Analysis of Pathogenic Bacterial and Yeast Biofilms Using the Combination of Synchrotron ATR-FTIR Microspectroscopy and Chemometric Approaches

Rapid serotype-independent differential detection of biofilm-positive and biofilm-negative Salmonella using Fourier transform infrared biotyping

Foodborne illnesses caused by Salmonella represent a global one health challenge, with biofilm-forming strains exhibiting enhanced public health risks due to their ability to persist due to resistance to antimicrobial agents, disinfectants, and environmental stresses. While food-safety and public health investigation primarily focus on Salmonella identification and source tracing, they often overlook the biofilm-forming capacity of isolates, limiting their predictive value for risks posed by biofilm producing Salmonella. This study assessed fourier transform infrared (FTIR) biotyping for rapid serotype-independent differentiatial detection of biofilm-positive (BFP) from biofilm-negative (BFN) Salmonella. A total of 270 Salmonella strains representing 12 common serotypes were classified using three conventional biofilm assays (congo red and coomassie brilliant blue agar test, calcofluor test, and tube test) into true BFP (n = 80), true BFN (n = 64), and uncertain (n = 59) biofilm producers. Biofilm production for each group was also assessed with a microtiter plate assay. FTIR biotyping was applied to a subset of 115 strains (61 BFP, 54 BFN). Using spectral windows of 1180-1050 cm-1 and 1400-1200 cm-1, FTIR biotyping accurately differentiated BFP from BFN strains with 93.4 % sensitivity, 83.3 % specificity, and 88.6 % overall accuracy. FTIR biotyping differentiated 59 strains with uncertain biofilm status into BFN (n = 45) and BFP (n = 14). FTIR biotyping provides a rapid, sensitive and specific method for detection of biofilm-forming Salmonella strains. Incorporating FTIR biotyping for biofilm detection in current Salmonella surveillance and source-tracing protocols can enhance food safety risk assessments and improve Salmonella outbreak prevention.

Use of analytical strategies to understand spatial chemical variation in bacterial surface communities

Not only do surface-growing microbes such as biofilms display specific traits compared to planktonic cells, but also they display many heterogeneous behaviors over many spatial and temporal contexts. While the application of molecular genetics tools to extract or visualize gene expression or regulatory function data is now common in studying surface growth, the use of analytical chemistry tools to visualize the spatiotemporal distribution of chemical products synthesized by these surface microbes is less common. Here, we review chemical imaging tools that have been used to inform our understanding of surface-growing microbes. We highlight the use of confocal Raman Microscopy, surface-enhanced Raman spectroscopy, matrix-assisted laser desorption/ionization, secondary ion mass spectrometry, desorption electrospray ionization, and electrochemical imaging that have been applied to assess two-dimensional chemical profiles of bacteria. We specifically discuss the use of these tools to study rhamnolipids, alkylquinolones, and phenazines of the bacterium Pseudomonas aeruginosa.

Graveyard effects of antimicrobial nanostructured titanium over prolonged exposure to drug resistant bacteria and fungi

Innovations in nanostructured surfaces have found a practical place in the medical area with use in implant materials for post-operative infection prevention. These textured surfaces should be dual purpose: (1) bactericidal on contact and (2) resistant to biofilm formation over prolonged periods. Here, hydrothermally etched titanium surfaces were tested against two highly antimicrobial resistant microbial species, methicillin-resistant Staphylococcus aureus and Candida albicans. Two surface types - unmodified titanium and nanostructured titanium - were incubated in a suspension of each microbial strain for 1 day and 7 days. Surface topography and cross-sectional information of the microbial cells adhered to the surfaces, along with biomass volume and live/dead rate, showed that while nanostructured titanium was able to kill microbes after 1 day of exposure, after 7 days, the rate of death becomes negligible when compared to the unmodified titanium. This suggests that as biofilms mature on a nanostructured surface, the cells that have lysed conceal the nanostructures and prime the surface for planktonic cells to adhere, decreasing the possibility of structure-induced lysis. Synchrotron macro-attenuated total reflection Fourier transform infrared (macro ATR-FTIR) micro-spectroscopy was used to elucidate the biochemical changes occurring following exposure to differing surface texture and incubation duration, providing further understanding into the effects of surface morphology on the biochemical molecules (lipids, proteins and polysaccharides) in an evolving and growing microbial colony.

