Non-Covalent Derivatives: Cocrystals and Eutectics

Therapeutic Deep Eutectic Solvents: A Comprehensive Review of Their Thermodynamics, Microstructure and Drug Delivery Applications

Deep eutectic solvents (DES) are multicomponent liquids that are usually formed by coupling a hydrogen bond donor and acceptor leading to strong non-covalent (NC) intermolecular networking and profound depression in the melting point of the system. Pharmaceutically, this phenomenon has been exploited to improve drugs' physicochemical properties, with an established DES therapeutic subcategory, therapeutic deep eutectic solvents (THEDES). THEDES preparation is usually via straightforward synthetic processes with little involvement of sophisticated techniques, which, in addition to its thermodynamic stability, make these multi-component molecular adducts a very attractive alternative for drug enabling purposes. Other NC bonded binary systems (e.g., co-crystals and ionic liquids) are utilized in the pharmaceutical field for enhancing drug's behaviours. However, a clear distinction between these systems and THEDES is scarcely discussed in the current literature. Accordingly, this review provides a structure-based categorization for DES formers, a discussion of its thermodynamic properties and phase behaviour, and it clarifies the physicochemical and microstructure boundaries between DES and other NC systems. Additionally, a summary of its preparation techniques and their experimental conditions preparation is supplied. Instrumental analysis techniques can be used to characterize and differentiate DES from other NC mixtures, hence this review draws a road map to for this purpose. Since this work mainly focuses on pharmaceutical applications of DES, all types of THEDES including the highly discussed types (conventional, drugs dissolved in DES and polymer based) in addition to the less discussed categories are covered. Finally, the regulatory status of THEDES was investigated despite the current unclear situation.

Cocrystals; basic concepts, properties and formation strategies

Cocrystallization is an old technique and remains the focus of several research groups working in the field of Chemistry and Pharmacy. This technique is basically in field for improving physicochemical properties of material which can be active pharmaceutical ingredients (APIs) or other chemicals with poor profile. So this review article has been presented in order to combine various concepts for scientists working in the field of chemistry, pharmacy or crystal engineering, also it was attempt to elaborate concepts belonging to crystal designing, their structures and applications. A handsome efforts have been made to bring scientists together working in different fields and to make chemistry easier for a pharmacist and pharmacy for chemists pertaining to cocrystals. Various aspects of chemicals being used as co-formers have been explored which predict the formation of co-crystals or molecular salts and even inorganic cocrystals.

Formation of a Stable Co-Amorphous System for a Brick Dust Molecule by Utilizing Sodium Taurocholate with High Glass Transition Temperature

Brick dust molecules are usually poorly soluble in water and lipoidal components, making it difficult to formulate them in dosage forms that provide efficient pharmacological effects. A co-amorphous system is an effective strategy to resolve these issues. However, their glass transition temperatures (Tg) are relatively lower than those of polymeric amorphous solid dispersions, suggesting the instability of the co-amorphous system. This study aimed to formulate a stable co-amorphous system for brick dust molecules by utilizing sodium taurocholate (NaTC) with a higher Tg. A novel neuropeptide Y5 receptor antagonist (AntiY5R) and NaTC with Tg of 155 °C were used as the brick dust model and coformer, respectively. Ball milling formed a co-amorphous system for AntiY5R and NaTC (AntiY5R-NaTC) at various molar ratios. Deviation from the theoretical Tg value and peak shifts in Fourier-transform infrared spectroscopy indicated intermolecular interactions between AntiY5R and NaTC. AntiY5R-NaTC at equal molar ratios resulting in an 8.5-fold increase in AntiY5R solubility over its crystalline form. The co-amorphous system remained amorphous for 1 month at 25 °C and 40 °C. These results suggest that the co-amorphous system formed by utilizing NaTC as a coformer could stably maintain the amorphous state and enhance the solubility of brick dust molecules.

Mechanical Activation by Ball Milling as a Strategy to Prepare Highly Soluble Pharmaceutical Formulations in the Form of Co-Amorphous, Co-Crystals, or Polymorphs

Almost half of orally administered active pharmaceutical ingredients (APIs) have low solubility, which affects their bioavailability. In the last two decades, several alternatives have been proposed to modify the crystalline structure of APIs to improve their solubility; these strategies consist of inducing supramolecular structural changes in the active pharmaceutical ingredients, such as the amorphization and preparation of co-crystals or polymorphs. Since many APIs are thermosensitive, non-thermal emerging alternative techniques, such as mechanical activation by milling, have become increasingly common as a preparation method for drug formulations. This review summarizes the recent research in preparing pharmaceutical formulations (co-amorphous, co-crystals, and polymorphs) through ball milling to enhance the physicochemical properties of active pharmaceutical ingredients. This report includes detailed experimental milling conditions (instrumentation, temperature, time, solvent, etc.), as well as solubility, bioavailability, structural, and thermal stability data. The results and description of characterization techniques to determine the structural modifications resulting from transforming a pure crystalline API into a co-crystal, polymorph, or co-amorphous system are presented. Additionally, the characterization methodologies and results of intermolecular interactions induced by mechanical activation are discussed to explain the properties of the pharmaceutical formulations obtained after the ball milling process.

