In Situ Gelling Ophthalmic Drug Delivery System for the Optimization of Diagnostic and Preoperative Mydriasis: In Vitro Drug Release, Cytotoxicity and Mydriasis Pharmacodynamics

An innovative rheology analysis method applies to the formulation optimization of Panax notoginseng total saponins ocular gel

Emphasizing the viscoelasticity of ophthalmic gels is crucial for understanding the residence time, structure, and stability of hydrogels. This study primarily aimed to propose an innovative rheology analysis method for ophthalmic gels, considering complex eye movements. This method was applied to select ophthalmic gels with favorable rheological characteristics. Additionally, the physical characteristics and in vitro release of the selected Panax notoginseng total saponins (PNS) gel were demonstrated. The selected PNS gel significantly increased the activities of SOD and decreased intracellular levels of MDA, TNF-α, and IL-1β in H2O2-treated ARPE-19 cells. Finally, the optimal formulation was selected as a suitable platform for ophthalmic delivery and was shown to significantly rescue ARPE-19 cells from oxidative cellular damage.

From Preformulative Design to in Vivo Tests: A Complex Path of Requisites and Studies for Nanoparticle Ocular Application. Part 2: In Vitro, Ex Vivo, and In Vivo Studies

The incidence of ocular pathologies is constantly increasing, as is the interest of the researchers in developing new strategies to ameliorate the treatment of these conditions. Nowadays, drug delivery systems are considered among the most relevant approaches due to their applicability in the treatment of a great variety of inner and outer eye pathologies through painless topical administrations. The design of such nanocarriers requires a deep study of many aspects related to the administration route but also a consideration of the authorities and pharmacopeial requirements, in order to achieve a clinical outcome. On such bases, the scope of this review is to describe the path of the analyses that could be performed on nanoparticles, along with the assessment of their applicability for ophthalmic treatments. Preformulation studies, physicochemical and technological characterization, and preliminary noncellular in vitro studies have been described in part 1 of this review. Herein, first the in vitro cellular assays are described; subsequently, nonocular organotypic tests and ex vivo studies are reported, as to present the various analyses to which the formulations can be subjected before in vivo studies, described in the last part. In each step, the models that could be used are presented and compared, highlighting the pros and cons. Moreover, their reliability and eventual acceptance by regulatory agencies are discussed. Hence, this review provides an overview of the most relevant assays applicable for nanocarriers intended for ophthalmic administration to guide researchers in the experimental decision process.

Development of itraconazole ocular delivery system using β-cyclodextrin complexation incorporated into dissolving microneedles for potential improvement treatment of fungal keratitis

Itraconazole (ITZ) is one of the broad-spectrum antifungal agents for treating fungal keratitis. In clinical use, ITZ has problems related to its poor solubility in water, which results in low bioavailability when administered orally. To resolve the issue, we formulated ITZ into the inclusion complex (ITZ-IC) system using β-cyclodextrin (β-CD), which can potentially increase the solubility and bioavailability of ITZ. The molecular docking study has confirmed that the binding energy of ITZ with the β-CD was -5.0 kcal/mol, indicating a stable conformation of the prepared inclusion complex. Moreover, this system demonstrated that the inclusion complex could significantly increase the solubility of ITZ up to 4-fold compared to the pure drug. Furthermore, an ocular drug delivery system was developed through dissolving microneedle (DMN) using polyvinyl pyrrolidone (PVP) and polyvinyl alcohol (PVA) as polymeric substances. The evaluation results of DMN inclusion complexes (ITZ-IC-DMN) showed excellent mechanical strength and insertion ability. In addition, ITZ-IC-DMN can dissolve rapidly upon application. The ex vivo permeation study revealed that 75.71% (equivalent to 3.79 ± 0.21 mg) of ITZ was permeated through the porcine cornea after 24 h. Essentially, ITZ-IC-DMN exhibited no signs of irritation in the HET-CAM study, indicating its safety for application. In conclusion, this study has successfully developed an inclusion complex formulation containing ITZ using β-CD in the DMN system. This approach holds promise for enhancing the solubility and bioavailability of ITZ through ocular administration.