Bacterial Communities and Their Role in Bacterial Infections

Since infections associated with microbial communities threaten human health, research is increasingly focusing on the development of biofilms and strategies to combat them. Bacterial communities may include bacteria of one or several species. Therefore, examining all the microbes and identifying individual community bacteria responsible for the infectious process is important. Rapid and accurate detection of bacterial pathogens is paramount in healthcare, food safety, and environmental monitoring. Here, we analyze biofilm composition and describe the main groups of pathogens whose presence in a microbial community leads to infection (Staphylococcus aureus, Enterococcus spp., Cutibacterium spp., bacteria of the HACEK, etc.). Particular attention is paid to bacterial communities that can lead to the development of device-associated infections, damage, and disruption of the normal functioning of medical devices, such as cardiovascular implants, biliary stents, neurological, orthopedic, urological and penile implants, etc. Special consideration is given to tissue-located bacterial biofilms in the oral cavity, lungs and lower respiratory tract, upper respiratory tract, middle ear, cardiovascular system, skeletal system, wound surface, and urogenital system. We also describe methods used to analyze the bacterial composition in biofilms, such as microbiologically testing, staining, microcolony formation, cellular and extracellular biofilm components, and other methods. Finally, we present ways to reduce the incidence of biofilm-caused infections.

Integrated remediation and detoxification of triclocarban-contaminated water using waste-derived biochar-immobilized cells by long-term column experiments

Triclocarban (TCC), an antibacterial agent commonly used in personal care products, is one of the top ten contaminants of emerging concern in various environmental media, including soil and contaminated water in vadose zone. This study aimed to investigate TCC-contaminated water remediation using biochar-immobilized bacterial cells. Pseudomonas fluorescens strain MC46 (MC46), an efficient TCC-degrading isolate, was chosen, whereas agro-industrial carbonized waste as biochar was directly used as a sustainable cell immobilization carrier. According to the long-term TCC removal performance results (160 d), the biochar-immobilized cells consistently exhibited high TCC removal efficiencies (84-97%), whereas the free MC46 removed TCC for 76-94%. At 100 days, the detachment of the MC46 cells from the immobilized cell column was observed. The micro-Fourier-transform infrared spectroscopy results indicated that extracellular polymeric substance (EPS) was produced, but polysaccharide and protein fractions were washed out of the column. The lipid fraction of EPS adhered to the biochar, promoting TCC sorption for long-term treatment. The shortening of MC46 cells improved the tolerance of TCC toxicity. The TCC-contaminated water was successfully detoxified by the biochar-immobilized MC46 cells. Overall, the waste-derived biochar-immobilized cell system proposed in this study for the removal of emerging contaminants, including TCC, is efficient, economical, and aligned with the sustainable development concept of value-added utilization of waste.

Pulsed light treatment of whole white button mushroom (Agaricus bisporus): Kinetics and mechanism of microbial inactivation and storage study

The whole white button mushrooms (WWBMs) are highly perishable due to susceptibility to microbial spoilage. This study explored the potential of pulsed light (PL) treatment for decontamination and shelf-life extension of WWBM. WWBM surface was inoculated with Escherichia coli, Listeria monocytogenes, and Aspergillus niger spores (8.1, 8.0, and 8.05 log10 CFU/g, respectively) and tested for inactivation against various PL intensities (fluence 0.13-0.75 J/cm2). The kinetics and mechanism of microbial inactivation were explored, and shelf life was determined at 4, 20, and 37°C. Microbial inactivation increased with increasing PL intensity. PL-induced microbial inactivation was well explained by Weibull model with shape parameters (β-value) for E. coli, L. monocytogenes, A. niger, aerobic mesophiles, and yeast and mold as 0.87, 0.92, 0.91, 0.89, and 0.94, respectively. PL-treatment at 0.75 J/cm2 resulted in >5-log cycle reduction in all inoculated and natural microorganisms. Exposure to PL led to collapse of cellular structure, ruptured cell wall, and leakage of cellular material in all microorganisms and spores along with alterations in nucleic acid and lipid bands. At 4°C, maximum shelf life of 5 days was achieved when WWBM was exposed at 0.75 J/cm2. The WWBM retained 83.3% phenolics, 83.9% antioxidant capacity, and 77.4% vitamin D2 at 4°C while reducing the polyphenol oxidase and peroxidase activity by 89% and 79%. The degradation rate for quality parameters increased with storage temperature. The activation energy of the browning index affirmed it as the most sensitive quality attribute during storage. The study concluded the potential of PL treatment to prolong the shelf life of WWBM.

