao Zhang
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , People's Republic of China
| | - Zimeng Li
- Department of Oral and Maxillofacial Surgery, Affiliated Stomatology Hospital, School of Medicine , Zhejiang University , Hangzhou 310006 , China
| | - Xiaodong Li
- Department of Oral and Maxillofacial Surgery, Affiliated Stomatology Hospital, School of Medicine , Zhejiang University , Hangzhou 310006 , China
| | - Zhiquan Shen
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , People's Republic of China
| | - Weipu Zhu
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , People's Republic of China
- Key Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang Province , Hangzhou 310027 , China
| |
Collapse
|
42
|
Modeling of Structure-Property Relationships of Polymerizable Surfactants with Antimicrobial Activity. APPLIED SCIENCES-BASEL 2018. [DOI: 10.3390/app8101972] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Polymerizable quaternary ammonium salts (PQASs) were synthesized in a previous work and some of them were used as surfactants in the antimicrobial coating of commercial membranes. Herein, the electrostatic charges, maximum length, and aspect ratio of these antibacterial surfactants were calculated with the aim of investigating the relationship between the properties, recognized to control the biocidal activity of these molecules, and the molecular structures. The effect of the water molecules was considered through a quantum and molecular mechanics approach. The correlation between the number of carbons in the main aliphatic chain of PQAS and the above properties was investigated, by finding that the net charge on the ammonium group does not increase as the number of carbons in the aliphatic chain increase. Thus, although this number influences the antibacterial activity of the surfactants, this influence is not correlated with an increase of the ammonium positive charge. Unlike the partial charges, a different trend was obtained for the surfactants’ maximum length and aspect ratio in agreement with the experimental behavior. As this modeling does not use empirical or adjustable parameters, it can assist the synthetic plan of new structures for surface functionalization, in order to improve the biofouling resistance of the membranes.
Collapse
|
43
|
Kocak G, Cicek H, Ceylan Ö, Bütün V. Antimicrobial and anti-quorum-sensing properties and paint film usage of novel diazaborine-based copolymers. J Appl Polym Sci 2018. [DOI: 10.1002/app.46907] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
Affiliation(s)
- Gökhan Kocak
- Department of Chemistry; Adiyaman University; Adiyaman 02040 Turkey
| | - Hüseyin Cicek
- Department of Chemistry; Mugla Sitki Kocman University; Mugla 48000 Turkey
| | - Özgür Ceylan
- Food Quality Control and Analysis Program, Ula Ali Kocman Vocational School; Mugla Sitki Kocman University; Mugla 48147 Turkey
| | - Vural Bütün
- Department of Chemistry; Eskisehir Osmangazi University; Eskisehir 26480 Turkey
| |
Collapse
|
44
|
Manouchehri F, Sadeghi B, Najafi F, Mosslemin MH, Niakan M. Synthesis and characterization of novel polymerizable bis-quaternary ammonium dimethacrylate monomers with antibacterial activity as an efficient adhesive system for dental restoration. Polym Bull (Berl) 2018. [DOI: 10.1007/s00289-018-2414-y] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
45
|
Zhang N, Zhang K, Weir MD, Xu DJ, Reynolds MA, Bai Y, Xu HHK. Effects of water-aging for 6 months on the durability of a novel antimicrobial and protein-repellent dental bonding agent. Int J Oral Sci 2018; 10:18. [PMID: 29925870 PMCID: PMC6010414 DOI: 10.1038/s41368-018-0019-9] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/21/2016] [Revised: 04/27/2017] [Accepted: 08/01/2017] [Indexed: 12/02/2022] Open
Abstract
Biofilms at the tooth-restoration bonded interface can produce acids and cause recurrent caries. Recurrent caries is a primary reason for restoration failures. The objectives of this study were to synthesize a novel bioactive dental bonding agent containing dimethylaminohexadecyl methacrylate (DMAHDM) and 2-methacryloyloxyethyl phosphorylcholine (MPC) to inhibit biofilm formation at the tooth-restoration margin and to investigate the effects of water-aging for 6 months on the dentin bond strength and protein-repellent and antibacterial durability. A protein-repellent agent (MPC) and antibacterial agent (DMAHDM) were added to a Scotchbond multi-purpose (SBMP) primer and adhesive. Specimens were stored in water at 37 °C for 1, 30, 90, or 180 days (d). At the end of each time period, the dentin bond strength and protein-repellent and antibacterial properties were evaluated. Protein attachment onto resin specimens was measured by the micro-bicinchoninic acid approach. A dental plaque microcosm biofilm model was used to test the biofilm response. The SBMP + MPC + DMAHDM group showed no decline in dentin bond strength after water-aging for 6 months, which was significantly higher than that of the control (P < 0.05). The SBMP + MPC + DMAHDM group had protein adhesion that was only 1/20 of that of the SBMP control (P < 0.05). Incorporation of MPC and DMAHDM into SBMP provided a synergistic effect on biofilm reduction. The antibacterial effect and resistance to protein adsorption exhibited no decrease from 1 to 180 d (P > 0.1). In conclusion, a bonding agent with MPC and DMAHDM achieved a durable dentin bond strength and long-term resistance to proteins and oral bacteria. The novel dental bonding agent is promising for applications in preventive and restorative dentistry to reduce biofilm formation at the tooth-restoration margin.
