Green Synthesis of Platinum and Palladium Nanoparticles Using Peganum harmala L. Seed Alkaloids: Biological and Computational Studies

Palladium Metal Nanocomposites Based on PEI-Functionalized Nitrogen-Doped Graphene Quantum Dots: Synthesis, Characterization, Density Functional Theory Modeling, and Cell Cycle Arrest Effects on Human Ovarian Cancer Cells

In this study, the synthesis, characterization, density functional theory calculations (DFT), and effect of polyethylenimine (PEI)-functionalized nitrogen-doped graphene quantum dots (PEI N-GQDs) and their palladium metal nanoparticles nanocomposites (PdNPs/PEI N-GQDs) on cancer cells were extensively investigated. The focus also includes investigating their cytotoxic and apoptotic effects on ovarian cancer cells, which pose a serious risk to women's health and have high death rates from delayed diagnosis, inadequate response to treatment, and decreased survival. Graphene quantum dots and their palladium nanocomposites were differentially effective against ovarian cancer cell lines. In particular, the smaller particle size and morphology of PdNPs/PEI N-GQDs nanocomposites compared with PEI N-GQDs probably enhance their activity through highly improved uptake by cells. These findings emphasize the importance of particle size in composite drugs for efficient cancer treatment. DFT results revealed that the Pd-containing nanocomposite, with a smaller highest occupied molecular orbital-lowest unoccupied molecular orbital gap, exhibited higher reactivity and anticancer effects in human ovarian cancer cell line, OVCAR-3. Significantly, the application of nanocomposites to ovarian cancer cells initiated apoptosis, offering valuable insights into the intricate interplay between nanomaterials and cancer biology.

Facile sonochemically-assisted bioengineering of titanium dioxide nanoparticles and deciphering their potential in treating breast and lung cancers: biological, molecular, and computational-based investigations

Combining sonochemistry with phytochemistry is a modern trend in the biosynthesis of metallic nanoparticles (NPs), which contributes to the sustainability of chemical processes and minimizes hazardous effects. Herein, titanium dioxide (TiO2) NPs were bioengineered using a novel and facile ultrasound-assisted approach utilizing the greenly extracted essential oil of Ocimum basilicum. FTIR and UV-Vis spectrophotometry were used to confirm the formation of TiO2 NPs. The X-ray diffraction (XRD) analysis showed the crystalline nature of TiO2 NPs. TEM analysis revealed the spherical morphology of the NPs with sizes ranging from 5.55 to 13.89 nm. Energy-dispersive X-ray (EDX) confirmed the purity of the greenly synthesized NPs. TiO2 NPs demonstrated outstanding antitumor activity against breast (MCF-7) and lung (A-549) cancer cells with estimated IC50 values of 1.73 and 4.79 μg mL-1. The TiO2 NPs were cytocompatible to normal cells (MCF-10A) with a selectivity index (SI) of 8.77 for breast and 3.17 for lung cancer. Biological assays revealed a promising potential for TiO2 NPs to induce apoptosis and arrest cells at the sub-G1 phase of the cell cycle phase in both cancer cell lines. Molecular investigations showed the ability of TiO2 NPs to increase apoptotic genes' expression (Bak and Bax) and their profound ability to elevate the expression of apoptotic proteins (caspases 3 and 7). Molecular docking demonstrated strong binding interactions for TiO2 NPs with caspase 3 and EGFR-TK targets. In conclusion, the greenly synthesized TiO2 NPs exhibited potent antitumor activity and mitochondrion-based cell death against breast and lung cancer cell lines while maintaining cytocompatibility against normal cells.

Innovative microwave-assisted biosynthesis of copper oxide nanoparticles loaded with platinum(ii) based complex for halting colon cancer: cellular, molecular, and computational investigations

In the current study, we biosynthesized copper oxide NPs (CuO NPs) utilizing the essential oils extracted from Boswellia carterii oleogum resin, which served as a bioreductant and capping agent with the help of microwave energy. Afterwards, the platinum(ii) based anticancer drug, carboplatin (Cr), was loaded onto the CuO NPs, exploiting the electrostatic interactions forming Cr@CuO NPs. The produced biogenic NPs were then characterized using zeta potential (ZP), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction spectroscopy (XRD), and Fourier transform infrared spectroscopy (FTIR) techniques. In addition, the entrapment efficiency and release profile of the loaded Cr were evaluated. Thereafter, SRB assay was performed, where Cr@CuO NPs demonstrated the highest cytotoxic activity against human colon cancer cells (HCT-116) with an IC50 of 5.17 μg mL-1, which was about 1.6 and 2.2 folds more than that of Cr and CuO NPs. Moreover, the greenly synthesized nanoparticles (Cr@CuO NPs) displayed a satisfactory selectivity index (SI = 6.82), which was far better than the free Cr treatment (SI = 2.23). Regarding the apoptosis assay, the advent of Cr@CuO NPs resulted in an immense increase in the cellular population percentage of HCT-116 cells undergoing both early (16.02%) and late apoptosis (35.66%), significantly surpassing free Cr and CuO NPs. A study of HCT-116 cell cycle kinetics revealed the powerful ability of Cr@CuO NPs to trap cells in the Sub-G1 and G2 phases and impede the G2/M transition. RT-qPCR was utilized for molecular investigations of the pro-apoptotic (Bax and p53) and antiapoptotic genes (Bcl-2). The novel Cr@CuO NPs treatment rose above single Cr or CuO NPs therapy in stimulating the p53-Bax mediated mitochondrial apoptosis. The cellular and molecular biology investigations presented substantial proof of the potentiated anticancer activity of Cr@CuO NPs and the extra benefits that could be obtained from their use.