Transforming Spirulina maxima Biomass into Ultrathin Bioactive Coatings Using an Atmospheric Plasma Jet: A New Approach to Healing of Infected Wounds

The challenge of wound healing, particularly in patients with comorbidities such as diabetes, is intensified by wound infection and the accelerating problem of bacterial resistance to current remedies such as antibiotics and silver. One promising approach harnesses the bioactive and antibacterial compound C-phycocyanin from the microalga Spirulina maxima. However, the current processes of extracting this compound and developing coatings are unsustainable and difficult to achieve. To circumvent these obstacles, a novel, sustainable argon atmospheric plasma jet (Ar-APJ) technology that transforms S. maxima biomass into bioactive coatings is presented. This Ar-APJ can selectively disrupt the cell walls of S. maxima, converting them into bioactive ultrathin coatings, which are found to be durable under aqueous conditions. The findings demonstrate that Ar-APJ-transformed bioactive coatings show better antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa. Moreover, these coatings exhibit compatibility with macrophages, induce an anti-inflammatory response by reducing interleukin 6 production, and promote cell migration in keratinocytes. This study offers an innovative, single-step, sustainable technology for transforming microalgae into bioactive coatings. The approach reported here has immense potential for the generation of bioactive coatings for combating wound infections and may offer a significant advance in wound care research and application.

Comparative analysis of biofilm characterization of probiotic Escherichia coli

Biofilms are thought to play a vital role in the beneficial effects of probiotic bacteria. However, the structure and function of probiotic biofilms are poorly understood. In this work, biofilms of Escherichia coli (E. coli) Nissle 1917 were investigated and compared with those of pathogenic and opportunistic strains (E. coli MG1655, O157:H7) using crystal violet assay, confocal laser scanning microscopy, scanning electron microscopy and FTIR microspectroscopy. The study revealed significant differences in the morphological structure, chemical composition, and spatial heterogeneity of the biofilm formed by the probiotic E. coli strain. In particular, the probiotic biofilm can secrete unique phospholipid components into the extracellular matrix. These findings provide new information on the morphology, architecture and chemical heterogeneity of probiotic biofilms. This information may help us to understand the beneficial effects of probiotics for various applications.

Gold nanoparticle adsorption alters the cell stiffness and cell wall bio-chemical landscape of Candida albicans fungal cells

HYPOTHESIS

Nanomaterials have been extensively investigated for a wide range of biomedical applications, including as antimicrobial agents, drug delivery vehicles, and diagnostic devices. The commonality between these biomedical applications is the necessity for the nanoparticle to interact with or pass through the cellular wall and membrane. Cell-nanomaterial interactions/uptake can occur in various ways, including adhering to the cell wall, forming aggregates on the surface, becoming absorbed within the cell wall itself, or transversing into the cell cytoplasm. These interactions are common to mammalian cells, bacteria, and yeast cells. This variety of interactions can cause changes to the integrity of the cell wall and the cell overall, but the precise mechanisms underpinning such interactions remain poorly understood. Here, we investigate the interaction between commonly investigated gold nanoparticles (AuNPs) and the cell wall/membrane of a model fungal cell to explore the general effects of interaction and uptake.

EXPERIMENTS

The interactions between 100 nm citrate-capped AuNPs and the cell wall of Candida albicans fungal cells were studied using a range of advanced microscopy techniques, including atomic force microscopy, confocal laser scanning microscopy, scanning electron microscopy, transmission electron microscopy, and synchrotron-FTIR micro-spectroscopy.