Collapse
Affiliation(s)
- Ning Zhang
- Department of Orthodontics, School of Stomatology, Capital Medical University, Beijing, China
- Biomatexrials & Tissue Engineering Division, Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School, Baltimore, MD, USA
| | - Ke Zhang
- Department of Orthodontics, School of Stomatology, Capital Medical University, Beijing, China.
- Biomatexrials & Tissue Engineering Division, Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School, Baltimore, MD, USA.
| | - Michael D Weir
- Biomatexrials & Tissue Engineering Division, Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School, Baltimore, MD, USA
| | - David J Xu
- Biomatexrials & Tissue Engineering Division, Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School, Baltimore, MD, USA
| | - Mark A Reynolds
- Biomatexrials & Tissue Engineering Division, Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School, Baltimore, MD, USA
| | - Yuxing Bai
- Department of Orthodontics, School of Stomatology, Capital Medical University, Beijing, China.
| | - Hockin H K Xu
- Biomatexrials & Tissue Engineering Division, Department of Endodontics, Periodontics and Prosthodontics, University of Maryland Dental School, Baltimore, MD, USA.
- Center for Stem Cell Biology & Regenerative Medicine, University of Maryland School of Medicine, Baltimore, MD, USA.
- Marlene and Stewart Greenebaum Cancer Center, University of Maryland School of Medicine, Baltimore, MD, USA.
- Department of Mechanical Engineering, University of Maryland, Baltimore County, MD, USA.
| |
Collapse
|
46
|
Makvandi P, Jamaledin R, Jabbari M, Nikfarjam N, Borzacchiello A. Antibacterial quaternary ammonium compounds in dental materials: A systematic review. Dent Mater 2018; 34:851-867. [PMID: 29678327 DOI: 10.1016/j.dental.2018.03.014] [Citation(s) in RCA: 176] [Impact Index Per Article: 29.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/14/2017] [Revised: 03/20/2018] [Accepted: 03/23/2018] [Indexed: 01/12/2023]
Abstract
OBJECTIVE Quaternary ammonium compounds (QACs) represent one of the most effective classes of disinfectant agents in dental materials and resin nanocomposites. This reviews aims to give a wide overview on the research in the field of antibacterial QACs in dental materials and nanocomposites. METHOD An introduction to dental materials components as well as the microorganisms and methods of evaluation for the antimicrobial assays are presented. Then, the properties and synthesis route of QACs, as monomer and filler, are shown. Finally, antimicrobial monomers and fillers, specifically those contain quaternary ammonium salts (QASs), in dental materials are reviewed. RESULTS QACs have been used as monomer and micro/nanofiller in restorative dentistry. They possess one or more methacrylate functional groups to participate in polymerization reactions. QACs with multiple methacrylate groups can also be used as crosslinking agents. Furthermore, QACs with chain length from ∼12 to 16 have higher antimicrobial activity in cured dental resins. In general, increasing the chain length leads to a threshold value (critical point) and then it causes decrease in the antimicrobial activity. SIGNIFICANCE The current state of the art of dental materials and resin nanocomposites includes a wide variety of antimicrobial materials. Among them, QACs presents low cytotoxicity and excellent long-term antimicrobial activity without leaching out over time.
Collapse
Affiliation(s)
- Pooyan Makvandi
- Institute for Polymers, Composites and Biomaterials (IPCB), National Research Council (CNR), Naples, Italy; Institute for Advanced Studies in Basic Sciences, Zanjan, Iran.
| | - Rezvan Jamaledin
- Center for Advanced Biomaterials for Health Care, Istituto Italiano di Tecnologia (IIT@CRIB), Napels, Italy
| | - Mostafa Jabbari
- Swedish Centre for Resource Recovery, University of Borås, Borås SE-50190, Sweden
| | | | - Assunta Borzacchiello
- Institute for Polymers, Composites and Biomaterials (IPCB), National Research Council (CNR), Naples, Italy.