PEGylated Chitosan Nanoparticles Loaded with Betaine and Nedaplatin Hamper Breast Cancer: In Vitro and In Vivo Studies

The current study investigates the anticancer effects of PEGylated chitosan nanoparticles (CS NPs) coloaded with betaine (BT) and nedaplatin (ND) on breast adenocarcinoma (MCF-7) cells and breast cancer-bearing rats. Hereof, the ionotropic gelation approach was implemented for the synthesis of PEG-uncoated and PEG-coated CS NPs encompassing either BT, ND, or both (BT-ND). The sizes of the developed BT/CS NPs, ND/CS NPs, and BT-ND/CS NPs were 176.84 ± 7.45, 204.1 ± 13.6, and 201.1 ± 23.35 nm, respectively. Meanwhile, the sizes of the synthesized BT/PEG-CS NPs, ND/PEG-CS NPs, and BT-ND/PEG-CS NPs were 165.1 ± 32.40, 148.2 ± 20.98, and 143.7 ± 7.72 nm, respectively. The surface charges of the fabricated nanoparticles were considerably high. All of the synthesized nanoparticles displayed a spherical form and significant entrapment efficiency. Release experiments demonstrated that the PEGylated and non-PEGylated CS NPs could discharge their contents into the tumor cells' microenvironments (pH 5.5). In addition, the NPs demonstrated an outstanding ability to reduce the viability of the MCF-7 cell line. In addition, BT-ND/PEG-CS NPs were found to be the strongest among all NP preparations, where they caused around 90% decrease in the size of mammary gland tumors in rats compared to vehicle-treated animals.

pH regulated lactose inspired fabrication of zinc oxide nanoparticles for insulin sensing by LSPR absorption

Nanostructured metal oxide particles with diversified morphologies are in high demand in nanotechnology. The particle size, shape, and overall geometry mainly depend on the fabrication method. This study reports synthesis of zinc oxide nanoparticles (ZnO NPs) from zinc nitrate hexahydrate [Zn(NO3)2.6H2O] precursor in aqueous media at 65 °C by using lactose from cow milk as a reducing agent and regulating pH from 6 to 10. UV-visible absorption gave maximum absorbance (λmax) at 371-375 nm in ethanol for localized surface plasmon resonance (LSPR), FTIR exhibited bands at ca. 439-481 cm-1 for stretching mode Zn-O bonds, and XRD peaks at 2 θ values at 31.8, 34.45, and 36.28° confirmed the fabricated ZnO NPs. The XRD spectra also indicated that the ZnO crystallite (20-30 nm) has a hexagonal wurtzite structure. The average particle sizes measured by DLS were ca. 50-837 nm, and SEM microphotographs demonstrated the morphology of ZnO NPs with a hexagonal, rod-shaped, or spike-like structure. The ZnO NPs were used to investigate the LSPR absorption at various concentrations of insulin, ranging from 2.5 μM to 50 μM. The ZnO NPs fabricated at pH 7 and 10 showed better insulin sensing performance with high precision. The synthesis approach of ZnO NPs with variable morphologies would play a significant function in biomedical science especially real time monitoring of glucose for efficient management of diabetes.

Characterization, catalytic, and recyclability studies of nano-sized spherical palladium particles synthesized using aqueous poly-extract (turmeric, neem, and tulasi)

Green synthesis of noble metal nanoparticles (NPs) has gained immense significance compared to other metal ions owing to their unique properties. Among them, palladium 'Pd' has been in the spotlight for its stable and superior catalytic activity. This work focuses on the synthesis of Pd NPs using the combined aqueous extract (poly-extract) of turmeric (rhizome), neem (leaves), and tulasi (leaves). The bio-synthesized Pd NPs were characterized to study its physicochemical and morphological features using several analytical techniques. Role of Pd NPs as nano-catalysts in the degradation of dyes (1 mg/2 mL stock solution) was evaluated in the presence of a strong reducing agent (sodium borohydride; SBH). In the presence of Pd NPs and SBH, maximum reduction of methylene blue (MB), methyl orange (MO), and rhodamine-B (Rh-B) dyes was observed under 20nullmin (96.55 ± 2.11%), 36nullmin (96.96 ± 2.24%), and 27nullmin (98.12 ± 1.33%), with degradation rate of 0.1789 ± 0.0273 min^-1, 0.0926 ± 0.0102 min^-1, and 0.1557 ± 0.0200 min^-1, respectively. In combination of dyes (MB + MO + Rh-B), maximum degradation was observed under 50nullmin (95.49 ± 2.56%) with degradation rate of 0.0694 ± 0.0087 min^-1. It was observed that degradation was following pseudo-first order reaction kinetics. Furthermore, Pd NPs showed good recyclability up to cycle 5 (72.88 ± 2.32%), cycle 9 (69.11 ± 2.19%) and cycle 6 (66.21 ± 2.72%) for MB, MO and Rh-B dyes, respectively. Whereas, up to cycle 4 (74.67 ± 0.66%) during combination of dyes. As Pd NPs showed good recyclability, they can be used for several cycles thus influencing the overall economics of the process.

Co-Delivery of Ylang Ylang Oil of Cananga odorata and Oxaliplatin Using Intelligent pH-Sensitive Lipid-Based Nanovesicles for the Effective Treatment of Triple-Negative Breast Cancer

Smart pH-responsive niosomes loaded with either Oxaliplatin (Ox), Ylang ylang essential oil (Y-oil), or co-loaded with both compounds (Ox-Y) (Ox@NSs, Y@NSs, and Ox-Y@NSs, respectively) were formulated utilizing the thin film method. The developed nanocontainers had a spherical morphology with mean particle sizes lower than 170 nm and showed negative surface charges, high entrapment efficiencies, and a pH-dependent release over 24 h. The prepared pH-responsive niosomes' cytotoxicity was tested against the invasive triple-negative breast cancer (MDA-MB-231) cells, compared to free OX and Y-oil. All niosomal formulations loaded with Ox and/or Y-oil significantly improved cytotoxic activity relative to their free counterparts. The Ox-Y@NSs demonstrated the lowest IC50 (0.0002 µg/mL) when compared to Ox@NSs (0.006 µg/mL) and Y@NSs (18.39 µg/mL) or unloaded Ox (0.05 µg/mL) and Y-oil (29.01 µg/mL). In addition, the percentages of the MDA-MB-231 cell population in the late apoptotic and necrotic quartiles were profoundly higher in cells treated with the smart Ox-Y@NSs (8.38% and 5.06%) than those exposed to free Ox (7.33% and 1.93%) or Y-oil (2.3% and 2.13%) treatments. Gene expression analysis and protein assays were performed to provide extra elucidation regarding the molecular mechanism by which the prepared pH-sensitive niosomes induce apoptosis. Ox-Y@NSs significantly induced the gene expression of the apoptotic markers Tp53, Bax, and Caspase-7, while downregulating the antiapoptotic Bcl2. As such, Ox-Y@NSs are shown to activate the intrinsic pathway of apoptosis. Moreover, the protein assay ascertained the apoptotic effects of Ox-Y@NSs, generating a 4-fold increase in the relative protein quantity of the late apoptotic marker Caspase-7. Our findings suggest that combining natural essential oil with synthetic platinum-based drugs in pH-responsive nanovesicles is a promising approach to breast cancer therapy.