A Nanogel Formulation of Anti-VEGF Peptide for Ocular Neovascularization Treatment

Age-related macular degeneration (AMD) is an eye disorder that can lead to visual impairment in elder patients, and current treatments include repeated injections of monoclonal antibody-based antivascular endothelial growth factor (anti-VEGF) agents. This study investigates the potential of a nanoformulation of a peptide anti-VEGF molecule for neovascular AMD. Anti-VEGF peptide HRHTKQRHTALH (HRH), which has high affinity to VEGF-Fc receptor, was used as the bioactive agent to control neovascularization of the retina. The nanoformulation consisting of hyaluronic acid nanogel was generated by incorporating divinyl sulfone and cholesterol to increase the stability and control the size of the nanodrug. The encapsulation efficacy of nanogel was 65%, and drug release was 34.72% at the end of 192 h. Obtained nanogels were efficiently internalized in 15 min by human umbilical vascular endothelial cells (HUVECs) and ARPE-19 cells, and results indicate that nanoformulation is not toxic to ARPE-19 cells, whereas it inhibits HUVEC proliferation owing to anti-VEGF peptide in the nanogel structure. In the coculture experiment in which retinal penetration was modeled, it was observed that the nanogel reached HUVECs and negatively affected their proliferation without disturbing the monolayer of ARPE-19 cells. In vivo experiments with chick chorioallantoic membrane revealed that nanogel formulation has higher antiangiogenesis activity compared to free HRH. Additionally, in an oxygen-induced retinopathy model, the excessive growth of blood vessels was notably suppressed in mice treated with HRH-loaded nanogel. This research indicates that nanogels formulated in this study are promising candidates as a topical treatment for AMD.

Nanosuspensions in ophthalmology: Overcoming challenges and enhancing drug delivery for eye diseases

This review article provides a comprehensive overview of the advancements in using nanosuspensions for controlled drug delivery in ophthalmology. It highlights the significance of ophthalmic drug delivery due to the prevalence of eye diseases and delves into various aspects of this field. The article explores molecular mechanisms, drugs used, and physiological factors affecting drug absorption. It also addresses challenges in treating both anterior and posterior eye segments and investigates the role of mucus in obstructing micro- and nanosuspensions. Nanosuspensions are presented as a promising approach to enhance drug solubility and absorption, covering formulation, stability, properties, and functionalization. The review discusses the pros and cons of using nanosuspensions for ocular drug delivery and covers their structure, preparation, characterization, and applications. Several graphical representations illustrate their role in treating various eye conditions. Specific drug categories like anti-inflammatory drugs, antihistamines, glucocorticoids, and more are discussed in detail, with relevant studies. The article also addresses current challenges and future directions, emphasizing the need for improved nanosuspension stability and exploring potential technologies. Nanosuspensions have shown substantial potential in advancing ophthalmic drug delivery by enhancing solubility and absorption. This article is a valuable resource for researchers, clinicians, and pharmaceutical professionals in this field, offering insights into recent developments, challenges, and future prospects in nanosuspension use for ocular drug delivery.

Cationic microemulsion of voriconazole for the treatment of fungal keratitis: in vitro and in vivo evaluation

Aim: This investigation aimed to develop a voriconazole-loaded chitosan-coated cationic microemulsion (CVME) to treat fungal keratitis. Methods: Microemulsions were prepared using water titration, and the optimized microemulsion was coated with chitosan to prepare CVME. The physicochemical parameters, ocular irritation potential, in vitro antifungal efficacy and in vitro release studies were performed. The in vivo antifungal efficacy study was conducted in a fungal infection-induced rabbit eye model. Results: The developed CVME displayed acceptable physicochemical properties and excellent mucoadhesive behavior and showed a sustained release profile. Ex vivo and in vivo studies concluded that higher permeability and improved antifungal efficacy were observed for CVME than drug suspension (DS). Conclusion: The prepared CVME7 is a viable alternative to treating fungal keratitis with existing approaches.

Design and evaluation of in situ gel eye drops containing nanoparticles of Gemifloxacin Mesylate

Traditional eye drops used for topically administering drugs have poor ocular bioavailability due to the biological barriers of the eye. There is an interest to design and develop novel drug delivery systems that would extend the precorneal residence time, reduce the frequency of administration and decrease dose-related toxicity. This study aimed to prepare Nanoparticles of Gemifloxacin Mesylate and incorporate them into an in situ gel. The nanoparticles were prepared by ionic gelation technique, using 3² factorial design. Sodium tripolyphosphate (STPP) was used to crosslink Chitosan. The optimized formulation of the nanoparticles (GF4) contained 0.15% Gemifloxacin Mesylate, 0.15% Chitosan and 0.20% STPP, producing 71 nm particle size and 81.11% entrapment efficiency. The prepared nanoparticles showed biphasic release, with an initial burst release of 15% in 1.0 hr and a cumulative drug release of 90.53% at the end of 24 hrs. After that, the prepared nanoparticles were incorporated into an in situ gel, using Poloxamer 407, producing a sustained drug release with efficient antimicrobial activity against gram-positive and gram-negative bacteria as confirmed by the cup plate method.