| |
Collapse
|
47
|
Al-Dulaijan YA, Cheng L, Weir MD, Melo MAS, Liu H, Oates TW, Wang L, Xu HHK. Novel rechargeable calcium phosphate nanocomposite with antibacterial activity to suppress biofilm acids and dental caries. J Dent 2018. [PMID: 29526668 DOI: 10.1016/j.jdent.2018.03.003] [Citation(s) in RCA: 48] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023] Open
Abstract
OBJECTIVE Rechargeable calcium phosphate (CaP) composites were developed recently. However, none of the rechargeable CaP composites was antibacterial. The objectives of this study were to develop the first rechargeable CaP composite that was antibacterial, and to investigate the effects of adding dimethylaminohexadecyl methacrylate (DMAHDM) into rechargeable CaP composite on ion rechargeability and re-release as well as biofilm properties. METHODS DMAHDM was synthesized via a Menschutkin reaction. Nanoparticles of amorphous calcium phosphate (NACP) were synthesized using a spray-drying technique. The resin contained ethoxylated bisphenol A dimethacrylate (EBPADMA) and pyromellitic glycerol dimethacrylate (PMGDM). Two composites were fabricated: rechargeable NACP composite, and rechargeable NACP-DMAHDM composite. Mechanical properties and ion release and recharge were measured. A dental plaque microcosm biofilm model using saliva was tested. RESULTS Flexural strength and elastic modulus of rechargeable NACP and NACP-DMAHDM composites matched commercial control composite (p > 0.1). NACP-DMAHDM inhibited biofilm metabolic activity and lactic acid, and reduced biofilm colony-forming units (CFU) by 3-4 log. NACP and NACP-DMAHDM showed similar Ca and P ion recharge and re-release (p > 0.1). Therefore, adding DMAHDM did not compromise the ion rechargeability. One recharge yielded continuous release for 42 d. The release was maintained at the same level with increasing number of recharge cycles, indicating long-term ion release and remineralization capability. CONCLUSIONS The first CaP rechargeable and antibacterial composite was developed. Adding DMAHDM into the rechargeable NACP composite did not adversely affect the Ca and P ion release and recharge, and the composite had much less biofilm growth and lactic acid production, with CFU reduction by 3-4 log. CLINICAL SIGNIFICANCE This novel CaP rechargeable composite with long-term remineralization and antibacterial properties is promising for tooth restorations to inhibit caries.
Collapse
Affiliation(s)
- Yousif A Al-Dulaijan
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA; Department of Substitutive Dental Sciences, College of Dentistry, Imam Abdulrahman bin Faisal University, Dammam, Saudi Arabia
| | - Lei Cheng
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA; State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
| | - Michael D Weir
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA
| | - Mary Anne S Melo
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA
| | - Huaibing Liu
- L.D. Caulk Division, Dentsply Sirona Restorative, Milford, DE 19963, USA
| | - Thomas W Oates
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA
| | - Lin Wang
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA; VIP Integrated Department, Stomatological Hospital of Jilin University, Changchun, China.
| | - Hockin H K Xu
- Department of Advanced Oral Sciences and Therapeutics, University of Maryland School of Dentistry, Baltimore, MD 21201, USA; Center for Stem Cell Biology & Regenerative Medicine, University of Maryland School of Medicine, Baltimore, MD 21201, USA; Marlene and Stewart Greenebaum Cancer Center, University of Maryland School of Medicine, Baltimore, MD 21201, USA.
| |
Collapse
|
48
|
Lin J, Chen X, Chen C, Hu J, Zhou C, Cai X, Wang W, Zheng C, Zhang P, Cheng J, Guo Z, Liu H. Durably Antibacterial and Bacterially Antiadhesive Cotton Fabrics Coated by Cationic Fluorinated Polymers. ACS APPLIED MATERIALS & INTERFACES 2018; 10:6124-6136. [PMID: 29356496 DOI: 10.1021/acsami.7b16235] [Citation(s) in RCA: 186] [Impact Index Per Article: 31.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
Considerable attention has been devoted to producing antibacterial fabrics due to their very wide applications in medicine, hygiene, hospital, etc. However, the poor antibacterial durability and bad bacterial antiadhesion capacity of most existing antibacterial fabrics limit their applications. In this work, a series of antibacterial and polymeric quaternary ammonium monomers with different alkyl chain length were successfully synthesized to copolymerize with fluorine-containing and other acrylic monomers to generate cationic fluorinated polymer emulsions and durably antibacterial and bacterially antiadhesive cotton fabrics. The relation between antibacterial constituent and its antibacterial activity was investigated. The study indicated that the alkyl chain length and contents of the antibacterial monomers, as well as the add-on percentage of polymer greatly influenced the antibacterial activities of the fabrics. In addition, it was found that incorporation of fluorine component into the polymer greatly enhanced the antibacterial activity and bacterial antiadhesion of the treated fabrics due to the low surface energy induced hydrophobicity. Finally, antibacterial and antiadhesive models of action of the obtained fabrics were illustrated.