Lopinavir-menthol co-crystals for enhanced dissolution rate and intestinal absorption

Lopinavir is an antiretroviral, antiparasitic agent and recently utilized in treatment of COVID-19. Unfortunately, lopinavir exhibited poor oral bioavailability due to poor dissolution, extensive pre-systemic metabolism, and significant P-glycoprotein intestinal efflux. Accordingly, the aim was to enhance dissolution rate and intestinal absorption of lopinavir. This employed co-processing with menthol which is believed to modify crystalline structures and inhibit intestinal efflux. Lopinavir was mixed with menthol at different molar ratios before ethanol assisted kneading. Formulations were evaluated using FTIR spectroscopy, differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) and dissolution studies. Optimum ratio was utilized to assess lopinavir intestinal permeability. This employed in situ rabbit intestinal perfusion technique. FTIR, DSC and XRD indicated formation of lopinavir-menthol co-crystals at optimum molar ratio of 1:2. Additional menthol underwent phase separation due to possible self-association. Co-crystallization significantly enhanced lopinavir dissolution rate compared with pure drug to increase the dissolution efficiency from 24.96% in case of unprocessed lopinavir to 91.43% in optimum formulation. Lopinavir showed incomplete absorption from duodenum and jejuno-iliac segments with lower absorptive clearance from jejuno-ileum reflecting P-gp efflux. Co-perfusion with menthol increased lopinavir intestinal permeability. The study introduced menthol as co-crystal co-former for enhanced dissolution and augmented intestinal absorption of lopinavir.

Robust Formation of Discrete Non-Covalent Pyrene Dimers in Amorphous Film by Strong π–π Interaction

Pyrene-based non-covalent dimer in a crystal shows strengthened π–π interaction, which is robust enough against external disturbances. Such a strong π–π interaction makes pyrene-based dimer easily formed in amorphous film,...

Novel Co-crystals and Eutectics of Febuxostat: Characterization, Mechanism of Formation, and Improved Dissolution

Co-crystallization studies were undertaken to improve the solubility of a highly water-insoluble drug febuxostat (FXT), used in the treatment of gout and hyperuricemia. The selection of co-crystal former (CCF) molecules such as 1-hydroxy 2-naphthoic acid (1H-2NPH), 4-hydroxy benzoic acid (4-HBA), salicylic acid (SAC), 5-nitro isophthalic acid (5-NPH), isonicotinamide (ISNCT), and picolinamide (PICO) was based on the presence of complementary functional groups capable of forming hydrogen bond and the ΔpK_a difference between FXT and CCF. A liquid-assisted grinding (LAG) method was successfully employed for the rapid screening of various pharmaceutical adducts. These adducts were characterized based on their unique thermal (differential scanning calorimetry) and spectroscopic (Fourier transform infrared and Raman spectroscopy) profiles. Binary phase diagrams (BPD) were plotted to establish a relationship between the thermal events and adduct formed. Powder X-ray diffraction (PXRD) studies were carried out to confirm the formation of eutectic/co-crystal. Thermogravimetric analysis (TGA) was also performed for the novel co-crystals obtained. The propensity for strong homo-synthons over weak hetero-synthons and strong hetero-synthons over weak homo-synthons during supramolecular growth resulted in the formation of eutectics and co-crystals respectively. FXT:1H-2NPH (1), FXT:4-HBA (1), FXT:SAC (1, 2), and FXT:5-NPH (2-1) gave rise to pure eutectic systems, while FXT:ISNCT (2-1) and FXT:PICO (1) gave rise to novel co-crystals with characteristic DSC heating curves and PXRD pattern. Additionally, the impact of microenvironmental pH and microspeciation profile on the improved dissolution profile of the co-crystals was discussed. Graphical Abstract.

Engineering a Remedy to Modulate and Optimize Biopharmaceutical Properties of Rebamipide by Synthesizing New Cocrystal: In Silico and Experimental Studies

PURPOSE

Rebamipide (REB) a potent anti-ulcer agent, has not been exploited to its full potential, owing to it extremely poor solubility, leading to highly diminutive bioavailability (<10%). The purpose is to carry out its solid-state modification.

METHOD

Cocrystallisation was done with three GRAS coformers namely citric acid (CA), 3,4-dihydroxybenzoic acid (DHBA) and oxalic acid (OXA) employing the liquid-assisted grinding method. Cocrystal formation was based upon amide-carboxyl and amide-hydroxyl supramolecular synthons. Characterization of novel cocrystals i.e. RCA, RDHBA and ROXA was carried out by DSC, PXRD and additionally by FT-IR spectroscopy. Chemical structures have been determined utilizing the PXRD pattern by Material Studio®. Furthermore, cocrystals were subjected to solubility and intrinsic dissolution rate (IDR) evaluation. Also, pharmacodynamic and pharmacokinetic studies were performed and compared with pure rebamipide.