FINDINGS

In most cases, particles adhered on the cell surface, although instances of particles being up-taken into the cell cytoplasm and localised within the cell wall and membrane were also observed. There was a measurable increase in the stiffness of the fungal cell after AuNPs were introduced. Analysis of the synchrotron-FTIR data showed significant changes in spectral features associated with phospholipids and proteins after exposure to AuNPs.

[Distinctions in molecular composition of the dental biofilm in a dependence of method of exo/endogeneous caries prevention and cariogenic condition of a patient]

OBJECTIVE

Comparative study of changes in the secondary structure of dental biofilm proteins in people with cariesogenic and cariesoprotective status using synchrotron IR microspectroscopy.

MATERIALS AND METHODS

Dental biofilm samples from 50 patients without caries (group 1) and with carious lesions of tooth enamel (group 2) were studied. The molecular composition of biofilms was studied using IR microspectroscopy. Changes in the secondary structure of dental biofilm proteins were evaluated based on deconvolution of Amide I or Amide II amide bands. using the analysis of variance. Patients of both groups took tablets containing a mineral complex with calcium glycerophosphate.

RESULTS

Based on the deconvolution of the IR spectral profile of the Amide I and Amide II bands, the changes occurring in the secondary structure of dental biofilm proteins have been studied. Using a large set of spectra, it was shown that the prediction of the secondary structure of the biofilm protein network is influenced by both the cariesogenic situation in the oral cavity (with initial carious lesions of the enamel) and the fact that patients use a modulator - calcium glycerophosphate (a tableted mineral complex with calcium glycerophosphate). Significant intra-group and intergroup differences in the secondary structure of dental biofilm proteins were established for patients in normal and carisogenic situations in the mouth, including after the use of a tableted mineral complex with calcium glycerophosphate. This allowed us to give a mathematical assessment of shifts in the secondary structure of proteins depending on the activity of caries and external modulation.

CONCLUSION

The results obtained can form the basis of a technique for spectroscopic diagnosis of changes (shifts) in the oral microbiome leading to the development of the carious process, as well as become the basis for choosing the optimal therapeutic ways to treat enamel caries, including through preventive measures aimed at restoring the microflora of the patient's oral cavity.

Single Infrared Spectrum Enables Simultaneous Identification of (Bio)Chemical Nature and Particle Size of Microorganisms and Synthetic Microplastic Beads

Populations of nearly identical chemical and biological microparticles include the synthetic microbeads used in cosmetic, biomedical, agri-food, and pharmaceutical industries as well as the class of living microorganisms such as yeast, pollen, and biological cells. Herein, we identify simultaneously the size and chemical nature of spherical microparticle populations with diameters larger than 1 μm. Our analysis relies on the extraction of both physical and chemical signatures from the same optical spectrum recorded using attenuated total reflection (ATR)-Fourier transform infrared (FTIR) spectroscopy. These signatures are the spectral resonances caused by the microparticles, which depend on their size and the absorption peaks revealing their chemical nature. We validate the method first on separated and mixed groups of spherical microplastic particles of two different diameters, where the method is used to calculate the diameter of the microspherical particles. Then, we apply the method to correctly identify and measure the diameter of Saccharomyces cerevisiae yeast cells. Theoretical simulations to help in understanding the effect of size distribution and dispersion support our results.

Determination of key factors affecting biofilm formation on the aged Poly(ethylene terephthalate) during anaerobic digestion