Oral Delivery of Psoralidin by Mucoadhesive Surface-Modified Bilosomes Showed Boosted Apoptotic and Necrotic Effects against Breast and Lung Cancer Cells

This study aims to design and optimize chitosan-coated bilosomal formulations loaded with psoralidin (Ps-CS/BLs) with improved physicochemical properties, oral bioavailability, and boosted apoptotic and necrotic effects. In this regard, uncoated bilosomes loaded with Ps (Ps/BLs) were nanoformulated using the thin-film hydration technique using different molar ratios of phosphatidylcholine (PC), cholesterol (Ch), Span 60 (S60), and sodium deoxycholate (SDC) (1:0.4:0.2:0.125, 1:0.4:0.2:0.25, and 1:0.4:0.2:0.5, respectively). The best-optimized formulation with respect to size, PDI, zeta potential, and EE% was selected and then coated with chitosan at two different concentrations (0.125 and 0.25 w/v%), forming Ps-CS/BLs. The optimized Ps/BLs and Ps-CS/BLs showed a spherical shape and relatively homogenous size with negligible apparent agglomerations. Additionally, it was demonstrated that coating Ps/BLs with chitosan has significantly increased the particle size from 123.16 ± 6.90 in the case of Ps/BLs to 183.90 ± 15.93 nm in the case of Ps-CS/BLs. In addition, Ps-CS/BLs exhibited higher zeta potential (+30.78 ± 1.44 mV) as compared to Ps/BLs (−18.59 ± 2.13 mV). Furthermore, Ps-CS/BL showed enhanced entrapment efficiency (EE%) of 92.15 ± 7.20% as compared to Ps/BLs (68.90 ± 5.95%). Moreover, Ps-CS/BLs exhibited a more sustained release behavior of Ps compared to Ps/BLs over 48 h, and both formulations were best obeying the Higuchi diffusion model. More importantly, Ps-CS/BLs displayed the highest mucoadhesive efficiency% (74.89 ± 3.5%) as compared to Ps/BLs (26.78 ± 2.9%), indicating the ability of the designed nanoformulation to improve oral bioavailability and extend the residence time inside the gastrointestinal tract upon oral administration. Moreover, upon evaluating the apoptotic and necrotic effects of free Ps and Ps-CS/BLs on human breast cancer cell lines (MCF-7) and human lung adenocarcinoma cell lines (A549), there was a dramatic increase in the percentages of the apoptotic and necrotic cell compared to the control and free Ps. Our findings suggest the possible oral use of Ps-CS/BLs in hampering breast and lung cancers.

Green Synthesis of Platinum Nanoparticles for Biomedical Applications

The diverse biological properties of platinum nanoparticles (PtNPs) make them ideal for use in the development of new tools in therapy, diagnostics, and other biomedical purposes. "Green" PtNPs synthesis is of great interest as it is eco-friendly, less energy-consuming and minimizes the amount of toxic by-products. This review is devoted to the biosynthesis properties of platinum nanoparticles based on living organisms (bacteria, fungi, algae, and plants) use. The participation of various biological compounds in PtNPs synthesis is highlighted. The biological activities of "green" platinum nanoparticles (antimicrobial, anticancer, antioxidant, etc.), the proposed mechanisms of influence on target cells and the potential for their further biomedical application are discussed.

Synthesis methods and applications of palladium nanoparticles: A review

Palladium (Pd) is a key component of many catalysts. Nanoparticles (NPs) offer a larger surface area than bulk materials, and with Pd cost increasing 5-fold in the last 10 years, Pd NPs are in increasing demand. Due to novel or enhanced physicochemical properties that Pd NPs exhibit at the nanoscale, Pd NPs have a wide range of applications not only in chemical catalysis, but also for example in hydrogen sensing and storage, and in medicine in photothermal, antibacterial, and anticancer therapies. Pd NPs, on the industrial scale, are currently synthesized using various chemical and physical methods. The physical methods require energy-intensive processes that include maintaining high temperatures and/or pressure. The chemical methods usually involve harmful solvents, hazardous reducing or stabilizing agents, or produce toxic pollutants and by-products. Lately, more environmentally friendly approaches for the synthesis of Pd NPs have emerged. These new approaches are based on the use of the reducing ability of phytochemicals and other biomolecules to chemically reduce Pd ions and form NPs. In this review, we describe the common physical and chemical methods used for the synthesis of Pd NPs and compare them to the plant- and bacteria-mediated biogenic synthesis methods. As size and shape determine many of the unique properties of Pd NPs on the nanoscale, special emphasis is given to the control of these parameters, clarifying how they impact current and future applications of this exciting nanomaterial.

Retrospective analysis of the key molecules involved in the green synthesis of nanoparticles

Emerging nanotechnology leads to success in synthesizing and applying nanoparticles (NPs) using the green-chemistry approach. NPs synthesized using naturally derived materials are a potential alternative to chemical and physical methods because they are simple, cost-effective, eco-friendly, and lower the possibility of hazardous residues being released into the environment. Furthermore, NPs synthesized using the green synthesis approach are stable and biocompatible. However, because natural extracts contain a diverse spectrum of bioactive components, it is difficult to pinpoint the specific component involved in NP formation. Furthermore, the bioactive component contained in the extract changes based on a number of environmental factors; therefore, several studies began with the synthesis of NPs using a pure compound isolated from diverse natural sources. Hence, the present review paper makes an effort to retrospectively analyze the key compounds of the extracts which are responsible for the synthesis of the NPs. The analysis was carried out based on the physicochemical characteristics and biological activities of NPs synthesized from either the extract or the pure compounds. These pure-compound-based NPs were studied for their antimicrobial, antibiofilm, anti-inflammatory, anticancer, and antioxidant properties. In addition, the present review also describes progress in the study of pure compound-based numerous biological activities and the underlying mechanisms of action.