RESULT

The appearances of a single sharp melting endotherm in DSC, along with novel characteristic peaks in PXRD infer the existence of a new crystalline form. Shifting in characteristic vibrations in FT-IR spectroscopy supports the establishment of distinct hydrogen-bonded networks. Structural determination revealed that RCA crystallizes in 'Bb2b' space groups whereas RDHBA in 'P1' and ROXA crystallize out in the 'P-1' space group. All the cocrystals exhibited superior apparent solubility and almost 7-13 folds increase in IDR. Furthermore, 1.6-2.5 folds enhancement in relative bioavailability and remarkable amplification in anti-ulcer, anti-inflammatory and the antioxidant potential of these cocrystals were observed.

CONCLUSION

The study ascertains the advantages of cocrystallization, with RCA showing greatest potential and suggests a viable alternative approach for improved formulation of rebamipide.

Synthesis, Characterization, and Intrinsic Dissolution Studies of Drug-Drug Eutectic Solid Forms of Metformin Hydrochloride and Thiazide Diuretics

The mechanochemical synthesis of drug–drug solid forms containing metformin hydrochloride (MET·HCl) and thiazide diuretics hydrochlorothiazide (HTZ) or chlorothiazide (CTZ) is reported. Characterization of these new systems indicates formation of binary eutectic conglomerates, i.e., drug–drug eutectic solids (DDESs). Further analysis by construction of binary diagrams (DSC screening) exhibited the characteristic V-shaped form indicating formation of DDESs in both cases. These new DDESs were further characterized by different techniques, including thermal analysis (DSC), solid state NMR spectroscopy (SSNMR), powder X-ray diffraction (PXRD) and scanning electron microscopy–energy dispersive X-ray spectroscopy analysis (SEM–EDS). In addition, intrinsic dissolution rate experiments and solubility assays were performed. In the case of MET·HCl-HTZ (χ_MET·HCl = 0.66), we observed a slight enhancement in the dissolution properties compared with pure HTZ (1.21-fold). The same analysis for the solid forms of MET·HCl-CTZ (χ_MET·HCl = 0.33 and 0.5) showed an enhancement in the dissolved amount of CTZ accompanied by a slight improvement in solubility. From these dissolution profiles and saturation solubility studies and by comparing the thermodynamic parameters (ΔH_fus and ΔS_fus) of the pure drugs with these new solid forms, it can be observed that there was a limited modification in these properties, not modifying the free energy of the solution (ΔG) and thus not allowing an improvement in the dissolution and solubility properties of these solid forms.

Recent Advances in Pharmaceutical Cocrystals: From Bench to Market

The pharmacokinetics profile of active pharmaceutical ingredients (APIs) in the solid pharmaceutical dosage forms is largely dependent on the solid-state characteristics of the chemicals to understand the physicochemical properties by particle size, size distribution, surface area, solubility, stability, porosity, thermal properties, etc. The formation of salts, solvates, and polymorphs are the conventional strategies for altering the solid characteristics of pharmaceutical compounds, but they have their own limitations. Cocrystallization approach was established as an alternative method for tuning the solubility, permeability, and processability of APIs by introducing another compatible molecule/s into the crystal structure without affecting its therapeutic efficacy to successfully develop the formulation with the desired pharmacokinetic profile. In the present review, we have grossly focused on cocrystallization, particularly at different stages of development, from design to production. Furthermore, we have also discussed regulatory guidelines for pharmaceutical industries and challenges associated with the design, development and production of pharmaceutical cocrystals with commercially available cocrystal-based products.

Deep eutectic systems: An overview of fundamental aspects, current understanding and drug delivery applications

The deep eutectic system (DES) is a relatively new concept in the field of drug delivery science. DES is a class of eutectic mixtures comprised of two or more components, with a eutectic point far below than the melting temperature of the pure components. The strong hydrogen bonding interactions between DES constituents are responsible for significant lowering of melting point in DES. A significant number of molecules cannot reach from drug discovery phase to drug development phase because of poor biopharmaceutical attributes, such as solubility and permeability. DES can be a novel alternative to overcome these issues. In last few years DESs have been widely used in different pharmaceutical and chemical processes. However, comprehensive information regarding their drug delivery potential is not available. This review deals with fundamental aspects such as types, preparation, thermodynamics, toxicity, biodegradability and their applications in the field of drug delivery. Current challenges, future prospects and translational aspects of DES as drug delivery system have also been discussed.