Factors affecting on in vitro release of miconazole from in situ ocular gel

The reason for conducting this study is to prolong release of miconazole in the ocular site of action by ocular-based gels (OBGs) formulations. The formulation factors affecting on the release from OBG should be studied using various gelling agents in various concentrations to achieve the improvement in retention and residence time in response to prolonged release. In this study, the formulations were prepared using carbopol 940, pectin, sodium alginate, poloxamer 407, and poly(methacrylic acid) at 0.5%, 1%, and 1.5% w/v, respectively. Hydroxypropyl methylcellulose E5 (HPMC E5) 1% was added as thickening agent/viscosity builder. The formulation containing carbopol 940, pectin and sodium alginate at 1.5% w/v, displayed a noticable improvement in viscosity, gelling capacity, and extended release for 7 h in comparison with the reference drug. Overall, the release showed that the sodium alginate with HPMC E5 form in situ gel which had longer time of release reach to 12 h compared with other polymers. the release of miconazole from the OBGs affected significantly by two factors includes gelling capacity and viscosity builder. The novelty of this study is supporting the delivery of ocular drugs through a cornea as an important key of the eye instead of dependence on an internal blood supply using an oral or a parental administration.

Preparation and Characterization of Ion-Sensitive Brimonidine Tartrate In Situ Gel for Ocular Delivery

Brimonidine tartrate (BRT) is a highly selective α2 adrenergic receptor agonist as treatment for patients with open angle glaucoma and high intraocular pressure. The objective of this study was to formulate an ophthalmic ion-sensitive in situ gel (ISG) of BRT to increase the retention time of the drug and its bioavailability. The optimum formulation of 2 mg/mL BRT-ISG was obtained with 0.45% gellan gum as the gel matrix. In vitro release results showed that the water-soluble drug bromonidine tartrate in ocular in situ gels exhibited a high burst effect and fast release in solution. The results of dialysis membrane permeation showed that there was a significant difference between the commercially available and BRT-ISG groups after 45 min. The results of the pre-corneal retention study indicated that gellan gum can effectively prolong ocular surface retention. Preliminary stability results showed that it should be stored in a cool and dark place, and the formulation under long-term preservation can be basically stable. The pharmacokinetic study of the BRT-ISG in the anterior chamber of the rabbit eye was studied by microdialysis technique, and microdialysis samples were analyzed by LC-MS/MS. The pharmacokinetic study showed that the BRT-ISG reached Cmax (8.16 mg/L) at 93 min after administration, which was 2.7 times that of the BRT eye drops, and the AUC(0-t) (1397.08 mg·min/L) was 3.4 times that of the BRT eye drops. The optimal prescription can prolong the retention time of BRT in front of the cornea and significantly improve the bioavailability of BRT in the eye. Combined with the results of in vitro release, permeation and pre-corneal retention studies, the improvement of BRT-ISG bioavailability in rabbit eyes was found to be mainly due to the retention effect after the mixture of ISG and tears.

Novel Eye Drop Delivery Systems: Advance on Formulation Design Strategies Targeting Anterior and Posterior Segments of the Eye

Eye drops are the most common and convenient route of topical administration and the first choice of treatment for many ocular diseases. However, the ocular bioavailability of traditional eye drops (i.e., solutions, suspensions, and ointments) is very low because of ophthalmic physiology and barriers, which greatly limits their therapeutic effect. Over the past few decades, many novel eye drop delivery systems, such as prodrugs, cyclodextrins, in situ gels, and nanoparticles, have been developed to improve ophthalmic bioavailability. These novel eye drop delivery systems have good biocompatibility, adhesion, and propermeation properties and have shown superior performance and efficacy over traditional eye drops. Therefore, the purpose of this review was to systematically present the research progress on novel eye drop delivery systems and provide a reference for the development of dosage form, clinical application, and commercial transformation of eye drops.