A spotlight on alkaloid nanoformulations for the treatment of lung cancer

Numerous naturally available phytochemicals have potential anti-cancer activities due to their vast structural diversity. Alkaloids have been extensively used in cancer treatment, especially lung cancers, among the plant-based compounds. However, their utilization is limited by their poor solubility, low bioavailability, and inadequacies such as lack of specificity to cancer cells and indiscriminate distribution in the tissues. Incorporating the alkaloids into nanoformulations can overcome the said limitations paving the way for effective delivery of the alkaloids to the site of action in sufficient concentrations, which is crucial in tumor targeting. Our review attempts to assess whether alkaloid nanoformulation can be an effective tool in lung cancer therapy. The mechanism of action of each alkaloid having potential is explored in great detail in the review. In general, Alkaloids suppress oncogenesis by modulating several signaling pathways involved in multiplication, cell cycle, and metastasis, making them significant component of many clinical anti-cancerous agents. The review also explores the future prospects of alkaloid nanoformulation in lung cancer. So, in conclusion, alkaloid based nanoformulation will emerge as a potential gamechanger in treating lung cancer in the near future.

New Green Approaches in Nanoparticles Synthesis: An Overview

Nanotechnology is constantly expanding, with nanomaterials being more and more used in common commercial products that define our modern life. Among all types of nanomaterials, nanoparticles (NPs) occupy an important place, considering the great amount that is produced nowadays and the diversity of their applications. Conventional techniques applied to synthesize NPs have some issues that impede them from being appreciated as safe for the environment and health. The alternative to these might be the use of living organisms or biological extracts that can be involved in the green approach synthesis of NPs, a process that is free of harmful chemicals, cost-effective and a low energy consumer. Several factors, including biological reducing agent concentration, initial precursor salt concentration, agitation, reaction time, pH, temperature and light, can influence the characteristics of biologically synthesized NPs. The interdependence between these reaction parameters was not explored, being the main impediment in the implementation of the biological method on an industrial scale. Our aim is to present a brief review that focuses on the current knowledge regarding how the aforementioned factors can control the size and shape of green-synthesized NPs. We also provide an overview of the biomolecules that were found to be suitable for NP synthesis. This work is meant to be a support for researchers who intend to develop new green approaches for the synthesis of NPs.

Plant-Actuated Micro-Nanorobotics Platforms: Structural Designs, Functional Prospects, and Biomedical Applications

Plants are anatomically and physiologically different from humans and animals; however, there are several possibilities to utilize the unique structures and physiological systems of plants and adapt them to new emerging technologies through a strategic biomimetic approach. Moreover, plants provide safe and sustainable results that can potentially solve the problem of mass-producing practical materials with hazardous and toxic side effects, particularly in the biomedical field, which requires high biocompatibility. In this review, it is investigated how micro-nanostructures available in plants (e.g., nanoparticles, nanofibers and their composites, nanoporous materials, and natural micromotors) are adapted and utilized in the design of suitable materials for a micro-nanorobot platform. How plants' work on micro- and nanoscale systems (e.g., surface roughness, osmotically induced movements such as nastic and tropic, and energy conversion and harvesting) that are unique to plants, can provide functionality on the platform and become further prospective resources are examined. Furthermore, implementation across organisms and fields, which is promising for future practical applications of the plant-actuated micro-nanorobot platform, especially on biomedical applications, is discussed. Finally, the challenges following its implementation in the micro-nanorobot platform are also presented to provide advanced adaptation in the future.

Recent advances on botanical biosynthesis of nanoparticles for catalytic, water treatment and agricultural applications: A review

Green synthesis of nanoparticles using plant extracts minimizes the usage of toxic chemicals or energy. Here, we concentrate on the green synthesis of nanoparticles using natural compounds from plant extracts and their applications in catalysis, water treatment and agriculture. Polyphenols, flavonoid, rutin, quercetin, myricetin, kaempferol, coumarin, and gallic acid in the plant extracts engage in the reduction and stabilization of green nanoparticles. Ten types of nanoparticles involving Ag, Au, Cu, Pt, CuO, ZnO, MgO, TiO₂, Fe₃O₄, and ZrO₂ with emphasis on their formation mechanism are illuminated. We find that green nanoparticles serve as excellent, and recyclable catalysts for reduction of nitrophenols and synthesis of organic compounds with high yields of 83-100% and at least 5 recycles. Many emerging pollutants such as synthetic dyes, antibiotics, heavy metal and oils are effectively mitigated (90-100%) using green nanoparticles. In agriculture, green nanoparticles efficiently immobilize toxic compounds in soil. They are also sufficient nanopesticides to kill harmful larvae, and nanoinsecticides against dangerous vectors of pathogens. As potential nanofertilizers and nanoagrochemicals, green nanoparticles will open a revolution in green agriculture for sustainable development.

Biosynthesis of Platinum Nanoparticles with Cordyceps Flower Extract: Characterization, Antioxidant Activity and Antibacterial Activity

The aim of this work is to develop a green route for platinum nanoparticles (PtNPs) biosynthesized using Cordyceps flower extract and to evaluate their antioxidant activity and antibacterial activity. Different characterization techniques were utilized to characterize the biosynthetic PtNPs. The results showed that PtNPs were spherical particles covered with Cordyceps flower extract. The average particle size of PtNPs in Dynamic Light Scattering was 84.67 ± 5.28 nm, while that of PtNPs in Transmission Electron Microscope was 13.34 ± 4.06 nm. Antioxidant activity of PtNPs was evaluated by DPPH free radical scavenging ability test. The results showed that the antioxidant activity was positively correlated with the concentration of PtNPs, the DPPH scavenging efficiency of PtNPs (0.50–125.00 μg/mL) was 27.77–44.00%. In addition, the morphological changes of four kinds of bacteria (Escherichia coli, Salmonella typhimurium, Bacillus subtilis, Staphylococcus aureus) exposed to PtNPs were observed by scanning electron microscope. The results showed that the antibacterial activity of PtNPs against Gram-negative bacteria was stronger than that of Gram-positive bacteria.