Coupling complementary strategy to flexible graph neural network for quick discovery of coformer in diverse co-crystal materials

Cocrystal engineering have been widely applied in pharmaceutical, chemistry and material fields. However, how to effectively choose coformer has been a challenging task on experiments. Here we develop a graph neural network (GNN) based deep learning framework to quickly predict formation of the cocrystal. In order to capture main driving force to crystallization from 6819 positive and 1052 negative samples reported by experiments, a feasible GNN framework is explored to integrate important prior knowledge into end-to-end learning on the molecular graph. The model is strongly validated against seven competitive models and three challenging independent test sets involving pharmaceutical cocrystals, π-π cocrystals and energetic cocrystals, exhibiting superior performance with accuracy higher than 96%, confirming its robustness and generalization. Furthermore, one new energetic cocrystal predicted is successfully synthesized, showcasing high potential of the model in practice. All the data and source codes are available at https://github.com/Saoge123/ccgnet for aiding cocrystal community.

Mechanochemistry: A Green Approach in the Preparation of Pharmaceutical Cocrystals

Mechanochemistry is considered an alternative attractive greener approach to prepare diverse molecular compounds and has become an important synthetic tool in different fields (e.g., physics, chemistry, and material science) since is considered an ecofriendly procedure that can be carried out under solvent free conditions or in the presence of minimal quantities of solvent (catalytic amounts). Being able to substitute, in many cases, classical solution reactions often requiring significant amounts of solvents. These sustainable methods have had an enormous impact on a great variety of chemistry fields, including catalysis, organic synthesis, metal complexes formation, preparation of multicomponent pharmaceutical solid forms, etc. In this sense, we are interested in highlighting the advantages of mechanochemical methods on the obtaining of pharmaceutical cocrystals. Hence, in this review, we describe and discuss the relevance of mechanochemical procedures in the formation of multicomponent solid forms focusing on pharmaceutical cocrystals. Additionally, at the end of this paper, we collect a chronological survey of the most representative scientific papers reporting the mechanochemical synthesis of cocrystals.

Emerging Multi-Drug Eutectics: Opportunities and Challenges

Complexity and heterogeneous nature of most diseases have posed greater challenges in the modern healthcare system. Fixed-dose combination can offer an ideal way to improve patient compliance and higher therapeutic efficacy. However, biopharmaceutical issues associated with the drug combinations remain unaddressed. Multidrug eutectics (MDE) have demonstrated significant promise in improving the biopharmaceutical attributes with synergistic therapeutic action. Eutectic mixtures are the multicomponent solid forms that possess lesser melting point than the individual components at a fixed composition. Non-covalent linking of drug combinations as MDE is an innovative strategy with enhanced solubility, dissolution, and mechanical and potential therapeutic efficacy. This review provides a comprehensive overview of the design of MDE, rational selection of drugs, characterization tools, and their therapeutic potential. Besides, the futuristic perspective where MDE could make a significant impact on combination therapy is briefly outlined. Graphical Abstract.

Curcumin Loaded and Co-loaded Nanosystems: A Review from a Biological Activity Enhancement Perspective

BACKGROUND

Curcumin is a natural phenolic compound exhibiting multiple bioactivities that have been evaluated in vitro, in vivo as well as through clinical studies in humans. Some of them include antimicrobial, antioxidant, anti-inflammatory, and central nervous system protective effects. Further, curcumin is generally recognized as a safe substance because of its low toxicity. However, its molecular structure is susceptible to changes in pH, oxidation, photodegradation, low aqueous solubility, and biotransformation compromising its bioavailability; these drawbacks are successfully addressed through nanotechnology.

OBJECTIVE

The present review systematizes findings on the enhancement of curcumin's beneficial effects when it is loaded and co-loaded into different types of nanosystems covering liposomes, polymeric and solid-lipid nanoparticles, nanostructured lipid carrier, lipid-polymeric hybrids, self- -assembled and protein-based core-shell systems in relation to its antimicrobial, antioxidant, anti-inflammatory and central nervous system protective bioactivities.

CONCLUSION

Curcumin is a versatile molecule capable of exerting antimicrobial, antioxidant, anti- inflammatory, and central nervous system protective effects in an enhanced manner using the possibilities offered by the nanotechnology-based approach. Its enhanced bioactivities are associated with increments in solubility, stability, bioavailability, as well as in improved intracellular uptake and cell internalization. These advantages, in addition to curcumin's low toxicity, indicate the potential of curcumin to be loaded and co-loaded into nanosystems capable of providing a controlled release and targeted administration.

Pharmaceutical cocrystal: a game changing approach for the administration of old drugs in new crystalline form

Pharmaceutical cocrystals are still gaining the interest of the researchers due to their potential to alter physicochemical, mechanical, and pharmacokinetic properties of active pharmaceutical ingredients without negotiating therapeutic action. The diverse new applications of cocrystals, like taste masking, reduced toxicity, patenting opportunities, commercial potential, etc. act as driving force to the rising interest of the pharmaceutical industries. Initially, cocrystals from the view of regulatory authorities, design strategies, cocrystal preparation in brief with special emphasis on scalable and solvent-free hot melt extrusion method, and practical guide to characterization have been provided. The special focus has been given to the biopharmaceutical attributes of the cocrystal. Finally, challenges before and after cocrystal preparation are presented in this review along with some commercial examples of the cocrystals.