Biofilm formation on plastic surface is a growing concern because it can alter the plastic surface properties and exacerbate the ecological risk. Identifying key factors that affecting biofilm formation is critical for effective pollution control. In this study, the poly (ethylene terephthalate) (PET) was aged in water and air conditions with UV irradiation, then incubated in the digestate of food waste anaerobic digestion to allow biofilm formation. Surface analysis techniques, including scanning electron microscopy (SEM), atomic force microscopy (AFM), and Fourier-transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), were utilized to investigated the changes in the topography, roughness, hydrophily, and functional groups change of the PET surface during the aging process. Confocal laser scanning microscopy (CLSM) was used to determine the distribution of microorganisms on the PET surface after incubation in the digestate. This study focused on understanding the interactions between the PET surface and biofilm to identify critical surface factors that affect biofilm formation. Results showed that the four months aging process decreased the contact angle of the PET surface from 96.92° to 76.08° and 68.97° in water and air conditions, respectively, corresponding to an increase of 44% and 70% in the surface energy. Additionally, aging in air conditions led to a rougher surface compared to water conditions. The arithmetic roughness average (Ra) of the PET-Water was 11.0 nm, comparable to that of the pristine PET, while the value of PET-Air was much higher (43.9 nm). The results further indicated that biofilm formation during anaerobic digestion was more sensitive to roughness than hydrophily. The PET surface aged in air conditions provided a more suitable environment for microbial reproduction, leading to the aggradation of living cells.

Applications of Fourier Transform-Infrared spectroscopy in microbial cell biology and environmental microbiology: advances, challenges, and future perspectives

Microorganisms play pivotal roles in shaping ecosystems and biogeochemical cycles. Their intricate interactions involve complex biochemical processes. Fourier Transform-Infrared (FT-IR) spectroscopy is a powerful tool for monitoring these interactions, revealing microorganism composition and responses to the environment. This review explores the diversity of applications of FT-IR spectroscopy within the field of microbiology, highlighting its specific utility in microbial cell biology and environmental microbiology. It emphasizes key applications such as microbial identification, process monitoring, cell wall analysis, biofilm examination, stress response assessment, and environmental interaction investigation, showcasing the crucial role of FT-IR in advancing our understanding of microbial systems. Furthermore, we address challenges including sample complexity, data interpretation nuances, and the need for integration with complementary techniques. Future prospects for FT-IR in environmental microbiology include a wide range of transformative applications and advancements. These include the development of comprehensive and standardized FT-IR libraries for precise microbial identification, the integration of advanced analytical techniques, the adoption of high-throughput and single-cell analysis, real-time environmental monitoring using portable FT-IR systems and the incorporation of FT-IR data into ecological modeling for predictive insights into microbial responses to environmental changes. These innovative avenues promise to significantly advance our understanding of microorganisms and their complex interactions within various ecosystems.

Yeast biofilms on abiotic surfaces: Adhesion factors and control methods

Biofilms are highly resistant to antimicrobials and are a common problem in many industries, including pharmaceutical, food and beverage. Yeast biofilms can be formed by various yeast species, including Candida albicans, Saccharomyces cerevisiae, and Cryptococcus neoformans. Yeast biofilm formation is a complex process that involves several stages, including reversible adhesion, followed by irreversible adhesion, colonization, exopolysaccharide matrix formation, maturation and dispersion. Intercellular communication in yeast biofilms (quorum-sensing mechanism), environmental factors (pH, temperature, composition of the culture medium), and physicochemical factors (hydrophobicity, Lifshitz-van der Waals and Lewis acid-base properties, and electrostatic interactions) are essential to the adhesion process. Studies on the adhesion of yeast to abiotic surfaces such as stainless steel, wood, plastic polymers, and glass are still scarce, representing a gap in the field. The biofilm control formation can be a challenging task for food industry. However, some strategies can help to reduce biofilm formation, such as good hygiene practices, including regular cleaning and disinfection of surfaces. The use of antimicrobials and alternative methods to remove the yeast biofilms may also be helpful to ensure food safety. Furthermore, physical control measures such as biosensors and advanced identification techniques are promising for yeast biofilms control. However, there is a gap in understanding why some yeast strains are more tolerant or resistant to sanitization methods. A better understanding of tolerance and resistance mechanisms can help researchers and industry professionals to develop more effective and targeted sanitization strategies to prevent bacterial contamination and ensure product quality. This review aimed to identify the most important information about yeast biofilms in the food industry, followed by the removal of these biofilms by antimicrobial agents. In addition, the review summarizes the alternative sanitizing methods and future perspectives for controlling yeast biofilm formation by biosensors.