New Preservative-Free Formulation for the Enhanced Ocular Bioavailability of Prostaglandin Analogues in Glaucoma

Glaucoma is a wide-spread eye disease caused by elevated intraocular pressure. Uncontrolled, this pressure may lead to damages to the optic nerve. Prostaglandin analogues, such as latanoprost and travoprost (which are water-insoluble active substances), are the most used class of active pharmaceutical ingredient. To administer them as eye drops, preservatives, such as benzalkonium chloride, are used as solubilizers. The latter is known to cause a local inflammation when used chronically and is not recommended for patients with ocular surface disorders. In this work, we sought to use polysorbate 80 (PS80) as a solubilizing agent simultaneously with sodium hyaluronate (NaHA) as a thickener and cytoprotective agent for the corneal surface. The first part of this study assessed the compatibility of the excipients with the active substance, using physicochemical methods such as spectra fluorescence and differential scanning calorimetry (DSC), as well as the solubilization mechanism of PS80 regarding prostaglandin analogues using nuclear magnetic resonance (NMR). The second part evaluated the stability of a formula candidate, its viscosity upon instillation, and its pharmacokinetic profile in rabbits as compared to the commercially approved medicine Travatan®. The results show that sodium hyaluronate is inert with respect to travoprost, while PS80 successfully solubilizes it, meaning that benzalkonium chloride is no longer required. Moreover, the pharmacokinetic profiles of the rabbits showed that the original formula described in the present study enhanced the ocular bioavailability of the drug, making it a promising product to control intraocular pressure with a potential reduced dosage of travoprost, therefore minimizing its related side effects.

In-situ tear fluid dissolving nanofibers enable prolonged viscosity-enhanced dual drug delivery to the eye

Liquid and semi-solid formulations are the most commonly used drug delivery systems for ophthalmic diseases. Upon application into the conjunctival sac, these systems introduce a variable and unphysiologically high liquid volume to the eye, resulting in overflow and extensive nasolacrimal drainage, accounting for dosing inaccuracy and short ocular residence time. In this study, we present nanofibrous electrospun scaffolds composed of biocompatible polymers, overcoming these challenges by immediate drug release. The fibers incorporate gentamicin and dexamethasone, intended for the treatment of bacterial conjunctivitis. Upon contact with the ocular surface, the nanofibers immediately dissolve in the tear fluid, quantitatively releasing the two actives, yielding over92% drug recovery, determined with fluorimetric and chromatographic quantifications methods. Simultaneously, the viscosity of the tear fluid increases, shown by complex viscometry measurements. A newly developed ex vivo microfluidic porcine cornea model was used to evaluated ocular residence time. In contrast to fluid eye drops, the contact time was significantly prolonged and 20min after application, an increase in drug availability on the ocular surface of 342% was observed. Biocompatibility of the polymer system was demonstrated in an OECD approved in vitro cornea model. The antibacterial activity after processing was evaluated according to EUCAST guidelines, and storage stability of the system was confirmed over a 12-week period. This innovative drug delivery system poses a highly promising platform technology, overcoming challenges associated with conventional dosage forms for drug delivery to the anterior eye and thus significantly advancing therapeutic approaches.

Mucoadhesive Polymers Enhance Ocular Drug Delivery: Proof of Concept Study with 0.5% Tropicamide in Dogs

Purpose: To assess the efficacy of 0.5% tropicamide applied after topical administration of 1.4% hydroxyethyl cellulose (HEC) or 1.2% hyaluronic acid (HA) at different time intervals. Methods: Eleven healthy Labrador retriever dogs were used. The study consisted of 7 trials in which pupil diameter (PD) was measured every 30 min for 7 h after drug administration. In trial 1, PD was measured after tropicamide application (control). In trials 2-7, PD was measured after treatment with tropicamide 10 s, 1 and 5 min after application of HEC or HA. Data were analyzed using analysis of variance and post hoc Holm-Sidak tests. Results: Maximal PD (mean ± standard deviation) was significantly greater (P < 0.001) in 5 of 6 experimental trials, with the greatest PD recorded when HEC was applied 1 min (12.2 ± 0.4 mm) and HA 10 s (12.3 ± 0.5 mm) before tropicamide, compared with 11.2 ± 0. 7 mm in control trial 1. PD >10 mm was maintained for 2.75-5 h in trials 2-7 and 2.25 h in trial 1 (P < 0.001). Area under the PD-time curve ranged from 61.9 to 71.3 ± 2.9 mm·hours in trials 2-7, significantly greater than 59.3 ± 1.8 mm·hours in control trial 1 (P ≤ 0.031). Conclusions: Tropicamide efficacy was enhanced by prior administration of a mucoadhesive polymer. Additional studies are needed to determine if HEC and HA of varying concentrations similarly extend and potentiate the effect of other topical ophthalmic drugs in canine eyes.