Melting points of one- and two-component molecular crystals as effective characteristics for rational design of pharmaceutical systems

Based on the review of the literature results the database of the fusion temperatures of two-component molecular crystals (1947 co-crystals) and individual components thereof was built up. To improve the design of co-crystals with predictable melting temperatures, the correlation equations connecting co-crystals and individual components melting points were deduced. These correlations were discovered for 18 co-crystals of different stoichiometric compositions. The correlation coefficients were analysed, and the conclusions about the main/determinative and slave components of a co-crystal were made. The comparative analysis of the melting points of co-crystals composed from the same components but with different stoichiometry showed a co-crystal melting temperature growth when increasing the content of a high-melting component. The differences in the melting temperatures were determined and discussed for the following: (a) monotropic polymorphic forms, (b) two-component crystals with the same composition and different stoichiometry, and (c) two-component crystals based on racemates and enantiomers. The database analysis revealed the active pharmaceutical ingredients (APIs) and co-formers (CFs) more particularly used for co-crystal design. The approach based on an efficacy parameter allowing the prediction of co-crystals with melting points lower than those of individual compounds was developed.

Unprecedented morphology control of gas phase cocrystal growth using multi zone heating and tailor made additives

Herein, it is shown for the first time that cocrystals can be grown by cosublimation with unprecedented morphology control using tailor made additives. Multicrystalline sea-urchin motifs and solids that look like candy-floss are transformed into block-like and needle-like single crystals using additives.

A Comprehensive Study of a New 1.75 Hydrate of Ciprofloxacin Salicylate: SCXRD Structure Determination, Solid Characterization, Water Stability, Solubility, and Dissolution Study

One problem that often arises during the formulation of a dosage form is the solubility and dissolution of the active ingredients. This problem arises in ciprofloxacin, which is a BCS class IV fluoroquinolone antibiotic. A pseudopolymorph is a kind of polymorph in which the number of hydrates is different. In this study, a new pseudopolymorph comprised of ciprofloxacin and salicylic acid was found, namely the salt ciprofloxacin salicylate 1.75 hydrate form. This new solid phase was analyzed by Fourier-transform infrared spectroscope (FTIR), Raman spectroscopy, and thermal analysis and proven by Powder X-ray Diffractometry (PXRD) analysis. The crystal structure was successfully determined by Single Crystal X-ray Diffractometry (SCXRD) analysis. It was found that the piperazinyl group of ciprofloxacin is protonated by H+ from the carboxylic group of salicylic acid. In the unit cell, two ciprofloxacin and two salicylic acid molecules were independent with four water molecules, in which one water molecule had 0.5 occupancy due to inversion symmetry. Interestingly, this hydrate crystal dehydrated by grinding for 105 minutes forms an anhydrous crystalline phase, which was analyzed with FTIR, Raman spectroscopy, thermal analysis, and PXRD. The solubility and dissolution tests were carried out using UV-Visible spectrophotometry and a multiple linear regression method. This new hydrate solid phase has a better profile than the original ciprofloxacin crystal, according to the solubility and dissolution tests.

Co-crystals, Salts or Mixtures of Both? The Case of Tenofovir Alafenamide Fumarates

Tenofovir alafenamide fumarate (TAF) is the newest prodrug of tenofovir that constitutes several drug products used for the treatment of HIV/AIDS. Although the solid-state properties of its predecessor tenofovir disoproxil fumarate have been investigated and described in the literature, there are no data in the scientific literature on the solid state properties of TAF. In our report, we describe the preparation of two novel polymorphs II and III of tenofovir alafenamide monofumarate (TA MF2 and TA MF3). The solid-state structure of these compounds was investigated in parallel to the previously known tenofovir alafenamide monofumarate form I (TA MF1) and tenofovir alafenamide hemifumarate (TA HF). Interestingly, the single-crystal X-ray diffraction of TA HF revealed that this derivative exists as a co-crystal form. In addition, we prepared a crystalline tenofovir alafenamide free base (TA) and its hydrochloride salt (TA HCl), which enabled us to determine the structure of TA MF derivatives using ¹⁵N-ssNMR (¹⁵N-solid state nuclear magnetic resonance). Surprisingly, we observed that TA MF1 exists as a mixed ionization state complex or pure salt, while TA MF2 and TA MF3 can be obtained as pure co-crystal forms.