Palladium nanoparticles as emerging pollutants from motor vehicles: An in-depth review on distribution, uptake and toxicological effects in occupational and living environment

Palladium nanoparticles (PdNPs) play an integral role in motor vehicles as the primary vehicle exhaust catalyst (VEC) for tackling environmental pollution. Automobiles equipped with Pd-based catalytic converters were introduced in the mid-1970s and ever since the demand for Pd has steadily increased due to stringent emission standards imposed in many developed and developing countries. However, at the same time, the increasing usage of Pd in VECs has led to the release of nano-sized Pd particles in the environment, thus, emerging as a new source of environmental pollution. The present reports in the literature have shown gradual increasing levels of Pd particles in different urban environmental compartments and internalization of Pd particles in living organisms such as plants, aquatic species and animals. Occupational workers and the general population living in urban areas and near major highways are the most vulnerable as they may be chronically exposed to PdNPs. Risk assessment studies have shown acute and chronic toxicity exerted by PdNPs in both in-vitro and in-vivo models but the underlying mechanism of PdNPs toxicity is still not fully understood. The review intends to provide readers with an in-depth account on the demand and supply of Pd, global distribution of PdNPs in various environmental matrices, their migration and uptake by living species and lastly, their health risks, so as to serve as a useful reference to facilitate further research and development for safe and sustainable technology.

Plant Extract-Based Synthesis of Metallic Nanomaterials, Their Applications, and Safety Concerns

Nanotechnology has attracted the attention of researchers from different scientific fields because of the escalated properties of nanomaterials compared with the properties of macromolecules. Nanomaterials can be prepared through different approaches involving physical and chemical methods. The development of nanomaterials through plant-based green chemistry approaches is more advantageous than other methods from the perspectives of environmental safety, animal, and human health. The biomolecules and metabolites of plants act as reducing and capping agents for the synthesis of metallic green nanomaterials. Plant-based synthesis is a preferred approach as it is not only cost-effective, easy, safe, clean, and eco-friendly but also provides pure nanomaterials in high yield. Since nanomaterials have antimicrobial and antioxidant potential, green nanomaterials synthesized from plants can be used for a variety of biomedical and environmental remediation applications. Past studies have focused mainly on the overall biogenic synthesis of individual or combinations of metallic nanomaterials and their oxides from different biological sources, including microorganisms and biomolecules. Moreover, from the viewpoint of biomedical applications, the literature is mainly focusing on synthetic nanomaterials. Herein, we discuss the extraction of green molecules and recent developments in the synthesis of different plant-based metallic nanomaterials, including silver, gold, platinum, palladium, copper, zinc, iron, and carbon. Apart from the biomedical applications of metallic nanomaterials, including antimicrobial, anticancer, diagnostic, drug delivery, tissue engineering, and regenerative medicine applications, their environmental remediation potential is also discussed. Furthermore, safety concerns and safety regulations pertaining to green nanomaterials are also discussed. This article is protected by copyright. All rights reserved.

Synthesis, Characterization and Host-Guest Complexation of Asplatin: Improved In Vitro Cytotoxicity and Biocompatibility as Compared to Cisplatin

Para-sulfocalix[n]arenes are promising host molecules that can accommodate various chemotherapeutic drugs. Pt(IV)-based complexes, including satraplatin and asplatin, are promising alternatives that overcome the shortcomings of Pt(II) complexes. In this study, asplatin has been synthesized by fusing acetylsalicylic acid (aspirin) and cisplatin. Furthermore, it has been characterized using ¹H NMR, mass spectrometry, elemental analysis, and UHPLC. A host-guest complex of asplatin and p-sulfocalix[4]arene (PSC4) has been developed and characterized using UV, Job’s plot analysis, HPLC, and density functional theory (DFT) calculations. The experimental and computational investigations propose that a 1:1 complex between asplatin and PSC4 is formed. The stability constant of the designed complex has been determined using Job’s plot and UHPLC and computed to be 9.1 × 10⁴ M^–1 and 8.7 × 10⁴ M⁻¹, which corresponds to a free energy of complexation of −6.8 kcal mol^–1, while the calculated value for the inclusion free energy is −13.2 kcal mol⁻¹. Both experimentally and theoretically estimated complexation free energy show that a stable host-guest complex can be formed in solution. The in vitro drug release study displayed the ability of the complex to release its cargo at a cancerous pH (pH of 5.5). Additionally, the asplatin/PSC4 complex is shown to be biocompatible when tested on human skin fibroblast noncancerous cells, demonstrating the highest in vitro cytotoxic activity against (MCF-7), cervical (HeLa), and lung cancer cells (A-549), with IC₅₀ values of 0.75, 2.15, and 3.60 µg/mL, respectively. This is as compared to either cisplatin (IC₅₀ of 5.47, 5.94 and 9.61 µg/mL, respectively) or asplatin (IC₅₀ of 1.54, 5.05 and 3.91 µg/mL, respectively). On the other hand, the free asplatin exhibited higher cytotoxicity on cancerous cells and lower toxicity on noncancerous cells. The outcomes of the present joint theoretical and experimental investigation reinforce the interest in platinum-based anticancer therapeutics when they are protected from undesired interactions and suggest the use of the PSC4 macromolecule as a promising carrier for Pt(IV) anticancer drugs. The formed asplatin/PSC4 inclusion complex may represent an effective chemotherapeutic agent.