Collapse
Affiliation(s)
- Jing Lin
- School of Chemistry and Chemical Engineering, Guangzhou University , Guangzhou 510006, P. R. China
| | - XiaoYu Chen
- School of Chemistry and Chemical Engineering, Guangzhou University , Guangzhou 510006, P. R. China
| | - ChunYan Chen
- School of Chemistry and Chemical Engineering, Guangzhou University , Guangzhou 510006, P. R. China
| | - JieTao Hu
- School of Chemistry and Chemical Engineering, Guangzhou University , Guangzhou 510006, P. R. China
| | - CaiLong Zhou
- School of Chemistry and Chemical Engineering, South China University of Technology , Guangzhou 510640, P. R. China
| | - XianFang Cai
- School of Chemistry and Chemical Engineering, Guangzhou University , Guangzhou 510006, P. R. China
| | - Wei Wang
- School of Chemistry and Chemical Engineering, Guangzhou University , Guangzhou 510006, P. R. China
| | - Cheng Zheng
- School of Chemistry and Chemical Engineering, Guangzhou University , Guangzhou 510006, P. R. China
| | - PeiPei Zhang
- Department of Bioengineering, University of Maryland at College Park , College Park, Maryland 20742, United States
| | - Jiang Cheng
- School of Chemistry and Chemical Engineering, South China University of Technology , Guangzhou 510640, P. R. China
| | - ZhanHu Guo
- Integrated Composites Laboratory (ICL), Department of Chemical and Biomolecular Engineering, University of Tennessee , Knoxville, Tennessee 37996, United States
| | - Hu Liu
- National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University , Zhengzhou, Henan 450002, P. R. China
| |
Collapse
|
49
|
Cicek H, Kocak G, Ceylan Ö, Kutluca EA, Dikmen Z, Bütün V. Antibacterial poly{(4-vinyl phenylboronic acid)-co-[2-(dimethylamino)ethyl methacrylate]} copolymers and their application in water-based paints. J Appl Polym Sci 2018. [DOI: 10.1002/app.46245] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Affiliation(s)
- Hüseyin Cicek
- Department of Chemistry, Faculty of Sciences; Mugla Sitki Kocman University; Mugla 48000 Turkey
| | - Gökhan Kocak
- Department of Chemistry; Eskisehir Osmangazi University; Eskisehir 26480 Turkey
- Department of Chemistry; Adiyaman University; Adiyaman 02040 Turkey
| | - Özgür Ceylan
- Food Quality Control and Analysis Program; Ula Ali Kocman Vocational School, Mugla Sitki Kocman University; Mugla 48147 Turkey
| | - Emir Ahmet Kutluca
- Department of Chemistry, Faculty of Sciences; Mugla Sitki Kocman University; Mugla 48000 Turkey
| | - Zeynep Dikmen
- Department of Polymer Science and Technology; Eskisehir Osmangazi University; Eskisehir 26480 Turkey
| | - Vural Bütün
- Department of Chemistry; Eskisehir Osmangazi University; Eskisehir 26480 Turkey
- Department of Polymer Science and Technology; Eskisehir Osmangazi University; Eskisehir 26480 Turkey
| |
Collapse
|
50
|
Magnetic Nanoparticles Coated with a Thermosensitive Polymer with Hyperthermia Properties. Polymers (Basel) 2017; 10:polym10010010. [PMID: 30966044 PMCID: PMC6415002 DOI: 10.3390/polym10010010] [Citation(s) in RCA: 41] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2017] [Revised: 12/12/2017] [Accepted: 12/19/2017] [Indexed: 11/16/2022] Open
Abstract
Magnetic nanoparticles (MNPs) have been widely used to increase the efficacy of chemotherapeutics, largely through passive accumulation provided by the enhanced permeability and retention effect. Their incorporation into biopolymer coatings enables the preparation of magnetic field-responsive, biocompatible nanoparticles that are well dispersed in aqueous media. Here we describe a synthetic route to prepare functionalized, stable magnetite nanoparticles (MNPs) coated with a temperature-responsive polymer, by means of the hydrothermal method combined with an oil/water (o/w) emulsion process. The effects of both pH and temperature on the electrophoretic mobility and surface charge of these MNPs are investigated. The magnetite/polymer composition of these systems is detected by Fourier Transform Infrared Spectroscopy (FTIR) and quantified by thermogravimetric analysis. The therapeutic possibilities of the designed nanostructures as effective heating agents for magnetic hyperthermia are demonstrated, and specific absorption rates as high as 150 W/g, with 20 mT magnetic field and 205 kHz frequency, are obtained. This magnetic heating response could provide a promising nanoparticle system for combined diagnostics and cancer therapy.
Collapse
|