Pharmaceutical Co-Crystallization: Regulatory Aspects, Design, Characterization, and Applications

Pharmaceutical co-crystals are novel class of pharmaceutical substances, which possess an apparent probability of advancement of polished physical properties offering stable and patentable solid forms. These multi-component crystalline forms influence pertinent physicochemical parameters like solubility, dissolution rate, chemical stability, physical stability, etc. which in turn result in the materials with superior properties to those of the free drug. Co-crystallization is a process by which the molecular interactions can be altered to optimize the drug properties. Co-crystals comprise a multicomponent system of active pharmaceutical ingredient (API) with a stoichiometric amount of a pharmaceutically acceptable coformer incorporated in the crystal lattice. By manufacturing pharmaceutical co-crystals, the physicochemical properties of a drug can be improved thus multicomponent crystalline materials have received renewed interest in the current scenario due to the easy administration in the pharmaceutical industry. There is an immense amount of literature available on co-crystals. However, there is a lack of an exhaustive review on a selection of coformers and regulations on co-crystals. The review has made an attempt to bridge this gap. The review also describes the methods used to prepare co-crystals with their characterization. Brief description on the pharmaceutical applications of co-crystals has also been incorporated here. Efforts are made to include reported works on co-crystals, which further help to understand the concept of co-crystals in depth.

Green synthesis and biological evaluation of novel 5-fluorouracil derivatives as potent anticancer agents

This study reports the formation of 5-FU co-crystals with four different pharmacologically safe co-formers; Urea, Thiourea, Acetanilide and Aspirin using methanol as a solvent. Two fabrication schemes were followed i.e., solid-state grinding protocol, in which API and co-formers were mixed through vigorous grinding while in the other method separate solutions of both the components were made and mixed together. The adopted approaches offer easy fabrication protocols, no temperature maintenance requirements, no need of expensive solvents, hardly available apparatus, isolation and purification of the desired products. In addition, there is no byproducts formation, In fact, a phenomenon embracing the requirements of green synthesis. Through FTIR analysis; for API the N-H absorption frequency was recorded at 3409.02 cm-1 and that of -C[bond, double bond]O was observed at 1647.77 cm-1. These characteristics peaks of 5-FU were significantly shifted and recorded at 3499.40 cm-1 and 1649.62 cm-1 for 5-FU-Ac (3B) and 3496.39 cm-1 and 1659.30 cm-1 for 5-FU-As (4B) co-crystals for N-H and -C[bond, double bond]O groups respectively. The structural differences between API and co-crystals were further confirmed through PXRD analysis. The characteristic peak of 5-FU at 2θ = 28.79918o was significantly shifted in the graphs of co-crystals not only in position but also with respect to intensity and FWHM values. In addition, new peaks were also recorded in all the spectra of co-formers confirming the structural differences between API and co-formers. In addition, percent growth inhibition was also observed by all the co-crystals through MTT assay against HCT 116 colorectal cell lines in vitro. At four different concentrations; 25, 50, 100 and 200 µg/mL, slightly different trends of the effectiveness of API and co-crystals were observed. However; among all the co-crystal forms, 5-FU-thiourea co-crystals obtained through solution method (2B) proved to be the most effective growth inhibitor at all the four above mentioned concentrations.

Role of Structure, Microenvironmental pH, and Speciation To Understand the Formation and Properties of Febuxostat Eutectics

Cocrystallization studies were undertaken to improve the solubility of a highly water-insoluble drug, febuxostat (FXT), used in the treatment of gout and hyperuricemia. A liquid-assisted grinding (LAG) method was successfully employed, starting with the screening of various coformers for obtaining cocrystals. However, in this process, three eutectic systems with coformers (probenecid, adipic acid, and α-ketoglutaric acid) were formed. Affinities of the different functional groups to form a hydrogen bond and ΔpK_a differences, leading to the eutectic formation, were discussed. The eutectic systems thus formed were further characterized and analyzed using a differential scanning calorimeter (DSC) and powder X-ray diffraction (PXRD). Binary thermal phase diagrams were plotted using different ratios of the systems to confirm the formation of eutectics, and pH-dependent solubility studies exhibited a significant decrease in the solubility in comparison to that of the drug for all three eutectic systems. The solubility of FXT reduced from 46.53 μg/mL (pH 5.63) to 46.03 μg/mL, 28.53 μg/mL, and 18.88 μg/mL; 770.58 μg/mL (pH 8.21) to 307.574 μg/mL, 116.63 μg/mL, 113.40 μg/mL; and from 13165.97 μg/mL (pH 10.13) to 1409.737 μg/mL, 854.51 μg/mL, and 1218.99 μg/mL for FXT-probenecid, FXT-adipic acid, and FXT-α-ketoglutaric acid eutectic systems, respectively. Furthermore, the microenvironmental pH studies were carried out to understand the effect of the microenvironment on the solubility of these eutectic systems. The contribution to solubility from lattice and nonlattice forces considering the microenvironment was also discussed.