Green Nanotechnology: Plant-Mediated Nanoparticle Synthesis and Application

The key pathways for synthesizing nanoparticles are physical and chemical, usually expensive and possibly hazardous to the environment. In the recent past, the evaluation of green chemistry or biological techniques for synthesizing metal nanoparticles from plant extracts has drawn the attention of many researchers. The literature on the green production of nanoparticles using various metals (i.e., gold, silver, zinc, titanium and palladium) and plant extracts is discussed in this study. The generalized mechanism of nanoparticle synthesis involves reduction, stabilization, nucleation, aggregation and capping, followed by characterization. During biosynthesis, major difficulties often faced in maintaining the structure, size and yield of particles can be solved by monitoring the development parameters such as temperature, pH and reaction period. To establish a widely accepted approach, researchers must first explore the actual process underlying the plant-assisted synthesis of a metal nanoparticle and its action on others. The green synthesis of NPs is gaining attention owing to its facilitation of the development of alternative, sustainable, safer, less toxic and environment-friendly approaches. Thus, green nanotechnology using plant extract opens up new possibilities for the synthesis of novel nanoparticles with the desirable characteristics required for developing biosensors, biomedicine, cosmetics and nano-biotechnology, and in electrochemical, catalytic, antibacterial, electronics, sensing and other applications.

Enhanced Anticancer Activity of Nedaplatin Loaded onto Copper Nanoparticles Synthesized Using Red Algae

Marine algae are a rich source of biologically active compounds that can be utilized in various food and pharmaceutical applications. In this study, ultrasound-assisted extraction (UAE) was optimized to maximize yield and total carbohydrate content extracted from the red algae, Pterocladia capillacea. The extract was shown to possess potent antioxidant activity of up to ~70%, and was successfully used as a reducing and capping agent in the green synthesis of copper nanoparticles, which were characterized by UV-spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and dynamic light scattering (DLS). Primarily, CuO nanoparticles with an average size of 62 nm were produced. FTIR spectra for the extract and algal-mediated CuO nanoparticles showed characteristic polysaccharide peaks. The synthesized CuO nanoparticles were subsequently loaded with nedaplatin where UV data suggested a complex formation. Nedaplatin release profiles showed a sustained release that reached a maximum at 120 h. The formulation was shown to have greater cytotoxicity relative to nedaplatin on hepatocellular carcinoma, breast cancer and ovarian cancer cell lines with IC₅₀ values of 0.40 ± 0.08, 1.50 ± 0.12, and 0.70 ± 0.09 µg/mL, respectively. Loading nedaplatin onto CuO nanoparticles synthesized using red algae extract, greatly enhances its anticancer effect.

PEGylated Chitosan Nanoparticles Encapsulating Ascorbic Acid and Oxaliplatin Exhibit Dramatic Apoptotic Effects against Breast Cancer Cells

This study aims to design a pH-responsive dual-loaded nanosystem based on PEGylated chitosan nanoparticles loaded with ascorbic acid (AA) and oxaliplatin (OX) for the effective treatment of breast cancer. In this regard, non-PEGylated and PEGylated chitosan nanoparticles (CS NPs) loaded with either ascorbic acid (AA), oxaliplatin (OX), or dual-loaded with AA-OX were fabricated using the ionotropic gelation method. The hydrodynamic diameters of the fabricated AA/CS NPs, OX/CS NPs, and AA-OX/CS NPs were 157.20 ± 2.40, 188.10 ± 9.70, and 261.10 ± 9.19 nm, respectively. While the hydrodynamic diameters of the designed AA/PEG-CS NPs, OX/PEG-CS NPs, and AA-OX/PEG-CS NPs were 152.20 ± 2.40, 156.60 ± 4.82, and 176.00 ± 4.21 nm, respectively. The ζ-potential of the prepared nanoparticles demonstrated high positive surface charges of +22.02 ± 1.50, +22.58 ± 1.85 and +40.4 ± 2.71 mV for AA/CS NPs, OX/CS NPs, and AA-OX/CS NPs, respectively. The ζ-potential of the PEGylated CS NPs was reduced owing to the shielding of the positive charges by the PEG chains. Additionally, all the prepared nanoparticles exhibited high entrapment efficiencies (EE%) and spherical-shaped morphology. The chemical features of the prepared nanoparticles were investigated using Fourier transform infrared (FTIR) spectroscopy. Release studies showed the capability of the prepared non-PEGylated and PEGylated chitosan NPs to release their cargo in the acidic environment of cancer tissue (pH 5.5). Furthermore, the AA/CS NPs, AA/PEG-CS NPs, OX/CS NPs, OX/PEG-CS NPs, AA-OX/CS NPs and AA-OX/PEG-CS NPs exhibited remarkable cytotoxic activities against breast adenocarcinoma (MCF-7) cells with IC₅₀ values of 44.87 ± 11.49, 23.3 ± 3.73, 23.88 ± 6.29, 17.98 ± 3.99, 18.69 ± 2.22, and 7.5 ± 0.69 µg/mL, respectively; as compared to free AA and OX (IC₅₀ of 150.80 ± 26.50 and 147.70 ± 63.91 µg/mL, respectively). Additionally, treatment of MCF-7 cells with IC₅₀ concentrations of AA, AA/CS NPs, AA/PEG-CS NPs, OX, OX/CS NPs, OX/PEG-CS NPs, AA-OX/CS NPs or AA-OX/PEG-CS NPs increased the percentages of early apoptotic cells to 5.28%, 9.53%, 11.20%, 5.27%, 13.80%, 8.43%, 2.32%, and 10.10%, respectively, and increased the percentages of late apoptotic cells to 0.98%, 0.37%, 2.41%, 2.06%, 0.97%, 9.66%, 56%, and 81.50%, respectively. These results clearly indicate that PEGylation enhances the apoptotic effect of AA and OX alone, in addition to potentiating the apoptotic effect of AA and OX when combined on MCF-7 cells. In conclusion, PEGylated chitosan nanoparticles encapsulating AA, OX, or AA and OX represent an effective formula for induction of apoptosis in MCF-7 cells.