Label-free analysis of biofilm phenotypes by infrared micro- and correlation spectroscopy

The methodology development for deeply describing the complex biofilm phenotypes is an urgent demand for understanding their basic biology and the central clinic relevance. Here, we developed an infrared microspectroscopy-based method for the quantitative evaluation and description of biofilm phenotypic characteristics by calculating the spectral similarity of the infrared data. Using this approach, we revealed the phenotypic variation during the biofilm formation process and biofilm heterogeneity between two E. coli strains. Two-dimensional correlation spectroscopy was further combined to deeply investigate the biochemical component evolution sequences during E. coli biofilm formation and revealed the first-order of the polysaccharide molecules change, expanding new opportunities for infrared microspectroscopy in revealing molecule evolution in the biofilm formation. This novel development offers a label-free optical toolkit for the bioanalytical analysis of biofilm phenotypes but also paves the way for screening the drugs to modulate the structure and ecology of biofilm microbiome.

Fourier Transform Infrared (FTIR) Spectroscopic Study of Biofilms Formed by the Rhizobacterium Azospirillum baldaniorum Sp245: Aspects of Methodology and Matrix Composition

Biofilms represent the main mode of existence of bacteria and play very significant roles in many industrial, medical and agricultural fields. Analysis of biofilms is a challenging task owing to their sophisticated composition, heterogeneity and variability. In this study, biofilms formed by the rhizobacterium Azospirillum baldaniorum (strain Sp245), isolated biofilm matrix and its macrocomponents have for the first time been studied in detail, using Fourier transform infrared (FTIR) spectroscopy, with a special emphasis on the methodology. The accompanying novel data of comparative chemical analyses of the biofilm matrix, its fractions and lipopolysaccharide isolated from the outer membrane of the cells of this strain, as well as their electrophoretic analyses (SDS-PAGE) have been found to be in good agreement with the FTIR spectroscopic results.

Synchrotron macro ATR-FTIR micro-spectroscopy to unlock silver ion-induced biochemical alterations in bacteria

The use of synchrotron macro ATR-FTIR micro-spectroscopy to reveal the antibacterial mechanism of silver ions against S. aureus and P. aeruginosa.

Easy and Affordable: A New Method for the Studying of Bacterial Biofilm Formation

BACKGROUND

Bacterial biofilm formation (BBF) proves itself to be in the spotlight of microbiology research due to the wide variety of infections that it can be associated with, the involvement in food spoilage, industrial biofouling and perhaps sewage treatment. However, BBF remains difficult to study due to the lack of standardization of the existing methods and the expensive equipment needed. We aim to describe a new inexpensive and easy to reproduce protocol for a 3D-printed microfluidic device that can be used to study BBF in a dynamic manner.

METHODS

We used the SolidWorks 3D CAD Software (EducationEdition 2019-2020, Dassault Systèmes, Vélizy-Villacoublay, France) to design the device and the Creality3D Ender 5 printer (Shenzhen Creality 3D Technology Co., Ltd., Shenzhen, China) for its manufacture. We cultivated strains of Enterococcus faecalis, Staphylococcus aureus, Klebsiella pneumoniae and Pseudomonas aeruginosa. For the biofilm evaluation we used optical coherence tomography (OCT), scanning electron microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy and crystal violet staining technique.

RESULTS

Based on the analysis, Enterococcus faecalis seems to produce more biofilm in the first hours while Pseudomonas aeruginosa started to take the lead on biofilm production after 24 h.

CONCLUSIONS

With an estimated cost around €0.1285 for one microfluidic device, a relatively inexpensive and easy alternative for the study of BBF was developed.