Cocrystal Formation of Betulinic Acid and Ascorbic Acid: Synthesis, Physico-Chemical Assessment, Antioxidant, and Antiproliferative Activity

Betulinic acid (BA) was demonstrated to be a very promising anticancer agent against various tumor cell lines such as breast, colon, lung, and brain. Despite its strong cytotoxic effect, betulinic acid exhibits low water solubility, feature that is reflected in its poor bioavailability. To overcome these drawbacks, numerous strategies were conducted to improve its physicochemical and pharmacokinetic profile, among which cocrystalization emerged as a promising approach. Thus, our work consisted in obtaining slowly grown cocrystals of BA and ascorbic acid (BA+VitC) in isopropyl alcohol obtained in a hydrothermal experiment. The newly formed cocrystals were characterized by physico-chemical methods such asSEM, DSC, XRPD, and FT-IR spectroscopy demonstrating BA+VitC cocrystal formation while their antioxidant activity revealed an additive antioxidant effect. To investigate the biological effect, BA+VitC cocrystals were tested on HaCat (immortalized human keratinocytes), B164A5 and B16F0 (murine melanoma), MCF7 and MDA-MB-231 (human breast cancer), and HeLa (cervical cancer) cell lines. Results of BA upon the tested tumor cell lines, after co-crystallization with vitamin C, indicated a superior cytotoxic effect with the preservation of a good selectivity index assumably due to an improved BA water solubility and consequently an optimized bioavailability.

Drug Solubility Enhancement through the Preparation of Multicomponent Organic Materials: Eutectics of Lovastatin with Carboxylic Acids

Lovastatin (LOV) is a drug used to treat hypercholesterolemia. Recent studies have identified its antioxidant effects and potential use in the treatment of some types of cancer. However, the low bioavailability related to its poor water solubility limits its use in solid oral dosage forms. Therefore, to improve the solubility of LOV three eutectic systems of LOV with the carboxylic acids benzoic (BEN), salicylic (SAL) and cinnamic (CIN) were obtained. Both binary phase and Tammann diagrams were constructed using differential scanning calorimetry (DSC) data of mixtures prepared from 0.1 to 1.0 molar ratios. Binary mixtures and eutectics were prepared by liquid-assisted grinding. The eutectics were further characterized by DSC and powder X-ray diffraction (PXRD), Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The LOV-BEN, LOV-SAL and LOV-CIN system formed a eutectic at an LOV mole fraction of 0.19, 0.60 and 0.14, respectively. The systems exhibited improvements in LOV solubility, becoming more soluble by five-fold in the LOV-SAL system and approximately four-fold in the other two systems. Considering that the solubility enhancements and the carboxylic acids used are generally recognized as safe by the U.S. Food and Drug Administration (FDA), the LOV eutectic systems are promising materials to be used in a solubility enhancement strategy for pharmaceutical product formulation.

A novel approach to design febuxostat-salicylic acid eutectic system: evaluation and characterization

The current study was aimed at investigating the febuxostat-salicylic acid (FXT-SAA) eutectic system using two polymorphs of FXT, form Q and form A.

Engineering Cocrystals of PoorlyWater-Soluble Drugs to Enhance Dissolution in Aqueous Medium

Biopharmaceutics Classification System (BCS) Class II and IV drugs suffer from poor aqueous solubility and hence low bioavailability. Most of these drugs are hydrophobic and cannot be developed into a pharmaceutical formulation due to their poor aqueous solubility. One of the ways to enhance the aqueous solubility of poorlywater-soluble drugs is to use the principles of crystal engineering to formulate cocrystals of these molecules with water-soluble molecules (which are generally called coformers). Many researchers have shown that the cocrystals significantly enhance the aqueous solubility of poorly water-soluble drugs. In this review, we present a consolidated account of reports available in the literature related to the cocrystallization of poorly water-soluble drugs. The current practice to formulate new drug cocrystals with enhanced solubility involves a lot of empiricism. Therefore, in this work, attempts have been made to understand a general framework involved in successful (and unsuccessful) cocrystallization events which can yield different solid forms such as cocrystals, cocrystal polymorphs, cocrystal hydrates/solvates, salts, coamorphous solids, eutectics and solid solutions. The rationale behind screening suitable coformers for cocrystallization has been explained based on the rules of five i.e., hydrogen bonding, halogen bonding (and in general non-covalent bonding), length of carbon chain, molecular recognition points and coformer aqueous solubility. Different techniques to screen coformers for effective cocrystallization and methods to synthesize cocrystals have been discussed. Recent advances in technologies for continuous and solvent-free production of cocrystals have also been discussed. Furthermore, mechanisms involved in solubilization of these solid forms and the parameters influencing dissolution and stability of specific solid forms have been discussed. Overall, this review provides a consolidated account of the rationale for design of cocrystals, past efforts, recent developments and future perspectives for cocrystallization research which will be extremely useful for researchers working in pharmaceutical formulation development.