PLGA/PEG Nanoparticles Loaded with Cyclodextrin-Peganum harmala Alkaloid Complex and Ascorbic Acid with Promising Antimicrobial Activities

Antimicrobial drugs face numerous challenges, including drug resistance, systemic toxic effects, and poor bioavailability. To date, treatment choices are limited, which warrants the search for novel potent antivirals, including those extracted from natural products. The seeds of Peganum harmala L. (Zygophyllaceae family) have been reported to have antimicrobial, antifungal, and anticancer activities. In the present study, a 2-hydroxy propyl-β-cyclodextrin (HPβCD)/harmala alkaloid-rich fraction (HARF) host-guest complex was prepared using a thin-film hydration method to improve the water solubility and bioavailability of HARF. The designed complex was then co-encapsulated with ascorbic acid into PLGA nanoparticles coated with polyethylene glycol (HARF-HPßCD/AA@PLGA-PEG NPs) using the W/O/W multiple emulsion-solvent evaporation method. The average particle size, PDI, and zeta potential were 207.90 ± 2.60 nm, 0.17 ± 0.01, and 31.6 ± 0.20 mV, respectively. The entrapment efficiency for HARF was 81.60 ± 1.20% and for ascorbic acid was 88 ± 2.20%. HARF-HPßCD/AA@PLGA-PEG NPs had the highest antibacterial activity against Staphylococcus aureus and Escherichia coli (MIC of 0.025 mg/mL). They also exhibited high selective antiviral activity against the H1N1 influenza virus (IC50 2.7 μg/mL) without affecting the host (MDCK cells). In conclusion, the co-encapsulation of HPCD-HARF complex and ascorbic acid into PLGA-PEG nanoparticles significantly increased the selective H1N1 killing activity with minimum host toxic effects.

A Review on Plant-Mediated Synthesis of Bimetallic Nanoparticles, Characterisation and Their Biological Applications

The study of bimetallic nanoparticles (BNPs) has constantly been expanding, especially in the last decade. The biosynthesis of BNPs mediated by natural extracts is simple, low-cost, and safe for the environment. Plant extracts contain phenolic compounds that act as reducing agents (flavonoids, terpenoids, tannins, and alkaloids) and stabilising ligands moieties (carbonyl, carboxyl, and amine groups), useful in the green synthesis of nanoparticles (NPs), and are free of toxic by-products. Noble bimetallic NPs (containing silver, gold, platinum, and palladium) have potential for biomedical applications due to their safety, stability in the biological environment, and low toxicity. They substantially impact human health (applications in medicine and pharmacy) due to the proven biological effects (catalytic, antioxidant, antibacterial, antidiabetic, antitumor, hepatoprotective, and regenerative activity). To the best of our knowledge, there are no review papers in the literature on the synthesis and characterisation of plant-mediated BNPs and their pharmacological potential. Thus, an effort has been made to provide a clear perspective on the synthesis of BNPs and the antioxidant, antibacterial, anticancer, antidiabetic, and size/shape-dependent applications of BNPs. Furthermore, we discussed the factors that influence BNPs biosyntheses such as pH, temperature, time, metal ion concentration, and plant extract.

Green Synthesis of Pd Nanoparticles for Sustainable and Environmentally Benign Processes

Among transition metal nanoparticles, palladium nanoparticles (PdNPs) are recognized for their high catalytic activity in a wide range of organic transformations that are of academic and industrial importance. The increased interest in environmental issues has led to the development of various green approaches for the preparation of efficient, low-cost and environmentally sustainable Pd-nanocatalysts. Environmentally friendly solvents, non-toxic reducing reagents, biodegradable capping and stabilizing agents and energy-efficient synthetic methods are the main aspects that have been taken into account for the production of Pd nanoparticles in a green approach. This review provides an overview of the fundamental approaches used for the green synthesis of PdNPs and their catalytic application in sustainable processes as cross-coupling reactions and reductions with particular attention afforded to the recovery and reuse of the palladium nanocatalyst, from 2015 to the present.

Characterization, Antimicrobial and Anticancer Properties of Palladium Nanoparticles Biosynthesized Optimally Using Saudi Propolis

Due to their unique physicochemical characteristics, palladium nanoparticles (Pd-NPs) have shown tremendous promise in biological applications. The biosynthesis of Pd-NPs employing Saudi propolis has been designed to be environmental, fast, controlled, and cost-effective. The formation and stability of biosynthesized Pd-NPs by Saudi propolis extract were proved by ultraviolet-visible spectrophotometry (UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), and Zeta potential analysis. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) findings show that the average particle size of Pd-NPs is between 3.14 and 4.62 nm, which is in quantum scale. The Saudi propolis enhanced the antimicrobial activity against B. subtilis, S. aureus, E. coli, K. pneumoniae, and C. albicans. Pd-NPs show effective anticancer activity against ductal carcinoma (MCF-7) with IC50 of 104.79 µg/mL.

Chitosan-Coated PLGA Nanoparticles Loaded with Peganum harmala Alkaloids with Promising Antibacterial and Wound Healing Activities

Wound healing is a major healthcare concern, and complicated wounds may lead to severe outcomes such as septicemia and amputations. To date, management choices are limited, which warrants the search for new potent wound healing agents. Natural products loaded in poly (lactic-co-glycolic acid) (PLGA) coated with chitosan (CS) constitute a promising antibacterial wound healing formulation. In this work, harmala alkaloid-rich fraction (HARF) loaded into PLGA nanoparticles coated with chitosan (H/CS/PLGA NPs) were designed using the emulsion-solvent evaporation method. Optimization of the formulation variables (HARF: PLGA and CS: PLGA weight ratios, sonication time) was performed using the 33 Box-Behnken design (BBD). The optimal NPs were characterized using transmission electron microscopy (TEM) and Attenuated Total Reflection Fourier-Transformed Infrared Spectroscopy (ATR-FTIR). The prepared NPs had an average particle size of 202.27 ± 2.44 nm, a PDI of 0.23 ± 0.01, a zeta potential of 9.22 ± 0.94 mV, and an entrapment efficiency of 86.77 ± 4.18%. In vitro drug release experiments showed a biphasic pattern where an initial burst of 82.50 ± 0.20% took place in the first 2 h, which increased to 87.50 ± 0.50% over 72 h. The designed optimal H/CS/PLGA NPs exerted high antibacterial activity against Staphylococcus aureus and Escherichia coli (MIC of 0.125 and 0.06 mg/mL, respectively) compared to unloaded HARF (MIC of 0.50 mg/mL). The prepared nanoparticles were found to be biocompatible when tested on human skin fibroblasts. Moreover, the wound closure percentage after 24 h of applying H/CS/PLGA NPs was found to be 94.4 ± 8.0%, compared to free HARF and blank NPs (68.20 ± 5.10 and 50.50 ± 9.40%, respectively). In conclusion, the three components of the developed nanoformulation (PLGA, chitosan, and HARF) have synergistic antibacterial and wound healing properties for the management of infected wounds.