Pre-Formulation Studies: Physicochemical Characteristics and In Vitro Release Kinetics of Insulin from Selected Hydrogels

Insulin loaded to the polymer network of hydrogels may affect the speed and the quality of wound healing in diabetic patients. The aim of our research was to develop a formulation of insulin that could be applied to the skin. We chose hydrogels commonly used for pharmaceutical compounding, which can provide a form of therapy available to every patient. We prepared different gel formulations using Carbopol^® Ultrez^TM 10, Carbopol^® Ultrez^TM 30, methyl cellulose, and glycerin ointment. The hormone concentration was 1 mg/g of the hydrogel. We assessed the influence of model hydrogels on the pharmaceutical availability of insulin in vitro, and we examined the rheological and the texture parameters of the prepared formulations. Based on spectroscopic methods, we evaluated the influence of model hydrogels on secondary and tertiary structures of insulin. The analysis of rheograms showed that hydrogels are typical of shear-thinning non-Newtonian thixotropic fluids. Insulin release from the formulations occurs in a prolonged manner, providing a longer duration of action of the hormone. The stability of insulin in hydrogels was confirmed. The presence of model hydrogel carriers affects the secondary and the tertiary structures of insulin. The obtained results indicate that hydrogels are promising carriers in the treatment of diabetic foot ulcers. The most effective treatment can be achieved with a methyl cellulose-based insulin preparation.

The Emerging Role of Topical Ocular Drugs to Target the Posterior Eye

The prevalence of chronic fundus diseases is increasing with the aging of the general population. The treatment of these intraocular diseases relies on invasive drug delivery because of the globular structure and multiple barriers of the eye. Frequent intraocular injections bring heavy burdens to the medical care system and patients. The use of topical drugs to treat retinal diseases has always been an attractive solution. The fast development of new materials and technologies brings the possibility to develop innovative topical formulations. This article reviews anatomical and physiological barriers of the eye which affect the bioavailability of topical drugs. In addition, we summarize innovative topical formulations which enhance the permeability of drugs through the ocular surface and/or extend the drug retention time in the eye. This article also reviews the differences of eyes between different laboratory animals to address the translational challenges of preclinical models. The fast development of in vitro eye models may provide more tools to increase the clinical translationality of topical formulations for intraocular diseases. Clinical successes of topical formulations rely on continuous and collaborative efforts between different disciplines.

Ocular microemulsion of brinzolamide: Formulation, physicochemical characterization, and in vitro irritation studies based on EpiOcular™ eye irritation assay

In recent years, the hydrophobic active substances have led researchers to develop new formulations to enhance bioavailability and dissolution rate; brinzolamide, a lipophilic drug belongs to carbonic anhydrase inhibitors, which cause reduction of intraocular pressure in patients suffering from glaucoma. Currently, the marketed product of brinzolamide is in the form of ocular drops; nonetheless, the conventional drops provide decreased therapeutic efficacy owing to their low bioavailability and pulsed drug release. Thus, the development of novel ocular formulations such as topical microemulsions is of high importance. In this work, the preparation of new microemulsions containing brinzolamide (0.2, 0.5 and 1% w/w) and comprised from isopropyl myristate, tween 80 and span 20 and Cremophor EL was performed. The obtained microemulsions were further characterized for their physicochemical properties. In addition, Fourier Transformed-Infrared spectroscopy was used touate the compatibility of active ingredients and components. In vitro release studies along with kinetic modeling were performed using the dialysis membrane method in simulated tear fluid. Bioadhesion studies were performed using Texture analysis. Finally, in vitro ocular irritation based on EpiOcular™ Eye Irritation Test and cytocompatibility studies was performed to examine any possible harm on ocular cells and predict in vivo safety profile.

Ophthalmic In Situ Gels with Balsam Poplar Buds Extract: Formulation, Rheological Characterization, and Quality Evaluation

Balsam poplar buds are a raw material with a high content of polyphenols. Various polyphenols are known for their anti-inflammatory and antioxidant properties. In this study, an aqueous extract of balsam poplar buds was prepared in order to use environmentally friendly and non-aggressive solvents. The aqueous extract was lyophilized, and a 1% aqueous solution of lyophilized balsam poplar buds extract (L1) was prepared. L1 solution was used as a source of polyphenols for the production of ophthalmic in situ gels, so as to develop a product featuring antioxidant properties. Poloxamer 407 (P407) and hydroxypropyl methylcellulose (HPMC) were selected as gelling agents for the in situ gels. In order to select the formulations with the best conditions of use, formulations of different polymer concentrations (P407—10%, 12%, 15%; HPMC—0.5%, 0.75%) were prepared, choosing the same amount of the active polyphenol source L1. The physicochemical properties, rheological parameters, stability, and irritant effect on the rabbit corneal cell line (SIRC) were evaluated. Formulations in which P407 and HMPC concentrations were 10/0.75% and 12%/0.75% reached a gelation point close to the ocular surface temperature; the gels remained stable for 30 days and did not cause an irritant effect on the SIRC cell line.