Towards medicinal mechanochemistry: evolution of milling from pharmaceutical solid form screening to the synthesis of active pharmaceutical ingredients (APIs)

This overview highlights the emergent area of mechanochemical reactions for making active pharmaceutical ingredients (APIs), and covers the latest advances in the recently established area of mechanochemical screening and synthesis of pharmaceutical solid forms, specifically polymorphs, cocrystals, salts and salt cocrystals. We also provide an overview of the most recent developments in pharmaceutical uses of mechanochemistry, including real-time reaction monitoring, techniques for polymorph control and approaches for continuous manufacture using twin screw extrusion, and more. Most importantly, we show how the overlap of previously unrelated areas of mechanochemical screening for API solid forms, organic synthesis by milling, and mechanochemical screening for molecular recognition, enables the emergence of a new research discipline in which different aspects of pharmaceutical and medicinal chemistry are addressed through mechanochemistry rather than through conventional solution-based routes. The emergence of such medicinal mechanochemistry is likely to have a strong impact on future pharmaceutical and medicinal chemistry, as it offers not only access to materials and reactivity that are sometimes difficult or even impossible to access from solution, but can also provide a general answer to the demands of the pharmaceutical industry for cleaner, safer and efficient synthetic solutions.

Pharmaceutical Cocrystals: New Solid Phase Modification Approaches for the Formulation of APIs

Cocrystals can be used as an alternative approach based on crystal engineering to enhance specific physicochemical and biopharmaceutical properties of active pharmaceutical ingredients (APIs) when the approaches to salt or polymorph formation do not meet the expected targets. In this article, an overview of pharmaceutical cocrystals will be presented, with an emphasis on the intermolecular interactions in cocrystals and the methods for their preparation. Furthermore, cocrystals of direct pharmaceutical interest, along with their in vitro properties and available in vivo data and characterization techniques are discussed, highlighting the potential of cocrystals as an attractive route for drug development.

The Binary System of Ibuprofen-Nicotinamide Under Nanoscale Confinement: From Cocrystal to Coamorphous State

Coamorphous systems have gained success in stabilizing amorphous drugs and improving their solubility and dissolution. Here we proposed to confine a binary mixture of drug and coformer (CF) within nanopores to obtain a nanoconfined coamorphous (NCA) system. For proving feasibility of this proposal, a poorly water-soluble drug (ibuprofen) and a frequently used pharmaceutical CF (nicotinamide) were loaded into nanopores of mesoporous silica microspheres. The solid state of NCA system was characterized by differential scanning calorimetry, X-ray powder diffraction, infrared spectrum, and solid-state nuclear magnetic resonance. With large numbers of nanopores, mesoporous silica microspheres appear to be a feasible carrier to transform a cocrystal system into coamorphism by nanoscale confinement. Benefiting from both nanoscale confinement and CF, the NCA system of ibuprofen achieved synchronic increase in dissolution properties and physical stability. Consequently, the NCA strategy is effective in achieving coamorphous state and offers a promising alternative for formulating poorly water-soluble drugs.

Is Failure of Cocrystallization Actually a Failure? Eutectic Formation in Cocrystal Screening of Hesperetin

Cocrystal screening of hesperetin with certain countermolecules generated highly soluble noncovalent derivatives in the form of eutectics, instead of expected cocrystals. As adhesive forces established by complimentary functional groups on hesperetin and coformers were unable to overcome the stress due to size shape mismatch of component molecules, thus, eutectics were formed. Hesperetin, a polyphenolic antioxidant with potent anticancer and cardioprotective effects, has an underdeveloped role in modern therapeutics on account of its critically low aqueous solubility resulting in stunted bioavailability. The liquid-assisted cogrinding of hesperetin and coformers generated binary-phase eutectics in fixed stoichiometry with theophylline (1:1.5), adenine (2:1), gallic acid (1.5:1), and theobromine (2:1). Primarily characterized by lower melting endotherm in differential scanning calorimetry, the eutectics showed complete melting in hot-stage microscopy. Apart from characteristic V-shaped binary-phase diagram, no discernible changes in the FTIR and powder X-ray diffraction spectra further confirm eutectic formation. The morphological differences were analyzed by SEM measurements. A 2 to 4 times enhanced dissolution profile of the eutectics measured in pH 7.4 aqueous buffer was coupled with the in vitro (1,1-diphenyl-2-picryl hydroxyl free radical antioxidant assay and RBC antihemolytic assay) studies to present a complete preliminary data on the improved bioavailability of hesperetin eutectics.

Renewable Green Platform Chemicals for Polymers

n/a.

Inherent formulation issues of kinase inhibitors

The small molecular Kinase Inhibitor (smKI) drug class is very promising and rapidly expanding. All of these drugs are administered orally. The clear relationship between structure and function has led to drugs with a general low intrinsic solubility. The majority of the commercial pharmaceutical formulations of the smKIs are physical mixtures that are limited by the low drug solubility of a salt form. This class of drugs is therefore characterized by an impaired and variable bioavailability rendering them costly and their therapies suboptimal. New formulations are sparingly being reported in literature and patents. The presented data suggests that continued research into formulation design can help to develop more efficient and cost-effective smKI formulation. Moreover, it may also be of help in the future design of the formulations of new smKIs.

Correlating the melting point alteration with the supramolecular structure in aripiprazole drug cocrystals

Structural reasons for the melting point variations in isostructural cocrystals of the aripiprazole drug are investigated through combined spectroscopic and diffraction studies.