Highly Active TiO2 Photocatalysts for Hydrogen Production through a Combination of Commercial TiO2 Material Selection and Platinum Co-Catalyst Deposition Using a Colloidal Approach with Green Reductants

In this contribution, four different commercial TiO2 catalysts (P25, P90, PC105, and PC500) were screened for the photocatalytic production of hydrogen using ethanol as the sacrificial agent. The physico-chemical properties of the TiO2 powders were characterized by using different methods. The photocatalysts mainly vary in the ratio of anatase and rutile phases, and in the surface area. It was found that the photocatalytic activity is governed by the surface area of the photocatalyst. Pure TiO2,PC500 showed the best performance, and in comparison to P25, the activity was more than twenty times higher due to its high surface area of about 270 m2 g−1. For further improvement of the photocatalytic activity, platinum nanoparticles (PtNPs) were immobilized onto TiO2,PC500 using two methods: a colloidal approach and a photodeposition method. For the reduction of the platinum salt precursor in the colloidal approach, different green reducing agents were used in comparison to ascorbic acid. The obtained platinum nanoparticles using natural reductants showed a higher photocatalytic activity due to the formation of smaller nanoparticles, as proven by transmission electron microscopy (TEM). The highest activity was obtained when mangosteen was used as the green reducing agent. Compared to ascorbic acid as a classical reducing agent, the photocatalytic activity of the Pt@TiO2,PC500 prepared with mangosteen was about 2–3 times higher in comparison to other as-prepared photocatalysts. The Pt@TiO2,PC500 catalyst was further studied under different operating conditions, such as catalyst and sacrificial agent concentration.

Platinum and Palladium Complexes as Promising Sources for Antitumor Treatments

There is a need for new, safer, and more effective agents to treat cancer. Cytostatics that have transition metals at their core have attracted renewed interest from scientists. Researchers are attempting to use chemotherapeutics, such as cisplatin, in combination therapy (i.e., in order to enhance their effectiveness). Moreover, studies are being carried out to modify molecules, by developing them into multinuclear structures, linking different compounds to commonly used drugs, or encapsulating them in nanoparticles to improve pharmacokinetic parameters, and increase the selectivity of these drugs. Therefore, we attempted to organize recent drug findings that contain palladium and platinum atoms in their structures.

Betaine host-guest complexation with a calixarene receptor: enhanced in vitro anticancer effect

p-Sulfonatocalix[n]arenes have shown excellent potential for accommodating chemotherapeutic drugs through host-guest complexation and enhancing their anticancer activity. Betaine has been reported to exert an anticancer effect at high concentrations. In order to increase its concentration in cancer cells, we have complexed it with p-SC4, which releases its content in an acidic environment typical of cancer tissue. In this work, a host-guest complex of the chemically stable, natural, and safe active methyl donor (betaine) and p-sulfonatocalix[4]arenes (p-SC4) was designed and characterized using 1H NMR, UV, Job's plot analysis, DFT calculations, and molecular modeling for use in cancer therapeutics. The peak amplitude of the prepared host-guest complexes was linearly proportional to the concentration of betaine in the range of 1.0 × 10-5 M-1 to 2.5 × 10-4 M-1. The reaction stoichiometry between p-SC4 and betaine in the formed complex was 1 : 1. The stability constant for the complex is 8.9 × 104 M-1 which corresponds to a complexation free energy of -6.74 kcal mol-1. Complexation between betaine and p-SC4 was found to involve the insertion of the trimethylammonium group of betaine into the p-SC4 cavity, as supported by the experimental data. The complex displayed enhanced cytotoxic activities against breast adenocarcinoma cells (MCF-7) and cervical cancer cells (HeLa) compared to free betaine. In conclusion, the host-guest complexation of betaine with p-SC4 increases its concentration in cancer cells, which warrants further investigation for cancer therapy.

Peganum harmala Alkaloids Self-Assembled Supramolecular Nanocapsules with Enhanced Antioxidant and Cytotoxic Activities

Amphiphilic macrocycles, such as p-sulfonatocalix[6]arenes (p-SC6), have demonstrated great potential in designing synthetic nanovesicles based on self-assembly approaches. These supramolecular nanovesicles are capable of improving the solubility, stability, and biological activity of various drugs. In the present study, the biologically active harmala alkaloid-rich fraction (HARF) was extracted from Peganum harmala L. seeds. Ultraperformance liquid chromatography-electrospray ionization-tandem mass spectrometry (UPLC/ESI-MS) analysis of HARF revealed 15 alkaloids. The reversed-phase high-performance liquid chromatography (RP-HPLC) analysis revealed three peaks: peganine, harmol, and harmine. The HARF was then encapsulated in p-SC6 nanocapsules employing a thin-film hydration approach. The designed nanocapsules had an average particle size of 264.8 ± 10.6 nm, and a surface charge of -30.3 ± 2.2 mV. They were able to encapsulate 89.3 ± 1.4, 74.4 ± 1.3, and 76.1 ± 1.7% of the three harmala alkaloids; harmine, harmol, and peganine; respectively. The in vitro drug release experiments showed the potential of the designed nanocapsules to release their cargo at a pH of 5.5 (typical of cancerous tissue). The IC₅₀ values of HARF encapsulated in p-SC6 (H/p-SC6 nanocapsules) were 5 and 2.7 μg/mL against ovarian cancer cells (SKOV-3) and breast adenocarcinoma cells (MCF-7), respectively. The prepared nanocapsules were found to be biocompatible when tested on human skin fibroblasts. Additionally, the antioxidant activity of the designed nanocapsules was 5 times that of the free powder fraction; the IC₅₀ of the H/p-SC6 nanocapsules was 30.1 ± 1.3 μg/mL, and that of the HARF was 169.3 ± 7.2 μg/mL. In conclusion, encapsulation of P. harmala alkaloid-rich fraction into self-assembled p-SC6 significantly increases its antioxidant and cytotoxic activities.