In situ monitoring of Lentilactobacillus parabuchneri biofilm formation via real-time infrared spectroscopy

Foodborne pathogenic microorganisms form biofilms at abiotic surfaces, which is a particular challenge in food processing industries. The complexity of biofilm formation requires a fundamental understanding on the involved molecular mechanisms, which may then lead to efficient prevention strategies. In the present study, biogenic amine producing bacteria, i.e., Lentilactobacillus parabuchneri DSM 5987 strain isolated from cheese were studied in respect with biofilm formation, which is of substantial relevance given their contribution to the presence of histamine in dairy products. While scanning electron microscopy was used to investigate biofilm adhesion at stainless steel surfaces, in situ infrared attenuated total reflection spectroscopy (IR-ATR) using a custom flow-through assembly was used for real-time and non-destructive observations of biofilm formation during a period of several days. The spectral window of 1700-600 cm-1 provides access to vibrational signatures characteristic for identifying and tracking L. parabuchneri biofilm formation and maturation. Especially, the amide I and II bands, lactic acid produced as the biofilm matures, and a pronounced increase of bands characteristic for extracellular polymeric substances (EPS) provide molecular insight into biofilm formation, maturation, and changes in biofilm architecture. Finally, multivariate data evaluation strategies were applied facilitating the unambiguous classification of the observed biofilm changes via IR spectroscopic data.

Effect of Exo/Endogenous Prophylaxis Dentifrice/Drug and Cariogenic Conditions of Patient on Molecular Property of Dental Biofilm: Synchrotron FTIR Spectroscopic Study

(1) Objectives: This study is the first one to investigate the molecular composition of the dental biofilm during the exogenous and endogenous prophylaxis stages (use of dentifrice/drug) of individuals with different cariogenic conditions using molecular spectroscopy methods. (2) Materials and Methods: The study involved 100 participants (50 males and 50 females), aged 18–25 years with different caries conditions. Biofilm samples were collected from the teeth surface of all participants. The molecular composition of biofilms was investigated using synchrotron infrared microspectroscopy. Changes in the molecular composition were studied through calculation and analysis of ratios between organic and mineral components of biofilm samples. (3) Results: Based on the data obtained by synchrotron FTIR, calculations of organic and mineral component ratios, and statistical analysis of the data, we were able to assess changes occurring in the molecular composition of the dental biofilm. Variations in the phosphate/protein/lipid, phosphate/mineral, and phospholipid/lipid ratios and the presence of statistically significant intra- and inter-group differences in these ratios indicate that the mechanisms of ion adsorption, compounds and complexes arriving from oral fluid into dental biofilm during exo/endogenous prophylaxis, differ for patients in norm and caries development. (4) Conclusions: The conformational environment and charge interaction in the microbiota and the electrostatic state of the biofilm protein network in patients with different cariogenic conditions play an important role. (5) Clinical Significance: Understanding the changes that occur in the molecular composition of the dental biofilm in different oral homeostasis conditions will enable successful transition to a personalised approach in dentistry and high-tech healthcare.

Illuminating the biochemical interaction of antimicrobial few-layer black phosphorus with microbial cells using synchrotron macro-ATR-FTIR

In the fight against drug-resistant pathogenic bacterial and fungal cells, low-dimensional materials are emerging as a promising alternative treatment method. Specifically, few-layer black phosphorus (BP) has demonstrated its effectiveness against a wide range of pathogenic bacterial and fungal cells with studies suggesting low cytotoxicity towards healthy mammalian cells. However, the antimicrobial mechanism of action of BP is not well understood. Before new applications for this material can be realised, further in-depth investigations are required. In this work, the biochemical interaction between BP and a series of microbial cells is investigated using a variety of microscopy and spectroscopy techniques to provide a greater understanding of the antimicrobial mechanism. Synchrotron macro-attenuated total reflection-Fourier transform infrared (ATR-FTIR) micro-spectroscopy is used to elucidate the chemical changes occurring outside and within the cell of interest after exposure to BP nanoflakes. The ATR-FTIR data, coupled with high-resolution microscopy, reveals major physical and bio-chemical changes to the phospholipids and amide I and II proteins, as well as minor chemical changes to the structural polysaccharides and nucleic acids when compared to untreated cells. These changes can be attributed to the physical interaction of the BP nanoflakes with the cell membranes, combined with the oxidative stress induced by the degradation of the BP nanoflakes. This study provides insight into the biochemical interaction of BP nanoflakes with microbial cells, allowing for a better understanding of the antimicrobial mechanism of action that will be important for the next generation of applications such as implant coatings, wound dressings, or medical surfaces.